help please - Galaxy S 5 Q&A, Help & Troubleshooting

Its making me scared i downloaded a recovery and flashed its via odin but always stock at boot logo with a red writing saying recovery is not seandriod enforcing

will it not progress past that? also, which S5 do you have? the model # will be SM-G900? but the ? will be a letter

model # of phone, what rom/firmware were u running .
which twrp version did u flash, provide a link to it.
dont be scared, most soft bricks are easily fixed, the red warning is normal, worst case scenario is flashing stock via odin

vincom said:
model # of phone, what rom/firmware were u running .
which twrp version did u flash, provide a link to it.
dont be scared, most soft bricks are easily fixed, the red warning is normal, worst case scenario is flashing stock via odin
Click to expand...
Click to collapse
this is correct. sammobile.com/firmwares is the best place ot get said firmwares, but its a SLLLLLOOOOWWWWWW download for non premium members. But its the offical place to get em. D/L your firmware, flash it in Odin and youll likely be back to new. Then you can go from there for root and TWRP

im using a samsung smg 900h and i tried flashing a twrp recovery and it wount always boot the recouvery but alwaysbstocks at samsung logo i did it several times and it finally boot into the recouvry once but still shows 0mb no storage .. after i removed the battery and inserted it back from there again it stoped loading the recovery can u help me please

pro_rikee said:
im using a samsung smg 900h and i tried flashing a twrp recovery and it wount always boot the recouvery but alwaysbstocks at samsung logo i did it several times and it finally boot into the recouvry once but still shows 0mb no storage .. after i removed the battery and inserted it back from there again it stoped loading the recovery can u help me please
Click to expand...
Click to collapse
go to sammobile.com/firmwares and download the firmware for your phone. its a slow download, but its THE BEST place to get the tar.md5 file. Flash it in Odin, and start over. That should get you up and running. The 0 mb thing is usually because a PIT file got flashed incorrectly.

pro_rikee said:
im using a samsung smg 900h and i tried flashing a twrp recovery and it wount always boot the recouvery but alwaysbstocks at samsung logo i did it several times and it finally boot into the recouvry once but still shows 0mb no storage .. after i removed the battery and inserted it back from there again it stoped loading the recovery can u help me please
Click to expand...
Click to collapse
be sure to flash correct fw for 900h
same as w/twrp, which one/method did u try

vincom said:
be sure to flash correct fw for 900h
same as w/twrp, which one/method did u try
Click to expand...
Click to collapse
this is correct, sammobile.com/firmwares is the most legit place to get the tar.md5 files, but the d/l is super slow if youre a free member. The wait is worth it tho as theyre straight from samsung. TWRP 3.0.2 is the best one ATM also. There are 3.0.2-1 and 3.0.2-2 as well, but dont use those as they are buggy as [email protected]

youdoofus said:
this is correct, sammobile.com/firmwares is the most legit place to get the tar.md5 files, but the d/l is super slow if youre a free member. The wait is worth it tho as theyre straight from samsung. TWRP 3.0.2 is the best one ATM also. There are 3.0.2-1 and 3.0.2-2 as well, but dont use those as they are buggy as [email protected]
Click to expand...
Click to collapse
3.0.2-2 is buggy in what way. its the only one afaik can lets me access my sdcards while in recovery via windows explorer

vincom said:
3.0.2-2 is buggy in what way. its the only one afaik can lets me access my sdcards while in recovery via windows explorer
Click to expand...
Click to collapse
3.0.2-1 and 3.0.2-2 have well documented instances of issues restoring NANDs from internal and external that those versions made themselves. Ive never seen a report of 3.0.2 having nand restore issues. Used to see it all the time on 3.0.2-1 and 3.0.2-2 when they first came out a while back. For those of us who flash tons of ROMS, a good nand is necessary and it has to be reliable because having to Odin flash due to a corrupted nand is annoying.
I was agreeing with you earlier btw. just trying to give additional info

