Related
Hi
I need a help. I was flashed by odin new KitKat rom from samsung website after passed phone restart and stuck on Recovery booting. I cant get any download mode or recovey still this same - only samsung Galaxy note 3 logo and blue info on top"Recovery Booting..." Please help me.
Think I have the same issue.
Followed the guide as quoted in this post; http://forum.xda-developers.com/showpost.php?p=49438067&postcount=402
Downloaded from post; http://forum.xda-developers.com/showpost.php?p=49448237&postcount=443
Can't boot into download mode and it doesn't connect to PC. Just stuck saying "Recovery Booting..."
Edit: I can boot into download mode. Trying the same guide again.
Edit 2: Second flash worked.
sylwek23111 said:
Hi
I need a help. I was flashed by odin new KitKat rom from samsung website after passed phone restart and stuck on Recovery booting. I cant get any download mode or recovey still this same - only samsung Galaxy note 3 logo and blue info on top"Recovery Booting..." Please help me.
Click to expand...
Click to collapse
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Thank you both for help. I fixed. Now i have kitkat with root but is another problem about cwm recovery. I was flashed by odin 6.0.4.5 and was successful but not working on my phone i cant get in. Always when i pressing tree buttons is "RECOVERY BOOTING" and restarting phone and booting system normal. Any advice?
sylwek23111 said:
Thank you both for help. I fixed. Now i have kitkat with root but is another problem about cwm recovery. I was flashed by odin 6.0.4.5 and was successful but not working on my phone i cant get in. Always when i pressing tree buttons is "RECOVERY BOOTING" and restarting phone and booting system normal. Any advice?
Click to expand...
Click to collapse
I found problem. i was flashing cwm 6.0.4.5 but i should 6.0.4.6 now everything fine.:laugh:
sylwek23111 said:
I found problem. i was flashing cwm 6.0.4.5 but i should 6.0.4.6 now everything fine.:laugh:
Click to expand...
Click to collapse
Good news. :good:
orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
thanks for your help, i thought that i will send my note 3 to claim warranty at tomorrow. My phone just stuck at the "recovery booting" after failed in flashing the rom with mobile odin pro.
Nightmare79 said:
Think I have the same issue.
Followed the guide as quoted in this post; http://forum.xda-developers.com/showpost.php?p=49438067&postcount=402
Downloaded from post; http://forum.xda-developers.com/showpost.php?p=49448237&postcount=443
Can't boot into download mode and it doesn't connect to PC. Just stuck saying "Recovery Booting..."
Edit: I can boot into download mode. Trying the same guide again.
Edit 2: Second flash worked.
Click to expand...
Click to collapse
im note able to boot into download mode any help
---------- Post added at 12:50 AM ---------- Previous post was at 12:28 AM ----------
orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
thanks you saved me
HELP!!!!
I JUST TRIED TO JAILBREAK MY PHONE USING CF-Auto-Root-hltetmo-hltetmo-smn900t.zip AND NOW MY PHONE IS STUCK IN RECOVERY MODE. I TOOK THE BATTERY OUT AND TRIED TO BOOT IT UP NORMALLY AND IT WON'T ALLOW ME TO. :crying: WHAT DO I DO????
jmanciaz said:
I JUST TRIED TO JAILBREAK MY PHONE USING CF-Auto-Root-hltetmo-hltetmo-smn900t.zip AND NOW MY PHONE IS STUCK IN RECOVERY MODE. I TOOK THE BATTERY OUT AND TRIED TO BOOT IT UP NORMALLY AND IT WON'T ALLOW ME TO. :crying: WHAT DO I DO????
Click to expand...
Click to collapse
Reflash stock firmware with Odin and after that data reset, then find a custom recovery like this one http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltetmo and flash it with Odin and flash the latest superSU.zip in recovery and you`re rooted.
Guys, I have a problem
I was stuck on recovery rebooting and now i'm on download mode and have problem with uploading stock rom
Odin 1.85 Says "Write operation failed"
On the screen i have "WTITE PROTECTION: ENABLE
And - after "Start" of flashing
"UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2"
please help!
konradciok said:
Guys, I have a problem
I was stuck on recovery rebooting and now i'm on download mode and have problem with uploading stock rom
Odin 1.85 Says "Write operation failed"
On the screen i have "WTITE PROTECTION: ENABLE
And - after "Start" of flashing
"UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2"
please help!
Click to expand...
