This is for people who don't get volte even after flashing patches and changing ROMs.
Downloads-
1) Miui Eu ROM version 6.10.13
https://www.androidfilehost.com/?fid=457095661767101675
2) Cm14.1 ROM and firmware by abhishek
3) Any volte enabled ROM.
Procedure-
1) Flash the EU ROM (link given) and boot it.
2) check for volte and just make a call.
3) Go to recovery and backup efs only.
4) Then go to recovery n do a wipe then flash firmware>cm14.1 ROM>gapps>reboot.
5) Check for volte, if there then proceed to next step. If not flash firmware again.
6) After volte is enabled, flash ur desired volte enabled ROM by this procedure ROM>gapps (that's it).
Boom...!!!! Volte enabled without any patch.?
Hit 'thanks' if I helped u?
I have an issue.i got volte working on rr rom.but my 2nd sim was not working then i flashed non hlos file from latest stable than 2nd s shows nw but volte was not there.
Sent from my Redmi Note 3 using Tapatalk
jitendra purohit said:
I have an issue.i got volte working on rr rom.but my 2nd sim was not working then i flashed non hlos file from latest stable than 2nd s shows nw but volte was not there.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Try flashing cm13 radios zip
https://drive.google.com/file/d/0B1EB7hF7gaZScjZLV3NWbVFxQjA/view?usp=drivesdk
Hit 'thanks' if I helped
Aditya1011 said:
Try flashing cm13 radios zip
https://drive.google.com/file/d/0B1EB7hF7gaZScjZLV3NWbVFxQjA/view?usp=drivesdk
Hit 'thanks' if I helped
Click to expand...
Click to collapse
Did but no luck.
Sent from my Redmi Note 3 using Tapatalk
jitendra purohit said:
Did but no luck.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Flash again firmware>RR> gapps....still no volte then again flash firmware....
Aditya1011 said:
This is for people who don't get volte even after flashing patches and changing ROMs.
Boom...!!!! Volte enabled without any patch.?
Click to expand...
Click to collapse
1. There are many threads describing the same method i.e. rom version before 6.11.24,cm14 unofficial,any volte rom. So what's new?
2. Can you share any patch which can skip this procedure and get volte working in volte enabled rom?
3. Pardon me if i cant see the point of this thread.
http://forum.xda-developers.com/redmi-note-3/how-to/volte-guide-guide-to-volte-kenzo-t3525550
http://forum.xda-developers.com/red...es-nougat-based-cm-roms-t3509257/post70359012
Sudeep Duhoon said:
1. There are many threads describing the same method i.e. rom version before 6.11.24,cm14 unofficial,any volte rom. So what's new?
2. Can you share any patch which can skip this procedure and get volte working in volte enabled rom?
3. Pardon me if i cant see the point of this thread.
http://forum.xda-developers.com/redmi-note-3/how-to/volte-guide-guide-to-volte-kenzo-t3525550
http://forum.xda-developers.com/red...es-nougat-based-cm-roms-t3509257/post70359012
Click to expand...
Click to collapse
@Sudeep Duhoon I respect u for what u said. But I also tried both the methods u gave the link of but unfortunately volte didn't worked and that's why I posted this thread on exact basis of what I did and got volte.
My intentions aren't to copy the info given by other thread so please don't misunderstand me.
Aditya1011 said:
@Sudeep Duhoon I respect u for what u said. But I also tried both the methods u gave the link of but unfortunately volte didn't worked and that's why I posted this thread on exact basis of what I did and got volte.
My intentions aren't to copy the info given by other thread so please don't misunderstand me.
Click to expand...
Click to collapse
Ok i get it. :highfive:
But there is no patch to get volte working.
Aditya1011 said:
Flash again firmware>RR> gapps....still no volte then again flash firmware....
Click to expand...
Click to collapse
Did it worked ?
Aditya1011 said:
Did it worked ?
Click to expand...
Click to collapse
Not for me...back to miui.
Sent from my Redmi Note 3 using Tapatalk
jitendra purohit said:
Not for me...back to miui.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Again follow the procedure I have posted.?
Aditya1011 said:
Again follow the procedure I have posted.?
Click to expand...
Click to collapse
Will try soon...thanks buddy .?
Sent from my Redmi Note 3 using Tapatalk
jitendra purohit said:
Will try soon...thanks buddy .
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Anytime.
