Following my recent LTE issue and after some trial and errors, I can confirmed that the latest dev rom contains some bugs in the modem file and hence flashing the lastest stable rom's modem file will resolve this issue.
To flash simply put device in fastboot mode and then
fastboot flash modem NON-HLOS.bin
*Edit reuploaded modem file from 6.12.29 instead as reported the latest stable modem file causing video lagging and sound issue
https://drive.google.com/file/d/0B_yP2fUmqL6KRXJLc1hMWmRPOG8/view?usp=sharing
Can you please explain how to flash that file with Fastboot?
Ninja1400 said:
Can you please explain how to flash that file with Fastboot?
Click to expand...
Click to collapse
Are you asking how to enter fastboot mode?
No, how to flash the file.
Ninja1400 said:
No, how to flash the file.
Click to expand...
Click to collapse
I assume you have ADB or TWRP already.
Copy NON-HLOS.bin to this folder
Just go to the folder via command prompt and copy paste below command and paste to it.
fastboot flash modem NON-HLOS.bin
Hope it helps:good:
Ninja1400 said:
No, how to flash the file.
Click to expand...
Click to collapse
Download and install Minimal ADB and Fastboot
Download the modem file of the stable ROM and copy that file to your computer's C:\ folder
Turn off your Mi Mix
On your Mi Mix press the power button and volume-down button at the same time for 5 seconds. The device should boot into fastboot mode
Connect your phone with the USB cable to your computer
Open your computer's start menu and search for Minimal ADB and Fastboot, and click it
A command prompt will open, where you will type the following command into it and press enter:
Code:
fastboot flash modem C:\NON-HLOS.bin
I confirm LTE problems (Italy H3g) with the last ROM, solved by flashing the old modem as suggested. Thank a lot for thew workaround.
Leechoonhwee said:
Following my recent LTE issue and after some trial and errors, I can confirmed that the latest dev rom contains some bugs in the modem file and hence flashing the lastest stable rom's modem file will resolve this issue.
To flash simply put device in fastboot mode and then
fastboot flash modem NON-HLOS.bin
https://drive.google.com/file/d/0B_yP2fUmqL6KLTJONXo1NGJ0cG8/view?usp=sharing
Click to expand...
Click to collapse
EDIT: Forget what I said, works for me! Thank you!
EDIT 2: My phone seems to be laggy and YouTube now doesn't work after I flashed the modem. Back I go to 6.12.29.
emann56 said:
EDIT: Forget what I said, works for me! Thank you!
EDIT 2: My phone seems to be laggy and YouTube now doesn't work. after I flashed the modem. Back I go to 6.12.29.
Click to expand...
Click to collapse
same here and the sound doesn't work anymore
admkjz said:
same here and the sound doesn't work anymore
Click to expand...
Click to collapse
Good to know I wasn't going crazy:laugh:
emann56 said:
EDIT: Forget what I said, works for me! Thank you!
EDIT 2: My phone seems to be laggy and YouTube now doesn't work after I flashed the modem. Back I go to 6.12.29.
Click to expand...
Click to collapse
Sorry. I extracted the modem from 6.12.29 and reuploaded to first post. Thanks for pointing out!
Leechoonhwee said:
Sorry. I extracted the modem from 6.12.29 and reuploaded to first post. Thanks for pointing out!
Click to expand...
Click to collapse
This upload is working perfectly for me. LTE shows up. I watched YouTube and video and audio play perfectly.
EU ROM 7.1.5 with Indonesian XL Operator.
The file uploaded before was still broken LTE for me.
Leechoonhwee said:
Sorry. I extracted the modem from 6.12.29 and reuploaded to first post. Thanks for pointing out!
Click to expand...
Click to collapse
now for me is good
@Leechoonhwee Could you share the 7.1.5 modem, too. Just for testing. I've no possibility to download the full ROM atm.
pappschlumpf said:
@Leechoonhwee Could you share the 7.1.5 modem, too. Just for testing. I've no possibility to download the full ROM atm.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B_yP2fUmqL6KRmxfbDhKb0xNejA/view?usp=sharing
Not too sure why you needed that version because seriously, its bugged and not working.
Leechoonhwee said:
https://drive.google.com/file/d/0B_yP2fUmqL6KRmxfbDhKb0xNejA/view?usp=sharing
Not too sure why you needed that version because seriously, its bugged and not working.
Click to expand...
