Database Users

booting failed

Help.
Booting failed. After downloading "[LINUX] Universal Nexus Linux Toolkit v1.0 (Unlock, Lock, Root, CWM, Factory Reset)" and ran Unlock the bootloader, Flash CWM recovery (Standard or Touch), Root the phone, I didn't foud anything change (not like my cellphone, I can select recovery mode when long push the powerbutton off button), so I made a decision (I beleve that's a huge mistake), I did lock the bootloader and flash Google Factory Image. Finally I realised I couldn't boot OS, but I found at the begining of power on, I could choose "start" "restart bootloader" "recovery mode" "power off" , It said booting faild if I select start or recovery mode.
Is there any way to rescue my tablet?

I have not used that tool.. But i believe you were to have a rom on your data/ media partition on your tablet then boot into recovery and flash the rom.. Sounds like your tablet just has no rom on it.. Try to adb push a rom to data /media then go into cwm and flash it .. you can use the nexus tool kit to do this if you do not know how..
Good Luck...
---------- Post added at 06:48 PM ---------- Previous post was at 06:43 PM ----------
oops misread . your saying you can not get to recovery.. Try holding both vol up and down together and then power button from a off state . Before i would say 20 seconds you should get a hard reset.. if not the recovery/ rom flash failed.. You will need to use a Nexus tool kit to put the recovery and rom back.. or use fastboot to push recovery.. boot into recovery and install flash rom....
Sorry

can't see device with usb or adb
I have the same problem. Unforunately, I can't see my device with adb or in windows via the usb port. Without these I can't use the Nexus 7 toolkit. Any idea what I should try next?

jackjsa said:
How Unbrick nexus 7!!
1) Download the factory. image of nexus 7 before by this https://developers.google.com/android/nexus/images.
2) nexus 7 root toolkit for the advanced. utilities it. (Lower left corner of the application), then click Launch.
3) mode is advanced tool you see Quick tools (on the left), select Fastboot-Bootloader me. The middle section (Boot / Flash image) to Flash (Permanent).
4) the file you downloaded from the first) is to run it using 7zip. Do not have a zip file. Recommend that if you are exhausted. The file extension. . Img me into the same folder (for ease of flash. And protection against flash files!) 7zip app and all programs in the community. Reload this App Play Store: https://play.google.com/store/apps/details?id=org.joa.zipperplus7.
Computer loaded from this link. http://www.7-zip.org/download.html.
5) flash file system before the first Boot Click Boot and select the file from 4) the file named boot.img it.
6) flash the Bootloader on file bootloader-tilapia-4.18.img. (The grouper tilapia could be it. If you use the nexus 7 Wifi only).
7) flash the Radio / Baseband file name. radio-tilapia-1231_0.17.0_1205.img it.
8) flash File Recovery file name. recovery.img it.
9) flash file system on the order Userdata System and select the file system.img userdata select userdata.img.
10) completed it. Your machine will reboot. I do not drink coffee.
11) Enjoy! ^ _ ^.
You. Ban flash the wrong files here. I need the name of the file. The only way to tell!
I flash rom 0.2 the risk. I should be very careful.
0.3 If this is the case, you Softbrick it. (Hardbrick may not), then I try this method worked 100%.
There is a 0.4 credit, I thought I was the way I make them up. I want to share with. Please add credit to it. If one on me. Help bring this up with the group, thank you.
0.5 If there is another one your way. The mind of the South. (I have yet to try it as I work) and I like that we do not have information on the nexus (the brick that we do not backup data).
Ways.
First. Downloaded SDK from this link.
http://developer.android.com/sdk/index.html.
Two. Then double-click. Extract the files placed on the desktop.
Three. Downloaded Factory Image (create a new folder and then extract the files to put in it).
. 4 Factory Image extracted successfully, look for a file named flash-all, right-click the file and select edit, then go to delete off-w, then Save and come out.
5. Adt-bundle up to see two folders. Click to select the sdk folder and then uncompress the Factory Image files Copy all (6 files) and put it in a folder. platform-tools.
6th. Then double click the flash-all then lay in wait for a while to update it back to Factory Image kosher by the data is lost. Mod it to disappear, they are only dancing, etc. (it's new to flash).
Note: Do not forget to delete off-w, otherwise everything totally disappeared.
Suggested: do not open a cmd without the headache type. Not faced with the annoying Waiting for device.
0.6 Read carefully and understand it before doing it. Because many steps too. And all the way I say. In the computer, you must install the drivers and I!
It's .7 stock rom nexus 7 Wifi version, select nakasi (grouper) it. The Model 3G or 3G + Wifi. Select nakasig (tilapia).
0.8 I thank everyone. And all the comments too. I suggest that the nexus 7 brick.
0.9 If a brick at me because I was pushed to the nexus 7 root tool v 5.0 to flash stock rom just to watch a lot of this toolkit. + audio bug bit orchestrated. I recommend the use of or nexus root toolkit v1.6.3 wugfresh it.
Click to expand...
Click to collapse
Please stop posting the same thing in every thread; it's not helpful.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 7 using Tapatalk HD

