Related
Hi Everyone,
I rooted and used TWRP. Everything was fine, got SU installed and what not. Then I downloaded CM 10.2 Snapshot and Gapps and flashed them for the G2. I got the fastboot error. After trying to erase and replace the recovery, I found this thread http://forum.xda-developers.com/showthread.php?t=2448960
I get all the way to the last step when I use the LG flash tool and it says "Dowload FAIL!" It says Device Model is different! The LG Flash Tool shows I have a D802, but my phone is branded Verizon and I had LTE working on it earlier today...so I assume it isn't the GSM version...Anybody have any idea what to do?
I'm a new user, so I can't post external links, but here is an imgur address Ea8zgf7.jpg to a photo of the issue
Text on phone in the download screen says "VUSER S0.0 AS0.0 B82 UHS (New line) S US LG-D802 04.3.1 Hrev_10 (new line) VS98010B
Unfortunately I keep running into tons of dead links for different ways of dealing with this issue. Now I'm really concerned that I'm going to get screen burn in because I cannot shut the phone off. It either sits in the fastboot/error screen or in the download screen / firmware update screen.
I would really appreciate anyone's input. I tried to use this link http://forum.xda-developers.com/showthread.php?t=2432476 But almost all of the links are dead.
bobbyt2012 said:
Hi Everyone,
I rooted and used TWRP. Everything was fine, got SU installed and what not. Then I downloaded CM 10.2 Snapshot and Gapps and flashed them for the G2. I got the fastboot error. After trying to erase and replace the recovery, I found this thread http://forum.xda-developers.com/showthread.php?t=2448960
I get all the way to the last step when I use the LG flash tool and it says "Dowload FAIL!" It says Device Model is different! The LG Flash Tool shows I have a D802, but my phone is branded Verizon and I had LTE working on it earlier today...so I assume it isn't the GSM version...Anybody have any idea what to do?
I'm a new user, so I can't post external links, but here is an imgur address Ea8zgf7.jpg to a photo of the issue
Text on phone in the download screen says "VUSER S0.0 AS0.0 B82 UHS (New line) S US LG-D802 04.3.1 Hrev_10 (new line) VS98010B
Unfortunately I keep running into tons of dead links for different ways of dealing with this issue. Now I'm really concerned that I'm going to get screen burn in because I cannot shut the phone off. It either sits in the fastboot/error screen or in the download screen / firmware update screen.
I would really appreciate anyone's input. I tried to use this link http://forum.xda-developers.com/showthread.php?t=2432476 But almost all of the links are dead.
Click to expand...
Click to collapse
See if this will help: http://forum.xda-developers.com/show....php?t=2471370
or this: http://forum.xda-developers.com/show....php?t=2477595
rfarrah said:
See if this will help: http://forum.xda-developers.com/show....php?t=2471370
or this: http://forum.xda-developers.com/show....php?t=2477595
Click to expand...
Click to collapse
Both 404'd
Thy the link below, if anything it will bring you back to Stock.
http://forum.xda-developers.com/showthread.php?t=2471370
bobbyt2012 said:
Both 404'd
Click to expand...
Click to collapse
Let's try that again. I don't know why it copied like that. Anyway:
http://forum.xda-developers.com/showthread.php?t=2471370
and
http://forum.xda-developers.com/showthread.php?t=2477595
Was this ever solved? I have the same problem as the OP except with my ATT LG G2 D800. The lg flash tool shows my device as a D802. I have even tried downloading the D802 firmware, but got an error about the laf memory.
Like the OP I have followed other posts, but never found a solution. Please help.
I have an update: I used the procedure to do a factory reset by pressing the power and vol down until the lg logo appeared then release the power and immediately press the power button again. This prompted me to press the power button to do a factory reset. It came up with an error, but then booted into the CWM which I was using to flash CM on my device.
Hope this helps others.
Hi, I know this has been way back from 2 years ago. But is there any solution yet? Mine is ls980 and I'm having the same problem. Somehow trying ti factory reset does not work as after I released the power and volume down button the screen goes dark immediately and if I press it too long it just turns off.
Flash a different ROM
Ok, I hope this will help others:
I have an LG-H500F from Telcel Mexico, it got the security error bull after rooting and uninstalling bloatware, I could not find the original ROM anywhere but I found one for LG-H502F which is basically the same phone but for two sims and tv tunner.
