Related
Hi guys, i updated my VNS-L31 into nougat test-key, i wanted to downgrade to stock MM because there's a lot of bugs, when i'm trying to install img file from fastboot, it always failed and i saw in my phone "Phone LOCKED" it was previously unlocked. Can anyone help my unlocking my device with
L31-900B300 build number? thanks!
kevshots said:
Hi guys, i updated my VNS-L31 into nougat test-key, i wanted to downgrade to stock MM because there's a lot of bugs, when i'm trying to install img file from fastboot, it always failed and i saw in my phone "Phone LOCKED" it was previously unlocked. Can anyone help my unlocking my device with
L31-900B300 build number? thanks!
Click to expand...
Click to collapse
Use the same unlock code you've used before, get it again.
And why are you using that build B300, you could have at leasT tried B336, which in my opinion isn't having any problems noticeable, battery drain also good...people complain about this, but if you know what you're doing this will never be an issue.
_New World Order (NWO)_
Thanks for the response, I'll try tomorrow, i've already forgotten and deleted the code. Actually, it's all misunderstanding on why i flashed this build lol. I am planning to revert to MM stock and i'm still looking for some guide on how to. I tried other methods and didn't get luck. If you have any ideas would you mind helping me again? Thanks!
kevshots said:
Thanks for the response, I'll try tomorrow, i've already forgotten and deleted the code. Actually, it's all misunderstanding on why i flashed this build lol. I am planning to revert to MM stock and i'm still looking for some guide on how to. I tried other methods and didn't get luck. If you have any ideas would you mind helping me again? Thanks!
Click to expand...
Click to collapse
Follow this https://forum.xda-developers.com/showthread.php?p=71203214 and you should find what you need, if still confused, just sent a PM or post here.
_New World Order (NWO)_
[email protected] said:
Follow this https://forum.xda-developers.com/showthread.php?p=71203214 and you should find what you need, if still confused, just sent a PM or post here.
_New World Order (NWO)_
Click to expand...
Click to collapse
Yeah I've already seen this and i'm not sure on what to download, i tried once but it says
"software install failed!"
"Incompatibility with the current version.
Please download the correct update package."
and i can't still unlock my bootloader, the website is new, and it won't redirect me to unlocking SITE from this thread LINK.
also just wondering, in this method, is it require to unlock the bootloader ? thank you so much for helping me.
kevshots said:
Yeah I've already seen this and i'm not sure on what to download, i tried once but it says
"software install failed!"
"Incompatibility with the current version.
Please download the correct update package."
and i can't still unlock my bootloader, the website is new, and it won't redirect me to unlocking SITE from this thread LINK.
also just wondering, in this method, is it require to unlock the bootloader ? thank you so much for helping me.
Click to expand...
Click to collapse
This method don't require unlocked bootloader, don't require TWRP.
Just get the rollback file and full MM update file.
Install rollback first then MM file after, put the extracted update.app files In the dload folder on root of sdcard, one by one after each install
Or
If you don't want to use rollback file, unlock bootloader, then flash patched oeminfo file via:
1.fastboot using this command: fastboot flash oeminfo xxx (xxx= name of oemifo zip you have, ie. fastboot flash oeminfo C432oeminfoDual.zip)
Or
2.while In fastboot flash revolution nougat recovery, then boot into it by "vol up + power" then flash the patched oeminfo,
Then once flashed OEMINFO then install via 3 buttons mode the update.app of your firmware, this must be in dload folder on sdcard as above.if asked for password then use "reset"
_New World Order (NWO)_
[email protected] said:
Follow this https://forum.xda-developers.com/showthread.php?p=71203214 and you should find what you need, if still confused, just sent a PM or post here.
_New World Order (NWO)_
Click to expand...
Click to collapse
[email protected] said:
This method don't require unlocked bootloader, don't require TWRP.
Just get the rollback file and full MM update file.
