i pressed step 3 and all the command windows closed and my v20 rebooted. However it is stuck on the verizon loading logo. Any one know how to fix?
jccspeed said:
i pressed step 3 and all the command windows closed and my v20 rebooted. However it is stuck on the verizon loading logo. Any one know how to fix?
Click to expand...
Click to collapse
You didn't read the guide.
me2151 said:
You didn't read the guide.
Click to expand...
Click to collapse
I don't get what I did wrong. And when I said the command windows closed I meant step3 ran through and when it finished it closed out all of the existing command prompts including the runmefirst prompt and then the V20 got stuck into the Verizon logo.
me2151 said:
You didn't read the guide.
Click to expand...
Click to collapse
I actually just browsed the guide so I could point him towards the part where you discuss flashing "boot2.img" and I didnt see it. Did you remove it?
jccspeed said:
I don't get what I did wrong. And when I said the command windows closed I meant step3 ran through and when it finished it closed out all of the existing command prompts including the runmefirst prompt and then the V20 got stuck into the Verizon logo.
Click to expand...
Click to collapse
See below.
bond32 said:
I actually just browsed the guide so I could point him towards the part where you discuss flashing "boot2.img" and I didnt see it. Did you remove it?
Click to expand...
Click to collapse
me2151 said:
5) During reboot you will get a Red Triangle with a "!" inside, this is normal (First boot after flashing SuperSu will show the Red triangle twice.Wait for system to boot (this will take awhile). It may appear like the system has frozen but it has not. JUST WAIT!
*****VERIZON USERS******
It has come to my attention that some users have encountered abnormally long first boot time(over 20 minutes before first time setup)
To resolve this issue:
Boot into bootloader by pulling the battery and reinserting it and holding VOL- and phugging in the phone. then typing:
Code:
fastboot flash boot boot2.img
fastboot reboot
**************
Click to expand...
Click to collapse
Wasn't removed
I swear I looked at that like 20 times. I'm getting too freaking old, sorry!
bond32 said:
I swear I looked at that like 20 times. I'm getting too freaking old, sorry!
Click to expand...
Click to collapse
me2151 said:
See below.
Wasn't removed
Click to expand...
Click to collapse
Well ive seen that but where would i type in this command. I also wasn't at the point where i flash supersu because it wouldnt boot to twrp
that command is from fastboot(bootloader)
jccspeed said:
Well ive seen that but where would i type in this command. I also wasn't at the point where i flash supersu because it wouldnt boot to twrp
Click to expand...
Click to collapse
and yes im sorta a noob (only rooted a g3 before) but what is and where would my "active adb directory be
me2151 said:
that command is from fastboot(bootloader)
Click to expand...
Click to collapse
sorry if i sound like an idiot but how do i type that into the bootloader
me2151 said:
See below.
Wasn't removed
Click to expand...
Click to collapse
i did this after trying root the second time. It said could not load boot2 and when i rebooted it it is still not booting up
jccspeed said:
and yes im sorta a noob (only rooted a g3 before) but what is and where would my "active adb directory be
Click to expand...
Click to collapse
Did you get it working? I asked the same thing.. Pm if do so you. Can walk my butt through it..please
d73jester said:
Did you get it working? I asked the same thing.. Pm if do so you. Can walk my butt through it..please
Click to expand...
Click to collapse
well i learned where the active adb directory is (C:\adb) and i moved everything there but my phone bootlooped on the same part. For some reason the people who know how to do this are being irritating and giving very vague answers. If you find out how to fix then pm me cuz im probably going to stop trying until a new method is released by a nicer dev
jccspeed said:
well i learned where the active adb directory is (C:\adb) and i moved everything there but my phone bootlooped on the same part. For some reason the people who know how to do this are being irritating and giving very vague answers. If you find out how to fix then pm me cuz im probably going to stop trying until a new method is released by a nicer dev
Click to expand...
Click to collapse
I got stuck on the 3rd step too man. I left it overnight hoping it would finally start up only to wake up and find it still vibrating. What I ended up doing was flashing the NRD 90M Modded not so stock ROM and was finally able to get my phone to boot up after 5min and it has been working great since. Heres the link. https://forum.xda-developers.com/v20/development/vs995-vzw-nrd90m-modded-notsostock-rom-t3525864
viper_1315 said:
I got stuck on the 3rd step too man. I left it overnight hoping it would finally start up only to wake up and find it still vibrating. What I ended up doing was flashing the NRD 90M Modded not so stock ROM and was finally able to get my phone to boot up after 5min and it has been working great since. Heres the link. https://forum.xda-developers.com/v20/development/vs995-vzw-nrd90m-modded-notsostock-rom-t3525864
Click to expand...
Click to collapse
how did you manage to flash it if it was stuck on the verizon logo?
jccspeed said:
well i learned where the active adb directory is (C:\adb) and i moved everything there but my phone bootlooped on the same part. For some reason the people who know how to do this are being irritating and giving very vague answers. If you find out how to fix then pm me cuz im probably going to stop trying until a new method is released by a nicer dev
Click to expand...
Click to collapse
I wasn't really being vague. I told you exactly what you needed to do. Another method isn't coming out any time soon. And the reason why I may not seem "Nice" is because people don't know how to read a thread through where stuff like this IS ALREADY ANSWERED MULTIPLE TIMES. If you don't even know how to input commands through fastboot(bootloader) you really should NOT have tried this. Thats why I stopped posting replies to you. Im sorry but just read the thread...
me2151 said:
I wasn't really being vague. I told you exactly what you needed to do. Another method isn't coming out any time soon. And the reason why I may not seem "Nice" is because people don't know how to read a thread through where stuff like this IS ALREADY ANSWERED MULTIPLE TIMES. If you don't even know how to input commands through fastboot(bootloader) you really should NOT have tried this. Thats why I stopped posting replies to you. Im sorry but just read the thread...
Click to expand...
Click to collapse
yea i know how to input bootloader commands now sorry about that i was being a little slow. I just wanna know if i could flash boot2 cuz on the op it only says to do that after it goes into twrp and i flash supersu then if it gets stuck in boot. Mine got stuck when it was rebooting before i could put the adb reboot recovery thing. So i just want to know if i can do the boot2 command before flashing supersu or if i can just reboot to recovery and flash a rom? Sorry for being rude I was just irritated in failing to root.
At this point you can just install roms. The boot2.img is mainly for first boot situations after the bootloader flashing.
jccspeed said:
how did you manage to flash it if it was stuck on the verizon logo?
Click to expand...
Click to collapse
What I did is went back to step 3, the step on how to install TWRP, put the rom on an sd card and then flash from there.
Related
hello!
does anyone can help ?
after trying to upgreade radio rom , it respring/reload and stock on this screen
I have no idea how can I help stand up my phone on foot
This message was deleted by its author
if you look at the picture, it is actually unlocked. there is a picture of an open lock there. anyways... go into recovery, wipe data(factory reset) the phone, then reupdate the rom.
I find this a tad bit amusing.
Gimpeh said:
I find this a tad bit amusing.
Click to expand...
Click to collapse
lol, i do to! but, sometimes we have to have a little patience. we all were noobs once(except i dont remember being this much a noob )
it is strange becouse i can not run Superboot,root file on it
when I was trying to type using cammand line "instal-superboot-windows.bat" it did nothing
then I was try to upgreade radio rom and it locked
i am beginer
check out this link.... http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Nexus_One_Firmware_to_CyanogenMod
I hosted another screen in first post
This message was deleted by its author
youre in fastboot and it shows that you already unlocked the bootloader. just flash amon ra recovery v1.5.3 then whichever rom you want. be aware that you might also have to flash the google apps add-on with some roms.
there is a thread here on xda for beginers. i suggest you start posting there. this is a developement section. this thread will also probably be closed shortly.
nowy57 said:
it is strange becouse i can not run Superboot,root file on it
when I was trying to type using cammand line "instal-superboot-windows.bat" it did nothing
then I was try to upgreade radio rom and it locked
i am beginer
Click to expand...
