Related
[edit]: Succesful root thanks to @mseskir advice [edit]
Hello everyone.
I just replaced my old Samsung Galaxy S3 Mini (i8190) by a new ZTE Blade V220 (nifty hardware at nifty price, EURO 140, WOOT).
I chose it because I didn't want to make a great spent, only to find out that there is no development on this model and that it doesn't even appear on ZTE webpage, so I can't "root" it or change the recovery.
As per Mseskir, this phone is the same than "Avea Intouch 4", a phone sold by a turkish brand.
Below are the hardware details:
- Qualcomm MSM8916 quad core 1'2 Ghz
- 800/900/1800/2100/2600 Mhz CAT 4
- 5" IPS screen (1280 x 720), looks nicer than the super AMOLED S3 mini screen
- 1 Gb RAM + 8 Gb storage (2 gb already spent for OS, even though it brings no bloatware at all)
- Bluetooth 4.0, GPS, WIFI, SD card slot
- 13 Mpx back camera with autofocus, and 5 mpx front camera (not top-notch quality, but good enough for me)
- 2100 mAh battery
- 139 x 71,5 x 9,5 mm (the back is too curvy for most hard covers ).
- Android KITKAT 4.4.4
ROOT steps:
A) I had to use the ZTE ADB drivers bundled with the phone (just mount USB in "driver mode" option
and run the bundled exe in your mobile storage).
The drivers will be installed in "C:\Program Files\ZTE_Handset_USB_Driver". Remember this directory.
B) Download "Root-SuperSU-v2.37.zip" from file from mseskir's yandex drive, within the "root"
folder. You can find the link in his post below. Upload without unzipping to your mobile internal memory.
You will need it later.
C) Download the "IT4_Recovery_Yukleme_Programı.exe" file from mseskir's yandex drive, within the "root"
folder. You can find the link in his post below.
D) Unzip "IT4_Recovery_Yukleme_Programı.exe" and get "recovery.img" (recover with TWRP) or
"recovery_stock.img" (if you prefer stock recovery) from the "tools" folder.
I will use "recovery.img" because I have been using TWRP since my old Xperia Neo V.
Copy the your "recovery.img" of choice to the folder where the USB ADB drivers was installed.
Copy the "fastboot.exe" file there too.
E) Enable "USB ADB debug" in android "Developer Options". Ensure that Windows detects and installs
the drivers properly.
F) Open command prompt and go to "C:\Program Files\ZTE_Handset_USB_Driver"
G) Type "adb devices", if everything goes well you will see your phone serial number listed
there. If you receive some error while starting the daemon, ensure that no other ADB app
is running in the background or try another ADB drivers.
You can check your phone serial number in the mobile itself: Phone Information --> Status
H) Type "adb reboot bootloader" in command prompt. The phone will reboot and will get stuck in boot image
with the notification led in red (scary, but don't worry, it's all fine).
I) Type "fastboot devices" in command prompt. You will see again the phone serial number in the window.
The phone screen will remain unchanged, like if it where frozen, but don't worry, everything is still fine.
J) Ensure that you have copied "recovery.img" in the same folder than adb.exe and fastboot.exe
( "C:\Program Files\ZTE_Handset_USB_Driver", as I mentioned earlier).
Then, type "fastboot flash recovery recovery.img". If you copied the "recovery.img" and the "fastboot.exe"
to the driver folder you will see the flash progress. It will take one or two seconds and give you an "ok" message.
K) Type "fastboot reboot" and the mobile will reboot. Let it boot till the end. Disconect USB cable and
shutdown the mobile completely.
L) Push and maintain "volume up". While you maintain "volume up", push "power" button a few seconds
to start the mobile. Keep maintaining "volume up" until TWRP boot screen appears.
M) Flash "Root-SuperSU-v2.37.zip" with TWRP. You should have already copied it to mobile storage if you followed my advice in point "B". Reboot to system and it's done.
I leave this here so if anyone searches for this phone like me, he will know how to succesfully root it.
Thanks to everyone in advance.
Root
Hi, your phone is same like my phone "avea intouch 4" this is my files link
https://yadi.sk/d/8GHocBtnfTp7A
Go to root folder, download the IT4_recovery_yukleme_programi.exe
Run it, turn usb debugging on in your phones devoloper options then connect your phone select twrp recovery yukleme in the programs menu, a message will pop up on your phone, select "ok" then it will reboot to bootloader and flash twrp recovery to device. After reboot open the twrp recovery and firstly backup your device to sdcard1 and copy it to your pc then install supersu package from my root folder. Thats all.
But first you must install drivers.
If anything goes wrong i will help you as i can.
If you cant use the program (its language is Turkish) i will make an english program tomorrow.
---------- Post added at 04:02 PM ---------- Previous post was at 03:48 PM ----------
Our Turkish forum link is
http://mobile.donanimhaber.com/showTopic.asp?m=100770257&p=1
We are trying to port roms. And i'm using a custom rom right now.
mseskir said:
Hi, your phone is same like my phone "avea intouch 4" this is my files link
Go to root folder, download the IT4_recovery_yukleme_programi.exe
.... /QUOTE]
Thanks @mseskir, I have tried it without luck.
When using option 2, I receive "sonraki asamaya gecmiyorsa suruculeri tekrar yukleyiniz" which means
something like "Your driver does not pass to the next stage reload".
So I uninstalled the ADB drivers that came bundled within the phone storage, and installed the ones on your link,
but still the same even after reboot and complete clean.
Any suggestion?.
Click to expand...
Click to collapse
Ok. Can you try this;
open my exe file with 7zip and extract
open tools folder
click right mouse button with shift (from keyboard) pressed
select open command prompt here
in command prompt;
type adb device
on your phone screen a warning will pop up, select ok
then you will see your phones serial number in cmd window
then type;
adb reboot bootloader
your phone will reboot to bootloader,
type;
fastboot devices
if you cant see serial number; go to my yandex folder, in tools folder; AdbDriverInstaller.exe download it and run it. it will install the fastboot drivers
then type "fastboot devices" again, if you can see your serial number type;
fastboot flash recovery recovery.img
then type "fastboot reboot"
if you dont want twrp recovery you can use cwm recovery, it is inside my root folder IT4_Root_Anlatımı.zip (extract it, there is cwm recovery)
if something goes wrong tell me..
mseskir said:
Ok. Can you try this;
open my exe file with 7zip and extract...
Click to expand...
Click to collapse
I got TWRP (i'm used to it) working and root by working following your instructions, thank you very much.