Related

[Q] Need stock rom and flashing method i9506

Hello there..
I have a Galaxy s4 lte qualcomm 4g.
Flashed cm11 4.4.4
CyanogenMod Version : 11-20150102-unofficial-ks01lte
Base-band : i9506XXUCNJ1
Recovery : Philz touch recovery 6.x.x.x
I want to revert back to stock android touch-wiz 4.4.2 but unable to find the Odin flash-able file or cwm flash file.
Can anyone give some clear instruction on how to go back to stock and download sources ????
Any help would be greatly appreciated.
born_high said:
Hello there..
I have a Galaxy s4 lte qualcomm 4g.
Flashed cm11 4.4.4
CyanogenMod Version : 11-20150102-unofficial-ks01lte
Base-band : i9506XXUCNJ1
Recovery : Philz touch recovery 6.x.x.x
I want to revert back to stock android touch-wiz 4.4.2 but unable to find the Odin flash-able file or cwm flash file.
Can anyone give some clear instruction on how to go back to stock and download sources ????
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Download Sources and flashing procedure are here thanks to @DeHAWK
http://forum.xda-developers.com/showthread.php?t=2597058
next time search in the forums before creating new threats its against xda rules
bryanfeanor said:
Download Sources and flashing procedure are here thanks to @DeHAWK
http://forum.xda-developers.com/showthread.php?t=2597058
next time search in the forums before creating new threats its against xda rules
Click to expand...
Click to collapse
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
Hey
You are only flashing a kernel...not a full 4.4.2 original image.
And that's why you're stock on the boot logo.
Regards.
born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
For the complete image, you can get from here:
http://samsung-updates.com/device/?id=GT-I9506
or here:
http://www.sammobile.com/firmwares/database/GT-I9506/
born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
As mentioned you are flasing only kernel, i use odin 1.85
stock 5.0.1 roms mega mirrors http://forum.xda-developers.com/gal...06-lolipop-official-samsung-firmware-t3023794 thanks to @Mar10
and tar files from 4.4.2 open nordic countries thanks to @DeHAWK
XXUCNJ11 https://mega.co.nz/#!cNE3nDSB!zjPWcM7OI-ltonzAuMKDdREinHr6ilm-ZBg0oqxD2k8
XXUCNI1 https://mega.co.nz/#!1EtAWTQB!zHVAwXe3odz6ipvhZmpdSXUnTKy1w_oYRpRlRMRa6DQ
take the battery out wait 5-10 secs and enter to download mode to avoid modem issues.
its not recomendable but if you have a backup of a pit file for your phone select it and thick re-partition, this is dangerous but may help with bootloop only if flashing the firmware with no repartition work, repartition with out a pit file may brick your device.
bryanfeanor said:
As mentioned you are flasing only kernel, i use odin 1.85
stock 5.0.1 roms mega mirrors http://forum.xda-developers.com/gal...06-lolipop-official-samsung-firmware-t3023794 thanks to @Mar10
and tar files from 4.4.2 open nordic countries thanks to @DeHAWK
XXUCNJ11 https://mega.co.nz/#!cNE3nDSB!zjPWcM7OI-ltonzAuMKDdREinHr6ilm-ZBg0oqxD2k8
XXUCNI1 https://mega.co.nz/#!1EtAWTQB!zHVAwXe3odz6ipvhZmpdSXUnTKy1w_oYRpRlRMRa6DQ
take the battery out wait 5-10 secs and enter to download mode to avoid modem issues.
its not recomendable but if you have a backup of a pit file for your phone select it and thick re-partition, this is dangerous but may help with bootloop only if flashing the firmware with no repartition work, repartition with out a pit file may brick your device.
Click to expand...
Click to collapse
Thank you for the reply
I will give it a try and let you know the results.
One more noob question..
I did a back up of my touchwiz before converting to CM.
And i got the back up file as normal file folder instead a zip file.
I wonder if there is a way to restore it.
I already tried zipping it and restoring from philz recovery...but it says bad file.
Screenshots of Backup :
born_high said:
One more noob question..
I did a back up of my touchwiz before converting to CM.
And i got the back up file as normal file folder instead a zip file.
I wonder if there is a way to restore it.
I already tried zipping it and restoring from philz recovery...but it says bad file.
Screenshots of Backup :
Click to expand...
Click to collapse
you´re welcome.
did you do the backup from philz recovery? i never did a backup from recovery, only with titanium, so i really dont know, but to restore a backup needs to be done from the same source that the backup was created. for the screen shots looks like a CWM recovery backup good luck.
bryanfeanor said:
you´re welcome.
did you do the backup from philz recovery? i never did a backup from recovery, only with titanium, so i really dont know, but to restore a backup needs to be done from the same source that the backup was created. for the screen shots looks like a CWM recovery backup good luck.
Click to expand...
Click to collapse
sLIGHTLY RE-eDIT OF PREVIOUS POST :
yes its a cwm backup file created with philz..