Click to collapse
Pretty sure you just need to run the .bat file from Windows and it automatically unlocks the bootloader and roots the phone. Correct me if I'm wrong on the last part of my sentence, but I know you can't flash a bat file on your phone.
simms22 said:
lol, i do to! but, sometimes we have to have a little patience. we all were noobs once(except i dont remember being this much a noob )
Click to expand...
Click to collapse
lmao... thats because some of us did research and studied everything that was needed before doing it, so if there was an issue it was serious
LOL i never rooted an android, my nexus is my first android. im not thinking rooting. but i glanced at the tutorials before and even I know that screen shot means you have a unlocked bootloader
uansari1 said:
Pretty sure you just need to run the .bat file from Windows and it automatically unlocks the bootloader and roots the phone. Correct me if I'm wrong on the last part of my sentence, but I know you can't flash a bat file on your phone.
Click to expand...
Click to collapse
exactly
when I clicked on "instal-superboot-windows.bat" black screen shows on second and do nothing on my phone ..
maktucali said:
LOL i never rooted an android, my nexus is my first android. im not thinking rooting. but i glanced at the tutorials before and even I know that screen shot means you have a unlocked bootloader
Click to expand...
Click to collapse
if u have SDK and drivers setup you dont have to be rooted to do screenshots in DDMS
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Arun01 said:
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Motorola published the factory files for Xoom awhile back so if you still have fastboot, you can recover from it.
http://developer.motorola.com/produ...utm_source=supportforums&utm_term=unlockboard
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Stop using one click crap. If you don't know what you're then you should not be messing with your device.
Sent from my DROIDX using XDA App
I can. Just won't.
Arun01 said:
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Click to expand...
Click to collapse
Type oem unlock again and then flash the stock images...youll be good to go...also there are really good stickies in here that help..pleasedont forget to search before starting a new thread.
albundy2010 said:
I can. Just won't.
Click to expand...
Click to collapse
And this is rude and uncalled for
The OP stated he read quides etc and none of it made sense to him etc. So instead of asking for help a explanation he tries a one click method. Which is stupid. He than softbricks the device and asked for help here.
Then he is told that moto released the factory images and use fastboot if he still has it to recover the device. He then decides to ignore that entirely and go back and try to unroot/restore with the one click BS again. Then he tries to use it again to go back to where he was. Just flat out stupid. He did something when he had no idea wtf he was doing. Was told what to do. Did not do it. He even said it is like Chinese to him.
So I told him to stop messing with one click crap. Which is correct. I told him to stop messing with the ****ing thing. Which is also correct. He needs to learn/understand wtf he is doing. Instead of basically button mashing/trying crap and hoping it will basically fix itself.
On top of that this posted in the wrong section. Uncalled for my ass. He is the one that was rude when told to not mess with the one click or the device. Now this part is rude. **** his stupid ass.
csseale said:
Type oem unlock again and then flash the stock images...youll be good to go...also there are really good stickies in here that help..pleasedont forget to search before starting a new thread.
Click to expand...
Click to collapse
How do i get to that ..and where do i type it at ..i looked in device manager & does recognize the xoom..it says "Motorola USB Device:Motorola Flash Interface"..In properties under "Driver" it has options for driver details..update driver..disable & uninstall.Can i do anything with them?
I tried opening SDK manager but it never lets me type anything in the box as it's always trying to do some kind of update in another window so when i close the window it closes all of the windows.
Sent from my DROIDX using XDA App
Arun01 said:
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
If they didnt make sense to you in the first place you probably shoud not be attempting to root... U went straight to an old method that even the developer has marked in hs thread can full brick you and should not be used. The xoom costs like 600 bucks... Why wouldnt you do extensive research on how to root? If you did not understand the terms why didn't you research the methods and learn it?
I hope you can flash the factory imagines back through fastboot and adb, but i just do not understand why people attempt this stuff when they have no idea what the terms even mean...
You need to have sdk, hook up to usb on your computer, and follow one of the unlock guides posted on this site... A real one using adb... Then you need to follow a root one...
Sorry that is not more helpful, but half of this experience is that you need to learn what you are doing and the instructions are out there. If they do not make sense at this point im afraid you are stuck. Now the way your device is you have to figure it out...
Arun01 said:
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Click to expand...