But I have had to use my own adb files taken from zte drivers installer (bundled with the mobile)
as replacement from the ones bundled in your zip file, which always errored out for me when trying
to start the service.
The only scary moment was when I issued "adb reboot bootloader" and the mobile got stuck on ZTE boot image. I was waiting for a while for bootloader to appear, but it didn't happen, so I proceed with next step.
When I have some time tomorrow or weekend, I will update the first post for the proper steps to attain root.
helpful thanks
lollipop update
avea intouch4 original 5.0 update files
http://www.avea.com.tr/web/android5update/update.zip
How to update zte blade v220 Download update zip that link. And move sdcard then settings-Phone information-System updates and press OK
It shows recovery wait here.
Later Phone will start and 'll boot 5.0.2
I would advice to avoid updating the phone to V5.0.2 with the update file because of the following:
A) You will lose your existing root. You will have to root again Use http://www.kingroot.net/ for easy and clean root.
B) You will have trouble connecting to previously working WLAN networks (I'm suffering it right now, lots of people complaining about this, just click here "https://www.google.es/webhp?sourcei...8#q=android 5.0.2 wifi authentication problem" to see what I mean). Using "Wifi Fixer" app it sometimes works well, sometimes it disconnects itself, I need to check further.
C) Only English, German, French and Turkish languages are available in the update. Although I miss the Spanish language, I could live with english. Partly fixed with "Set Locale and Language" app from Google Play
D) I'm still trying to figure out how to flash TWRP to restore my 4.4.4 backup.
E) Fastboot support with 5.0.2 is crimpled so I can't use it to reflash TWRP. I can't seem to find a valid TWRP version to flash with "TWRP manager" either.
F) Don't know if it's a bug or not, but screen switches on and off when idle and locked without any reason that I can find. It bothers me a lot!.
G) Just discovered that this update also locks bootloader. That's the reason I can't flash recovery.img back.
Be warned.
I give up with this!
Well, after a few days trying different solutions to install a TWRP recovery to recover my stock backup, I have messed it up to the point that I'm now stuck in the following status:
The phone gets stuck in bootloop with Avea logo. It heats up a lot but doesn't boot no matter how long you wait.
Before messing it up, I managed to install Phil6 recovery version 6.57.9 (I still can access it with VOL+ and power button).
This Phil6 version I got seems to be compiled for "sprout" hardware, so it will always error up when trying to flash roms for msm8916 hardware.
Any other roms I try to flash that don't error up with sprout message will always fail with "error: 0". I have tested a few roms with two different SD cards, so it's not a badly downloaded rom.
Restoring my TWRP backup with Phil6 doesn't error out, but the phone still doesn't pass the avea logo.
I first went for a 6" Sony Xperia C5 Ultra, but the main camera quality was terrible and it heated up a lot, enough to unglue the screen protector.
So I returned it to the shop and picked a Huawei Ascend P8.
Much better hardware than V220, much better still camera, slightly worse video recording quality (IMHO), and twice as expensive as the V220, but it really flies compared to the V220, gentlemen.
Thanks everyone.
Thanks to @ozgurharan's rom, I have been able to bring back to life my ZTE Blade V220.
This is his rom's link, I got his permission to post it here: https://yadi.sk/d/uv3bhb0knX8nn
Too bad that I still can't restore my TWRP backup or the original KitKat rom with spanish language, but something is better than nothing.
Be warned that this rom has only English, French, Turkish and Deutsch languages.
Thanks a lot @ozgurharan
Hello. I have already upgraded my Avea In Touch 4 to 5.0.2 before reading this post. Now I cannot root my phone. I have followed every step on this post but in bootloader mod when I try fastboot flash recovery the recovery.img I get an error like "writing recovery... failed (remote: unknown command). I tried to install the last rom you have shared but still not working. I just want to root my phone and have the last version of stock rom for my phone if avaliable. Can you please help me?:crying::crying::crying:
TheSuburban said:
Hello. I have already upgraded my Avea In Touch 4 to 5.0.2 before reading this post. Now I cannot root my phone. I have followed every step on this post but in bootloader mod when I try fastboot flash recovery the recovery.img I get an error like "writing recovery... failed (remote: unknown command). I tried to install the last rom you have shared but still not working. I just want to root my phone and have the last version of stock rom for my phone if avaliable. Can you please help me?:crying::crying::crying:
Click to expand...
Click to collapse
Use kingroot. It worked for me.
@mseskir, do you happen to still have the previous TWRP version for Avea Intouch 4 (I think it was 2.7.0.3 or around it)?.
I have flashed your current TWRP 2.8.6.1 to root the phone but this version can't mount SD card, so I can't flash zip files from SD card.
The File Explorer shows SD card as 0 Mb, but if I boot the phone SD card is recogniced and will work well.
Or if you have a newer version than 2.8.6.1 that doesn't fail to mount SD card will be fine too.
NOTE: Long story short with my previous struggles with Blade V220 and horrible Android 5.0.2 update. Doing some tests I did a very bad flash and f##ked the phone completely,
so I had to send it to ZTE tech support. The phone was still on warranty so they replaced the phone PCB with a new one that has Android 4.4.4.
Thanks in advance.
Hi Guys.
Does anyone know if it is possible to root the P8 Max.
Thanks in advance.
I am also interested in this
+1
Not yet
I saw some guy posting in his blog on howto root p8 max
http://blog.livedoor.jp/cn221283/archives/51190024.html
Can somebody help to translate this, using google map doesnt help hehe..
dodzs said:
I saw some guy posting in his blog on howto root p8 max
http://blog.livedoor.jp/cn221283/archives/51190024.html
Can somebody help to translate this, using google map doesnt help hehe..
Click to expand...
Click to collapse
* i meant google translate
dodzs said:
* i meant google translate
Click to expand...
Click to collapse
The method only applies to P8 and the author says it might not be applicable to Max as the recovery is P8.
However, just for the record
1. Unlock the bootloader
http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
2. Fastbboot custom recovery *Need to create a TWRP recovery for the P8 Max
3. Root
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
4. Profit!
Leechoonhwee said:
The method only applies to P8 and the author says it might not be applicable to Max as the recovery is P8.
However, just for the record
1. Unlock the bootloader
http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
2. Fastbboot custom recovery *Need to create a TWRP recovery for the P8 Max
3. Root
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
4. Profit!
Click to expand...
Click to collapse
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
dodzs said:
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
So you mean that you can't enter system wile twrp is flashed??weard
rowihel2012 said:
So you mean that you can't enter system wile twrp is flashed??weard
Click to expand...
