I find the lift to wake feature to be quite sensitive. For instance I can have my phone laying on my desk, set a cup of coffee down next to it, and the screen will light up as if it sensed being picked up. Currently on 7.1.1 through Cortex v3.11 (NMF26F) and ElementalX. Although it seems any ROM/Kernel I use has the same issue.
Is there a way I could go about either lowering the sensitivity or disabling it?
There should be a "Moves" category in Settings. Disable "Lift to check phone" to turn it off.
Related
Bicycling is a major mode of transport for me, and the shake-to-wake feature of my HP Slate 7 Extreme causes it to turn itself on all the time when I ride. I have to turn the Slate completely OFF to to avoid using up the battery while biking!
Does anyone know of a way to disable the shake-to-wake feature? I cannot find a setting for it!
Solved
OK I figured this out. This tablet does NOT have "shake to wake". But it does wake up if you pull out the stylus, and if the stylus is not firmly inserted in it's little cubby, it will wiggle around enough while bike riding to wake up the tablet.
Something that's been bugging me with my active display is where I have my phone mounted in my car to the right of my steering wheel. It's constantly popping up the time / active display when I move at all. I'm sure this is speeding up battery drain. It also happens a lot when I'm at my desktop at home and at work since I keep the phone nearby, upright in my keyboard's built-in dock or laying flat on the desk between my arms.
While I LOVE the idea, it would be nice to incorporate the option to have it activate via single tap instead of waving over or looking at the device. It comes up a lot when I'm not looking at it and not really waving over it. Any movement near it seems to bring that screen up and since it's not AMOLED, it is lighting every single pixel enough to worry me on drain. I've looked at displaying active display, but then I lose the entire convenience of not having to press the physical power button.
My LG G4 had a double-tap, but I think I would enjoy a single tap or something. Does anyone know of my options to disable the wave or looking at the phone waking but still have convenience? I swear I read there's an option to have it activate on movement of the phone, but not the waving detection... but can't seem to put that together myself.
I feel like a bit of a dunce... I disabled Approach for Moto Display, but left Wake screen when notifications arrive set to On Moto Display and moving the phone works. If I set that to Ambient Display or Off, then moving the phone does nothing at all. It's a temporary solution to my annoying issue, but still no response to a tap on the screen which would be the best option for those needing to disable Approach for Moto Display for whatever their reason.
One thing to make sure you're doing is that you are acknowledging notifications as they come in. You can swipe them tot he left or right to dismiss, but if you do nothing with a notification it will keep lighting the screen up every minute or so until you do.
I did not know this initially and was concerned over how much the phone lit up, after finding this out and acknowledging the notifications as they come in it's gotten a lot better.
I've seen people say that Doze activates when the phone is untouched and not charging, but I've also heard that it activates when it's lying flat. My question is: does Doze activate only when the phone is flat? Or will it activate if it's sitting at an angle, but not moving? For example, will it activate if I leave it propped up against an object?
I don't know for certain if it needs to be 100% flat, but I'd guess not. I have left mine on my bedside table that I know is not "even" (parallel to the floor) and Doze works fine. I also stayed at a friends house and left my phone on the arm of the couch I was sleeping on which is surely not flat, but Doze worked fine. I think the not moving part is much more relevant than it being completely flat. I know that it won't activate in your pocket because your body is always moving so it will never register as truly resting.
I searched, and didn't find any other posts about this, but the search engine here seemed a bit flaky.
I installed SlimKat 4.4.4.build.8.0 on my Samsung Galaxy S3, um, last year I think it was. I had previously been using SlimBean, having dumped the original Samsung ROM fairly shortly after I bought it. Since then there has been weirdness that relates to the proximity sensor.
I used E-Robot to disable the screen when anything is close to the proximity sensor. So put it face down, screen off; put it in my shirt pocket face inwards, screen off; leave it on the desk face up so I can see the screen, screen on. Naturally - hold it to your ear on a phone call, screen off, though that's a basic function of the proximity sensor, it did that anyway. On the flip side, if it was blanked and you uncover the sensor, the screen would come back on, but it would be the Lightning Launcher lock screen that I prefer. I got used to Lightning Launcher from SlimBean.
After installing SlimKat, when covering the sensor, first the volume controls show for a few seconds, THEN the screen goes off. Coming out again, the Lightning Launcher lock screen would not show. This got a bit awkward before I figured it out. I usually put my phone in my shirt pocket screen inward, so that the sensor triggers the screen disable. But now, since the volume control is showing for a few seconds first, I discovered that my chest would brush against the screen, randomly adjusting one of the volumes as it went in my pocket. Since I usually have the volume turned all the way up, the only way was down. I missed a few phone calls that way before figuring out why my phone wasn't ringing.
