Related
I flashed back to Stock Sprint from the RUU and then let the phone update to the MR update. I rooted and then did the pushed the recovery-RA-heroc-v1.2.3.img to the SD card and flashed it (at least I think so, it happened really fast). When I did "reboot recovery" it just powered down the phone and no reboot. In fact, I had to pull the battery to get it to boot normally. If I try to boot to recovery by holding the home key I just get stuck at the HTC splash screen.
Any help is appreciated.
I went through this SAME THING for 3 days when I first rooted my hero and it was driving me nuts! You may have a corrupt recovery img or just a bad root. I would download the recovery img again, and flash the Sprint RUU AGAIN and then root again. Basically start from scratch again . That is what worked for me. Every time I tried rebooting and getting to that screen where u can do a nandroid backup and flash from sd I could not for the life of me get to that screen, It would just power off and reboot and stay on the HTC screen. So try starting ALL OVER again I bet that it will work.
Thanks for the advice. I'm going to redownload everything and reflash with the RUU, reroot, and try the recovery image stuff again.
It's been a frustrating day.
I feel your pain man, I went through it for 3 days before someone told me to flash the Stock Sprint RUU. And at the time I didnt even know there was a stock sprint ruu,lol.
OK, redid RUU, rerooted, and reflashed recovery and now it's working.
Now I can go to bed!
BTW, thanks aaron130 for your moral support.
No problem. Glad you got it working!
i'm having a bit of trouble with this as well i cant flash back to the stock sprint firmware with the RUU exe file. it times out on waiting for bootloader and the phone will never reset. has anyone encountered this? i downloaded the RUU file three times and and tried two different computers. i'm just trying to get back to the stock ROM. someone help please?
Yes, Spunkzz. Download and install HTC Sync.
Spunkzz said:
i'm having a bit of trouble with this as well i cant flash back to the stock sprint firmware with the RUU exe file. it times out on waiting for bootloader and the phone will never reset. has anyone encountered this? i downloaded the RUU file three times and and tried two different computers. i'm just trying to get back to the stock ROM. someone help please?
Click to expand...
Click to collapse
Try doing it from fastboot. (Off the top of my head) With the phone powered off: hold volume down and then hit the power button. It should say if you want fastboot to hit volume up... press volume up. See if it will flash RUU that way. If not then check your device manager and see if it shows you are missing a driver for your phone.
Spunkzz said:
i'm having a bit of trouble with this as well i cant flash back to the stock sprint firmware with the RUU exe file. it times out on waiting for bootloader and the phone will never reset. has anyone encountered this? i downloaded the RUU file three times and and tried two different computers. i'm just trying to get back to the stock ROM. someone help please?
Click to expand...
Click to collapse
I saw a thread about this somewhere. I think it was the Sprint Community forums. Are you on Windows 7? If you are, you'll have to manually download and install the Vista drivers for the phone.
I'll find you a link to them if this is your problem.
arashed31 said:
I saw a thread about this somewhere. I think it was the Sprint Community forums. Are you on Windows 7? If you are, you'll have to manually download and install the Vista drivers for the phone.
I'll find you a link to them if this is your problem.
Click to expand...
Click to collapse
I'm using Win7 and all I had to do was install HTC Sync.
jonnythan said:
I'm using Win7 and all I had to do was install HTC Sync.
Click to expand...
Click to collapse
Really? I have Win7 x64 and it wouldn't install any drivers. The program installed but it would never recognize my phone and neither did the RUU. I had to download the Vista x64 drivers from somewhere and then the HTC Sync program and the RUU would work.
http://www.mydigitallife.info/2009/08/24/workaround-for-htc-hero-sync-problem-in-windows-7/
Here's what I did:
I got the 2.0.8 version off the site.
Installed in normally and let it error with a long dialoge that said something about not installing drivers.
