Just as the title says, after flashing the bootstack, rom and gapps countless times, i still dont have auto rotate or auto brighness. all the sensors seem to be dead except for wifi, gps and mobile network. did anyone else experience this? how did you resolve it??? please help!!
I had the same problem after dirty flashing from 13.1. I did a factory reset and reflashed and all was well.
whoiswes said:
I had the same problem after dirty flashing from 13.1. I did a factory reset and reflashed and all was well.
Click to expand...
Click to collapse
thanks for the reply. i did a clean flash. didnt work.
i flashed the boostack, rebooted back to recovery, flashed the rom and gapps, wiped cache and rebooted. it boots fine. but then i still dont have auto rotate. seems like the drivers werent installed or something
Obvious questions, but did you check the rotation settings inside the display menu? Also, is Adaptive brightness toggled on?
MiMtnBiker said:
Obvious questions, but did you check the rotation settings inside the display menu? Also, is Adaptive brightness toggled on?
Click to expand...
Click to collapse
i did. i installed an app that checks the phones sensors. they are all undetected. i think its a driver issue. i'm at my wits end
crazynitro said:
i did. i installed an app that checks the phones sensors. they are all undetected. i think its a driver issue. i'm at my wits end
Click to expand...
Click to collapse
Check the md5 on your download to make sure it is not bad Install twrp 3.0.4.0 you could also move everything you want to keep to a sdcard so you can do a total wipe. Now install rom and gapps only and check to see how everything works before adding root or apps.
crazynitro said:
Just as the title says, after flashing the bootstack, rom and gapps countless times, i still dont have auto rotate or auto brighness. all the sensors seem to be dead except for wifi, gps and mobile network. did anyone else experience this? how did you resolve it??? please help!!
Click to expand...
Click to collapse
This is an old thread, but I am hoping you found a fix for these issues. I am having the same issue. If you have a solution to share I would greatly appreciate it.
lkiefer said:
This is an old thread, but I am hoping you found a fix for these issues. I am having the same issue. If you have a solution to share I would greatly appreciate it.
Click to expand...
Click to collapse
I lost my phone so i currently have another one. i can t remember what i did to fix it though
crazynitro said:
I lost my phone so i currently have another one. i can t remember what i did to fix it though
Click to expand...
Click to collapse
That's a drag. Thanks for the quick response though.
Hello, I also have an issue with the accelerometer (and by consequence the auto rotate function).
I am on full stock Nougat B09 (no root) and the issue was also present on B06.
Rebooting the device solve the issue, and factory reset does not make this bug disappear.
That being said, I think I located the root cause.
The magnetometer seems to be never working, even after a reboot. When an app wants to use the magnetometer (like Google map, or the compass), it make the accelerometer crash....
Anyone else having this issue ?
Does you magnetometer works flawlessly ?
Thanks.
@arachneon,
Hi, you can change it in the tools---compass, and in that compass you can waggle the phone in the way of "8", if all that cannot fixed you can also seek help in the nearby ZTE after sales service repair center. Thanks!
Related
Hey guys. Youve got to help me out. All of a sudden my autobrightness function stopped working. What i mean is,if autobrightness box is checked,the brightness will be fixed no matter what,even the slider doesnt have any function,until i untick the box to make it manual. Got any ideas?
Sounds like a software error, have you tried doing a Factory Reset to see if that will fix the problem?
DarkGuyver said:
Sounds like a software error, have you tried doing a Factory Reset to see if that will fix the problem?
Click to expand...
Click to collapse
I have tried factory reset,at first it worked. Then after i flashed a another rom,it stopped again. Flashed back to and fro,stock and custom,factory reset,EVERYTHING! Nothing seem to work now.
In that case I would reflash the stock firmware back onto your device and take it into your local Samsung Repair Center and see if they can fix the problem for you.
Hi, i have a problem, the wifi doesnt turn on i have the POF3 Modem and BOG4 Bootloader, any solution?
thetransit123 said:
Hi, i have a problem, the wifi doesnt turn on i have the POF3 Modem and BOG4 Bootloader, any solution?
Click to expand...
Click to collapse
I am also facing similar issue after i upgraded from 4.4 to 5.0 through Odin. My phone is 32 GB, running BTU/UK unbranded firmware. I rooted it to resolve the issue and tried some fixes like Editing ro.securestorage=true, changed it to ro.securestorage=false but it didn't work. Please help.
