Related
A lot of people asked me why i had a fully working Resurrection Remix M on my ZF2 (ZE551ML) while actually they're having troubles with Camera (not working at all/FC), Gapps and/or with initial setup.
Well, actually it isn't really difficult.
I read some posts about CM13 ports for other phones, and I figured out that we had alot of common bugs, such as the Camera, for example.
Well, let's see how to solve this, starting from a simple and clean install.
Download CM13 or CM13 based ROM, and OpenGapps x86 for 6.0. KEEP SURE TO DOWNLOAD THE FULL PACKAGE (NOT THE STOCK ONE!!!) OR THE SMALLER ONES, KEEP SURE THEY DON'T REPLACE AOSP CAMERA WITH GOOGLE CAMERA!
Perform a full TWRP or Nandroid Backup.
Perform a full wipe (wipe data, cache, dalvik)
Install CM13/CM13 based ROM
Fix Permissions (for TWRP, it's under the Advanced menu)
Wipe Cache and Dalvik Cache
Reboot to System, then wait for the phone to boot. (~10min)
Config your phone, and now you'll see that Camera it's fully working now.
Reboot to Recovery
Install Gapps, then wipe cache and dalvik cache again.
Reboot to System and enjoy your CM13
EXTRA: To get the ASUS PixelMaster Camera working, you should download the flashable zip from THIS thread, and flash it in TWRP. DON'T TRY THE SUPER RESOLUTION MODE AT ALL OR CAMERA IMAGES WILL BE RENDERED GLITCHED UNTIL YOU RE-DO A CLEAN INSTALL!
Tested on ZE551ML with Resurrection Remix M v5.6.0r3 build 20151230, and CM13 NIGHTLY 20160102.
It's fully working, also with Retrica and PixelMaster Camera.
I'll post some screenshots soon.
When i'll find some friends with ZE550ML, i'll try this also on that version of the phone, but i'm pretty sure this will work, as the workarounds I just found are common, for other non-ASUS devices, which are also ARM!
Could you please explain how I would install TWRP? Seen alot of different guides, but most of them are old ones or leave a few questions still remaining...
Sent from my ASUS_Z00AD using Tapatalk
domacikolaci said:
Could you please explain how I would install TWRP? Seen alot of different guides, but most of them are old ones or leave a few questions still remaining...
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
You need to unlock your bootloader first. If you need help, we can talk via PM (Private Messages), because there are alot of threads and guides about this.
Added to index, thanks for your work!
TL;DR: HDR+ mode is gone, except on stock factory image. Any solutions?
Guys, I really need some help with this one.
I love my 6P and it's camera, especially the HDR+ mode.
Until some time ago it worked fine but at some point, HDR+ jsut vanished from the camera. I tried out different ROMs but that that didn't solve the problem.
I flashed the factory image via fastboot and yes, HDR+ is back!
One problem, stock android doesn't have much features, so I flashed Pure Nexus.
And HDR+ is gone again...
I really can't figure this one out, and I'm at the point of giving up, I'm losing sleep and need my phone to be working before I go on vacation.
Can anyone help my with this one?
As far as I know I flashed everything correctly, and even started from scratch by flashing the factory image.
1. Flashed factory image with the flash-all.bat
2. Flashed TWRP 3.0.2.0
3. Reboot into recovery and Format Data to remove encryption
4. Mount in TWRP and place PureNexus, PureNexusGApps, and the MTC19V vendor.img
5. Flash the ROM, then Gapps, then Vendor to the vendor partition
6. Reboot system, rom boots up without problems, I set up me e-mail and fingerprint.
7. I open the camera app and HDR+ isn't there.
Anyone?
herecomedatboi said:
TL;DR: HDR+ mode is gone, except on stock factory image. Any solutions?
Guys, I really need some help with this one.
I love my 6P and it's camera, especially the HDR+ mode.
Until some time ago it worked fine but at some point, HDR+ jsut vanished from the camera. I tried out different ROMs but that that didn't solve the problem.
