Database Users

[HOW TO] How to Root 5.1 with (unlocked bootloader)

I've seen posts requesting "how to" and posts of problems attempting to root after installing the 5.1 OTA update. This post outlines the steps to root with an UNLOCKED BOOTLOADER.
NOTE: This will only work if your bootloader is already unlocked. It is based on -> http://forum.xda-developers.com/moto-x/moto-x-qa/instructions-unlocking-rooting-dev-ed-t2649738 but slightly updated.
Don't know if your bootloader can be unlocked? see -> HERE
Requirements...
the latest TWRP fastboot IMG file (Alternate Link) UPDATE: There is an issue with TWRP 2.8.7.0 (SEE THIS POST Thanks @jodaboda ). Please use TWRP 2.8.6.0 for now!
the latest Installable ZIP of SuperSU (Alternate: http://download.chainfire.eu/supersu )
You must have already installed the Motorola Drivers, ADB, Android Platform Tools, and mFastboot
mFastboot (get from the previous link). NOTE: Stock fastboot that ships with the Android SDK/Platform tools will likely work, but Moto's fastboot is always suggested!
Your battery has an 80% or greater charge!!
MicroUSB Cable.
Know how to start your phone into the Fastboot AP/Bootloader mode...
Unplug phone
Power down phone.
Hold Volume Down and Power
After a few seconds release Power, you should be in Fastboot AP menu on phone.
The steps...
NOTE: replace TWRP.IMG in the below steps, with the name of the file you downloaded!! Example: twrp-2.8.6.0-ghost.img
NOTE: failure to perform these steps EXACTLY as written can result in the apparence of the Android in distress (logo with Exclamation mark) with the caption "No Command" and the inability to enter recovery, OR it will enter STOCK recovery even though you have flashed TWRP!
Start the phone in Fastboot AP mode.
Connect your phone to PC via MicroUSB cable.
open a command prompt and change to the folder you downloaded your TWRP.IMG file.
type the following, pressing enter after each command, and wait for it to finish before going onto the next...
mfastboot flash recovery TWRP.img
mfastboot reboot-bootloader
Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
The device should enter TWRP.
If your device is not rooted, TWRP may prompt you to root now or install SuperSU. Do it.
Use the menu options to Reboot to system.
You will likely be prompted to UPDATE SuperSU. Please update it, and reboot.
IF TWRP doesn't prompt you to root/install SuperSU.... (more exact instructions coming later...)
With your phone booted normally, connect it via USB cable to your PC.
Drag/Drop the SuperSU.zip you downloaded onto the phone's internal storage
Reboot the phone into TWRP
Use the menu option to install zip, navigate to and select the SuperSU zip.
Boot to System.
EDIT: 9-17-2015 edited first TWRP link.

KidJoe said:
I've seen posts requesting "how to" and posts of problems attempting to root after installing the 5.1 OTA update. This post outlines the steps to root with an UNLOCKED BOOTLOADER.
NOTE: This will only work if your bootloader is already unlocked. It is based on -> http://forum.xda-developers.com/moto-x/moto-x-qa/instructions-unlocking-rooting-dev-ed-t2649738 but slightly updated.
Don't know if your bootloader can be unlocked? see -> HERE
Requirements...
the latest TWRP fastboot IMG file (Alternate Link)
the latest Installable ZIP of SuperSU (Alternate: http://download.chainfire.eu/supersu )
You must have already installed the Motorola Drivers, ADB, Android Platform Tools, and mFastboot
mFastboot (get from the previous link). NOTE: Stock fastboot that ships with the Android SDK/Platform tools will likely work, but Moto's fastboot is always suggested!
Your battery has an 80% or greater charge!!
MicroUSB Cable.
Know how to start your phone into the Fastboot AP/Bootloader mode...
Unplug phone
Power down phone.
Hold Volume Down and Power
After a few seconds release Power, you should be in Fastboot AP menu on phone.
The steps...
NOTE: replace TWRP.IMG in the below steps, with the name of the file you downloaded!! Example: twrp-2.8.6.0-ghost.img
NOTE: failure to perform these steps EXACTLY as written can result in the apparence of the Android in distress (logo with Exclamation mark) with the caption "No Command" and the inability to enter recovery, OR it will enter STOCK recovery even though you have flashed TWRP!
Start the phone in Fastboot AP mode.
Connect your phone to PC via MicroUSB cable.
open a command prompt and change to the folder you downloaded your TWRP.IMG file.
type the following, pressing enter after each command, and wait for it to finish before going onto the next...
mfastboot flash recovery TWRP.img
mfastboot reboot-bootloader
Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
The device should enter TWRP.
If your device is not rooted, TWRP may prompt you to root now or install SuperSU. Do it.
Use the menu options to Reboot to system.
You will likely be prompted to UPDATE SuperSU. Please update it, and reboot.
IF TWRP doesn't prompt you to root/install SuperSU.... (more exact instructions coming later...)
With your phone booted normally, connect it via USB cable to your PC.
Drag/Drop the SuperSU.zip you downloaded onto the phone's internal storage
Reboot the phone into TWRP
Use the menu option to install zip, navigate to and select the SuperSU zip.
Boot to System.
Click to expand...
Click to collapse
I still haven't unlocked my Bootloader (being on 5.1). In the linked post it's been mentioned that "TWRP custom recovery for KitKat" - my question is, is there a TWRP Custom Recover for OTA 5.1 update? And I'm on XT1052, same procedure follows?