Click to collapse
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
dodzs said:
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
Click to expand...
Click to collapse
ok we just have to wait for twrp recovery worknig well with max
is the speaker really good?do you like it?
dodzs said:
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
Click to expand...
Click to collapse
Instead of flashing the recovery to the phone you can just boot it one time. Just use fastboot boot recovery.img instead. This will load twrp and not flash it.
Sent from my C6806_GPe using Tapatalk
rowihel2012 said:
ok we just have to wait for twrp recovery worknig well with max
is the speaker really good?do you like it?
Click to expand...
Click to collapse
Speaker is damn good... but when playing games or watching movie, it is covered by the hand... so it would be better if the speaker is front facing..
otherwise it's good... but I do hate EMUI though... its making the experience sluggish...
Im try to unlock my p8max, when using Huawei unlock site dont allow unclock because log in by email account, they requested register with phone number, but im not in listed countries for receive a confirmation code by phone.
Who have registered Huawei account by phone please share,
Thanks
quynh2v said:
Im try to unlock my p8max, when using Huawei unlock site dont allow unclock because log in by email account, they requested register with phone number, but im not in listed countries for receive a confirmation code by phone.
Who have registered Huawei account by phone please share,
Thanks
Click to expand...
Click to collapse
Send an email to [email protected], with this in the mail :
Hello Huawei,
I would like to request the bootloader unlock code for my Huawei <phone version>
IMEI : xxxxxxxxxxxxxx
S/N : xxxxxxxxxxxxxxx
Product-ID : xxxxxxxxxxx
Regards, xxxxxxxxxxxxx
Click to expand...
Click to collapse
dodzs said:
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
Click to expand...
Click to collapse
the stock recovery located in folder is chines how can we make it english?
rowihel2012 said:
the stock recovery located in folder is chines how can we make it english?
Click to expand...
Click to collapse
The stock recovery when it's launched, it's in English, dun worry I have re-flashed it as I mentioned in the prev post..
Anyway the stock recovery is extracted from the current available ROM for P8 Max, which is in chinese. There is no international ROM available yet for this phone.
dodzs said:
The stock recovery when it's launched, it's in English, dun worry I have re-flashed it as I mentioned in the prev post..
Anyway the stock recovery is extracted from the current available ROM for P8 Max, which is in chinese. There is no international ROM available yet for this phone.
Click to expand...
Click to collapse
so did you find working twrp recovery? i managed to flash it and install root and boot only one time
i could not boot so system again so i flashed the stock
is this a hoax?
http://www.guruswizard.com/2015/06/how-to-root-huawei-p8-max.html
BTW, I can't get fastboot working on my PC. When I put the phone in fastboot mode, my pc cant detect the device.
Root Huawei P8 Max 5.1.1
hi,
So, what is the real WORKING procedure to root our Huawei P8 Max with android version 5.1.1 ?
Thank you in advance for answering.
Hi,
I have a problem. I tried to flash stock rom, but I forgot about hifi image.
There's a photo of my phone.
imgur.com/aVUBTRD
I have unlocked bootloader, but I can't flash hifi. "Command not allowed."
I tried method with put microsd card with update.app in dload into smartphone and I when I pressed power button
and VOLUME UP and VOLUME DOWN nothing happened.
I tried just flash all partitions separately, with huawei update extractor, again nothing.
I saw the same problem in this site, but I don't know how he solwed this.
Please help me :crying:
Flash a Huawei recovery, a old one b584 or something, then download b596 DS or b597 SS i don't know your device, extract update.app and copy to sd card dload folder, try to flash it!
persona78 said:
Flash a Huawei recovery, a old one b584 or something, then download b596 DS or b597 SS i don't know your device, extract update.app and copy to sd card dload folder, try to flash it!
Click to expand...
Click to collapse
I flashed recovery and nothing happened, I can't get into recovery mode, only fastboot.
I have the same phone.
adamektv said:
I flashed recovery and nothing happened, I can't get into recovery mode, only fastboot.
I have the same phone.
Click to expand...
Click to collapse
You flashed the recovery and everything say okay, right?
Now flash a rom with dload and the 3 keys, do you know how?
.
persona78 said:
You flashed the recovery and everything say okay, right?
Now flash a rom with dload and the 3 keys, do you know how?
.
Click to expand...
Click to collapse
I don't know, when I pressed three buttons I didn't enter to recovery mode, but to rescue mode, as if recovery wasn't flashed.
adamektv said:
I don't know, when I pressed three buttons I didn't enter to recovery mode, but to rescue mode, as if recovery wasn't flashed.
Click to expand...
Click to collapse
Do you have a dload folder with update.app inside, in sd card?
With that and pressing vol +, vol - and power at same time you enter in flash mode and start to flash the rom
persona78 said:
Do you have a dload folder with update.app inside, in sd card?
With that and pressing vol +, vol - and power at same time you enter in flash mode and start to flash the rom
Click to expand...
Click to collapse
Yes, I have, and it's still not working
I can't charge battery, so i don't think it's software.
Maybe it's motherboard
adamektv said:
Yes, I have, and it's still not working
I can't charge battery, so i don't think it's software.
Maybe it's motherboard
Click to expand...
Click to collapse
How da start it???
adamektv said:
Yes, I have, and it's still not working
I can't charge battery, so i don't think it's software.
Maybe it's motherboard
Click to expand...
Click to collapse
Try opening the phone and disconnecting the battery .. do it if u only gave up with other methods someone said it worked
adamektv said:
Hi,
I have a problem. I tried to flash stock rom, but I forgot about hifi image.
There's a photo of my phone.
imgur.com/aVUBTRD
I have unlocked bootloader, but I can't flash hifi. "Command not allowed."
I tried method with put microsd card with update.app in dload into smartphone and I when I pressed power button
and VOLUME UP and VOLUME DOWN nothing happened.
I tried just flash all partitions separately, with huawei update extractor, again nothing.
I saw the same problem in this site, but I don't know how he solwed this.
Please help me :crying:
Click to expand...
Click to collapse
Hi Have got succeeded or not, if not follow the guide.
Is your phone being detected by PC if yes then you have chances of recovering your phone.
1. Download 15 Seconds ADB and Fastboot Drivers. Visit the official XDA forum for download and installation instructions.
2. Install Huawei HiSuite which will install drivers .
3. If HiSuite doesn't install Install drivers then install universal drivers for your device .
Now connect your device to pc and open HiSuite and click on system recovery it will show options for recovery if it is success then you are fine if not then proceed to this method.
Connect your phone to PC.