Redmax! said:
I am also facing similar issue after i upgraded from 4.4 to 5.0 through Odin. My phone is 32 GB, running BTU/UK unbranded firmware. I rooted it to resolve the issue and tried some fixes like Editing ro.securestorage=true, changed it to ro.securestorage=false but it didn't work. Please help.
Click to expand...
Click to collapse
Install this APP and add some screenshots (IMEI not necessary).
thetransit123 said:
Hi, i have a problem, the wifi doesnt turn on i have the POF3 Modem and BOG4 Bootloader, any solution?
Click to expand...
Click to collapse
I am on Stock Lollipop N9005 and facing this issue that wifi and Bluetooth not turning on. Cache cleared Hard reset phone. Problem persists.
Any help please
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Joku1981 said:
Install this APP and add some screenshots (IMEI not necessary).
Click to expand...
Click to collapse
Hi, thank you for the reply. I did some work on the device and flashed CM 12.1 via TWRP. Wifi worked good in it but I missed S Pen & S health (S Pen Helper Add-On wasn't good in CM 12.1). Hence, i searched about downgrading to 4.4 KitKat only to get back wifi and Stylus both. I have been partially successful in my effort i.e. I have flashed BTU firmware 4.4. and got the Stylus back but wifi problem persists. The wifi button simply does not turn on. It's different from the problem most people face regarding not scanning particular router or forgetting passwords etc. I am just trying to explain so that you guide me to the specific solution. I have tried short code *#0011# and turned OFF power save mode too but it didn't fix either. I liked the CM 12.1 but the trade off with Stylus was not in my favour therefore I had to revert to Stock ROM. So the current state of my device is shown in screenshots attached. Please help!
Joku1981 said:
Install this APP and add some screenshots (IMEI not necessary).
Click to expand...
Click to collapse
Dear Mr. Joku1981,
I have uploaded the screenshots. Would you please care to respond?
Redmax! said:
Dear Mr. Joku1981,
I have uploaded the screenshots. Would you please care to respond?
Click to expand...
Click to collapse
Install this APP and tell me if the WIFI works finally.
Joku1981 said:
Install this APP and tell me if the WIFI works finally.
Click to expand...
Click to collapse
It didn't fix. Problem still persists. Wifi does not turn on at all.
Redmax! said:
It didn't fix. Problem still persists. Wifi does not turn on at all.
Click to expand...
Click to collapse
I had a similar problem. I just installed this APP from playstore. It worked lke a charm. Now i connects to everything. A friend of mine also said that installing this other APP will help. You can try. :highfive:
Joku1981 said:
I had a similar problem. I just installed this APP from playstore. It worked lke a charm. Now i connects to everything. A friend of mine also said that installing this other APP will help. You can try. :highfive:
Click to expand...
Click to collapse
Tried both the applications. Even rooted my phone for the second app to give it access but nothing worked. IMO these apps can only fix when the wifi button is green but the internet connectivity got some issues like resolving DNS etc. In my case, the wifi button stays grey always. It turns dull green when i tap it and goes back to grey again. From the settings menu, when I swipe the wifi icon right to turn it on, it freezes for a while and gets back to left. I can still use Wifi with Custom ROM like CM 12.1 but I can't compromise the S Pen functionality which is why I returned to Stock ROM. In Stock ROM, Data Network & Bluetooth etc. are working fine. It's just the wifi which won't Turn On at all.
Redmax! said:
Tried both the applications. Even rooted my phone for the second app to give it access but nothing worked. IMO these apps can only fix when the wifi button is green but the internet connectivity got some issues like resolving DNS etc. In my case, the wifi button stays grey always. It turns dull green when i tap it and goes back to grey again. From the settings menu, when I swipe the wifi icon right to turn it on, it freezes for a while and gets back to left. I can still use Wifi with Custom ROM like CM 12.1 but I can't compromise the S Pen functionality which is why I returned to Stock ROM. In Stock ROM, Data Network & Bluetooth etc. are working fine. It's just the wifi which won't Turn On at all.
Click to expand...
Click to collapse
Dial *#0011# and select Menu - WIFI. Make an screenshot of what appears there.
Joku1981 said:
Dial *#0011# and select Menu - WIFI. Make an screenshot of what appears there.
Click to expand...
Click to collapse
Here.
Redmax! said:
Here.
Click to expand...
Click to collapse
Press MENU button and select WIFI and make a new screenshot pls.
Wifi sudddenly broken?