Do you know where I can find mfastboot for Mac OSX?

kidjoe, your a priceless resource!
i installed an older verison of twrp and had all the issues you speak off, installed 2.8.6 with success but would not root upon reboot, installed the super su zip in op via twrp, one last thing i had to enter the super su app and tap enable superuser and now all is good:good::good

Thanks, worked like a charm

Thanks.. It's been ages since I used I last used adb commands and flashed something. I couldn't figure out how to boot into recovery.

Vampirexox said:
I still haven't unlocked my Bootloader (being on 5.1). In the linked post it's been mentioned that "TWRP custom recovery for KitKat" - my question is, is there a TWRP Custom Recover for OTA 5.1 update? And I'm on XT1052, same procedure follows?
Click to expand...
Click to collapse
twrp-2.8.6.0-ghost.img works on Lollipop too. (just used it last night on my sister-in-law's GSM Dev Edition XT1053 that got the lollipop update)

jay_em said:
Do you know where I can find mfastboot for Mac OSX?
Click to expand...
Click to collapse
Here is a copy on my Box 'drive':
https://app.box.com/s/5nlgy2avccupw4box8z2be50ezt4qn7p
EDIT: I just got an e-mail saying it had been downloaded. :good:
---------- Post added at 08:54 AM ---------- Previous post was at 08:45 AM ----------
kyzn said:
Thanks.. It's been ages since I used I last used adb commands and flashed something. I couldn't figure out how to boot into recovery.
Click to expand...
Click to collapse
EDIT: [If you are still running the stock Recovery] You can also use:
Code:
adb reboot recovery
When you see the horizontal robot hold the Volume Up key for 3 seconds and then tap Power and the Recovery Menu will display.

Thanx for this how-to. Everyone has been getting confused in root process for 5.1 although it is nearly same as 4.4.4.
Sent from my XT1052

I had to use twrp-2.8.6.0-ghost.img
twrp 2.8.7 would not "see" the SD card, and I couldn't install the SuperSU.zip
Thanks for the post!

jodaboda said:
I had to use twrp-2.8.6.0-ghost.img
twrp 2.8.7 would not "see" the SD card, and I couldn't install the SuperSU.zip
Thanks for the post!
Click to expand...
Click to collapse
I had the same issue with my XT1053. Following your advice did the trick. Not being able to modify my dpi since upgrading has been killing me. Its the only thing i really want root for. Thanks for everything both you and op!

jodaboda said:
I had to use twrp-2.8.6.0-ghost.img
twrp 2.8.7 would not "see" the SD card, and I couldn't install the SuperSU.zip
Thanks for the post!
Click to expand...
Click to collapse
Ahh... 2.8.7 wasn't out when I tried.. 2.8.6 was the latest at that time. Maybe there is a bug in 2.8.7 that will get fixed in future versions?