Downloaded the drivers from the site and put them in the HTC Driver folder
Used device manager to manually install the drivers for "Android Device"
And it worked!!
as an update. i figured it out. i was using Fresh Rom 0.5d and for some reason that wasnt letting me run RUU exe file to get it back to the stock rom. i flashed modacos rom and then used the RUU and it worked fine. i'm now back to the stock rom. for some reason after a day something keeps my phone awake. i've been tryign to figure it out but cant seem to narrow it down.
arashed31 said:
Really? I have Win7 x64 and it wouldn't install any drivers. The program installed but it would never recognize my phone and neither did the RUU. I had to download the Vista x64 drivers from somewhere and then the HTC Sync program and the RUU would work.
http://www.mydigitallife.info/2009/08/24/workaround-for-htc-hero-sync-problem-in-windows-7/
Here's what I did:
I got the 2.0.8 version off the site.
Installed in normally and let it error with a long dialoge that said something about not installing drivers.
Downloaded the drivers from the site and put them in the HTC Driver folder
Used device manager to manually install the drivers for "Android Device"
And it worked!!
Click to expand...
Click to collapse
Ah, Win7 x64 and x32 are going to be different beasts when it comes to drivers. Great info for those running x64 though, thanks.
Hey there
Today I got a message that I could update my Yoga 2 Tablet via the System Updater, but it doesn't quite work.
First of all about the device:
Lenovo Yoga 2 Tablet 1050F
Running current version: YT-1050F_USR_S0000198_1504220313_WW21_ROW
New version I wanna update to: YT2-1050F_USR_S1000031_1506111400_WW52_ROW
The problem:
I can download the update and when I press the install button, the tablet reboots into recovery mode. The update process begins and reaches 100% pretty quickly. After some time, it says the update failed though.
What I tried so far:
Downloading and updating again, it didn't work.
Download and starting the update on my PC with Lenovo Smart Assistant, didn't work.
Change the country code with the easyimage.zip file and the ####6020# code. I changed it to de (which is my usual country code) and us, but both did not help with the software update.
So... I really do not have any knowledge about android and can't seem to find another clue what to do next. Maybe someone of you can help me with this issue.
bjorr said:
Hey there
Today I got a message that I could update my Yoga 2 Tablet via the System Updater, but it doesn't quite work.
First of all about the device:
Lenovo Yoga 2 Tablet 1050F
Running current version: YT-1050F_USR_S0000198_1504220313_WW21_ROW
New version I wanna update to: YT2-1050F_USR_S1000031_1506111400_WW52_ROW
The problem:
I can download the update and when I press the install button, the tablet reboots into recovery mode. The update process begins and reaches 100% pretty quickly. After some time, it says the update failed though.
What I tried so far:
Downloading and updating again, it didn't work.
Download and starting the update on my PC with Lenovo Smart Assistant, didn't work.
Change the country code with the easyimage.zip file and the ####6020# code. I changed it to de (which is my usual country code) and us, but both did not help with the software update.
So... I really do not have any knowledge about android and can't seem to find another clue what to do next. Maybe someone of you can help me with this issue.
Click to expand...
Click to collapse
I posted the same issue already within the root thread. My device is rooted and after the download it started to upgrade and after reaching 100% it says it failed. I even did a factory reset - but SuperSu stays present and no upgrade is possible. I do not want to flash it via flashify - as bricking might be possible with that methode.
Maybe anyone has an idea how to proceed!?
Thanks for the reply.
I forgot to mention, my tablet isn't rooted and I tried a factory reset aswell, but nothing worked.
/E: So if anyone has the same problem: The solution is to flash the tablet to stack rom with PhoneFlashTool and update it afterwards. No problems since.
I flashed to stock rom downloaded from Russian Site with Phoneflashtool and tried to update. Update went to 100% then "failed". Any ideas anyone?
bowyerv said:
I flashed to stock rom downloaded from Russian Site with Phoneflashtool and tried to update. Update went to 100% then "failed". Any ideas anyone?
Click to expand...
Click to collapse
You missed presumably one important step after flashing the original rom, changing the country code prior OTA - which was posted already in another thread:
If system update fails do the following:
1. Flash stock firmware
2. Optionally you can wipe user data (I never did that) from DROIDBOOT
3. Go to contacts manager. Create some dummy contact if list is empty.
4. Go to Search / Find Contacts and enter ####6020#. It will ask you to select country code (first two latin letters, ignore Chinese).
