Hi,I just installed android 4.4.3 from 4.4.2 rooted with kernel mat1x v13.5 with the following steps:
adb reboot bootloader
fastboot flash bootloader bootloader-mako-makoz30d.img
fastboot reboot-bootloader
fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1701.02.img
fastboot reboot-bootloader
fastboot flash system system.img
fastboot flash boot boot.img
fastboot format cache
fastboot reboot
Then installed CWM by:
adb reboot bootloader
fastboot flash recovery recovery-clockwork-touch-6.0.4.7.img
fastboot reboot-bootloader
and then I tried to go to recovery mode with:
Code:
fastboot reboot-bootloader
but the command line says:
Code:
<waiting for device>
. If I write:
Code:
fastboot devices
, nothing happens, but if I write:
Code:
adb devices
it does recognizes my phone.
Anyway I went to recovery mode with volume buttons (CWM is properly installed), went to sideload options, USB connected and typed:
Code:
adb sideload UPDATE-SuperSU-v1.99r3.zip
but it says:
Code:
error: device not found
While I'm in Recovery mode (in CWM) adb devices can't find any device.
SDK tools and platform-tools are just updated and PC is just rebooted.
EXTRA INFO: when i go out of CWM it says:
Code:
Root access is missing. Root device? THIS CANNOT BE UNDONE.
and options are
-no
-Yes - Root device (/system/xbin/su)
When I choose Yes it just starts with no problems.
Anything?
oliverm91 said:
Hi,I just installed android 4.4.3 from 4.4.2 rooted with kernel mat1x v13.5 with the following steps:
adb reboot bootloader
fastboot flash bootloader bootloader-mako-makoz30d.img
fastboot reboot-bootloader
fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1701.02.img
fastboot reboot-bootloader
fastboot flash system system.img
fastboot flash boot boot.img
fastboot format cache
fastboot reboot
Then installed CWM by:
adb reboot bootloader
fastboot flash recovery recovery-clockwork-touch-6.0.4.7.img
fastboot reboot-bootloader
and then I tried to go to recovery mode with:
Code:
fastboot reboot-bootloader
but the command line says:
Code:
<waiting for device>
. If I write:
Code:
fastboot devices
, nothing happens, but if I write:
Code:
adb devices
it does recognizes my phone.
Anyway I went to recovery mode with volume buttons (CWM is properly installed), went to sideload options, USB connected and typed:
Code:
adb sideload UPDATE-SuperSU-v1.99r3.zip
but it says:
Code:
error: device not found
While I'm in Recovery mode (in CWM) adb devices can't find any device.
SDK tools and platform-tools are just updated and PC is just rebooted.
EXTRA INFO: when i go out of CWM it says:
Code:
Root access is missing. Root device? THIS CANNOT BE UNDONE.
and options are
-no
-Yes - Root device (/system/xbin/su)
When I choose Yes it just starts with no problems.
Click to expand...
Click to collapse
Try reboot the phone and then reboot to recovery and see if that works. If not, try TWRP recovery.
taodan said:
Try reboot the phone and then reboot to recovery and see if that works. If not, try TWRP recovery.
Click to expand...
Click to collapse
You mean turn off the phone and turn on to recovery? Because I've already done that as I mentioned in the first post.
Not sure but aren't recovery mode and fastboot mode different?
Can you manually boot into fastboot mode on your phone rather than using adb commands?
audit13 said:
Not sure but aren't recovery mode and fastboot mode different?
Can you manually boot into fastboot mode on your phone rather than using adb commands?
Click to expand...
Click to collapse
I just used fastboot to go into recovery with my pc because i'm lazy, I can do it with the mobile, but when i tried I discovered the <waiting for device> error. And I need to use adb coomands to sideload SuperSU. I think i can flash it from the phone, but it still bothers me the fact that there is something wrong, because I use my phone to test personals apks.
oliverm91 said:
I just used fastboot to go into recovery with my pc because i'm lazy, I can do it with the mobile, but when i tried I discovered the <waiting for device> error. And I need to use adb coomands to sideload SuperSU. I think i can flash it from the phone, but it still bothers me the fact that there is something wrong, because I use my phone to test personals apks.
