Related
If you wanna restock your Indian Honor 5X (kiw-l22) for warranty reasons, etc, this guide should, well, guide you!
This method works no matter which recovery or rom you're on. Data is wiped. So backup if you care about your data.
1) Download the following file and extract it.
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=76783
2) Copy the dload folder to your phone's external memory card.
3) Shut down your 5X and let it stay like that for 10-20 seconds.
4) Press and hold the volume up and down buttons and press the power button.
5) Let go of the power button once you feel the vibration while keeping the volume buttons pressed.
6) The device should enter Software Upgrade mode and the flashing should start automatically.
7) Let it flash and reboot twice.
8) You'll be back to 100% stock. :highfive:
PS : If anybody is kind enough to mirror the file, I'll be glad to add it to the OP.
Direct download link : India http://download-c.huawei.com/download/downloadCenter?downloadId=76783&version=289995&siteCode=in
For other channels :
http://download-c.huawei.com/download/downloadCenter?downloadId=76524&version=286788&siteCode=in
This will be handy when an update is arriving
Thanks You. my phone was getting slow with all the custom roms and debloats. got back to stock and applied the B140 Update.
abehrani said:
Thanks You. my phone was getting slow with all the custom roms and debloats. got back to stock and applied the B140 Update.
Click to expand...
Click to collapse
Oh really ? Just on Stock + Root din't it work charm removing bloatware ?? Only three were on for our devices -Bliss, Cm13.0, 12.1
kartrikpal said:
Oh really ? Just on Stock + Root din't it work charm removing bloatware ?? Only three were on for our devices -Bliss, Cm13.0, 12.1
Click to expand...
Click to collapse
Well for me yes it worked !!
I flashed stock B130 then updated to B150 . Then twrp, root , debloat script and root app remover. Phone finally working the way It was before. I will flash cm 13 or 12.1 after finger print sensor working on CM.
abehrani said:
Well for me yes it worked !!
I flashed stock B130 then updated to B150 . Then twrp, root , debloat script and root app remover. Phone finally working the way It was before. I will flash cm 13 or 12.1 after finger print sensor working on CM.
Click to expand...
Click to collapse
Even i'm waiting for it, i tried porting fingerprint sensor - flashed it did not work either.
Hello,
Do you think I can use this rom on my L21 ?
Thanks
newic2001 said:
Hello,
Do you think I can use this rom on my L21 ?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c432b130-uk-revert-package-t3368480
CosmoDroid said:
http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c432b130-uk-revert-package-t3368480
Click to expand...
Click to collapse
Thank you
Flash 4 files boot system cyst recovery from b150 upgard but emui showing 2.0 plz help
abehrani said:
Well for me yes it worked !!
I flashed stock B130 then updated to B150 . Then twrp, root , debloat script and root app remover. Phone finally working the way It was before. I will flash cm 13 or 12.1 after finger print sensor working on CM.
Click to expand...
Click to collapse
Finger print sensor fixed in CM13, the build should be up soon. Here is the post from the forum:
http://forum.xda-developers.com/showpost.php?p=67317455&postcount=1142
Hi,
on KIWI-L22 (Indian)
I had enrolled for beta program previously, so installed b130 and updated to 6.0 MM beta. I didnt like it much, so I switched back to CM 13.0.
As Official MM 6.0 is out now, so I wanted to switch to stock.
Following the procedure mentioned in OP, I downloaded L22-B130 and tried to restore stock but it failed mentioning "wrong version".
then I downloaded the L22-B320 version
http://www.hihonor.com/in/support/details/?DOC_ID=83346
and follow the same procedure. "voila" I returned to stock MM 6.0.
My whole point in saying all this is once upgraded to MM, then you have to use the MM "update.app".
Many thanks to Cosmodroid for this post.
is this okay to do with TWRP recovery?
ruler01 said:
is this okay to do with TWRP recovery?
Click to expand...
Click to collapse
this post is old from July ..have you checked the forums for newer methods ?
Sent from my KIW-L22 using Tapatalk
Link doesn't exist
The link you are posted does not exist and it shows error. Please update the exact link.
CosmoDroid said:
If you wanna restock your Indian Honor 5X (kiw-l22) for warranty reasons, etc, this guide should, well, guide you!
This method works no matter which recovery or rom you're on. Data is wiped. So backup if you care about your data.