korockinout13 said:
Please stop posting the same thing in every thread; it's not helpful.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Sorry, I just want to help!

boot failed
tuuss said:
Help.
Booting failed. After downloading "[LINUX] Universal Nexus Linux Toolkit v1.0 (Unlock, Lock, Root, CWM, Factory Reset)" and ran Unlock the bootloader, Flash CWM recovery (Standard or Touch), Root the phone, I didn't foud anything change (not like my cellphone, I can select recovery mode when long push the powerbutton off button), so I made a decision (I beleve that's a huge mistake), I did lock the bootloader and flash Google Factory Image. Finally I realised I couldn't boot OS, but I found at the begining of power on, I could choose "start" "restart bootloader" "recovery mode" "power off" , It said booting faild if I select start or recovery mode.
Is there any way to rescue my tablet?
Click to expand...
Click to collapse
I got error while flashing and then after power up git little note "boot failed"
I tried to get into fastboot mode, few times i got fastboot but it was not responding and adb saw no devices. after few attemps i got working fastboot mode and then flashed it as normal.

GUIDE - Install TWRP Recovery and Root MOTO E Phone

WARNING!
Your warranty is void if you follow the given instruction in this guide. Read all the instruction very carefully and Perform everything at your own risk.
This guide is only for the MOTO E android smartphone. Don’t try this method on any of other Android devices, It may hard brick your device. So, first confirm your phone model number in your android phone settings. To do this Go the Settings page of your device and check out the “About Device” option.
PRE-REQUISITES AND REQUIREMENTS
1. BACKUP YOUR ANDROID DATA
2. INSTALL MOTO E DRIVERS
3. ENABLE USB DEBUGGING MODE
4. CHARGE YOU ANDROID
If your device switched off during this process, it could damage or brick the device. Make sure that your Android battery is full charge or near about 50-70% battery level.
HOW TO INSTALL TWRP & ROOT MOTO E
Step 1. Download the Fastboot files for MOTE E and extract the folder on your desktop.
Step 2. Download The TWRP recovery from here (Rename the file to recovery.img) and extract in the same folder as of step 1.
Step 3. Download The SuperSU from here and copy it into the root of your internal memory,
Step 4. Now all the important files are with your. First you have to unlock the bootloader of your device. Read here.
Step 5. Connect your phone to PC and Reboot to bootloader by pressing VolumeDown + Power button for about 6-7 seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 6. Go to the Fastboot folder in step 1, Do Shift + RightClick in empty space in the folder without selecting anything, Select Open a command window here.
Step 7. Now you will see the command prompt window on your screen. In the command prompt window, you need to enter the below mentioned command;
fastboot flash recovery recovery.img
Step 8. Press Volume Down to select recovery on fastboot menu, then press Volume Up to confirm your choice to boot into recovery
Step 9. Now touch doesn’t work in recovery straight away, so wait 60 seconds without touching the phone, The phone screen will go blank.
Step 10. Press power button and do swipe to unlock to get your touch working again! Select Install, scroll down and find the SuperSU Zip downloaded in step 3.
Step 11. Swipe to confirm, wait untill the flash is complete and then select reboot. First reboot will take some time, so no need to worry.
Now check your MOTO E app drawer, There should be SuperSU installed. Congratulations you are rooted!
via @howtorootmobile

I think so this guide is already available!!

TheStrix said:
I think so this guide is already available!!
Click to expand...
Click to collapse
Yeah I did that guide earlier!

recovery flash error
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks

5644red said:
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks
Click to expand...
Click to collapse
Write
Code:
mfastboot flash recovery recovery.img
it will work!

deej_roamer said:
Write
Code:
mfastboot flash recovery recovery.img
it will work!
Click to expand...
Click to collapse
Thanks for the help buddy but still it isnt working.

