phone hard bricked after flashing wrong rom help please - Zuk Z1 Q&A, Help & Troubleshooting

i accidentally flashed other's device rom(lenovo a6000 plus) & had a hard brick. phone wont turn on or boot in recovery after every key combination. please help asap :crying::crying::crying::crying::crying::crying::crying:

bubbasparxx said:
i accidentally flashed other's device rom(lenovo a6000 plus) & had a hard brick. phone wont turn on or boot in recovery after every key combination. please help asap :crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Check qfil method if possible... Otherwise there's nothing to less you can do...
Check here to avoid double postings http://forum.xda-developers.com/zuk-z1/help/soft-bricked-lenovo-zuk-z1-t3544331

strongst said:
Check qfil method if possible... Otherwise there's nothing to less you can do...
Check here to avoid double postings http://forum.xda-developers.com/zuk-z1/help/soft-bricked-lenovo-zuk-z1-t3544331
Click to expand...
Click to collapse
Qfil didn't detected my phone. But after doing some research. I've found solution. Removed my back panel & disconnected battery strip for few seconds & then qfil detected [emoji16] btw I'm the one who posted ths thread. Lost that acc
Sent from my ZUK Z1 using Tapatalk

raj_jdja said:
Qfil didn't detected my phone. But after doing some research. I've found solution. Removed my back panel & disconnected battery strip for few seconds & then qfil detected [emoji16] btw I'm the one who posted ths thread. Lost that acc
Click to expand...
Click to collapse
Funny with the account :good: good to hear that disconnect battery solved your problem

Related

Hard Bricked Yureka...Need Urgent Help

Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Follow the steps shown in link below;
https://cyngn.com/support/
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
But my phone does not boot into fastboot
Search at play god forum, there are some procedures given there which may solve your prob. http://forums.yuplaygod.com/threads/help-completely-bricked.4641/#post-45794
HI thanks for help but in all above cases they were soft bricked ..i.e their phones booted in fastboot but mine isnt.
Hmmm ... seriously worried situation haan. {Kiya kya tumne}
If you can tell us what exactly you did, may be then we can help.
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Exactly me too flashed miui of f2 without boot.img..Was trying to port...
@ Suhas Is the new phone same as old one or a used one??
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Video Tutorial HOW TO UNBRICK YUREKA
Srry i cant post the youtube link as i am new here
Just go to youtube
Search kanwal deep unbrick yureka
And watch the video
To go in fastbool mode remove battery insert again and press vol up while connecting usb
quakze said:
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Click to expand...
Click to collapse
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
suhas.holla said:
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
Click to expand...
Click to collapse
I have got rom of Huawei C199s (MSM8939), which has many file packed into UPDATE.APP.
I have unpacked it, but the file name and extensions are unknown.
At present I am trying to identify the msimage.mbm and mprg files.
The rom link is http://www.needrom.com/wp-content/uploads/2015/03/C199s-V100R001C92B260-Telecom.zip
Shrihari007 said:
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Click to expand...
Click to collapse
ask for replace in customer care. as they told they will replace your mobile even after unlocking boot loader, root.
my device also gone hard bricked not get into the fastboot mode..
and no customer care no. to contact not correct > this one 18602122122
any help
thnks..
You guys can take a look at this thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Hit thanks to the creator and me if helped.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
What did you tell the customer support about your phone getting bricked.
I tried calling the support, but they said that they will chargers. 3000 for replacing .
please help
my device got bricked 2 days ago and now there is no fastboot mode and not even the led lights showing up if the device is connected to the pc!! and whats even worse the cc is not picking up the calls
my mobile also hard bricked.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
hi.... my yu yureka also get hard bricked after installing lollipop update from yu.. please tell me the steps you followed to replace your yureka...... please reply fast...
:crying::crying::crying:
issue regarding in functionality in yu yureka after upgrading with lpllipop
dear sir,
my name is anurag. i am using yureka ao 5510 phone after launching official update for phone i upgrade my phone.
i faced sevral problem after updating. the list are provided below.
1) overheating device than normal one while comparing with kitkat.
2) automatically turned off and un- responsive and on screen multicolor circle appeared wih cross over circle, its upto 5-6 hrs after that suddenly screen appeared after turning on mobile and start working.(in this process sevral times i remove battery & reinsert and trying to start it normally).
3) when phone connecting to wi-fi hotspot network (apple tablet over 3g) and i am trying to update apps from playstore its not updated(google play services unfortunately stopped) over wi fi network, but its working good on mobile data.
4) now currently issue in brightnesss control and in setting < storage option < USB computer connection the checkbox option are not apperared & phone not connected to computer(using windows 8.1 ),
please kindly fix this buges...
and provide some patch or system updates as earliar as possible to overcomethis issue.