Anyway, trying to flash the 502F Rom to the 500F kept giving me a download error complaining about not being the same model so what I did was, opened the dll file in an hex editor and found the model part H502F so I changed to H500F and saved it, also I changed the name of the tot file to H500F and Boom! It flashed it and revived my bricked little toy!!!
Hope this helps...
supermauro said:
Ok, I hope this will help others:
I have an LG-H500F from Telcel Mexico, it got the security error bull after rooting and uninstalling bloatware, I could not find the original ROM anywhere but I found one for LG-H502F which is basically the same phone but for two sims and tv tunner.
Anyway, trying to flash the 502F Rom to the 500F kept giving me a download error complaining about not being the same model so what I did was, opened the dll file in an hex editor and found the model part H502F so I changed to H500F and saved it, also I changed the name of the tot file to H500F and Boom! It flashed it and revived my bricked little toy!!!
Hope this helps...
Click to expand...
Click to collapse
Hello, friend. Did you actually root your device? And if so, how did you made it? Please, I've looked everywhere and found nothing. Would like to read you. Thanks in advance and greetings from Mexico too.
Root H500F
Jhakob said:
Hello, friend. Did you actually root your device? And if so, how did you made it? Please, I've looked everywhere and found nothing. Would like to read you. Thanks in advance and greetings from Mexico too.
Click to expand...
Click to collapse
Yes, I did root the device, here is how I did it:
http://forum.xda-developers.com/lg-g3/general/guide-root-method-lg-devices-t3129197
Cheers
Elephone P9000
Hi Guys I need your help urgently please with my elephone p9000
I am stuck really , I got this phone and tried to root it using kingo and now it is stock on the booting logo , I tried to follow your guide and no success!! can you help me how to flash it using adb method for example.
so far
1- phone boots up
2- getting stuck on the company logo while loading
3- tried flashing it using SP flash tool and downloaded the stock rom and still no success.
4- can you help me on how to flash it using the adb.
would appreciate a detailed step by step for beginners
Many thanks
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
willngg said:
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
Click to expand...
Click to collapse
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
a.cid said:
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
Click to expand...
Click to collapse
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
willngg said:
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
Click to expand...
Click to collapse
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
a.cid said:
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
Click to expand...
Click to collapse
version 80 cant get gravity box to work
does not work, scatter file gives issues
maestro2702 said:
does not work, scatter file gives issues
Click to expand...
Click to collapse
try to shorten scatter file name or place in C:/
use latest version of sp flash tools
https://androidmtk.com/smart-phone-flash-tool
download rom 20160419
https://mega.nz/#!3R0zBQAY!zkdYmMcYzps7p8gzUKVBYY9jjwNLgb6mnA9OGKRDY3E
Root using this tutorial
http://bbs.elephone.hk/thread-9919-1-1.html
Detailed instructions German (not the confused instruction of elephone.hk)
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Tried it, but it did not work. tried it multiple times, it states a succes. Download OK. But when i try to start TWRP by holding vol+ and power, or vol+ and vol- and power
it just starts normally, or it gets me to the factory settings.
snoopyminou said:
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Click to expand...
Click to collapse
also tried the drivers, and stuff from this page : https://elephonemobile.eu/t/how-to-root-latest-elephone-p9000-stock-rom/34
I have : Elephone_P9000_20160628 does this have to do with it ?
and i now tried a wireless update... to 20160715 but it says, it will restart in recovery mode to do the update, but then the phone keeps hanging on the ELEPHONE logo... so i can not update the phone anymore apparently... ( so something is done to the factory settings :s but not the TWRMP )
i'm gonna try now the scatt file from my firmware build that i downloaded here : http://www.android-hilfe.de/thema/o...-p9000-p9000-lite-uebersicht-download.785193/
did not work, but now i have the original recovery back on the device, and now i can do the wireless update to 20160715 so i now have latest version of my P9000 firmware... but now... still my main question how to root it that TWRP works
Help !!! i don't use the phone untill i can install xposed framework and Xprivacy on it
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
hozumi70 said:
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
Click to expand...
Click to collapse
Flash magisk via TWRP.
Hi.
I think my problem is unusual.
I try to install TWRP and/or root my device.
I red a few instructions in german and english.
And still nothing.
Details.
1. I have the compilation: from 2016.08.10.
2. Updater says I have new soft. I can download it 100 times. It says "downloading", then "installing" and "rebooting" but in the end nothing changes: still the same rom, still I can download and install this new soft (from 2017.1.12, 927,13 MB).