5644red said:
Thanks for the help buddy but still it isnt working.
Click to expand...
Click to collapse
Download another version of mfastboot, or simply just fastboot, or try from scratch again!
I saw earlier your mfastboot folder has recovery.img, so cannot be a misplace error!
Still check again it is there! Otherwise, do what i wrote in first line!

deej_roamer said:
Download another version of mfastboot, or simply just fastboot, or try from scratch again!
I saw earlier your mfastboot folder has recovery.img, so cannot be a misplace error!
Still check again it is there! Otherwise, do what i wrote in first line!
Click to expand...
Click to collapse
tried like 5 or 6 times buddy.. still no use.. i was able to unlock bootlocker without any trouble so i hope there is no trouble with moto drivers, i feel it might be due to fastboot file.. ill try again soon.. thanks

Can you please tell me if i will be able to install the 4.4.3 update after flashing custom recovery. Thanks in advance

Ccceenu said:
Can you please tell me if i will be able to install the 4.4.3 update after flashing custom recovery. Thanks in advance
Click to expand...
Click to collapse
No you need stock recovery!
But its alright you can revert back to custom recovery from here
So go back and enjoy custom recovery,
And if you still prefer not to change your recovery, you can try this guide!

deej_roamer said:
No you need stock recovery!
But its alright you can revert back to custom recovery from here
So go back and enjoy custom recovery,
And if you still prefer not to change your recovery, you can try this guide!
Click to expand...
Click to collapse
Thanks for your reply..I read that somewhere that during updates it checks for stock recovery..so i refrained from flashing custom recovery ... there is another question if you can answer...will the procedure of rooting will change in the 4.4.3 version. Thanks in advance

Ccceenu said:
Thanks for your reply..I read that somewhere that during updates it checks for stock recovery..so i refrained from flashing custom recovery ... there is another question if you can answer...will the procedure of rooting will change in the 4.4.3 version. Thanks in advance
Click to expand...
Click to collapse
No it wouldn't

moto e
i unlocked my bootloader can i directly install supersu from recovery without flashing custom recovery?

I guess....
5644red said:
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks
Click to expand...
Click to collapse
Did you make sure that you actually 'Opened' the 'fastboot' folder and then press shift and right click....?

having same problem
5644red said:
Thanks for the help buddy but still it isnt working.
Click to expand...
Click to collapse
Hey did u problem got sorted as I am having the same problem as u, kindly help me if anyone can

I tried to install twrp recovery but in cmd its shows an error
Error while loading recovery.img

Can I change my recovery from cwm to twrp
Sent from my Moto E using XDA Free mobile app

I am getting "partition size mismatch" error when i try to flash the TWRP recovery.

[Guide]Unlock Bootloader&Install Twrp And Flash Cm12.1 All in One For Meizu M2/Mini