Install rollback first then MM file after, put the extracted update.app files In the dload folder on root of sdcard, one by one after each install
Or
If you don't want to use rollback file, unlock bootloader, then flash patched oeminfo file via:
1.fastboot using this command: fastboot flash oeminfo xxx (xxx= name of oemifo zip you have, ie. fastboot flash oeminfo C432oeminfoDual.zip)
Or
2.while In fastboot flash revolution nougat recovery, then boot into it by "vol up + power" then flash the patched oeminfo,
Then once flashed OEMINFO then install via 3 buttons mode the update.app of your firmware, this must be in dload folder on sdcard as above.if asked for password then use "reset"
_New World Order (NWO)_
Click to expand...
Click to collapse
I was able to revert to MM using this HUAWEI P9 Lite Firmware i don't know how, but it worked today. LOL, lastly, i just have a question to revolutionaryTWRP, i tried it once when i was having problem with ROM, and it couldn't even mount internal storage, but for other people i saw here in xda, they can even flash zip files from it. just wondering if there are other Revolutionary TWRP versions or it's all about the tutorial on using RevolutionaryTWRP? anyways, thank you so much again. and how can i tag this thread as solved by the way?
kevshots said:
I was able to revert to MM using this HUAWEI P9 Lite Firmware i don't know how, but it worked today. LOL, lastly, i just have a question to revolutionaryTWRP, i tried it once when i was having problem with ROM, and it couldn't even mount internal storage, but for other people i saw here in xda, they can even flash zip files from it. just wondering if there are other Revolutionary TWRP versions or it's all about the tutorial on using RevolutionaryTWRP? anyways, thank you so much again. and how can i tag this thread as solved by the way?
Click to expand...
Click to collapse
Edit title to solved.
The current TWRP by Revolution for nougat can't mount /data partition, and if you need flash anything there, you've got to change filesystem as advised In the tutorials, but you can flash mods or apps to system partition without problems....this problem is In nougat TWRP only currently, MM TWRP has no issues at all...anyways good to hear your sorted!
_New World Order (NWO)_
[email protected] said:
Edit title to solved.
The current TWRP by Revolution for nougat can't mount /data partition, and if you need flash anything there, you've got to change filesystem as advised In the tutorials, but you can flash mods or apps to system partition without problems....this problem is In nougat TWRP only currently, MM TWRP has no issues at all...anyways good to hear your sorted!
_New World Order (NWO)_
Click to expand...
Click to collapse
okay, Thank you so much danerrickcuba for helping me out. :good: :highfive:
HI
can anyone help me to rollback my nxt-al10 to emui 6 please
drlsd said:
HI
can anyone help me to rollback my nxt-al10 to emui 6 please
Click to expand...
Click to collapse
Emui 6 ?? or maybe you want to say emui 4 and android 6 ??
Yes ,thank you very much ,i mean emiu 4.1 please
drlsd said:
Yes ,thank you very much ,i mean emiu 4.1 please
Click to expand...
Click to collapse
unlock & flash TWRP recovery & flash another firmware using TWRP
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.
bodzio3333 said:
I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.
Click to expand...
Click to collapse
If you're on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk
amin318 said:
If you're on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help
bodzio3333 said:
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help
Click to expand...
Click to collapse
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk
amin318 said:
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.
bodzio3333 said:
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.
Click to expand...
Click to collapse
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:
I created a al10 roll back for all al10 phones. It converts it to a DL0017 dual active sim. Message me for details how to obtain it from me .. MUST have twrp installed .
Samavb said:
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:
Click to expand...
Click to collapse
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....
Unlock bootloader ADB commands + Stock + Debrand
bodzio3333 said:
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....
Click to expand...
Click to collapse
If you want to unlock bootloader through ADB?
Here are the steps.
In your phone go to settings - >developer options - > put usb debubbing ON
switch off the phone.
Press and hold the down button for 3 seconds & then connect it to the computer
It will then go to fastboot mode.
then open SRK tools
type 000 to enter the command prompt.