Sunshine unlocked bootloader
Does anyone know if there are any issues resulting from a Sunshine unlocked bootloader? I saw one post that had a warning but it was a warning because there was no information at the time. Has this change?

i installed TWRP successful, but after normal reset, TWRP is gone, it's only stock recovery (Android down image). Please help me. My phone is running 5.1 update OTA, unlocked bootloader

md07 said:
i installed TWRP successful, but after normal reset, TWRP is gone, it's only stock recovery (Android down image). Please help me. My phone is running 5.1 update OTA, unlocked bootloader
Click to expand...
Click to collapse
When you say "installed TWRP successful"... do you mean that fastboot didn't error? or that fastboot completed the install, you did a mfastboot reboot-bootloader, and tried entering TWRP but it still gave you the "dead android" image?

Is there any unofficial way to unlock bootloader?
Sent from my Nexus 7 using Tapatalk

I can't get it to work on a friend's Moto X... I flash using mfastboot and upon rebooting, it goes into battery charging mode.
If I fully boot into Android, then reboot to recovery, I still get the "dead Android on his back" recovery. What's going on?!

djibril13 said:
Is there any unofficial way to unlock bootloader?
Click to expand...
Click to collapse
Sunshine... IF you're phone has never been upgraded to 4.4.4.
BUT if you can get unlock code from Moto, while it can void your warranty (depending on your local laws), that is FREE, and the best way.

SX86 said:
I can't get it to work on a friend's Moto X... I flash using mfastboot and upon rebooting, it goes into battery charging mode.
If I fully boot into Android, then reboot to recovery, I still get the "dead Android on his back" recovery. What's going on?!
Click to expand...
Click to collapse
help me understand your situation...
You are doing.. Mfastboot flash recovery -> mfastboot reboot-bootloader -> you get battery charging screen rather than fasboot/bootloader menu/screen?
or ??

SX86 said:
I can't get it to work on a friend's Moto X... I flash using mfastboot and upon rebooting, it goes into battery charging mode.
If I fully boot into Android, then reboot to recovery, I still get the "dead Android on his back" recovery. What's going on?!
Click to expand...
Click to collapse
after flashing did you but to recovery befour booting system? with my experience i had to boot to recovery first befour system

How to flash TWRP and Root Moto X Style on Marshmallow

I am using moto x style and unlocked bootloader with 'Windroid Universal Android Toolkit' v2.5 but cannot flash TWRP and root this apl. Today I tried flash TWRP and then root but after showing 'Congratulation' pop up,my phone stucked on 'No command' page. I tried twice and same result. Later i check there is either no TWRP or root by SuperSU. And i see youtube video and and read many XDA forum and comments and most of the users says the phone stuck on M logo page when reboot after the root process. And all says its a issue with Marshmallow. And most of the xda posts and youtube video are made during 5.1.1 so there is no problem in that video during flash TWRP and root. So i need a seamless process to flash TWRP and root on Marshmallow so that it doesnot stuck on M logo. And I dont want to downgrade to L for root. And unluckily if it stuck M logo thwn what to do to go back to home screen?Thank you.

http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958

Look in my sig...

It's in my signature... There are multiple links to what your looking for and other threads, if you are on computer they should be immediately below the message, if you're in the XDA app you have to look in the user profile (don't think it's possible in Tapatalk though).
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958

acejavelin said:
It's in my signature... There are multiple links to what your looking for and other threads, if you are on computer they should be immediately below the message, if you're in the XDA app you have to look in the user profile (don't think it's possible in Tapatalk though).
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
Click to expand...
Click to collapse
My build no is 24.49-18-4. So is this process suitable for this build no? And still i dont flash TWRP. I tried with "Windroid Universal Android Toolkit app" to flash TWRP. though it showed a 'Successful' pop up but it didn't. Can I go with any old process to flash TWRP or u have a new process?

Atanu Mukherjee said:
My build no is 24.49-18-4. So is this process suitable for this build no? And still i dont flash TWRP. I tried with "Windroid Universal Android Toolkit app" to flash TWRP. though it showed a 'Successful' pop up but it didn't. Can I go with any old process to flash TWRP or u have a new process?
Click to expand...
Click to collapse
Step 1 - Stop using toolkits! They rarely work right on modern Android devices. With the Moto the only safe, reliable way to root is manually.
I don't know what the 'old way' is to flash TWRP your referring to here... I recommend one time booting twrp with "fastboot boot twrp.img" command (replace twrp.img with your actual twrp image file) then perform a backup to the SD card or USB OTG device and put it away for safe keeping. Then flash twrp either with twrp you have booted, or manually with "fastboot flash recovery twrp.img"
The rooting method I linked before is valid for all Marshmallow builds, if you have Lollipop or Nougat you need to find a different method.