[Guide]Unlock Bootloader&Install Twrp And Flash Cm12.1 All in One For Meizu M2/Mini
First Unlock Bootloader& Install Twrp .​
Note:This Is Modified Guide Of Unlock Bootloader And Flash Twrp with Installation Of Cm12.1 Rom
DISCLAIMER:
Unlocking the bootloader cause warranty void :silly: ,I do not give guarantee of possibility of relock bootloader again .I am not responsible for the risk bootloop, softbrick, hardbrick, so the 2nd world war, natural disasters, atomic bombs, etc: v: v: Unlocking the bootloader cause loss of files in internal memory (full reset), backup all apk use ES file explorer or any application and do not forget the important data in Internal memoy.So you have to be patient and read well.
BASICS NEEDS:
Flyme 4.5.4I(International Version Only Not Indian Version) If not have first download It from here ->
www.flymeos.com/firmwarelist?modelId=18&type=1
PC / Laptop winXp or Above
and Minimal ADB Driver download here ->
http://forum.xda-developers.com/showthread.php?t=2317790
Rooted Meizu mini M2 (M2/Mini ONLY !!!)
Busybox already installed,if not then download from Play Store
File unlock the bootloader and TWRP download here ->
http://www37.zippyshare.com/v/fvm5edpr/file.html
ADB and Fastboot Files downloaded at ->
https://goo.gl/mZzVS4
(Specifically Windows 8 and above) Disable driver signature that ADB Mediatek detected.
How: Go start button -> type and select advanced startup option -> select restart now -> select troubleshoot -> select advanced option -> select the startup settings -> select restart -> wait for it to reboot and enter the blue screens -> type the numbers -> wait until the computer / laptop restart
STEPS: :highfive:
Extract "file_root.zip" in PC / Laptop drive anywhere, it's up to you.And extract files unlock_bootloader_with_new_twrp put the file "twrp_2.8.7.0.img" in the folder of "file_root.zip"put the file "unlock_bootloader.sh" in to external folder, open your phone go to Settings accessibility ->Developer option -> USB debugging -> Tick To ON plug Your Meizu m2 into laptop/PC go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB .(Keep In mind Minal Adb Driver Folder should include file_root folder in it if not then copy folder and paste it there unless You will get error in detecting device).
Write "adb devices",wait for it to detect the device. If detected as "unauthorized" , please check again, there must be a warning. Select the checkbox and select OK, will eventually checked again be detected serial number
in your pc/laptop type "adb shell"type "su", check if there notification in phone.
And asked permission root, select grant permission then type.
"sh /storage/sdcard1/unlock_bootloader.sh"
wait until it says "now you can fastboot oem unlock your device"then type
"adb reboot bootloader"then type "
fastboot devices" to check whether fastboot already entered yet. if it has been entered, it will be detected.
Then type "fastboot oem unlock" push the button Vol UP and wait. once completed, the screen will be stuck. Do not panic, because this is not like brick hard reboot (press the power button for about 10 seconds to death and on again) Congratulations, you have bootloop (still unfinished the process by the way.
3)enter recovery (when bootloop direct press Power + Vol UP to vibrate)The Select Wipe Data Factory reset .
push restart wait for 10 minutes.You've done Unlock Bootloader
Bootloader is already unlock yet, how To flash TWRP
enter the command prompt (go to the folder "file_root" hold down the keyboard Shift + right click on the mouse/touchpad select "open command windows here) "adb reboot bootloader"enter fastboot like stated above.Then type.
"fastboot flash recovery twrp_2.8.7.0.img"
wait a minute turn off thr phone. and enter recovery (Power + vol up until vibration)you'll Be in TWRP
Now It's Time To Flash Cm 12.1
Note: As i Told You To Flash Flyme 4.5.4i(international Version)First.If still not installed then you will not able to install Cm12.1
Why?
Ans: As this rom is for Meizu M2 mini and model number of both devices Meizu M2 and Meizu m2 mini are not same so in this rom its developer had scripted a script in that it will not allow you to install Cm12.1 until it Check Ether Its Meizu M2 mini or not(Our is meizu m2) if it had some problem it will decline further installation process
Like this "Error In Executing Updater Binary In Zip"
Steps for installing rom
1.Unlock bootloader
2.Install Twrp
3.download Cm12.1.zip in SD
4.reboot to recovery
5.wipe everything( It Can Wipe Your Internal Storage too So i recommend You to Get Internal Storage Backup Too)
6.install zip
8.reboot to system
It will take time for first boot so don't worry.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Still Not Able to flash error still comes
then try this two below given steps
1)Try with Flyme 5 beta version it can be flashed(untested)
2)Decompress Cm12.1 custom rom then go to bin folder there will be a file name"otasigcheck.sh"
Delete that file recompress whole rom again.
not recompress whole folder just recompress all files wich will be there eg :boot.img,system,bin etc (tested working 100%)
After this you may not able to get features update so you if you want to update download manually
"Credits"
Developer Of Cm12.1 :good: (Most Thankful Person)
Murtaza Piplod (Whole New Guide Noob Friendly )
My All co workers :highfive:

Good job

sir, i installed twrp.img on meizu m2 mini (flyme 5.1.11 g) with flashify without unlocking bootloader. Now my meizu m2 is stuck on meizu logo and continuously restart with a little vibration. No recovery is working. Only fastboot mode is working. How i can solve this?

twrp meizu m2
jai aplique cet method et jai re
usi merci baucou.

salman.ecti said:
sir, i installed twrp.img on meizu m2 mini (flyme 5.1.11 g) with flashify without unlocking bootloader. Now my meizu m2 is stuck on meizu logo and continuously restart with a little vibration. No recovery is working. Only fastboot mode is working. How i can solve this?
Click to expand...
Click to collapse
Rip dude you just finished your phone
why you guys do this -_-

how to unlock bootloader
my fhone is enter only to fastboot
how to unlock bootloader???????????????????????????
[email protected]

moshe3150 said:
my fhone is enter only to fastboot
how to unlock bootloader???????????????????????????
[email protected]
Click to expand...
Click to collapse
a guy can fix this i will tell him to contact you

try to repair using UFI box. @salman.ecti

Dear murtaza1326,
How can i switch from Flyme 5.1.7.0Y to Flyme 6.1.0.0G?
What i need to do?
Thanks in advance..