Click to collapse
Please check out this thread.It is called Root heaven for a reason. Just about every viable rooting guide, all the files and explanations you will need are here.
http://forum.xda-developers.com/showthread.php?t=1209341
I urge you to just calm down, read about what is the sdk, what is adb, how to recover from a soft brick and so on. The xda xoom forum is all about learning and teaching. We were all noobies once. The Xoom is a very complex device with many models and vesions and one clicks just don't cut it. There are rooting methods that are relatively simple but you really need to be prepared before you get started.
Good luck and don't despair. You'll get there.
Thanks for the help guys.I'm reading through all of the threads and i see a typo in a post that in the command window would've never let me find the sdk tools on my c drive. But after i retyped it i did it & a bunch of writing came up. Trying to figure out now how to flash the stock images to the xoom.
Sent from my DROIDX using XDA App
Arun01 said:
Thanks for the help guys.I'm reading through all of the threads and i see a typo in a post that in the command window would've never let me find the sdk tools on my c drive. But after i retyped it i did it & a bunch of writing came up. Trying to figure out now how to flash the stock images to the xoom.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
at first, make sure you install android sdk correctly. then go to android sdk-folder in your computer, u will find a folder named platform-tool. Press shift+ right click on it, then choose open command window here. After that, type in "adb devices" or "fastboot devives" to check if your xoom is connected. If yes,you good to go. If no, check your android sdk installed process
After i type in abd devices it says list of devices attached but shows nothing..i did copy the sdk tools folder to the c drive like i was told.
@OP
If you can't do it yourself, getting somebody to help you (in person) is always an option. If you live in a major city, advertise on Craigslist or some equivalent. Offer $50 for debricking + some tutorial.
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
albundy2010 said:
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
Click to expand...
Click to collapse
That's good advice...no reason to re-lock. But get back to square one so that you're functional and then when you're ready to try again, do it the right way.
Again, good luck!
albundy2010 said:
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
Click to expand...
Click to collapse
Thanks a lot.I was able to unlock it then it rebooted & stopped at the Motorola screen then i started the 1st command: fastboot flash boot boot.img & it says waiting on device..but nothing happens so far.Should i move on to the next step or retry?
Can someone help me get into bootloader? I was able to get into it perfectly fine up until the point where I followed efrant steps to do a factory reset and I flashed TWRP 2.6.1.0 now, I can't even get into the bootloader holding the down volume key and power key
can u get into recovery?if not does the phone even turns on?if u can get into recovery just do "adb reboot bootloader"(this work also while android is running/booting).
opssemnik said:
can u get into recovery?if not does the phone even turns on?if u can get into recovery just do "adb reboot bootloader"(this work also while android is running/booting).
Click to expand...
Click to collapse
After a few attempts (as in more than 10) it finally managed to boot into bootloader.
Thanks for helping out
texaslittleangel said:
After a few attempts (as in more than 10) it finally managed to boot into bootloader.
Thanks for helping out
Click to expand...
Click to collapse
so you went the factory img route i see
simms22 said:
so you went the factory img route i see
Click to expand...
Click to collapse
yup
I think i could have pulled out the file I needed had I read yesterday afternoon about Wugs' tool. It says it can pull files (having the phone with debugging on, which I did).... You live you learn
Out of sheer spite, I am off to the Nutcracker market
@simms22 you were awesome. Thanks again for your help and patience.
texaslittleangel said:
yup
I think i could have pulled out the file I needed had I read yesterday afternoon about Wugs' tool. It says it can pull files (having the phone with debugging on, which I did).... You live you learn
Out of sheer spite, I am off to the Nutcracker market
@simms22 you were awesome. Thanks again for your help and patience.
Click to expand...
Click to collapse
nutcracker market? sounds like fun! at least it sounds christmasy
I cant seem to get out of TWRP. I use adb and i used "adb boot recovery" and i cant seem to get out. The issue i think i have is that the adb keeps pushing the command to the phone. Now before you say "Just unplug the phone and reboot it"... I did that. Now it seems that the code is stuck with the phone . Iv tried to put it into TWRP my self without adw and tryed to reboot it but that didnt work. No other tread helped me. If you could tell me how to how to fix this or link me to a thread somewhere else. Its a Verizon phone.