Click to collapse
Thx,
i just want to test how it works on a Mix with patched NVRAM LTE channel values. If it works like crap i'll return to .29 modem.
pappschlumpf said:
Thx,
i just want to test how it works on a Mix with patched NVRAM LTE channel values. If it works like crap i'll return to .29 modem.
Click to expand...
Click to collapse
I was thinking of doing the same, let me know with your findings... Perhaps we need to modify the modem to enable extra bands.
Are you guys still having problem after flashing latest epic rom? 4g LTE has already been fixed there, I am using it and all works fine, speed, sound, everything is working.
yakuzlin said:
I was thinking of doing the same, let me know with your findings... Perhaps we need to modify the modem to enable extra bands.
Click to expand...
Click to collapse
No LTE 800 Mhz with 7.1.5 modem But with globeROM 7.1.5 none of the mentioned bugs until now. YouTube is perfect and the device is as smooth as always. If i'm back to 2600 MHz area i'll check again.
Gesendet von meinem Xiaomi Mi MIX
Awesome work!
Worked for me. No audio or lag issue. I was loosing my mind thinking why all of a sudden couldn't connect to LTE.
Thanks again!
Related
Hello,
I am unable to connect to any 2.4 Ghz network (tried at home, friend's, hotel's, etc.). While at home, my network will go on and off being displayed in my phone. I can select it and enter my password. Then it will say "Connecting..." but nothing will happen. After that it goes in and out of being in range even though I can be adjacent to my router.
5 Ghz works flawlessly
Bootloader is unlocked
Tried multiple JB and KK Cyanogen based ROMs and stock
I am also unable to connect to any device via bluetooth (if that helps at all, probably going to post about this separately later)
I have searched google and multiple forums. The posts nearest to my issue mention a fix for people who formatted their persist folder (I have not, plus I tried copying it anyways) and a fix using a static IP address. No luck.
If anyone has an idea or can provide a fix, I would really appreciate. I am going insane
Thank you.
brando9 said:
Hello,
I am unable to connect to any 2.4 Ghz network (tried at home, friend's, hotel's, etc.). While at home, my network will go on and off being displayed in my phone. I can select it and enter my password. Then it will say "Connecting..." but nothing will happen. After that it goes in and out of being in range even though I can be adjacent to my router.
5 Ghz works flawlessly
Bootloader is unlocked
Tried multiple JB and KK Cyanogen based ROMs and stock
I am also unable to connect to any device via bluetooth (if that helps at all, probably going to post about this separately later)
I have searched google and multiple forums. The posts nearest to my issue mention a fix for people who formatted their persist folder (I have not, plus I tried copying it anyways) and a fix using a static IP address. No luck.
If anyone has an idea or can provide a fix, I would really appreciate. I am going insane
Thank you.
Click to expand...
Click to collapse
From your Wi-Fi problems, sounds like you're on KK bootloader... are you? (you didn't mention in your post)
Since you're unlocked, try going back to JB bootloader and flash a JBBL based ROM and see if your problem is resolved
rahimali said:
From your Wi-Fi problems, sounds like you're on KK bootloader... are you? (you didn't mention in your post)
Since you're unlocked, try going back to JB bootloader and flash a JBBL based ROM and see if your problem is resolved
Click to expand...
Click to collapse
Sorry, yes KK bootloader. How do I go back to a JB bootloader?
Not sure if using RSD to downgrade changes the bootloader but I did try "Android 4.1.2 Blur_Version.98.30.1.XT907.Verizon.en.US" via http://forum.xda-developers.com/showthread.php?t=2786016
brando9 said:
Sorry, yes KK bootloader. How do I go back to a JB bootloader?
Not sure using RSD to downgrade changes the bootloader but I did try "Android 4.1.2 Blur_Version.98.30.1.XT907.Verizon.en.US" via http://forum.xda-developers.com/showthread.php?t=2786016
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2786016
rahimali said:
http://forum.xda-developers.com/showthread.php?t=2786016
Click to expand...
Click to collapse
Yes, I tried that. Is it worth trying the older firmware too?
brando9 said:
Yes, I tried that. Is it worth trying the older firmware too?
Click to expand...
Click to collapse
thats entirely up to you, i'm happy with what i'm using (in my signature), feel free to try out one of the JB ROMs or one of the JB BL based KitKat ROMs, might like one of them...