Open Command Prompt in the directory where you have extracted the ADB files by holding Shift and Right Mouse Button and finally click Open Command Prompt window here in the context menu.
Completely power off your device.
While holding Volume Down button, connect your device to PC via USB cable to boot to Fastboot Mode.
1. Type the following command in ADB :
Code:
adb devices
If your device is being detected and it shows list of devices attached and its serial number.
2.Now download the firmware of the phone before your phone got bootlooped extract the update using the file here
3.Now copy the following files ( boot.img, recovery.img and system.img ,cust.img ) from the extracted files to the ADB files directory.
4.Now Execute these commands one at a time using the command prompt.
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
5.Now Perform a Factory Reset if your phone got recovered.
If not then download the stock recovery of your Device and try steps 2,3,4.
Even if it doesn't get succeeded then try this option .
If your device got bootlooped while on Lollipop or Marshmallow then you have one more way to recover .
6.Now download the latest TWRP from here and boot into TWRP recovery if you cant enter TWRP recovery for this version then try the previous TWRP versions like 2.8.7 ,
7.Use the following command to flash the TWRP recovery
Code:
fastboot flash recovery twrp.img
8.Then download any of the custom ROMs or ask any of the XDA members for TWRP backup for your device and flash them through Recovery.
Then Reboot your Device.
You would most probably recover your device from any of the above methods . I too had the same problem and My device was use less for almost 6 months but after several trial and error methods my device got recovered.
Credits:
1.https://forum.xda-developers.com/honor-4c/how-to/huawei-honor-4c-index-troubleshooting-t3293110
2.https://forum.xda-developers.com/showthread.php?t=2433454
miststudent2011 said:
Hi Have got succeeded or not, if not follow the guide.
Is your phone being detected by PC if yes then you have chances of recovering your phone.
1. Download 15 Seconds ADB and Fastboot Drivers. Visit the official XDA forum for download and installation instructions.
2. Install Huawei HiSuite which will install drivers .
3. If HiSuite doesn't install Install drivers then install universal drivers for your device .
Now connect your device to pc and open HiSuite and click on system recovery it will show options for recovery if it is success then you are fine if not then proceed to this method.
Connect your phone to PC.
Open Command Prompt in the directory where you have extracted the ADB files by holding Shift and Right Mouse Button and finally click Open Command Prompt window here in the context menu.
Completely power off your device.
While holding Volume Down button, connect your device to PC via USB cable to boot to Fastboot Mode.
1. Type the following command in ADB :
Code:
adb devices
If your device is being detected and it shows list of devices attached and its serial number.
2.Now download the firmware of the phone before your phone got bootlooped extract the update using the file here
3.Now copy the following files ( boot.img, recovery.img and system.img ,cust.img ) from the extracted files to the ADB files directory.
4.Now Execute these commands one at a time using the command prompt.
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
5.Now Perform a Factory Reset if your phone got recovered.
If not then download the stock recovery of your Device and try steps 2,3,4.
Even if it doesn't get succeeded then try this option .
If your device got bootlooped while on Lollipop or Marshmallow then you have one more way to recover .
6.Now download the latest TWRP from here and boot into TWRP recovery if you cant enter TWRP recovery for this version then try the previous TWRP versions like 2.8.7 ,
7.Use the following command to flash the TWRP recovery
Code:
fastboot flash recovery twrp.img
8.Then download any of the custom ROMs or ask any of the XDA members for TWRP backup for your device and flash them through Recovery.
Then Reboot your Device.
You would most probably recover your device from any of the above methods . I too had the same problem and My device was use less for almost 6 months but after several trial and error methods my device got recovered.
Credits:
1.https://forum.xda-developers.com/honor-4c/how-to/huawei-honor-4c-index-troubleshooting-t3293110
2.https://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
I have already done this and still stuck in rescue
adamektv said:
I have already done this and still stuck in rescue
Click to expand...
Click to collapse
Did you try flashing different variant ROM ie different builds?
Actually I too got the same problem bootlooped on LP but cant flash the LP ROM back so I flashed different Region ROM.
Give a try to TWRP Method It should give you success.
Imp:
Try the previous ROM where you got Bootloop, or the version earlier to it.If it doesn't succeed try the rom which you got initially on your mobile.
PS: If your phone is being detected by your PC you have good chances of recovering your phone.
I have seen a lot of people using unofficial and third-party methods to root, which can result in a lot of adverse circumstances to say the least.
So I'm presenting a complete noob-friendly guide to rooting.
Prerequisites:
1. A computer ( I'm using Windows 10 but any OS would do)
2. A USB cable
3. Basic computer know-how
Part 1 (Getting computer ready)
Download sdk tools (adb and fastboot) from here
Note that in the entire guide I'm using official products.
So in Windows, download the zip and extract it in any folder.
Now download latest twrp recovery from here
The lastest version as of 7th August, 2017 is 3.1.
The downloaded file will be named as twrp-x.x.x-0-x3.img.
Now rename this as recovery.img (this will make our work easier)
Now move that file to platform-tools folder which we extracted earlier.
Also, I suggest downloading Intel USB drivers for Android from here
Part 2 (Getting Phone Ready)
Unlocking bootloader didn't format my phone but taking a backup is still important.
Now go to Settings<About Phone and click on Build until it says "You have become a developer"
Now back to main settings menu and find "Developer Options". And turn USB debugging on.
Download magisk install.zip, unistall.zip ans apk from here
Now connect your phone to PC via USB cable.
Step 3 (Rooting!!)
Now open platform-tools folder and press Shift+ right click.
Select "open command prompt here".
Now a terminal will open.
Type
Code:
adb devices
Now you will get a prompt on your phone. Accept it.
Now type
Code:
adb reboot bootloader
Your phone will automatically reboot and fastboot will come up.
Now type
Code:
fastboot oem unlock
[Alert! If you get <waiting for device> right click on start menu, select the unrecognized device and install Intel driver in it. Google for detailed instruction]
The process will start and you will get something like
(Okay ....)
(Okay....)
And type prompt. Now type
Code:
fastboot flash recovery recovery.img
Flashing will start.
When you get type prompt again, type
Code:
fastboot reboot
And when the screen switches off, hold power up+power button.
(
Code:
fastboot reboot emergency
should work but it's effect was same as
Code:
fastboot reboot
If you get something like red state... verification failed... Then it's a good news.
Wait a few seconds and then twrp will launch. I suggest swiping on the first screen
[because letv is almost dead and we can't expect any updates. Plus my bootloader was relocked in my first attempt when I didn't swipe.]
