Hello guys I need a little help here in every time I flash marshmallow rom or nougat rom I got bootloop so after googling for an answer I found that the solution is by changing or updating the baseband version so I need you guys to give me a link for a modern baseband version and tech me how to flash the baseband version.
I know I am asking too much but I really love flashing those roms so please help me.
My baseband version is SM-G7102XXUBOE1
I am now using CM12.1
And I tried to flash stock firmware then flashing those roms but still Getting a bootloop.
Note: all lollipop roms work good (except blisspop Rom when I flash it I got bootloop so I extracted the cm12.1 boot.img then I flashed it so blisspop rom booted but Wifi, hotspot and ril didn't work.
Revert to stock ROM using Odin (use NAND erase all option). Then back to install CM13.
rickyyohanes626 said:
Revert to stock ROM using Odin (use NAND erase all option). Then back to install CM13.
Click to expand...
Click to collapse
I have already done that but still the same.
Do you know how to flash a baseband version file???
Sorry sorry that is my fault I didn't use that method but if I used the nand and erased all options wouldn't that will brick my device please explain how please I will do everything step by step so are you going to tech me as I say I am going to follow you step by step and I will take full risponsibility for everything could happen
So any decisions
mahmmoud1231 said:
Hello guys I need a little help here in every time I flash marshmallow rom or nougat rom I got bootloop so after googling for an answer I found that the solution is by changing or updating the baseband version so I need you guys to give me a link for a modern baseband version and tech me how to flash the baseband version.
I know I am asking too much but I really love flashing those roms so please help me.
My baseband version is SM-G7102XXUBOE1
I am now using CM12.1
And I tried to flash stock firmware then flashing those roms but still Getting a bootloop.
Note: all lollipop roms work good (except blisspop Rom when I flash it I got bootloop so I extracted the cm12.1 boot.img then I flashed it so blisspop rom booted but Wifi, hotspot and ril didn't work.
Click to expand...
Click to collapse
I was facing the exact same problem,what i did was to reflash stock frimware containing all 4 file i.e BL,AP,CP,CSC and PIT via odin and this problem was fixed:victory:
Usmandexter said:
I was facing the exact same problem,what i did was to reflash stock frimware containing all 4 file i.e BL,AP,CP,CSC and PIT via odin and this problem was fixed:victory:
Click to expand...
Click to collapse
Thank you so much but do you know where to get the BL,CP,CSC files???
mahmmoud1231 said:
Thank you so much but do you know where to get the BL,CP,CSC files???
Click to expand...
Click to collapse
I downloaded from some misc website so I don't remember it now,but you can try searching on Google for grand 2 4 files repair frimware.
mahmmoud1231 said:
Hello guys I need a little help here in every time I flash marshmallow rom or nougat rom I got bootloop so after googling for an answer I found that the solution is by ch....
Click to expand...
Click to collapse
1.download NK1 firmwire from here
https://forum.xda-developers.com/galaxy-grand-2/general/stock-firmware-grand-2-google-drive-t2849501
2.Extract zip to get a .tar file
3.Download Odin.
4.Select AP and click on the .tar file you extracted
5.Factory format the phone,then take out battery for 8 sec(not so necessary ).Then switch off grand 2.Then hold vokume down+power button and click volume up when asked for confirmation
6.Attach the phone to PC and click on flash
7.After finishing,turn on mobile,complete first setup in stock ROM then install TWRP recovery on the device and install any ROMs. Your problem won't occur again
I have the same problem but i can still run my phone on boot but after some few seconds, it will reboot and then goes back to lock screen and then does it again. I flashed Ressurection Remix for Grand 2 btw
Related
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
pmlfrew said:
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
Click to expand...
Click to collapse
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Racinghart91 said:
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Click to expand...
Click to collapse
Thanks will flash to lollipop today then....
pmlfrew said:
Thanks will flash to lollipop today then....
Click to expand...
Click to collapse
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
pmlfrew said:
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
Click to expand...
Click to collapse
I got it working by flashing the German non branded ROM... Got the error message again but then used a "All samsung recovery.tar" as stated on another post in here and it booted fine eventually... Now on Lollipop. Now time to flash with TWRP.... Again!!!