1) Download the following file and extract it.
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=76783
2) Copy the dload folder to your phone's external memory card.
3) Shut down your 5X and let it stay like that for 10-20 seconds.
4) Press and hold the volume up and down buttons and press the power button.
5) Let go of the power button once you feel the vibration while keeping the volume buttons pressed.
6) The device should enter Software Upgrade mode and the flashing should start automatically.
7) Let it flash and reboot twice.
8) You'll be back to 100% stock. :highfive:
PS : If anybody is kind enough to mirror the file, I'll be glad to add it to the OP.
Click to expand...
Click to collapse
You said, no matter which recovery you're on,
But I tried with twrp and incompatible stock recovery, shows "Software Install Failed".
What do you think about this? Please give me a as solution, I'm in bootloop.
Device: KIW-L22
Also tell me about the transfer package shown in the screenshot.
PLK-L01C432B190 (for B180): http://update.hicloud.com:8180/TDS/data/files/p3/s15/G939/g104/v51796/f1/full/update.zip
Just put the .zip file in your dload folder and do local update.
This update fixes issues related to icons and input methods and improves system security with the latest Google security patches. [Fixes] Fixed an issue where the Google input method can't be used when the system language is set to Serbian. Fixed an issue where the icon for the calendar downloaded from the Google Play Store and system calendar icon are the same. [Optimizations] Deleted the Huawei browser (with the Google browser remaining unchanged) for a better user experience. All user data from the Huawei browser, except for bookmarks, will be deleted. Bookmarks will be imported to the Google Chrome after you update your device. Improved device security with the latest Google security patches. Deleted quick sharing of application installation packages and images to ensure their legal use. [Update notes] 1. Before the update, make sure your phone has not been rooted. If you experience any issues during the update, please go to http://consumer.huawei.com/ or visit an authorized service center for assistance. 2. This update will not erase your personal data, but we recommend that you back up any important data before updating.
Click to expand...
Click to collapse
Hello,
Did you tried it ? 'Cause except for the security patch, i dont' think this update worth it, am i right ?
I think people who were in that version didn't got any update to B37x.
To my (limited) knowledge B180>B370 excluding betas.
in my case failed at 9% and I do not want to reset phone... staying at b180
Kikito94 said:
Hello,
Did you tried it ? 'Cause except for the security patch, i dont' think this update worth it, am i right ?
Click to expand...
Click to collapse
Yes, the screenshot taken from my phone
@zinko_pt I got B371 update notification 1.18 GB in size.
@Ing.King really strange, i did it without any issue.
By the way guys, I just released it. It's up to you, updating or not..
We who had only B371 couldn't either update. Where and when will we get B30?
Sent from my PLK-L01 using XDA-Developers mobile app
---------- Post added at 07:08 PM ---------- Previous post was at 06:44 PM ----------
Forget the comments
Sent from my PLK-L01 using XDA-Developers mobile app
memht said:
Yes, the screenshot taken from my phone
@zinko_pt I got B371 update notification 1.18 GB in size.
@Ing.King really strange, i did it without any issue.
By the way guys, I just released it. It's up to you, updating or not..
Click to expand...
Click to collapse
Well ? You made this release or it's an official one ?
Kikito94 said:
Well ? You made this release or it's an official one ?
Click to expand...
Click to collapse
Of course official :laugh: it's from hi-cloud servers. It means "I found it and shared it".
memht said:
Of course official :laugh: it's from hi-cloud servers. It means "I found it and shared it".
Click to expand...
Click to collapse
Hehe 'cause u said "i released"
Okay okay thank's for sharing
I will try it, maybe one day
Edit 1 : i decided to install it, so i removed su, put recovery stock back but error too, i don't think a miss something, keep trying...
Kikito94 said:
Hehe 'cause u said "i released"
Okay okay thank's for sharing
I will try it, maybe one day
Edit 1 : i decided to install it, so i removed su, put recovery stock back but error too, i don't think a miss something, keep trying...
Click to expand...
Click to collapse
Really soo weird, I installed it at once without facing any problem.
It doesn't need a clean B180 rom because I installed it over my usual rom. It wasn't clean.
Something must be wrong in somewhere... but where?
Back here again..