Click to collapse
What were you trying to do before you get this error?
hey_joe said:
What were you trying to do before you get this error?
Click to expand...
Click to collapse
I was trying to flash custom rom (alexandr) with mobile odin. But first i made CF Auto-Root
Now I have nothing but stock recovery N9005_Stock_Recovery_KK.tar.md5
Phone is rebooting on logo Samsung Galaxy Note 3.
I have access to downlowad mode and to this recovery. And now i don't now what to do...
konradciok said:
Guys, I have a problem
I was stuck on recovery rebooting and now i'm on download mode and have problem with uploading stock rom
Odin 1.85 Says "Write operation failed"
On the screen i have "WTITE PROTECTION: ENABLE
And - after "Start" of flashing
"UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2"
please help!
Click to expand...
Click to collapse
Write the stock 4.4 ROM for your phone in normal Odin.
konradciok said:
I was trying to flash custom rom (alexandr) with mobile odin. But first i made CF Auto-Root
Now I have nothing but stock recovery N9005_Stock_Recovery_KK.tar.md5
Phone is rebooting on logo Samsung Galaxy Note 3.
I have access to downlowad mode and to this recovery. And now i don't now what to do...
Click to expand...
Click to collapse
I suggest you do the following;
First boot into stock recovery and do a factory reset, reboot and see if it boots up to android.
If that doesn't work, you can either odin a custom recovery like TWRP or CWM. Make sure you flash the latest one for KK as I've seen lots of people flashing one for 4.3 when they have a 4.4 bootloader.
Lastly, you can odin the stock firmware for your phone which can be downloaded off sammobile.
orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
Thank you for saving my life, I love you man :laugh:
Thanks!!! Although this tutorial is for a note3 I follow all your recommendations, applied to my note4, and now my phone is working again.
Need help
Hello need help here,
I'm being dumb and fail to root my phone
I try to root my galaxy note 3 by following the step on http://forum.xda-developers.com/galaxy-note-3#root
I downloaded CF-Auto-Root-hlte-hltexx-smn9005 and kies3
However after using odin with check on PDA which is linked to the file in the zip called CF-Auto-Root-hlte-hltexx-smn9005.tar.md5
and check on auto reboot
in odin, it says that my root has pass within 13s
BUT
my device keep looping afterward and
show
Recovery Rebooting....
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
and then turned off
and then show that again
and turn off and show that again and soo on
I tried : removing battery and put it back in, it autoboot even without me pressing the power button and it goes showing above message again.
i tried to press the volume down+home+power button, nothing changed
I desperately need help here
any help is appreciated.
orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
i tried this process which you told but also my samsung galaxy mega lte I9205 stucks on recovery booting. is there any other idea to fix it.
i have samsung galaxy mega lte I9205. i updated it to the new version of kitkat by odin. it became passed but after flashing the rom whenever i open my phone it says recovery booting on the left at the top and frequently gets switch off and opens again and again. i ticked on bootoader update on odin also but it dint fixed the problem. is there any idea to fix it.
Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Khalitas said:
Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Click to expand...
Click to collapse
RESET! is basically the same thing as PASS! What version of TWRP are you installing? The keis screen you got is the same as download mode. Why are you using heimdal? your idea to go with Odin was a good one. Anyways, download TWRP 3.0.2 (not 3.0.2-1 or 3.0.2-2 as they are buggy) and flash it in Odin, reboot to recovery and install the ROM you like, of course following its specific install instructions. No, you cant install a custom rom with stock recovery
Thanks for your answer, meanwhile i managed to fix this problem. Had to flash the latest Firmware because twrp (could just install the oldest version otherwise I had no option to boot into recovery at all) said no OS installed. After rooting via Odin worked like it's supposed to.
Why did I use Heimdall? Because I wanted to stick to CM-wikis instruction and they used Heimdall.
Hi Guys,
today I wanted to flash the latest Stock ROM for my device via ODIN. I've done this many times before and (thought) I knew what I was doing. It is my third Phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly I wasn't aware that this particular device was locked.
After downloading the international firmware I tried to install it and ODIN got stuck while writing the system.img. After that my phone did not boot up (of course). After that I downloaded and tried to isntall the firmware of the carrier, but I had the exact same issue. When I turn my device on I get to an error screen which tells me to execute an "emergency recovery" via the Samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
FRP hinders me to install a custom recovery and the stock one does not allow any isntallations via ADB or SD card.
My qustion is: Does anyone know how I can install a rom from here?