Please, i need help !
I need help, urgently !
My Note 4 SM-N910C does not work. I can enter the Recovery and the Download Mode. When attempting to install a Custom ROM gives me an error that says I have no data. In the internal memory I have 0mb.
I tried using odin, but I can not .. Salta error.
Someone who can make a backup of your phone (which is factory), leave me a link to download it? So I install the TWRP. Please.
They have another solution?
Thank you.:good:
Hello all!
I did a small mistake with my brother in law's phone. I lost his System and thought "ok no prob... just need to flash the stock with ODIN".
Well... life kicked me in the nuts... every time that I try to flash the original ROM by Odin 3.7 or 3.9 or 3.10 I see an error (Failed (Auth)). I don't know how to solve.
I did flash MIUI with a lot of bugs, so he can use the phone but I'm feeling guilty. Since the ODIN flash is not working and CWM is working... I'm here to ask you for a favor. Does anyone has a Stock or almost stock ROM for the SM-G530H to share ?? Or maybe do you know how to solve the Odin problem? Which firmware to flash without error?
His phone is from TIM provider and we are from Brazil.
Thanks guys!
same problem
Hi i have the same problem is there any update on the issue
I thought we're not supposed to post our questions in general section?
Me too
Guys I have cm11 working good the only bug that he always forget WiFi ssid and I want to back to stock and my phone can't detected by Odin. I have philz touch and I have a semi solution
First of all I extracted the cm11.zip I take the folder. Meta-inf it contain the updater script
I extracted system.img.ext4 with ext4 extractor tool then I created a zip file that contain system folder and meta-inf and flashed it through philz and it worked but WiFi not working and sim too (in my case I need to flash modem.bin too)
Stock ROM 4.4.4
If you feel that I can help message me private cuz I'm not too active here
I will help you if I can :fingers-crossed: peace
danielferratti said:
Hello all!
I did a small mistake with my brother in law's phone. I lost his System and thought "ok no prob... just need to flash the stock with ODIN".
Well... life kicked me in the nuts... every time that I try to flash the original ROM by Odin 3.7 or 3.9 or 3.10 I see an error (Failed (Auth)). I don't know how to solve.
I did flash MIUI with a lot of bugs, so he can use the phone but I'm feeling guilty. Since the ODIN flash is not working and CWM is working... I'm here to ask you for a favor. Does anyone has a Stock or almost stock ROM for the SM-G530H to share ?? Or maybe do you know how to solve the Odin problem? Which firmware to flash without error?
His phone is from TIM provider and we are from Brazil.
Thanks guys!
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=1aNP0ImacUk Look at this if you solve it
Hi,
I want to install emotion revolution and I have some questions:
- I have a SM-N910F with android 5.1.1 and baseband N910FXXU1COH4 Kernel 3.10.89-emotion-TW-5.1.1-nigltly-r21 . TWRP is installed and device is rooted. Can I directly flash or should I flash modem or bootloader first?
- Is the note 5 port release also working or note 4 or is there a specific one (didn't find anything)
Sorry if my questions are stupid, I'm a little bit lost with the version numbers COI4 COH4...
thanks
in advance
Olivier
oliverw68 said:
Hi,
I want to install emotion revolution and I have some questions:
- I have a SM-N910F with android 5.1.1 and baseband N910FXXU1COH4 Kernel 3.10.89-emotion-TW-5.1.1-nigltly-r21 . TWRP is installed and device is rooted. Can I directly flash or should I flash modem or bootloader first?
- Is the note 5 port release also working or note 4 or is there a specific one (didn't find anything)
Sorry if my questions are stupid, I'm a little bit lost with the version numbers COI4 COH4...
thanks
in advance
Olivier
Click to expand...
Click to collapse
firmware version numbers are really simple.
the higher the letter in the alphabet, the newer the version.
that's all there is to it.
so COI is newer than COH.
the Emotion rom topic should have a clear explanation of how to flash it all though.
i think they even added the bootloader and modem that you need.
and a note 5 port...of course that works on a note 4, that's why it's called a port
oliverw68 said:
Hi,
I want to install emotion revolution and I have some questions:
- I have a SM-N910F with android 5.1.1 and baseband N910FXXU1COH4 Kernel 3.10.89-emotion-TW-5.1.1-nigltly-r21 . TWRP is installed and device is rooted. Can I directly flash or should I flash modem or bootloader first?
