Hi, good new ! Lineage OS is available for Mi5s + : (I will C/C)
Lineage-14.1-20170118-UNOFFICIAL-natrium
- Flashable ROM via TWRP-compatible ZIP for unlocked bootloader
- Based on xiaobai112220 on Mi5s rom
How To Install:
Flashing Instructions:
- 1st you must unlocked bootloader
- Install the TWRP Recovery. (by Vol Up+Power Button)
- Backup your current ROM using TWRP nandroid backup before
making any changes to your mobile. (Recommended )
- Download the ROM zip file from below link.
- Put the zip file in the sdcard.
- Go to recovery mode.
- Wipe cache, data, dalvik cache.
- Select Install Zip From SDCard and Flash Zip File.
- Reboot. First boot may takes several minutes.
lineage-14.1-20170118-UNOFFICIAL-natrium
work
Wifi
data + lte + 3g)
Gps
Storage ( enable to restore titanium backup)
Bluetooth
Some game work but still no sound
bugs
Camera
No led light on menu button
No sound
Fingerprint
DOWNLOAD
Lineage-14.1-20170118-UNOFFICIAL-natrium
Install Gapps
Gapps
Now, i hope we get the sources quickly, so we can have a stable version.
[email protected]
(Sorry for my english, but i'm french )
(I can't write link, so, go on Miui forum official for get link download)
Here's the link: https://drive.google.com/file/d/0BybzA4rRr2V5UlY3S2V4dXZSTGc/view
Android 6 or 7???
zaborek said:
Android 6 or 7???
Click to expand...
Click to collapse
7.1.1
Is this build related to the one made by @xiaobai112220 (https://forum.xda-developers.com/mi-5s/help/cm-to-support-mi5s-t3498417/post70609181#post70609181)
Is the same build!
this is for Mi5s Plus not Mi5s
good start keep going
Yes!
Finally, I can do some beta testing with it if needs be on my 128GB model.
THANK YOU!
Meh, we need the kernel sources for this to become even usable. Will flash once this is stable.
Thanks for the link
There are a new build, I'm downloading right now
https://www.androidfilehost.com/?fid=673368273298927053
fiskersc said:
There are a new build, I'm downloading right now
https://www.androidfilehost.com/?fid=673368273298927053
Click to expand...
Click to collapse
what is a new did u try it ..?
new?
anyone test its?
any changelog?
jack_luke said:
new?
anyone test its?
any changelog?
Click to expand...
Click to collapse
no sound, no finger sensor...
Is the same build based in capricorn for @xiaobai112220 with the new base from LineageOS:
Not work:
-Camera
-Finger Print
-External Sound
-In the initial setup, some cases the screen dosen't work well.
Work:
-Phone
-Data
-Wifi
-Sms
-Bluetooth
-Audio through Bluetooth
-Audio through headphones
-Smooth & Fast
fiskersc said:
Is the same build based in capricorn for @xiaobai112220 with the new base from LineageOS:
Not work:
-Camera
-Finger Print
-External Sound
-In the initial setup, some cases the screen dosen't work well.
Work:
-Phone
-Data
-Wifi
-Sms
-Bluetooth
-Audio through Bluetooth
-Audio through headphones
-Smooth & Fast
Click to expand...
Click to collapse
These problems are included in both versions?
-Lineage-14.1-20170118-UNOFFICIAL-natrium
-lineage-14.1-20170127-UNOFFICIAL-natrium
alberto8523 said:
These problems are included in both versions?
-Lineage-14.1-20170118-UNOFFICIAL-natrium
-lineage-14.1-20170127-UNOFFICIAL-natrium
Click to expand...
Click to collapse
All of them has got same problems
MI 5s Plus cihazımdan Tapatalk kullanılarak gönderildi
mi 5s plus
hello i got the camera working on the 5s plus by following this guide on page 34 look for the link by paranoia thank you so much for the https://forum.xda-developers.com/mi-5s/help/cm-to-support-mi5s-t3498417/page34 to get sound working i reflashed miui rooted it then copied the mixer paths all three of them to my storage then flashed lineage os copied all the mixer paths from miui into the system etc folder and now have fully functioning lineage os on the mi 5s plus
camera + sound fix
thanks
Amazing, the camera works well and the audio too
how is battery life???nothing about kernel sources? why they dont release yet? :/
Related
2012/08/22【ROM Release】【U8800 Pro】B876_KALO_Extreme (Porting Huawei Honor)
Hello Dear Community!
Today I decided to share my work, a customized rom based on the latest Gingerbread official ROM of the Huawei Honor U8860.
This porting wants to be the most light possible, avoiding the Huawei traces and trying to make difference with stability, speed and zero bugs.