I have been using AICP nightlies and everything has been great.... I was looking around in MiXplorer and dropped my phone (pressing many buttons catching it) and now my wifi will not turn on... at first my data wasn't connected either but then I flashed the http://forum.xda-developers.com/devdb/project/dl/?id=11326 and l got my LTE back but still my wifi will not turn on... . Oh yeah, and it says "Google play services error" persistently... I've I also wiped dalvik cache, cache, system and restored the system i had backed up w/ TWRP . No luck. I tried dirty flashing the newest release for hltespr which was the 20150925 from today with GAPPS-LP and no luck.... Whatever I hit in MiXplorer really effed some stuff up I suppose.. I have a full backup I can flash but it was over a week ago and I will lose a bunch of work..... Anyone have any ideas on how to fix this issue w/out formatting and completely wiping and starting over? If I have to go back a week or two it will truly be detrimental. Thanks in advance to any kind sir who will accept this mission!!!:fingers-crossed:
Please I need your help guys.
My OnePlus2 recently started behaving weird. The Bluetooth, WiFi and External speaker just stopped working for no apparent reason. Every other thing is working. 3G works just fine. I am able to make calls through the normal speaker (i.e. by putting the phone to the ear), but if I decide to switch the calls to the loudspeaker, I can't hear anything. Also, if I play music to the external speaker I can't hear anything unless I connect a wired earphone through the jack. When I try to turn ON the Bluetooth and Wifi, they just turn themselves back OFF, so they have become useless.
Please has anyone experienced anything like these before; if yes, please how did you solve it.
isadeiza said:
Please I need your help guys.
My OnePlus2 recently started behaving weird. The Bluetooth, WiFi and External speaker just stopped working for no apparent reason. Every other thing is working. 3G works just fine. I am able to make calls through the normal speaker (i.e. by putting the phone to the ear), but if I decide to switch the calls to the loudspeaker, I can't hear anything. Also, if I play music to the external speaker I can't hear anything unless I connect a wired earphone through the jack. When I try to turn ON the Bluetooth and Wifi, they just turn themselves back OFF, so they have become useless.
Please has anyone experienced anything like these before; if yes, please how did you solve it.
Click to expand...
Click to collapse
Not too sure about the External Speaker issue, but generally whenever I get Bluetooth and WiFi issues exactly like yours in the past - a reset solved the problem.
But I only ever had issues like that if I'm using a Custom ROM.....
Is your 1+2 using OxygenOS by any chance?
LogicalJunkie549 said:
Not too sure about the External Speaker issue, but generally whenever I get Bluetooth and WiFi issues exactly like yours in the past - a reset solved the problem.
But I only ever had issues like that if I'm using a Custom ROM.....
Is your 1+2 using OxygenOS by any chance?
Click to expand...
Click to collapse
Thank you for your help.
What I mean by the External Speaker is the speaker at the bottom of the phone next to the charging port that enable you listen to the audio, either call or music, without putting the phone to your ear.
Yes, I am on the stock Oxygen 2.1.0. I have also restarted and wipe data and cache more than five times but nothing different has happened so far.
Ahh so the loudspeaker is faulty? The loudspeaker and the wireless module are quite separate hardware, so we've got to hope that it's a software fault - rather than both multiple prices of hardware being faulty.
At this stage do a nandroid backup, then Clean Install OxygenOS 2.2.0. If that doesn't solve the issue, just let us know. (If you need specific instructions on how to do the nandroid backup & clean install, just let us know as well).
LogicalJunkie549 said:
Ahh so the loudspeaker is faulty? The loudspeaker and the wireless module are quite separate hardware, so we've got to hope that it's a software fault - rather than both multiple prices of hardware being faulty.
At this stage do a nandroid backup, then Clean Install OxygenOS 2.2.0. If that doesn't solve the issue, just let us know. (If you need specific instructions on how to do the nandroid backup & clean install, just let us know as well).
Click to expand...
Click to collapse
Thanks for your support.
I did a nandroid backup as advised and I downloaded and clean install the Oxygen 2.2.0.
The situation didn't change. Its as if the modules are just not present.
For example, when I try to activate the WiFi or Bluetooth, they are animate as if to turn ON; but after a couple of minutes it simply turn back OFF and grey-out.
I even installed the unofficial CM 13 hoping this might solve the problem, but it remains the same.
Do you think this may in any way be connected with the kernel?
isadeiza said:
Thanks for your support.
I did a nandroid backup as advised and I downloaded and clean install the Oxygen 2.2.0.
The situation didn't change. Its as if the modules are just not present.
For example, when I try to activate the WiFi or Bluetooth, they are animate as if to turn ON; but after a couple of minutes it simply turn back OFF and grey-out.