Thanks -
Subby
if it helps: I was trying to root :good:
Shubbyshak said:
I cant seem to get out of TWRP. I use adb and i used "adb boot recovery" and i cant seem to get out. The issue i think i have is that the adb keeps pushing the command to the phone. Now before you say "Just unplug the phone and reboot it"... I did that. Now it seems that the code is stuck with the phone . Iv tried to put it into TWRP my self without adw and tryed to reboot it but that didnt work. No other tread helped me. If you could tell me how to how to fix this or link me to a thread somewhere else. Its a Verizon phone.
Thanks -
Subby
if it helps: I was trying to root :good:
Click to expand...
Click to collapse
I got the phone to RAM dump boot i have no idea how i got it there. But its something else. THE PHONE IS NOT BRICKED.
So you're stuck in recovery??? If so, just flash one of the Verizon based roms that should get you going.
indoz said:
So you're stuck in recovery??? If so, just flash one of the Verizon based roms that should get you going.
Click to expand...
Click to collapse
Thanks but i got out of it. I think it was because i tried to root is so the microsd got corrupted because the rooting process screwed up
Thanks -
Shubb
Shubbyshak said:
I cant seem to get out of TWRP. I use adb and i used "adb boot recovery" and i cant seem to get out. The issue i think i have is that the adb keeps pushing the command to the phone. Now before you say "Just unplug the phone and reboot it"... I did that. Now it seems that the code is stuck with the phone . Iv tried to put it into TWRP my self without adw and tryed to reboot it but that didnt work. No other tread helped me. If you could tell me how to how to fix this or link me to a thread somewhere else. Its a Verizon phone.
Thanks -
Subby
if it helps: I was trying to root :good:
Click to expand...
Click to collapse
This happened to me. I just had to use the hardware buttons to boot into recovery then reboot from there and that got me out of the loop. Not sure why that happens.
Trying to get my V20 rooted I figured since it's been awhile I'd try and ask hopping not to get my head ripped off about rooting this beast. I would greatly appreciate some help. Tried in the past failed miserably.
ice5192 said:
Trying to get my V20 rooted I figured since it's been awhile I'd try and ask hopping not to get my head ripped off about rooting this beast. I would greatly appreciate some help. Tried in the past failed miserably.
Click to expand...
Click to collapse
I am coming from the Note 7 and Samsung background. I was apart of the Tekhd team. When the note 7 starting exploding and I had to turn it in I got the v10 to test then I prefer ordered the v20.
I just need some pointers on what I need to do the rooting process on this phone is very different from what I have been used to...
how have you failed ? what methods have you used? .. ill help you out as much as i can. i had trouble rooting before so i feel your pain
Just updated to lastest version.
xDEMON87x said:
how have you failed ? what methods have you used? .. ill help you out as much as i can. i had trouble rooting before so i feel your pain
Click to expand...
Click to collapse
Which version should I use? I have the lastest update now.
Hey,
Just follow the Recowvery thread, then install whatever ROM you want after you have TWRP.
https://forum.xda-developers.com/v20/development/h918-recowvery-unlock-v20-root-shell-t3490594
I'll try I do have the newest build. December release.
ice5192 said:
I'll try I do have the newest build. December release.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=fZEL96MPLvY , follow this guide..
xDEMON87x said:
, follow this guide..
Click to expand...
Click to collapse
O tried this but when I got to type the dirtycow commands it simply doesn't find it it says no such file directory exist
egren58 said:
O tried this but when I got to type the dirtycow commands it simply doesn't find it it says no such file directory exist
Click to expand...
Click to collapse
Before copy twrp.img to internal storage, make sure the name is exactly twrp.img (it MUST be all lower case).
SuperSU file must be copied to memory card.
Anyone free this Saturday willing to help me root I have tried every method... I do where I have done wrong
egren58 said:
Anyone free this Saturday willing to help me root I have tried every method... I do where I have done wrong
Click to expand...