So I have disabled that E-Robot thing now. BTW, there's no way to turn the SlimKat screen blanker off? I would have tried that first, but could only find how to set the timeout, not how to turn it off.
More recently, though this may be a new hardware problem, but it's a big coincidence ... now the proximity sensor refuses to work at all. It always thinks it's covered. This is a really big pain, since as mentioned above, the proximity sensor is designed to disable the screen when you hold it to your ear, only now it disables it the moment the phone call starts, AND refuses to enable it after the phone call is over. The sensor still thinks it's being held to your ear, the screen stubbornly refuses to switch on, no matter what buttons I press. Only way I can get out of that state is to pull the battery. This is not good. (On the other hand, this sort of thing is why I always get phones with swappable batteries, as a very experienced computer dude, I know that sometimes you just have to kill the power.) So anyone I call gets to hear my swearing as I rip the case open and pull the battery out, before I can end the phone call. Though pulling the battery naturally ends the call. lol
About the same time I noticed the proximity sensor no longer working, I noticed the up volume button also isn't working. That could have been broken for awhile, I rarely use either volume control. Part of the reason for doing this entire proximity sensor disabling the screen thing is so I could avoid wearing out the physical buttons. The S3 is old, but I like to keep my computer hardware running for a long time.
Sooooo, proximity sensor and volume controls interact in odd ways, then both fail. That's a pretty big coincidence. Though having just written that, I have come up with a new theory. Maybe some common part of the physical circuitry for the sensor and the button was going flaky, such that the sensor triggering sent noise through the up volume control, triggering the on screen volume controls before blanking. Still, a coincidence that it only happened after installing SlimKat. Also, wouldn't this trigger both volume controls and screen disable at the same time, rather than within a few seconds? No idea how Lightning Launcher fits into this new theory.
So I'm still not sure what's causing this, or how to fix it. Other than going back to SlimBean to see if that fixes anything. It doesn't look like I can go forward, 4.4.4 looks like the last SlimRom made for the S3. At least according to OTA.
Anyone got any ideas? "Buy a new phone" isn't a good answer for me right now, can't afford it.
onefang,
I have a S3 that I ran the Slimkat 4.4.4 build 9 on for a while (9 months). There is a known issue with the CM package (used in SlimKat) that causes the volume button not to work correctly. When you are on a call, the call volume can not be raised or lowered. There may be other issues. I am currently running the CyanogenModCM12.1-20151117-SNAPSHOT-YOG7DAO1K6-d2att rom and the performance is much better than Slimkat.
Hello all!
My Razer Phone 2 stopped charging. This is how my Razer Phone 1 also died, basically the charging port went bad, then worse, then died completely.
Anyway I got the Nothing instead, since price and specs fit me pretty fine.
However I want to change a few things. I might be blind in the settings menu, but I'm hoping you'll still help me!
I got a few points I'd like changed, and no amount of googling helped me here:
1. The phone turns on the screen when I pick it up. But there are often mistakes, and the screen just turns on by itself when I'm walking with it in my hand, or in my pocket. It has happened already a few times, after having for phone for 48 hours, that I have dismissed some notifications because of this. Can I stop this function all together?
2. I can also press the screen once and the screen will turn on. This is also a problem when the phone is in my pocket. On my Razer I had to double tap and it still turned on sometimes in my pocket. I ran the Razer phone with Nova Launcher, maybe I have to change to this launcher from the Nothing one to get this double tap feature?
3. I can turn off the screen by double tapping on the home screen. That is a feature I always use and appreciate. I never put the phone screen down so the lights on the backside won't get used. I always double tap to turn on the screen, check for notifications, and double tap to turn the screen off should there be no notifications. Nothing phone won't turn off the screen with a double tap unless I actually unlock it, so I can't do a quick check for notifications by double tapping and double tapping again. It won't matter if the phone is on a table, but I frequently check notifications and put the phone back to my pocket, and having to go for the screen button is not exactly for me. Do I need Nova Launcher here?
4. I NEVER use sounds on my phone, except for the alarms. When someone calls me while the screen is turned off, the screen turns off and I get vibration. If the screen is on I won't get any vibration from it, only a visual notification which is easy to overlook if I let it sit with the screen on but locked if I just checked notifications. Also I like the feedback in my hands in case I am doing something on the phone. I already missed some calls because of this. Can it be changed?
5. Is it possible to manipulate the glyph on the backside? I found a "secret" setting which makes them light up to the music playing, but that became pretty annoying just after 5 seconds. Are there some basic things you can do with the light? Like making a custom event and then specify how the light should react? Could be something simple like when a call is active the lights come on very dim? Maybe a 3rd party app someone did?