And i was able to restore it via the recovery under restore oiption.
but after the first samsung screen (samsung galaxy s4) and a blue T logo, it gets struck on the third screen with only samsung written on it with a solid blue led.
(( what the heck am i doing wrong.
Anyway i flashed the full image with odin..(taken from your link).
And back to touchwiz again.
Thanks a lot.
One more thing is, it changed my baseband version a bit.
Build number : I9506XXUCNJ1
bASEBAND vERSION : I9506XXUCNF3
IS THAT A PROBLEM ?
BEST REGARDS.
born_high said:
sLIGHTLY RE-eDIT OF PREVIOUS POST :
yes its a cwm backup file created with philz..
And i was able to restore it via the recovery under restore oiption.
but after the first samsung screen (samsung galaxy s4) and a blue T logo, it gets struck on the third screen with only samsung written on it with a solid blue led.
(( what the heck am i doing wrong.
Click to expand...
Click to collapse
T logo?
well the backup is from another build xxucnj2 from the screen shots,try restoring only data in adavance restore option or reflash this
http://www.sammobile.com/firmwares/download/39412/I9506XXUCNJ2_I9506TELCNJ1_TEL.zip/ and try again, you may have to create an account to download the file is free,
bryanfeanor said:
T logo?
well the backup is from another build xxucnj2 from the screen shots,try restoring only data in adavance restore option or reflash this
http://www.sammobile.com/firmwares/download/39412/I9506XXUCNJ2_I9506TELCNJ1_TEL.zip/ and try again, you may have to create an account to download the file is free,
Click to expand...
Click to collapse
Sorry to bother you again.
But i am facing a new kinda problem now with custom recoveries.
After flashing NEE-I9506XXUCNJ1-20141114075501 yesterday it got auto updated to 5.0.1 lollipop .
Now i am stuck with stock recovery.
Tried to flash philz 6.x.x.x as before with odin. The odin process completes itself and reboots the phone.
But when i try to get into recovery still its booting in stock recovery.
Any solution on how can i flash custom recovery on this ?
Additional info
Baseband version : I9506XXUDOA6
bUILD NUMBER : LRX22C. I9506XXUDOA6
Flash your Favorite Custom Recovery with Odin 3.xx and put it to AP. Check that Auto Reboot isn't marked. After successful flashing your Phone won't to reboot. USB Cable out and put your Battery out and wait few seconds. Put your Battery in and reboot it to Recovery. The Stock Recovery can't now overwrite the Custom Recovery.
born_high said:
Sorry to bother you again.
But i am facing a new kinda problem now with custom recoveries.
After flashing NEE-I9506XXUCNJ1-20141114075501 yesterday it got auto updated to 5.0.1 lollipop .
Now i am stuck with stock recovery.
Tried to flash philz 6.x.x.x as before with odin. The odin process completes itself and reboots the phone.
But when i try to get into recovery still its booting in stock recovery.
Any solution on how can i flash custom recovery on this ?
Additional info
Baseband version : I9506XXUDOA6
bUILD NUMBER : LRX22C. I9506XXUDOA6
Click to expand...
Click to collapse
in lollipop i used TWRP recovery (TWRP_2.8.4.0_ks01lte_20150207.tar.md5)https://www.mediafire.com/folder/p3rwwfm7xn76x/TWRP flashed with odin 1.85 no problems.
but after rooting with cf autoroot http://download.chainfire.eu/502/CF-Root/CF-Auto-Root/CF-Auto-Root-ks01lte-ks01ltexx-gti9506.zip( extract and flash with odin in pda) because cf autorrot flash stock recovery after rooting.
Important after rooting flash immediately custom recovery, if you boot in stock recovery after root all apps will force close and you will need to wipe data (stock recovery wipe data will delete internal memory as well), so do not boot in stock recovery.
bryanfeanor said:
in lollipop i used TWRP recovery (TWRP_2.8.4.0_ks01lte_20150207.tar.md5)https://www.mediafire.com/folder/p3rwwfm7xn76x/TWRP flashed with odin 1.85 no problems.
but after rooting with cf autoroot http://download.chainfire.eu/502/CF-Root/CF-Auto-Root/CF-Auto-Root-ks01lte-ks01ltexx-gti9506.zip( extract and flash with odin in pda) because cf autorrot flash stock recovery after rooting.
Important after rooting flash immediately custom recovery, if you boot in stock recovery after root all apps will force close and you will need to wipe data (stock recovery wipe data will delete internal memory as well), so do not boot in stock recovery.
Click to expand...
Click to collapse
You are a life saver man, you know that .
I will give it a shot and let you know the results.
Phew finally its done...
Thank you guys for keeping up with my noob questions.
happy Androiding
born_high said:
Phew finally its done...
Thank you guys for keeping up with my noob questions.
happy Androiding
Click to expand...
Click to collapse
You´re welcome, we all were noobs, and in somethings we still are, thats the best part of this, something new comes everytday so much to learn and do.