(I suggest wiping dalvik cache and cache)
Now you can just reboot your phone normally.
Now install magisk apk.
Now reboot again to recovery. (Easiest way is Update app>tree dots menu> reboot to recovery)
When twrp starts, go to install> download and find magisk zip. Swipe to install.
Reboot and you have a fully rooted phone!!
Will it work with Le1s eco x509
Will the given method work with le 1s eco x509
Yes it will!
Im stuck in <waiting for any device>. I've installed the Intel drivers , what do you mean by select unrecognized device and install the Intel driver in it?
deepu_ said:
Im stuck in <waiting for any device>. I've installed the Intel drivers , what do you mean by select unrecognized device and install the Intel driver in it?
Click to expand...
Click to collapse
Intel driver will not work try downloading drivers from skyneel for our phone
deepu_ said:
Im stuck in <waiting for any device>. I've installed the Intel drivers , what do you mean by select unrecognized device and install the Intel driver in it?
Click to expand...
Click to collapse
Intel drivers worked for my leeco le 1s. Ideally, Intel drivers should work for all devices.
I'll make a tutorial with screenshots on setting up the drivers whenever I get time.
i cant find "open command prompt here" with shift+ Right click in platform-tools folder
junaidshaik96 said:
i cant find "open command prompt here" with shift+ Right click in platform-tools folder
Click to expand...
Click to collapse
Make sure the directory is writable .
stealthinator16 said:
I have seen a lot of people using unofficial and third-party methods to root, which can result in a lot of adverse circumstances to say the least.
So I'm presenting a complete noob-friendly guide to rooting.
Prerequisites:
1. A computer ( I'm using Windows 10 but any OS would do)
2. A USB cable
3. Basic computer know-how
Part 1 (Getting computer ready)
Download sdk tools (adb and fastboot) from here
Note that in the entire guide I'm using official products.
So in Windows, download the zip and extract it in any folder.
Now download latest twrp recovery from here
The lastest version as of 7th August, 2017 is 3.1.
The downloaded file will be named as twrp-x.x.x-0-x3.img.
Now rename this as recovery.img (this will make our work easier)
Now move that file to platform-tools folder which we extracted earlier.
Also, I suggest downloading Intel USB drivers for Android from here
Part 2 (Getting Phone Ready)
Unlocking bootloader didn't format my phone but taking a backup is still important.
Now go to Settings<About Phone and click on Build until it says "You have become a developer"
Now back to main settings menu and find "Developer Options". And turn USB debugging on.
Download magisk install.zip, unistall.zip ans apk from here
Now connect your phone to PC via USB cable.
Step 3 (Rooting!!)
Now open platform-tools folder and press Shift+ right click.
Select "open command prompt here".
Now a terminal will open.
Type
Code:
adb devices
Now you will get a prompt on your phone. Accept it.
Now type
Code:
adb reboot bootloader
Your phone will automatically reboot and fastboot will come up.
Now type
Code:
fastboot oem unlock
[Alert! If you get <waiting for device> right click on start menu, select the unrecognized device and install Intel driver in it. Google for detailed instruction]
The process will start and you will get something like
(Okay ....)
(Okay....)
And type prompt. Now type
Code:
fastboot flash recovery recovery.img
Flashing will start.
When you get type prompt again, type
Code:
fastboot reboot
And when the screen switches off, hold power up+power button.
(
Code:
fastboot reboot emergency
should work but it's effect was same as
Code:
fastboot reboot
If you get something like red state... verification failed... Then it's a good news.
Wait a few seconds and then twrp will launch. I suggest swiping on the first screen
[because letv is almost dead and we can't expect any updates. Plus my bootloader was relocked in my first attempt when I didn't swipe.]
(I suggest wiping dalvik cache and cache)
Now you can just reboot your phone normally.
Now install magisk apk.
Now reboot again to recovery. (Easiest way is Update app>tree dots menu> reboot to recovery)
When twrp starts, go to install> download and find magisk zip. Swipe to install.
Reboot and you have a fully rooted phone!!
Click to expand...
Click to collapse
It works perfectly on x507, thanks bro
Orange State
stealthinator16 said:
I have seen a lot of people using unofficial and third-party methods to root, which can result in a lot of adverse circumstances to say the least.
So I'm presenting a complete noob-friendly guide to rooting.
Prerequisites:
1. A computer ( I'm using Windows 10 but any OS would do)
2. A USB cable
3. Basic computer know-how
Part 1 (Getting computer ready)
Download sdk tools (adb and fastboot) from here
Note that in the entire guide I'm using official products.
So in Windows, download the zip and extract it in any folder.
Now download latest twrp recovery from here
The lastest version as of 7th August, 2017 is 3.1.
The downloaded file will be named as twrp-x.x.x-0-x3.img.
Now rename this as recovery.img (this will make our work easier)
Now move that file to platform-tools folder which we extracted earlier.
Also, I suggest downloading Intel USB drivers for Android from here
Part 2 (Getting Phone Ready)
Unlocking bootloader didn't format my phone but taking a backup is still important.
Now go to Settings<About Phone and click on Build until it says "You have become a developer"
Now back to main settings menu and find "Developer Options". And turn USB debugging on.
Download magisk install.zip, unistall.zip ans apk from here
Now connect your phone to PC via USB cable.
Step 3 (Rooting!!)
Now open platform-tools folder and press Shift+ right click.
Select "open command prompt here".
Now a terminal will open.
Type
Code:
adb devices
Now you will get a prompt on your phone. Accept it.
Now type
Code:
adb reboot bootloader
Your phone will automatically reboot and fastboot will come up.
Now type
Code:
fastboot oem unlock
[Alert! If you get <waiting for device> right click on start menu, select the unrecognized device and install Intel driver in it. Google for detailed instruction]
The process will start and you will get something like
(Okay ....)
(Okay....)
And type prompt. Now type
Code:
fastboot flash recovery recovery.img
Flashing will start.
When you get type prompt again, type
Code:
fastboot reboot
And when the screen switches off, hold power up+power button.
(
Code:
fastboot reboot emergency
should work but it's effect was same as
Code:
fastboot reboot
If you get something like red state... verification failed... Then it's a good news.
Wait a few seconds and then twrp will launch. I suggest swiping on the first screen
[because letv is almost dead and we can't expect any updates. Plus my bootloader was relocked in my first attempt when I didn't swipe.]
(I suggest wiping dalvik cache and cache)
Now you can just reboot your phone normally.
Now install magisk apk.
Now reboot again to recovery. (Easiest way is Update app>tree dots menu> reboot to recovery)
When twrp starts, go to install> download and find magisk zip. Swipe to install.