I flashed the factory image via fastboot and yes, HDR+ is back!
One problem, stock android doesn't have much features, so I flashed Pure Nexus.
And HDR+ is gone again...
I really can't figure this one out, and I'm at the point of giving up, I'm losing sleep and need my phone to be working before I go on vacation.
Can anyone help my with this one?
As far as I know I flashed everything correctly, and even started from scratch by flashing the factory image.
1. Flashed factory image with the flash-all.bat
2. Flashed TWRP 3.0.2.0
3. Reboot into recovery and Format Data to remove encryption
4. Mount in TWRP and place PureNexus, PureNexusGApps, and the MTC19V vendor.img
5. Flash the ROM, then Gapps, then Vendor to the vendor partition
6. Reboot system, rom boots up without problems, I set up me e-mail and fingerprint.
7. I open the camera app and HDR+ isn't there.
Anyone?
Click to expand...
Click to collapse
Custom Roms include the open source versions of the camera app. To use google camera which has HDR+ mode available, do the following:
1.) Open Google playstore and open the hamburger menu.
2.) Press "My Apps and Games"
3.) On the resulting page select the "All" tab then find and download google camera.
You will likely have to do the steps mentioned above as google camera will not appear when you search for it within playstore. Another method you can try would be to download a full gapps package which includes google camera, though I'ver never tried that.
Just download and install Google camera from apkmirror and you'll be fine.
Sent from my Nexus 6P using XDA-Developers mobile app
The problem is that no matter what camera app I try, the HDR+ toggle is not there, I'll try to start from scratch again and see if the issue is still there.
Update: HDR+ is now working again
Possible solution for people with this problem
Yesterday after flashing Factory Images via fastboot and flashing TWRP, I booted in TWRP and did Format Data.
Today I reflashed the Factory Images, reflashed TWRP, but this time did "fastboot format userdata" and then did a data, system, cache/dalvik cache wipe in TWRP.
I reflashed Pure Nexus and so far everything seems to be working as should, and HDR+ is available and working.
The issue started when returning from N Preview to M, I might have messed up something there.
Thanks for the input guys, seems like it was my own fault, and me being in a hurry didn't do any good.
Hello guys, this is my first guide here. So as the title says, I will show you how to install Lineage OS on your Redmi Note 3 device (kenzo).
So before following the guide, your device should have a unlocked bootloader and TWRP recovery.
I will also tell you how to fix in calls audio issue if you are facing it after installing Lineage OS 14.1
So let's begin.
First download the rom (refer to the official thread).
Download Cm14.1 firmware for kenzo (you can find it in the same rom thread)
Download Gapps (any package like micro or nano)
Procedure:-
1- Boot to TWRP recovery.
2- Go to wipe menu. Wipe system, data, dalvik cache and cache.
3- Now go to mount, and mount cust and persist.
4- Go to install. Select the firmware zip file you had downloaded. Install it. (This fixes in call audio problem)
5- After installing it you can unmount cust and persist from the mount menu.
6- After it flash the official Lineage OS rom which you had downloaded. (Install menu, zip)
7- After rom is flashed, flash Gapps package. (Install menu, zip)
8- After flashing Gapps, go to wipe and wipe cache, dalvik cache.
9- Reboot your device
10-Enjoy!
First Reboot will take a while so don't panic... Download Google camera if you want a more stable camera (since stock is quite buggy).. Also you can use Umang's Flashlight fix for the buggy Flashlight button.
Just in case you want to root the device, just download root add-on (found in official thread)
Enjoy the experience.. ?
xzy99 said:
Hello guys, this is my first guide here. So as the title says, I will show you how to install Lineage OS on your Redmi Note 3 device (kenzo).
So before following the guide, your device should have a unlocked bootloader and TWRP recovery.
I will also tell you how to fix in calls audio issue if you are facing it after installing Lineage OS 14.1
So let's begin.
First download the rom (refer to the official thread).