Dear OP @Aditya1011. Hi. Can i use this for my KATE? Really hope u can help me. TQ
Zalwani7395 said:
Dear OP @Aditya1011. Hi. Can i use this for my KATE? Really hope u can help me. TQ
Click to expand...
Click to collapse
The EU rom for Kate is different (search urself).
Rest all same.
Aditya1011 said:
The EU rom for Kate is different (search urself).
Rest all same.
Click to expand...
Click to collapse
Which firmware should i use? Suggestions please OP. TQ
Zalwani7395 said:
Which firmware should i use? Suggestions please OP. TQ
Click to expand...
Click to collapse
The firmware dated 15/11/2016 found on Abhishek's cm thread.
Related
​Hello All of You.
Hope you all are fine and Enjoying Note 2 E250 Korean Version.
As we are Korean Note 2 owner so there is always a big problem to find it ROMS.
As you all know Our Note 2 Has been updated to 4.4.2 Version, So Some Developers From Vietnam Has Fixed Vibration and Wifi Issue on 4.4.2 Custom ROMs.
NOTE: I took no credit for all of this I just have some friends in Vietnam So They Made this all possible and All the Main Credit Belongs to Electron and DN3 Team.
Special Thanks to this Man for ALL thee porting and Links
Dang Khoi
Here is Method and some Fixes For Flashing DN3 ROM in E250 L/S/K
1. Flash Stock Rom (4.4.2) for E250 L/S/K Via Odin.
2. Updated SuperSU Via ZIp For Rooting
3. Install Root Explorer.
4. Copy lkm_sec_info File From your system memory to SD card. (This is a Wifi Fix File)
5. Fash TWRP:
6. Flash: This ROM : For K:
For L :
For S:
7. Restart
8.Reboot into Rec.
9. Flash Super User
10. Install: Root Explorer
11. Replace the Copied File (lkm_sec_info) file into system with Fix Permission 6-4-4
12. Restart Now Everything is Fine Cheers.
Please Follow Every Step Carefully Otherwise i am not responsible for any kind of mess.
big input to us! mate can be used for the other custom rom?
maybe
botski said:
big input to us! mate can be used for the other custom rom?
Click to expand...
Click to collapse
maybe but you have to extract boot.img from stock to other ROMs that you want to Flash.
xxaqib said:
maybe but you have to extract boot.img from stock to other ROMs that you want to Flash.
Click to expand...
Click to collapse
this fix is only for DN3 rom?
botski said:
this fix is only for DN3 rom?
Click to expand...
Click to collapse
no you can apply this on all ROMS
xxaqib said:
no you can apply this on all ROMS
Click to expand...
Click to collapse
do i need to extract the boot.img?
botski said:
do i need to extract the boot.img?
Click to expand...
Click to collapse
yes for other N7105 ROMs,
Not for this one.
or you can flash these kernels but i have not tried this yet.
http://pan.baidu.com/s/1dDmZyV3
xxaqib said:
yes for other N7105 ROMs,
Not for this one.
or you can flash these kernels but i have not tried this yet.
http://pan.baidu.com/s/1dDmZyV3
Click to expand...
Click to collapse
mate, maybe you misunderstand me.
botski said:
mate, maybe you misunderstand me.
Click to expand...
Click to collapse
Ask me clearly bro.
xxaqib said:
Ask me clearly bro.
Click to expand...
Click to collapse
my friend.
if i use lkm_sec_info in other custom rom, it's gonna work without extracting boot.img?
No maybe in other rom u don't need to copy lkm file.
Lkm file is for wifi fix and boot.img is for vibration.
The kernel I gave you flash it after flashing any rom.
Then maybe u don't need to think about boot.img or lkm file.
Just give it a try.
Sent from my GT-N7105 using XDA Premium 4 mobile app
xxaqib said:
No maybe in other rom u don't need to copy lkm file.
Lkm file is for wifi fix and boot.img is for vibration.
The kernel I gave you flash it after flashing any rom.
Then maybe u don't need to think about boot.img or lkm file.
Just give it a try.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Alright mate thanks for the help! :good:
Welcome brother.
Sent from my GT-N7105 using XDA Premium 4 mobile app
xxaqib said:
Welcome brother.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
mate can you help me to install aircommand, change dialer pad and remove another call log in stock 4.4.2 E250K?
botski said:
mate can you help me to install aircommand, change dialer pad and remove another call log in stock 4.4.2 E250K?