acejavelin said:
Step 1 - Stop using toolkits! They rarely work right on modern Android devices. With the Moto the only safe, reliable way to root is manually.
I don't know what the 'old way' is to flash TWRP your referring to here... I recommend one time booting twrp with "fastboot boot twrp.img" command (replace twrp.img with your actual twrp image file) then perform a backup to the SD card or USB OTG device and put it away for safe keeping. Then flash twrp either with twrp you have booted, or manually with "fastboot flash recovery twrp.img"
The rooting method I linked before is valid for all Marshmallow builds, if you have Lollipop or Nougat you need to find a different method.
Click to expand...
Click to collapse
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I am saying about this official method which is on twrp.me site. And after typing 'fastboot reboot' what I have to do to go home page? Sorry to ask u so many things. Actually I am totally new in this thing and very much worry after facing issues 2-3 times. And thank u very much for fast reply.
One more ques, I have unlocked bootloader with that "Windroid Universal Android Toolkit". Now in fastboot it shows 'bootloader unlocked,code 3' is that ok? As u say toolkit doesnot work on modern devices.

Atanu Mukherjee said:
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I am saying about this official method which is on twrp.me site. And after typing 'fastboot reboot' what I have to do to go home page? Sorry to ask u so many things. Actually I am totally new in this thing and very much worry after facing issues 2-3 times. And thank u very much for fast reply.
One more ques, I have unlocked bootloader with that "Windroid Universal Android Toolkit". Now in fastboot it shows 'bootloader unlocked,code 3' is that ok? As u say toolkit doesnot work on modern devices.
Click to expand...
Click to collapse
So Moto is a tad different... After you flash recovery, do not reboot with fastboot, instead use the Vol Dn key select Recovery and press Power to start it. When the splash screen comes up, allow changes to system, then I the TWRP main menu select Reboot - Recovery, the device will start TWRP again and it should be "locked" in. From there perform the rooting.

acejavelin said:
So Moto is a tad different... After you flash recovery, do not reboot with fastboot, instead use the Vol Dn key select Recovery and press Power to start it. When the splash screen comes up, allow changes to system, then I the TWRP main menu select Reboot - Recovery, the device will start TWRP again and it should be "locked" in. From there perform the rooting.
Click to expand...
Click to collapse
That mean after typing fastboot flash recovery twrp.img press enter and then i can plug off the usb keeping my device on fastboot then changes to recovery and do the rest?
Btw suppose if i dont want to root it at that time,then what i do? I mean just after flash recovery how to go to home screen without rooting?
And when i want to perform root process later,after installing SuperSU zip if I press power button and vol down then may I go to twrp recovery or ph stock recovery?

Atanu Mukherjee said:
That mean after typing fastboot flash recovery twrp.img press enter and then i can plug off the usb keeping my device on fastboot then changes to recovery and do the rest?
Btw suppose if i dont want to root it at that time,then what i do? I mean just after flash recovery how to go to home screen without rooting?
And when i want to perform root process later,after installing SuperSU zip if I press power button and vol down then may I go to twrp recovery or ph stock recovery?
Click to expand...
Click to collapse
OK... I'm confused, why are you unlocking and installing twrp if your not going root or flash a custom ROM?

acejavelin said:
OK... I'm confused, why are you unlocking and installing twrp if your not going root or flash a custom ROM?
Click to expand...
Click to collapse
I will definately do so. I also want to use CM14.1 but i want to do so step by step. Actually after facing issues 2-3 times i am little bit worry now. That is true. So hesitate to perform both at a single time.

Atanu Mukherjee said:
I will definately do so. I also want to use CM14.1 but i want to do so step by step. Actually after facing issues 2-3 times i am little bit worry now. That is true. So hesitate to perform both at a single time.
Click to expand...
Click to collapse
You don't need to root if your going CM, flash TWRP, backup, and flash CM. You don't need to over complicate it.
If you boot (not flash) TWRP and backup then get a copy to safe place there is little risk of anything going wrong.

acejavelin said:
You don't need to root if your going CM, flash TWRP, backup, and flash CM. You don't need to over complicate it.
If you boot (not flash) TWRP and backup then get a copy to safe place there is little risk of anything going wrong.
Click to expand...
Click to collapse
Ok. But is there any regular chance of going wrong during flash TWRP or flash CM? I backed up all internal important data to external sd card and when I perform these process I just remove that sd from phone.
You pls tell me how to go to home screen after flashing TWRP?
And if I need to root it later then also what to do then? I mean if then I press power and vol minus then will I get TWRP recovery to root it or it will be redirectred to phone custom recovery?