6. The Razer Phone 2 (and 1) has HUGE speakers in the top and bottom, so I have been living with pretty big bezels. The Nothing has the same size but the phone is almost 100% screen. If I need to go to the bottom and press a back button or something, I cannot reach anymore like on the Razer. Is there a way to add some virtual bezels on Android?
7. I really hate this "notch" or "camera bump". It is a bit of the same as number 6, but can I remove it completely, so the top of the screen where the camera is won't be used at all? The whole line, effectively adding more bezel here too.
I am probably picky, but I have used my phone in a specific way for my whole life, and I am not really good with changes. Also I think a phone should adapt to my needs, and I shouldn't adapt to it.
Thanks for reading and hopefully helping
To be honest, sounds like the Nothing Phone isn't the right device for you.
I like to know the answer to question 1 too.
Jelle99 said:
Hello all!
My Razer Phone 2 stopped charging. This is how my Razer Phone 1 also died, basically the charging port went bad, then worse, then died completely.
Anyway I got the Nothing instead, since price and specs fit me pretty fine.
However I want to change a few things. I might be blind in the settings menu, but I'm hoping you'll still help me!
I got a few points I'd like changed, and no amount of googling helped me here:
1. The phone turns on the screen when I pick it up. But there are often mistakes, and the screen just turns on by itself when I'm walking with it in my hand, or in my pocket. It has happened already a few times, after having for phone for 48 hours, that I have dismissed some notifications because of this. Can I stop this function all together?
2. I can also press the screen once and the screen will turn on. This is also a problem when the phone is in my pocket. On my Razer I had to double tap and it still turned on sometimes in my pocket. I ran the Razer phone with Nova Launcher, maybe I have to change to this launcher from the Nothing one to get this double tap feature?
3. I can turn off the screen by double tapping on the home screen. That is a feature I always use and appreciate. I never put the phone screen down so the lights on the backside won't get used. I always double tap to turn on the screen, check for notifications, and double tap to turn the screen off should there be no notifications. Nothing phone won't turn off the screen with a double tap unless I actually unlock it, so I can't do a quick check for notifications by double tapping and double tapping again. It won't matter if the phone is on a table, but I frequently check notifications and put the phone back to my pocket, and having to go for the screen button is not exactly for me. Do I need Nova Launcher here?
4. I NEVER use sounds on my phone, except for the alarms. When someone calls me while the screen is turned off, the screen turns off and I get vibration. If the screen is on I won't get any vibration from it, only a visual notification which is easy to overlook if I let it sit with the screen on but locked if I just checked notifications. Also I like the feedback in my hands in case I am doing something on the phone. I already missed some calls because of this. Can it be changed?
5. Is it possible to manipulate the glyph on the backside? I found a "secret" setting which makes them light up to the music playing, but that became pretty annoying just after 5 seconds. Are there some basic things you can do with the light? Like making a custom event and then specify how the light should react? Could be something simple like when a call is active the lights come on very dim? Maybe a 3rd party app someone did?
6. The Razer Phone 2 (and 1) has HUGE speakers in the top and bottom, so I have been living with pretty big bezels. The Nothing has the same size but the phone is almost 100% screen. If I need to go to the bottom and press a back button or something, I cannot reach anymore like on the Razer. Is there a way to add some virtual bezels on Android?
7. I really hate this "notch" or "camera bump". It is a bit of the same as number 6, but can I remove it completely, so the top of the screen where the camera is won't be used at all? The whole line, effectively adding more bezel here too.
I am probably picky, but I have used my phone in a specific way for my whole life, and I am not really good with changes. Also I think a phone should adapt to my needs, and I shouldn't adapt to it.
Thanks for reading and hopefully helping
Click to expand...
Click to collapse
1. There is an option to turn this feature off under Display->Lock Screen called Lift to show lock screen.
2. Don't know, but you should try using the Nova Launcher.
3. Don't know, but you should try using the Nova Launcher.
4. Very niche use case, you can try to search some root methods.
5. There is root app which can control the light you can try that.
6. and 7. There should be some root apps or magisk modules which allows to do that.
To 2: (I dont know if this works on NothingOS since im on Paranoid Android. But both are very near to stock, maybe it works for you or for others.) I disabled that tap to activate setting and am using fingerprint while screen is off. This can also act as a quick look for notifications, for that i tap where the fingerprint reader is really short so it fails to unlock. This way only the always on display shows up for 3-4 seconds.
Nova wont change anything lockscreen related.
To 5: If you have root, time and like playing around with commands and apps, you can try tasker. Since im on Paranoid Android and the glyphs arent really implemented yet, i made a task that fits my needs perfect.
To your other problems: i think too, the phone should adapt to the user. So i suggest you to wait, i guess there will come roms that are way more customizable.
And maybe a pixel would fit your needings better than this phone because there is a big custom rom scene around.