[SOLVED]hard brick

I tried to flash mi 5x rom on A1 and it is in hard brick ... what to do now?
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
---------- Post added at 01:57 PM ---------- Previous post was at 01:38 PM ----------
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
Lol Lakshay already told ya on the group.It wouldn't have worked.
i cant boot to fastboot even
sooti said:
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
---------- Post added at 01:57 PM ---------- Previous post was at 01:38 PM ----------
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
Click to expand...
Click to collapse
..
...
i cant boot to fastboot mode
i m happy that the mi service center is just 3 min walk from my home and its in warranty!
pc isn"t detecting pls help @sooti can i do anything at home?
gulatilakshay said:
..
...
i cant boot to fastboot mode
i m happy that the mi service center is just 3 min walk from my home and its in warranty!
pc isn"t detecting pls help @sooti can i do anything at home?
Click to expand...
Click to collapse
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
sooti said:
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
Click to expand...
Click to collapse
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
sooti said:
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
Click to expand...
Click to collapse
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
gulatilakshay said:
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
Click to expand...
Click to collapse
dont let them know that you tried to flash MI 5X rom
just tell them that your phone died all of a sudden
if you tell them the truth you wont be getting anything but disappointment
Rawwr said:
dont let them know that you tried to flash MI 5X rom
just tell them that your phone died all of a sudden
if you tell them the truth you wont be getting anything but disappointment
Click to expand...
Click to collapse
thats what i m planning to do
and pls tell me whats edl mode
my pc is not detecting the phone but its vibrating as if trying to boot when i connect it to pc
gulatilakshay said:
thats what i m planning to do
and pls tell me whats edl mode
my pc is not detecting the phone but its vibrating as if trying to boot when i connect it to pc
Click to expand...
Click to collapse
dont even tell them that you're trying to connect to PC or anything about EDL mode
Rawwr said:
dont even tell them that you're trying to connect to PC or anything about EDL mode
Click to expand...
Click to collapse
got it ... i m gonna tell them it died all of a sudden.......
my friend says that he also hard bricked and he went to center and they flashed a new rom... thats all i m relieved... so i m just going to the service center now.... wish me luck .......i hope i will close the thread today @Rawwr @sooti
gulatilakshay said:
got it ... i m gonna tell them it died all of a sudden.......
my friend says that he also hard bricked and he went to center and they flashed a new rom... thats all i m relieved... so i m just going to the service center now.... wish me luck .......i hope i will close the thread today @Rawwr @sooti
Click to expand...
Click to collapse
good luck bro
I think Mi A1 not that difficult to get hard brick. Can you still get into fastboot? That day I try to re-lock bootloader with root lol. Also got bricked, appear as Qcom_USB_hulk something like that, but luckily still manage to get into fastboot.
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
gulatilakshay said:
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
Click to expand...
Click to collapse
that's great bro, but do not be afraid to root it again
because you learn from your mistakes
i once hardbricked my Mi3 and i brought it back to life by using sim connector's method
flashing custom roms since 2012 and trust me it is fun
you just need to follow the steps carefully
Rawwr said:
that's great bro, but do not be afraid to root it again
because you learn from your mistakes
i once hardbricked my Mi3 and i brought it back to life by using sim connector's method
flashing custom roms since 2012 and trust me it is fun
you just need to follow the steps carefully
Click to expand...
Click to collapse
I will wait till the kernel resources and stable twrp are released
Flashed all the rooms in my redmi 2 prime? and 3T
gulatilakshay said:
I will wait till the kernel resources and stable twrp are released
Flashed all the rooms in my redmi 2 prime and 3T
Click to expand...
Click to collapse
that's great and yes that's the best option as of now
gulatilakshay said:
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
Click to expand...
Click to collapse
What they have done?
jack_21 said:
What they have done?
Click to expand...
Click to collapse
yes even i want to know what did they do?

