My Lumia 630 keep saying "ERROR: Unable to find a bootable option. Press any key to shut down". WDRT doesn't help, it says installation successful but after NOKIA screen the phone shows this error again. This happened after I installed Reset Protection cab file with iutool, but it has installed successfully, then I restarted the phone and it showed BitLocker recovery error saying that the key is missing from the TPM. Then I used WDRT and it flashed and after restart this error appeared What can I do now to make my phone live?
Related
I solved it, somehow got back into the bios.
Thread can be removed...
I was recently given a phone that a friend had fooled around with. It has TWRP installed on it but when you try to reboot back to the system, or even just go to the power off option in the reboot menu it says "Your phone does not appear to be rooted" and asks if I want to install SuperSU. Whether I pick do not install or swipe to install it just reboots right back to the main TWRP menu. I have tried a couple of root programs which have told me that they successfully rooted the phone, yet after it still gives me the same "Your phone does not appear to be rooted" message. Also when i plug the phone into the computer it makes a connection noise but does not show up on windows explorer yet the root programs were able to recognize it. Any suggestions?
Upgrade your TWRP to last version 2.8.7.3. http://blastagator.ddns.net/twrp.html
Hello I got this device (MS345) last week and today I was going to unlock bootloader, everything was going ok, i put the MS34510f_00 kdz and it got me an error (couldn't connect to server i think it was) but when I tried to reboot the phone it just gave me this lines that says "Secure booting error! Error Code: 1003" I can't get my phone booted normally or going to download mode or try recovery, when i try to do a factory reset I select the yes option but then it gives me the same security error, what can I do? please help me
It happened to me the same thing I had to use the warranty I did not find any solution
trixi3 said:
Hello I got this device (MS345) last week and today I was going to unlock bootloader, everything was going ok, i put the MS34510f_00 kdz and it got me an error (couldn't connect to server i think it was) but when I tried to reboot the phone it just gave me this lines that says "Secure booting error! Error Code: 1003" I can't get my phone booted normally or going to download mode or try recovery, when i try to do a factory reset I select the yes option but then it gives me the same security error, what can I do? please help me
Click to expand...
Click to collapse
When this occured with me i just reinstalled de stock rom with lg flash tool and this put me automatically into download mode when i connected my phone in pc
Need Help! GF gave me her 1+6T, carrier locked to T-mobile. I have AT&T, so I attempted to unlock the device using this link :
https://www.google.com/amp/s/www.xd...nternational-without-unlocked-bootloader/amp/
I read, followed, re-read the instructions. I kept getting the error 'Sahara communication failed'. I tried all 3 USB ports and made sure i had the correct drivers installed. The phone shows up and connects in the tool, then it gives me the error after starting the patch. Next i unplugged the phone and found it to be bricked. it wont turn on. I tried holding down the power button for 20 seconds, used button combinations, nothing. Yet it still shows up on my computer when plugged in using volume +/-
I tried using this method to unbrick:
https://www.xda-developers.com/unbrick-oneplus-6t-t-mobile-international/
Still bricked, and still gives me the same error.
What can i do? Please assist, my girlfriend is going to be pissed if i can't get this working lol. I need to get the phone working again + unlock to get my at&t sim card working on it. Thanks in advance!
EDIT: I got the phone on!!! Now I just need getting the phone unlocked. Still getting the 'Sahara communication failed' error
**EDIT 2 : EVERYTHING IS SOLVED AND WORKING NOW YOU CAN DELETE THIS
Mine gives the usb device malfunctioned error. I have installed the qualcomm usb drivers. The MSM tool wont recognize it, and my phone wont boot in any other mode except EDL. It will not boot to bootloader or anything. Funny thing is, all I was trying to do was convert the T-Mobile version to international which I've done before. During that process, it hung at "recording downloading time". I let it go for 20 minutes, according to the guide it is supposed to take 5. I canceled the process, (I had done this one other time before, and it booted just fine) and now nothing works. Please help.
I think I have an unsolved problem. I know it doesn't exist, but it's very hard to find it.
I know it's not the Plus, but the Model is the Moto C XT1754 (NAMATH) Android 7.0 Nogaut - NRD90M.060
And there is no specific topic for it, but they are very similar and I thought I could post it here.
It's a very complicated problem, so I'll explain in detail what happened and why I had to come here to solve it.
(translated)
- STARTING:
I installed a TWRP through the app, without unlocking the Bootloader.
Whenever I turned it on, at boot still, the message appeared:
'red state
Your device has failed verification and may not work properly
Your device will boot in 5 seconds'
But it called normally.
I installed 'Magisk Manager 24.2' by zip and app afterwards.
I activated 'Zygisk' and in DenyList I activated/hidden from Google Play Services completely. All.
I restarted the smartphone and Sitema started having numerous errors. Most of the apps that I opened, closed with error, and other apps in the background too, mainly Google Play Services.
I tried to solve this but I couldn't because the smartphone was unusable.
I decided to format by TWRP.
But when I tried to restart the device, I always entered TWRP and continued that message in Boot ('Red State Your Device...')
I decided to reinstall Stockrom from Moto C XT1754.
When I tried to install Stockrom through flash_tool, I couldn't.
It always gives error.
'BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (0x7D5)
[BROM] Can not pass bootrom start command! Possibly target power up too early.
[HINT}:'
or this one is the most common:
'BROM ERROR : ?? (0x1)
[HINT];'
I even tried installing a Custom Rom via Sdcard , 'Viper-namath-20171206-Coral-v3.1.1-UNOFFICIAL' with the GAPPs, etc.
I can install the ROM. (but the GAPPS gives an error at the end of the installation) 'open_gapps-arm64-7.1-micro-20220215'
But I think this case is because it is not installing the Custom ROM correctly. (Because of the Locked Bootloader? Maybe... I'm kind of a layman on the subject)
Because when I restart the device after installation it goes back to TWRP.
I can't get into Fastboot mode with the command by the buttons on the device, only by TWRP when I access 'Reboot>Bootloader'.
Reboot and go to fastboot (Black screen, down there written '=> FASTBOOT mode...'
I've already tried to recover/rescue the device by Motorola/Lenovo's 'Rescue and Smart Assistant'. But when I try to rescue it (with it connected to TWRP) it asks to accept the message to enable USB debugging.
But I don't have access to this window through TWRP.
Here comes the big question, why I am not able to solve my problem:
I think my 'USB Debugging' was off/disabled before I erased everything (formatted).
I'll try Stockrom's Flash through TWRP to see if it solves the problem, but I don't think it will.
I think the problem may be with the 'USB Cable' as well. He's old. I tested with a non-original USB cable that I had to see and I can't either, the errors persisted.
I plan on getting another original to test as well.
Just an observation.
My device is being recognized as 'USB MTP Device' (under 'Portable Devices')
If anyone can save me, I'd really appreciate it!
Thanks in advance for all the help! Every opinion matters!
And when I give the command 'ADB Devices' my device appears 'unauthorized'
'ZW3223CGWK unauthorized'