Type the following command
fastboot oem unlock xxxxxxxxxxxxx
In this command xxxxxxxx is your bootloader code. just replace xxxxxxx with your code and press enter.
This will unlock your bootloader & will do a factory reset.
In SRK tools there is an option for bootloader unlock but I think that is only if you are in EMUI 4.0 or EMUI 4.1 that is what I think may be anyone else who tried this option in android 7.0 can confirm but the adb commands will work.
I have enclosed screenshots for better understanding.
you have mentioned that you are in Android 7.0
Can you tell me your exact firmware that you have on your phone at the moment?
After you get rid of that red message. Your bootloader is unlocked.
There is Erecovery process - > steps below (but there is a problem with this process)
1)Switch off the phone.
2) Press and hold the volume up button and then connect your phone to computer or charger. Yes charger. Then you can download stock firmware through your WIFI - > this will also install stock firmware. But I think this won't work because of unlocked bootloader
So once again install the TWRP for Android 7.0 I think it is Twrp 3.0.2 or Twrp 3.0.3 - > this is definitely for nougat.
ADB command to install twrp recovery is
fastboot flash recovery twrp.img ( rename the TWRP to twrp.img ) in the adb.
Try to flash the stock firmware zip files in TWRP.
Here you have two options - > You can either try flashing B386 files (only one zip file) or B562 (android 7.0 - > 2 zip files - first update.zip and then the other zip file)
If you are successful in this step then your TWRP will be overwritten with stock recovery.
That is ok. don't worry. Kangvip ROM is pre-rooted ROM. So you will get root in the end. For now its ok to be on Stock at this step.
Stock Recovery + Stock ROM + bootloader locked -> then you can dload back to EMU 4.1 using B386 firmware.
Then you can unlock bootloader (again) yes its a pain + followed by TWRP + ROOT - one after the other in SRK tools its all there. you can use the options in SRK tools this time.
And once you have root again.
Take backup and save it on your SD card. (except DATA , take backup of all options listed there, why? bcoz if you include data - > it will increase the backup size and it will take more time.
*Disclaimer* -> Very tricky & risky process - proceed with caution & full attention
Then - > you can debrand - > to C432 -(debranding is very tricky process, so keep your backup handy) This should be done very carefully because any problem here means you might find less space on your internal memory. Then you will have to restore that backup to get back your space.
Here is the link to excellent tutorial by somboons Watch it carefully.
https://www.youtube.com/watch?v=JZVsIKtdgV4
Just follow that as it is for debranding from AL10 to L29-C432
I am very very sorry for all these confusing and tricky steps. Please proceed with caution when you are doing the debranding process. Do not get diverted during that process.
Yes I did all this when I debranded my Huawei Mate 8 AL10 to L29. I had lot of anxious moments, doubts & my mind started playing tricks if mate 8 was dead on few occassions. But in the end my phone prevailed. Now I am happily using L29 - Kangvip B577. That is where I want you to land up in the end.
Do not worry and do not panic any time. Be prepared to face few challenges during this process. I will help you but please share your experience and follow the steps carefully.
During debranding you might have your phone rebooting or something might happen. That time do factory reset and continue from where you left off. If you get red message - > then you have to unlock bootloader. Otherwise continue.
This whole process will test your patience & consume time. So I hope you are willing to do this. Its worth it. I learnt my lesson, I am never buying chinese version of Huawei phones/tablets again. Only European models from now onwards.
Finally
Do not forget to click on :good::good::good::good::good::good::good:
I hope you understand.
I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?
Options
bodzio3333 said:
I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?
Click to expand...
Click to collapse
TWRP 3.1.0.2 is actually used for flashing nougat firmwares.
Which firmware are you on right now?
Are you on nougat or marshmallow? Please provide the full firmware build number.
if your phone is on marshmallow.
TWRP version depends on your firmware.
If you are on EMUI 4.0/4.1 then pls use the TWRP 3.0.2
you can use SRK tools to install that TWRP if you are on EMUI 4.0/EMUI 4.1
Install that version. Then
Factory reset
Flash the B386 zip file in TWRP.