No good news, tried to instal via sd, same issue, fail at 6%
But, but, but there might be a reason, i flashed the sdk21 of xposed, and idk how to remove it.. maybe this is the cause of it....
When you installed, you had to : unroot & put the recovery back ? Or you where "clean"
I'll try tomorrow, with a rest head
Kikito94 said:
Back here again..
No good news, tried to instal via sd, same issue, fail at 6%
But, but, but there might be a reason, i flashed the sdk21 of xposed, and idk how to remove it.. maybe this is the cause of it....
When you installed, you had to : unroot & put the recovery back ? Or you where "clean"
I'll try tomorrow, with a rest head
Click to expand...
Click to collapse
Oh, when I was saying "not clean" I meant installed apps and my all data
And yes, my rom was clean if we consider root and recovery condition.
memht said:
Oh, when I was saying "not clean" I meant installed apps and my all data
And yes, my rom was clean if we consider root and recovery condition.
Click to expand...
Click to collapse
Hi,
Hmmm so maybe the xposed package.rar i've flashed made this error
Well, i'll try when i receive the H8
Or maybe i had to put the recovery of B100 instead of B180 :/
Edit 1 : When i check the local.prop, there is "ro.dual.sim.phone=false" or the PLK-L01 is a dual sim, so i don't understand ^^
Edit 2 : Flash with TWRP =
MD5's missing
coming from B180 stock /rooted /xposed.....
1.) i flashed all possible partitions i had extracted (HuaweiExtractor) from B180. (system; cust; boot; recovery)
2.) reboot
3.) i flashed full rom B180 from folder dload (vol up&down&power) to be sure to get really all parts of firmware!
4.) reboot
5.) local update b190.zip from folder dload
6.) reboot
7.) i flashed twrp rc3 with fastboot to recovery partition
8.) had rooted and installed xposed now
all works as expected! Now i am on B190.
at least i had to install some modifications to system again and recover my data partition (twrp)
all in all nearly 1 hour hard work!
non-toxic said:
coming from B180 stock /rooted /xposed.....
1.) i flashed all possible partitions i had extracted (HuaweiExtractor) from B180. (system; cust; boot; recovery)
2.) reboot
3.) i flashed full rom B180 from folder dload (vol up&down&power) to be sure to get really all parts of firmware!
4.) reboot
5.) local update b190.zip from folder dload
6.) reboot
7.) i flashed twrp rc3 with fastboot to recovery partition
8.) had rooted and installed xposed now
all works as expected! Now i am on B190.
at least i had to install some modifications to system again and recover my data partition (twrp)
all in all nearly 1 hour hard work!
Click to expand...
Click to collapse
Hi,
In fact you just cleaned up your B180 in order to instal the 190 ?
The "real" B180
Pure stock if i could say ? Sure, it will work, but i tried to install it without getting back to stock^^
uff 1 hour to achieve upgrade... pity that I have to do factory reset to make upgrade to b190, no root no open bootloader no changes to firmware despite all this I cannot upgrade normal way... very sad, bad job honor(huawei)
because i had made a backup of my apps and data with the HUAWEI backup app (update to version from PlayStore is necessary!) recovery was easy! Had to remove some blood ware and unused apps only!
then reinstalled PMplus; managed autostart and apps they should stay on if screen is off.
reinstalled my google account
all in all a little bit more than 1 hour like i told you
now i am on b190 rooted; xposed and xprivacy activ on; and of curse Viper4Android for better sound.
real easy!
Kikito94 said:
Hehe 'cause u said "i released"
Okay okay thank's for sharing
I will try it, maybe one day
Edit 1 : i decided to install it, so i removed su, put recovery stock back but error too, i don't think a miss something, keep trying...
Click to expand...
Click to collapse
How did you update it? if you were rooted then you have to flash img files manually first before doing a three button update.
DigiGoon said:
How did you update it? if you were rooted then you have to flash img files manually first before doing a three button update.
Click to expand...
Click to collapse
Hi,
I tried a lot a thing, but i prefer stay in B180 i got backup corrupted, i thought it was due to the switch version but no, so, tried via sd, internal, 3 buttons, after that an error occured, "recovery partition missing"
Well i've reset everything from B100 to get back to B180, after that, tried ota researching, but it only find the B371 doesn't matter ^^
Kikito94 said:
Hi,
I tried a lot a thing, but i prefer stay in B180 i got backup corrupted, i thought it was due to the switch version but no, so, tried via sd, internal, 3 buttons, after that an error occured, "recovery partition missing"
Well i've reset everything from B100 to get back to B180, after that, tried ota researching, but it only find the B371 doesn't matter ^^
Click to expand...