Download Cm14.1 firmware for kenzo (you can find it in the same rom thread)
Download Gapps (any package like micro or nano)
Procedure:-
1- Boot to TWRP recovery.
2- Go to wipe menu. Wipe system, data, dalvik cache and cache.
3- Now go to mount, and mount cust and persist.
4- Go to install. Select the firmware zip file you had downloaded. Install it. (This fixes in call audio problem)
5- After installing it you can unmount cust and persist from the mount menu.
6- After it flash the official Lineage OS rom which you had downloaded. (Install menu, zip)
7- After rom is flashed, flash Gapps package. (Install menu, zip)
8- After flashing Gapps, go to wipe and wipe cache, dalvik cache.
9- Reboot your device
10-Enjoy!
First Reboot will take a while so don't panic... Download Google camera if you want a more stable camera (since stock is quite buggy).. Also you can use Umang's Flashlight fix for the buggy Flashlight button.
Just in case you want to root the device, just download root add-on (found in official thread)
Enjoy the experience..
Click to expand...
Click to collapse
it this a joke? this looks like a chinese copy of a guide posted 1 week ago and is only 2 posts under this:
https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154
what is your intention?
@massan1 I hope you have eyes through which you can read properly. No offence brother. Well, I didn't copy it. Plus that guide is made for those who have locked bootloader. Second, I am posting this for those who want to clean install Lineage OS with the call audio fix. So, if you believe I have copied it , just keep believing it.
Keep burning.. I'll get ice packs for you. Thanks.
I was on cm 13 before flashing lineage OS 14.1..Now the issue iam facing is that while making calls without headphones the both myself and other person won't hear a thing. On reverting back to cm 13 everything works fine. Currently on nightly 07.02.2107
r28 said:
I was on cm 13 before flashing lineage OS 14.1..Now the issue iam facing is that while making calls without headphones the both myself and other person won't hear a thing. On reverting back to cm 13 everything works fine. Currently on nightly 07.02.2107
Click to expand...
Click to collapse
just flash upgraded firmware or change build.prop:
https://forum.xda-developers.com/re...stall-lineage-os-locked-t3546154/post70826457
Raaj52 said:
This is not a build.prop issue!! In order to work with the old firmware (patched one) you have to make fluence to none, this is done when you use patched VoLTE. If you make fluence to none the latest MM firmwares won't give sound in call, many are getting no sound because they are using the old patched firmware. Since the native VoLTE is fixed no need of the old firmware and you don't need to change fluence to none. Just flash the latest firmware and you are good to go.
Still doubt? OK then I need to tell you one more thing, The first patch for VoLTE for MIUI MM was made by me (you can check that in MIUI Global forum) and sudeep made a firmware.zip with my NON-HLOS.bin and I can see that the same is copied in the firmware.zip, in order to get fluence working in the patched firmware it should have used with the correct adspso.bin.
Many are thinking that changing firmware is useless but in reality it comes with lot of stability fixes, so I recommend everyone to update your firmware to the latest one instead of all this build.prop editing craps.
What is the problem if I edit build.prop? --> You have to edit your build.prop whenever you flash a ROM, you can't avoid it unless you flash the latest firmware.
Why I am so confident? --> Because I know what is firmware and How does it work!
If you have "no sound in calls" issue even after you change the firmware I recommend a clean mi flash tool flashing with the latest MIUI ROM (because it will fix all your partition related stuffs, instability issues)
@abhishek987 @akhilnarang could you please add the "solution for no sound in calls is to flash the latest firmware" in your first post?
Click to expand...