Reboot and you have a fully rooted phone!!
Click to expand...
Click to collapse
There was a prompt for TWRP update and Magisk Update.
After it has started showing Orange State instead of Red State.
The phone got rebooted and all installed apps were deleted.
Xposed got uninstalled.
Playstore, Googlemaps got unistalled.
Camera is working.
Calling is working.
Now it shows Orange State.
Is it safe.
Can we bring it to red state?
As per this link
https://www.androidauthority.com/verified-boot-warnings-in-android-6-0-marshmallow-650368/
Orange warning: Your device is in an “unlocked” state. This means that your operating system can’t be checked to make sure that it’s safe to use.
Red warning: The operating system on your device has been changed or corrupted and is not safe to use. The device may not work properly and could expose your data to corruption and security risks.
Orange State seems to be a better state than red.
eighty9sid said:
There was a prompt for TWRP update and Magisk Update.
After it has started showing Orange State instead of Red State.
The phone got rebooted and all installed apps were deleted.
Xposed got uninstalled.
Playstore, Googlemaps got unistalled.
Camera is working.
Calling is working.
Now it shows Orange State.
Is it safe.
Can we bring it to red state?
As per this link
https://www.androidauthority.com/verified-boot-warnings-in-android-6-0-marshmallow-650368/
Orange warning: Your device is in an “unlocked” state. This means that your operating system can’t be checked to make sure that it’s safe to use.
Red warning: The operating system on your device has been changed or corrupted and is not safe to use. The device may not work properly and could expose your data to corruption and security risks.
Orange State seems to be a better state than red.
Click to expand...
Click to collapse
I too got orange state when I had to reroot my device after it got bricked, but there was no issue, everything worked perfectly.
Hi l used this very step by step guides but sadly l got stuck at the :-
Alert! If you get <waiting for device> right click on start menu, select the unrecognized device and install Intel driver in it. Google for detailed instruction]
The process will start and you will get something like
(Okay ....)
(Okay....)
Here l select the unrecognized device and install the Intel drivers but it stuck at the "Okay,,,,Okay" prompt. Meaning that l didn't get this okay prompts and it keeps me on waiting the whole day.
Secondly, till this command l stop it and power down the phone, so after l power back on and try opening the "Application" folder, then it's not working anymore, it shuts down itself.
Please help!!
Valambok said:
Hi l used this very step by step guides but sadly l got stuck at the :-
Alert! If you get <waiting for device> right click on start menu, select the unrecognized device and install Intel driver in it. Google for detailed instruction]
The process will start and you will get something like
(Okay ....)
(Okay....)
Here l select the unrecognized device and install the Intel drivers but it stuck at the "Okay,,,,Okay" prompt. Meaning that l didn't get this okay prompts and it keeps me on waiting the whole day.
Secondly, till this command l stop it and power down the phone, so after l power back on and try opening the "Application" folder, then it's not working anymore, it shuts down itself.
Please help!!
Click to expand...
Click to collapse
Don't power off your phone. Post a screenshot of what exact problem you face with driver installation.
Phone Dead
Hi, after completing this step by step guides my Le 1s can't boot to normal anymore, even if I try booting up system from twrp also it doesn't help, I cant even power off now. So, please please help me out again on how to get back to a normal phone. Thanks in advance.
N.B: My phone shows Orange state
Hello guys, help get the root on the phone Sharp Aquos P1.
I got the modified apk for the gcam: goo.gl/fdikTs
http://4pda.ru/forum/index.php?showtopic=882709&st=1800#entry69805276
SugoiDesu said:
Hello guys, help get the root on the phone Sharp Aquos P1.
Click to expand...
Click to collapse
do like i say carefuly excaus me for my poor english i have same device aquos p1 shv34
1-get (twarp recovery) and (Magisk-v16.4)(SuperSU-v2.82-201705271822) from google research and adb drive usb 1.4.3
2-setup usb right in ur pc
3-us adb to root and install recovery img i will say to u how
open cmd in same folder adb in c: drive and use this code like i wright now
adb devices
adb usb
adb get-state
adb remout
adb reboot sideload
ur mobile will open sideload in ur mobile u can now use this cod to install supersu and magisk for rooting ur mobile and twrp recover too do this god ( adb sideload Magisk-v16.4.zip)and( adb sideload SuperSU-v2.82-201705271822.4.zip) now ur fone it complatlly rooting if u have ur device is close its okay let ur devices in sideload mode 10 minut it will go to recovery after time out now u use updat adb and do this cod
1-fastboot oem unloke-go
2- fastboot flashing unlock
3-fastboot flash recovery recovery.img
now u have u have twrp recovery u can go to custom recovery when press vol+vol-power button and install zip and install Magisk-v16.4.zip and SuperSU.zip halloolwia u now have device rooting and have twrp recovery
all this after 2 month searching about how i rooting and install recovery and flash rom to sharp aquos p1 shv34
remmber adb folder in c: partition u must put there rom u want flash ir and magisk and recvoery img and supersu and hapy life with awesome phone byyyyeeeeeee:good::good::good::good:
alswafy22 said:
do like i say carefuly excaus me for my poor english i have same device aquos p1 shv34
1-get (twarp recovery) and (Magisk-v16.4)(SuperSU-v2.82-201705271822) from google research and adb drive usb 1.4.3
2-setup usb right in ur pc
3-us adb to root and install recovery img i will say to u how
open cmd in same folder adb in c: drive and use this code like i wright now
adb devices
adb usb
adb get-state
adb remout
adb reboot sideload
ur mobile will open sideload in ur mobile u can now use this cod to install supersu and magisk for rooting ur mobile and twrp recover too do this god ( adb sideload Magisk-v16.4.zip)and( adb sideload SuperSU-v2.82-201705271822.4.zip) now ur fone it complatlly rooting if u have ur device is close its okay let ur devices in sideload mode 10 minut it will go to recovery after time out now u use updat adb and do this cod
1-fastboot oem unloke-go
2- fastboot flashing unlock
3-fastboot flash recovery recovery.img
now u have u have twrp recovery u can go to custom recovery when press vol+vol-power button and install zip and install Magisk-v16.4.zip and SuperSU.zip halloolwia u now have device rooting and have twrp recovery
all this after 2 month searching about how i rooting and install recovery and flash rom to sharp aquos p1 shv34
remmber adb folder in c: partition u must put there rom u want flash ir and magisk and recvoery img and supersu and hapy life with awesome phone byyyyeeeeeee:good::good::good::good:
Click to expand...