[Q] SM-T537R4 Galaxy Tab 4 10.1 will not load! Only has download and stock recovery

Rooted the device with Odin. But couldn't for the life of me find a recovery for it. Flash a ton through Odin then final got a TWRP recovery to work.. When I wiped everything I was instructed to I tried to flash the rom I found (Bliss) I got a could not mount preload error.. And another error I can't recall. Then it just kept looping. So I ran the root file through Odin again.. And it now just boots straight to the Samsun logo and sits there until you hold power vol down (or up) and home till it switches to download or recovery. The TWRP is gone somehow and its stock again.
Hope this isn't confusing... I'll answer any questions and try any suggestion... PLEASE HELP
eatfleshzombie said:
Rooted the device with Odin. But couldn't for the life of me find a recovery for it. Flash a ton through Odin then final got a TWRP recovery to work.. When I wiped everything I was instructed to I tried to flash the rom I found (Bliss) I got a could not mount preload error.. And another error I can't recall. Then it just kept looping. So I ran the root file through Odin again.. And it now just boots straight to the Samsun logo and sits there until you hold power vol down (or up) and home till it switches to download or recovery. The TWRP is gone somehow and its stock again.
Hope this isn't confusing... I'll answer any questions and try any suggestion... PLEASE HELP
Click to expand...
Click to collapse
As far as I know there aren't any custom recoveries or roms working for your model number, so that's why nothing is working properly. Your only solution would appear to be to download the stock firmware and flash back to stock with Odin.
thisisapoorusernamechoice said:
As far as I know there aren't any custom recoveries or roms working for your model number, so that's why nothing is working properly. Your only solution would appear to be to download the stock firmware and flash back to stock with Odin.
Click to expand...
Click to collapse
Thanks for the link! I'll do that as soon as I get home.
Do you know if there's any way to get a custom rom onto my tablet?
eatfleshzombie said:
Thanks for the link! I'll do that as soon as I get home.
Do you know if there's any way to get a custom rom onto my tablet?
Click to expand...
Click to collapse
Unfortunately I'm fairly certain there are no custom Roms available for your tablet
thisisapoorusernamechoice said:
Unfortunately I'm fairly certain there are no custom Roms available for your tablet
Click to expand...
Click to collapse
Thats ok
I started the flsh of the stock firmware...seems hung up...does it take very long time to load?... the status hasnt changed in like 5 minutes.
did you get twrp to work? Im trying to get that installed so I can use xposed on the same model I believe sm-t537r4 I have it currently rooted