No luck with any stock firmware using RSD
brando9 said:
No luck with any stock firmware using RSD
Click to expand...
Click to collapse
I am here man. I will help you for sure
1: download the jellybean FIRMWARE
2: extract is somewhere
3: open XML file with notepad++
4: delete all line which contain GETVAR and OEM
==MUST STEP===
4: also delete the line which contain
GPT.BIN
5: now save it and exit
6: now goto the folder where you extracted the firmware, Now Delete TZ file from folder
--
7: boom it with RSD LITE.
now it will work!! Give a try man!!
livecouk said:
I am here man. I will help you for sure
1: download the jellybean FIRMWARE
2: extract is somewhere
3: open XML file with notepad++
4: delete all line which contain GETVAR and OEM
==MUST STEP===
4: also delete the line which contain
GPT.BIN
5: now save it and exit
6: now goto the folder where you extracted the firmware, Now Delete TZ file from folder
--
7: boom it with RSD LITE.
now it will work!! Give a try man!!
Click to expand...
Click to collapse
Worked! I tried 3 versions but none of them fixed my wifi issue unfortunately. Thanks tho.
brando9 said:
Worked! I tried 3 versions but none of them fixed my wifi issue unfortunately. Thanks tho.
Click to expand...
Click to collapse
No problem have a nice day
Hi guys,
I hope anybody can help me. I'm looking for the latest firmware for my yoga tablet 2 1050L.
It should be YT2-1050L_USR_S100255_1601131716_WW52_ROW. At least that is what the OTA message shows me on my tablet.
After softbricking my tablet (was stuck in lenovo boot logo) when I installed this OTA update (162MB), I was able to recover it with firmware S100192. I checked also for country code and set it new. When I now try to install the OTA update I get an error and can only boot the tablet again and it wants me again to update to the S100255 firmware.
I also looked in the russion lenovo forum (you can translate with google into englsh or my case geman)
http://lenovo-forums.ru/forum/395-yoga-tablet-2-10-%D0%BF%D1%80%D0%BE%D1%88%D0%B8%D0%B2%D0%BA%D0%B8/
But there is the latest firmware I can download S100192.
So I would need either the S100255 firmware to flash it from stock or anybody can give me an hint in how to solve the udpate error
you cannot skip ota's, they are cummulative
ionioni said:
you cannot skip ota's, they are cummulative
Click to expand...
Click to collapse
Hi ionioni,
ok. what do you mean exactly? I don't want to skip it. I want to update it but it's showing error while the update process. and then when I am in Android again it wants me again to update to S100255. So I thought I could flash it with the latest stock rom S100255.
At the moment I try to flash an older stock rom like S100081 or S100225 (and then doing OTA hopefully) but whenever I try to flash it it boots into Android again when it should
C:\Program Files (x86)\Intel\Phone Flash Tool\fastboot.exe" "-S" "500M" "-s" "BaytrailABFF4CD2" "oem" "wipe" "ESP"` command
Iceball24 said:
Hi ionioni,
ok. what do you mean exactly? I don't want to skip it. I want to update it but it's showing error while the update process. and then when I am in Android again it wants me again to update to S100255. So I thought I could flash it with the latest stock rom S100255.
At the moment I try to flash an older stock rom like S100081 or S100225 (and then doing OTA hopefully) but whenever I try to flash it it boots into Android again when it should
C:\Program Files (x86)\Intel\Phone Flash Tool\fastboot.exe" "-S" "500M" "-s" "BaytrailABFF4CD2" "oem" "wipe" "ESP"` command
Click to expand...
Click to collapse
your initial message was a little ambiguos...
before flashing a stock rom go in Contacts and in the search contact box input ####0000# and tell me what he says under BIOS version
ionioni said:
your initial message was a little ambiguos...
before flashing a stock rom go in Contacts and in the search contact box input ####0000# and tell me what he says under BIOS version
Click to expand...
Click to collapse
OK.
Bios version: BLADE_21.X64.0005.R00.1504101447
Iceball24 said:
OK.
Bios version: BLADE_21.X64.0005.R00.1504101447
Click to expand...
Click to collapse
ok, you can flash a lollipop stock rom as you have the matching bios
first uninstall the Intel Phone Flash Tool you have now and install the one from here
then you can install using your stock lollipop rom if you have one or using this (if you download this flash it from DnX mode)
ionioni said:
ok, you can flash a lollipop stock rom as you have the matching bios
first uninstall the Intel Phone Flash Tool you have now and install the one from here
then you can install using your stock lollipop rom if you have one or using this (if you download this flash it from DnX mode)
Click to expand...