Click to collapse
After install adb driver how to get to bootloader mode ? I have try type "adb reboot bootloader" but this will reboot to system , also try "adb reboot-bootloader" but still goin reboot to system , cab you help me ?
sleepingelf said:
After install adb driver how to get to bootloader mode ? I have try type "adb reboot bootloader" but this will reboot to system , also try "adb reboot-bootloader" but still goin reboot to system , cab you help me ?
Click to expand...
Click to collapse
To enter fastboot mode:
1. Turn off the phone.
2. Press volume down + power button+ plug in usb cable in the same time.
After that you will enter fastboot mode.
Root
SugoiDesu said:
Hello guys, help get the root on the phone Sharp Aquos P1.
Click to expand...
Click to collapse
I have already rooted my Sharp p1 so here steps for getting root(Magisk root only):
It is needed to unlock bootloader first:
1. Go to the Settings -> About phone, scroll down and tap on the Build number several times until you get message that you are a developer.
2. After that go to the Settings -> Developer options. Enable OEM unlocking and USB debugging.
3. Download adb drivers: k-tai.sharp.co.jp/support/developers/driver/index.html
4. Install them, don't forget to disable driver signature verification on your computer.
5. Download ADB zip archive and extract it in C:\adb.
dl.google.com/android/repository/platform-tools-latest-windows.zip
6. Open the Command Prompt as Administrator. Go to the adb folder with command: cd C:\adb
3. Enter your phone into fastboot mode: turn phone off, than press volume down and power button and connect USB in the same time.
4. Than enter this commands in command prompt:
fastboot oem unlock-go
fastboot erase userdata
After that it's possible to flash patched boot.img:
1. Download patched boot(for build number 00TW_1_190): yadi.sk/d/L7blgSOi3Rxpab
2. Place patched_boot.img file into C:\adb folder
3. Flash it with comand in fastboot:
fastboot flash boot patched_boot.img
4. Download and install magisk manager on your phone
5. Install zip archive of magisk from manager
This is all. Good luck!
PS: All the user data will be erased after this. Also phone have to be updated to the last firmware. If someone don't want to update the phone (some people got broken wifi and bluetooth after update), he or she must use boot.img from their firmware and patch it in Magisk manager. Correct boot.img can be extracted from update file of their firmware: 4pda.ru/forum/index.php?showtopic=882709&st=2740#entry70267350
Being root, do you know if it's possible to install another firmware image on the Aquos P1, like the one of the SHV34 (which is Android 8)? I believe both phones have the exact same hardware...
The trouble is, the SHV34 Android 8 update is OTA and there's no firmware file available for download.
grenet_ghost said:
Being root, do you know if it's possible to install another firmware image on the Aquos P1, like the one of the SHV34 (which is Android 8)? I believe both phones have the exact same hardware...
The trouble is, the SHV34 Android 8 update is OTA and there's no firmware file available for download.
Click to expand...
Click to collapse
No, I don't know. There are update files of Android 7 and 8 for shv34 on 4pda.ru forum, but it isn't full update. Only system, boot and vendor images are full, all other are patches. I think we need help of Android developer to create firmware from shv34 update, if it possible.
Few months ago one developer started making Lineage OS 14 for our phone, but developing stuck because there wasn't someone to test all new stuff and make logcats, like test new kernel. Also guys from 4pda started donating for the phone to send it to developer, but didn't donate full price by this time.
alswafy22 said:
do like i say carefuly excaus me for my poor english i have same device aquos p1 shv34
1-get (twarp recovery) and (Magisk-v16.4)(SuperSU-v2.82-201705271822) from google research and adb drive usb 1.4.3
2-setup usb right in ur pc
3-us adb to root and install recovery img i will say to u how
open cmd in same folder adb in c: drive and use this code like i wright now
adb devices
adb usb
adb get-state
adb remout
adb reboot sideload
ur mobile will open sideload in ur mobile u can now use this cod to install supersu and magisk for rooting ur mobile and twrp recover too do this god ( adb sideload Magisk-v16.4.zip)and( adb sideload SuperSU-v2.82-201705271822.4.zip) now ur fone it complatlly rooting if u have ur device is close its okay let ur devices in sideload mode 10 minut it will go to recovery after time out now u use updat adb and do this cod
1-fastboot oem unloke-go
2- fastboot flashing unlock
3-fastboot flash recovery recovery.img
now u have u have twrp recovery u can go to custom recovery when press vol+vol-power button and install zip and install Magisk-v16.4.zip and SuperSU.zip halloolwia u now have device rooting and have twrp recovery
all this after 2 month searching about how i rooting and install recovery and flash rom to sharp aquos p1 shv34
remmber adb folder in c: partition u must put there rom u want flash ir and magisk and recvoery img and supersu and hapy life with awesome phone byyyyeeeeeee:good::good::good::good:
Click to expand...
Click to collapse
is it your phone sharp aquos shv34 au version?
are you use os 7.0 or 8.0?
i had shv34 os 7.0 i'll try it if ur phone same as mine. :good:
---------- Post added at 07:52 PM ---------- Previous post was at 07:47 PM ----------
Rumin133 said:
I have already rooted my Sharp p1 so here steps for getting root(Magisk root only):
It is needed to unlock bootloader first:
1. Go to the Settings -> About phone, scroll down and tap on the Build number several times until you get message that you are a developer.
2. After that go to the Settings -> Developer options. Enable OEM unlocking and USB debugging.
3. Download adb drivers: k-tai.sharp.co.jp/support/developers/driver/index.html
4. Install them, don't forget to disable driver signature verification on your computer.
5. Download ADB zip archive and extract it in C:\adb.
dl.google.com/android/repository/platform-tools-latest-windows.zip
6. Open the Command Prompt as Administrator. Go to the adb folder with command: cd C:\adb
3. Enter your phone into fastboot mode: turn phone off, than press volume down and power button and connect USB in the same time.
4. Than enter this commands in command prompt:
fastboot oem unlock-go
fastboot erase userdata
After that it's possible to flash patched boot.img:
1. Download patched boot(for build number 00TW_1_190): yadi.sk/d/L7blgSOi3Rxpab
2. Place patched_boot.img file into C:\adb folder
3. Flash it with comand in fastboot:
fastboot flash boot patched_boot.img
4. Download and install magisk manager on your phone
5. Install zip archive of magisk from manager
This is all. Good luck!