You can get the B386 from here https://forum.xda-developers.com/showpost.php?p=69331930&postcount=1338
If your phone is on Android Nougat.
Then you have to use dload method.
Unzip the B386 zip file.
Put the update.app in the dload folder inside your external sdcard.
Go to your dialer
*#*#2846579#*#*
Select "software upgrade"
then Select - > SD card upgrade.
And then it will reboot and install the stock firmware.
This thread has all the Stock firmwares.
https://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
Hope the above steps solve your problem. If not, then we will try something else. please answer all the questions to help you better especially your full build number (firmware version).
:good::good::good::good::good:
Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?
TWRP & Erecovery methods
bodzio3333 said:
Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?
Click to expand...
Click to collapse
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Go to settings - > about you should see that B584. in build number.
If your build number is showing anything other than test-keys then you will be able to use dload method or Hisuite method using PC.
Now if IT IS showing B584, then you can dload to B386. then unlock bootloader -> TWRP using SRK tools - > Root - > and then debrand to L29C432. - > this is the road map for you. we will go through this only after you succeed in the above steps.
Try the below steps only if the above steps don't work
if you want to flash the nougat recovery
then unzip the zip file in link 1.
Use Huawei update extractor software HuaweiUpdateExtractor_0.9.9.3
and then extract the recovery.img from the update.app file.
now
switch on usb debugging in your settings.
switch off the phone
press & hold volume down and then connect to phone to laptop
put the extracted recovery.img file in the same folder as the SRK tools
open SRK tools
type 000 to enter command prompt
type fastboot flash recovery recovery.img
(please remember all these steps that use adb commands come with element of risk. so please proceed with caution and go slow. Proceed with these steps only if you know what you are doing otherwise do not proceed)
Try the TWRP steps first and see if that will resolve your issue before flashing any stock recovery. If your flashing through TWRP then it will install stock recovery & stock ROM.
Please share your progress.
:good::good:
Samavb said:
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Click to expand...
Click to collapse
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?
2 Answers
bodzio3333 said:
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?
Click to expand...
Click to collapse
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:
Samavb said:
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:
Click to expand...
Click to collapse
When I flash B584.zip see this error in twrp:
Failed to mount '/cust' (invalid argument)
Failed to mount '/version' (invalid argument)
E:unknown command [errno]
E:unknown command [errno]
Update process ended with ERROR: 7
No good.....
Hello,
Got a WAS-LX1A SINGLE SIM 4GB UK (with an updated WAS-LX1AC432B185 firmware).
Trying to go back to stock but all firmware (WAS-LX1AC432B179, WAS-LX1AC432B186, WAS-LX1AC432B187) which has been downloaded using Firmware Finder is failing via dload method: "Software Install Failed"
Any ideas or a link would to a firmware where I can start would be good,
Thanks
buddimanv said:
Hello,
Got a WAS-LX1A SINGLE SIM 4GB UK (with an updated WAS-LX1AC432B185 firmware).
Trying to go back to stock but all firmware (WAS-LX1AC432B179, WAS-LX1AC432B186, WAS-LX1AC432B187) which has been downloaded using Firmware Finder is failing via dload method: "Software Install Failed"
Any ideas or a link would to a firmware where I can start would be good,
Thanks
Click to expand...
Click to collapse
hi:
check this:
b182 =ds: 182, 184, 186 and so on....
b183= ss: 179, 183, 185, 187 so on...
-------------------------------------===== follow instructions of below if is bricked
now:
you need unlock bootloader
oeminfo ss
srom b183
twrp
sdcard
1- with a sdcard, create dload folder, then extract b183 and copy update.app + all was folders.
2- enable developer settings and enable oem unlock, poweroff and press vol-+power, then fastboot oem unlock code, then follow the screen(configs)
3- move twrp to c:/adb, with a cmd opened type cd c:/adb press enter, and type fatboot flash recovery recovery.img, finished type fastboot reboot plus pressing vol + till erecovery screen, shutdown and unplug, press vol+ power.