Atanu Mukherjee said:
Ok. But is there any regular chance of going wrong during flash TWRP or flash CM? I backed up all internal important data to external sd card and when I perform these process I just remove that sd from phone.
You pls tell me how to go to home screen after flashing TWRP?
And if I need to root it later then also what to do then? I mean if then I press power and vol minus then will I get TWRP recovery to root it or it will be redirectred to phone custom recovery?
Click to expand...
Click to collapse
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.

acejavelin said:
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
Click to expand...
Click to collapse
Thank you very much for your kind guidance and quick reply. I will perform this may be tomorrow and then inform you. If it is bricked or stucked in any stage/page then is there any instant process to go back to safety?

acejavelin said:
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
Click to expand...
Click to collapse
I am listing here only the commands,u just tell me is this ok?
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot boot twrp.img
Will these commands directly take me to twrp page?
And here I put a pic of the twrp page. If I dont want to root it then what to do? Click reboot option or anything else to do?

Atanu Mukherjee said:
I am listing here only the commands,u just tell me is this ok?
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot boot twrp.img
Will these commands directly take me to twrp page?
And here I put a pic of the twrp page. If I dont want to root it then what to do? Click reboot option or anything else to do?
Click to expand...
Click to collapse
Your last two are redundant, either flash or boot, you don't have to do both, but each has a purpose... Flash is permanent, boot is transient and will disappear on a reboot.
Boot TWRP first, the first time it will not take you to the main page initially but show you a notification page asking if you want allow it to make changes to the system or keep it read-only, this time only do not allow changes... Then the main screen of TWRP will be displayed and you should do a full backup of all partitions to the SD card.
Flash will just write the recovery partition, it doesn't start anything, you select recovery from the fastboot menu to start it.

acejavelin said:
Your last two are redundant, either flash or boot, you don't have to do both, but each has a purpose... Flash is permanent, boot is transient and will disappear on a reboot.
Boot TWRP first, the first time it will not take you to the main page initially but show you a notification page asking if you want allow it to make changes to the system or keep it read-only, this time only do not allow changes... Then the main screen of TWRP will be displayed and you should do a full backup of all partitions to the SD card.
Flash will just write the recovery partition, it doesn't start anything, you select recovery from the fastboot menu to start it.
Click to expand...
Click to collapse
So after "fastboot boot twrp.img" i have to allow to make changes and have to do a nandroid backup. After that will I get option to "Reboot?"
And later when I went to recovery I will get twrp page instead of stock recovery? 1st I think I should flash cm13 then root then upgrade to 14.1 bcz still a feel little worry to root it on stock rom.

Atanu Mukherjee said:
So after "fastboot boot twrp.img" i have to allow to make changes and have to do a nandroid backup. After that will I get option to "Reboot?"
And later when I went to recovery I will get twrp page instead of stock recovery? 1st I think I should flash cm13 then root then upgrade to 14.1 bcz still a feel little worry to root it on stock rom.
Click to expand...
Click to collapse
No, almost every part of what your saying is wrong...
Boot twrp and do not allow changes first time and backup. This will give a clean backup to restore from if things go badly.
After this is complete, in TWRP go to Reboot menu and select Bootloader, flash TWRP, do not reboot but use the bootloader menu to start TWRP. This time allow it to make changes to system. At the main menu if twrp go to Reboot - Recovery the device will restart and TWRP will load automatically, this step will lock in twrp so the stock OS doesn't replace it.
You only need to root stock rom, you don't need to root CM roms as they are already rooted (there are a few roms that are not pre-rooted but they are rare and none of the ones your talking about). As far as CM 13 vs 14.1 I can't really help you but from I've read both are stable enough for a daily driver device.