- Is the note 5 port release also working or note 4 or is there a specific one (didn't find anything)
Sorry if my questions are stupid, I'm a little bit lost with the version numbers COI4 COH4...
thanks
in advance
Olivier
Click to expand...
Click to collapse
1. You must update BL and Modem, else it won't work. Both are available on their homepage, and they're the same as for Emotion Revolution r10.1
2. The Note 5 port is working on the N910F. Be aware though that the Note 5 port "features" stock Samsung colours, i.e. it's plain ugly (IMHO ). That's what's keeping me from flashing it atm. Emotion Revolution r10.1 has a more stock Android colour scheme (e.g. b/w toggles), which I find much more pleasant to the eyes than Touchwiz turquoise. But unlike r10.1, the Note 5 port has a working Theme Store (should have at least), so it's probably possible to theme the ROM to your liking.
Hi, I tried to flash modem and bl with the files on the site. I ended with an unknown baseband and the Phone powering off after 2 minutes... I used odin and put the bl file in the bl section and the cp file un the ap section and clicked start. Is this wrong?
I flashed a stock rom to get the Phone working Alain.
oliverw68 said:
Hi, I tried to flash modem and bl with the files on the site. I ended with an unknown baseband and the Phone powering off after 2 minutes... I used odin and put the bl file in the bl section and the cp file un the ap section and clicked start. Is this wrong?
I flashed a stock rom to get the Phone working Alain.
Click to expand...
Click to collapse
Why didn't you flash cp in the cp section?
Xelasarg said:
Why didn't you flash cp in the cp section?
Click to expand...
Click to collapse
good question. I saw a video telling it must be put in AP. I tried again and put it in CP but this gives the same result, baseband unknown and mobile restarting after 1 min...
any suggestion?
oliverw68 said:
good question. I saw a video telling it must be put in AP. I tried again and put it in CP but this gives the same result, baseband unknown and mobile restarting after 1 min...
any suggestion?
Click to expand...
Click to collapse
Hard to tell. I'd try this:
1. Flash BL and modem via Odin
2. Boot into recovery (TWRP 2.8.7.0)
3. Wipe /dalvik cache, /data, /system, /cache
4. Flash Emotion rom.
If that fails, download a COI3 stock rom from SamMobile, flash it via Odin, then try again.
Ah, the sweet moment when your phone finally boots up and runs. I can't tell how many times im the past years I believed I had murdered my phone.
Xelasarg said:
Hard to tell. I'd try this:
1. Flash BL and modem via Odin
2. Boot into recovery (TWRP 2.8.7.0)
3. Wipe /dalvik cache, /data, /system, /cache
4. Flash Emotion rom.
If that fails, download a COI3 stock rom from SamMobile, flash it via Odin, then try again.
Ah, the sweet moment when your phone finally boots up and runs. I can't tell how many times im the past years I believed I had murdered my phone.
Click to expand...
Click to collapse
Hi,
thanks for the reply. I also installed phone info. After the flash from modem and boot loader, phone info displays the new BL but an empty CP...
I also tryed to flash the COI3 modem and bootloader found on alexndr ROM but with the same result
Do you think it is because I flashed COI3 Modem on a COH4 firmware? This means that flashing emotion will "repair" it?
COI3 Firmware is not availlable for Switzerland for the moment...
oliverw68 said:
Hi,
thanks for the reply. I also installed phone info. After the flash from modem and boot loader, phone info displays the new BL but an empty CP...
I also tryed to flash the COI3 modem and bootloader found on alexndr ROM but with the same result
Do you think it is because I flashed COI3 Modem on a COH4 firmware? This means that flashing emotion will "repair" it?
COI3 Firmware is not availlable for Switzerland for the moment...
Click to expand...