Click to expand...
Click to collapse
Sorry i never use air command
and never try to change dailer pad and etc
its okay mate. thanks again!
Thank,world on my e250k
dn3 v5+
saw an update on the dn3 rom (v5+). have u tried it? is it okay to flash it and replace ikm file as was done in v4?
shv-e250l to dn3
Hi sir i would like to ask a step by step on how to flash your rom from stock 4.4.2 but already rooted, i also notice that all of your link was not working, also how can i flash twrp from odin when the file is in zip format
Sorry for the noob question
Sylver29 said:
Hi sir i would like to ask a step by step on how to flash your rom from stock 4.4.2 but already rooted, i also notice that all of your link was not working, also how can i flash twrp from odin when the file is in zip format
Sorry for the noob question
Click to expand...
Click to collapse
extract twrp
Hi friends ,
please make review and installation processes of Mokee realise20161103
thanks in advance.
Following link for download
http://download.mokeedev.com/?device=kenzo&type=release
Thank you. Android 6.0 or 7.0/7.1?
khanhdx said:
Thank you. Android 6.0 or 7.0/7.1?
Click to expand...
Click to collapse
6.0.1
What thread is this ?
nandofer said:
6.0.1
Click to expand...
Click to collapse
If it is 7.0/7.1, i will try.
anw, thanks
If anyone know the flashing process ,which gapp to flash,etc.. please give details
It is stable rom
But i m confused, y no one review it?
i alway get no signal simcard with Mokee rom. I wonder why ?
cvncbn said:
i alway get no signal simcard with Mokee rom. I wonder why ?
Click to expand...
Click to collapse
Gotta flash cm13 radio , mate. Flash it now , good luck
jxmodi said:
But i m confused, y no one review it?
Click to expand...
Click to collapse
Mokee rom is best & there are videos on Installation just browse YouTube
Sent from my Redmi Note 3 using Tapatalk
No Need For Flashing Firmware Again And Again.
For EG If you want to try RR Nougat..
Step 1
Flash RR N
Step 2
Flash CM 14 Abhishek Firmware
Step 3
Flash Universal VoLTE Patch
Step 4
Flash volte.zip
Step 4
Reboot.
It worked for me after everything I've tried.
Links brother
Give the links for universal voLTE patch and voLTE.zip and btw I'm using official rr rom by Abhishek987! So will it work,if so link me the above! Tq in adv.
ckflash09 said:
Give the links for universal voLTE patch and voLTE.zip and btw I'm using official rr rom by Abhishek987! So will it work,if so link me the above! Tq in adv.
Click to expand...
Click to collapse
https://forum.xda-developers.com/re...t/volte-patches-nougat-based-cm-roms-t3509257 also the volte.zip file is in downloads section of the thread.
ckflash09 said:
Give the links for universal voLTE patch and voLTE.zip and btw I'm using official rr rom by Abhishek987! So will it work,if so link me the above! Tq in adv.
Click to expand...
Click to collapse
Should work fine with official nightlys for people who can't get voLTE to work
What's EG and btw I flashed the rom now,what all shall I wipe? And flash? I downloaded both the files
ckflash09 said:
What's EG and btw I flashed the rom now,what all shall I wipe? And flash? I downloaded both the files
Click to expand...
Click to collapse
You don't need to wipe anything. for eg is for example.
It did not work
thelegionstar said:
You don't need to wipe anything. for eg is for example.
Click to expand...
Click to collapse
I flashed both the files using twrp and rebooted the phone,it didn't work! ???
ckflash09 said:
I flashed both the files using twrp and rebooted the phone,it didn't work! ?
Click to expand...
Click to collapse
Try this method,
https://forum.xda-developers.com/redmi-note-3/how-to/easy-volte-guide-guide-to-volte-rr-t3535559
Today I am going to share An easy tutorial to unlock bootloader and install TWRP safely without any data loss.
Requirement
1- redmi note 3
2-PC/laptop
3-common sense
(any rom version will do.will work on stable , china,dev)
*(no need to apply unlock permission)
VIDEO - A Thanksgiving to @srijansaxena11
for great work.