4- insert sdcard and make only a backup of your oeminfo, extract downloaded oem and copy/replace in twrp back folder, then restore in twrp. power off now only do 3buttons method
Thanks foliaje, I have tried WAS-LX1AC432B179 and its not working. The phone boots fine. Basically, I rooted and it tried to update via TWRP and failed. Now trying to restore to stock and getting this error. DO you have a link to the exact firmware that I can try - tried several of them now and its failing.
Ok, I managed to go back to stock by downloading via Firmware Finder. So, dload method via SD Card don't work with this phone or what? Would appreciate if someone can confirm?
buddimanv said:
Thanks foliaje, I have tried WAS-LX1AC432B179 and its not working. The phone boots fine. Basically, I rooted and it tried to update via TWRP and failed. Now trying to restore to stock and getting this error. DO you have a link to the exact firmware that I can try - tried several of them now and its failing.
Click to expand...
Click to collapse
links below and follow the guide of above, by the way otas doesnt work with twrp or/and root.
if your p10lite came with b183(confirm please) now you must have installed b185 or b187
https://drive.google.com/open?id=0B-k_1rnfFeEvTjkyLXNSVjVTSm8 oeminfo
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097 download servicerom b183
foliaje said:
links below and follow the guide of above, by the way otas doesnt work with twrp or/and root.
if your p10lite came with b183(confirm please) now you must have installed b185 or b187
https://drive.google.com/open?id=0B-k_1rnfFeEvTjkyLXNSVjVTSm8 oeminfo
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097 download servicerom b183
Click to expand...
Click to collapse
Hey foliaje, Thanks for your help, appreciate it.
Let me explain my issue: I have purchased my phone yesterday, it upgraded to 185 (I am assuming it was B183, didn't check) via OTA. Then I almost finished setting up the phone including ROOT but a b187 OTA appeared little bit later but failed because I had TWRP already installed. That's fine, no problem. So wanted to start again like I usually do - download the firmware, put on sd card and off you go......
But the problem with this phone is (and I had quite few Huawei one's including tablets) when I downloaded the full firmware, using the SD card dload method I get "Software Install Failed" but it seemed to have worked when I did it via Firmware Finder (I am on B187 now). So something not right - either something has changed or I need to do something else.
So what's the issue? The only think I can think of here is that you are saying that this phone require a 'service' firmware that does not do authentication or something? Right? I am downloading C432B183 from your link and will see what happens (bit slow).
I really would like to know now so I can get back to stock when I mess things up
OK...I followed as below:
Downloaded http://androidhost.ru/JS
(1) Copied main UPDATE.APP to dload folder
(2) Then renamed WAS-L01A_hw_eu\update_WAS-L01A_hw_eu.app to UPDATE.APP and copied to dload folder
Is above method correct, can we do it in one go?
Anyway, I think it has worked (had to do few reset) but the firmware version was showing WAS-LX1AC432B179 - is that correct? OTA upgraded to WAS-LX1AC432B185
buddimanv said:
WAS-LX1AC432B179 - is that correct
Click to expand...
Click to collapse
yeah it is correct, by the way in 2) is not necesary rename the update.app only copy all folders to sdcard
foliaje said:
yeah it is correct, by the way in 2) is not necesary rename the update.app only copy all folders to sdcard
Click to expand...
Click to collapse
Thanks dude, appreciate your help.
Now - any ideas why the firmware finder firmware's don't work on this phone via dload method?
buddimanv said:
Thanks dude, appreciate your help.
Now - any ideas why the firmware finder firmware's don't work on this phone via dload method?
Click to expand...
Click to collapse
In the UK and have exact same model. Filmware finder did not work for me also. The one in the link below did though! Its the first download you need. Copy the update.app and the folder 'L01A' to the 'dload' folder on your sd card. Does your phone boot? If so in the dialer type *#*#2846579#*#* and choose software upgrade then sd card update, it will then flash the filmware to pure stock.
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
stonedpsycho said:
In the UK and have exact same model. Filmware finder did not work for me also. The one in the link below did though! Its the first download you need. Copy the update.app and the folder 'L01A' to the 'dload' folder on your sd card. Does your phone boot? If so in the dialer type *#*#2846579#*#* and choose software upgrade then sd card update, it will then flash the filmware to pure stock.
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
Click to expand...
Click to collapse
Yes, its all good now. Bizarre - Huawei making things difficult now. Which TWRP are you using? Can the TWRP backup function works for you i.e. encryption disabled?
My device is p9 lite vns l31( c636) before i used elite roam v7.6. but now i want to go back stock roam. To go back i used roall back mm and c636b170 full ota. But now my devise build number is c900b170. I want to upgrade nauget c636. Please help me.
rathnayakepr3 said:
My device is p9 lite vns l31( c636) before i used elite roam v7.6. but now i want to go back stock roam. To go back i used roall back mm and c636b170 full ota. But now my devise build number is c900b170. I want to upgrade nauget c636. Please help me.
Click to expand...
Click to collapse
Hello man,
did you removed prevoius update.app from SD card, the one from rollback??
Maybe you forgot to do this...
If you sure you done all things right then take a look at the UNIFIED HELP THREAD...
At 6th post you'll find a L31 rollback package that will give you C900B300 global firmware.
From this flash C636B170 full ota and see if worked this time....
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
Dadditz said:
Hello man,
did you removed prevoius update.app from SD card, the one from rollback??
Maybe you forgot to do this...
If you sure you done all things right then take a look at the UNIFIED HELP THREAD...
At 6th post you'll find a L31 rollback package that will give you C900B300 global firmware.
From this flash C636B170 full ota and see if worked this time....
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
Click to expand...
Click to collapse
.
But i donnt know how to flash oem info and custom bin through the toolkit. Please help me.
rathnayakepr3 said:
.
But i donnt know how to flash oem info and custom bin through the toolkit. Please help me.
Click to expand...
Click to collapse
Hello dude,
in the guide i never readed to use the toolkit, that's another way i think...
Flashing the rollback package will bring you c900b300 firmware wich means global intermediate transitive firmware...
Create a dload folder in SD card, extract update.app from rollback package and put in it.
Turn off you phone. Now disconnect from PC, and let it start keeping vol+ vol- and power buttons.
When it ends turn it off and remove the SD card and the update.app from dload folder.
Download and extract update.app from L31C636B170 full update.
If you missed it...
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66846/f1/full/update.zip
Put this in dload folder in SD card again and put in your phone...
Repeat vol+ vol- power buttons and it will flash...
Recommended: when finished reboot to e_recovery (vol+ power buttons) and factory reset.
If all gone well you will stay now on marshmallow firmware..
Wish you the best my friend...:fingers-crossed:
Edit: flash the rollpack package suggested in prevoius post.
All credits goes to @dariomrk and other contributors that create the thread.
Thank you guys.
Hi Dears
i have p8 lite ALE-L21
i cant unlock bootloader
i searched a lot but i found old way from huawie site that not working now
so how i do this now after site closed ?
the reason for i want to unlock bootloader that i want to install twrp and root my device or use any other ROM
so please help me
thanks and waiting your answer
the reason for i want to unlock bootloader that i want to install twrp and root my device or use any other ROM
so please help me
zamlkawy said:
the reason for i want to unlock bootloader that i want to install twrp and root my device or use any other ROM
so please help me
Click to expand...
Click to collapse
Hi
If you want to unlock bootloader, you have to:
- downgrade to the first version of Android provided by Huawei
- root it with one of the dozens of one-click-root tools (personally I use Kingroot)
- do what mentioned here https://forum.xda-developers.com/p8lite/general/alternative-method-unlocking-bootloader-t3799294
- done :highfive:
Worked well with me, without problems
thanks for your reply
where i can get first version of Android provided by Huawei to this device
zamlkawy said:
thanks for your reply
where i can get first version of Android provided by Huawei to this device
Click to expand...
Click to collapse
Do you have single SIM or dual?
faby GT said:
Do you have single SIM or dual?
Click to expand...
Click to collapse
I have the same question, do you have the rom for dual-sim?
xperia81 said:
I have the same question, do you have the rom for dual-sim?
Click to expand...
Click to collapse
Do you mean stock ROM first version? Sure!
Only for dual SIM:
- download these two packages http://download-c.huawei.com/download/downloadCenter?downloadId=79348&version=317012&siteCode=it and https://docs.google.com/uc?id=0B7aKdgGvGVwrRHBaNVo4VHdDVk0&export=download
- put JUST THE FIRST LINK's unpacked "update.app" file inside your phone's folder "dload" (if you don't have one, create it)
- shut down the phone
- boot up the phone by keeping pressed all the buttons (Power + volume up + volume down)
- wait until the process ends
- then delete the "update.app" from your phone and replace it in the same "dload" folder with the "update.app" file from the SECOND link unpacked folder
- shut down and then boot up the phone with all buttons pressed
- done :highfive:
faby GT said:
Do you mean stock ROM first version? Sure!
Only for dual SIM:
- download these two packages
- put JUST THE FIRST LINK's unpacked "update.app" file inside your phone's folder "dload" (if you don't have one, create it)
- shut down the phone
- boot up the phone by keeping pressed all the buttons (Power + volume up + volume down)
- wait until the process ends
- then delete the "update.app" from your phone and replace it in the same "dload" folder with the "update.app" file from the SECOND link unpacked folder
- shut down and then boot up the phone with all buttons pressed
- done :highfive:
Click to expand...
Click to collapse
Yes I meant stock rom.
Is bootloader unlock necessary in this way?
Thanks for this explanation, I will try it out soon.
xperia81 said:
Yes I meant stock rom.
Is bootloader unlock necessary in this way?
Thanks for this explanation, I will try it out soon.
Click to expand...
Click to collapse
No, they're official update packages.
Most important thing: you don't have to have TWRP installed (just stock recovery)
PS: if it was helpful, hit "thanks" button :highfive:
Hi. During recent days I had same problem. I've got ALE-L21 dual sim comp. number ALE-L21C09B180 and while i'm trying to flash from dload folder with first link i'm getting stuck at around 8% with an flashing error ;/ Any ideas?
koperkowy said:
Hi. During recent days I had same problem. I've got ALE-L21 dual sim comp. number ALE-L21C09B180 and while i'm trying to flash from dload folder with first link i'm getting stuck at around 8% with an flashing error ;/ Any ideas?
Click to expand...
Click to collapse
Hi
first of all, is your bootloader LOCKED? Do you have stock recovery (=no TWRP)? (I know you are trying to get unlock code, but maybe you had brick problems and lost code)
If yes, try firstly the easiest things:
Delete update.app
Delete dload folder
Reboot
Connect phone to PC
Download again with your PC the first zip and extract it (in your PC), and then copy the dload folder in your phone
Try again
If it still doesn't work, let me know
My P8 lite has locked bootloader (technically it's my mother's phone, I want to flash it with custom rom coz it's really slow and unusable on it's stock rom). Do the bootloader was never unlocked, I do not have a code to unlock it.
What's steps should I undertake to flash it successfully?
1. Unlock bootloader
2. Root
3. Flash twrp
4. Flash rom
Is that correct? How do I unlock bootloader while Huawei stopped providing unlock codes?
I really appreciate your help in this post, thanks faby.
koperkowy said:
Is that correct? How do I unlock bootloader while Huawei stopped providing unlock codes?
I really appreciate your help in this post, thanks faby.
Click to expand...
Click to collapse
Get code from dc-unlocker site like me. Cost a few $.
zkoz said:
Get code from dc-unlocker site like me. Cost a few $.
Click to expand...
Click to collapse
Why pay if you can get it free?
koperkowy said:
My P8 lite has locked bootloader (technically it's my mother's phone, I want to flash it with custom rom coz it's really slow and unusable on it's stock rom). Do the bootloader was never unlocked, I do not have a code to unlock it.
What's steps should I undertake to flash it successfully?
1. Unlock bootloader
2. Root
3. Flash twrp
4. Flash rom
Is that correct? How do I unlock bootloader while Huawei stopped providing unlock codes?
I really appreciate your help in this post, thanks faby.
Click to expand...
Click to collapse
You have to downgrade it first to Android 5
Root it with Kingroot
In your PC, install this https://forum.xda-developers.com/showthread.php?t=2588979 if you don't have access to ADB commands
Do then what mentioned here (after connecting your phone to your PC and enabling "USB debug" inside developer options in your P8 lite) https://forum.xda-developers.com/p8...ve-method-unlocking-bootloader-t3799294/page1
Unlock bootloader with the code you got from the above step (just follow what written in the link)
Flash TWRP
(If you want, flash custom ROM or updated stock ROM)
(If you did it, boot the ROM and then reboot to TWRP)
Flash magisk (the safest way to get root)
simply F said:
You have to downgrade it first to Android 5
Root it with Kingroot
In your PC, install this https://forum.xda-developers.com/showthread.php?t=2588979 if you don't have access to ADB commands
Do then what mentioned here (after connecting your phone to your PC) https://forum.xda-developers.com/p8...ve-method-unlocking-bootloader-t3799294/page1
Unlock bootloader with the code you got from the above step (just follow what written in the link)
Flash TWRP
(If you want, flash custom ROM or updated stock ROM)
(If you did it, boot the ROM and then reboot to TWRP)
Flash magisk (the safest way to get root)
Click to expand...
Click to collapse
For some reason I cannot proceed with rollback flashing. Even after deleting dload folder, downloading fresh file, rebooting the phone. Still stuck on 8%.
koperkowy said:
For some reason I cannot proceed with rollback flashing. Even after deleting dload folder, downloading fresh file, rebooting the phone. Still stuck on 8%.
Click to expand...
Click to collapse
Hi
If you go to system information inside settings, what do you see as "Android version"?
simply F said:
Hi
If you go to system information inside settings, what do you see as "Android version"?
Click to expand...
Click to collapse
Android 5.0.1
Emui 3.1.1
Compilation number ALE-L21C09B180
koperkowy said:
Android 5.0.1
Emui 3.1.1
Compilation number ALE-L21C09B180
Click to expand...
Click to collapse
Hi
"Rollback" (or downgrade) is the contrary of update. So, when I said "rollback to Android 5" I meant "downgrade from Android 6 to Android 5"
You can't downgrade because you HAVE Android 5, so you have just to BACKUP EVERYTHING (because unlocking bootloader you erase all data) and follow the step-by-step guide I have written above, skipping the "rollback" step :highfive:
Less things to do :good:
simply F said:
Hi
"Rollback" (or downgrade) is the contrary of update. So, when I said "rollback to Android 5" I meant "downgrade from Android 6 to Android 5"
You can't downgrade because you HAVE Android 5, so you have just to BACKUP EVERYTHING (because unlocking bootloader you erase all data) and follow the step-by-step guide I have written above, skipping the "rollback" step :highfive:
Less things to do :good:
Click to expand...
Click to collapse
That's what I thought as well but I cannot get through the first step witch is rooting by kingroot. I'm just getting an information that kingroot wasn't able to root my device.
koperkowy said:
That's what I thought as well but I cannot get through the first step witch is rooting by kingroot. I'm just getting an information that kingroot wasn't able to root my device.
Click to expand...
Click to collapse
Hi
Enable usb debugging inside developer options, then try again until it works (cause it works).
If it still doesn't work, download Kingroot for pc and connect phone to it.
Else, try with other one-click-root tools (as Kingoroot, there is not much imagination for names :laugh: )
Done the root, the procedure is much easier.