3. I can open the recovery mode. This is impossible for this device. Power+UP, Power+DOWN = doesn't matter. I see something like bootloop, but after 10-20 seconds the system is rebooting normally. No recovery.
3A. I didn't find an extra settings in "Options" which give more possibilities during turning off (for example: "restart in recovery").
As You see I can't make the backup (nesessary for me) that is why I didn't try "factory reset".
4. Instructions from Internet didn't work:
a) "MT65xx USB VCOM DRIVERS" installs some drivers but I don't have "Ports (COM&LPT) for Windows 10,
b) "SP_Flash_Tool_v5.1640_Win": no scatter file, don't know how to make it, the file from Internet didn't help,
c) "SP_Flash_Tool_v5.1640_Win": I can't tick "recovery" and any other option,
d) "Mtk_Droid_Tool_v2.5.3": it doesn't show any informations about the device.
As You see I can nothing with my P9000.
Do You have any ideas?
Hey,
Has anyone succes in unbricking a Meizu device with the mediatek sp flash tool?
I personally have a bricked MX5 (thanks to the A**hole who made the MX5 BT unlock topic)
nope... still cannot bypass the secure base-band chip problems... the only available method is to program the boot to load the original source code and to creat a
1 - android-info.txt
2- android-product.txt
specific for mx5.. im still experimenting this though.. so far no progress yet..
If we can get this working, hard bricked devices can get recovered with fastboot I think?
Is there a way I can help you?
killerbie said:
If we can get this working, hard bricked devices can get recovered with fastboot I think?
Is there a way I can help you?
Click to expand...
Click to collapse
yes, hardbrick can be recovered if only we can bypass the secure baseband chip.. im still learning the code to creat those 2 files that i mentioned earlier.. so far no good.. still need time to identify which code that can match the baseband chip pass code. i convert update.zip to aboot.img with android file.txt that i creat. but still the code are not match. there is 1 way to reset the baseband chip, but need usb tongled and removed emmc card to reset all.. thats hell of a way to do becoz its include hardware modifications. and also need few device that only availble in chinesse , not mention the language though.. for now lets hope for master yus to bring the miracles to us..
I've found another flash tool, it seems to be provided by meizu themselves with a chinese manual called: MultiUpgrade 4.8.5 bundled with MultiUpgrade 4.8.5
killerbie said:
I've found another flash tool, it seems to be provided by meizu themselves with a chinese manual called: MultiUpgrade 4.8.5 bundled with MultiUpgrade 4.8.5
Click to expand...
Click to collapse
have u tested it yet?
need help,
did anyone can help me to solve my problem with flashtool?i try to flash my homtom ht 20 pro using flashtool, but my flashtool can not download or detect my phone i try to instal media tek usb vcom but stil can not work,cos my win 10 said that driver not digitaly signed,so anyone have solution for my problem, it will greatfull if you give me a link to download another driver so i can start flash my homtom ht 20 pro, thanks
You can install unsigned drivers in windows by shift clicking while reseting windows. You will be prompted later on on various options of reboot. One of them is going to be to not enforce signed drivers. If you have any trouble finding this option, look it up "reboot not enforcce signed drivers". You will find what you need.
Hello all,
I needed to root my phone (P8) in order to install some applications for file recovery. I did the following:
1) I unlocked bootloader (by obtaining the key on huawei pages, going to Settings, Developer options, USB debugging, HiSuite installed to get drivers, ADB Fastboot v.1.4 installed, volume- and power on. I got to the fastboot&rescue screen where after using the command in ADB Fastboot I gained "Phone unlocked" message)
2) I installed the TWRP in the phone (thru the Spanish console)
3) I copied UPDATE-SuperSU-v2.79.zip to internal memory
4) Volume+- Power on and got to the TWRP console where I chose install the UPDATE-SuperSU-v2.79.zip
5) everything looked fine, so I rebooted. Now I have looping logo and I am unable to unbrick the phone.
Any help please?
Thank you
Are you able to start your phone into TWRP?
Sometimes it is a little bit tricky! (hold Volumen-Up + Power, if the phone vibrates release the power button, keep holding the Volumen up button and release it if the Huawei logo disappears)
I have the same problem, and I can't get into TWRP
Paloik said:
Are you able to start your phone into TWRP?