Click to expand...
Click to collapse
Are you using a Windows PC? If you are, boot into task mamager and kill all ADB services. Relaunch the command prompt and try it.
audit13 said:
Are you using a Windows PC? If you are, boot into task mamager and kill all ADB services. Relaunch the command prompt and try it.
Click to expand...
Click to collapse
I am, Windows 8. But this problems happens even after rebooting my PC.
oliverm91 said:
I am, Windows 8. But this problems happens even after rebooting my PC.
Click to expand...
Click to collapse
I assume the drivers load the first time you connect your phone. Does running the command prompt as an admin make a difference?
audit13 said:
I assume the drivers load the first time you connect your phone. Does running the command prompt as an admin make a difference?
Click to expand...
Click to collapse
I use PowerShell as admin
No clue?
Revoke USB debugging authorizations for all the devices from the developer options and try again..
Sent from my Nexus 4 using Tapatalk
Adb and fastboot are two different things. Use adb commands when you're booted into recovery or normally booted. Use fastboot commands when you boot into the bootloader
Sent from my Nexus 5 using XDA Free mobile app
karthi89 said:
Revoke USB debugging authorizations for all the devices from the developer options and try again..
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Did this, but ADB still doesn't recognize my phone while in recovery.
jd1639 said:
Adb and fastboot are two different things. Use adb commands when you're booted into recovery or normally booted. Use fastboot commands when you boot into the bootloader
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Ok, but ADB won't recognize my device when it's on CWM (CWM v6.0.4.7)
I realised that in "device manager" of Windows a yellow triangle appears on "Other devices" -> Nexus 4 (when im in Recovery)
and when I normally boot my phone it appears normally under "Android device" -> android composite adb interface
No clue?
D801
TL;DR: Phone will only boot into download mode, however computer won't recognize my phone.
I installed all the drivers, have multiple versions of flash tool, even tried sideloading via ADB but device isn't recognized. How do I unbrick my phone?
Download and install the Minimal ADB and Fastboot tool v1.1.3...
http://forum.xda-developers.com/showthread.php?t=2317790
While in Download mode and w/ USB Debugging enabled, double click the Minimal ADB and Fastboot shortcut, then at the Minimal ADB and Fastboot> prompt type... adb devices
If your phone isn't recognized by ADB, then you don't have the correct drivers installed.
Adb and fastboot tool for those who have problem in installing 15sec Adb and fastboot . Download from below link ?
https://www.dropbox.com/s/dutgv7vtauieqtl/minimal_adb_fastboot_v1.3.1_setup.exe?dl=0
I am trying to install recovery in fastboot mode, but i get always this message "fastboot is not recognizeble as an internal or external command". Does anyone know how can i solve this?
Thanks
You have to download fastboot driver and run CMD from the folder where fastboot files are located (shift+right click).
You can find countless tutorial and links on Google for fastboot drivers
Driver is not installing properly ....I have tried to install driver using pdanet. It shows driver installed but when I try to do root in fastboot n search fastboot command in c drive...I get driver error........
hackersamraj said:
Driver is not installing properly ....I have tried to install driver using pdanet. It shows driver installed but when I try to do root in fastboot n search fastboot command in c drive...I get driver error........
Click to expand...
Click to collapse
forget pdanet it won't do good anyway. First you would need this files on your pc/laptop.
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
after downloading is done.install drivers and then extract adb paltform tools and place the downloaded twrp img into the same folder.
Now keep in mind your directory should not have spaces eg D:\New folder\adb tools\.... but D:\New_folder\adb_tools or simply place to desktop.
go to the folder where adb and your twrp img is copied press shift+right click and select open command window here and put your yureka in fastboot mode. then type fastboot -i 0x1ebf devices now your device shold be listed.
type fastboot -i 0x1ebf oem unlock
fastboot -i 0x1ebf flash recovery recovery_name.img replace recovery_name.img with your twrp recovery name. download any super user app and then flash that using twrp recovery.