Bricked note 4 with CF- Auto-Root, can i revive it?

Ok here's what i did wrong. Tried rooting my SM-N910H with CF-Auto-Root, using the wrong d/l ( CF-Auto-Root-tre3g-tre3gxx-smn910h )
My phone was 6.0.1 and i foolishly flashed this file onto it using Odin ( correct me if i'm wrong but it is an earlier version yes? )
So the upshot is my phone will no longer boot up or boot into recovery as i have the "recovery is not seandroid enforcing" error.
Have looked all over the net to find the solution, but no joy. Have tried d/ling latest stock firmware for my phone and flashing with Odin, but it fails everytime.
I think my biggest prob is trying to find THE RIGHT firmware to fix this. Am i on the right track to try and fix this? Any help would be much appreciated.
Blu3sman said:
Ok here's what i did wrong. Tried rooting my SM-N910H with CF-Auto-Root, using the wrong d/l ( CF-Auto-Root-tre3g-tre3gxx-smn910h )
My phone was 6.0.1 and i foolishly flashed this file onto it using Odin ( correct me if i'm wrong but it is an earlier version yes? )
So the upshot is my phone will no longer boot up or boot into recovery as i have the "recovery is not seandroid enforcing" error.
Have looked all over the net to find the solution, but no joy. Have tried d/ling latest stock firmware for my phone and flashing with Odin, but it fails everytime.
I think my biggest prob is trying to find THE RIGHT firmware to fix this. Am i on the right track to try and fix this? Any help would be much appreciated.
Click to expand...
Click to collapse
Instead of flashing any firmware , try to flash the correct cf auto root file.
Reporting Via N910G
Blu3sman said:
Ok here's what i did wrong. Tried rooting my SM-N910H with CF-Auto-Root, using the wrong d/l ( CF-Auto-Root-tre3g-tre3gxx-smn910h )
My phone was 6.0.1 and i foolishly flashed this file onto it using Odin ( correct me if i'm wrong but it is an earlier version yes? )
So the upshot is my phone will no longer boot up or boot into recovery as i have the "recovery is not seandroid enforcing" error.
Have looked all over the net to find the solution, but no joy. Have tried d/ling latest stock firmware for my phone and flashing with Odin, but it fails everytime.
I think my biggest prob is trying to find THE RIGHT firmware to fix this. Am i on the right track to try and fix this? Any help would be much appreciated.
Click to expand...
Click to collapse
Download firmware from sammobiles. com
http://www.sammobile.com/firmwares/database/SM-N910H/
yashthemw said:
Instead of flashing any firmware , try to flash the correct cf auto root file.
Reporting Via N910G
Click to expand...
Click to collapse
Ok well i tried that and that didn't work. However after double checking its seems that i had the correct file in the first place. So what went wrong?
One thing i need to ask. Does your phone NEED to be unlocked in order to root it?
Trex i went to Sammobiles and what my problem is there is WHICH country firmware to i d/l??? there are so many!!! Should any one of them do the trick?
Blu3sman said:
Ok well i tried that and that didn't work. However after double checking its seems that i had the correct file in the first place. So what went wrong?
One thing i need to ask. Does your phone NEED to be unlocked in order to root it?
Trex i went to Sammobiles and what my problem is there is WHICH country firmware to i d/l??? there are so many!!! Should any one of them do the trick?
Click to expand...
Click to collapse
try flashing a custom recovery specific for your phone model and from within flash superSU.
its_me_Sandy said:
try flashing a custom recovery specific for your phone model and from within flash superSU.
Click to expand...
Click to collapse
Ok Sandy thats worked, however i'm stuck on how to install SuperSU. Obviously i want the right ver but my phone will still not bootup,
so how do i get the right ver SuperSU onto my phone? Do i use ADB?
Blu3sman said:
Ok Sandy thats worked, however i'm stuck on how to install SuperSU. Obviously i want the right ver but my phone will still not bootup,
so how do i get the right ver SuperSU onto my phone? Do i use ADB?
Click to expand...
Click to collapse
This is the current supersu 2.78-sr1. It's systemless root for all samsung marshmallow firmware.
http://download.chainfire.eu/1003/SuperSU/SR1-SuperSU-v2.78-SR1-20160915123031.zip
1 Download to phone.
2 Boot into recovery.
3 Click install, and find zip that you downloaded.
4. Reboot, All done
Phone will boot loop once. That is normal.
P.S. If this is first time you installed Twrp, I would make a full backup and save it some where.
:good: if that helped.
aaron74 said:
This is the current supersu 2.78-sr1. It's systemless root for all samsung marshmallow firmware.
http://download.chainfire.eu/1003/SuperSU/SR1-SuperSU-v2.78-SR1-20160915123031.zip
1 Download to phone.
2 Boot into recovery.
3 Click install, and find zip that you downloaded.
4. Reboot, All done
Phone will boot loop once. That is normal.
P.S. If this is first time you installed Twrp, I would make a full backup and save it some where.
:good: if that helped.
Click to expand...
Click to collapse
Well Aaron thats my problem, i can't download it to my phone. The one constant through all this is that i can't turn my phone on as such.
My pc doesn't even recognize it, in fact the only thing that does is Odin, not Kies, not ADB, nothing lol.
I can get the phone into the custom recovery i have flashed (TWRP) and get into "download" mode, but thats it. So where do we go from here?
Ok i have an update on this. PC now sees the phone but only as a modem.
Blu3sman said:
Well Aaron thats my problem, i can't download it to my phone. The one constant through all this is that i can't turn my phone on as such.
My pc doesn't even recognize it, in fact the only thing that does is Odin, not Kies, not ADB, nothing lol.
I can get the phone into the custom recovery i have flashed (TWRP) and get into "download" mode, but thats it. So where do we go from here?
Ok i have an update on this. PC now sees the phone but only as a modem.
Click to expand...
Click to collapse
Oh, I misunderstood.
If that's the case. If you can goto download mode, download stock firmware, then flash with Odin.
To get your csc, since you can go in twrp. Use twrp file explorer. copy the file in /efs/imei folder. Thinks it's called mps_code. Copy to ext sd. Now that file should have your csc region code written in it. Read file in pc. That should be firmware you want to download.
See if that helps.
Blu3sman said:
Ok Sandy thats worked, however i'm stuck on how to install SuperSU. Obviously i want the right ver but my phone will still not bootup,
so how do i get the right ver SuperSU onto my phone? Do i use ADB?
Click to expand...
Click to collapse
Find the correct version of superSU from the above post..put it in a pen drive or in the memory card via card reader.
Flash it via OTG cable or put back the card n flash
ALRIGHT!!!! Ok guys just a heads up. As you can probably guess my phone is WORKING!!!....so far. Was able to do as you suggested and found the txt file, Using TWRP file browser ,that told me what ver firmware i have, inserted an sd card i had in my Tab S, copied file to that, read in my pc card reader, downloaded and installed said firmware and BADA BING BADA BOOM, all good!! I still am unsure on how this happened. I've rooted 3 HTC phones and my Galalxy Tab S successfully, so it's not like i didn't know what i was doing, 1 question that hasn't been answered though is, must the phone be network unlocked in order to root it? Because thats the one thing i didn't do that i did on the others. Want to thank all you guys for all your help. This was doing my head in and without your direction i probably would not have been able to do this.
Many Thanks.
PS: any one suggest a good rooting method for this phone??? lol
hi. i have the exact problem. can you please help,, i dont have twrp or supersu. [email protected] please if anyone can help