This is a list of the rom features:
- Based on Gingerbread 2.3.6 – Official B876 (Firmware Huawei Honor U8860);
- Root permanent permission;
- Overclock kernel;
- Unlocked FPS limit (30 @ 55);
- Zipaligned apks;
- Added BusyBox;
- Removed Gallery 3D and replaced with QuickPic;
- Removed Huawei Launcher and replaced with Zeam Launcher;
- Corrected APNs list (only the Italian Internet Wind apn);
- Edited carrier name "Wind Telecomunicazioni Spa" into "WIND";
- Edited carrier name "Telecom Italia SpA" into "TIM";
- Edited carrier name "Hutchinson H3G Italia" into "3 ITA";
- Removed the stock Browser and replaced with Dolphin Browser HD;
- Updated Market (now Google Play), Google Search Box, FlashPlayer;
- Removed Social Huawei and other apks from the stock rom;
- Increased performance by editing build.prop;
- Enabled HDR function on camera;
- Removed File Browser and replaced with Root Explorer;
- Independence of the /cust partition;
- Removed WPS function on WiFi section;
- Removed ipcall function;
- Added the battery percentage on the status bar;
- Stock Android Gingerbread lockscreen;
- Removed the energy saving function;
- Bypass of the Android Settings Wizard;
- Optimized the GPS config for Europe;
- Tethering WiFi is available and works fine;
- Added by default the Quick Settings Widget in the notification bar;
- FM Radio works fine;
- Added function Volume Rocker Screen Wake Up;
- A new graphic for Contacts and Phone applications;
- Removed Fast Boot option;
- Patched the libsqlite.so for better performances;
- Disabled bugreports generation in kernel ramdisk;
- Permanent Root Access;
- No more is needed SuperUser.apk for root-based applications;
- The default video codec for High Video Recording Quality is H264;
- The default audio codec for High Video Recording Quality id AAC;
- Edited the carrier name "Sonaecom - Serviços de Comunicações, S.A." into "Optimus";
PREREQUISITES - ATTENTION PLEASE
a) ROM
Gingerbread 2.3.5 Stock Huawei version (B512, B521, B540, B552, B565, B572)
or any customized Gingerbread ROM (CyanogenMod, MIUI, 2.3.5, 2.3.6, 2.3.7)
or any ICS Rom (DZO Aurora, Genokolar MIUI v4);
b) Recovery
CWM Recovery 5.0.2.7
If you have the stock recovery, you will not be able to install any customized ROM. So, you have to do these steps: download the CWM Recovery 5.0.2.7 (previous link to download the file), power off your device and turn on into Pink Screen Mode (holding down VOL+, VOL- and Power button). Plug in your usb cable to your pc and wait for the automount of the new drive. Navigate to the /image folder and rename the stock "recovery.img" into "recovery.bak".
Now simply copy the CWM Recovery into the /image folder and be sure that its name is "recovery.img", otherwise you have to rename it into "recovery.img".
Unmount the periferic, remove the usb cable and extract the battery to shutdown the phone. That's all.
You can verify the new recovery installation entering in recovery mode (holding down VOL+ and Power button).
INSTALLATION PROCEDURE FOR FULL PACKAGE
0) Make sure that you have installed all prerequisites;
1) Download the zip file of the rom with your pc;
2) Shutdown your smartphone and to be really sure unplug the battery;
3) Insert your battery and power on your smartphone into recovery mode holding down VOL+ and the power button (be sure that you have the CWM 5.0.2.7);
4) Go to advanced ---> reboot recovery;
5) At the new recovery boot go to "mount and storage";
6) Mount usb storage;
7) Plug in your usb-microusb cable;
8) Copy the downloaded zip file into the external sdcard;
9) Wipe data/factory;
10) Wipe cache;
11) Wipe Dalvik Cache;
12) [OPTIONAL if you experience a huge battery drain only] Wipe Battery Stats;
13) Go to "mount and storage", then "format /system";
14) Install zip from sdcard;
15) choose zip from sdcard and select the downloaded zip file;
16) Install complete!
17) reboot system now.
Please wait about 2 minutes for the install process and be patient for the first boot.
At the first boot the default language has been set to English. This choise because the rom needs to be more international possible.
Anyway the rom is multilanguage and offers the default available languages of the stock Android base-rom.
The default keyboard is the stock Android Latin.
DOWNLOAD
Date: 2012/08/22
File name: B876_KALO_Extreme.zip
Changelog: Increased the 3G speed, fixed the network dropping from 2G/3G, updated applications.
If you appreciate my work and want to thank me, please send a donation, it's a huge reason to keep alive this Android project for U8800 Pro.
DONATE (PayPal)
FaceBook Group Page -----> KALO ANDROID U8800 Pro
Special thanks:
- Genokolar (kernel and recovery Guru);
- mik_os (libsqlite.so tweaks);
- pikachukaki (theme creator and tester for his B876 based-ROM);
- zontovolo (the best beta-tester I've seen!);
- cuvetto (for the better audio experience);
- merafly (for his advices and suggestions);
- tasosmrs (for the modded phone.apk)
- All users who are using/testing my releases;
SPECIAL THANKS TO DONATORS:
- Nektarios Orfanidis;
- Pavel Igorevich;
- Denis Avetsuk;
- Eugenio Livio;
- José Alexis Morera Fernández;
Happy flashing!
kalo86
At least a dev...good work m8...keep up this good work!!Can i suggest talking roms from anzhi and modify them like you wish to make them better??Keep up don't stop!
pikachukaki said:
At least a dev...good work m8...keep up this good work!!Can i suggest talking roms from anzhi and modify them like you wish to make them better??Keep up don't stop!
Click to expand...
Click to collapse
Thank you! I hope you try my rom, I repute it very very fast and stable.
I have tested B512, B540, B552, B565, B572, B866 (Honor porting), B872 (Honor porting), B876 (Honor porting).
I have always customed these official roms and I have to admitt that the latest B876 is the most powerfull, very stable and I am not finding bug at the moment.
I prefer to take the stock rom from the official Huawei zip and customize the content making a good working rom.
You are right, the anzhi forum is very rich of content, a lot of people upload roms daily.
Regards
kalo congratsulations,,,
first of all thank you, for trying to help me with cygwin kitchen the other days ,for cooking my rom but unfortunatelly my pc betrayed me...
i think that THIS IS the most serious work,,i've ever seen for our phones....
i hope with this work ,you make me leave my moddified 2.2.2 stock rom...
and a question,,by saying [Stock 2.6.35.7 kernel with default CPU frequencies...... you mean no o/c ??]
CONGRATS AGAIN
today you make me really happy
Hi gkalenis!
It's a pleasure for me to read your words and I really like to help people with my works. This rom makes you smartphone like a new one, but a better one!
Try it and enjoy yourself!
Thank you very much for your thanksgiving
Regards,
kalo86
i'll wait a little more (not to long )
and i hope to continue with developing ,,and not loose you
great ,great ,great
for sure ,you make my day
awesome ROM mate. Gonna try this. Thanks a lot
Sent from my U8800Pro using XDA
ics
great man. Can you please port the ICS from Honor? (stock like, only basic tweaks as hdr, overclocking, fps, root, init.d) Because the dzo's is not too stable.
thx mate
Any Review About This ROM?
---------- Post added at 12:24 PM ---------- Previous post was at 11:36 AM ----------
It Have Swype Keyboard?
What languages?
Anyway, great job!
husen4u said:
Any Review About This ROM?
---------- Post added at 12:24 PM ---------- Previous post was at 11:36 AM ----------
It Have Swype Keyboard?
Click to expand...
Click to collapse
It has the stock Android latin keyboard.
Filatov.p said:
What languages?
Click to expand...
Click to collapse
The rom is multi language, it has the default Android languages.
linomaniac said:
great man. Can you please port the ICS from Honor? (stock like, only basic tweaks as hdr, overclocking, fps, root, init.d) Because the dzo's is not too stable.
thx mate
Click to expand...
Click to collapse
Hi, at the moment ICS is not my "goal" because it is buggy (also for Huawei Honor). When time becomes mature I will port a good base from U8860.
In the meanwhile I hope to find better kernel sources, maybe specific for ICS, like 3.0.X kernels.
This is a full-working Gingerbread and it apperas bugless, it's ready for daily use.
Regards,
kalo86
kalo86 said:
In the meanwhile I hope to find better kernel sources, maybe specific for ICS, like 3.0.X kernels.
Click to expand...
Click to collapse
I like the way you're thinking. This is the right way to make a real ics rom.
fantastic! finally an italian dev! I've just installed rom and I already love it! I'll post my impressions about long use...
vispo60 said:
fantastic! finally an italian dev! I've just installed rom and I already love it! I'll post my impressions about long use...
Click to expand...
Click to collapse
Good then! I am not finding problems after 3 days no-stop ;-)
No missed calls;
No missed SMS;
WiFi, Bluetooth, GPS are working properly;
Always fluid and very fast.
B876 is a good base-rom!
kalo86 said:
...........
This is a full-working Gingerbread and it apperas bugless, it's ready for daily use.
Regards,
kalo86
Click to expand...
Click to collapse
hi, and what is with the "vanishing media files" bug? Is corrected on your rom?
linomaniac said:
hi, and what is with the "vanishing media files" bug? Is corrected on your rom?
Click to expand...
Click to collapse
Hi, what is this "vanishing media files" bug?
kalo86 said:
Hi, what is this "vanishing media files" bug?
Click to expand...
Click to collapse
for example:
http://epiccm.blogspot.com/2012/03/details-on-disappearing-sd-media-issue.html
it seems to be a brand-independent bug of android os.
I lost many many photos and videos.
I never had this bug, I'm sorry to hear your experience...
But I never had a similar problem.
Regards
Yes I Also Have This Automatically Photos And Videos Deleting Problem. I Am Using B512ROM Gonna Install Your ROM Tonight.
i dont develop this rom anymore, i sell the phone. Sorry. Anyway i post the almost working rom.
I manage to port android 7.1.1 for our device meizu m2 note
This is the list with what is working and what not:
Working:
-ril 4g/3g/2g
-wifi
-notification led works
-external sd
-is hardware accelerated
-gps
-dpi is 480
-mback button work (with vibrate)
-video playback (is fixed now no device freeze)
-sensors tnx to @manojzzz
-live display (night mode has lag) better to disable "settings\display"
-bluetooth
-hotspot
Not working
-camera
-flashlight
Changelog
beta1
-changed cyanogen to lineage
-fixed livedisplay
-fixed bluetooth
-fixed first boot need restart to get signal from your network
Alfa 3
-fixed sensors tnx to @manojzzz
-dpi set to 480
Alfa 2
-fixed video playback
-changed browser with cm browser
-few tweaks
-verry smooth user experience test and leave feedback
Alfa 1
-first release
How to install
-wipe cache, sistem, data, internal memory
-flash the rom
-flash gapps from opengapps.org pick arm64, android 7.1 and pico apps
-reboot
Use this mm recovery
MM Shev_T TWRP 3.0.2-2
I dont know if work in lp recovery, if any user testit in lp recovery tell me and i write here
Download link
Lineage 14.1 Meizu M2 Note beta1
android version: 7.1.1
build date: 15.01.2017
status: beta1
Great job!!
Keep up the good work :good:
Sent from my MEIZU M2Note using XDA Labs
:good: good work waiting to try
Waiting to try
Why don't you try to get in contact with the MAD team and build rom from source?...
Any way, congratulation for your work. Hope to see your final port as soon as possible. Untill then... "Un an nou fericit!"
Happy New Year!
Good job!!!
THX!
I Waiting
Seriously...!!! haha.. YOU ARE AWESOME..
