Related
Hi guys,
I hope anybody can help me. I'm looking for the latest firmware for my yoga tablet 2 1050L.
It should be YT2-1050L_USR_S100255_1601131716_WW52_ROW. At least that is what the OTA message shows me on my tablet.
After softbricking my tablet (was stuck in lenovo boot logo) when I installed this OTA update (162MB), I was able to recover it with firmware S100192. I checked also for country code and set it new. When I now try to install the OTA update I get an error and can only boot the tablet again and it wants me again to update to the S100255 firmware.
I also looked in the russion lenovo forum (you can translate with google into englsh or my case geman)
http://lenovo-forums.ru/forum/395-yoga-tablet-2-10-%D0%BF%D1%80%D0%BE%D1%88%D0%B8%D0%B2%D0%BA%D0%B8/
But there is the latest firmware I can download S100192.
So I would need either the S100255 firmware to flash it from stock or anybody can give me an hint in how to solve the udpate error
you cannot skip ota's, they are cummulative
ionioni said:
you cannot skip ota's, they are cummulative
Click to expand...
Click to collapse
Hi ionioni,
ok. what do you mean exactly? I don't want to skip it. I want to update it but it's showing error while the update process. and then when I am in Android again it wants me again to update to S100255. So I thought I could flash it with the latest stock rom S100255.
At the moment I try to flash an older stock rom like S100081 or S100225 (and then doing OTA hopefully) but whenever I try to flash it it boots into Android again when it should
C:\Program Files (x86)\Intel\Phone Flash Tool\fastboot.exe" "-S" "500M" "-s" "BaytrailABFF4CD2" "oem" "wipe" "ESP"` command
Iceball24 said:
Hi ionioni,
ok. what do you mean exactly? I don't want to skip it. I want to update it but it's showing error while the update process. and then when I am in Android again it wants me again to update to S100255. So I thought I could flash it with the latest stock rom S100255.
At the moment I try to flash an older stock rom like S100081 or S100225 (and then doing OTA hopefully) but whenever I try to flash it it boots into Android again when it should
C:\Program Files (x86)\Intel\Phone Flash Tool\fastboot.exe" "-S" "500M" "-s" "BaytrailABFF4CD2" "oem" "wipe" "ESP"` command
Click to expand...
Click to collapse
your initial message was a little ambiguos...
before flashing a stock rom go in Contacts and in the search contact box input ####0000# and tell me what he says under BIOS version
ionioni said:
your initial message was a little ambiguos...
before flashing a stock rom go in Contacts and in the search contact box input ####0000# and tell me what he says under BIOS version
Click to expand...
Click to collapse
OK.
Bios version: BLADE_21.X64.0005.R00.1504101447
Iceball24 said:
OK.
Bios version: BLADE_21.X64.0005.R00.1504101447
Click to expand...
Click to collapse
ok, you can flash a lollipop stock rom as you have the matching bios
first uninstall the Intel Phone Flash Tool you have now and install the one from here
then you can install using your stock lollipop rom if you have one or using this (if you download this flash it from DnX mode)
ionioni said:
ok, you can flash a lollipop stock rom as you have the matching bios
first uninstall the Intel Phone Flash Tool you have now and install the one from here
then you can install using your stock lollipop rom if you have one or using this (if you download this flash it from DnX mode)
Click to expand...
Click to collapse
ok, thx. I just downloaded it and try to flash it again. also set the Force fastboot sparsing to 500MB?
ionioni, I receive a crc error when unzipping the rom file....
Iceball24 said:
ok, thx. I just downloaded it and try to flash it again. also set the Force fastboot sparsing to 500MB?
Click to expand...
Click to collapse
if you use the rom i linked no need for additional settings (the sparse is in the xml already), just flash
---------- Post added at 16:19 ---------- Previous post was at 15:48 ----------
Iceball24 said:
ionioni, I receive a crc error when unzipping the rom file....
Click to expand...
Click to collapse
i just downloaded (i used the germany server as is closer to me and had some 10-12 MB/s) and it tested ok when unzipping
ionioni said:
if you use the rom i linked no need for additional settings (the sparse is in the xml already), just flash
---------- Post added at 16:19 ---------- Previous post was at 15:48 ----------
i just downloaded (i used the germany server as is closer to me and had some 10-12 MB/s) and it tested ok when unzipping
Click to expand...
Click to collapse
I downloaded it now from 3 servers and always get the CRC error. which program do you use? winrar. 7zip and which version?
Iceball24 said:
I downloaded it now from 3 servers and always get the CRC error. which program do you use? winrar. 7zip and which version?
Click to expand...
Click to collapse
the zip was made with winrar 5.xx (don't recall exactly the subversion)
ionioni said:
the zip was made with winrar 5.xx (don't recall exactly the subversion)
Click to expand...
Click to collapse
OK, I don't know why but it seems to be a problem within my office. I downloaded it at home and there I have no CRC issues.....
I will try to flash tomorrow than and hope it works. DnX mode is booting with both volume buttons into fastboot, right?
Iceball24 said:
OK, I don't know why but it seems to be a problem within my office. I downloaded it at home and there I have no CRC issues.....
I will try to flash tomorrow than and hope it works. DnX mode is booting with both volume buttons into fastboot, right?
Click to expand...
Click to collapse
yes, both vols pressed while powering on, screen will hang on 'fastboot starting...' message
ionioni said:
yes, both vols pressed while powering on, screen will hang on 'fastboot starting...' message
Click to expand...
Click to collapse
Ok, now I was finally (!) able to flash it and to boot it into android. Strange issue when I extracted your zip file on my HDDs on my company's notebook I got a zip CRC error. I unzipped it now directly on my USB drive (connected to my company laptop) to my external HDD and I had no issues. Only the devil knows why...???!
So after using your phone flash tool lite version 5.3.4.1 it worked now. I'm just downloading now the next OTA update over WLAN to version S100192. after that version S100255 should appear. let's see what happens Thank you so far.
Iceball24 said:
Ok, now I was finally (!) able to flash it and to boot it into android. Strange issue when I extracted your zip file on my HDDs on my company's notebook I got a zip CRC error. I unzipped it now directly on my USB drive (connected to my company laptop) to my external HDD and I had no issues. Only the devil knows why...???!
So after using your phone flash tool lite version 5.3.4.1 it worked now. I'm just downloading now the next OTA update over WLAN to version S100192. after that version S100255 should appear. let's see what happens Thank you so far.
Click to expand...
Click to collapse
maybe the hdd is near his EOL or maybe you have there some strange firewall? you should check as this sounds really odd
ionioni said:
maybe the hdd is near his EOL or maybe you have there some strange firewall? you should check as this sounds really odd
Click to expand...
Click to collapse
no don't think it's EOL as it was on both my harddisks and I have no problems with other files. Don't bother anymore.
Good news: was able to flash and update it OTA to the current Firmware S100256 (14MB) which has been released as there may have been some bugs to the S100255. and it works! Thank you very much! :silly::silly::good::good::good:
Hi Ionioni.
Sorry for bothering you, but I have same problem as Iceball24. Could you tell me what should be the settings for Phone Flash Tool to flash yoga properly?
Iceball24 said:
no don't think it's EOL as it was on both my harddisks and I have no problems with other files. Don't bother anymore.
Good news: was able to flash and update it OTA to the current Firmware S100256 (14MB) which has been released as there may have been some bugs to the S100255. and it works! Thank you very much! :silly::silly::good::good::good:
Click to expand...
Click to collapse
Good!
sanguine13 said:
Hi Ionioni.
Sorry for bothering you, but I have same problem as Iceball24. Could you tell me what should be the settings for Phone Flash Tool to flash yoga properly?
Click to expand...
Click to collapse
no settings
sanguine13 said:
Hi Ionioni.
Sorry for bothering you, but I have same problem as Iceball24. Could you tell me what should be the settings for Phone Flash Tool to flash yoga properly?
Click to expand...
Click to collapse
Maybe this can help you:
Make sure you use the latest Phone Flash tool (lite) which was 5.3.4.1 for me. Make sure you use a USB port at your laptop PC, don't use a hub (did not work for me). And If you are not able to flash it via the DnX mode (press both Volumen buttons and power on the tab) then try using the Fastboot mode in the bootloader (volume down and power on the tab).
Iceball24 said:
Maybe this can help you:
Make sure you use the latest Phone Flash tool (lite) which was 5.3.4.1 for me. Make sure you use a USB port at your laptop PC, don't use a hub (did not work for me). And If you are not able to flash it via the DnX mode (press both Volumen buttons and power on the tab) then try using the Fastboot mode in the bootloader (volume down and power on the tab).
Click to expand...
Click to collapse
Thank you.
Everything went very good. I downloaded linked Phone Tool and stock rom and flashed Yoga through Fastboot. Now my Yoga is updated
ionioni said:
Good!
no settings
Click to expand...
Click to collapse
Hi ionioni,
I'm back with a further problem. I just tried to start teamviewer on the yoga. I get an error that the firmware may be faulty and I should check for a proper IMEI. So I put in a SIM card (which I have used in anther phone) and I'm able to unlock it with the pin. But I get no data connection and also when I try to set a new PIN for the SIM card in the security settings I enter the PIN and it says wrong PIN I have 3 more trys. but I can try it as often as I want, it does not lock the SIM card.
So what may be the problem? any ideas?
UPDATE: Ok, just checked my IMEI online and it appears to be an IPHONE IMEI??
Update 2: Under settings, network, more, mobile connection (? just know the german word for the settings) I can not choose the menu as it is deactivated and grey. I just read that the tablet may think it is in flight mode?
Elephone P9000
Hi Guys I need your help urgently please with my elephone p9000
I am stuck really , I got this phone and tried to root it using kingo and now it is stock on the booting logo , I tried to follow your guide and no success!! can you help me how to flash it using adb method for example.
so far
1- phone boots up
2- getting stuck on the company logo while loading
3- tried flashing it using SP flash tool and downloaded the stock rom and still no success.
4- can you help me on how to flash it using the adb.
would appreciate a detailed step by step for beginners
Many thanks
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
willngg said:
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
Click to expand...
Click to collapse
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
a.cid said:
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
Click to expand...
Click to collapse
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
willngg said:
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
Click to expand...
Click to collapse
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
a.cid said:
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
Click to expand...
Click to collapse
version 80 cant get gravity box to work
does not work, scatter file gives issues
maestro2702 said:
does not work, scatter file gives issues
Click to expand...
Click to collapse
try to shorten scatter file name or place in C:/
use latest version of sp flash tools
https://androidmtk.com/smart-phone-flash-tool
download rom 20160419
https://mega.nz/#!3R0zBQAY!zkdYmMcYzps7p8gzUKVBYY9jjwNLgb6mnA9OGKRDY3E
Root using this tutorial
http://bbs.elephone.hk/thread-9919-1-1.html
Detailed instructions German (not the confused instruction of elephone.hk)
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Tried it, but it did not work. tried it multiple times, it states a succes. Download OK. But when i try to start TWRP by holding vol+ and power, or vol+ and vol- and power
it just starts normally, or it gets me to the factory settings.
snoopyminou said:
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Click to expand...
Click to collapse
also tried the drivers, and stuff from this page : https://elephonemobile.eu/t/how-to-root-latest-elephone-p9000-stock-rom/34
I have : Elephone_P9000_20160628 does this have to do with it ?
and i now tried a wireless update... to 20160715 but it says, it will restart in recovery mode to do the update, but then the phone keeps hanging on the ELEPHONE logo... so i can not update the phone anymore apparently... ( so something is done to the factory settings :s but not the TWRMP )
i'm gonna try now the scatt file from my firmware build that i downloaded here : http://www.android-hilfe.de/thema/o...-p9000-p9000-lite-uebersicht-download.785193/
did not work, but now i have the original recovery back on the device, and now i can do the wireless update to 20160715 so i now have latest version of my P9000 firmware... but now... still my main question how to root it that TWRP works
Help !!! i don't use the phone untill i can install xposed framework and Xprivacy on it
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
hozumi70 said:
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
Click to expand...
Click to collapse
Flash magisk via TWRP.
Hi.
I think my problem is unusual.
I try to install TWRP and/or root my device.
I red a few instructions in german and english.
And still nothing.
Details.
1. I have the compilation: from 2016.08.10.
2. Updater says I have new soft. I can download it 100 times. It says "downloading", then "installing" and "rebooting" but in the end nothing changes: still the same rom, still I can download and install this new soft (from 2017.1.12, 927,13 MB).
3. I can open the recovery mode. This is impossible for this device. Power+UP, Power+DOWN = doesn't matter. I see something like bootloop, but after 10-20 seconds the system is rebooting normally. No recovery.
3A. I didn't find an extra settings in "Options" which give more possibilities during turning off (for example: "restart in recovery").
As You see I can't make the backup (nesessary for me) that is why I didn't try "factory reset".
4. Instructions from Internet didn't work:
a) "MT65xx USB VCOM DRIVERS" installs some drivers but I don't have "Ports (COM&LPT) for Windows 10,
b) "SP_Flash_Tool_v5.1640_Win": no scatter file, don't know how to make it, the file from Internet didn't help,
c) "SP_Flash_Tool_v5.1640_Win": I can't tick "recovery" and any other option,
d) "Mtk_Droid_Tool_v2.5.3": it doesn't show any informations about the device.
As You see I can nothing with my P9000.
Do You have any ideas?
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
kelvinvalencio said:
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
Click to expand...
Click to collapse
Try this:
Download a flashable custom rom, put the rom *.zip file in the same folder with ADB.
Go into recovery TWRP, connect your phone to your computer.
Push rom *.zip file to your phone's internal storage with this command in ADB:
push [file.zip] /sdcard/.
Then flash that rom file with TWRP.
Well, sir, how can I get into TWRP? I can't even droidboot... My recovery that I flashed was stock
deleted.
kelvinvalencio said:
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557
tank4k said:
can u open droid boot?
Click to expand...
Click to collapse
No
paktepu said:
Try this
http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557
Click to expand...
Click to collapse
Got your post.. Didn't download..
I want to make sure one thing.. Does this work on TW SKU? Because It's writen that your file is integrated with WW SKU
kelvinvalencio said:
Got your post.. Didn't download..
I want to make sure one thing.. Does this work on TW SKU? Because It's writen that your file is integrated with WW SKU
Click to expand...
Click to collapse
Basicly the procedure to debrick is same. You need to load bootloader temporary since you have a broken droidboot including your partition. I already have same problem with you before.
Yeah its different, you cant use ww to fix this. Find on official zentalk tw forum for complete detail. Shakalaca post that.
Sent from my ASUS_T00F using XDA-Developers mobile app
paktepu said:
Basicly the procedure to debrick is same. You need to load bootloader temporary since you have a broken droidboot including your partition. I already have same problem with you before.
Yeah its different, you cant use ww to fix this. Find on official zentalk tw forum for complete detail. Shakalaca post that.
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks a lot!
Anyway, I've got few questions left..
Yesterday, I did download zip files from this debrick thread (Should be familiar with you) http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
My question is, does this work the same as your files? And, could I do something about it? Like re-use by recycle again the files I've downloaded with something that might help my phone? You know.. 900 MB is not something very small for me.. And maybe I could download separated files that is required.. And make the use of Debrick files I downloaded?
And.. May I have the link of Shakalaca's post, if you don't mind? Thanks a lot, like a lot!
kelvinvalencio said:
Thanks a lot!
Anyway, I've got few questions left..
Yesterday, I did download zip files from this debrick thread (Should be familiar with you) http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
My question is, does this work the same as your files? And, could I do something about it? Like re-use by recycle again the files I've downloaded with something that might help my phone? You know.. 900 MB is not something very small for me.. And maybe I could download separated files that is required.. And make the use of Debrick files I downloaded?
And.. May I have the link of Shakalaca's post, if you don't mind? Thanks a lot, like a lot!
Click to expand...
Click to collapse
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
paktepu said:
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey um, I followed the Debrick one. The problem comes when I ran Debrick.dat, from the Cloverview mode (Press vol down and connect to pc). While the Debrick program runs, the phone "boots". Shows up USB logo and it goes red. Few seconds after then, the program closes, leaves the phone on red USB logo. Is this something normal?
Btw that link can't help.
Sent from my EG680 using XDA-Developers mobile app
Didn't you try reboot from bootloader. If it solves, it means normal. You must thank to intel for this problem.
---------- Post added at 09:07 PM ---------- Previous post was at 09:03 PM ----------
DogeLordTR said:
Didn't you try reboot from bootloader. If it solves, it means normal. You must thank to intel for this problem.
Click to expand...
Click to collapse
OK, I'm really stupid, sorry for time waste.
paktepu said:
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey um, I have contacted Shakalaca and until today I have not retrieved any reply. This problem haven't been solved. Any idea? I see you know a lot about this, and you're very popular arround here.
This happened with my Asus Zenfone 5 (T00j). Tried every solution available on net without sucess, finally took it to Service Center and they had to replace the motherboard
Hello,
I tried to root my phone and everything worked well untill i wanted to install Android 7 Beta on my Huawei Mate 8 (NXT-L29), so i flashed (i think a wrong) a update.zip and as i restarted my phone it didnt boot anymore! Anything i tried wasnt working, so i hope you guys could help me!
Thanks in advance!
EddiFaddy said:
Hello,
I tried to root my phone and everything worked well untill i wanted to install Android 7 Beta on my Huawei Mate 8 (NXT-L29), so i flashed (i think a wrong) a update.zip and as i restarted my phone it didnt boot anymore! Anything i tried wasnt working, so i hope you guys could help me!
Thanks in advance!
Click to expand...
Click to collapse
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
omerus10 said:
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
Click to expand...
Click to collapse
Thanks a lot! I will try! I will reply if it worked or not
omerus10 said:
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
Click to expand...
Click to collapse
Ok, i did follow the steps and it still doesnt boot! What should i try next?
If you installed an update zip it probably wants the stock recovery which you can get in the development thread on this forum. Flash that through fastboot then throw a folder named dload with an update.app in it on your sd card. Phone off hold power vol up and vol down until it brings you to a circle with emui inside. Should run fine after that. If not use the stock recovery to factory reset.
The reason your phone won't boot is because out never encrypted itself.for some reason that means life or death to mate 8 firmware
EddiFaddy said:
Ok, i did follow the steps and it still doesnt boot! What should i try next?
Click to expand...
Click to collapse
when you start the flash.all.bat and you see the unbrick message your phone should be busy and install the above official firmware and recovery.If not run it again disconnect your phone and connect it again when the unbrick message shows.To me worked fine.You must have your phone in fastboot off course
Hi
I have a strange problem on My Samsung S3, GT-I9300
The phone does not boot into Android and I don't get the Samsung splash screen
I get the following message on the screen
"Firmware upgrade encountered an issue. Please select recovery mode in kies & try again"
I have connected it to My laptop and tried with Windows 7 x86 (32 bit) and Windows 10 x64 (64 bit) but Kies just keeps on the screen on connecting and then times out.
I've tried to reinstall the drivers but nothing works
After watching some youtube videos and reading some threads people have said it might be a bootloder problem.
Before I do any flashing or any thing,
I can get into download mode and others have said to use Odin to fix this but I don't want to loose My data on My phone as I don't have a backup and cant get Windows to recognise it as a device where I can back up all the folders
I wanted to ask how to fix this and where I can get the official stock firmware for this phone
It does not have any custom firmware
sammobile have archived the firmware for this model and require me to pay a membership fee to download
I have seen there are some tools such as samfirm and Frija (some say it has a virus, but does not work)
Samfirm does not work, I keep getting errors and I have installed the MS library files but makes no difference
I have tried to download from Updato, but it takes ages to download and sometimes the files dont download correctly
Does Samfirm still work ?
If so how can i get it to work
Are there any new tools, to download firmware
Can anyone upload the firmware for the I9300 here
I need I9300, UK 02 and I9300 UK unlocked firmware
I dont know which one My has
Please can someone help me
Thanks
Did you follow the instructions on the Lineage wiki to install the driver properly?
https://wiki.lineageos.org/devices/i9300/install
Sly Fox007 said:
Did you follow the instructions on the Lineage wiki to install the driver properly?
https://wiki.lineageos.org/devices/i9300/install
Click to expand...
Click to collapse
Hi
What is this
Please
duck361 said:
Hi
What is this
Please
Click to expand...
Click to collapse
You could follow those instructions to get heimdall working and install twrp to get your files.
Then you can use heimdall to flash the stock firmware.
Firmware can be found here https://samfrew.com/model/GT-I9300/
Sly Fox007 said:
Did you follow the instructions on the Lineage wiki to install the driver properly?
https://wiki.lineageos.org/devices/i9300/install
Click to expand...
Click to collapse
Sly Fox007 said:
You could follow those instructions to get heimdall working and install twrp to get your files.
Then you can use heimdall to flash the stock firmware.
Firmware can be found here https://samfrew.com/model/GT-I9300/
Click to expand...
Click to collapse
ok thanks, i will look into it