I know that I had to have made some changes prior to the flashing, but as I said I was not aware and an Idiot for not double checking.
Since it is not bricked yet I suppose there must be an answer but I can't find anything.
Thanks in advance
Edit:
After only installing the stock bootloader, I am autmaticly entering it when I boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"
Fix
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
fabivons said:
hi guys,
today i wanted to flash the latest stock rom for my device via odin. I've done this many times before and (thought) i knew what i was doing. It is my third phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly i wasn't aware that this particular device was locked.
After downloading the international firmware i tried to install it and odin got stuck while writing the system.img. After that my phone did not boot up (of course). After that i downloaded and tried to isntall the firmware of the carrier, but i had the exact same issue. When i turn my device on i get to an error screen which tells me to execute an "emergency recovery" via the samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
Frp hinders me to install a custom recovery and the stock one does not allow any isntallations via adb or sd card.
My qustion is: Does anyone know how i can install a rom from here?
I know that i had to have made some changes prior to the flashing, but as i said i was not aware and an idiot for not double checking.
Since it is not bricked yet i suppose there must be an answer but i can't find anything.
Thanks in advance
edit:
After only installing the stock bootloader, i am autmaticly entering it when i boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"
Click to expand...
Click to collapse
have u solved your problem ? This problem i am facing on the s7edge nougat ? Plz help ?
Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might be worth a try!
Good luck!
Fabivons said:
Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might me worth a try!
Good luck!
Click to expand...
Click to collapse
y i have done that and the device boots up but some applications force close and when i insert the memory card , the phone gets restarted everytime
Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Tell us in detail now.
SjDU said:
Tell us in detail now.
Click to expand...
Click to collapse
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?
suhaibahmad said:
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?
Click to expand...
Click to collapse
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.
Fabivons said:
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.
Click to expand...
Click to collapse
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally
suhaibahmad said:
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally
Click to expand...
Click to collapse
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.
Fabivons said:
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.
Click to expand...
Click to collapse
thats your kindness , yes i have performed the factory reset several times from recovery , but when i trying to reset it from settings , it goes after restart to recovery with dm-verity error , then i wipe and factory reset from there
Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model
SjDU said:
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model
Click to expand...
Click to collapse
Well FRP has to be turned off (the button in the menu is called "OEM unlock, the button has to be set to on which deactivates FRP). You don't mention using a PIT file - did you use one?
Got a s7edge, g935F that got stuck in loop. ( stock, no root)
After a factory reset it didn't do nothing.
Now I did a Flash using Odin 3.1.3 and with the latest stock for my device from sammobile . The flash indicates pass but when the system reboots I get a short message that Systemupdate is in progress, then a 'error!' screen with a dead android and a bar that freezes @ 25 %
-Stuck.
-I only can get into Download mode. Recovery mode not working.
-Flashed with BL and without
-Tried other ports and cables.
- tried other stocks.
-tried TWRP for alterative recovery but get a protection error (FRP)
- tried Kies and SmartSwitch but they "don't support" this device ….
Any sugestions or fixes .
xxnedxx said:
Got a s7edge, g935F that got stuck in loop. ( stock, no root)
After a factory reset it didn't do nothing.
Now I did a Flash using Odin 3.1.3 and with the latest stock for my device from sammobile . The flash indicates pass but when the system reboots I get a short message that Systemupdate is in progress, then a 'error!' screen with a dead android and a bar that freezes @ 25 %
-Stuck.
-I only can get into Download mode. Recovery mode not working.
-Flashed with BL and without
-Tried other ports and cables.
- tried other stocks.
-tried TWRP for alterative recovery but get a protection error (FRP)
- tried Kies and SmartSwitch but they "don't support" this device ….
Any sugestions or fixes .
Click to expand...
Click to collapse
I had a similar issue where my FRP became locked and wasn't able to boot into System or flash TWRP. What I did was flash a clean build with Nougat instead of Oreo. Once I was able to boot into System and initialize my phone, I enabled developer settings and enabled OEM unlock which unlocked the FRP. I used the BTU firmware of Nougat by the way. Not sure if this will fix the issue for you but it's worth a shot.
heii70 said:
I had a similar issue where my FRP became locked and wasn't able to boot into System or flash TWRP. What I did was flash a clean build with Nougat instead of Oreo. Once I was able to boot into System and initialize my phone, I enabled developer settings and enabled OEM unlock which unlocked the FRP. I used the BTU firmware of Nougat by the way. Not sure if this will fix the issue for you but it's worth a shot.