Click to collapse
Yes, as B371 is the latest one so they will push B371 only, now there are no incrementals. But I have put up a thread here, maybe sometime later I'll post the OTAs too.
Sent from my PLK-L01 using Tapatalk
So, I found the OTA update packages for the FRD-L14 to B320 (and B317)
I really wanted to update... but I'm not sure how.
I'm rooted, with TWRP and SuperSU installed, and it all works ok.
I didn't want to do any hard methods, scared of bricking it. Updating the OTA over SD card isn't working (can't even find the setting)
So what to do?
They are only OTA updates, not Full, so I can't just use dload method to load them up.
I would prefer to keep root, but if I have to reflash to stock, and then re-root, I can do that.
Any other methods I can use? Can anyone with a bit more knowledge help me out?
And of course, more than happy to share the OTA files, one is approximately 3gb (B317) and the other is about 300mb (B320)
Thanks
Unroot phone and flash stock recovery
Will that work? I tried doing that but the updater didn't find the update in the SD card. It told me there were no updates available.
SolarisSixth said:
Will that work? I tried doing that but the updater didn't find the update in the SD card. It told me there were no updates available.
Click to expand...
Click to collapse
what is you full model no ?
FRD-L14C???B???
chongns said:
what is you full model no ?
FRD-L14C???B???
Click to expand...
Click to collapse
L14C567B162
The update seemed to be the right one, whether it actually was or not, not completely sure.
SolarisSixth said:
L14C567B162
The update seemed to be the right one, whether it actually was or not, not completely sure.
Click to expand...
Click to collapse
you need to make sure the zip file you get are the right one.
since your have TWRP, just flash the update.zip and the update_hw_usa.zip Link without reboot in between.
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
fuyucn said:
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
Click to expand...
Click to collapse
Thanks, I appreciate the help.
I flashed the update.zip that I found, but it just bricked my phone, I had to flash an older version to get it working.
Would you be able to point me at the correct update.zip? I don't want to try flashing the same one, and having it fail.
chongns said:
you need to make sure the zip file you get are the right one.
since your have TWRP, just flash the update.zip and the update_hw_usa.zip Link without reboot in between.
Click to expand...
Click to collapse
I was pretty sure it was the right one, at least it seemed to be. Thanks for the hw_usa.zip file, could you point me towards the correct update.zip?
I flashed the one I had with twrp, but it seemed to fail, and caused a brick. So I wouldn't want to flash the same version, especially since it seemed to not work.
SolarisSixth said:
Thanks, I appreciate the help.
I flashed the update.zip that I found, but it just bricked my phone, I had to flash an older version to get it working.
Would you be able to point me at the correct update.zip? I don't want to try flashing the same one, and having it fail.
Click to expand...
Click to collapse
You need two roms:
http://update.hicloud.com:8180/TDS/...68/f1/full/hw/usa/update_data_full_hw_usa.zip
AND
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68368/f1/full/update.zip
Steps:
1. unlock, rooted and twrp
2. then twrp, install the usa.zip, dont reboot
3. flash update.zip (if some errs shows , just miss them.)
Also don't wipe data & cache
4. reboot, if you cannot show correct build num in 'About'
, just use the *#*#2846579#*#*, and use software upgrade to flash update.app from both usa.zip and update.zip.
5. Everything will woke
fuyucn said:
You need two roms:
http://update.hicloud.com:8180/TDS/...68/f1/full/hw/usa/update_data_full_hw_usa.zip
AND
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68368/f1/full/update.zip
Steps:
1. unlock, rooted and twrp
2. then twrp, install the usa.zip, dont reboot
3. flash update.zip (if some errs shows , just miss them.)
Also don't wipe data & cache
4. reboot, if you cannot show correct build num in 'About'
, just use the *#*#2846579#*#*, and use software upgrade to flash update.app from both usa.zip and update.zip.
5. Everything will woke
Click to expand...
Click to collapse
Thanks, gonna give it a try right now. Will report back with results.
I was missing the hw_usa.zip file. As an educational experience, what is that file?