Click to collapse
ok, thx. I just downloaded it and try to flash it again. also set the Force fastboot sparsing to 500MB?
ionioni, I receive a crc error when unzipping the rom file....
Iceball24 said:
ok, thx. I just downloaded it and try to flash it again. also set the Force fastboot sparsing to 500MB?
Click to expand...
Click to collapse
if you use the rom i linked no need for additional settings (the sparse is in the xml already), just flash
---------- Post added at 16:19 ---------- Previous post was at 15:48 ----------
Iceball24 said:
ionioni, I receive a crc error when unzipping the rom file....
Click to expand...
Click to collapse
i just downloaded (i used the germany server as is closer to me and had some 10-12 MB/s) and it tested ok when unzipping
ionioni said:
if you use the rom i linked no need for additional settings (the sparse is in the xml already), just flash
---------- Post added at 16:19 ---------- Previous post was at 15:48 ----------
i just downloaded (i used the germany server as is closer to me and had some 10-12 MB/s) and it tested ok when unzipping
Click to expand...
Click to collapse
I downloaded it now from 3 servers and always get the CRC error. which program do you use? winrar. 7zip and which version?
Iceball24 said:
I downloaded it now from 3 servers and always get the CRC error. which program do you use? winrar. 7zip and which version?
Click to expand...
Click to collapse
the zip was made with winrar 5.xx (don't recall exactly the subversion)
ionioni said:
the zip was made with winrar 5.xx (don't recall exactly the subversion)
Click to expand...
Click to collapse
OK, I don't know why but it seems to be a problem within my office. I downloaded it at home and there I have no CRC issues.....
I will try to flash tomorrow than and hope it works. DnX mode is booting with both volume buttons into fastboot, right?
Iceball24 said:
OK, I don't know why but it seems to be a problem within my office. I downloaded it at home and there I have no CRC issues.....
I will try to flash tomorrow than and hope it works. DnX mode is booting with both volume buttons into fastboot, right?
Click to expand...
Click to collapse
yes, both vols pressed while powering on, screen will hang on 'fastboot starting...' message
ionioni said:
yes, both vols pressed while powering on, screen will hang on 'fastboot starting...' message
Click to expand...
Click to collapse
Ok, now I was finally (!) able to flash it and to boot it into android. Strange issue when I extracted your zip file on my HDDs on my company's notebook I got a zip CRC error. I unzipped it now directly on my USB drive (connected to my company laptop) to my external HDD and I had no issues. Only the devil knows why...???!
So after using your phone flash tool lite version 5.3.4.1 it worked now. I'm just downloading now the next OTA update over WLAN to version S100192. after that version S100255 should appear. let's see what happens Thank you so far.
Iceball24 said:
Ok, now I was finally (!) able to flash it and to boot it into android. Strange issue when I extracted your zip file on my HDDs on my company's notebook I got a zip CRC error. I unzipped it now directly on my USB drive (connected to my company laptop) to my external HDD and I had no issues. Only the devil knows why...???!
So after using your phone flash tool lite version 5.3.4.1 it worked now. I'm just downloading now the next OTA update over WLAN to version S100192. after that version S100255 should appear. let's see what happens Thank you so far.
Click to expand...
Click to collapse
maybe the hdd is near his EOL or maybe you have there some strange firewall? you should check as this sounds really odd
ionioni said:
maybe the hdd is near his EOL or maybe you have there some strange firewall? you should check as this sounds really odd
Click to expand...
Click to collapse
no don't think it's EOL as it was on both my harddisks and I have no problems with other files. Don't bother anymore.
Good news: was able to flash and update it OTA to the current Firmware S100256 (14MB) which has been released as there may have been some bugs to the S100255. and it works! Thank you very much! :silly::silly::good::good::good:
Hi Ionioni.
Sorry for bothering you, but I have same problem as Iceball24. Could you tell me what should be the settings for Phone Flash Tool to flash yoga properly?
Iceball24 said:
no don't think it's EOL as it was on both my harddisks and I have no problems with other files. Don't bother anymore.
Good news: was able to flash and update it OTA to the current Firmware S100256 (14MB) which has been released as there may have been some bugs to the S100255. and it works! Thank you very much! :silly::silly::good::good::good:
Click to expand...