Srijan Saxena:
so lets start. First you need to download 2 .rar file from this link https://drive.google.com/folderview?id=0B8DMm7V05fstSVVyb2YyemxMQVk
Disable driver signature on pc/laptop
Extract both zips
Install mi flash tool from miflash with edl folder
now bring your phone in action and turn on oem unlock from developer optipn(tap miui version 7 time and find developer option in additional option)
sign out of your mi account
Now start your phone in fastboot method (power button and volume down button simultaneously)
Open miflashfolder on pc and click on edl and you will show your phone 's red led blinking ,which shows your phone is in edl mode.
Now open mi flash tool which you installed .
Click on select and locate TWRP folder . now click refresh and you will see your device detected.just hit flash .
It will be completed very soon.
Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone.
To change language look up somewhere i cant upload right now.
appreciate by hitting like/thanks
Thank you guys . -ACHYUTEM
thanks a lot... it was of great help...
Thank you:good:
srijansaxena11 said:
thanks a lot... it was of great help...
Click to expand...
Click to collapse
Glad it helped
prats101 said:
Thank you:good:
Click to expand...
Click to collapse
You are welcome
Do I need to unlock BL first?? I am stock ROM
Anands3 said:
Do I need to unlock BL first?? I am stock ROM
Click to expand...
Click to collapse
no .. you don't have to and you can do it any rom version(stable ,dev,china) . enjoy
Will work on kate version bos?
waiting for video...
after setup it is possible to flash any custom rom via twrp without loosing unlocked bootloader?
This method will working with Kate ?
jxmodi said:
waiting for video...
Click to expand...
Click to collapse
Will upload at night
przemekamag said:
This method will working with Kate ?
Click to expand...
Click to collapse
Yup bro
siluncas said:
Will work on kate version bos?
Click to expand...
Click to collapse
Yup brother
elmike1983 said:
after setup it is possible to flash any custom rom via twrp without loosing unlocked bootloader?
Click to expand...
Click to collapse
Ofcourse and you are provided best twrp i.e . zcx
Achyutem said:
just hit a thank you .. No donation no demand just appreciate by hitting like and a sweet comment.
Thank you guys . -ACHYUTEM
Click to expand...
Click to collapse
What do you expect by sweet comment..? no need for such reqs.
c_/\/\_k said:
What do you expect by sweet comment..? no need for such reqs.
Click to expand...
Click to collapse
I love when people are happy and i love being appreciated.... Btw will look after it
Hi, this method works on miui 7 (7.3.7.0) stable?
Enviado desde mi Redmi 3S mediante Tapatalk
dan017 said:
Hi, this method works on miui 7 (7.3.7.0) stable?
Enviado desde mi Redmi 3S mediante Tapatalk
Click to expand...
Click to collapse
yup it will if you have a redmi note 3
jxmodi said:
waiting for video...
Click to expand...
Click to collapse
its uploaded take a look brother
I was surfing on the web and i found a chinesse Baidu forum talking about the Zui 3.1 Official Rom,
In the attachments you will find some screenshots
Here is the link https://www.androidfilehost.com/?fid=889764386195926099, if someone want to test it.
-Android Version: 7.0 Nougat
-It's aparently a leaked rom, and is not a final version.
-I'm not the owner/developer of this rom, i just found it on internet.
-It's a .zip flasheable rom.
can i dirty flash it over zui 2.5.334 dev or ill have to clean everything and then flash the rom???will i have to do an advanced wipe or not??and does it have english language??
Ish4 said:
can i dirty flash it over zui 2.5.334 dev or ill have to clean everything and then flash the rom???will i have to do an advanced wipe or not??and does it have english language??
Click to expand...
Click to collapse
Yes, it has english languaje. You need to do wape for flash that rom because (very) probably your ROM is not official dev.
Ish4 said:
will i have to do an advanced wipe or not?
Click to expand...
Click to collapse
When only wipe cache/dalvik was done after flashing was complete - all was good and phone boots OS, when I tried to follow steps which were mentioned on zukfans (https://zukfans.eu/community/threads/zui-3-1-050-dev.6940/) I've entered a bootloop with "ZUK" logo.
I made clean install of 2.5.412 via QFIL, unlocked bootloader, TWRP, dirty flash DEV zip, no problems.
Please can someone install camera2probe app on this New Rom and confirm the status of Hal3 (Level_3 Should be green). If so this might be a great update.
No bro
Incrovantilist said:
Please can someone install camera2probe app on this New Rom and confirm the status of Hal3 (Level_3 Should be green). If so this might be a great update.