SolarisSixth said:
Thanks, gonna give it a try right now. Will report back with results.
I was missing the hw_usa.zip file. As an educational experience, what is that file?
Click to expand...
Click to collapse
that is honor8's hardware code and support library of Android 7.x. You can understand it as hardware firmware for honor 8. and update.zip is system and software part. In order to make software part works, you need correct hardware firmware.
fuyucn said:
that is honor8's hardware code and support library of Android 7.x. You can understand it as hardware firmware for honor 8. and update.zip is system and software part. In order to make software part works, you need correct hardware firmware.
Click to expand...
Click to collapse
Ahh, that makes perfect sense. Thank you.
I had tried to update it via twrp before, and when that failed, just tried dload method, and neither one worked. I didn't have the hw_usa file.
I appreciate the help, and just running a backup before I go ahead and flash.
Thanks, it worked great! Any tips on how to re-root? I need the new SuperSU version, right?
fuyucn said:
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
Click to expand...
Click to collapse
Bluetooth is working fine for me on FRD-L14 on B320. That probably means you flashed the wrong file or an incorrect version.
dmband64 said:
Bluetooth is working fine for me on FRD-L14 on B320. That probably means you flashed the wrong file or an incorrect version.
Click to expand...
Click to collapse
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
SolarisSixth said:
Thanks, it worked great! Any tips on how to re-root? I need the new SuperSU version, right?
Click to expand...
Click to collapse
Currently, there is no way to re root and install twrp. there is a post:
http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
It shows how to install twrp on 7.0 and root. Not work for me, so i give up this part, just enjoy the original Emui 5
fuyucn said:
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
Click to expand...
Click to collapse
I updated through the charles app. I am not rooted with custom recovery. Here is a link to the thread that details how I did it, with the original firmware link for the version I'm on.
http://forum.xda-developers.com/showpost.php?p=70104907&postcount=233
fuyucn said:
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
Currently, there is no way to re root and install twrp. there is a post:
http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
It shows how to install twrp on 7.0 and root. Not work for me, so i give up this part, just enjoy the original Emui 5
Click to expand...
Click to collapse
Hmm, it seems to have worked for me, but I seem to be running into some issues. It might have failed for me too.
I HAVE to replace some of these default apps. Some of them are truly awful, not to mention I have to uninstall some.
dmband64 said:
I updated through the charles app. I am not rooted with custom recovery. Here is a link to the thread that details how I did it, with the original firmware link for the version I'm on.
http://forum.xda-developers.com/showpost.php?p=70104907&postcount=233
Click to expand...
Click to collapse
thanks, i will try it.
Which TWRP you used for the FRD-L14
I was installing TWRP and superuser and something failed. Now the phone soft resets and bounces between TWRP and Huawei eRecovery. Does anyone have a L29C567 firmware I can flash? I've done some searching and there doesn't seem to be any sources for the firmware yet. Just trying to get the phone working again.
I think I could use FunkyHuawei if they had the firmware but I don't believe they do yet.
Edit: Looks like I put this in the wrong sub forum, sorry
Please be patient. Soon enough it will be available.
JJBTEXAS said:
I was installing TWRP and superuser and something failed. Now the phone soft resets and bounces between TWRP and Huawei eRecovery. Does anyone have a L29C567 firmware I can flash? I've done some searching and there doesn't seem to be any sources for the firmware yet. Just trying to get the phone working again.
I think I could use FunkyHuawei if they had the firmware but I don't believe they do yet.
Edit: Looks like I put this in the wrong sub forum, sorry
Click to expand...
Click to collapse
When that happened to me I flashed the update_full_hw_spcseas.zip folder through dload (vol up + down + power) to get the phone booting again.
Try this guide,it will change ur region to Asia C636 but the phone will work 100%
You can rebrand later when official USA version is available.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page4
gm007 said:
Try this guide,it will change ur region to Asia C636 but the phone will work 100%
You can rebrand later when official USA version is available.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page4
Click to expand...
Click to collapse
Yes I did this last night but now I'm stuck on B110. When I tried to flash update_full_hw_spcseas.zip my update restore failed and I got stuck in the bootloop again. I was able to dload B110 again so the phone is running but not sure how to get to B136 or B138 or even B158.