I even installed the unofficial CM 13 hoping this might solve the problem, but it remains the same.
Do you think this may in any way be connected with the kernel?
Click to expand...
Click to collapse
Hmm no it shouldn't since you clean installed OOS (that should have flashed the stock kernel too).
Give it a try anyway, try flashing @Lord Boeffla kernel for OOS http://www.boeffla-kernel.de/
Just make sure you download the .md5 as well (ensure the download isn't corrupted).
If that fails, try the stock kernel as well http://boeffla.df-kunde.de/oneplus2/stock-kernel/.
If the above doesn't happen, can you do this check for me?
Shake the phone, tap the phone on a desk (aim around the sim card area), be gentle though, all we need is to ascertain if the signal flex cable is loose.....
Once you shaked and tapped the phone, check if the wifi/bluetooth is working? (if not, give it a reset and try again).....
LogicalJunkie549 said:
Hmm no it shouldn't since you clean installed OOS (that should have flashed the stock kernel too).
Give it a try anyway, try flashing @Lord Boeffla kernel for OOS http://www.boeffla-kernel.de/
Just make sure you download the .md5 as well (ensure the download isn't corrupted).
If that fails, try the stock kernel as well http://boeffla.df-kunde.de/oneplus2/stock-kernel/.
If the above doesn't happen, can you do this check for me?
Shake the phone, tap the phone on a desk (aim around the sim card area), be gentle though, all we need is to ascertain if the signal flex cable is loose.....
Once you shaked and tapped the phone, check if the wifi/bluetooth is working? (if not, give it a reset and try again).....
Click to expand...
Click to collapse
Thank you very much for your time @LogicalJunkie549.
I will download the kernel as advised and install it.
I will come with the update after the installation.
LogicalJunkie549 said:
Hmm no it shouldn't since you clean installed OOS (that should have flashed the stock kernel too).
Give it a try anyway, try flashing @Lord Boeffla kernel for OOS http://www.boeffla-kernel.de/
Just make sure you download the .md5 as well (ensure the download isn't corrupted).
If that fails, try the stock kernel as well http://boeffla.df-kunde.de/oneplus2/stock-kernel/.
If the above doesn't happen, can you do this check for me?
Shake the phone, tap the phone on a desk (aim around the sim card area), be gentle though, all we need is to ascertain if the signal flex cable is loose.....
Once you shaked and tapped the phone, check if the wifi/bluetooth is working? (if not, give it a reset and try again).....
Click to expand...
Click to collapse
I have done the suggested steps.
The phone remains the same.
Please see attached the screen shots.
It looks as if these modules/chips just went dead
Flash Oxygen OS Zip via Stock Recovery & Wipe Cache & Data
isadeiza said:
I have done the suggested steps.
The phone remains the same.
Please see attached the screen shots.
It looks as if these modules/chips just went dead
Click to expand...
Click to collapse
For your speakerphone issue, I can bet it is related to the modem/ radio.
Please update to the latest modem/ radio (via fastboot) for your device.
Then test calling again and report back.
Note that this issue and solution is not specific to Oneplus. It is applicable to CM 13 on all devices across manufacturers.
Hit the 'Thanks' button if this solution works for you.
Where can I get the OnePlus 2 Modem/Radio File
s_u_n said:
For your speakerphone issue, I can bet it is related to the modem/ radio.
Please update to the latest modem/ radio (via fastboot) for your device.
Then test calling again and report back.
Note that this issue and solution is not specific to Oneplus. It is applicable to CM 13 on all devices across manufacturers.
Hit the 'Thanks' button if this solution works for you.
Click to expand...
Click to collapse
Thank you for your support.
Please any idea where I can get Modem/Radio file to download.
A link will help, because I have been searching for it but no luck so far.
isadeiza said:
Thank you for your support.
Please any idea where I can get Modem/Radio file to download.
A link will help, because I have been searching for it but no luck so far.
Click to expand...
Click to collapse
Hi Isadeiza, try this modem first (its the 'modem' for MM which might solve the issue finally). https://www.androidfilehost.com/?fid=24415232478675280.
Also try dirty flashing it first, if that doesn't work... Take nandroid then Clean flashing it.
What OxygenOS are you in now btw? As of right now we're up to 2.2.1....
LogicalJunkie549 said:
Hi Isadeiza, try this modem first (its the 'modem' for MM which might solve the issue finally). https://www.androidfilehost.com/?fid=24415232478675280.