Click to collapse
B352 Boot_Insecure_B352_Fix-adb_dm-verity-v2.img
Download:
Download
Many thanks for created goes to Franzroy from Mate 8 Forum
Flash via Fastboot,boot into Twrp and flash Supersu 2.82
New Update to B350 Stock rooted
Downloads:
Download B350 Stock Rom
Download Twrp 3.1.0-3 from P9 Plus Eva
Download Boot_Insecure_B350_Fix-adb_dm-veritySpezial Thanks to franzroy from the Mate 8 Forumfor the Boot img
1,Wipe everything in Twrp,Format Data with "yes",in advanced wipe Dalvic,Cache,System,Data,Cust and internal Storage
2,install B350 Stock Rom in Twrp and Reboot
I add in the Rom Google Playstore,Calender and Contact Sync,Gmail and Youtube,Chrome and replace the PicoTTS with GoogleTTS (PicoTTS it does not work)
You can uninstall all extra Google Apps which I have added.
Rooted with Stock Boot img
I downloaded the update with Firmwarefinder,more times but it of 3 files only one functioned.
I have then put days-long and have managed to make from 2 scripts one and it is working.
You have a Full Rom with included Userdata.
New Root Procedure B332 works 100% and very easy
Downloads:
Download B332 Full
Boot_Insecure_B332_Fix-adb_dm-verity.img Spezial Thanks to franzroy from the Mate 8 Forum Without him it would not be possible!
3.1.0-0 Twrp
Superuser for Emui 5
Download all 4 Files (Full Rom B332,Boot_Insecure_B332_Fix-adb_dm-verity.img,Twrp and Supersu.)
Extract Full Rom B332 with Winzip or 7zip,Winrar....
Copy Full B332 Rom (Update.zip,update_data_full_all_cn.zip),Supersu on your SD Card.
1 Install Twrp via Fastboot or in Twrp via Image flash.
2 Install update_data_full_all_cn.zip (Don´t Reboot after install this)
3 Install update.zip and Reboot into System and make via Settings a Low Level Factory Reset (Factory Reset with internal Memory to mount Data in Twrp)
4 Install Twrp again via Fastboot
5 Flash in Twrp via image flash the Boot_Insecure_B332_Fix-adb_dm-verity.img (Or flash via ADB,both Variants works)( fastboot flash boot Boot_Insecure_B332_Fix-adb_dm-verity.img )
6 Flash Superuser for Emui 5
7 Reboot -Finish
Are you already on B332 with Twrp installed,flash via Fastboot or Twrp image flash the Boot_Insecure_B332_Fix-adb_dm-verity.img and then Superuser for Emui 5
I'm not sure if it works.
Supersu is not installed download from here and install
Download Supersu.apk
Here is Google Contact and Calender sync and the lastest Playstore.
Unpack the file and install as apk.
Download Google Pack
OLD Root Prozedure B320 Does not work 100%
Same Procedure,Flash in Twrp,i flash from B029 and works
The first Beta of Nougat for the Honor note 8.
The official version will be released next month in April
I have made some screenshots under Attachment
Emui 5.0 now has an appdrawer!(See the Pic´s in Attachment)
Attention
At the moment there is no way to go back to Emui 4.1
Requirements:
Unlocked Bootloader Here Thanks to jdantow for Manual
Installed B029 Stockrom
Installed old Twrp for Emui 4.1 Download
You Need:
Copy all the Things in your Extenal Memory/SD Card you need in Rooting Part
Decrypted Data Boot.img B320 Download Special Thanks to franzyroy for Creating the Decrypted Boot img
Twrp for Emui 5.0 Download
Here is a another Thread for Twrp,but this works not for me,i can´t Data not mount
Superuser for Emui 5.0 DownloadThanks to Chainfire for Supersu
Update.zip and update-data_full_all_cn.zip Here Thanks WhySoSeriousJoKer for Uploading
First:Install Full B320 Stockrom without Root
Are you on Android 6.0 Emui 4.1 B029 Stockrom
1.Boot into Twrp and Wipe Factory reset
2.Wipe --> Format data --> to write: yes - confirm
3.Install update_data_full_all_cn.zip - Don't reboot
3.Install update.zip
6.Reboot Wait 5 minutes (Possibly a factory reset If the device does not boot)
You are on B320 Android 7.0 with Emui 5.0 (Stock Recovery after this Procedure is installed)
Second:Root the Device
1.Stock Recovery is installed, Twrp must be installed again the new Version for Emui 5.0
2.Install the B320 Decryped Boot.img in Trwp ( or via Adb/Fastboot
3.After installed the Decryped Boot.img Boot into Twrp and Wipe --> Format data --> to write: yes - confirm,It takes very long.