MI A1 Bricked HARD!!!-AlekDev

Hi Guys my MI A1 was bricked i just use the test point to fix and my pc recognized as Qualcomm 9008 so flashed latest 8.0 everything worked but wifi and bt was broken so i decided again to put in EDL and flash it with same firmware after that MI flash shows success but device doesn't turn it jsut keep blinking led and goes to EDL everytime i connect to PC...tried with Nougat and Oreo firmwares same...i checked logs and saysthat device is successfully flashed and rebooted...but nothing just black screen and blinking led..Can anyone Help me?I can't send to Service because i will need to wait 1 month also i opened the back cover so i lost the warranty.....:crying::crying:
Hi,
did you try to flash with qfil or only mi flash ?
I'm not sure but may you ask Cosmic Dan he was planing to do an unbrick guide and he mentioned files which you can use with qfil to unbrick your device. I don't know how far he is with it.
But if you did manage to unbrick so far and only BT and WiFi is your issue aren't there several fix guides for the persist partition ?
For my personal experience after I had to unbrick my old n6p I had the same issue after flashing. Phone stays black and led just blinking. Try to long pressing power, or other button combinations while plugg and unplugging USB to pc and I mean really long pressing the buttons. It sounds a bit weired but my n6p came back and booted as usual.
I'm sry, but I can't tell you the right combination because I tried so much that time, because it was my only phone.
Good luck !
Bro if You Have A Backup Of Your phone Then flash It.
Sent from my [device_name] using XDA-Developers Legacy app
Qfil doesn't work because we have A/B Partition Layout....i have backup of my partitions that's not issue....
How much battery had you left at flashing ? May its just drained and not able to boot. Sometimes it's the stupid and simple things. If you have partition backups you should be able to fix your WiFi and BT.
coremania said:
How much battery had you left at flashing ? May its just drained and not able to boot. Sometimes it's the stupid and simple things. If you have partition backups you should be able to fix your WiFi and BT.
Click to expand...
Click to collapse
70%
Alek Dev said:
Hi Guys i ws experimenting something with my device so i bricked fully i just use the test point to fix and my pc recognized as Qualcomm 9008 so flashed latest 8.0 everything worked but wifi and bt was broken so i decided again to put in EDL and flash it with same firmware after that MI flash shows success but device doesn't turn it jsut keep blinking led and goes to EDL everytime i connect to PC...tried with Nougat and Oreo firmwares same...i checked logs and saysthat device is successfully flashed and rebooted...but nothing just black screen and blinking led..Can anyone Help me?I can't send to Service because i will need to wait 1 month also i opened the back cover so i lost the warranty.....:crying::crying:
Click to expand...
Click to collapse
You can get it back. You have lost the Wifi and Bluetooth (Mac Address files). You can boot your phone if it is in edl mode. Just press the Power Button for more than 30-40 seconds. Your phone will boot. If possible, try to stick the back cover and show it to service center. They will change your phone's motherboard! They don't know about edl and everything! They only change internal parts! :good:
birarvindersingh said:
You can get it back. You have lost the Wifi and Bluetooth (Mac Address files). You can boot your phone if it is in edl mode. Just press the Power Button for more than 30-40 seconds. Your phone will boot. If possible, try to stick the back cover and show it to service center. They will change your phone's motherboard! They don't know about edl and everything! They only change internal parts! :good:
Click to expand...
Click to collapse
Yes Go service centre When Your phone in warrenty.
Sent from my [device_name] using XDA-Developers Legacy app
Try updating your drivers. Happened to me once, MiFlash didn't detect it, but driver MANUAL update helped.