acejavelin said:
No, almost every part of what your saying is wrong...
Boot twrp and do not allow changes first time and backup. This will give a clean backup to restore from if things go badly.
After this is complete, in TWRP go to Reboot menu and select Bootloader, flash TWRP, do not reboot but use the bootloader menu to start TWRP. This time allow it to make changes to system. At the main menu if twrp go to Reboot - Recovery the device will restart and TWRP will load automatically, this step will lock in twrp so the stock OS doesn't replace it.
You only need to root stock rom, you don't need to root CM roms as they are already rooted (there are a few roms that are not pre-rooted but they are rare and none of the ones your talking about). As far as CM 13 vs 14.1 I can't really help you but from I've read both are stable enough for a daily driver device.
Click to expand...
Click to collapse
After typing 'fastboot flash recovery twrp.img' i switch to recovery and select it. But it shows recovery failed,bla bla in red colour. I tried 3 times but same result. What to do? now again when I go to the recovery,i see still it is the stock recovery.

Moto E4 Woods TWRP flash "orange state device cannot be trusted" result

Hi, hope you can help solve the problem that happened with my Moto E4 "woods". Installing TWRP recovery (TWRP-3.2.1.-0_woods_UNOFFICIAL.img) went smoothly via ADB fastboot flash recovery etc. The phone rebooted however in "Orange State- your device has been unlocked and can't be trusted". Having searched the internet the solution seemed to be to prevent the phone from installing it's own recovery again by getting it to reboot via ADB with the command "fastboot boot ....recovery.img (the name of the TWRP image). It does so succesfully by first downloading "boot.img" and then the same thing happened as before, it boots into the unlocked orange state warning. The phone still has the stock rom on it and will boot into that normally once I've removed the battery and put it back in. But I have no recovery at all now, not the stock recovery either. Pressing volume down and power gets me into adb connection, and volume up into the warning. Any solutions? Anyone else had the same problem? Thanks!

[email protected] said:
Hi, hope you can help solve the problem that happened with my Moto E4 "woods". Installing TWRP recovery (TWRP-3.2.1.-0_woods_UNOFFICIAL.img) went smoothly via ADB fastboot flash recovery etc. The phone rebooted however in "Orange State- your device has been unlocked and can't be trusted". Having searched the internet the solution seemed to be to prevent the phone from installing it's own recovery again by getting it to reboot via ADB with the command "fastboot boot ....recovery.img (the name of the TWRP image). It does so succesfully by first downloading "boot.img" and then the same thing happened as before, it boots into the unlocked orange state warning. The phone still has the stock rom on it and will boot into that normally once I've removed the battery and put it back in. But I have no recovery at all now, not the stock recovery either. Pressing volume down and power gets me into adb connection, and volume up into the warning. Any solutions? Anyone else had the same problem? Thanks!
Click to expand...
Click to collapse
When you're in bootloader, keep pressing volume button until it says recovery. Then tap power. If you already fastboot flashed recovery, no need to fastboot boot recovery recovery.img. just boot to bootloader and tap volume until you see recovery, then tap power.

madbat99 said:
When you're in bootloader, keep pressing volume button until it says recovery. Then tap power. If you already fastboot flashed recovery, no need to fastboot boot recovery recovery.img. just boot to bootloader and tap volume until you see recovery, then tap power.
Click to expand...
Click to collapse
Thanks for your reply and thinking with me, but like I wrote, all there is left is the option to use ADB. Pressing volume up and power no longer gets me into a choice menu, only a black screen with small white letters telling me to attach a cable.
No tapping whatsoever will change that. Volume up gets the orange state message again. So....

You need to flash the old recovery first ....from one of my threads ..follow full guide by flash no dm-verity ..THEN install new recovery via old twrp recovery ...the "NEW" recovery has errors so be warned :good:that will work
Go look in one of my guides for woods for old files

KevMetal said:
You need to flash the old recovery first ....from one of my threads ..follow full guide by flash no dm-verity ..THEN install new recovery via old twrp recovery ...the "NEW" recovery has errors so be warned :good:that will work
Go look in one of my guides for woods for old files
Click to expand...
Click to collapse
Thank you for taking the time to help out! Today I somehow got lucky after I reflashed it again, after having spent the morning deciphering the Chinese recovery which occasionally appeared. Rebooting into recovery inside TWRP held it stable. I manage to flash one custom rom, Dot Os, the Lineage OS for Moto E4 Woods got a TWRP message the zip wasn't correct (though I trust it was) and my backup made by TWRP did not restore. Is this what you mean by the errors? Very lucky to have a working Dot Os, and maybe I'll wait until an official TWRP is available now. Since I lost it again by forgetting to flash SuperSu again at the install of the custom rom....
Will look through your posts to find the guide with the files to have them at the ready Happy New Year's Eve!