Thanxs for your hardwork. Please intergrate volte feature in rom if you can. Again thanxs and happy new year:
navdeep001 said:
Thanxs for your hardwork. Please intergrate volte feature in rom if you can. Again thanxs and happy new year:
Click to expand...
Click to collapse
m2 note seems not support VoLTE on hardware...
---------- Post added at 06:09 AM ---------- Previous post was at 05:55 AM ----------
Could you tell me which phone you ported from? And I suggest compiled version would be more stable.
I think volte related to the software. Because some dailer app like jio4g voice are able to call on lte
Waiting to try, thx!
What you used as a base,or you compiled it from source?
Im trying to compile it from source,but i have some errors.
Im close to succeed,but i think im gonna have problems with camera.
Sent from my M2 Note using Tapatalk
first i try to port from jiayu s3+ but no sucess, and i manage to makeit work from vernee thor. im not good with this but with tutorials and some knowlege i ported the rom.
you guys wanna post the bugy rom?
adriano22 said:
first i try to port from jiayu s3+ but no sucess, and i manage to makeit work from vernee thor. im not good with this but with tutorials and some knowlege i ported the rom.
you guys wanna post the bugy rom?
Click to expand...
Click to collapse
You can post the link of rom . maybe someone can help us to fix the bug And I want try naugat 7.0 plz give the link.
I want to try my luck maybe I am able to fix the bug.
Sorry for bad english
Hello, the download link failure in the ROM hope you be able to share：：：胜利：
xueHon said:
Hello, the download link failure in the ROM hope you be able to share：：：胜利：
Click to expand...
Click to collapse
i delete the link i want to make few changes and after i upload again
The camera can be normal use?：
xueHon said:
The camera can be normal use?：
Click to expand...
Click to collapse
Camera doesnt work
So the transplantation of ROM, only MIUI8 camera can be normal use, now seems to be no better way to solve the camera can't use this bug.
Guys here you can get it new xXx NoLimits ROM for Oneplus 5T by xXx.
This ROM totally belongs to xXx
[ROM] xXx NoLimits 10.6 [OOS][OP5/5T] ☆ Speed/RAM optimized ☆ [5.1.1-OB09/07]
https://forum.xda-developers.com/showpost.php?p=72802213&postcount=2
About the ROM
OxygenOS based ROM for OnePlus 5T
Latest Open GApps versions already applied
Encrypted/Decrypted device support
☆
The base of this rom is very close to the original OnePlus OxygenOS.
This is not a commercial project but my hobby. I developed this ROM as my daily driver and I decided to share it with you. My focus is not at all on graphical mods, or achieving best battery life, but to get the best user experience in terms of speed, smoothness and max RAM usage for best multitasking. This is what you get.
☆
Major flash options
Magisk Root
SuperSU Root v2.82 SR5 (in Nougat only)
Encrypted/Decrypted device support
☆
xXx Tweaks
Windows Animation Scales
Disable Google Play Wakelocks
Modded Apps Detaching from Play Store
Viper4Android by ShadySquirrel
Stereo Speaker mod
Extreme Debloating
Individual Debloating
Debloat GApps down to Pico level
Busybox
SDcard Permission fix
Nova Launcher
Action Launcher
Pixel Launcher
Lawnchair Laucher
Android O Emojis
iOS11 Emojis
Emoji One
Samsung Emojis
AdAway
Exchange for Gmail
Different Boot Animations
Google Camera mod with HDR+.
[Nougat only] - OnePlus Oreo Camera
Google Dialer mod
Substratum Theme Engine
Substratum Theme Modules like Ozone & K-Klock
Unlimited Google Photos Storage Mod
iYTBP - modded YouTube app
Caffeine Tile
OmniSwitch
Google Live Wallpapers
Star Wars Theme from OP5T
Custom Kernel Selection
[Nougat only] - ARISE+Magnum+Opus
[Nougat only] - (mixed choice of Viper4Arise - Dolby Atmos - Dolby Digital Plus)
[Nougat only] - Xposed Framework by rovo89
[Nougat only] - Xposed Framework by Purify Team
☆
xXx System Tweaks
I added several tweaks on different levels to make the rom faster and snappy.
These tweaks also improve multitasking and maintain the system to be constantly fast.
6/8 GB RAM can hold a lot apps and services in the background. If you like apps to popup in virtual no time I recommend you to not close them when you change to another app but just put them to the background. Also, when speed is more important to you than window animations you can reduce the 3 Animation scale values in the developer options.
There are also several more features under the hood like:
Native Call Recording
WiFi channel bonding for the 2.4GHz frequency
ART Optimization
Detaching of modded apps
Dirty flash Survival mode for AKT, Substratum, Fonts and system media
SU & BusyBox Leftover Cleanup
Root support for Tasker
LMK Tweaks to use all RAM down to about 700MB left
some more…
Debloating
The rom is light debloated already and removes only apps which could be downloaded anytime later from Google Playstore
I also included a flash option to select Extreme Debloating. This will debloat the rom down close to a core Android level. You need to enable this option to take advantage of it.
The advantage is even more speed and battery saving as less unused apps and services are running or even more free RAM to hold your favorite apps in background.
The downside is that you might miss certain apps or functionality but definitely nothing what will make your android unstable.