Also try dirty flashing it first, if that doesn't work... Take nandroid then Clean flashing it.
What OxygenOS are you in now btw? As of right now we're up to 2.2.1....
Click to expand...
Click to collapse
Thank you. I am currently on OxygenOS 2.2.1
I will try your suggestions and revert back asap.
LogicalJunkie549 said:
Hi Isadeiza, try this modem first (its the 'modem' for MM which might solve the issue finally). https://www.androidfilehost.com/?fid=24415232478675280.
Also try dirty flashing it first, if that doesn't work... Take nandroid then Clean flashing it.
What OxygenOS are you in now btw? As of right now we're up to 2.2.1....
Click to expand...
Click to collapse
Thank you @localjunkie549.
I have tried installing the modem and bluetooth files in the downloaded file in the link.
I am afraid the phone response remains the same.
I even tried installing the new OxygenOS 3.0, still the same.
Speaker working Now. But BT and WiFi still down.
LogicalJunkie549 said:
Hi Isadeiza, try this modem first (its the 'modem' for MM which might solve the issue finally). https://www.androidfilehost.com/?fid=24415232478675280.
Also try dirty flashing it first, if that doesn't work... Take nandroid then Clean flashing it.
What OxygenOS are you in now btw? As of right now we're up to 2.2.1....
Click to expand...
Click to collapse
Hi guys, thank you all for your support.
After a long time, my experience are as below.
After upgrading to OxygenOS 3.0, the behavior of the phone did not change. No sound from loudspeaker, no Bluetooth and no WiFi.
Well I stopped using it until my other phone started heating up so I came back to the OnePlus Two again. One day, I was surprised when the phone started ringing loudly as someone called my line. It worked for about 3 - 4 hours and stopped again. After about 5 days, it came up again for some 4 hours and stopped working again. It does this for over 6 cycles and about 3 days ago it kept working without stopping since.
So I am still observing it for the past three days and it seems to have repented, holding my hopes up high that it will continue to work without hitches again; though I cannot say now what happened, why it stopped working and why it started working now.
The problem of the Bluetooth and WiFi still persist and I still can't use the BT and WiFi. It just behave as if the modules are not present. My fingers crossed expecting them to "miraculously" come back to functional state just as the loudspeaker did on its own.
Thank you all guys for your support.
Hello all!
I have been struggling for a couple of weeks now with my MXP, it suddenly stopped auto rotating everything (All stock apps, desktop, installed apps), tried several fixes including cache cleaning, uninstalling recent updates, sensor fix tool apps (like Quick TuneUp), the issue appeared after the Nougat 7.1.1 update (NDP26.48-24-1) but I don't think it is related to it because it was working fine after I patched with the OTA.
Update: I found out that the accelerometer works correctly using Spirit Level app, I already factory reset my device 2 times with no change.
Hope someone can give me some light!
My x play in that all sensors are not working pls provide some solution....
Silverian said:
[...] my MXP, it suddenly stopped auto rotating everything[...]
Click to expand...
Click to collapse
Did you check settings/display/rotate screen?
Don't know the exact wording, my device shows German.
Awesome kernel. Everything works fine. LOS 14.1
tag68 said:
Did you check settings/display/rotate screen?
Don't know the exact wording, my device shows German.
Click to expand...
Click to collapse
I did, that was the first thing to check.
Just got my OP8 Pro last week and everything was fine until a few days ago. I noticed my screen size is off. It's almost as if it's shrunk. Everything from the top of the screen has dropped about 1mm, so that the camera hole is wrong and the notification bar is below where it should be. I've looked at the dpi, scaling, etc but can't for the life of me find what's changed. Any help would be greatly appreciated.
Did you touch any configurations before that ?
Go to Display > Advanced > Front Camera Display Area and try the option 'hide the front camera' and then go back to 'show the front camera'
see if it fixes the bug.
MoodlePro said:
Did you touch any configurations before that ?
Go to Display > Advanced > Front Camera Display Area and try the option 'hide the front camera' and then go back to 'show the front camera'
see if it fixes the bug.
Click to expand...
Click to collapse
I only set up my phone. I had previously tried switching the front camera display area when I first noticed it was wrong, but it didn't help. Regardless of what settings I use there's always a 1mm or so black area above the status bar.
BRANDENDEUCE said:
I only set up my phone. I had previously tried switching the front camera display area when I first noticed it was wrong, but it didn't help. Regardless of what settings I use there's always a 1mm or so black area above the status bar.
Click to expand...
Click to collapse
It looks like a launcher related problem.