Click to collapse
I & a few others used this a few times,the still pics might be better since it gives you time to reread any step. I put some tips in the comment section. It's basically be the manual dirtycow way (thread with the 120+ pages).
http://android.gadgethacks.com/how-to/root-your-t-mobile-lg-v20-using-dirty-cow-0175329/
2muchspl said:
I & a few others used this a few times,the still pics might be better since it gives you time to reread any step. I put some tips in the comment section. It's basically be the manual dirtycow way (thread with the 120+ pages).
http://android.gadgethacks.com/how-to/root-your-t-mobile-lg-v20-using-dirty-cow-0175329/
Click to expand...
Click to collapse
I figured it out. It turns out that I was using the smaller portable version of adb I went ahead and install android sdk n all the files again n it worked perfectly!! ????
egren58 said:
I figured it out. It turns out that I was using the smaller portable version of adb I went ahead and install android sdk n all the files again n it worked perfectly!!
Click to expand...
Click to collapse
Congrats & welcome to the club!!!:good:
Don't forget not to do a factory reset from inside Android,only in TWRP.
2muchspl said:
Congrats & welcome to the club!!!:good:
Don't forget not to do a factory reset from inside Android,only in TWRP.
Click to expand...
Click to collapse
I formated data bia twrp when I first booted. But one thing is.. I cant figure out how to boot into twrp is it power and volume up?
egren58 said:
I formated data bia twrp when I first booted. But one thing is.. I cant figure out how to boot into twrp is it power and volume up?
Click to expand...
Click to collapse
Power and Volume down
2muchspl said:
Power and Volume down
Click to expand...
Click to collapse
Yeah.. Doesn't do anything but take a screenshot than it just sits there.. Wtf
egren58 said:
Yeah.. Doesn't do anything but take a screenshot than it just sits there.. Wtf
Click to expand...
Click to collapse
Sorry should have added this is during the boot up stage..here is a copy & paste I keep handy:
While the device is powered off, press and hold Vol - and Power button. When you see the LG logo quickly release only the power button and re-press and hold the power button (Never let go of the Vol - button) This will boot you into the LG Factory reset screen. ONLY USE THIS METHOD IF YOU HAVE TWRP INSTALLED!!!!! OTHERWISE YOU WILL FACTORY RESET YOUR DEVICE!!!!! Choose yes to both options and you will be rebooted into TWRP. TWRP intercepts this command and ignores the factory reset part.
xDEMON87x said:
https://www.youtube.com/watch?v=fZEL96MPLvY , follow this guide..
Click to expand...
Click to collapse
When you state follow this guide ( i have to say the LG dev community is kinda of rude and does not even explain anything to new comers from other devices...) Do you mean i need to follow every step or some steps this is why i say the LG Dev community is all over the place nothing is set in stone there is not one way to do like most Samsung users are used to. I would hope that you could elaborate a little more if you are offering to help.
I am not trying to be a jerk i'm just use to nicer dev community. I have done dev work... I have not had any other device besides Samsung for the longest time and i and will be switching back once the S8 or note 8 comes out.
To get me but i would like to root this device and i would like more then a point here to do it because you don't have some time to explain what needs to be done....
Again i am not trying to be rude just trying to learn the process on the LG dev side... Do not want to brick my device if i can prevent it.
ice5192 said:
When you state follow this guide ( i have to say the LG dev community is kinda of rude and does not even explain anything to new comers from other devices...) Do you mean i need to follow every step or some steps this is why i say the LG Dev community is all over the place nothing is set in stone there is not one way to do like most Samsung users are used to. I would hope that you could elaborate a little more if you are offering to help.
I am not trying to be a jerk i'm just use to nicer dev community. I have done dev work... I have not had any other device besides Samsung for the longest time and i and will be switching back once the S8 or note 8 comes out.
To get me but i would like to root this device and i would like more then a point here to do it because you don't have some time to explain what needs to be done....
Again i am not trying to be rude just trying to learn the process on the LG dev side... Do not want to brick my device if i can prevent it.
Click to expand...
Click to collapse
Yes every step i am new as well and i got to say this was the most complex toot i have ever done. But every single comand bust be typed.. Ignore the $ sign. Install sdk not the smaller version of adb.