Credits
@ahmed_radaideh - @amarullz - @ahmedradaideh - @A.R.I.S.E. Sound Systems - @Chainfire - @deletescape - @dustintinsley - @DVDandroid - @eng.stk - @guitardedhero - @Kickoff - @KpChuck - @laura almeida - @Lord Boeffla - @linuxct - @loserskater - @Master_T - @NevaX1 -
@purifyOS Team - @Mike1986 - @Mostafa Wael - @mrRobinson - @Mr.Yawnie - @osm0sis - @rovo89 - @rufus.wilson - @snowwolf725 - @topjohnwu - @ungeeked - @veez21 - @ZaneZam
Thank you
Link please..
wow nice.. link pls
nikz106 said:
Link please..
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-5/development/rom-xxx-nolimits-1-1-speed-ram-optimized-t3627121/post76091062#post76091062
After so many people asking for a 5T version of my xXx NoLimits Rom I was in a good mood yesterday and decided to provide a special Eastern Present.
From now on I will continue to support the 5T side by side with the OP5, but I'm not planning to maintain an extra 5T thread.
So I already fully integrated the 5T into my OP5 thread.
https://forum.xda-developers.com/on...xxx-nolimits-1-1-speed-ram-optimized-t3627121
You will find respective downloads in the download section on the first page side by side with the OP5 downloads and Infos.
As the device behaves more or less identical, I believe everything could be handled in the same OP5 thread. This will reduce my effort as I don't have to maintain an additional thread.
Enjoy the Rom :laugh:
Very nice. :fingers-crossed::fingers-crossed::fingers-crossed:
xXx said:
After so many people asking for a 5T version of my xXx NoLimits Rom I was in a good mood yesterday and decided to provide a special Eastern Present.
From now on I will continue to support the 5T side by side with the OP5, but I'm not planning to maintain an extra 5T thread.
So I already fully integrated the 5T into my OP5 thread.
https://forum.xda-developers.com/on...xxx-nolimits-1-1-speed-ram-optimized-t3627121
You will find respective downloads in the download section on the first page side by side with the OP5 downloads and Infos.
As the device behaves more or less identical, I believe everything could be handled in the same OP5 thread. This will reduce my effort as I don't have to maintain an additional thread.
Enjoy the Rom :laugh:
Click to expand...
Click to collapse
:highfive::highfive: Missed you from my 3T days glad to see it finally come to the 5T one of the most stable ROMS I used and also had the fastest updates after a new Beta would drop...This is a happy day lol
This rom is literally flying its actually faster than any phone out there know i think
Thanks for making this phone awesome!!!
how work both cameras? (Gcam and OOS cam)
In the OP of the xXx rom it's written that the Gcam is included with Slow Motion working
dariett said:
how work both cameras? (Gcam and OOS cam)
In the OP of the xXx rom it's written that the Gcam is included with Slow Motion working
Click to expand...
Click to collapse
i have to delete that statement. This was true some month ago. Currently, I believe there us no workaround to get slow-motion working with the gcam. But the OOS Camera can do it.
dariett said:
how work both cameras? (Gcam and OOS cam)
In the OP of the xXx rom it's written that the Gcam is included with Slow Motion working
Click to expand...
Click to collapse
Sorry with GCam slowmotion not working. Otherthings working well both cameras.
from OB5 I have bootloop in TWRP with a clean flash:
-Wipe cache, system and data,
-Install xXx
-Reboot in system and I have a bootloop in TWRP
I tried both TWRP, blu_spark and codeworkx.
I tried after the reboot in TWRP to wipe again cache and data (no format data) but it didn't work.
Does anyone happen to know if we will need to wipe userdata if you we flash this and then want to go back to a stable OOS build?
dariett said:
from OB5 I have bootloop in TWRP with a clean flash:
-Wipe cache, system and data,
-Install xXx
-Reboot in system and I have a bootloop in TWRP
I tried both TWRP, blu_spark and codeworkx.
I tried after the reboot in TWRP to wipe again cache and data (no format data) but it didn't work.
Click to expand...
Click to collapse
Format data/ reboot recovery/ 3 wipes / Flash rom/ no verity zip.
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
faz7 said:
Format data/ reboot recovery/ 3 wipes / Flash rom/ no verity zip.
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
Click to expand...
Click to collapse
I wanted to avoid the format data :laugh:
I will try again next week
dariett said:
I wanted to avoid the format data [emoji23]
I will try again next week
Click to expand...
Click to collapse
Me too. It's annoying
Enviado desde mi EVA-L09 mediante Tapatalk
Are the OB nav gestures in?
faz7 said:
Format data/ reboot recovery/ 3 wipes / Flash rom/ no verity zip.
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
Click to expand...
Click to collapse
Is this the process from stock rooted open beta 4 Encrypted but don't mind going decrypted ? Will I lose root? Thanks
1. Wipe
2. Advance wpe
3. Wipe Dalvik cache>Cache>data>system
4. Install OB5 firmware https://forum.xda-developers.com/showthread.php?t=3728665
5. Flash xXx Rom
6. no_verity_op5_v2
7. Wipe Dalvik/Cache
8. Reboot System
Enjoy
Xiaomi.EU 21.1.10 Android 10 Ported by Rashid Malyk
Device: Redmi 5 Plus
🗓 Build Date: 10/01/21
Build version: 21.1.10
MIUI version: 12.5
Android Version: 10.0 Q
🖥 Developed by: t.me/rashidmalyk
What's Working?
RIL
WiFi
Hotspot
Bluetooth
Stock Mi Radio
MI Sound Enhancer
MiCamera
Vibration
LED (offline charging LED)
CTS passed with Magisk
Auto Brightness
XiaomiParts and Tweaks
Goodix and FPC Fingerprint
and all MIUI features..!