[email protected] said:
Thank you for taking the time to help out! Today I somehow got lucky after I reflashed it again, after having spent the morning deciphering the Chinese recovery which occasionally appeared. Rebooting into recovery inside TWRP held it stable. I manage to flash one custom rom, Dot Os, the Lineage OS for Moto E4 Woods got a TWRP message the zip wasn't correct (though I trust it was) and my backup made by TWRP did not restore. Is this what you mean by the errors? Very lucky to have a working Dot Os, and maybe I'll wait until an official TWRP is available now. Since I lost it again by forgetting to flash SuperSu again at the install of the custom rom....
Will look through your posts to find the guide with the files to have them at the ready Happy New Year's Eve!
Click to expand...
Click to collapse
Don't forget to join us on telegram
We have a lot going on and if we chat via one central chat development , bug fixing and general help happens fast .
https://t.me/joinchat/G3XDFEO7AR4fGdyBRfwVOw
http://telegra.ph/woods-development-01-07

twrp for 1762 ?
I can't seem to find TWRP-3.2.1.-0_woods_UNOFFICIAL.img annywhere on the internet
I found this but i don't realy trust that site.
https://romprovider.com/2017/12/twrp-3-2-0-moto-e4-xt1762-woods/

[SOLVED]My Moto G5 Plus boot into recovery mode after i flashed Security Patch

FIXED, Just type this adb command when you are in recovery mode....
Code:
adb shell dd if=/dev/zero of=/dev/block/platform/soc/7824900.sdhci/by-name/misc
Click to expand...
Click to collapse
Hi guys, i have an issue....
Moto g5 plus XT1680 LATAM
I flashed with Flash Fire (security patch) in my moto g5 plus rooted with SuperSU systemless and BL unlocked, but i reboot phone and it starts on recovery TWRP, then, i tried for 3 times but keeps starting on recovery mode.
After that, i tried to power up phone on booloader and then select START And it works, it's the only way that i can start phone normally, or wait for recovery starts and select reboot in bootloader mode because if i select reboot system ... keeps starting on recovery mode.
So, if i dont use bootloader and Select START, phone into recovery mode.
PLEASE, help me i tried with fastboot cmd [fastboot oem fb_mode_clear] not works, wipe /cache doesn't work too, i dont want to flash stock firmware. Can i fix this with a cmd or flashing stock img like boot.img / bootloader.img or something?
Thanks guys. :good:

BunnyHoo said:
Hi guys, i have an issue....
Moto g5 plus XT1680 LATAM
I flashed with Flash Fire (security patch) in my moto g5 plus rooted with SuperSU systemless and BL unlocked, but i reboot phone and it starts on recovery TWRP, then, i tried for 3 times but keeps starting on recovery mode.
After that, i tried to power up phone on booloader and then select START And it works, it's the only way that i can start phone normally, or wait for recovery starts and select reboot in bootloader mode because if i select reboot system ... keeps starting on recovery mode.
So, if i dont use bootloader and Select START, phone into recovery mode.
PLEASE, help me i tried with fastboot cmd [fastboot oem fb_mode_clear] not works, wipe /cache doesn't work too, i dont want to flash stock firmware. Can i fix this with a cmd or flashing stock img like boot.img / bootloader.img or something?
Thanks guys. :good:
Click to expand...
Click to collapse
I have the same problem when i select factory mode on bootloader then the phone starts only...
Otherwise it boots into twrp recovery

I have the same problem. Only boots into system via bootloader.
Otherwise it boots into twrp recovery.
After successfully booting into system it told me "system update failed".
I guess its because the system update routine is to be flashed via stock recovery and therefore its booting into recovery until it is flashed? Just guessing, but if so could I just flash the update manually?
Thanks in Advance :good:

same here, ps. thanks for the tip of boatloader !!

bubo23 said:
same here, ps. thanks for the tip of boatloader !!
Click to expand...
Click to collapse
np, i still w8 for a solution!, i try some methods but not seems to work

Xt1687 here - same issue. Can I get confirmation that flashing the stock firmware fixes it?