Half bricked galaxy s5! G900h

So the situation is that my phone is not booting up not in recovery mode and not in normal mode BUT it is however BOOTING INTO DOWNLOAD MODE .
now i thought maybe i will just reinstall the stock file and get back to business but it is still not booting up after flashing stock file properly as well in odin it goes as pass 100% but it does not boot back .
SINCE RECOVERY mode is not working i could not flash a custom rom
all this happened when i installed a boot logo changer zip from here https://forum.xda-developers.com/showpost.php?p=65599504&postcount=22 , after that it hasnt been working !
please help @yash92duster or anyone else with such knowledge!
yogesh.kalyana said:
So the situation is that my phone is not booting up not in recovery mode and not in normal mode BUT it is however BOOTING INTO DOWNLOAD MODE .
now i thought maybe i will just reinstall the stock file and get back to business but it is still not booting up after flashing stock file properly as well in odin it goes as pass 100% but it does not boot back .
SINCE RECOVERY mode is not working i could not flash a custom rom
all this happened when i installed a boot logo changer zip from here https://forum.xda-developers.com/showpost.php?p=65599504&postcount=22 , after that it hasnt been working !
please help @yash92duster or anyone else with such knowledge!
Click to expand...
Click to collapse
That link you attached is good
its the one many G900H users using
no one else faced the issue of bricking the device
maybe you must have dirty flashed several roms so it must have bricked
Try repartition with PIT
no other way i think
Keeps failing
yash92duster said:
That link you attached is good
its the one many G900H users using
no one else faced the issue of bricking the device
maybe you must have dirty flashed several roms so it must have bricked
Try repartition with PIT
no other way i think
Click to expand...
Click to collapse
repartition just keeps failing. Gonna try again will try and find a way.
yogesh.kalyana said:
Departing just keeps failing. Gonna try again will try and find a way.
Click to expand...
Click to collapse
use KITKAT Repair Firmware and try along with PIT
it should work
Thanks bro
yash92duster said:
use KITKAT Repair Firmware and try along with PIT
it should work
Click to expand...
Click to collapse
I think my pit file is corrupted do I have the correct one or maybe a link to it. I am gonna try with initial firmware of KitKat S5 came up with.
yogesh.kalyana said:
I think my pit file is corrupted do I have the correct one or maybe a link to it. I am gonna try with initial firmware of KitKat S5 came up with.
Click to expand...
Click to collapse
after flashing stock can u boot into stock recovery, if yes wipe caches and reset to factory
nope
vincom said:
after flashing stock can u boot into stock recovery, if yes wipe caches and reset to factory
Click to expand...
Click to collapse
no recoveries at all.
only download mode
nah bro!
yash92duster said:
use KITKAT Repair Firmware and try along with PIT
it should work
Click to expand...
Click to collapse
it did not work !
it is still not booting up but i can boot it into download mode
yogesh.kalyana said:
no recoveries at all.
only download mode
Click to expand...
Click to collapse
if odin flashed fw ok then upon reboot did you see samsung logo, how many screens came up after reboot from odin, 1 or 2. reboot pc and try odin again or another fw, LL or MM
what happens when trying recovery mode.
keep trying to get into recovery, remove battery for 10secs first b4 trying to get into recovery and w/out cable plugged in
yogesh.kalyana said:
it did not work !
it is still not booting up but i can boot it into download mode
Click to expand...
Click to collapse
What rom were you using before crash
What did you do at last
Post all details
yash92duster said:
What rom were you using before crash
What did you do at last
Post all details
Click to expand...
Click to collapse
your nemesis rom
yogesh.kalyana said:
your nemesis rom
Click to expand...
Click to collapse
Answer both questions
vincom said:
if odin flashed fw ok then upon reboot did you see samsung logo, how many screens came up after reboot from odin, 1 or 2. reboot pc and try odin again or another fw, LL or MM
what happens when trying recovery mode.
keep trying to get into recovery, remove battery for 10secs first b4 trying to get into recovery and w/out cable plugged in
Click to expand...
Click to collapse
after odin gives a successful flash phone does not boots up at all. no screens come up and i cannot enter recovery mode
and it does not work with any firmwares in odin mode system status says custom where current binary says official
yash92duster said:
Answer both questions
Click to expand...
Click to collapse
I was on nemesis rom and i flashed that logo changer zip as i mentioned in OP and after it hasnt booted up
if fw flashed w/out errors and odin is set to auto reboot and it doesnt, u could be sol.
try diff fw, reboot pc and/or try diff pc, cables.
theres also ways to repartition but idk about those methods
yogesh.kalyana said:
I was on nemesis rom and i flashed that logo changer zip as i mentioned in OP and after it hasnt booted up
Click to expand...
Click to collapse
do this
use laptop ( shutdown once and turn it back on and use )
use different usb 2.0 cable
use new odin application
Use New MM based Firmware
if it doesnt boot
then flash PIT alone in odin
then if stock recovery comes clear data and cache
and then install twrp and flash new roms
if not work i dont have any other solutions
:good::good:
good luck
tried but no show!
yash92duster said:
do this
use laptop ( shutdown once and turn it back on and use )
use different usb 2.0 cable
use new odin application
Use New MM based Firmware
if it doesnt boot
then flash PIT alone in odin
then if stock recovery comes clear data and cache
and then install twrp and flash new roms
if not work i dont have any other solutions
:good::good:
good luck
Click to expand...
Click to collapse
i tried it but it did not work
looks like the guy is dead !
any idea on how much it could cost me ?
if it has any sign of life its ususally recoverable .
links to fw u have tried, were they for the g900h?
which odin ver did u try
pull battery for long time, say 10mins b4 going into dl mode.
just flash bl and modem, search xda for howto.
did u try kies?
u can try usb jig or jtag as last resort
vincom said:
if it has any sign of life its ususally recoverable .
links to fw u have tried, were they for the g900h?
which odin ver did u try
pull battery for long time, say 10mins b4 going into dl mode.
just flash bl and modem, search xda for howto.
did u try kies?
u can try usb jig or jtag as last resort
Click to expand...
Click to collapse
all firmwares i have tried are from sammobile and odin version i tried are odin 3.11.1
i tried leaving it for an hour as well.
i have tried bl and modem too along pit file
i have not tried kies
i am going to try usb jig or jtag as last rersort
yogesh.kalyana said:
all firmwares i have tried are from sammobile and odin version i tried are odin 3.11.1
i tried leaving it for an hour as well.
i have tried bl and modem too along pit file
i have not tried kies
i am going to try usb jig or jtag as last rersort
Click to expand...
Click to collapse
give kies a shot and/or try both odin 3.09 and 3.10

