Database Users

[Q] Soft-brick? ADB sees the phone.

Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.

Juxter said:
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Click to expand...
Click to collapse
Try again.
First refer to this thread:
dont see recovery and boot logo - http://forum.xda-developers.com/showthread.php?t=825173
And the original post by: Feuerbard
#22 - http://forum.xda-developers.com/showpost.php?p=9457010&postcount=22
Thumbs up solution to get logo
solution from 4PDA
flash first french firmware _hxxp://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz
(you must make kdz flasher fullscreen and change right option to CS_EMERGENCY)
dont boot android , remove accu reinsert them and press vol - and plug usb cable into port on mainboard - you must get in download mode )
flash firmware with fastboot (i use CIS _hxxp://narod.ru/disk/26675062000/V20B_00.kdz.html)
boot android and flash this firmware _hxxp://narod.ru/disk/25473801000/out.kdz.html
after this you must see all logo ( LG , Motion LG , Android )
after this flash firmware you like (custom fastboot e t с)
maybe some point is not needed but this tutorial work 100% and tested by myself
Click to expand...
Click to collapse
And the post by namco:
in post -- #45 - http://forum.xda-developers.com/showpost.php?p=10241289&postcount=45
namco said:
So after 4 5 6 or maybe 10 times, it will finally become working, that's what you're saying?
This is really odd, something's wrong with these phones lol
Okay, i'll load myself with a ton of patience and repeat the steps as per the instructions. This is *exactly* how i am doing it, with all the details:
1) Using the French v20A ROM - http://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz and this Russian one - http://narod.ru/disk/25473801000/out.kdz.html
2) Take out the battery, SIM card and SD card
3) While holding the Vol - button, plug USB into phone so that the phone goes into Download Mode
4) Run the KDZ Updater, put it into CS_Emergency mode
5) Select the French V20A rom and flash it
6) When it's finished (immediately after the DOWNLOAD MODE letters vanish), i pull out the USB plug from the PC, so that the phone doesn't boot.
7) Again hold Vol - and reinsert USB to put the phone back in Download Mode
8) In KDZ Updater (still in CS_Emergency mode) select out.kdz and flash it
9) Let the phone boot into Android
At this point i STILL don't have a boot animation, should i keep doing this until i see one appear?
When it (if) finally appears, i just flash my own ROM, do a factory reset and it should stay that way, correct?
I guess my impossibility to access recovery mode also has something to do with this...
Click to expand...
Click to collapse
Note: For above step: 1) Using the French v20A ROM
-- as long as you have the ROM of v20 with fastboot option, it doesn't really matter.
================
For out.kdz file alternate download link by fisher:
#59 - http://forum.xda-developers.com/showpost.php?p=10426771&postcount=59
Originally Posted by fishears
Try this:
http://www.mediafire.com/?u2mhgrbva8dr5cm
================
Hope this helps.

Thanks for the reply, I actually fixed it following this:
hxxp://modaco.com/topic/329863-how-to-raise-gt540-from-the-dead/
Once I got fastboot with that cwm.kdz I reflashed a fastboot rom, and from that one I could use the KDZ updater again, following the French kdz procedure...
The phone now is fully working recovery and bootanimations again

[Q] lg e400 starts in cwm

I rooted my phone long time ago, i saw i have an update to my software and i tried to install it. After my phone rebooted it starts in cwm recovery.
I tried to install cyanogen mod 9 with cwm and no result, i tried to do a factory reset ( it didn`t work) and my phone still oppened in cwm.. i don`t know what else to do :|

zeg685 said:
I rooted my phone long time ago, i saw i have an update to my software and i tried to install it. After my phone rebooted it starts in cwm recovery.
I tried to install cyanogen mod 9 with cwm and no result, i tried to do a factory reset ( it didn`t work) and my phone still oppened in cwm.. i don`t know what else to do :|
Click to expand...
Click to collapse
Unbrick your phone with KDZ offline flasher
Search in google how to unbrick lg l3
And follow the tutorials
If it doesnt work search for lg l3 original recovery and flash via adb
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
After that use kdz flash your firmware
Now your phone should be unbricked
Attention dont update your with lg update utility (ota updates) when u have cwm installed...this will brick your phone! When u want to update your phone use kdz to update in kdz choose mode 3gqct and diag for updating
---------- Post added at 01:49 PM ---------- Previous post was at 01:39 PM ----------
Go this way:
www.ninjaromeo.com/unbrick-lg-optimus-l3-e400-kdz/
If the first doesnt help use this:
mobilecon.info/restore-original-recovery-in-lg-optimus-l3.html

[Q] Hey, problem with my LG-G2 D802

Hey,
I've tried to flash my lg g2 d802 with CM 11 with TWRP recovery
after 5 minutes is says : "fail"
I selected reboot system the phone stuck on the lg logo and the phone won't boot
then I've wipe everything
tried to boot the phone the phone won't boot
then i read a thread on XDA : http://forum.xda-developers.com/showthread.php?t=2451696
via "terminal command" method and the phone won't boot
then I booted the phone into download mode and downloaded kdz file then i tried to use the flash-tool and I have the "lg drivers" and also "lg-mobile support tool"
then the flash-tool is not responding :/
so what i can do ?
and should I wait for kitkat official update or flash rom ?
and if I want to flash rom which one is better for lg g2 d802 ?

Well did you make a backup b4 you tried flashing the rom to restore it if anything were 2 go wrong ? Its most likely it flashed partially but it wiped your original rom thats why u couldnt boot . if you can still boot into recovery mode try flashing a diffrent rom if you have any downloaded

Hellfire and liquidsmooth are best 4.4 roms...
Try installing these roms..

[Q] LG G2 booting loop (soft brick?)

Hello,
I have LG G2 (d802 polish version) with 4.2 rooted stock rom, Installed pac rom two days ago and then (stupidly) changed build.prop ro.sf.lcd_density value from 480 to 240 and since then phone is bricked It's either booting forever (LG logo) or booting all the time to recovery mode( I have installed CWM recovery, and later Philz CWM). Now the good side is:
- I can get to download mode and connect to LG Flashtool. .When flashing the tot file BIN_LGD802AT-00-V10b-EUR-XX-SEP-07-2013-16G from XDA Storagecow.eu site, I can connec the phone via USb, change the port to 41 and it starts flashing. HOWEVER, when flashing the stock rom, LG flashtool skips all the partition and flashes it in seconds, then stops at 84 percent, tries to get factory reset,waits for it120 sec and then I have the error DOWNLOAD FAILS. What can be the problem here? Earlier I flashed the same bin file without any problems, and it didn't skipped through partitions , and everything went fine. WTF? Seriously maybe someone knows because I am desperate here. Already trying 2 days to figure it out. Haven't tried the KDZ method yet, because I have Windows 8,1 , and I am having permission errros while trying to flash. I will atttach a screenshot of LG flashtool skipping all the partitions whil flashing soon.
Please HELP!

clarification
In any case I am just asking why Lg Flash Tool is skipping all the partitions and flashin properly and then stopping at 84 and not restarting ? How can I flash back to stock? Any advice appreciated. thanks.

anyone can help?

Allrite bro..i oso facing a same problem with bootloop..i was at 4.2.2 stock rom with rooted and with twrp recovery too. After i update to ota 4.4 kitkat my g2 was bricked..its just boot with LG Logo and is was not boot up. Allrite. U can try to this tutorial. .pls doublecheck izzit u (flashing DLL) file was correct, and izzit its.match with firmware that u download? Pls.ensure tat..if that both file was correct and matching, is should be ok when u flashing. ..hope i can sharing to u. And sori about my Bad english..
Sent from my LG-D802 using xda premium

I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.

collller said:
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
Click to expand...
Click to collapse
Did you try to let LG Mobile Support Tool download and flash matching ROM file automatically? That worked for me when I was stuck in LG logo boot loop. In order to make Support Tool reflash ROM select menu Extra Featrues and then Reset Upgrade Error (or something like that - having tool in german here ) Of course phone must be in download mode and connected to PC.
Hope this helps

After kdz/tot flashing you might have to reset the phone.
either:
Hold volume down + power, wait for lg logo, release keys and hold them again (then proceed to factory reset)
OR
Hold volume down + power, wait for lg logo, release keys and hold volume up + volum down (then proceed to factory reset)

Did you solve this?

LG G2 Bootloop Bricked - No recovery or Download mode

Hi guys, I might need some help or a walk through here, I might have bricked my phone. I stump-rooted my phone ( 4.4.2) and installed TWRP Recovery 2.8.1 initially , Installing SuperSU which patched my sdcard and rebooted causing my phone to get stuck in a boot loop giving me no access to download mode, just recovery. From there I tried to install Cynogen mod 12 in TWRP recovery to fix the bootloop but any attempt at flashing gave me an error "error executing updater binary in zip." So I extracted the folders and flashed the 2.7.0 recovery.img which sayed it worked but now my phone is still stuck in boot loop, no download mode and when I try to enter recovery I get stuck in fastboot mode with port change errors. I took some screenshots so it would be easier to help me out. Every time I plug in the USB I get the following errors, the screenshot is from continuous attempts
I have the mini sdk installed and Koush drivers. Device manager does not recognize my phone anymore but it does come up under Fastboot Interface
Any Help would be greatly Appreciated
Because I'm a new member I can't post screenshots so just add an h infront of the links.
Thanks in advance for all your help
ttp://i.imgur.com/mHcOYOL.jpg
ttp://i.imgur.com/WxZNNzi.png

Take a fresh KDZ for your model and flash it via LG FlashTool

wisefreakz said:
Take a fresh KDZ for your model and flash it via LG FlashTool
Click to expand...
Click to collapse
Can you please explain how to do that WITHOUT entering download mode?

Maybe LG Flash recognizes your phone and will do the job.

LG Flash does not recognize my phone at all. http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 Do you think this method will work?