4.Abort the Data Format,for this press the power button for 10 seconds until it restarts,and boot into eRecovery with Press and hold 3 Sec the Volume up.
5.In eRecovery select Format data partition.
6.After Format Data Shut Down.
7.Press First Volume up and then Power Button and hold both Buttons to Reboot into Twrp.
8.In Twrp Press Mount and see if data is mounted.Is Data Mounted is all ok.
9.Wipe/System,Data,Cache and Dalvik
10.Go back to install SuperSU-v2.79-201612051815-EMUI5.0.zip Don't reboot
11.Go Back to install and install update_data_full_all_cn.zip Don't reboot(You can extract the update_data_full_all_cn.zip and delete some China apps before they are installed)(Unpack-delete Apps/Repack with Winzip or 7 Zip)
12.Go back to install and install update.zip Don't reboot
13.Go back to install and install SuperSU-v2.79-201612051815-EMUI5.0.zip
14.Reboot the Phone it´s reboot´s Two times and it´s normal and after reboot go to Superuser App and open it,comes no error message fits everything.
After the Rooting Procedure is automatically the Stock Recovery installed!
You can reboot in Bootloader and install Twrp again and Data is Mounted.
This is almost the same procedure as the Mate 8 and I have also made it at the Mate 8 and it worked immediately
So much thanks to franzyroy
Sorry for my bad English and i hope you understand!
Mods:
Change the Icon Size:
Use Rootexplorer or Es File Manager and go to:
cust/all/cn/prop
Open the Local.prop with an Texteditor
Search the Line:
######2.BASEAPP TEAM BEGIN
under this Line write:
ro.config.app_big_icon_size=136 (or what you want the size of the icons,136 is very small,look the Pic in Attachment)
This must look like this now
######2.BASEAPP TEAM BEGIN
ro.config.app_big_icon_size=136
Save und look the right Permission torw-r--r--
and reboot
Remove in Music and Videoplayer the China Services:
same here,go in
cust/all/cn/prop
Open the Local.prop with an Texteditor
Search the Line:
######2.BASEAPP TEAM BEGIN
under this Line write:
cofig.onlinevideo.enabled=false
ro.cofig.onlinemusic.enabled=false
Save und look the right Permission torw-r--r--
and reboot
Now you have Video and Music Player without the China Online Service.
Look the Pic´s in Attachment
Or Download my local.prop with this 3 Mods ,unpack with win zip and copy the "local.prop" in cust/all/cn/prop with an File Explorer with root Support,overwrite your local.prop,Save und look the right Permission torw-r--r--
and reboot
Backup your local.prop on Micro SD Card before!
new thread old guy asking...
good idea you started new thread...
part 2
about 2.- if installing boot.img from twrp, which partition to use? bootloader? if installing from twrp I stay in twrp or must restart after install boot.ing... And 1 security question- will room boot after this?
3. and 4. you said format data takes too much time. You never suggest to wait it , but break and go in point 4.?
ivanox1972 said:
new thread old guy asking...
good idea you started new thread...
part 2
about 2.- if installing boot.img from twrp, which partition to use? bootloader? if installing from twrp I stay in twrp or must restart after install boot.ing... And 1 security question- will room boot after this?
3. and 4. you said format data takes too much time. You never suggest to wait it , but break and go in point 4.?
Click to expand...
Click to collapse
In Twrp flash Image there are only 2 options to choose from
Boot or Recovery
For Boot.img use:Boot
For Recovery Twrp or Stock Recovery use:Recovery
Yes wipe Data and after 10 sec wiping Press so long the Power Button to Reboot the Device,If you see the black background with oranges text,3 options are available.
You take Press for 3 sec Volume up to reboot in eRecovery.
In eRecovery is then Format Data Partition.Formate Data Partition and Shut Down the Phone
Reboot into Twrp go to Wipe,Wipe Data--Yes,now it works in Twrp
Go Back to Advanced Wipe and wipe Dalvik,Cache,Data and System.
Do not Reboot!
Flash supersu
Flash Update_data_all_cn.zip
Flash Update.zip
Flash Supersu again
Reboot-wait for 5 Min
Stuck on Huaweilogo Factory Reset and the Phone Booting.
Last sentence/ if final boot fail and stuck on logo, how to wipe?
I now check erecovery before start, 3 options there:
Install firmware and recovery
Shutdown
Reboot
How to wipe data from there for step 3 and 4?
Sent from my SM-T815 using XDA-Developers Legacy app
ivanox1972 said:
Last sentence/ if final boot fail and stuck on logo, how to wipe?
Sent from my SM-T815 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Step 14?
Press Power Button 10sec for reboot
During the reboot press volume up and Power Button and hold both Buttons,see you the black Background with organges text release the buttons
It´s boot to Stock recovery,Factory reset and wipe cache and reboot
the Phone boot into System
Ok, look please other part of question:
How to format data from erecovery, no this option
Sent from my SM-T815 using XDA-Developers Legacy app
I don't know if I understand correctly (I'm new to this stuff) but I got back to Emui 4.1.
I installed the Rom without root successfully but messed up the instructions to root and got stuck in some sort of bootloop.
Then Emui reinstalled a factory fresh B027 over wifi and upgraded to B029.
I think this happened with charge/data cable plugged into the PC and pressing the volume up button on reboot.
Apologies if that is not what you meant but it seems to be difficult to brick the phone
ivanox1972 said:
Ok, look please other part of question:
How to format data from erecovery, no this option
Sent from my SM-T815 using XDA-Developers Legacy app
Click to expand...
Click to collapse
I say abort the Data Wipe in Twrp and boot into e Recovery,there is a Option to wipe Data Partition,this Option is only if abort data wipe in Twrp
tiggrr1 said:
I don't know if I understand correctly (I'm new to this stuff) but I got back to Emui 4.1.
I installed the Rom without root successfully but messed up the instructions to root and got stuck in some sort of bootloop.
Then Emui reinstalled a factory fresh B027 over wifi and upgraded to B029.
I think this happened with charge/data cable plugged into the PC and pressing the volume up button on reboot.
Apologies if that is not what you meant but it seems to be difficult to brick the phone
Click to expand...
Click to collapse
Always got back with flash update_data_all_cn and Update zip.
My HN8 works fine and i root successfully
Great, I don't know this, never break wipe before. Puzzle is almost settled. I will probably try afternoon.
Have you solved viber WhatsApp notification?
And most problem: brightness drop in browser?
Thanks x 10000000.
Sent from my EDI-AL10 using XDA-Developers Legacy app
@letschky
Have you solved viber WhatsApp notification?
And most problem: brightness drop in Browser and dialer?
I copy Whatsapp in System/App,give Permissions and no Problems.
Which Brightness Problem? I have not Problems with it.
Ok, for viber and WhatsApp same solution as on 4.1?
Try any browser in middle light conditions / system reduce brightness in browser and dialer more then any other app and more then is ok for use...
https://forum.xda-developers.com/showthread.php?t=3559949
On all huawei nougat same problem
I'm having problems copying Apps on System/App folder. When I try copying the APK file, it says there is not enough space. I even tried in TWRP and it is says it can't copy it. I even tried mounting the system folder. Any ideas?
Sent from my EDI-AL10 using Tapatalk
using, it is super fast but I have some problems:
-nova launcher unread notifications counter can not be switch on. It is switched on, but go off immediately
UPD.: solved by give nova and tesla unread every possible rights in phoneManager and apps..
-it seems to me that non huawei app (google, chrome, any...) have some delay on opening, like OS check them somehow?