Help recovering data

So I have a friend who decided to mess with his phone, of course without doing a backup, and now he's stuck in a situation that it can't boot even into recovery.
Currently all I see when booting to recovery:
Recovery Booting. . . . .
Set Warranty Bit : recovery
The phone is G900F
He has no idea what version was installed on it before.
I don't need the phone to boot, I need to recover the files on it.
Being a oneplus person myself, I'm not that familiar with samsung phones (my latest samsung was s2).
I've tried to install with odin (3.0.7 - if that matters) the following recoveries:
official twrp 2.8.7
twrp
cwm
All these recoveries showed "Recovery is not seandroid enforcing" message as well as the above when trying to boot into recoveries.
I've tried the official recovery as well:
https://forum.xda-developers.com/galaxy-s5/general/sm-g900f-stock-recovery-5-0-lollipop-t3228871
which removed the "seandroid" message, but that's all.
Not sure what I'm missing.
Any help would be appreciated!
Tahvok said:
So I have a friend who decided to mess with his phone, of course without doing a backup, and now he's stuck in a situation that it can't boot even into recovery.
Currently all I see when booting to recovery:
Recovery Booting. . . . .
Set Warranty Bit : recovery
The phone is G900F
He has no idea what version was installed on it before.
I don't need the phone to boot, I need to recover the files on it.
Being a oneplus person myself, I'm not that familiar with samsung phones (my latest samsung was s2).
I've tried to install with odin (3.0.7 - if that matters) the following recoveries:
official twrp 2.8.7
twrp
cwm
All these recoveries showed "Recovery is not seandroid enforcing" message as well as the above when trying to boot into recoveries.
I've tried the official recovery as well:
https://forum.xda-developers.com/galaxy-s5/general/sm-g900f-stock-recovery-5-0-lollipop-t3228871
which removed the "seandroid" message, but that's all.
Not sure what I'm missing.
Any help would be appreciated!
Click to expand...
Click to collapse
Hmm...
I see that your friend messed up his phone very well .....
Hopefully the eMMC memory is not corrupted becuase then only motherboard replacement would be necessary.
Summarising what you wrote:
1. you flashed "official recovery 2.8.7" -> where did you get it from? 2.8.7 is the very old version!
2. you flashed unofficial TWRP very old (2014) recovery (I checked your link)
3. you flashed unofficial CWM very old (2014) recovery (I checked your link)
4. finally you flashed stock, from old OS 5.0 Lollipop recovery provided from entrusted source - nobody reported that it works in the thread.
I listed this for you in order to underline one thing - READ, READ, READ, ASK, ASK, ASK .... before flashing anything to the phone and tell it to your friend.
Le's start with flashing from ODIN ver 3.12.7 (I am using it) this version of TWRP:
twrp-3.1.1-0-klte.img.tar for G900F which is the latest official recovery:
https://twrp.me/samsung/samsunggalaxys5qualcomm.html
Read how to flash it with odin method (when you open the link).
Edit: Are you sure the phone is SM-G900F? Please check model number on the label under battery (inside the phone).
Edit2: When you enter odin mode check phone model version as well - it is provided by installed bootloader.
Many40 said:
Hmm...
I see that your friend messed up his phone very well .....
Hopefully the eMMC memory is not corrupted becuase then only motherboard replacement would be necessary.
Summarising what you wrote:
1. you flashed "official recovery 2.8.7" -> where did you get it from? 2.8.7 is the very old version!
2. you flashed unofficial TWRP very old (2014) recovery (I checked your link)
3. you flashed unofficial CWM very old (2014) recovery (I checked your link)
4. finally you flashed stock, from old OS 5.0 Lollipop recovery provided from entrusted source - nobody reported that it works in the thread.
I listed this for you in order to underline one thing - READ, READ, READ, ASK, ASK, ASK .... before flashing anything to the phone and tell it to your friend.
Le's start with flashing from ODIN ver 3.12.7 (I am using it) this version of TWRP:
twrp-3.1.1-0-klte.img.tar for G900F which is the latest official recovery:
https://twrp.me/samsung/samsunggalaxys5qualcomm.html
Read how to flash it with odin method (when you open the link).
Edit: Are you sure the phone is SM-G900F? Please check model number on the label under battery (inside the phone).
Edit2: When you enter odin mode check phone model version as well - it is provided by installed bootloader.
Click to expand...
Click to collapse
First, thank you for trying to help me!
Please see attachments:
https://drive.google.com/folderview?id=1euC7-CoBeeUQxTGXQnPPgRE2-5VxFXLh
You can see that it is indeed g900f. I've also checked under the battery.
I've flashed the recovery you asked, however I could not find odin 3.12.7 only 3.12.10, so I've flashed with that (the odin thread on xda does not provide a link for 3.12.7 download).
You can see that it's still not booting with that recovery, it's just stuck at "booting recovery" screen.
I'm thinking perhaps it has a bad bootloader? How would you suggest to proceed?
Tahvok said:
First, thank you for trying to help me!
Please see attachments:
https://drive.google.com/folderview?id=1euC7-CoBeeUQxTGXQnPPgRE2-5VxFXLh
You can see that it is indeed g900f. I've also checked under the battery.