If u r using Mac Then Try in windows with Fastboot Rom.
Phone sent to Service Center....hopefully they will repair with my warranty,So No releases/No Builds around 1 month
After lot of waiting (FROM 23 MAY) this is what i got from my service center
" AFTER SERVICE REVIEWS AND SOFTWARE INSTALATION DEVICE REMAINS WITH A LOADING / DAMAGED MEMORY CHIP"
"The phone is stuck in EDL Mode due to improper use and serious damage from all sides. The same after a service overview and software installation could not be turned on or raised (shows no signs). The service order states that if you want to service, you will be offered an offer to change the motherboard. Greeting"
After that they tell me this"
"Otherwise, changing the motherboard with a working hand would be around 182 USD. Greeting"
i don't have that money it's too much expensive for me so i'm without any phone....
Alek Dev said:
Qfil doesn't work because we have A/B Partition Layout....i have backup of my partitions that's not issue....
Click to expand...
Click to collapse
I restored my Mi A1 at least 3 times with QFIL, not a problem.
meltbanana said:
I restored my Mi A1 at least 3 times with QFIL, not a problem.
Click to expand...
Click to collapse
What version of QFIL? What OS did you have? what firmware did you use? or you have made backup with qfil then restore it? if you have that will be good to send me at least i can try it ....i ussually get this error dmssfail with QFIL.....ty
Alek Dev said:
What version of QFIL? What OS did you have? what firmware did you use? or you have made backup with qfil then restore it? if you have that will be good to send me at least i can try it ....i ussually get this error dmssfail with QFIL.....ty
Click to expand...
Click to collapse
Windows 10 Pro, QFIL latest (2.7 or so), I used the latest stock ROM (tissot_images_V9.5.11.0.ODHMIFA_8.0) provided by Xiaomi.
I can only recommend to extract a ROM to a path close to your volume root, for example D:\Temp\tissot_images_V9.5.11.0.ODHMIFA_8.0.
By using deeper paths you'll probably get errors. Flat build. :good:
meltbanana said:
Windows 10 Pro, QFIL latest (2.7 or so), I used the latest stock ROM (tissot_images_V9.5.11.0.ODHMIFA_8.0) provided by Xiaomi.
I can only recommend to extract a ROM to a path close to your volume root, for example D:\Temp\tissot_images_V9.5.11.0.ODHMIFA_8.0.
By using deeper paths you'll probably get errors. Flat build. :good:
Click to expand...
Click to collapse
Thanks when i get the phone back from my carrier i will try it and post here
@meltbanana What Drivers did you use? some link?
Alek Dev said:
@meltbanana What Drivers did you use? some link?
Click to expand...
Click to collapse
I used the drivers provided by QFIL. Btw. flashing a flat build by QFIL recreates the partition layout, it really doesn't care about two system partitions.
Flashed EDL mode when I went back from treblizing earlier without going back to stock partition layout in first place.
Qualcomm Flash Image Loader handled it flawlessly to restore the standard gpt provided by rawprogram0.xml .
meltbanana said:
I used the drivers provided by QFIL. Btw. flashing a flat build by QFIL recreates the partition layout, it really doesn't care about two system partitions.
Flashed EDL mode when I went back from treblizing earlier without going back to stock partition layout in first place.
Qualcomm Flash Image Loader handled it flawlessly to restore the standard gpt provided by rawprogram0.xml .
Click to expand...
Click to collapse
So it restores the partition layout right? Also can you provide me link of QFIL?
Alek Dev said:
So it restores the partition layout right? Also can you provide me link of QFIL?
Click to expand...
Click to collapse
true, it restores the default partition layout, please pick one, that's what I used: https://duckduckgo.com/?q=QPST_2.7.438.3&atb=v89-4_g&ia=web
and here's the ROM link provided by Xiaomi: http://bigota.d.miui.com/V9.5.11.0....0.ODHMIFA_20180504.0000.00_8.0_1a04581058.tgz