5. Select what you want, then reboot.
6. Go to System Update
7. Install OTA update
Thanks. Will give that a go.
/E After the above it now tells me that I already have the latest version at YT2-1050F_USR-S000198_1504220313_WW21_ROW and that there is no update. Surely they have not taken the update offline??!
/EE I used the Update.zip I had previously downloaded (when the update first failed).
Placed this on the SD card and installed it via the update tools.
Thank you for those who helped me
Is there any chance You can upload this update.zip file? Thanks
Link to Lollipop Update.zip for YT2-1050F
worek555 said:
Is there any chance You can upload this update.zip file? Thanks
Click to expand...
Click to collapse
The storage I use wont let me link to my uploaded file! I have provided you the link by PM
Exactly the same problem. The ####6020# not work. Before m'y tablette was rooted but now after flash with easyimage, the stock ROM is OK but no update. I'm verry disapointed. Can you help me?
Thanks
1050F. Update fails.
Hi people, new guy here. I got redirected by some friendly dude.
Anyway, I apparantly have the same problem. Device has never been rooted. Tried the update as is, tried after a factory reset, tried #### contact hocus pocus, did not try anything involving a PC since I don't have one with that still has Windows and I can't seem to figure out Wine dependencies on my Debian box.
So, yeah, I guess I'll call the 1 euro a minute Lenovo support desk now. :laugh:
Anyway, thanks for having me, I'm subscribed to the thread . If I find out something before you guys do I'll let you know, but by all means don't stay up for it.
AgentAmsterdam said:
Hi people, new guy here. I got redirected by some friendly dude.
Anyway, I apparantly have the same problem. Device has never been rooted. Tried the update as is, tried after a factory reset, tried #### contact hocus pocus, did not try anything involving a PC since I don't have one with that still has Windows and I can't seem to figure out Wine dependencies on my Debian box.
So, yeah, I guess I'll call the 1 euro a minute Lenovo support desk now. :laugh:
Anyway, thanks for having me, I'm subscribed to the thread . If I find out something before you guys do I'll let you know, but by all means don't stay up for it.
Click to expand...
Click to collapse
I run Arch on all my machines. I was able to use my virtualbox windoze 8.1 (It came on my laptop but never booted it... ) vm to use the intelphonetool. I flashed this stock rom here and then took the ota lollipop update. If you want to root this works in Linux.
BTW... temporary Windows vm's can be found here
Guichinga said:
I posted the same issue already within the root thread. My device is rooted and after the download it started to upgrade and after reaching 100% it says it failed. I even did a factory reset - but SuperSu stays present and no upgrade is possible. I do not want to flash it via flashify - as bricking might be possible with that methode.
Maybe anyone has an idea how to proceed!?
Click to expand...
Click to collapse
Guichinga said:
You missed presumably one important step after flashing the original rom, changing the country code prior OTA - which was posted already in another thread:
If system update fails do the following:
1. Flash stock firmware
2. Optionally you can wipe user data (I never did that) from DROIDBOOT
3. Go to contacts manager. Create some dummy contact if list is empty.
4. Go to Search / Find Contacts and enter ####6020#. It will ask you to select country code (first two latin letters, ignore Chinese).
5. Select what you want, then reboot.
6. Go to System Update
7. Install OTA update
Click to expand...
Click to collapse
workdowg said:
I run Arch on all my machines. I was able to use my virtualbox windoze 8.1 (It came on my laptop but never booted it... ) vm to use the intelphonetool. I flashed this stock rom here and then took the ota lollipop update. If you want to root this works in Linux.
BTW... temporary Windows vm's can be found here
Click to expand...
Click to collapse
i have same problem and i don`t know what can i do
semsem81 said:
i have same problem and i don`t know what can i do
Click to expand...
Click to collapse
I don't know which problem you have...
Rooted and go back to stock to take OTA?
Return to stock KK firmware - Yoga Tablet 2 1050F
1) Download - This - AFH - kitkat-YT2-1050F_S0198_150422_ROW.7z
2) Extract the zipfile to a directory on PC somewhere
3) Goto "tools" folder and install the exe's in this order
__a)PhoneFlashTool_4.4.4.1_external_win32.exe
__b)iSocUSB-Driver-Setup-1.2.0.exe
__c)IntelAndroidDrvSetup1.5.0.exe
4) Start PhoneFlashTool and select settings (Upper left corner)
5) Tick "force sparcing" and change size to 500mb
6) Power off tablet and connect with usb
7) From off, hold volume up and power until tablet vibrates and release power (still holding volume up)
8) Tablet should now be in "Droidboot" and PhoneFlashTool should list it on the top
9) In PhoneFlashTool click browse and select flash.xml from the "target_bin" folder
10) WAIT!!! until you see "Result okay" on tablet AND "Flash Sucess" in PhoneFlashTool
11) Reboot
12) When Android starts skip all dialogs (tablet is going to factory reset anyway)
13) Select Contacts from desktop and make 1 dummy contact
14) In the search bar type "####6020#" and then select your country
15) Tablet reboots and you are on stock KitKat again and should receive an update notice for Lollipop
Click to expand...
Click to collapse
Stuck on bios after FAILED Lollipop to Kitkat downgrade?
Repair Lollipop to KitKat bios error
1) Get the firmware kitkat-YT2-1050F_S0198_150422_ROW.7z - https://www.androidfilehost.com/?fid=24052804347778640
2) Extract the firmware on PC
3) Download LtoKKxml.7z - https://www.androidfilehost.com/?fid=24052804347783496
4) Extract or copy the content of this zip to where you extracted the firmware, so that the flash_*.xml are located next to all the image files of the firmware
5) Edit the file flash-LtoKK_PVT_810.xml and remove the the "command" tags which contain "format data" and "erase data" (the XML tag from <command> to </command>)
6) Reboot your tablet into fastboot mode (hold power up, down and power buttons)and use PhoneFlashTool to flash this flash-LtoKK_PVT_810.xml
7) Wait for it to finish and when the tablet restarts make sure it goes back to fastboot. If not then power off and restart into fastboot
8) Flash the flash.xml which is located in the folder. This will flash all the KitKat firmware components. That's it.
Be careful if you do something wrong then a brick is very likely. Hope this helps
Originally posted by [email protected]
These are links to other variant firmwares (not my hosting):
830F: YT2-830F_S0195_150422_ROW.7z - https://cloud.mail.ru/public/Z2US9gd6f2ei/YT2-830F_S0195_150422_ROW.7z
830L: YT2-830L_S0209_150422_ROW.7z - https://cloud.mail.ru/public/2hrDmzneLDLY/YT2-830L_S0209_150422_ROW.7z
1050L YT2-1050L_S0225_150422_ROW.7z - https://cloud.mail.ru/public/2GFji3ub9JdG/YT2-1050L_S0225_150422_ROW.7z
1380L YT2 -1380L_S0216_150428_ROW.7z - https://cloud.mail.ru/public/CGZs/Nt8NE1pit
1380F YT2-1380F_S0219_150428_ROW.7z - https://cloud.mail.ru/public/8s5Q/dfuSXn7oi
Click to expand...
Click to collapse
Root Lollipop or Kitkat?
Root Lollipop or Kitkat on 1050F - 8/4/2015
Windows PC:
Thread by [email protected] - http://forum.xda-developers.com/showpost.php?p=57543871&postcount=1
Lollipop - Trigger 4
Kitkat - Trigger 3
Linux PC:
Thread by [email protected] - http://forum.xda-developers.com/showpost.php?p=61067755&postcount=1
Lollipop - Trigger 4
Kitkat - Trigger 3
Click to expand...
Click to collapse
workdowg
I don't know which problem you have...
My device is rooted and after the download it started to upgrade and after reaching 100% it says it failed. I even did a factory reset
i don't know how to flash firmware and i wanna to update to 5.0
my device is yoga tablet 2-1050L
Deleted. Will update
---------- Post added at 02:34 PM ---------- Previous post was at 02:30 PM ----------
semsem81 said:
workdowg
I don't know which problem you have...
My device is rooted and after the download it started to upgrade and after reaching 100% it says it failed. I even did a factory reset
i don't know how to flash firmware and i wanna to update to 5.0
my device is yoga tablet 2-1050L
Click to expand...
Click to collapse
I'll post files for you. You were able to root your device, so I'm sure you can handle flashing back to stock. I need to sleep right now before work.
Sent from my YOGA Tablet 2-1050F
workdowg said:
Deleted. Will update
---------- Post added at 02:34 PM ---------- Previous post was at 02:30 PM ----------
I'll post files for you. You were able to root your device, so I'm sure you can handle flashing back to stock. I need to sleep right now before work.
Sent from my YOGA Tablet 2-1050F
Click to expand...
Click to collapse
thx for ur replay but i don't have experience to flashing stock and i rooted my device with luck
so its okay you can go to sleep and sorry to bother you
Some info, probably well known, but have a question about it.
Hi,
I found a folder 'lenovoota' om my tablet. It contains a file called YT2-1050F_USR_S000198_1504220313_WW21_ROW_TO_YT2-1050F_USR_S100067_1507101258_WW52_ROW.zip
and one called packages.xml.
Both can't be opened / are corrupt. 0 bytes each.
So, correct me if I'm wrong, the update fails at download already, right? Would it be of any use to get these two files somewhere and replace the corrupted ones, then trigger the updating process again? Or is that a bit optimistic?
Thanks.
I'm a bit reluctant about the instructions above btw. I know what's what, but, you know, *very* old machine running debian, not sure how VM would perform. Apart from that I am certainly going to be overly focussed on getting the details right and brick my tablet by forgetting a whole major step or something. THanks anyway, though, appreciate the effort.
---------- Post added at 09:24 AM ---------- Previous post was at 09:17 AM ----------
AgentAmsterdam said:
Hi,
I found a folder 'lenovoota' om my tablet. It contains a file called YT2-1050F_USR_S000198_1504220313_WW21_ROW_TO_YT2-1050F_USR_S100067_1507101258_WW52_ROW.zip
and one called packages.xml.
Both can't be opened / are corrupt. 0 bytes each.
So, correct me if I'm wrong, the update fails at download already, right? Would it be of any use to get these two files somewhere and replace the corrupted ones, then trigger the updating process again? Or is that a bit optimistic?
Thanks.
I'm a bit reluctant about the instructions above btw. I know what's what, but, you know, *very* old machine running debian, not sure how VM would perform. Apart from that I am certainly going to be overly focussed on getting the details right and brick my tablet by forgetting a whole major step or something. THanks anyway, though, appreciate the effort.
Click to expand...
Click to collapse
EDIT: ah wait I think I get it, the row / version thing. I'll check my current version and see what the linux thread has to offer...
AgentAmsterdam said:
Hi,
I found a folder 'lenovoota' om my tablet. It contains a file called YT2-1050F_USR_S000198_1504220313_WW21_ROW_TO_YT2-1050F_USR_S100067_1507101258_WW52_ROW.zip
and one called packages.xml.
Both can't be opened / are corrupt. 0 bytes each.
So, correct me if I'm wrong, the update fails at download already, right? Would it be of any use to get these two files somewhere and replace the corrupted ones, then trigger the updating process again? Or is that a bit optimistic?
Thanks.
I'm a bit reluctant about the instructions above btw. I know what's what, but, you know, *very* old machine running debian, not sure how VM would perform. Apart from that I am certainly going to be overly focussed on getting the details right and brick my tablet by forgetting a whole major step or something. THanks anyway, though, appreciate the effort.
---------- Post added at 09:24 AM ---------- Previous post was at 09:17 AM ----------
EDIT: ah wait I think I get it, the row / version thing. I'll check my current version and see what the linux thread has to offer...
Click to expand...
Click to collapse
Yes, it shows as 0 bytes when it fails.
I captured the OTA file from the 1050F. It is usable only on a non-rooted stock device and those devices should take the OTA successfully anyway... But it had the files I needed to repair the bios error from trying to downgrade from Lollipop to KitKat.
And I feel your pain with using a VM. My laptop is pretty new and I have my OEM copy of Windows on an external SSD so it works good enough.
I tried to port the Linux version of the Intel Phone Tool to Arch and it fails because of Ubuntu specific depens. You could certainly try it. If you get it installed and it see's your tablet you should be good. Let me know if it works.
See this thread: http://forum.xda-developers.com/thinkpad-tablet/general/how-to-one-guide-yoga-tablet-2-t3174597
workdowg said:
Yes, it shows as 0 bytes when it fails.
I captured the OTA file from the 1050F. It is usable only on a non-rooted stock device and those devices should take the OTA successfully anyway...
Click to expand...
Click to collapse
Well, mine is unrooted and it still fails... Ill check out that thread.
Hi there
So, im here because i got problem with my Yoga 2 10" 1050L
Well, i was trying to update my Yoga to 5.0.1 but my tablet says that there is no update.
I was tryin to use Lenovo Smart Assistant - same, no update.
Then i do hard reset (power button + vol+), fresh install, and... kitkat do not recognize any new updates to lollipop.
Then i contact with Lenovo Poland, they was tryin to turn on update from servers for my device - nothing happens.
I got 2 devices, both from Poland, second one (i got two same Yogas, both 1050L) is running 5.0.1 without any problems (it update itself instantly after 1st boot).
So, what can i do now?! Is it any possibilities to get update *.zip file from anywhere, to do it manualy from settings menu in tablet?
Sorry for my bad english, its still not my main )
Hello guys, I noticed this morning that MM was officially released today. I followed the steps on to update my phone. I downloaded the rom for 551ml put it on my root of my internal storage, after that a pop up showed that there was a system update. I did the update and now my phone wont turn on now. It vibes twice and nothing comes on the screen. I have no idea how to fix it. I was on the latest firmware that system update would give me (184). If someone isn't busy could they possibly help me out. thx..
Same issue here, have you found a solution yet?
arturocr said:
Same issue here, have you found a solution yet?
Click to expand...
Click to collapse
tyring a guide atm but links seem to be outdated. I managed to get in fastboot or whatever its called when you can boot in to recovery. but from there I cant do anything.
You cant get into recovery after fastboot?
Sent from my ASUS_Z00AD using XDA Premium HD app
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Same for me...
baonxxx said:
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to do that in here but im forget where
Sorry my english are bad too..
miku1024 said:
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to to that in here but im forget where
Sorry my english are bad too..
Click to expand...
Click to collapse
how does make xfstk work ? don't have idea how. it just show nothing after i open xfstk , have a reference link ?
baonxxx said:
same problem ,
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
baonxxx said:
how does make xfstk work ? don't have idea how. it just show nothing after i open xfstk , have a reference link ?
Click to expand...
Click to collapse
I found the link!
You need You need asus usb and intel soc drivers
Heres
http://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840
Try this: http://forum.xda-developers.com/zenfone2/general/guide-how-to-update-to-official-mm-t3452082
miku1024 said:
I think mm system.img boot.img splashcreen.img need mm bootloder to run and at the moment twrp doesnt work with it, if you install mm via twrp you only updating these img and bootloader still lp that causes your phone cant boot. (Correct me if im wrong)
So now you need xfstk downloader to recover your fastboot and then flash .194 raw firmware using asus flash tool then adb sideload mm firmware from stock .194 recovery, theres guide how to do that in here but im forget where
Sorry my english are bad too..
Click to expand...
Click to collapse
I used XFSTK to upload firmware etc... but after upload firmware, the phone will vibrate twice and download of OS will not start... the soft will try 20 attemps to connect with the phone and the OS part can't be download on the phone... I'm stick at this point.
Hello guys, i'm trying to unbrick my phone, i'm following this guide http://forum.xda-developers.com/zenf...l-usb-t3405840 but when i get to the end of te install of intelSoC my device is detected as Moorefield for like 4-5 seconds and then it disappears. I've been trying to solve this for like 4 hours now, a little help would be much appreciated.
quarterbreed said:
tyring a guide atm but links seem to be outdated. I managed to get in fastboot or whatever its called when you can boot in to recovery. but from there I cant do anything.
Click to expand...
Click to collapse
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
glad to know that it worked. but sad to know that despite that you didn't hit thanks
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
If you don't need to use twrp everyday (maybe just a backup from time to time) you'd better keep stock recovery and whenever you need something from twrp, you just boot into it without flashing with the usual "fastboot boot twrp.img" command. That way if you ever upgrade again you don't have to remember whether you removed twrp before. But that's just an opinion, since if done that way, you'd need to have yor phione hooked to a computer to get into twrp, an that's not always possible.
thanks
quarterbreed said:
I did this morning and it worked. Im on 6.0.1 now, I guess the cause of my brick was that I had TWRP installed. Now I know next time to remove it before updating lol.
Click to expand...
Click to collapse
sukhwant717 said:
try this if you unable to flash
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
that link saved my phone, thanks man
sukhwant717 said:
glad to know that it worked. but sad to know that despite that you didn't hit thanks
Click to expand...
Click to collapse
I just hit thanks now, I was at my limit of 8 at the time.
I got the Yotaphone 2 from China, everything is so [email protected]#$ing buggy. When I unlock the phone, it goes to a blank white screen, when I go to google play, it get stuck on white screen. Constantly disconnecting from wifi, battery drains like crap. The charging light does not work anymore.
I tried to search on how to update the firmware, but I don't know what yota flasher is or where to get it.
Can someone just show me how to make it the phone just work and root.
I'm currently downloading 5.0.0-S01-003-RU1.0.1.44.zip
How do I flash it after downloading it?
Thanks.
kuromusha38 said:
I got the Yotaphone 2 from China, everything is so [email protected]#$ing buggy. When I unlock the phone, it goes to a blank white screen, when I go to google play, it get stuck on white screen. Constantly disconnecting from wifi, battery drains like crap. The charging light does not work anymore.
I tried to search on how to update the firmware, but I don't know what yota flasher is or where to get it.
Can someone just show me how to make it the phone just work and root.
I'm currently downloading 5.0.0-S01-003-RU1.0.1.44.zip
How do I flash it after downloading it?
Thanks.
Click to expand...
Click to collapse
Start by reading through this thread. It shoud contain all the information you need to flash your phone. http://forum.xda-developers.com/yotaphone-one/help/yotaphone-2-yd-206-china-flash-firmware-t3306797
In short what it comes down to is:
1) Download and install yotaflasher (ftp://fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/)
2) Install drivers from the yotaflasher driver/google folder
3) Connect your phone and put in download mode (keep holding power and volume down)
4) Run yotaflasher, it will download and install the firmware you choose
5) If stuck in bootloop after flashing check this forum on how to fix this
VirtuaLeech said:
Start by reading through this thread. It shoud contain all the information you need to flash your phone. http://forum.xda-developers.com/yotaphone-one/help/yotaphone-2-yd-206-china-flash-firmware-t3306797
2) Install drivers from the yotaflasher driver/google folder
Click to expand...
Click to collapse
2) what do you mean drivers? Did you mean firmware?
I have already downloaded the latest RU firmware, can I install it without downloading again from yotaflasher?
Also, will this give me root access?
I'm stuck on 31%. Any solutions.
kuromusha38 said:
2) what do you mean drivers? Did you mean firmware?
I have already downloaded the latest RU firmware, can I install it without downloading again from yotaflasher?
Also, will this give me root access?
Click to expand...
Click to collapse
You can install the drivers by navigating to the Yota Flasher folder (C:\Program Files (x86)\yotaphone_flasher) and below that go to the Driver\Google folder. There you will find an .INF file. Right click on the .INF file and click install.
It is easier to download the firmware again from within yotaflasher.
YotaFlasher is a standard tool provided by Yota and will not give you root access.
It sounds as if your retailer supplied firmware was bad. They use modified firmware, not original. That's why you can never do an OTA update and there are so many languages on the phone . But I imagine sometimes they mess up.
I'm always glad I know a little about phones/computers and can modify the firmware to standard.
I just bought a used sim unlocked HTC 10 Verizon off eBay yesterday, it was shipped with marshmallow firmware and I successfully managed to update it to the 7.0 nougat through htc sync manager, however after updating it to 7.0 sync manager shows that the phone is updated to the latest version and there aren't any further updates available, we all know that verizon released an 8.0 update as well for the htc 10. Also, I tried updating through OTA but whenever I press on check updates it says "Cannot connect, we had trouble checking for the system updates." Can anybody provide me with an SD card backup or anything so that I can update my phone to 8.0 officially without losing data? I just want to update it to 8.0 and nothing else, don't want to root it or anything. So far the device seems amazing.
Some information about my phone:
Model Number: HTC 6545LVW
Current Software Version: 2.41.605.36
whizinc said:
I just bought a used sim unlocked HTC 10 Verizon off eBay yesterday, it was shipped with marshmallow firmware and I successfully managed to update it to the 7.0 nougat through htc sync manager, however after updating it to 7.0 sync manager shows that the phone is updated to the latest version and there aren't any further updates available, we all know that verizon released an 8.0 update as well for the htc 10. Also, I tried updating through OTA but whenever I press on check updates it says "Cannot connect, we had trouble checking for the system updates." Can anybody provide me with an SD card backup or anything so that I can update my phone to 8.0 officially without losing data? I just want to update it to 8.0 and nothing else, don't want to root it or anything. So far the device seems amazing.
Some information about my phone:
Model Number: HTC 6545LVW
Current Software Version: 2.41.605.36
Click to expand...
Click to collapse
https://forum.xda-developers.com/verizon-htc-10/how-to/unlocked-htc-10-verizon-version-wont-t3843549
This will wipe your data though, unfortunately.
Tarima said:
https://forum.xda-developers.com/verizon-htc-10/how-to/unlocked-htc-10-verizon-version-wont-t3843549
This will wipe your data though, unfortunately.
Click to expand...
Click to collapse
Thanks a lot!! Just want to know one thing how can i flash it? through SD card backup or is the RUU which is an .exe file?
whizinc said:
Thanks a lot!! Just want to know one thing how can i flash it? through SD card backup or is the RUU which is an .exe file?
Click to expand...
Click to collapse
It's a zip file so you'll need to rename to 2PS6IMG.zip, put it on the root of your SD card and boot to download mode.
Tarima said:
It's a zip file so you'll need to rename to 2PS6IMG.zip, put it on the root of your SD card and boot to download mode.
Click to expand...
Click to collapse
im fairly new to HTC, this might sound like a noob question: Will it start updating itself as soon as I boot it in the download mode? P.S file being in the SD card on root
whizinc said:
im fairly new to HTC, this might sound like a noob question: Will it start updating itself as soon as I boot it in the download mode? P.S file being in the SD card on root
Click to expand...
Click to collapse
No but it will prompt you to flash it, as long as you named it properly.
Tarima said:
No but it will prompt you to flash it, as long as you named it properly.
Click to expand...
Click to collapse
i dont have an SD card at the moment, can i use internal memory?
whizinc said:
i dont have an SD card at the moment, can i use internal memory?
Click to expand...
Click to collapse
You can't. I think you can flash it using fastboot commands? I don't know how though. I saw @yldlj mention it, maybe he can help?
whizinc said:
i dont have an SD card at the moment, can i use internal memory?
Click to expand...
Click to collapse
You need to download htc_fastboot from HTC dev. I'm not sure the commands tho but im sure if you google it it will come up. Htc_fastboot allows flashing bigger files. Or just go to the shops today and get an SD card which is the easy way.
yldlj said:
You need to download htc_fastboot from HTC dev. I'm not sure the commands tho but im sure if you google it it will come up. Htc_fastboot allows flashing bigger files. Or just go to the shops today and get an SD card which is the easy way.
Click to expand...
Click to collapse
tried googling it, seems like a complex method. I'll get an SD card today to make things easier. Thanks a lot