Ro33_Y said:
Dear murtaza1326,
How can i switch from Flyme 5.1.7.0Y to Flyme 6.1.0.0G?
What i need to do?
Thanks in advance..
Click to expand...
Click to collapse
i will write a guide for it

Dear murtaza1326,
I'm sorry I'm nagging, but maybe you have a link to how to make the switch between the versions?
I need the device urgently, and I don't want to ruin it again, especially after I paid for the repair.

murtaza1326 said:
i will write a guide for it
Click to expand...
Click to collapse
In the Steps given in the guide, it says- "go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB."
I have installed Minimal ADB driver from the link http://forum.xda-developers.com/showthread.php?t=2317790 mentioned earlier in the guide. Do i need to copy all the contents of the File_root.zip folder to the folder which is created upon installing ADB from the link you mentioned (because it also asks to replace 4 files which pre exist there) or copy the contents to a new folder because i am having problem understanding this step.
Thnx!

lilcat1 said:
In the Steps given in the guide, it says- "go to
File_root.zip folder copy all files and Paste it in the Minimal ADB Driver Folder then Install Minimal ADB."
I have installed Minimal ADB driver from the link http://forum.xda-developers.com/showthread.php?t=2317790 mentioned earlier in the guide. Do i need to copy all the contents of the File_root.zip folder to the folder which is created upon installing ADB from the link you mentioned (because it also asks to replace 4 files which pre exist there) or copy the contents to a new folder because i am having problem understanding this step.
Thnx!
Click to expand...
Click to collapse
just paste recovery.img and unlock bootloader file and its done

OK done

Helpful notes. Thanks sir.
I have meizu m2 n YU yureka
Can I use same procedure for YU yureka

Dsnagi2811 said:
Helpful notes. Thanks sir.
I have meizu m2 n YU yureka
Can I use same procedure for YU yureka
Click to expand...
Click to collapse
Method of unlocking will be different.

adarshm4you said:
Yu is not yureka its yunos which is chinese based flyme os.Install flyme 4 to unlock bootloader first.
Click to expand...
Click to collapse
I already upgraded to cm13 in yureka. But still lagging to upgrade meizu m2

Dsnagi2811 said:
I already upgraded to cm13 in yureka. But still lagging to upgrade meizu m2
Click to expand...
Click to collapse
This upgrade procedure is only for meizu.It might not suitable for yureka.Methods will be different.
Check yu yureka forum on xda for support bro.There will be thread for that.
What is problem you facing on upgrading m2?

adarshm4you said:
This upgrade procedure is only for meizu.It might not suitable for yureka.Methods will be different.
Check yu yureka forum on xda for support bro.There will be thread for that.
What is problem you facing on upgrading m2?
Click to expand...
Click to collapse
Can i follow same method to unlock bootloader and install twrp recovery in meizu m2. But go for different roms

Dsnagi2811 said:
Can i follow same method to unlock bootloader and install twrp recovery in meizu m2. But go for different roms
Click to expand...
Click to collapse
Yes you can use abow method.Better is follow vedios in youtube for better understanding unlocking m2 before doing.

[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]

[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
Reboot to EDL mode from FASTBOOT!
No more Test Point Method needed ​
Technical Details:
Redmi Note 3 support rebooting to EDL in Android Bootloader aboot module (the "reboot-edl" command) but fastboot utility doesn't recognize "reboot-edl" in the command line and refuses to sent the command to the device. Since FastBoot command protocol is simple and text-based, it is enough to send a packet containing "reboot-edl" text over USB. The simplest way to do that is to patch Windows fastboot.exe file, replacing "reboot-bootloader" text with "reboot-edl". As "reboot-bootloader" string is found in the command line, fastboot.exe sends the same constant string to the device. So if "reboot-bootloader" is replaced with "reboot-edl", you can specify "reboot-edl" in the command line and the same text will be sent to the device.
New Update: Fastboot updated to latest version.
Tutorial:
1. Download the Fastboot_edl-v2.zip from Here.
2. Extract the zip in your desktop
3. Open the folder and double Click on Reboot.bat
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Reboot your device to Fastboot Mode by pressing
Vol Down + Power button and connect your device with PC and Press Enter.
5. Your Device will be rebooted to EDL!
6. Now flash your Fastboot Rom with Mi Flash Tool to Unbrick your Mi Note 3. ​
Proof:
Thanks to @emuzychenko for the Idea!