Click to collapse
Good!
sanguine13 said:
Hi Ionioni.
Sorry for bothering you, but I have same problem as Iceball24. Could you tell me what should be the settings for Phone Flash Tool to flash yoga properly?
Click to expand...
Click to collapse
no settings
sanguine13 said:
Hi Ionioni.
Sorry for bothering you, but I have same problem as Iceball24. Could you tell me what should be the settings for Phone Flash Tool to flash yoga properly?
Click to expand...
Click to collapse
Maybe this can help you:
Make sure you use the latest Phone Flash tool (lite) which was 5.3.4.1 for me. Make sure you use a USB port at your laptop PC, don't use a hub (did not work for me). And If you are not able to flash it via the DnX mode (press both Volumen buttons and power on the tab) then try using the Fastboot mode in the bootloader (volume down and power on the tab).
Iceball24 said:
Maybe this can help you:
Make sure you use the latest Phone Flash tool (lite) which was 5.3.4.1 for me. Make sure you use a USB port at your laptop PC, don't use a hub (did not work for me). And If you are not able to flash it via the DnX mode (press both Volumen buttons and power on the tab) then try using the Fastboot mode in the bootloader (volume down and power on the tab).
Click to expand...
Click to collapse
Thank you.
Everything went very good. I downloaded linked Phone Tool and stock rom and flashed Yoga through Fastboot. Now my Yoga is updated
ionioni said:
Good!
no settings
Click to expand...
Click to collapse
Hi ionioni,
I'm back with a further problem. I just tried to start teamviewer on the yoga. I get an error that the firmware may be faulty and I should check for a proper IMEI. So I put in a SIM card (which I have used in anther phone) and I'm able to unlock it with the pin. But I get no data connection and also when I try to set a new PIN for the SIM card in the security settings I enter the PIN and it says wrong PIN I have 3 more trys. but I can try it as often as I want, it does not lock the SIM card.
So what may be the problem? any ideas?
UPDATE: Ok, just checked my IMEI online and it appears to be an IPHONE IMEI??
Update 2: Under settings, network, more, mobile connection (? just know the german word for the settings) I can not choose the menu as it is deactivated and grey. I just read that the tablet may think it is in flight mode?
Hi guys,
Does anyone have or know of any different lists for modems and radios that can be flashed through TWRP?
Does CM13 have a radio bug where signal is weaker than on OOS?
RashidD said:
Hi guys,
Does anyone have or know of any different lists for modems and radios that can be flashed through TWRP?
Does CM13 have a radio bug where signal is weaker than on OOS?
Click to expand...
Click to collapse
Yes radio on CM13 is weaker than OOS. I don't know which one we are using. Is that in BaseBand Version?
saurabh40629 said:
Yes radio on CM13 is weaker than OOS. I don't know which one we are using. Is that in BaseBand Version?
Click to expand...
Click to collapse
I think it shows up in your fastboot screen...
RashidD said:
I think it shows up in your fastboot screen...
Click to expand...
Click to collapse
Do you know how we can extract it from OOS?
Sadly I don't. But I have an idea how someone might be able to... There is an app on the Play Store called Partitons Backup & Restore... If you can use the app to backup or download the modem that would be a start
@RJDTWO @ashwin007 @MasterAwesome would you guys be able to help us do this? To make a flashable zip of the OOS stock rom modem/ radio?
I think the modem is the same in both oos and cm13 guys.
Obviously something isn't playing nice software wise but I don't think this actually affects battery life. Just shows incorrect reading.
I think I have some lead on that. There are 2 ways to extract modem from oos .Since there is only one stock zip irrespective of country, so I don't think it contains modem, hence getting modem.bin may not work.
Anyway, we can extract it via below command
Code:
dd if=/dev/block/mmcblk0p8 of=/sdcard/modem.bin bs=4096
it should put modem.bin in your internal storage.
Note I can not verify if above command is correct. Probably someone with more dev experience can confirm it.:
the flash using below command in fastboot
Code:
fastboot flash modem modem.bin
ok, so I found the solution for bad network connectivity. I downloaded full stock ROM and extracted it. Took NON-HLOS.bin from and flashed it via fastboot. Now , I have continuos green signal in battery graph.