Are you using a custom one of just stock? You could try clearing cache for the launcher in settings - apps and then reboot your phone.
Tell us how it goes.
You might also check your DPI settings (
https://www.reddit.com/r/OnePlus8Pro/comments/jh1x9e
)
Also, if you can take a picture or a screenshot (if it shows) i would highly appreciat it.
MoodlePro said:
Also, if you can take a picture or a screenshot (if it shows) i would highly appreciat it.
Click to expand...
Click to collapse
Using nova or oneplus launcher, it's both the same. I'll see if I can find an extra camera because screenshot doesn't show it
MoodlePro said:
Also, if you can take a picture or a screenshot (if it shows) i would highly appreciat it.
Click to expand...
Click to collapse
Hope this helps.
BRANDENDEUCE said:
Hope this helps.
Click to expand...
Click to collapse
If you're able to do so, clear the cache for both launchers
Update me as always.
MoodlePro said:
If you're able to do so, clear the cache for both launchers
Update me as always.
Click to expand...
Click to collapse
Same as before. I had tried wiping the cache in twrp and it didn't help. I'm trying to get the full zip for the current rom to dirty flash. I'm assuming that will fix the problem, but I can't find anyone who's got it yet.
BRANDENDEUCE said:
Same as before. I had tried wiping the cache in twrp and it didn't help. I'm trying to get the full zip for the current rom to dirty flash. I'm assuming that will fix the problem, but I can't find anyone who's got it yet.
Click to expand...
Click to collapse
it looks like you are not using stock oos or at least some modifications or UI Apps. Some of these apps/mods should be your problem. You are the first on on here reporting this issue so its very likely some of the apps you are using.
I would reset my phone and test every app alone if the issue comes back. Or maybe just deactivate all of them, restart and look what happens.
Stock roms:
[OnePlus 8 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com
Just in case:
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
xtcislove said:
it looks like you are not using stock oos or at least some modifications or UI Apps. Some of these apps/mods should be your problem. You are the first on on here reporting this issue so its very likely some of the apps you are using.
I would reset my phone and test every app alone if the issue comes back. Or maybe just deactivate all of them, restart and look what happens.
Stock roms:
[OnePlus 8 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com
Just in case:
[OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Click to expand...
Click to collapse
I'm using Oxygen OS 11.0.10.10.IN11AA that I updated right after initial setup. Bootloader unlocked and rooted, swift installer for theming. I've in uninstalled the swift mods and it stays the same. I have some magisk modules, but they were active initially before the issue arose. I did look at the thread for the OOS version, but the newest available is for the last version. As soon as I get my hands on the full zip I'll start from scratch and find out what is causing the issue.
BRANDENDEUCE said:
Just got my OP8 Pro last week and everything was fine until a few days ago. I noticed my screen size is off. It's almost as if it's shrunk. Everything from the top of the screen has dropped about 1mm, so that the camera hole is wrong and the notification bar is below where it should be. I've looked at the dpi, scaling, etc but can't for the life of me find what's changed. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I think after all you've tried I would just MSM back then start over.
Hopefully it's just a very weird glitch although my guess is pointing towards hardware and an alignment issue with the screen..was the device new? Or 2nd hand?
If it's the latter then I'd be having a word, obviously after the MSM wipe, you'll be required to unlock the bootloader again and re-root
It's definitely odd.
If the wipe fails then there may be a calibration tool that enables you to bump the alignment of the screen up a bit, I'm sure dpi changes should have an effect (may need a reboot between changes)
Also change from QHD to FHD, I run in FHD and everything has always scaled really well.
So, the latest update was finally released and I dirty flashed it after disabling all my magisk modules and swift theming, but the issue was still there. I factory reset from twrp and it fixed the problem. All swift theming and modules (viper, Dolby digital, acca, oos call recording) are reinstalled with zero problems. The only thing that I can think of that caused it is an app I used to show battery levels around the camera hole, because everything else is the same. It had to have changed something that even after uninstalling and dirty flashing it didn't revert.
BRANDENDEUCE said:
So, the latest update was finally released and I dirty flashed it after disabling all my magisk modules and swift theming, but the issue was still there. I factory reset from twrp and it fixed the problem. All swift theming and modules (viper, Dolby digital, acca, oos call recording) are reinstalled with zero problems. The only thing that I can think of that caused it is an app I used to show battery levels around the camera hole, because everything else is the same. It had to have changed something that even after uninstalling and dirty flashing it didn't revert.
Click to expand...
Click to collapse
Nice one..