I've flashed the recovery you asked, however I could not find odin 3.12.7 only 3.12.10, so I've flashed with that (the odin thread on xda does not provide a link for 3.12.7 download).
You can see that it's still not booting with that recovery, it's just stuck at "booting recovery" screen.
I'm thinking perhaps it has a bad bootloader? How would you suggest to proceed?
Click to expand...
Click to collapse
Ok. Let's continue ... I hope (as I had very similar situation) that the phone is not hardbricked and eMMC memory is not corrupted -> I faced this on my phone and finally had to replace motherboard.
But let's be optimistic:
1. For data recovery - I don't have a silver bullet for this but I found this software: http://www.recover-android-iphone.com/recover-android/how-to-recover-data-bricked-samsung.html
It needs working odin mode so under condition that it supports s5 G900F it should be able to restore some data.
2. For unbricking - I recommend to flash via odin the latest official Samsung stock firmware dedicated to your friend's country/region:
https://www.sammobile.com/firmwares/galaxy-s5/SM-G900F/
You must be registered to download the software. Link for odin 3.12.7 is available on the bottom of the download page.
Just to underline - odin flash most probably (anybody please confirm that) will wipe your data so be aware of that.
Good luck.
Many40 said:
Ok. Let's continue ... I hope (as I had very similar situation) that the phone is not hardbricked and eMMC memory is not corrupted -> I faced this on my phone and finally had to replace motherboard.
But let's be optimistic:
1. For data recovery - I don't have a silver bullet for this but I found this software: http://www.recover-android-iphone.com/recover-android/how-to-recover-data-bricked-samsung.html
It needs working odin mode so under condition that it supports s5 G900F it should be able to restore some data.
2. For unbricking - I recommend to flash via odin the latest official Samsung stock firmware dedicated to your friend's country/region:
https://www.sammobile.com/firmwares/galaxy-s5/SM-G900F/
You must be registered to download the software. Link for odin 3.12.7 is available on the bottom of the download page.
Just to underline - odin flash most probably (anybody please confirm that) will wipe your data so be aware of that.
Good luck.
Click to expand...
Click to collapse
Why a full firmware is needed? Perhaps I can flash only the parts required to get into recovery? I count mount the phone from recovery, that's why it's my priority.
I would like to know also if odin will wipe everything if flashing a full firmware?
Tahvok said:
Why a full firmware is needed?
Click to expand...
Click to collapse
Because it is commonly recommended way to unbrick a phone.
Perhaps I can flash only the parts required to get into recovery?
Click to expand...
Click to collapse
Perhaps, yes. But:
1. I don't exactly know what restricts your recovery to run properly. Flashing separate recovery failed.
2. You, for example, could try flashing separately one of the latest bootloaders dedicated to G900F from BL section with odin but I doubt it would help.
I count mount the phone from recovery, that's why it's my priority.
I would like to know also if odin will wipe everything if flashing a full firmware?
Click to expand...
Click to collapse
As far as I know yes but I am not 100% sure because I didn't try that myself on s5.
I would appreciate if somebody else confirms that.
Many40 said:
2. You, for example, could try flashing separately one of the latest bootloaders dedicated to G900F from BL section with odin but I doubt it would help.
Click to expand...
Click to collapse
Can you suggest a bootloader for me? I would like to try that first.
Tahvok said:
Can you suggest a bootloader for me? I would like to try that first.
Click to expand...
Click to collapse
In my opinion, if odin mode works then bootloader should be OK. But as you wish -
tell me first what stock firmware will you later on trying to flash on your friends phone or in which country the phone will be operated.
Many40 said:
In my opinion, if odin mode works then bootloader should be OK. But as you wish -
tell me first what stock firmware will you later on trying to flash on your friends phone or in which country the phone will be operated.
Click to expand...
Click to collapse
Hong Kong
Tahvok said:
Hong Kong
Click to expand...
Click to collapse
Latest available Firmware version for Hong Kong is G900FZHS1CQD1 however I can't find a separate flashable bootloader for you.
Generaly, in my opinion you might try any of the latest bootloaders compatible with SM-G900F phone (here you can find a collection: https://forum.xda-developers.com/showpost.php?p=54094068&postcount=3, I am on G900FXXS1CQI4) but again:
1. I doubt it will help for entering recovery;
2. I still recommend to flash complete stock firmware to unbrick the phone.
However if you anyway decide to try with a bootloader, flash it with odin from BL section (untick auto reboot). Also turn off the phone before and after flashing and pull out battery for about 30 sec. It happens that bootloader doesn't flash properly at once even the odin says "PASS" so some people reported that they needed to repeat flashing a few times. I managed to flash bootloader at first time.
Unfortunateely the phone is not with me anymore, so I won't be able to continue testing. Thank you anyway for trying to help me! I really appreciate your help!

Categories

Resources