JJBTEXAS said:
Yes I did this last night but now I'm stuck on B110. When I tried to flash update_full_hw_spcseas.zip my update restore failed and I got stuck in the bootloop again. I was able to dload B110 again so the phone is running but not sure how to get to B136 or B138.
Click to expand...
Click to collapse
Do you have all apps and themes installed or they are missing?
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.
gm007 said:
Do you have all apps and themes installed or they are missing?
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.
Click to expand...
Click to collapse
I lost all the google apps and the keyboard when I tried to updated from B110 to B136 using step 7 "flash hw_data" but got it all back when with dloading back to B110.
I'm trying the updater now and it seems to be updating to B158! will update.
Update worked and I'm now on B158 which is awesome! The only thing that's odd now is that my MEID is 000000000000. I'm not sure if that's a big deal.
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.
Click to expand...
Click to collapse
Any reason to use steps 5 - 9 instead of doing the update from B110?
JJBTEXAS said:
Update worked and I'm now on B158 which is awesome! The only thing that's odd now is that my MEID is 000000000000. I'm not sure if that's a big deal.
Any reason to use steps 5 - 9 instead of doing the update from B110?
Click to expand...
Click to collapse
Step 5 to 9 is to restore the Missing application and data i recommend do this steps again.
If you have boot loop boot to stock recovery and do factory reset.
gm007 said:
Step 5 to 9 is to restore the Missing application and data i recommend do this steps again.
If you have boot loop boot to stock recovery and do factory reset.
Click to expand...
Click to collapse
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.
JJBTEXAS said:
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.
Click to expand...
Click to collapse
Did you tried a factory reset from settings?
If that didn't restore ur meid than maybe you need to flash the public data zip,will give you link later.
JJBTEXAS said:
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.
Click to expand...
Click to collapse
sorry but can i ask if you have restore the oeminfo to c636?
eddmecha said:
sorry but can i ask if you have restore the oeminfo to c636?
Click to expand...
Click to collapse
Yes. I did the following:
* Unlock bootloader
* install twrp
1- restore oeminfo for C636 http://www.mediafire.com/?szws87sk7rrkqr6
2- download c636 offline firmware,and flash it from an sd card using 3 buttons method by dload folder. https://forum.xda-developers.com/mat...4/post70465883
3- factory reset from settings.
4-use system update to get the latest firmware.
Basically gm007's but skipping a few steps
The end result was a seemingly complete L29C636B158.
gm007 said:
Did you tried a factory reset from settings?
If that didn't restore ur meid than maybe you need to flash the public data zip,will give you link later.
Click to expand...
Click to collapse
Yes, I believe I did. Is there any reason for me to fix the meid?
JJBTEXAS said:
Yes, I believe I did. Is there any reason for me to fix the meid?
Click to expand...
Click to collapse
If everything is working fine no need, maybe later if you decide to rebrand to original usa version.
gm007 said:
If everything is working fine no need, maybe later if you decide to rebrand to original usa version.
Click to expand...
Click to collapse
That's what I was thinking. I might try another factory reset just to test it.
JJBTEXAS said:
That's what I was thinking. I might try another factory reset just to test it.
Click to expand...
Click to collapse
Could be cause u skiped step 5 there is a mismatch in system files.
The update you got via system update is a small update or full firmware?
gm007 said:
Could be cause u skiped step 5 there is a mismatch in system files.
The update you got via system update is a small update or full firmware?
Click to expand...
Click to collapse
Reset didn't solve it. I think the update was over 2gb so full firmware.
ajsmsg78 said:
When that happened to me I flashed the update_full_hw_spcseas.zip folder through dload (vol up + down + power) to get the phone booting again.
Click to expand...
Click to collapse
hi bro how do u manage that can u full explain ?
Sorry to resurrect the old thread but I am having the same problem with meid number all zeros. The phone seems to work fine except that I cannot get LTE or 4G on certain provider's. Mine is also the US version. What did you do to fix this issue?
Hi
After searching both xda and official huawei site i finally found the rollback package for FRD-L09 and FRD-L19.
Method is:
1. Download rollback package (73,32 mb) and firmware (1,75gb) from: http://www.hihonor.com/uk/support/search-result/index.html?keywords=Honor 8#filter-section
2. Unzip rollback package and copy dload folder and Update.app to phone (dload/update.app)
Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. Delete "old/small" update.app from dload folder on phone
4. Unzip firmware and copy the update.app to dload folder on phone
Turn off phone, wait 10 sec.. Turn on by phone PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
Now you have latest official Android 6.0
thank's
thank you, tomorrow morning i try
Did as you mentioned, but when I want to go back to MM the Updater says that the Package isn't available and stops at 12%. Could u pls help me.
I can confirm this works 100%. Followed the steps and I was back to Android 6. After setting up the phone I downloaded the OTA-update to 7.0. No problems at all, thank you very much for this small but very useful guide!!!
Hi guys,
I'm looking for a rollback method for the Asian model (FRD-L09C636) because a rollback package for this version doesn't seem to exist.
Has anyone tried to flash the MM firmware directly without the rollback package?
Thanks
eugeniots said:
Hi guys,
I'm looking for a rollback method for the Asian model (FRD-L09C636) because a rollback package for this version doesn't seem to exist.
Has anyone tried to flash the MM firmware directly without the rollback package?
Thanks
Click to expand...
Click to collapse
I was able to downgrade my Malaysia version Honor 8 Nougat (FRD-L09C636B380) back to Marshmallow (FRD-L09C636B130) according to this thread:
https://forum.xda-developers.com/showpost.php?p=70863098&postcount=6
The rollback package is probably usable for all FRD-L09 as I have done the downgrading.
This worked fine, thx very much
Greatbro.
ANy way to re-lock to re-lock the bootloader?
Rommco05 said:
Via fastboot or after downgrade
Click to expand...
Click to collapse
Probably downgrade. Looks like my camera hardware has died, fails on all custom roms and on restored emui5. So I need to return it.
Rommco05 said:
So install stock firmware and you will see if camera works. Which is your model?
Click to expand...
Click to collapse
Yes, that's what I did, I had a full TWRP backup of all partitions - restored them all, rebooted fine into the phone, but the camera had just disappeared, like it had been uninstalled. Used gallery to get to camera, and it fails to open.
FR-D09
Rommco05 said:
aha, that's because u make restore via twrp. I have same issue, u must install original full firmware
Click to expand...
Click to collapse
How did you install original firmware?
Did you lose TWRP etc? Have you fixed your camera? Are you now able to reflash custom ROMS again?
(Sorry for lots of questions)
Rommco05 said:
If u have still access to twrp flash this two zips
http://update.hicloud.com:8180/TDS/...5665/f1/full/hw/eu/update_data_full_hw_eu.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v75665/f1/full/update.zip
Yes u after this zips loos twrp but anytime u can flash back (if u have PC)
Yes camera was after fixed
Yes u can again flash custom ROM
It's ok
Click to expand...
Click to collapse
Thanks
Flash in any particular order?
Does it relock bootloader too, or just lose TWRP?
Rommco05 said:
I always flashing first region zip. No bootloader stay unlocked (but I see some situations when was misticaly relocked)
Click to expand...
Click to collapse
Thanks. going for it now. I assume I need to do all the emui updates before I got back to custom stuff?
Now stuck on the blue honor screen.
Rommco05 said:
Reboot to stock recovey and make factory reset, same like to twrp
Click to expand...
Click to collapse
Oooh.. After a bit of a wait, I'm back up and running!
Now to rattle though setup and test the camera.
OK, we're back up and running, EMUI 5.0, camera working.
If I could find a way to disable the batterch charging light, I'd happily stay on stock!
Thanks for your help, Rommco05
Rommco05 said:
Yes! Maybe some app from Play store can do that. No problem
Click to expand...
Click to collapse
Tried them all! Cant get Lightflow to control the LED at all, Led Manager controls notifications, but doesn't turn off charging LED.
Rommco05 said:
About this I don't know. Why u want turn off charging LED?
Click to expand...
Click to collapse
Because it annoys me next to my bed, and if I'm in the car, and it's in the holder, I don;t want the led on all the time. LED=notification, not charging.
Which twrp is best under emui5
Rommco05 said:
Understand, but when u receive notification charging LED start blink. Latest by OpenKirin Team
---------- Post added at 04:00 PM ---------- Previous post was at 03:59 PM ----------
U receive latest updates? (EMUI)
Click to expand...
Click to collapse
its trying to install updates now. got to 77% and hung.
charging LED not an issue in custom roms (LOS,RR etc), can be turned off.