Click to expand...
Click to collapse
No bro. Only Lagecy is in green. Rest 3 option is red.
onlyrerk said:
No bro. Only Lagecy is in green. Rest 3 option is red.
Click to expand...
Click to collapse
I don't know why Zuk/Lenovo is so reluctant about our device. Even Redmi Note 3 supports Level_3 Camera2api. This is bad. The 2015 Moto X has it enabled. Why not ours?!
Anyways dude thanks :good::laugh: .
Waiting for someone to post screenshots
najjurocks619 said:
screenshots
Click to expand...
Click to collapse
you can find here: http://4pda.ru/forum/index.php?s=&showtopic=757674&view=findpost&p=64532532 & here: http://4pda.ru/forum/index.php?s=&showtopic=757674&view=findpost&p=64533875
sergsinger said:
you can find here: http://4pda.ru/forum/index.php?s=&showtopic=757674&view=findpost&p=64532532 & here: http://4pda.ru/forum/index.php?s=&showtopic=757674&view=findpost&p=64533875
Click to expand...
Click to collapse
Thanks bro
---------- Post added at 01:03 PM ---------- Previous post was at 01:01 PM ----------
Does this update have camera2 api or hdr+ inbuilt? Anyone who flashed it?
Thanks in advance
Few more questions regarding this rom -
1. Is the Modem Firmware updated or the same?
2. Since the Rom is not specific to India, does everything work good on the Network side (especially regarding Jio)?
3. Any other Network related Improvements or Problems
to be expected before flashing?
najjurocks619 said:
Does this update have camera2 api or hdr+ inbuilt?
Click to expand...
Click to collapse
Look at screenshots
Incrovantilist said:
1. Is the Modem Firmware updated or the same?
2. Since the Rom is not specific to India, does everything work good on the Network side (especially regarding Jio)?
3. Any other Network related Improvements or Problems
to be expected before flashing?
Click to expand...
Click to collapse
1. There is no modem in this zip.
2. This ROM isn't specific to my country too, but I haven't problems with network.
3. I've flashed 2.5.412 and than 3.1.050.
sergsinger said:
1. There is no modem in this zip.
2. This ROM isn't specific to my country, but I haven't problems with network.
3. I've flashed 2.5.412 and than 3.1.050.
Click to expand...
Click to collapse
Thanks for your prompt reply. :good:
One last thing regarding network, What's the Baseband version?
sergsinger said:
Look at screenshots
1. There is no modem in this zip.
2. This ROM isn't specific to my country too, but I haven't problems with network.
3. I've flashed 2.5.412 and than 3.1.050.
Click to expand...
Click to collapse
Thanks
Incrovantilist said:
What's the Baseband version?
Click to expand...
Click to collapse
I flash 3.1.050 over 2.5.412, so it must be from actual china stock.
sergsinger said:
I flash 3.1.050 over 2.5.412, so it must be from actual china stock.
Click to expand...
Click to collapse
Thanks Man. :fingers-crossed:
Anyways, Chinese basebands or not, that's a Baseband from 2016. I'd recommend you to flash M8996FAAAANAZM-1.76387.1.92759.1 .
Incrovantilist said:
I'd recommend you to flash M8996FAAAANAZM-1.76387.1.92759.1
Click to expand...
Click to collapse
I don't understand you. Mine modem version is from 2016 or you recommend me to flash 2016 baseband?
sergsinger said:
I don't understand you. Mine modem version is from 2016 or you recommend me to flash 2016 baseband?
Click to expand...
Click to collapse
The Baseband you have is from 2016. Can be a little buggy with gps. Flash the one I said, highly stable and no bugs. Proof is that RR dev MR.HACKER5476 made it the common baseband for his roms.
Incrovantilist said:
The Baseband you have is from 2016. Can be a little buggy with gps. Flash the one I said, highly stable and no bugs. Proof is that RR dev MR.HACKER5476 made it the common baseband for his roms.
Click to expand...
Click to collapse
I didn't do it on all ROMs that I've tested. I haven't problems with GPS. I'm managing threads about custom and stock firmware and see that it isn't a final solution if you face with problems related to network. On any ROM with any baseband you may face with problems.
I haven't problems, so I don't need to do redundant actions.
Who have synced Contacts from Google account? Did you get photos synced too?
For me only Contacts was synced, without photos. Sync is on.