- browser in middle light conditions / system reduce brightness in browser and dialer more then any other app and more then is ok for use...
https://forum.xda-developers.com/sho....php?t=3559949
If somebody not see this: on middle bright conditions open chrome, brightness drop. Tap navigation key recent apps, chrome is in foreground it is clear seen that brightnes rise. tap again chrome, brightness drop whet it on stays active... ugly. it was same in emui 4.1 but as solving by batery mode performance option use instead balanced
probably they have not made battery profiles for beta version and nothing can be done...
UPD.: solved by force stop, dissable boot, freeze Power Genius (com.Huawei.powergenie) in sd maid.
maybe imonitor (com.huawei.imonitor) is also battery app, if somebody knows??
What bugs that you faced after booting the Rom ? Is this version stable for daily use
And Thank you so much for posting this thread
@letschky WHAT is best procedure to roll back to b027?
I just got this phone about 8 days ago, and I have a few questions if anyone can answer, I already had the EMUI 5.0 installed on my phone (a reset of the phone triggered a download after signing up with the Huawei ID).
1) I noticed that after I installed the decrypted boot image some of the features disappeared, like the themes, and the changing of the pictures on the lock screen, and the icons seems to be all over the place.
2) I noticed some of the settings are missing, like before rooting and unlocking there was an option to save power by making the screen dark, now it seems that option is gone.
3) If after rooting could you re-lock the bootloader and still keep root?
Also lastly, does anyone here have the english version of HiVoice (HwVAssistant.apk) thats not deodexed? I wanted to try this out but the only version I see is the deodexed and I havent tried yet but I think it still wont work on a rooted phone since the rom isnt deodexed. The reason I am asking is my car is picking it up as Siri (I know its not) but if it works like siri it would be golden.
Welp I cant get my phone back, I was trying to get back to stock, and nothing is working stuck at the honor logo, even tried to go back to emui 5.0 following the directions here, but data keeps not staying mounted. And recovery over WLan wont work because it says failed to get package info. Anybody have any ideas?
Hi guys, I have been testing the GSI AOSP ROM (from @phhusson) on our CC9e and works well most of the functions (maybe is not for daily driver but you can test and decide), except for :
-the FP sensor doesn't work
- the camera preinstalled not adjust to interface and the quality is bad (install gcam instead)
- Maybe other things
For those who want to test the AOSP Q sensation try the next steps:
You need a unlocked bootloader a TWRP working on your device and maybe some knowledge on how TWRP works.
1- Install the latest android 10 xioami.eu rom for cc9e (in order to get the vendor of android 10).
2- Download the latest AOSP 10 gsi system image (thanks to @phhusson ), extract it to get the .img file, copy it to internal memory or a otg device, then back to twrp.
2- Enter to wipe option on twrp, and slide to wipe data and cache partition, then go to install option and flash the .img file in the system partition.
3- Once it is installed just reboot to system and test the sensation of an AOSP rom
fer15 said:
Hi guys, I have been testing the GSI AOSP ROM (from @phhusson) on our CC9e and works well most of the functions (maybe is not for daily driver but you can test and decide), except for :
-the FP sensor doesn't work
- the camera preinstalled not adjust to interface and the quality is bad (install gcam instead)
- Maybe other things
For those who want to test the AOSP Q sensation try the next steps:
You need a unlocked bootloader a TWRP working on your device and maybe some knowledge on how TWRP works.
1- Install the latest android 10 xioami.eu rom for cc9e (in order to get the vendor of android 10).
2- Download the latest AOSP 10 gsi system image (thanks to @phhusson ), extract it to get the .img file, copy it to internal memory or a otg device, then back to twrp.
2- Enter to wipe option on twrp, and slide to wipe data and cache partition, then go to install option and flash the .img file in the system partition.
3- Once it is installed just reboot to system and test the sensation of an AOSP rom
Click to expand...
Click to collapse
Very nice.Thank you much more.