X720 TWRP 3.2.2.0 installed S20 Firmware reboot dead screen, only vibration response

Tried to update the Phone with the newest Firmware s20 and installing the newest aicp built. Because tried it before and getting zip 7 error...(cashes and evering else was cleared twice before :/)
After "Succesfull" flash the phone won't boot or show anything else than a black screen :/ maybe battery was to low? only thing i could recognize is a vibrating feedback if im holding down power and + for 10 seconds...
No chance seeing anything or finding my device through adb devices :/
Is the qfil method the only solution making it work again?
Thanks your responses already
Ordered an EDL cable too, but still no chance getting my device connected! Charging works but nothing else... :/ any suggestions?
visions84 said:
Ordered an EDL cable too, but still no chance getting my device connected! Charging works but nothing else... :/ any suggestions?
Click to expand...
Click to collapse
Tried qfil?
Quavosh said:
Tried qfil?
Click to expand...
Click to collapse
yes i did :/ installed the qualcom edl drivers... still no chance connecting the device with the PC! All other X720 working, and got the same updates and installations don't get it!
PS: All drivers Should work, i flashed without an edl cable the Le Max 2 X820!
You had to flash a wrong piece of software, or you have a hardware issue. Start by leaving the phone plugged in overnight.
This follow these instructions
https://forum.xda-developers.com/showpost.php?p=76100899&postcount=121
@visions84
Look for my post throughout the thread for additional help. I have unbricked 7 Leeco phones
tsongming said:
You had to flash a wrong piece of software, or you have a hardware issue. Start by leaving the phone plugged in overnight.
This follow these instructions
https://forum.xda-developers.com/showpost.php?p=76100899&postcount=121
@visions84
Look for my post throughout the thread for additional help. I have unbricked 7 Leeco phones
Click to expand...
Click to collapse
Thanks for your answer and tips, saw your posts already but tried it again and still the same problems don't get it, because flashed the same files on another x720 like i wrote above!
Still not possible to detect the device, adb edl mode everything without any response :/
Ordered another EDL Cable, because i'm not 100% sure mine works proper! Hope it will help me out I'll keep you up to date
Well was the EDL Cable, 2nd worked fine and phone is alive again! Thanks for your help, ideas and support!

Has my mi 9t hard bricked

I wrongly by mistake flashed Mi A1 rom
And then hit on system reboot in twrp recovery
Now My phone is neither rebooting not turning on nor in fastboot mode nor in twrp mode
If it is a hard brick please help me booting it :crying::crying::crying:
For real? Accidentally flashed ROM from different phone?
Probably just service with box to get it back to normal state
You mean I should go to service center?
Any fix here?!
ayazuddinkhan said:
You mean I should go to service center?
Any fix here?!
Click to expand...
Click to collapse
You need to open your phone and enable EDL mode, then you will need to pay a service (20/30 euros) to unbrick your phone via your PC (using TeamViewer remote control software).
Or try to use your warranty...
You messed up, what do you expect? Warranty, edl or local service with service box - every single one is paid
Try to get help on any 9t telegram groups
ayazuddinkhan said:
I wrongly by mistake flashed Mi A1 rom
And then hit on system reboot in twrp recovery
Now My phone is neither rebooting not turning on nor in fastboot mode nor in twrp mode
If it is a hard brick please help me booting it :crying::crying::crying:
Click to expand...
Click to collapse
Dear Friend I hope you have already managed to revive your phone, by now,
If not read my posthttps://forum.xda-developers.com/showpost.php?p=81536593
Fantomduck said:
Dear Friend I hope you have already managed to revive your phone, by now,
If not read my posthttps://forum.xda-developers.com/showpost.php?p=81536593
Click to expand...
Click to collapse
Yes Done thankyou
Fantomduck said:
Dear Friend I hope you have already managed to revive your phone, by now,
If not read my posthttps://forum.xda-developers.com/showpost.php?p=81536593
Click to expand...
Click to collapse
Dear friend, i have tried to use your method but despite the fact i can see my xiaomi in device manager as Qualcomm HS-USB QDLoader 9008, all in one tools cannot find it. Is there any solution for this?
ps: My screen is not turning on.
Thank you in advance
did u revive ur phone again .. or what ?
xD9 said:
Dear friend, i have tried to use your method but despite the fact i can see my xiaomi in device manager as Qualcomm HS-USB QDLoader 9008, all in one tools cannot find it. Is there any solution for this?
ps: My screen is not turning on.
Thank you in advance
Click to expand...
Click to collapse
do u fixed it .. if yes how

Categories

Resources