Changes log:
1. Most important; the apps opening delay is finally fixed
2. The system ui and system apps opening delay is also fixed
3. Improved ram management
4. I can feel it, it would be smoothest build ever
5. You guys already know the changes of MIUI 12.5
6. Messaging app is so smooth now
Rest things are the same like previous ports
Bugs:
Switching FM to speaker isn't working, on headphone MI Radio is working
How to Install?
1. Unlock Bootloader
2. Install OrangeFox R11 Recovery
3. Wipe Cache, System, Vendor, Data Partitions (format internal storage is not necessary)
4. Flash ROM zip and Reboot to System
5. Magisk v20.3 and v21 are compatible (optional)
Donate me a Coffee
Paypal: https://paypal.me/rashidmalyk
Skrill: [email protected]
Download Link: (mirror links are also available, check YouTube video's description)
vince MIUI 12.5 Xiaomi.EU Q ROM by @RashidMalyk.zip
drive.google.com
ROM Review:
Note: You can join discussion group at Telegram t.me/vincePYA, for any query leave comment here and/or YouTube comments section or follow me at Telegram t.me/rashidmalyk
whats the fps on ppsspp tekken 6 running on default settings pleas share ill try it if its stable
ROM works very smooth. Fond no bugs so far.
foxmonter said:
ROM works very smooth. Fond no bugs so far.
Click to expand...
Click to collapse
Try playing any games or emulator like citra or ppsspp like tekken 6
samsungics1200 said:
Try playing any games or emulator like citra or ppsspp like tekken 6
Click to expand...
Click to collapse
Sorry i dont play games... is for work only...
HEY ! is best miui12 rom so far....
Thanks Rashid for your continuous efforts for keeping our device alive.
I'm on orangefox 10.0 stable, which recovery is recommended, because i have backups that i might need to restore in case something goes wrong and might want to revert to a working backup?
I'm using stock xiaomi.eu 10 stable. A8.1
Also which magisk version should we use?
Flashing procedure and / or prerequisites are missing from op..
Bi0haZarD said:
Thanks Rashid for your continuous efforts for keeping our device alive.
I'm on orangefox 10.0 stable, which recovery is recommended, because i have backups that i might need to restore in case something goes wrong and might want to revert to a working backup?
I'm using stock xiaomi.eu 10 stable. A8.1
Also which magisk version should we use?
Flashing procedure and / or prerequisites are missing from op..
Click to expand...
Click to collapse
Updated op now..! thanks
rashidmalyk said:
Updated op now..! thanks
Click to expand...
Click to collapse
Excellent work as always Rashid!!
I will find some time after work today, do the necessary preparations/backups and provide feedback on your marvelous work.
Your dedication and love for your work will pay off, I wish all the best for you and your family.
Best regards, and wish you a wonderful day
Hi,
It works like a charm!
Just a little issue for the wifi (Wifi disappears after the first connection) , i had to reset wifi settings to fix it.
Thank you very much rashidmalyk
Takezo90o said:
Hi,
It works like a charm!
Just a little issue for the wifi (Wifi disappears after the first connection) , i had to reset wifi settings to fix it.
Thank you very much rashidmalyk
Click to expand...
Click to collapse
The bug with the wifi is not a bug, it is caused by any router. Each time miui 12 connects to your router or any other router, changes the mac address of your wifi adapter for privacy reasons. You can set it to device default to avoid this issue.
Bi0haZarD
Great to know!
Takezo90o said:
Bi0haZarD
Great to know!
Click to expand...
Click to collapse
Glad to have helped! Enjoy
the quick setting to turn on the led flash by pressing the power button twice does not work.
Nice rom !!!
Nice miui 12 rom. I'm having some problems charging my phone, they are very slow. I came from Miui 11 stock using original xiaomi charger. With ampere open they barely hit 500mA but if I change to recovery mode they charge normally. Thank you for you time the rom is smooth!!
bro can you please guide me how to enable carrier video calling
i tried to edit with build prop but can't do it
even i disabled cam2 api
please help me
rashidmalyk said:
Xiaomi.EU 21.1.10 Android 10 Ported by Rashid Malyk
Device: Redmi 5 Plus
🗓 Build Date: 10/01/21
Build version: 21.1.10
MIUI version: 12.5
Android Version: 10.0 Q
🖥 Developed by: t.me/rashidmalyk
What's Working?
RIL
WiFi
Hotspot
Bluetooth
Stock Mi Radio
MI Sound Enhancer
MiCamera
Vibration
LED (offline charging LED)
CTS passed with Magisk
Auto Brightness
XiaomiParts and Tweaks
Goodix and FPC Fingerprint
and all MIUI features..!
Changes log:
1. Most important; the apps opening delay is finally fixed
2. The system ui and system apps opening delay is also fixed
3. Improved ram management
4. I can feel it, it would be smoothest build ever
5. You guys already know the changes of MIUI 12.5
6. Messaging app is so smooth now
Rest things are the same like previous ports
Bugs:
Switching FM to speaker isn't working, on headphone MI Radio is working
How to Install?
1. Unlock Bootloader
2. Install OrangeFox R11 Recovery
3. Wipe Cache, System, Vendor, Data Partitions (format internal storage is not necessary)
4. Flash ROM zip and Reboot to System
5. Magisk v20.3 and v21 are compatible (optional)
Donate me a Coffee
Paypal: https://paypal.me/rashidmalyk
Skrill: [email protected]
Download Link: (mirror links are also available, check YouTube video's description)
vince MIUI 12.5 Xiaomi.EU Q ROM by @RashidMalyk.zip
drive.google.com
ROM Review:
Note: You can join discussion group at Telegram t.me/vincePYA, for any query leave comment here and/or YouTube comments section or follow me at Telegram t.me/rashidmalyk
Click to expand...