Code:
fastboot flash modem NON-HLOS.bin
Link for modem afh
saurabh40629 said:
ok, so I found the solution for bad network connectivity. I downloaded full stock ROM and extracted it. Took NON-HLOS.bin from and flashed it via fastboot. Now , I have continuos green signal in battery graph.
Code:
fastboot flash modem NON-HLOS.bin
Let me know if anyone wants it, I will upload it.
Click to expand...
Click to collapse
I would like to know if then I can restore the baseband after flashing this one and btw can you upload it pls thanks :good:
Nexx_ said:
I would like to know if then I can restore the baseband after flashing this one and btw can you upload it pls thanks :good:
Click to expand...
Click to collapse
Have a backup before flashing this. If you clean flash or wipe system, it will be gone. So there are no harms. I will add link to previous post.
Amazing work! I will fastboot flash this and try.
I flashed it via Fastboot but It didn't affect the radio reception. Will try again tomorrow. The red circle is when I flashed it. Thank you for the work !
I also flashed this around 6pm then reset my battery status but so far no effect I'll wait till tomorrow to see how it is.
Sent from my ONE E1005 using XDA-Developers mobile app
Nexx_ said:
I flashed it via Fastboot but It didn't affect the radio reception. Will try again tomorrow. The red circle is when I flashed it. Thank you for the work !
Click to expand...
Click to collapse
ArmStrongDickPunch said:
I also flashed this around 6pm then reset my battery status but so far no effect I'll wait till tomorrow to see how it is.
Click to expand...
Click to collapse
Yes, you are right. I had good reception for 2 hours, then I flashed latest nightly and modem, but then it was not all green line. So may be it was just a placebo effect.
Here is my further analysis -->
None of the ROM contains any modem, so if you have ever updated to 2.2.1-x, you already have the latest modem. There is no chance of getting modem overwritten unless you explicitly do that.
I checked flash script of oos and cm13 and saw that cm3 is not making any changes in radio, modem blocks.Just to check, I manually flashed individual partition from oos stock zip except system and boot, and still it did not make any difference.
It appears that it may be a face representation in MM that cell reception seems weaker (as yellow line). I have seen this on various device forums where they have mix of yellow/green line for cell reception. So unless oneplus updates modem for marshmallow, I guess it will be like this.
From my findings, there is only one modem for each variation of the one plus x. So if you've ran Oos in the past, you'll have the latest modem.
I'm not sure why but I recorded slightly better battery life than before. Maybe half an hour more SOT and a couple of hours standby.
saurabh40629 said:
ok, so I found the solution for bad network connectivity. I downloaded full stock ROM and extracted it. Took NON-HLOS.bin from and flashed it via fastboot. Now , I have continuos green signal in battery graph.
Click to expand...
Click to collapse
did it affect the battery life ?
karmacoma7 said:
did it affect the battery life ?
Click to expand...
Click to collapse
I don't know, read above post. If it didn't make any difference in cellular connectivity, i don't think it will improve battery.
saurabh40629 said:
ok, so I found the solution for bad network connectivity. I downloaded full stock ROM and extracted it. Took NON-HLOS.bin from and flashed it via fastboot. Now , I have continuos green signal in battery graph.
Code:
fastboot flash modem NON-HLOS.bin
Link for modem afh
Click to expand...
Click to collapse
is that the modem from 2.2.1-x?
Hey guys,
I will personally look into creating a flashable zip from 2.2.1-x. Give me awhile
Hi there,
Can anyone please upload the full firmware with the June security update?
I'm having problem while flashing this firmware.
Facing error something like this in fastboot,
(bootloader) Downgrade Security update.
Previously I had installed AOSPEX. And forgot to turn on the USB Debugging before flashing the stock firmware.
Please help.
Hello
Hi ,
I am also facing the same problem.Is your phone bricked?
keyur1131 said:
Please help.
Click to expand...
Click to collapse
Don't try to update the bootloader or the partition table (GPT). Skip those commands. The flash will work fine.
zeomal said:
Don't try to update the bootloader or the partition table (GPT). Skip those commands. The flash will work fine.
Click to expand...
Click to collapse
Yes flash worked but,
Problems I'm facing,
1. Whenever I restart device, It starts in bootloader and then I have to press start.
2. Because of the above issue, System Updates are are not being installed.(14-4 build is installing again and again)
3. Wifi and Hotspot is not working.(cannot connect to any WiFi network and others cannot see my hotspot)
Supersteam said:
Hi ,
I am also facing the same problem.Is your phone bricked?