Click to expand...
Click to collapse
Well it did something Other then just the "error!" message I got before.
Bootloop to "No command:" screen after Passed flash (Nougat) but still o access into Recovery mode
Now lets search from there …..
xxnedxx said:
Well it did something Other then just the "error!" message I got before.
Bootloop to "No command:" screen after Passed flash (Nougat) but still o access into Recovery mode
Now lets search from there …..
Click to expand...
Click to collapse
...
xxnedxx said:
Well it did something Other then just the "error!" message I got before.
Bootloop to "No command:" screen after Passed flash (Nougat) but still o access into Recovery mode
Now lets search from there …..
Click to expand...
Click to collapse
Are you getting the "no command" error when trying to boot into System or Recovery? Also which did you use the "CSC" or "Home_CSC" file when flashing?
heii70 said:
Are you getting the "no command" error when trying to boot into System or Recovery? Also which did you use the "CSC" or "Home_CSC" file when flashing?
Click to expand...
Click to collapse
I still can't get into recovery mode. ( I wish ) so this is happening when Flashing with CSC latest Nougat . (G935FXXU1BPLB_G935FPHN1BPK1_PHN)
I pass Odin but when the system boots It hangs on No command screen also there I cant enter recovery. (same when trying Home_CSC) ( no need for data recovery )
The first post is when I installed the latest Oreo.
xxnedxx said:
I still can't get into recovery mode. ( I wish ) so this is happening when Flashing with CSC latest Nougat . (G935FXXU1BPLB_G935FPHN1BPK1_PHN)
I pass Odin but when the system boots It hangs on No command screen also there I cant enter recovery. (same when trying Home_CSC) ( no need for data recovery )
The first post is when I installed the latest Oreo.
Click to expand...
Click to collapse
Try different firmware from another region and see if you get different results. The last option is to let your battery completely drain over a course of a few days, that will release the FRP lock. Or you can open your phone and reset the battery connection.
heii70 said:
Try different firmware from another region and see if you get different results. The last option is to let your battery completely drain over a course of a few days, that will release the FRP lock. Or you can open your phone and reset the battery connection.
Click to expand...
Click to collapse
Can i do a frp un lock using CF-autoRoot?
xxnedxx said:
Can i do a frp un lock using CF-autoRoot?
Click to expand...
Click to collapse
No cuz the very fact that FRP is locked means you can't flash anything that's not stock.
---------- Post added at 09:42 PM ---------- Previous post was at 09:35 PM ----------
heii70 said:
Try different firmware from another region and see if you get different results. The last option is to let your battery completely drain over a course of a few days, that will release the FRP lock. Or you can open your phone and reset the battery connection.
Click to expand...
Click to collapse
Also when I said "drain", I really meant it. You have to let the battery die to a point where your phone doesn't respond to anything, not to just to when the phone turns off at 0%. If you are even able to turn on the phone for a brief moment, then the battery still isn't drained enough.
---------- Post added at 10:03 PM ---------- Previous post was at 09:42 PM ----------
xxnedxx said:
I still can't get into recovery mode. ( I wish ) so this is happening when Flashing with CSC latest Nougat . (G935FXXU1BPLB_G935FPHN1BPK1_PHN)
I pass Odin but when the system boots It hangs on No command screen also there I cant enter recovery. (same when trying Home_CSC) ( no need for data recovery )
The first post is when I installed the latest Oreo.
Click to expand...
Click to collapse
G935FXXU1BPLB_G935FPHN1BPK1_PHN is Marshmallow, not Nougat. Here are all the firmware versions for PHN that are Nougat and Oreo, try them all and see if one of them works: https://updato.com/firmware-archive...ugat(Android+7.0),Oreo(Android+8.0.0)&rpp=100 . If not, you are going to have to go with draining the battery.
heii70 said:
No cuz the very fact that FRP is locked means you can't flash anything that's not stock.
---------- Post added at 09:42 PM ---------- Previous post was at 09:35 PM ----------
Also when I said "drain", I really meant it. You have to let the battery die to a point where your phone doesn't respond to anything, not to just to when the phone turns off at 0%. If you are even able to turn on the phone for a brief moment, then the battery still isn't drained enough.
---------- Post added at 10:03 PM ---------- Previous post was at 09:42 PM ----------
G935FXXU1BPLB_G935FPHN1BPK1_PHN is Marshmallow, not Nougat. Here are all the firmware versions for PHN that are Nougat and Oreo, try them all and see if one of them works: https://updato.com/firmware-archive...ugat(Android+7.0),Oreo(Android+8.0.0)&rpp=100 . If not, you are going to have to go with draining the battery.
Click to expand...
Click to collapse
Txs for feedback. Lets try some more flashing form that url . Already did a bunch from sammobile
Still no luck with the firmware's provided by that link.
Some of them Pass Odin Flash without error but when System reboots its ( using AP,BL,CP,CSC)
Blue screen (after short initialize 25 or 32% >> erase >> reboot>>)
- error!
or
- No command
Some of them Fail Odin with message In download mode screen:
- SW REV. CHECK FAIL (BOOTLOADER) DEVICE 2 BINARY 1
So I got a non rooted phone never opened development mode that just crashed into a BootLoop
After Wipe data en Catch attempt>>> "brick"
No recovery mode possible . Only download mode.
In download mode SmartSwitch and Kies see device connected but are not "supporting it" so emergency recovery = no option
"zucht"
heii70 said:
Try different firmware from another region and see if you get different results. The last option is to let your battery completely drain over a course of a few days, that will release the FRP lock. Or you can open your phone and reset the battery connection.
Click to expand...
Click to collapse
Unplugged the battery. Didnt do nuttin on FRP lock.
Still no luck even with some guyz online service.
Loads off error passed by. Stil no luck getting into recovery or getting a firmware installed.
xxnedxx said:
Unplugged the battery. Didnt do nuttin on FRP lock.
Still no luck even with some guyz online service.
Loads off error passed by. Stil no luck getting into recovery or getting a firmware installed.
Click to expand...
Click to collapse
Did you make sure to press and hold the power button for a minute or two to drain any residual electricity after unplugging the battery? Try that and see if that helps.
heii70 said:
Did you make sure to press and hold the power button for a minute or two to drain any residual electricity after unplugging the battery? Try that and see if that helps.
Click to expand...
Click to collapse
Yup Still locked
Screenshot
@xxnedxx Any progress? I have the exact same problem on my G930F. Even dis- and reconnected the battery.
I have the same problem, S7 Edge (G935F) Never ending loop, restarts on 25~32% and goes to no command. Tried different firmwares for 8.0 and I even located the PDA correct firmware, still no luck with it. Recovery doesnt work when I try to enter it I get the error code lines on the black screen. This problem occurred when I tried upgrading from nougat to oreo 8.0 and it went to neverending loop.
xxnedxx said:
Got a s7edge, g935F that got stuck in loop. ( stock, no root)
After a factory reset it didn't do nothing.
Now I did a Flash using Odin 3.1.3 and with the latest stock for my device from sammobile . The flash indicates pass but when the system reboots I get a short message that Systemupdate is in progress, then a 'error!' screen with a dead android and a bar that freezes @ 25 %
-Stuck.
-I only can get into Download mode. Recovery mode not working.
-Flashed with BL and without
-Tried other ports and cables.
- tried other stocks.
-tried TWRP for alterative recovery but get a protection error (FRP)
- tried Kies and SmartSwitch but they "don't support" this device ….
Any sugestions or fixes .
Click to expand...
Click to collapse
hello i had this problem while i was trying to root and unlock the phone
this is what i did hopefully it works for you too
1* download the latest firmware according to your android version
use odin3 v3.13 patched version
2* boot into boot loader
chose Bl on odin and the pit file , uncheck re-partition
and press start , that will get your phone unbrick then flash the ap file and then cp and csc that shoud do the job :good:
Efrencalvario said:
hello i had this problem while i was trying to root and unlock the phone
this is what i did hopefully it works for you too
1* download the latest firmware according to your android version
use odin3 v3.13 patched version
2* boot into boot loader
chose Bl on odin and the pit file , uncheck re-partition
and press start , that will get your phone unbrick then flash the ap file and then cp and csc that shoud do the job :good:
Click to expand...
Click to collapse
sorry my english.
the same for me
all o.k. but i flashed AP,phone say erasing 25%,off,and on,No command
#fail to open recovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKOWN]#
No support SINGLE-SKU
File-Based OTA
Supported API:3
# MANUAL MODE V1.0.0#
E:[libfs_mgr]Blob verification failed:255
E:failed setting up dirty target
failed to mont '/system'(Bad file descriptor)
......
any idea?
I have exactly the same problem with G930FD S7, I dont even have FRP on still whenever I flash stock rom through odin
phone say erasing 25%,off,and on,No command
#fail to open recovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKOWN]#
No support SINGLE-SKU
File-Based OTA
Supported API:3
# MANUAL MODE V1.0.0#
E:[libfs_mgr]Blob verification failed:255
E:failed setting up dirty target
failed to mont '/system'(Bad file descriptor)
I was able to flash TWRP and custom ROMS are working fine but no official ODIN,
---------- Post added at 11:53 PM ---------- Previous post was at 11:44 PM ----------
Efrencalvario said:
hello i had this problem while i was trying to root and unlock the phone
this is what i did hopefully it works for you too
1* download the latest firmware according to your android version
use odin3 v3.13 patched version
2* boot into boot loader
chose Bl on odin and the pit file , uncheck re-partition
and press start , that will get your phone unbrick then flash the ap file and then cp and csc that shoud do the job :good:
Click to expand...
Click to collapse
Can you elaborate further where to find the pit file ?
Hi!
My G-935F is bricked after I downloaded the latest update. Phone is all stock with no mods at all.
Tried to flash the whole phone with Odin, witch worked. But the phone is still stuck in start screen.
I also tried to flash different roms to it but since it is a uprooted phone, that never worked. Is said something like binary 4 device 2. Also tried to flash earlier BL but the phone won't downgrade. It also complains about FRP sometimes when trying to flash different roms.
Download mode is still avalible but I am unable to get in to recovery mode.
Is the phone hardbricked or is there a solution I haven't tried?
Very greatfull for any input.
Removed
ultimatepumperx1 said:
You are fine if you have access to Download mode, just download the Stock firmware from sammobile.com since you have international version just pick your country if you are unable to find exact same country firmware try like germany one but there might be firmware for example Nordic countries and it is just g935f firmware for nordic countries and take sammmobile site and if you are example from germany then get germany version if possible you can still use your phone but you might can't use samsung pay with different country firmware not sure but yea. I guess you are finnish because of the end of your name "lainen" im too
Click to expand...
Click to collapse
That is what I have done all ready. Several times. And there are no problems with the flashing process what so ever. But the phone won't continue to boot beyond the first start-up screen. It is stuck in the first logo that appears when I start the phone.
No I'm actually from Sweden. But neighbours then!
ultimatepumperx1 said:
Hmm, seems strange what we know that your phone isn't hard bricked. Try this
if you are unable to view it i can explain it here so flash whatever country' firmware i recommend your own which is this case sweden so put everything in the odin remember to put CSC instead of HOME_CSC then boot to recovery mode(VOLUME UP+HOME+POWER) hold until you see updating then you should see no command then just wait few seconds to let it think:highfive: think then go vol down to factory reset then power again vol down to the yes! then power again and then go boot to the system using power button and cross fingers!
Click to expand...
Click to collapse
Bro his frp lock is enabled so he can't factory reset it and flashing stock rom succeeds but no boot up. Also unable to flash twrp recovery or boot in normal recovery. We've been looking for a solution but so far no luck
ultimatepumperx1 said:
Okay, sir i know, that he can't flash twrp because of frp lock, but he actually can factory reset trough recovery system if he flashes latest stock rom he will get stock recovery whatever he does, also he has flashed many different firmwares already so i bet there must be recovery
---------- Post added at 07:08 AM ---------- Previous post was at 07:04 AM ----------
You need to factory reset your device, because you have old data of your system, sadly they are unrecoverable, but atleast you don't end up with brick
Click to expand...
Click to collapse
The problem is that I can't get in to recovery mode. If I Could, then I guess there wouldn't be a problem to get the phone up and running. But since I can't, there Is a bigger problem.
Yesterday, when trying different solutions. I tried to get in to recovery mode after a total flash. And then I booted in to a blue screen with the droid on it, and the text underneath it that was saying "erasing".
That was the only change I seen since the phone got bricked. Even if the system erased itself, and I did a total flash afterwards, the system won't boot, and I still can't get in to recovery mode.
Hi, I'm getting exactly the same issue here, almost tried everything, frp lock is enabled i can't acces to recovery menu and i'm unable to flash TWRP, frp lock blocked everything, i can just access to download mode
Please, I need some help with my SM-G9350 Hong-Kong Galaxy S7 edge on Binary 4
I got custom binary blocked by frp lock on SM-G9350 HK Hong-Kong Galaxy S7 edge, and then I flashed stock firmware via Odin and all was just fine and Odin succeed pass, but when installing system updates in recovery it was up to 32% then erasing and then it should boot up system, but it didn't it keeps rebooting to recovery with no options at all, just showing the android guy with no command below and then when I hard it to enter in recovery menu it shows a black screen with some lines that says couldn't open recovery cause unknown and no such file directory, and device is busy, and keep doing the same thing, I did same and flashed again with latest firmware but same thing happened, and then I tried to flash TWRP in order to flash a custom rom but Odin fails and says in download mode custom binary recovery blocked by frp lock, known that my device's bootloader is already unlocked and I flashed before this a whole of stuff, now, I can just access to download mode, otherwise I can't do anything else even no adb , there is no a combination file for the Hong-Kong variant G9350ZH, there is only for the Open-China variant G9350ZC which is not combatible with the device, even there are no adb enabled files, if someone has a solution for this, please kindly take care of this problem
THIS IS REALLY IMPORTANT: I watched too many videos on YouTube and in conclusion flashing stock firmware is enough to get rid of many issues including the frp lock, so, here there are two different S7 edge devices with two different processors and both got the same and exact problem with latest stock rom, what Samsung done with latest firmwares of the Galaxy S7 edge, they made a lot of new devices running pie, and S7 should be old according to them while a lot of S7 users are waiting for a Pie OneUI update, I got some problems earlier but flashing the Old CRH1 solved the issues and now with their latest firmwares all bricks up
Here's what it says in recovery .. attached below, with no usual selection menu at all
ultimatepumperx1 said:
okay so you can boot to recovery if you have stock recovery there, so go to download mode and type to adb "fastboot reboot recovery" and it will boot and you will see droid maybe saying "updating or smth" then no command and let it think for atleast minute and you should be inside recovery after that or just follow vol up and power and home button like i said then just wait minute again when you see the droid.
---------- Post added at 09:25 AM ---------- Previous post was at 09:22 AM ----------
Click to expand...
Click to collapse
I am trying to get adb to work. I dont know how it works but as soon as i open the ADB.EXE file,
the cmd flashes up really quick, with a lot of text in it, just to dissapear again.
I cant get it to stay to type in any commands. The phone, when i am
opening ADB.EXE, is plugged in and in download mode. Is it anything i am doing wrong
or is the phones firmware so corrupt so it doesent recognise it?
And does really ADB work on a phone where debuggning mode is untouched?
ultimatepumperx1 said:
okay so you can boot to recovery if you have stock recovery there, so go to download mode and type to adb "fastboot reboot recovery" and it will boot and you will see droid maybe saying "updating or smth" then no command and let it think for atleast minute and you should be inside recovery after that or just follow vol up and power and home button like i said then just wait minute again when you see the droid.
---------- Post added at 09:25 AM ---------- Previous post was at 09:22 AM ----------
then you have installed wrong firmware make sure to get latest firmware and install it with latest odin.
Latest odin: https://odindownload.com/
and Latest Firmware from https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G9350/
make sure to put your country if possible or what it came with,
Click to expand...
Click to collapse
I'm using the right firmware from sammobile and right latest odin, if it was not the right firmware Odin will never let me flash at all, and it is the country that it came with, unfortunately
So i found this file on the internet
Frp Lock disable flash with odin to ap
Maybe try this
https://www.mediafire.com/file/7du404j8hn8da9n/Exynos.tar/file
Reboot to download mode to check
I haven't tested it
gupt07ash said:
So i found this file on the internet
Frp Lock disable flash with odin to ap
Maybe try this
https://www.mediafire.com/file/7du404j8hn8da9n/Exynos.tar/file
Reboot to download mode to check
I haven't tested it
Click to expand...
Click to collapse
This did not do the trick! Odin fails ond i got a message in red
that said "custom binary (userdata) blocked by frp"
Im testing the other tip with ABD and fastboot. But no luck yet.
ultimatepumperx1 said:
No adb doesn't work but fastboot does which comes in the same folder so what you need to open cmd in the adb.exe file it is normal to flash if you do it like that but you have to navigate to the adb folder and then type fastboot reboot recovery what is basicly does is that it tells fastboot.exe to reboot recovery and this code won't work but you will understand what i mean so "fastboot.exe reboot recovery" don't put ".exe" and it will work like i said before.
Click to expand...
Click to collapse
Think i got he hang of it. But when i am trying to connect to my S7, it cant find y device.
Feels like i am not beeing able to connect to the phone while in download mode.
I have a S6 that i am experimenting with by the side, that is working. Abd are not able to connect
this device either when in download mode. Maybe there is another way around it with this program?
Dampalainen said:
This did not do the trick! Odin fails ond i got a message in red
that said "custom binary (userdata) blocked by frp"
Im testing the other tip with ABD and fastboot. But no luck yet.
Click to expand...
Click to collapse
I'm all out of ideas
Flashing stock rom always does the trick. Maybe try the one from sammobile for your country
gupt07ash said:
I'm all out of ideas
Flashing stock rom always does the trick. Maybe try the one from sammobile for your country
Click to expand...
Click to collapse
I can try. But it feels just like there is somtething wrong with the booting process. Is everything the phone needs to boot, in the BT file that you can flash in ODIN or is there anything else? I mean, if the boot file would work properly, then i would have gotten in to recovery menu.
Dampalainen said:
I can try. But it feels just like there is somtething wrong with the booting process. Is everything the phone needs to boot, in the BT file that you can flash in ODIN or is there anything else? I mean, if the boot file would work properly, then i would have gotten in to recovery menu.
Click to expand...
Click to collapse
Yes ofcourse
Is it the firmware you flashed?
gupt07ash said:
Is it the firmware you flashed?
Click to expand...
Click to collapse
Yes! Thats the one!
Have tried some different solutions this evening and got nothing.
Even used erase NAND option along with the correct PIT file.
Read alot about it before proceeding with NAND erase.
There is no change on the phone after NAND erase.
even though i have made a total flash of the phone afterwards.
Feels like it must be a hardware issue?
Dampalainen said:
Yes! Thats the one!
Have tried some different solutions this evening and got nothing.
Even used erase NAND option along with the correct PIT file.
Read alot about it before proceeding with NAND erase.
There is no change on the phone after NAND erase.
even though i have made a total flash of the phone afterwards.
Feels like it must be a hardware issue?
Click to expand...
Click to collapse
Can't be a hardware issue..
Maybe the old firmware was different than what you're trying to flash. Heck if I were you, I'd try all of them stock roms until it boots up
ultimatepumperx1 said:
Okay, sir i know, that he can't flash twrp because of frp lock, but he actually can factory reset trough recovery system if he flashes latest stock rom he will get stock recovery whatever he does, also he has flashed many different firmwares already so i bet there must be recovery
---------- Post added at 07:08 AM ---------- Previous post was at 07:04 AM ----------
You need to factory reset your device, because you have old data of your system, sadly they are unrecoverable, but atleast you don't end up with brick
Click to expand...
Click to collapse
gupt07ash said:
Can't be a hardware issue..
Maybe the old firmware was different than what you're trying to flash. Heck if I were you, I'd try all of them stock roms until it boots up
Click to expand...
Click to collapse
You mean all the others with different languages?
I was downloading a Norwegian version tonight. I am going to try that one tomorrow.
But since the recovery menu is still missing, it feels like the problem would be in the BL file?
Dampalainen said:
You mean all the others with different languages?
I was downloading a Norwegian version tonight. I am going to try that one tomorrow.
But since the recovery menu is still missing, it feels like the problem would be in the BL file?
Click to expand...
Click to collapse
Yes all the latest firmwares from different regions. Surely something should work
If you do fail, dm a developer. They might have a good solution.
http://forum.gsmhosting.com/vbb/f162/gsm-flasher-frp-reactivation-lock-remover-pro-2200193/
...
https://www.s7fanclub.com/gsm-flasher-pro-frp-tool-for-windows-pc-to-bypass-samsung-frp-lock.html
ultimatepumperx1 said:
I would try smart switch if it will get your recovery working but try everything
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Trying to unlock frp via download mode is last thing you should do, myself i would just find a way to get recovery working.
---------- Post added at 06:33 PM ---------- Previous post was at 06:31 PM ----------
i think your partitions are ****ed up somehow. i think there is way to restore them.
---------- Post added at 06:35 PM ---------- Previous post was at 06:33 PM ----------
have you tried flashing bl with pit file only or ap with pit file only,
---------- Post added at 06:37 PM ---------- Previous post was at 06:35 PM ----------
because pit file stands Partition Information Table (PIT) it might work.
Click to expand...
Click to collapse
I'm having the same and exact problem, nothing worked it sucks up, tried pit fle and even with some cracked boxes to reset frp but nothing worked