PS: All the user data will be erased after this. Also phone have to be updated to the last firmware. If someone don't want to update the phone (some people got broken wifi and bluetooth after update), he or she must use boot.img from their firmware and patch it in Magisk manager. Correct boot.img can be extracted from update file of their firmware: 4pda.ru/forum/index.php?showtopic=882709&st=2740#entry70267350
Click to expand...
Click to collapse
is it possible to apply it on my sharp SHV34 AU version?
is it patched boot will work on my device?
help me please..
I have sh-04h with android 7.0
I can not into fastboot mode with anyway
i tri:
-adb: adb reboot rootloader
-key: vol - and power and usb conection with computer
-key: vol - and vol + and power
-With key: vol - and power , have recovery mode with 02 option:
+ reboot
+wipe data user (format factory)
Does anyone here help me?
I want to add supper su to system or install twrp
SHV34 of AU japan
alswafy22 said:
do like i say carefuly excaus me for my poor english i have same device aquos p1 shv34
1-get (twarp recovery) and (Magisk-v16.4)(SuperSU-v2.82-201705271822) from google research and adb drive usb 1.4.3
2-setup usb right in ur pc
3-us adb to root and install recovery img i will say to u how
open cmd in same folder adb in c: drive and use this code like i wright now
adb devices
adb usb
adb get-state
adb remout
adb reboot sideload
ur mobile will open sideload in ur mobile u can now use this cod to install supersu and magisk for rooting ur mobile and twrp recover too do this god ( adb sideload Magisk-v16.4.zip)and( adb sideload SuperSU-v2.82-201705271822.4.zip) now ur fone it complatlly rooting if u have ur device is close its okay let ur devices in sideload mode 10 minut it will go to recovery after time out now u use updat adb and do this cod
1-fastboot oem unloke-go
2- fastboot flashing unlock
3-fastboot flash recovery recovery.img
now u have u have twrp recovery u can go to custom recovery when press vol+vol-power button and install zip and install Magisk-v16.4.zip and SuperSU.zip halloolwia u now have device rooting and have twrp recovery
all this after 2 month searching about how i rooting and install recovery and flash rom to sharp aquos p1 shv34
remmber adb folder in c: partition u must put there rom u want flash ir and magisk and recvoery img and supersu and hapy life with awesome phone byyyyeeeeeee:good::good::good::good:
Click to expand...
Click to collapse
Can SHV34 of AU (japan) into fast boot?
Android 8.0 oreo
Thankyou very much
mangbrem said:
is it possible to apply it on my sharp SHV34 AU version?
is it patched boot will work on my device?
help me please..
Click to expand...
Click to collapse
As I know, it is not possible to access fastboot on shv34, so the only way is to do something like this https://blog.tewi.love/?p=135
The same is for sh-04h and 506sh. Only sharp p1 has fastboot
I have softbank sharp aquos 506sh.
My build mumber is s1008, nougjat 7.0.
I want to update to oreo.
After net search, i installed japan vpn.
But when i try to update, it gives error that " this service is unavailable because can not read sim card".
I tried both ways inserting sim card. And removing it, but still get the same response.
Kindly guide when how i can update it.
Sim works fine in mobile.
I have trief factory resetting 2 3 times from inside settimg menu, as it do not boot in recovery,
Kimdly help me, because fighting with it ftom last 2 days to get updated
hahmad78 said:
I have softbank sharp aquos 506sh.
My build mumber is s1008, nougjat 7.0.
I want to update to oreo.
After net search, i installed japan vpn.
But when i try to update, it gives error that " this service is unavailable because can not read sim card".
I tried both ways inserting sim card. And removing it, but still get the same response.
Kindly guide when how i can update it.
Sim works fine in mobile.
I have trief factory resetting 2 3 times from inside settimg menu, as it do not boot in recovery,
Kimdly help me, because fighting with it ftom last 2 days to get updated
Click to expand...
Click to collapse
I also have 506SH, and im stuck on Marshmallow. Same USIM Error, the VPN trick dont work with this model!! and it dont have fast boot or recovery as far as i know. Is it possible you can dump a clean backup of ur OS 7. I just want to update my OS, not looking for root etc!!
dear if you can tell me the procedure, iwould definitely do it.
if even make a dump, how you would flash it without fastboot, root, recovery,
i am seraching from last week, but could not find any clues
---------- Post added at 10:46 AM ---------- Previous post was at 10:40 AM ----------
https://www.teamandroid.com/2017/09/18/capture-android-ota-update-url/
I have found this method online "Using FlashFire App (Root users)" But it require a rooted set! and I believe to apply this dump the target set must be rooted too! I think 506SH has no root either!!
https://www.the***********.com/backup-android-device-guide/
I dont know why no1 ever backup the download OTA of the firmware and posted it anywhere!!
I will try this logcat method! and will report back!! i dont think it will work! I think there is some sort of SIM issue! because I notice in my phone! the baseband has no version! just 00 00 00!!
qaisarrehman said:
I have found this method online "Using FlashFire App (Root users)" But it require a rooted set! and I believe to apply this dump the target set must be rooted too! I think 506SH has no root either!!
https://www.the***********.com/backup-android-device-guide/
I dont know why no1 ever backup the download OTA of the firmware and posted it anywhere!!
I will try this logcat method! and will report back!! i dont think it will work! I think there is some sort of SIM issue! because I notice in my phone! the baseband has no version! just 00 00 00!!
Click to expand...
Click to collapse
baseband 00 00 00 is beacuse you are still on marshmallow 6.0 , which was out of factory version, i am on noughat 7.0, my baseband is 1.00 00 00, and if i ever get oreo, it will be 200 00 00, every company has its nown symbols and styles
logcat method can work if ota update essage apperas, but unfortunately, we dont have that option still.
lets search on local olx for 506sh users, maybe some one has upgraded oreo or some methods . maybe whole sellers in karachi bringing sharp phones, have some clues,
When I reset My phone and setup first time! I get the Automatic update pop up!! I will try to logcat at this stage to see if it shows any URL!! in Karachi phone shop have no clue, they even dont know this phone has a 120Hz screen! the shop I bought my phone from was telling me if I found a working root method! he can give me the contract to root these sets!
qaisarrehman said:
When I reset My phone and setup first time! I get the Automatic update pop up!! I will try to logcat at this stage to see if it shows any URL!! in Karachi phone shop have no clue, they even dont know this phone has a 120Hz screen! the shop I bought my phone from was telling me if I found a working root method! he can give me the contract to root these sets!
Click to expand...
Click to collapse
that automatic update message which appears is just due to reset.
thing which i understand is that update process is not accepting wifi, and goes for sim data.
because in SOFTBANK website, they stated, either wifi or sim data required