Sometimes it is a little bit tricky! (hold Volumen-Up + Power, if the phone vibrates release the power button, keep holding the Volumen up button and release it if the Huawei logo disappears)
Click to expand...
Click to collapse
Hello,
Thanks for your answer. Yes, I am able to get to TWRP
Ok, what build version is on your P8 ?
Also what TWRP version did you flash ?
These answers are important.
Ps:-
If using B398 you MUST use the latest versions of TWRP and SU.
Just follow the instructions in post #1,
https://forum.xda-developers.com/huawei-p8/how-to/rooting-huawei-p8-marshmallow-emui4-0-1-t3431249
TO THE LETTER, using these linked to files (TWRP and SuperSU) and, hey presto, a fully rooted P8.
https://eu.dl.twrp.me/grace/twrp-3.1.1-0-grace.img.html
https://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
Sparkrite said:
Ok, what build version is on your P8 ?
Also what TWRP version did you flash ?
These answers are important.
Ps:-
If using B398 you MUST use the latest versions of TWRP and SU.
Just follow the instructions in post #1,
https://forum.xda-developers.com/huawei-p8/how-to/rooting-huawei-p8-marshmallow-emui4-0-1-t3431249
TO THE LETTER, using these linked to files (TWRP and SuperSU) and, hey presto, a fully rooted P8.
https://eu.dl.twrp.me/grace/twrp-3.1.1-0-grace.img.html
https://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
Click to expand...
Click to collapse
Hello Sparkrite,
the version I guess (I am not 100 % sure but I remember that I upgraded over the air about two months ago) is B397 and I installed TWRP version 3.0.2-0
Before I progress any further, tell me if the combination is wrong or I can follow the link you posted.
Thank you
You have absolutely nothing to lose by downloading and flashing the versions I have linked to.
Do so and let me know how you get on.
Sparkrite said:
You have absolutely nothing to lose by downloading and flashing the versions I have linked to.
Do so and let me know how you get on.
Click to expand...
Click to collapse
Hello,
I followed the points in the abovementioned post;
a) I was able to see phone unlocked,
b) I installed newer TWRP version (3.1.1.0)
c) I chose the "B" option for rooting and flashed kernel for root (version which is mentioned in the post) and
d) I flashed the SuperSU downloaded from your post
e) I rebooted and ended up with the following error message
Error!
error func No : 10 (boot image)
error No : 2 (load failded!)
I tried the steps c and d but still the same result.
Can you please give me further help?
Thank you
nameh said:
Hello,
I followed the points in the abovementioned post;
a) I was able to see phone unlocked,
b) I installed newer TWRP version (3.1.1.0)
c) I chose the "B" option for rooting and flashed kernel for root (version which is mentioned in the post) and
d) I flashed the SuperSU downloaded from your post
e) I rebooted and ended up with the following error message
Error!
error func No : 10 (boot image)
error No : 2 (load failded!)
I tried the steps c and d but still the same result.
Can you please give me further help?
Thank you
Click to expand...
Click to collapse
Start again and use option "A", Rooting in systemless Mode (by maintaining the original Stock-Kernel.
Thais is the method I used on B398.
Less chance of anything going wrong............
BTW, I can't see an option "D".
Sparkrite said:
Start again and use option "A", Rooting in systemless Mode (by maintaining the original Stock-Kernel.
Thais is the method I used on B398.
Less chance of anything going wrong............
BTW, I can't see an option "D".
Click to expand...
Click to collapse
I tried with the A option and still the same message
Rescue mode
Attention!
Please update system again
...
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed)
The c and d I mentioned in my previous post was related to the step-list (what I did)
nameh said:
I tried with the A option and still the same message
Rescue mode
Attention!
Please update system again
...
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed)
The c and d I mentioned in my previous post was related to the step-list (what I did)
Click to expand...
Click to collapse
Not to worry, have you done a stock update to B398 ?
And if so does the phone boot up correctly ?
This is what I meant by "Start again".
Sparkrite said:
Not to worry, have you done a stock update to B398 ?
And if so does the phone boot up correctly ?
This is what I meant by "Start again".
Click to expand...
Click to collapse
No, I just flashed the SU and twrp. Can you give me a hint where to search for the European version. All I found was a newer version than B398 or other regions.
Thank you
nameh said:
No, I just flashed the SU and twrp. Can you give me a hint where to search for the European version. All I found was a newer version than B398 or other regions.