This is AWESOME!! Just tested and worked amazingly.
Thank you!
Edit: the included command prompt didn't work for me though, launched standard and traversed to this folder

It would've been better if the source of this guide is also mentioned, just my thoughts
Sent from my Redmi Note 3 using XDA-Developers mobile app

Harish_Kumar said:
It would've been better if the source of this guide is also mentioned
Click to expand...
Click to collapse
Especially since most of text had been copied "as is".

Please add this to op
=> https://youtu.be/-6uErg52nKs

kaushal64 said:
Please add this to op
=> https://youtu.be/-6uErg52nKs
Click to expand...
Click to collapse
I have updated the fastboot.exe and the method also. Update your video with this and I will add it to OP.

I had replaced link for modified fastboot file please add it to op.

Harish_Kumar said:
It would've been better if the source of this guide is also mentioned, just my thoughts
Click to expand...
Click to collapse
emuzychenko said:
Especially since most of text had been copied "as is".
Click to expand...
Click to collapse
Thumbs up!

This is great
My problem solved
Many thanks

not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...

Zarko007 said:
not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...
Click to expand...
Click to collapse
Send me your current emmc_appsboot.mbn and I will check what is happening wrong there.

BRoy_98 said:
Send me your current emmc_appsboot.mbn and I will check what is happening wrong there.
Click to expand...
Click to collapse
Where to find it?

Zarko007 said:
Where to find it?
Click to expand...
Click to collapse
You can find it in the fastboot rom. Or if you have recovery rom, then go to the firmware-update folder in the zip there you will find it.

BRoy_98 said:
You can find it in the fastboot rom. Or if you have recovery rom, then go to the firmware-update folder in the zip there you will find it.
Click to expand...
Click to collapse
Maybe stupid question, but wouldn't phone go to edl mode (with red led flashing) before flashing rom and what then mbn file has to do? According to your manual it is the last step?
thanks

Zarko007 said:
not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...
Click to expand...
Click to collapse
Is your device bricked or you want to flash an official miui rom? Since your rom looks like a distributor rom not an official rom.
Sent from my kenzo using Tapatalk

sator02 said:
Is your device bricked or you want to flash an official miui rom? Since your rom looks like a distributor rom not an official rom.
Sent from my kenzo using Tapatalk
Click to expand...
Click to collapse
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....

Zarko007 said:
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....
Click to expand...
Click to collapse
Don't use this tool if your device is not bricked, your rom is a distributor rom that's why you cannot unlock your device, you have to flash miui rom prior to unlocking, you can do it thru edl mode using adb, search on miui forums and you'll find it.
Edit: check this out: http://en.miui.com/thread-235865-1-1.html
Sent from my kenzo using Tapatalk

Zarko007 said:
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....
Click to expand...
Click to collapse
If your device is not bricked, then you can reboot to EDL mode from adb. Do this to reboot to edl from adb:
1. Connect your device to PC.
2. Open adb and type: adb devices and press enter to see your device if it is connected properly.
3. When you can see your device ID, type: adb reboot edl and press enter. It will reboot your device to EDL mode.
4. Now flash your rom with Mi Flash.

BRoy_98 said:
If your device is not bricked, then you can reboot to EDL mode from adb. Do this to reboot to edl from adb:
1. Connect your device to PC.
2. Open adb and type: adb devices and press enter to see your device if it is connected properly.
3. When you can see your device ID, type: adb reboot edl and press enter. It will reboot your device to EDL mode.
4. Now flash your rom with Mi Flash.
Click to expand...
Click to collapse
I have tried it already many Times but no success...

Zarko007 said:
I have tried it already many Times but no success...
Click to expand...
Click to collapse
This must be driver problem. Install MI PC suite and it will install all necessary drivers. Then try it again.

Xiaomi Redmi 2 2014811 bricked after updating SuperSu binary in recovery?

I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sufoc said:
I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
Click to expand...
Click to collapse
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!

edit: solved

edit: solved

sethidheeraj06 said:
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!
Click to expand...
Click to collapse
The fastboot rom is incorrect for my model (missmatching image and device error)

sufoc said:
The fastboot rom is incorrect for my model (missmatching image and device error)
Click to expand...
Click to collapse
Which device do you have..?
Kindly tell the model no. Such as 2014818.

sethidheeraj06 said:
Which device do you have..?
Kindly tell the model no. Such as 2014818.
Click to expand...
Click to collapse
It's the same as in the title, 2014811 TD-LTE