Click to collapse
Hi Rashid,
Just flashed this rom with twrp 3.2 and procedure was completed as butter. But turned on phone, showing miui and said data is corrupted format phone. Idk its because of twrp or anything else. But it happened thrice today. Can you please help? Tried orangefox but even after typing correct password it's not decrypting my data. Hope you'll be able to help.
Regards
Ehsanur Rahman said:
Hi Rashid,
Just flashed this rom with twrp 3.2 and procedure was completed as butter. But turned on phone, showing miui and said data is corrupted format phone. Idk its because of twrp or anything else. But it happened thrice today. Can you please help? Tried orangefox but even after typing correct password it's not decrypting my data. Hope you'll be able to help.
Regards
Click to expand...
Click to collapse
Use orangefox 10.1 stable for encryption / decryption, orangefox 11 beta has bug with encryption / decryption.
If you can't decrypt with orangefox 10.1, you can FORMAT (not WIPE) internal memory to remove encryption.
And don't forget to BACKUP your important data.
Hi sir I am a problem with this rom
I can't copy 2 or 3 file from internal storage to otg flash my phone is hanging or speed copy is 0% freeze
And next problem in the WhatsApp not show my contact name just number show
Plz help me sir rashid dear.tanx
hello, and thanks for the job. I have a (bad) question: I read that it is advisable to use orange fox R11, can we use TWRP? (sorry for the bad english, i'm french speaking and use a translator) thank you in advance.
Olly706 said:
hello, and thanks for the job. I have a (bad) question: I read that it is advisable to use orange fox R11, can we use TWRP? (sorry for the bad english, i'm french speaking and use a translator) thank you in advance.
Click to expand...
Click to collapse
Better use Orangefox 10.1 stable. It is based off TWRP and doesn't have the issues the original TWRP had with Redmi 5 plus.
Orangefox 11 is beta and has bug with encryption / decryption..
Hello everyone!
This is a dotOS port from the Galaxy J3 2016 (made by @lucas000br) to the J2 2016.
Working:
My (basic) testings all seemed to work quite well
Added features and patched bugs:
Patched lock button in boot.img
Pre-rooted the ROM
Added FM-Radio from ViperOS (microG variant only)
Optimized features
Signature spoofing patched on microG variant
[See post #2 for further information]
Known problems:
Gapps variant is laggy (nothing I can do - Google sucks)
Your J2 shows up as a J3 (it's a port that's why)
Download links and installation instructions can be found in post #2
Credits:
Nanolx for Signature Spoofing
PixelBoot for base
lucas000br for modified base
Me for everything else
Obligatory Links:
Kernel Source: Github
Original Build (Abandoned by PixelBoot): XDA Developers (No source code)
Port of Port (by lucas000br): Thread seems to have disappeared?
Variant information (Which one is which?)
GAPPS: This one has most of the stock Google apps (Drive, YouTube, etc) + GSF present. Recommend for most users. RAM usage 640mb on idle
microG: All Google apps have been replaced with FOSS software. Google Services Framework has been replaced with microG. Signature spoofing is also present. RAM usage 560mb on idle
DIY: Want to build your own ROM? This one's for you! Everything except the bare minimum has been stripped out, so that you can decide what to pick for your ROM. (For power users only).
Stock dotOS: The stock dotOS compiled by PixelBoot for J3 2016; with Wi-Fi, Bluetooth, Signature spoofing and Power Button patched. Most stable out of all. You will need to flash additional GAPPS to get Google Services. RAM Usage 500mb.
Download Links:Stock dotOS (Recommended): MEGA
GAPPS: Oreo-Themed dotOS
microG: Oreo-Themed dotOS
DIY: Oreo-Themed dotOS
Installation Instructions:[If you don't have TWRP, get an image and install it from here]
GAPPS:
Boot to TWRP
[Do make sure to backup your data]
Wipe Dalvik, Data, System, Cache
Flash the ROM
Reboot. Done!
microG:
Boot to TWRP
[Do make sure to backup your data]
Wipe Dalvik, Data, System, Cache
Flash the ROM
After rebooting, open microG settings.
Go to self-check and tick the check boxes that are unticked (that will initialize microG)
Go back, and enable Device Registration, Cloud Messaging and Device Attestation
Then go to Location backends, and configure the DejaVu and Nominatim backends.
Done!
DIY and Stock dotOS will be the same as GAPPS variant
Changelog:
v1.2: Initial release06/05/2021: After lucas' comment, I realized that this wasn't the stock dotOS. So I have ported the stock dotOS created by PixelBoot. Try it out!
lucas000br said:
well done!
Also, PixelBoot did the DotOs base rom, i just modified it to be more like Android Oreo
(dont worry because i credited PixelBoot in the original j3 thread)
Click to expand...
Click to collapse
oops I need to credit him
Thanks for informing!
good soon try it out
i have flashed stock rom provided by u of dot os but my phone stuck at samsung logo pls look into it .....i am sure i have flashed it n follow all steps correctly
Uniqueshiva said:
i have flashed stock rom provided by u of dot os but my phone stuck at samsung logo pls look into it .....i am sure i have flashed it n follow all steps correctly
Click to expand...
Click to collapse
okay I'll try flashing it again. wait
NullCode said:
okay I'll try flashing it again. wait
Click to expand...
Click to collapse
btw i don't have stock rom installed before i flash it......I am on viper os....then i boot to twrp wipe sytem cache data n flash your provided dot os stock rom then i reboot but stuck at Samsung logo
@Uniqueshiva thank you for the information. I had made a typo in the updater script that caused the boot image to fail.
Please download the new ROM and flash it. I've confirmed it to work
NullCode said:
@Uniqueshiva thank you for the information. I had made a typo in the updater script that caused the boot image to fail.
Please download the new ROM and flash it. I've confirmed it to work
Click to expand...
Click to collapse
thx for responding so fast btw i will try it tomorrow as my data got finished today sorry for it...i will surely give feedback
edit- I tried stock dos os rom n flash arm 7.1 Pico gapps...boot animation appears but after sometimes black-brown screen appears after 5 min phone started but its written setup wizard failed i am not able to go ahead as setup wizard failed written every time so i turn off the phone maybe it can be the gapps problem now i will try dot os magisk gapps version provided by u btw i am curious that what is DIY dot os u give is all bugs fixed in it just asking..
Uniqueshiva said:
thx for responding so fast btw i will try it tomorrow as my data got finished today sorry for it...i will surely give feedback
edit- I tried stock dos os rom n flash arm 7.1 Pico gapps...boot animation appears but after sometimes black-brown screen appears after 5 min phone started but its written setup wizard failed i am not able to go ahead as setup wizard failed written every time so i turn off the phone maybe it can be the gapps problem now i will try dot os magisk gapps version provided by u btw i am curious that what is DIY dot os u give is all bugs fixed in it just asking..
Click to expand...
Click to collapse
hmm it could be flashing gapps causes problem with the rom...
yes try the gapps version i provided
the diy one is mainly for rom porters. it has many features removed so that rom porters can think about what features to add in the rom
only basic feature available in rom is phone and messaging support
I can't access internal storage after flashing. Stock file manager crashes if i open it. Stock browser says "no sd card, usb storage is required to download the file". There's no internal storage even after connecting the phone to pc. It only shows memory card.
Edit: Just wiped the internal storage and re-flashed it. Works fine now
Thanks for porting this amazing rom
@NullCode, thanks for your work for device j210f...I like the ui of dot os..but i must say your previous build i.e viper os was more stable n amazing atleast for me....btw thanks a lot for keeping this device alive...
Dark theme not working in settings and other apps.Any help?
shayara said:
Dark theme not working in settings and other apps.Any help?
Click to expand...
Click to collapse
there's a theming option in settings > display > scroll to the end
from there figure out what to do (I've confirmed its working)
Uniqueshiva said:
@NullCode, thanks for your work for device j210f...I like the ui of dot os..but i must say your previous build i.e viper os was more stable n amazing atleast for me....btw thanks a lot for keeping this device alive...
Click to expand...
Click to collapse
I know, viperOS was much more stable because I took 1 entire year to port and test the rom (i started testing January 2020 )
however, dotOS was ported in only 1 month
so it is not as polished
but im glad you liked it
NullCode said:
Hello everyone!
This is a dotOS port from the Galaxy J3 2016 (made by @lucas000br) to the J2 2016.
Working:
My (basic) testings all seemed to work quite well
Added features and patched bugs:
Patched lock button in boot.img
Pre-rooted the ROM
Added FM-Radio from ViperOS (microG variant only)
Optimized features
Signature spoofing patched on microG variant
[New] 2 more ROM options to choose from (with varying features)
[See post #2 for further information]
Known problems:
Gapps variant is laggy (nothing I can do - Google sucks)
Your J2 shows up as a J3 (it's a port that's why)
Download links and installation instructions can be found in post #2
Credits:
Nanolx for Signature Spoofing
PixelBoot for base
lucas000br for modified base
Me for everything else
Note: You might've noticed how I didn't put [PORT] in the thread title. It is mainly because this ROM varies from J3's dotOS so much, I don't think it is fair to call this one a port.
Click to expand...
Click to collapse
Hey.
I am using this ROM since 6th May (stock variant) and it is very great but has lots of bugs.
1. Bluetooth Audio stutters really bad (problem in every Android N rom for this phone)
2. Google Meet doesn't work (just shows the logo and then crashes) I am using Open GAPPS
3. Many system app crash randomly (sometimes even the launcher and system ui) requiring me to take out the battery and restarting the phone.
4. Camera quality is significantly bad compared to stock 6.0
But still a great project.
Thank you for keeping this phone updated.
NullCode said:
there's a theming option in settings > display > scroll to the end
from there figure out what to do (I've confirmed its working)
Click to expand...
Click to collapse
Okay.Thnx.
NullCode said:
I know, viperOS was much more stable because I took 1 entire year to port and test the rom (i started testing January 2020 )
however, dotOS was ported in only 1 month
so it is not as polished
but im glad you liked it
Click to expand...
Click to collapse
Omg 1 year......that's y it feels so smooth in viper os i get nearly 900 mb free ram with gapps again thanks for your hardwork.....I know that u may be bored now for working on j210f that is old device but still hoping for more
Uniqueshiva said:
Omg 1 year......that's y it feels so smooth in viper os i get nearly 900 mb free ram with gapps again thanks for your hardwork.....I know that u may be bored now for working on j210f that is old device but still hoping for more
Click to expand...
Click to collapse
My build has more free ram and battery btw.