Click to expand...
Click to collapse
Nope. It's working. But facing above issues.
Hi
keyur1131 said:
Nope. It's working. But facing above issues.
Click to expand...
Click to collapse
Try this:
https://forum.xda-developers.com/showpost.php?p=72980135&postcount=55
keyur1131 said:
Yes flash worked but,
Problems I'm facing,
1. Whenever I restart device, It starts in bootloader and then I have to press start.
2. Because of the above issue, System Updates are are not being installed.(14-4 build is installing again and again)
3. Wifi and Hotspot is not working.(cannot connect to any WiFi network and others cannot see my hotspot)
Click to expand...
Click to collapse
For 1) you could try:
Boot your device into the bootloader.
Connect your device to your computer
In the adb terminal, type 'fastboot oem fb_mode_clear' without the quotes. This should clear the booting to fastboot.
Reboot and test.
As for a stock June firmware, we'll have to wait for Motorola to build the firmware (and then for a way to 'acquire' it)
echo92 said:
For 1) you could try:
Boot your device into the bootloader.
Connect your device to your computer
In the adb terminal, type 'fastboot oem fb_mode_clear' without the quotes. This should clear the booting to fastboot.
Reboot and test.
As for a stock June firmware, we'll have to wait for Motorola to build the firmware (and then for a way to 'acquire' it)
Click to expand...
Click to collapse
+1 - Thanks, 'fastboot oem fb_mode_clear' worked.
Do you know the reason behind my WiFi and hotspot issue?
Try this command to flash the Stock Rom
keyur1131 said:
+1 - Thanks, 'fastboot oem fb_mode_clear' worked.
Do you know the reason behind my WiFi and hotspot issue?
Click to expand...
Click to collapse
*Download and extract it to your Stock Rom folder.
*Run this bat file
*wait till it finishes
*I hope this will fix the bugs
Supersteam said:
*Download and extract it to your Stock Rom folder.
*Run this bat file
*wait till it finishes
*I hope this will fix the bugs
Click to expand...
Click to collapse
+1 - Worked like a charm. Thank You. :good:
keyur1131 said:
+1 - Worked like a charm. Thank You. :good:
Click to expand...
Click to collapse
You're welcome:victory::victory:
After installing RR, restore the original firmware of Xiaomi Mi A1, the problem is that no longer stable wifi connection, find networks but do not connect, try everything and there is no way to connect to a Wi-Fi network.
There is someone who has happened to him this before.
speedunderx said:
After installing lineageOS 15, restore the original firmware of Xiaomi Mi A1, the problem is that no longer stable wifi connection, find networks but do not connect, try everything and there is no way to connect to a Wi-Fi network.
There is someone who has happened to him this before.
Click to expand...
Click to collapse
yeah me too
---------- Post added at 06:21 AM ---------- Previous post was at 06:17 AM ----------
what to do,,some body Help please,is that going to Mi Service Center Is the Last Option ?
DebGourav said:
yeah me too
---------- Post added at 06:21 AM ---------- Previous post was at 06:17 AM ----------
what to do,,some body Help please,is that going to Mi Service Center Is the Last Option ?
Click to expand...
Click to collapse
I imagine that soon they will solve it, since the same thing is happening to many of them, what you can do for now is to install RR once again, since Wi-Fi works there.
same issue facing..
speedunderx said:
I imagine that soon they will solve it, since the same thing is happening to many of them, what you can do for now is to install RR once again, since Wi-Fi works there.
Click to expand...
Click to collapse
bhuvneshkapoor01 said:
same issue facing..
Click to expand...
Click to collapse
i flashed RR and went back and wifi doesnt work says its desabled, regreat my actions need a fix for this tho
Don't know what kind of bug is this, i flashed 7.1.2 and almost 3-5 firmare, still no luck. went back to RR.
Nautilus99 said:
i flashed RR and went back and wifi doesnt work says its desabled, regreat my actions need a fix for this tho
Click to expand...
Click to collapse
bhuvneshkapoor01 said:
Don't know what kind of bug is this, i flashed 7.1.2 and almost 3-5 firmare, still no luck. went back to RR.
Click to expand...
Click to collapse
gess we are stuck untill oficial 8.1
Nautilus99 said:
gess we are stuck untill oficial 8.1
Click to expand...
Click to collapse
Someone has tried installing an older version of RR, since in the last compilations made changes in the registry of the MAC of Wifi and difinitivamente is that the problem.
Take the following test,
* Install the latest Oreo Stock Firmware
* Download Kernel Meta Phoenix
* TWRP Boot & Install Kernel Meta Phoenix
See if WIFI works
https://forum.xda-developers.com/mi-a1/development/kernel-meta-phoenix-r1-t3768080
speedunderx said:
Take the following test,
* Install the latest Oreo Stock Firmware
* Download Kernel Meta Phoenix
* TWRP Boot & Install Kernel Meta Phoenix
See if WIFI works
https://forum.xda-developers.com/mi-a1/development/kernel-meta-phoenix-r1-t3768080
Click to expand...
Click to collapse
I just tried it and it does not work, after installing the kernel it does not recognize the mac on the device
I tried with scooti stock rom , and it works. but for orignal stock rom it didn't work. thanks mate.
speedunderx said:
Take the following test,
* Install the latest Oreo Stock Firmware
* Download Kernel Meta Phoenix
* TWRP Boot & Install Kernel Meta Phoenix
See if WIFI works
https://forum.xda-developers.com/mi-a1/development/kernel-meta-phoenix-r1-t3768080
Click to expand...
Click to collapse
RR is full of bugs. i flashed it too and i have the same problem. Tried reflashing stock nogut, latest oreo both (with full wipe including internal storage). none solved the problem. please post it if u find a fix.
sachin273 said:
RR is full of bugs. i flashed it too and i have the same problem. Tried reflashing stock nogut, latest oreo both (with full wipe including internal storage). none solved the problem. please post it if u find a fix.
Click to expand...
Click to collapse
We are in the same, I probe everything and there is no way to start the Wi-Fi with stock, hopefully some solution comes out soon, for now I stay in RR since there works the wifi.
I fixed flashing persist.img again on fastboot.
gsnmartinh said:
I fixed flashing persist.img again on fastboot.
Click to expand...
Click to collapse
Please share the procedure, how to flash persist.img
Well, just find persist.img in the stock file like C:\Users\memo\Desktop\tissot_images_V9.5.9.0.ODHMIFA_8.0\images
then turn off your phone and enter into fastboot mode (down volume + power)
connect the phone to pc
the search for cmd
write : fastboot devices and if it shows number it means that is connect
then write: fastboot oem unlock (to unlock bootloader)
fastboot flash persist and grab the file and push it to the cmd
it should be end like this: C:\Users\memo>fastboot flash persist C:\Users\memo\Desktop\tissot_images_V9.5.9.0.ODHMIFA_8.0\images\persist.img
sorry if i haven't explain myself, i'm not a native english speaker.
GOOD LUCK
gsnmartinh said:
Well, just find persist.img in the stock file like C:\Users\memo\Desktop\tissot_images_V9.5.9.0.ODHMIFA_8.0\images
then turn off your phone and enter into fastboot mode (down volume + power)
connect the phone to pc
the search for cmd
write : fastboot devices and if it shows number it means that is connect
then write: fastboot oem unlock (to unlock bootloader)
fastboot flash persist and grab the file and push it to the cmd
it should be end like this: C:\Users\memo>fastboot flash persist C:\Users\memo\Desktop\tissot_images_V9.5.9.0.ODHMIFA_8.0\images\persist.img
sorry if i haven't explain myself, i'm not a native english speaker.
GOOD LUCK
Click to expand...
Click to collapse
I tried with MetaPhoenix Kernel, and its working fine for me, one thing of this is best in the market, almost everytime 1.6Gb ram free, and stability and features are great. Thanks mate for the guide.
I do not speak English, but thanks to this page I was able to solve the problem. It's a persist.img that worked for me: D
xiaomifirmware com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1
gsnmartinh said:
fastboot flash persist and grab the file and push it to the cmd
it should be end like this: C:\Users\memo>fastboot flash persist C:\Users\memo\Desktop\tissot_images_V9.5.9.0.ODHMIFA_8.0\images\persist.img
sorry if i haven't explain myself, i'm not a native english speaker.
GOOD LUCK
Click to expand...
Click to collapse
i am on stock nougat now so i tried flashing nougat persist image through cmd. but it says failed-this image doesnt allow download
does that method from the site work??
https://xiaomifirmware.com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1/
i need to know if i flash latest stock rom with the persist the sit is giving will it work? i miss the stock...