Thank you
Click to expand...
Click to collapse
Well that explains why you are getting the same error.
First page that came up on Google search :-
http://www.stechguide.com/huawei-p8-b398-marshmallow-update/
Please follow the instructions EXACTLY.
Sparkrite said:
Well that explains why you are getting the same error.
First page that came up on Google search :-
http://www.stechguide.com/huawei-p8-b398-marshmallow-update/
Please follow the instructions EXACTLY.
Click to expand...
Click to collapse
You are the HERO! I am in! Although still the phone is not rooted at least it is working (which means "great to see it up and running again") :victory: :highfive:
I do not know why but Google never showed me the page you posted in its search results (maybe it is the new way of "personalizing" results) or any similar. It was always something from other regions or something which was full of ads and not really trustful.
Thank you again!!!
nameh said:
You are the HERO! I am in! Although still the phone is not rooted at least it is working (which means "great to see it up and running again") :victory: :highfive:
I do not know why but Google never showed me the page you posted in its search results (maybe it is the new way of "personalizing" results) or any similar. It was always something from other regions or something which was full of ads and not really trustful.
Thank you again!!!
Click to expand...
Click to collapse
Excellent !!
Its always good to "resurrect" a bricked phone.
Now, if you use the TWRP and SU I previously linked to and Method A you WILL have a working and most importantly a ROOTED phone.
https://forum.xda-developers.com/huawei-p8/how-to/rooting-huawei-p8-marshmallow-emui4-0-1-t3431249
Cheers.
Sparkrite said:
Excellent !!
Its always good to "resurrect" a bricked phone.
Now, if you use the TWRP and SU I previously linked to and Method A you WILL have a working and most importantly a ROOTED phone.
https://forum.xda-developers.com/huawei-p8/how-to/rooting-huawei-p8-marshmallow-emui4-0-1-t3431249
Cheers.
Click to expand...
Click to collapse
Thank you a lot... I mean A LOT!!! It works! I have literally no words. Thank you again
Hi Everyone
is anyone here having IMEI Null Issue after OTA Update, Possible any fixes for this
would someone be able to help ?
Same here, Is a strange problem.
Have you open engineer Activity app before to apply the ota update?
Helping thread
I found a solution for this problem.
I tried almost every imei repair or imei changer stuff, only " QMSL IMEI & SN Tool v1.4 " fixed it.
You need to unlock bootloader and root first,
And go to link , follow the guide, you can read imei first and you'll find that both imei are still in you phone.
Write your imei back, it might report error but just ignore it, try read & write several times and reboot, your imei will come back.
At the end you can unroot and relock the bootloader.
You have this tuto to xda dev writing by @text1
[GUIDE] Repair IMEI on Qualcomm Snapdragon Devices
I tried with that post and no luck.
businessman9 said:
I tried with that post and no luck.
Click to expand...
Click to collapse
And your previous link has been tested by you an d it's good ?
Yes, I try it with my own phone 1 with null imei.
businessman9 said:
I found a solution for this problem.
I tried almost every imei repair or imei changer stuff, only " QMSL IMEI & SN Tool v1.4 " fixed it.
You need to unlock bootloader and root first,
And go to link , follow the guide, you can read imei first and you'll find that both imei are still in you phone.
Write your imei back, it might report error but just ignore it, try read & write several times and reboot, your imei will come back.
At the end you can unroot and relock the bootloader.
Click to expand...
Click to collapse
Have been stuck all night because of this problem, thank you so much for the solution.
businessman9 said:
I found a solution for this problem.
I tried almost every imei repair or imei changer stuff, only " QMSL IMEI & SN Tool v1.4 " fixed it.
You need to unlock bootloader and root first,
And go to link , follow the guide, you can read imei first and you'll find that both imei are still in you phone.
Write your imei back, it might report error but just ignore it, try read & write several times and reboot, your imei will come back.
At the end you can unroot and relock the bootloader.
Click to expand...
Click to collapse
Hiç bir şey 1 nasıl diag mode açabiliriz. nothing phone 1 how can we open diag mode?
EDIT MODERATION
As new member, I have translated your post. Please be respectful and observant of XDA Rule #4 for all of your future posts.
Thank you for your cooperation, and enjoy your stay on XDA.
Regards - Sib64 - Moderator
Write qcn will be solve the issue