Click to collapse
Flashing a custom rom won't repair your modem. You can try, of course, but I doubt that will fix it. If nothing helps, you can start from scratch, flash the older OH4 firmware with Odin, make sure everything's working, then update BL and Modem, and flash Emotion rom. I hope you've made a backup of all your stuff?
i had my i9500 rooted and had TWRP custom recovery i tried to install custom kernel through TWRP then restarted my phone and got a bootloop and when i press any key it gives me 2 vibrations and nothing more and TWRP was gone and i got back to stock recovery mode and i don't know what to do as i have no backup for my data and it is really important so please help me i would appreciate it so much
i think the problem is with either the kernel or the bootloader but i can't find any of them to flash through odin
my firmware version is 4.2.2 jellybean
help me please
Hesham Mohsen said:
i had my i9500 rooted and had TWRP custom recovery i tried to install custom kernel through TWRP then restarted my phone and got a bootloop and when i press any key it gives me 2 vibrations and nothing more and TWRP was gone and i got back to stock recovery mode and i don't know what to do as i have no backup for my data and it is really important so please help me i would appreciate it so much
i think the problem is with either the kernel or the bootloader but i can't find any of them to flash through odin
my firmware version is 4.2.2 jellybean
help me please
Click to expand...
Click to collapse
Have you tried flashing TWRP again?
GDReaper said:
Have you tried flashing TWRP again?
Click to expand...
Click to collapse
tried flashing TWRP through odin but it doesn't work
i could get some of my files through adb and then flashed a whole rom again but i had no signal and now i'm trying to flash modem only to get signal back
Try Flashing stock firmware from Odin it may help you
he doesn't want to wipe his data.
I think it is the only way to get his phone back
Hesham Mohsen said:
tried flashing TWRP through odin but it doesn't work
i could get some of my files through adb and then flashed a whole rom again but i had no signal and now i'm trying to flash modem only to get signal back
Click to expand...
Click to collapse
You can find some things here
http://forum.xda-developers.com/showthread.php?t=2192025
Are you sure that you've flashed the right version of twrp and ROM for you're device?
PePeMoke said:
You can find some things here
http://forum.xda-developers.com/showthread.php?t=2192025
Are you sure that you've flashed the right version of twrp and ROM for you're device?
Click to expand...
Click to collapse
i got everything ok a few days ago as i found the imei gone so i tried flashing different modems some got me an imei by searching i found many people got the same imei but i can't register on any signal i then flashed the official lollipop version for i9500 not the same model for me but it worked and my imei was restored and signal worked fine then i flashed halcyon rom an it is running very good with halcyon kernel and everything is fine
just wondering if fast charging mode can be enabled for me or not
thanks for all your help guys
Hi Everyone,
So My Samsung Tab A 2016 wifi only T580, is literally dead, but not physically, so the problem is exactly the same as Saznat is this thread: https://forum.xda-developers.com/galaxy-tab-a/help/samsung-t580-update-failed-frp-locked-t3914729
My tab is like new not a single scratch on it :crying:
the tab is:
running android 8
frp locked
can't boot into recovery no matter what stock rom I flash, all I get is no command
I can't flash twrp, the tab won't allow it because of frp lock.
any new tricks to try to fix it from the experts will be appreciated
Anyone??
Leboboy19 said:
Anyone??
Click to expand...
Click to collapse
Hello @Leboboy19 ,
Can you try using Odin (newest version ) and flash the original stock rom that you had before messing around with custom rom. make sure to uncheck re-partition. you may have to flash the stock boot and stock recovery .img which you will find on shellbox firmwares.
If that does not work can you try flashing the twrp md5 for that device . let me know
Bertonumber1 said:
Hello @Leboboy19 ,
Can you try using Odin (newest version ) and flash the original stock rom that you had before messing around with custom rom. make sure to uncheck re-partition. you may have to flash the stock boot and stock recovery .img which you will find on shellbox firmwares.
If that does not work can you try flashing the twrp md5 for that device . let me know
Click to expand...
Click to collapse
Thanks for your message brother, you reminded me of the tab after giving up on it, after months of trying finally found a fix.
to anyone having this problem:
1. Download your latest stock
2. extract it and swap the recovery.img with a recovery.img from a combination file that matches your binary number
3. Enjoy Your Recovered Tablet or sell it like me:laugh: