i have a mda vario and i want to beam files to another phone thru bluetooth but there is no outgoing port. when i go to bluetooth settings and to com ports, only new incoming port is shown. i cant add a new outgoing port. please someone help me on this.
lsnizzle said:
i have a mda vario and i want to beam files to another phone thru bluetooth but there is no outgoing port. when i go to bluetooth settings and to com ports, only new incoming port is shown. i cant add a new outgoing port. please someone help me on this.
Click to expand...
Click to collapse
Hi,
You'll probably need to start bluetooth via the comm manager.
It will find other hardware with open bluetooth ports.
- Go to the file you wish to beam to someone else.
- Tap the file (keep the stylus on it untill you get the menu)
- Choose " send file" (this might be called differently, my version is dutch)
- Select bluetooth.
Good luck!
Greetz,
Flar
it doesnt seem to work
when I beam a file, it never detects a bluetooth. all it shows is the Infared and searching... it searches for a long time but never detects a bluetooth. any other suggestions?
Re: it doesnt seem to work
lsnizzle said:
when I beam a file, it never detects a bluetooth. all it shows is the Infared and searching... it searches for a long time but never detects a bluetooth. any other suggestions?
Click to expand...
Click to collapse
Hi,
The procedure I gave seems to work properly with my MDA.
You could check if the person you're beaming to has bluetooth (turned on) but I guess you've checked that already.
Otherwise try to minimize the distance between the two pieces of hardware.
If that doesn't solve your problem, I can't help you any further, maybe bring it by the shop where you bought it to have it checked?
Good luck & greetz,
Flar
yeah same here never managed to get bluetooth to work
i found that i needed to enable beam recieve in order to recieve on bluetooth, the incoming and outgoing port stuff i left alone.
so i can now receive files but haven't got a clue how to send them, i make a bluetooth partnership ok (my mate can then send me a file) but i can not find the option to send one back. the file explorer menu doesn't have bluetooth listed on it?
R_J_Webb said:
yeah same here never managed to get bluetooth to work
i found that i needed to enable beam recieve in order to recieve on bluetooth, the incoming and outgoing port stuff i left alone.
so i can now receive files but haven't got a clue how to send them, i make a bluetooth partnership ok (my mate can then send me a file) but i can not find the option to send one back. the file explorer menu doesn't have bluetooth listed on it?
Click to expand...
Click to collapse
I am having this same issue. Anyone know the solution? All I want to do is send some files to my wife's v3 but I cant setup a new outgoing port. I am running the latest official rom from cingular.
You need to ensure you already have bluetooth turned on before starting this procedure (many miss this simple point, as they assume it will automatically turned on)
Tap and hold on the file you want to send, and select "Beam"
Wait a few seconds for it to scan for devices.
All IRDA recipients (If any) will be listed, and below them, all available Bluetooth recipients will be shown.
Hope this helps you m8
I'm using TMobile MDA, newest ROM, and having the same problem, I'm able to recieve bluetooth but there is no option for beaming a file via bluetooth, only IR... and yes, bluetooth is enabled properly and I am properly partnered with a V3...
RE: can't beam files using bluetooth port.
lsnizzle said:
i have a mda vario and i want to beam files to another phone thru bluetooth but there is no outgoing port. when i go to bluetooth settings and to com ports, only new incoming port is shown. i cant add a new outgoing port. please someone help me on this.
Click to expand...
Click to collapse
Make sure both phones are enabled to be "seen" . My friend and I were trying to figure this out the other day, and she has her device set to something like 'make this device invisible' so even though our phones were next to each other, her device wasn't showing up. Once we changed this, both devices were visible.
***However, neither phone was allowing the sending of files to each other thru the bluetooth, and I'm wondering if this has something to do with her having a Sprint Treo 650 w/ Palm OS, and I have Cingular 8125 w/ WM5.... anyone have any answers for this one??***
Thanks in advance.
Ermm this is a very stupid question, but I appear not to be able to send recieve stuff with my brand new Hermes. If a file is selected in the File Explorer and 'Beam' is selected, then the BT search works fine, but the usual Align IR port line doesnt even appear :S
Furthermore, the IR LED doesnt turn on (I checked by watching through another phone camera, which can 'see' IR turn on)?
I cannot recieve files either, it would appear, despite beam being enabled in the communications screen and the 'accept incoming beams': nothing happens, other phones can't find the device...?
Ive searched IrDA problems, but found nothing, can anyone suggest an easy way to test (I realise this is a very noobish problem, so thanks for the time spent reading this)?
PS I am running this rom:
http://www.handy-faq.de/forum/htc_h...ermes_rom_wm6_1_wwe_s64_v2_download_2057.html
this is a new kind of problem and the thing is not everybody is using IR for their communication connection. IR is slower than bluetooth so no body bother for it. Even I have used only 5 times (may be) in two years for business card to some non bluetooth handsets
Although IR is not very popular now, I still use IR function very frequently. I use it to transfer small file to my PC which has no bluetooth function built-in, but has an IR port on it.I like the feeling of "everything always be connected".
Back to the title, you could try two things.
1) Check the settings->connection->wireless send/receive( I don't know the exact name on your phone, I use Chinese version, the english name of it is just my guess ), the check box in it should be checked.
2) In wireless manager, in its setting there is also an controlling stuff related to wireless connection, check it ,and make it appear in the manager main screen, then you can turn it on.
You can try above two thing first.
yinx said:
1) Check the settings->connection->wireless send/receive( I don't know the exact name on your phone, I use Chinese version, the english name of it is just my guess ), the check box in it should be checked.
Click to expand...
Click to collapse
just to help......its called settings->connection->beam in english
Actually I have a similar problem, though I have an Atom.
Tried flashing, didn't work for me. Guess it is a hardware problem.
When I cooked my polish rom there was an option normaly enable witch turn of the irda port. When I turn it of the irda works fine. Unfortunetly my present rom WM6.1 wasn't cooked and irda is turn off. Could somebody shaw me way to turn it on? THX.
Hi @ all,
just got my HD2 with german ROM and one of the first things I tried out was to get a connection to my car (Audi A6) through the remote sim access profile (SAP, rSAP) - but it didn't work...
Does someone use the HD2 in his car using the sim access profile, as available in Audi or VW cars?
I have
- Audi A6 Avant (model 03/2008)
- using the "Audi rSAP Adaptor" in the car cradle, located in the arm rest
- everything in the HD2 is activated for Sim Access
Result:
HD2 and car are connecting, I have to put the 16 digit security code in my phone, but after that the SAP mode does not start, and so I have no access to my phonebook. It seems that I only have a "normal" bluetooth handsfree connection, because the HD2 still shows that he is booked into the mobile network - and when rSAP is active, the phone itself disconnects from the network and "falls asleep".
I restarted my HD2 several times, also the rSAP-Adapter by turning ignition of the car off and on until the adaptor switches off, deleting the connections, creating new connections, but nothing helps...
Any comments or experiences from other users are highliy appreciated
Finally, I have to remark that my HTC Snap, which I just upgraded to WM 6.5, works very good im my car with the rSAP - no problems at all, I get all my contacts in the MMI.
Thanks in advance,
Jolig
Just got my HD2 and am having the same problem.
I'm trying to connect with a 2009MY Skoda Superb with the rSAP bluetooth kit.
This works fine with my E71 and my HTC Touch Cruise.
I've been told that there used to be an issue with OBEX authentication on previous versions of Windows Mobile. Apparently, it was important to disable this authentication. However, I can't see the checkbox in the version of WM that the HD2 is running.
Does anyone know what registry entry this checkbox might have been changing?
Thanks,
Bagpuss.
Thanks Bagpuss,
who gave you this information?
I hope someone can solve this problem....but I fear we have to wait until we have more HD2 - owners
-----------------------------------------------------
EDIT:
I just have read something about the "Schaps Advanced Configuration Tool" where someone with similar problems activated OBEX (but it was an older Win Mobile device, and some months ago) - perhaps this could help?
But I just installed version 3.3 of this tool, but it doesn't work on my HD2...
Hi Jolig,
Check out this thread:
http://briskoda.net/superb-ii/howto...us-rns510-using-non-compatible-mobile/131709/
on Briskoda.net.
One of the guys there had lots of problems getting his WM phone to work, and posted the fruits of his labours.
From what I can tell, we can't use the CAB file he mentions, as rSAP is built into the OS version that the HD2 uses.
I've actually logged this issue with HTC, and am awaiting their response. My company is considering the HD2 as our next standard handset, and we won't go for it unless the rSAP functionality works with all VW/Audi group cars.
I'll let you know if they get back to me.
Bagpuss.
Thx Bagpuss,
and yes, in my opinion it's a mess that the rSAP is apparently VERY unimportant for most people or manufacturers...otherwise we wouldn't have this trouble....
I will come back too if I should find some news.
Had the same problem, tried lots of stuff but none of my WM devices is able to work with the rSap protocol. Gave up on it and then my Skoda Columbus system was stolen.
Replaced it with a JVC 7000 with detachable front. Disabled the rSap carkit and am now using the JVC BT carkit wich is working great. The problem is in the MS BT stack. It is not supporting the rSap the way it should. Only phones that work flawlessly are Nokia's I'm afraid...
The lack of rSAP support is what made me ignore the iPhone this time around.
I was hoping that the HD2 would be a viable alternative, but sadly, it doesn't look like this is going to be the case.
As I bought it over the phone, then I've got 7 days in which to return it. If I can't get it to work, then I guess I'll be getting an N97 or N97 Mini (which will definitely work). :-(
Bagpuss.
@ Bagpuss,
otherwise, as I wrote, I can recommend trying the small HTC Snap (or also called Maple?).
Ok, this one has no touch screen and also a very small screen - but I can confirm he works with rSAP and is not too expensive. I will keep this one, although I now have the HD2
As to Bagpuss' information concerning the OBEX, I tried the following:
- installed the newest .NET framework version
(that was necessary to get Advanced Config Tool v 3.3 running)
- install Schap's Advanced Config Tool
- in the menu "Bluetooth", I enabled OBEX
- after that the config tool does a soft reset
...still no success....no SAP and no phone book
I also wrote an email to HTC - it's really annoying, having SAP in the phone etc. and nothing works.
I've a Golf VI (RNS510) and it's working very well. Just had to change Bluetooth security settings that by default does not make HD2 visible to other devices. And after partnership was established, I've reverted the settings to "Allow only devices from MyDevices to connect"
Hi Binks821,
Binks821 said:
I've a Golf VI (RNS510) and it's working very well. Just had to change Bluetooth security settings that by default does not make HD2 visible to other devices. And after partnership was established, I've reverted the settings to "Allow only devices from MyDevices to connect"
Click to expand...
Click to collapse
Can you confirm if your Golf has the premium bluetooth preparation?
There are two different versions of factory bluetooth kit for the RNS510, one which simply acts as a handsfree device, and the other (premium) which is a complete GSM phone.
It's the premium kit which uses rSAP, and which seems to be incompatible with the HD2.
You can tell if your Golf is using rSAP by checking to see if the signal strength meter on the HD2 shows any bars when connected to the car. If it does, then it's not using rSAP. If you see the signal meter with a little x in the corner, then it is using rSAP.
If you do have rSAP working, then I'd really like to know which firmware version your RNS510 is running, and also which firmware version you have in your HD2.
Thanks,
Bagpuss.
yes I've the premium version with RSAP access, not just handset.
Once partnership is established, it says SIM Access profile in Bluetooth settings, not Handset. And it disables my SIM on the phone, so no strength meter.
I had a Tytn before, and it was working the same way. Just when received my HD2 Monday, it was not working but default settings on the phone make HD2 not visible, So I received a message on the car saying "No compatible phone found". After playing with Bluetooth security settings, it was OK.
And of course I can import SIM contacts.
Be sure to check these settings (Settings tab in Sense, then Menu-> All Settings -> Bluetooth)
- Discoverable: always visible
- Advanced -> Connectivity: Allow all devices to connect, just during setup. After that change to "Allow only devices listed in My Devices to connect"
- Advanced -> SIM Access: be sure that rSAP is enabled
HD2 version info:
- OS: 5.2.21864 (21864.5.0.81)
- Manila: 2.5.19202525.0
For the car I have to check once I'll be in.
Hi Binks281,
Thanks for the confirmation.
I've now done some further testing in my car, and managed to have some success.
This is what I did.
In the car:
1) Remove all device pairings from the bluetooth system in the car.
On the HD2:
1) Perform a hard reset.
2) Turn on bluetooth. Make HD2 permanently discoverable.
3) Make sure rSAP is enabled (it is by default).
4) Turn off SIM pin (turns out this isn't necessary, but I wanted to make things simple).
So, at this point, I have the car system with no paired phones, and the HD2 with factory settings and no personal data (contacts etc.). I also made sure there were no contacts on the SIM card.
Back in the car, I perform a device search, and it detects the HD2.
I select the HD2, and the car displays the pairing password (1111 2222 3333 4444).
On the HD2, I enter the password.
I then get a prompt saying that Skoda_rSAP is trying to connect to the remote sim access service. I say allow, and also tick the box to allow all future connections.
After about 10 seconds, the maxidot in the car says 'New SIM card recognised', and prompts me to create a new user profile. I called it 'HTC_HD2'.
After about another 15-20 seconds, the car should extract the SIM details from the phone and the phone name, network and signal bars should appear in the car display.
You can now make calls, but there is no phonebook.
Given what others have said about the phonebook access, I'm pretty sure that this is what was stopping the pairing from working the first time I tried it. I've heard various stories, some which say that the phonebook access only works with SIM card contacts, some which say it only works with OBEX authentication switched off and so on.
If you look at the paired devices screen in the phone, then you can see connections coming into phone. First, you see a connection to the SIM Access profile, followed by a brief connection to the Phone Book Access profile. It was at this point, when accessing the phone book, that my previous attempts to pair failed.
I'm still trying to work out what is causing the problem with the phone, but I have done the following things:
1) Told the car to only sync phone memory contacts. By default, it's set to sync both SIM and phone memory. You can configure this on the car by going to Settings -> Phonebook -> Select Memory, and choosing 'Mobile Phone'.
2) Created four contacts in phone memory, one with only 1 mobile number, one with 2 numbers (mobile and home) and another two with three numbers (mobile, home and work). I've then gone into Settings -> Phonebook -> Upload and sync these across to the car.
So far, this has worked fine and disconnecting and reconnecting to the car works without a hitch.
I'm now going to try syncing a small subset of my contacts with ActiveSync to see if this also works.
If it does, then I'll gradually increase the number until it either works, or fails.
I'll report my progress here.
Bagpuss.
Thanks Bagpuss,
sounds interesting!
I think tomorrow I will try this also:
- remove all paired phones in the car-system
- delete all contacts
- disable SIM Pin
Temporarily I am not sure if I will do a hart reset in the first step because I've already installed so much... When the work fails, I thing I must do it
I will report what happened.
---------------------------
EDIT:
Ah, come on...TV this evening nothing interesting, wife in bed...I tried it, including hardreset
No success.
Bagpuss, what I detected:
First, you see a connection to the SIM Access profile, followed by a brief connection to the Phone Book Access profile. It was at this point, when accessing the phone book, that my previous attempts to pair failed.
Click to expand...
Click to collapse
This connection to the Sim Access Profile I see also, but only for one second, then it dissappears and then the connection "Handsfree" comes up - and this one remains....
I do not know else what to do.
I now reconnected my beloved HTC Snap/Maple, and now I will start installing my apps on the HD2....
Hi Jolig,
Sorry to hear that it didn't work.
By the sounds of it, the Audi system is somewhat different to the VW/Skoda one. From what I can tell, your system also appears to support using phones in handsfree mode (I'm guessing that the iPhone works in your car).
In the VW/Skoda cars, you can either have a car kit that acts as a handsfree device or one that uses rSAP, but not both.
It could just be that the HD2 isn't responding to the rSAP request quickly enough to satisfy the MMI. In that event, it falls back to using handsfree mode.
When it shows 'handsfree' on the HD2, can you use the MMI to make calls?
This whole area seems to be a bit flaky on the HD2, as I still can't work out why mine didn't work when I first tried.
Bagpuss.
Binks821 said:
yes I've the premium version with RSAP access, not just handset.
Once partnership is established, it says SIM Access profile in Bluetooth settings, not Handset. And it disables my SIM on the phone, so no strength meter.
I had a Tytn before, and it was working the same way. Just when received my HD2 Monday, it was not working but default settings on the phone make HD2 not visible, So I received a message on the car saying "No compatible phone found". After playing with Bluetooth security settings, it was OK.
And of course I can import SIM contacts.
Be sure to check these settings (Settings tab in Sense, then Menu-> All Settings -> Bluetooth)
- Discoverable: always visible
- Advanced -> Connectivity: Allow all devices to connect, just during setup. After that change to "Allow only devices listed in My Devices to connect"
- Advanced -> SIM Access: be sure that rSAP is enabled
HD2 version info:
- OS: 5.2.21864 (21864.5.0.81)
- Manila: 2.5.19202525.0
For the car I have to check once I'll be in.
Click to expand...
Click to collapse
Hello Binks821,
I believe that I have the same hardware situation like you but I can't get my HD2 started on my VW Passat with the Premium FSE. The problem is, that I can go through the whole "finding and connecting process" and can save the PIN but then the Connection gets lost between the HD2 and the PFSE. If seems that the PFSE can't connect to the Network (E-Plus) but why the BT-Connect gets lost in this case.
Maybe you can help me to get it work. Thanks a lot!
Negropo
Hello everybody,
maybe I found a solution that work for every sap-handsfree-set. I tried the hint was given on the german car forum "motor-talk" for the connection problem between a vw pfse and the htc touch diamond with wm 6.1 or 6.5.
The trick is that you have to disconnect the HD2 from the pfse by manual when the car first want's to connect automatically. You have to go to the BT-Setup to the tab where are the connected devices listed. If you click on the "+" right of the name of the device you should be seen the tab "Remote Sim Access" or in german "Sim-Zugriff". When the car connect's to the HD2you have to stop this by pressing disconnect in the right below corner of the HD2 screen. Then the connection is terminated. Now you have to start the connection manual over the menu in your car. In a VW you have to press only "connect" in the MFA. And then the HD2 should connect without problems. I don't know why it works but it does. Maybe there is someone here who can explain it and find another "automatic" solution for this problem.
Regards Norman
Well, I don't have a VW but an Audi with an rSAP-Adaptor in the middle arm rest. I fear this also doesn't work for me.
The problem is that this Tab "Sim Access" only appears for just one second, so I have no chance to make anything whithin this single second....and after disppearing of the tab "sim access" another tab "handsfree" appears - and stays. So it seems my Audi only recognizes a handsfree profile. I don't know why,
Temporarily I am happy that I still have my HTC Snap, which is working very fine with rSAP
@ Negropo, can you tell me in which thread at motor-talk you found that?
Thanks,
Jolig
Hi guys,
rSAP works fine with my Audi A4 BTA. I made the HD2 discoverable for any device and I activated the SIM access in the HD2 BT settings. Then I start searching for Bt device on my Audi BT and initiated the connection with the HD2.After inserting the 16 character pin everything works fine.
By the way ... the connections seems to be very stable. With the Touch Diamond I had from time to time connection interrupts where it was necessary to reset/restart the Touch Diamond again.
Best regards,
Matthias
@ Matthias,
"BTA" means that you have the built-in phone with rSAP, right? Is it a brandnew A4?