Sorry if I'm wrong you cannot update when bootloader unlock ,have to wait some one make a fash zip so we can fash on twrp

Same here, I have to go to Mount then check System and then Reboot, Bootloader and finally Start. It's very annoying. I tried some ADB commands but nothing seemed to work.

Update: So I got annoyed enough by it to finally flash a different rom, wiped /data /system /cache and installed
Cosmic-OS 3.1 Universe but still can only boot via bootloader...
Any suggestions? Do I have to reformat the whole phone in bootloader via Computer?
Thanks in advance :good:

Finally found a fix, might not work for everyone though. Thanks to @aughtnaut:
https://forum.xda-developers.com/showpost.php?p=74109609&postcount=65

jcags said:
Finally found a fix, might not work for everyone though. Thanks to @aughtnaut:
https://forum.xda-developers.com/showpost.php?p=74109609&postcount=65
Click to expand...
Click to collapse
I'll try bro, thanks.:good:

jcags said:
Finally found a fix, might not work for everyone though. Thanks to @aughtnaut:
https://forum.xda-developers.com/showpost.php?p=74109609&postcount=65
Click to expand...
Click to collapse
IT WORKS!!!!, THANKS A LOT!.
Just TYPE FIRST CODE and see the magic!

It worked, thanks for the link!

Hello i have a probleme twrp in my moto g5 plus i unlock bootloader i install twrp but if i want to make a reboot into twrp didnt work . The one methode for reboot into twrp is reboot bootloader and press star , plz i need a solution for normal reboot

Nokia 5 unable to install Recovery

So I gave my IMEI, serial number and $5 to someone on the internet, and in return I got an email attachment to flash to my phone. So I did, and it unlocked the bootloader. Strangely enough, now I'm getting a stupid yellow message that my device is unlocked and can't be trusted, and it's a bit of a roundabout way to get into bootloader or recovery. One ONLY works with buttons, the other ONLY with adb.
Ok, never mind, so I tried installing both the 3.1.1. and 3.2.1 of TWRP custom recovery, but I am unable to boot into it to make it stick. On top of that, my phone now says "encrypted"? WTF?
Clearly this latest incarnation of Nokia is a bunch of asswipes, offering us Sophie's choice instead of just unlocking the damn things from the start, so there's no point in asking them for help, but I'd expect members here would be able to help?
Any ideas how to proceed? Is there a factory ROM somewhere? This is 7.1.2. by the way, I'm not interested in updating. Come to think of it, I hate this so-called "progress" with convoluted "security" and whatnot. Just give me the damn phone and go away, Google+Nokia. Stick your "features" up ya clacker.

1. Okk first you jeed to go this link and download official recovery for nokia 5 running android 8.1 oreo
https://drive.google.com/file/d/1Cl1...w?usp=drivesdk
2. Rename it to twrp and give the command to flash the recovery.
3. After give command fastboot flash recovery twrp.img. Give the command fastboot boot twrp.img
And boooom you enter in official twrp

Jitender Baloda said:
1. Okk first you jeed to go this link and download official recovery for nokia 5 running android 8.1 oreo
https://drive.google.com/file/d/1Cl1...w?usp=drivesdk
2. Rename it to twrp and give the command to flash the recovery.
3. After give command fastboot flash recovery twrp.img. Give the command fastboot boot twrp.img
And boooom you enter in official twrp
Click to expand...
Click to collapse
Link broken. File doesn't exist

Try this
https://drive.google.com/file/d/1Cl1yV7tV_VsIC3XIWlCIJXmFfdDZGUbG/view?usp=drivesdk

Err... no, not quite.
1. Your link is (was) dead, but in any case I'd be wary of installing something stashed in a private Google drive folder... Thanks, but no thanks.
2. I have several versions of TWRP, that's not a problem.
3. I know the correct commands (yours are not), that's not a problem.
And boom - no, you don't end up in TWRP. You end up in system, because it overwrites the TWRP automatically UNLESS you reboot to it immediately after flashing, and THIS is the problem.
It turns out that Nokia needs to be plugged into CHARGER, not the PC, then holding Vol+ and Power button combination will do it. It took me more than a dozen tries, but it worked in the end.

Hi, I had the same problem. I've unlocked bootloader and I successfully installed TWRP and I can go to recovery but the problem is I can't boot the system as it stucks on download mode. Can you help?

Press volume up+volume down+power button at the same time for 7-8 second.