This is an initial work in progress which may or may not work for you. This worked for me and it may cause brick on other devices if tried. So don't try this unless you are ready to take the risk. And whatever happens i won't take the blame.
What is it?
When you unlock your device, mi unlock tool writes the unlock code in the devinfo partition. This is a partition dump of my device in its officially unlocked state. If you still wish to follow this guide, then continue or else look somewhere else. Again this is only tested on my device and may or may not work for you.
Download: Here
Extract the files.
Run your phone in edl mode
Open device manager or miflash and note your port number.
example: com10 or com4
run the unlock.bat file.
it will ask port number, enter the port number.
example: com10 or com4.
and press enter.
If your phone is in edl mode and has a proper port alloted with qualcomm hs-usb qdloader 9008(%port no%)
everything should work fine.
Will upload a few screen shots later.
rev
ttt
Not working .
Archit9169 said:
This is an initial work in progress which may or may not work for you. This worked for me and it may cause brick on other devices if tried. So don't try this unless you are ready to take the risk. And whatever happens i won't take the blame.
What is it?
When you unlock your device, mi unlock tool writes the unlock code in the devinfo partition. This is a partition dump of my device in its officially unlocked state. If you still wish to follow this guide, then continue or else look somewhere else. Again this is only tested on my device and may or may not work for you.
Download: Here
Extract the files.
Run your phone in edl mode
Open device manager or miflash and note your port number.
example: com10 or com4
run the unlock.bat file.
it will ask port number, enter the port number.
example: com10 or com4.
and press enter.
If your phone is in edl mode and has a proper port alloted with qualcomm hs-usb qdloader 9008(%port no%)
everything should work fine.
Will upload a few screen shots later.
Click to expand...
Click to collapse
tried twice but was unable to unlock
milankumarn said:
tried twice but was unable to unlock
Click to expand...
Click to collapse
Describe me the whole procedure.
Did the files flashed successfully.
Were there any problems aside from not unlock.
What was written in the cmd window.
A screen shot of the cmd windows after the process is done.
What port no did you input in it.
Archit9169 said:
Describe me the whole procedure.
Did the files flashed successfully.
Were there any problems aside from not unlock.
What was written in the cmd window.
A screen shot of the cmd windows after the process is done.
What port no did you input in it.
Click to expand...
Click to collapse
1.booted into fastboot mode then EDL mode
2.ran the bat file.
3. rebooted
here are the screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
milankumarn said:
1.booted into fastboot mode then EDL mode
2.ran the bat file.
3. rebooted
here are the screenshots
View attachment 3988863
View attachment 3988864
View attachment 3988865
Click to expand...
Click to collapse
Is your phone fine...no bootloops or anything wrong.
Maybe it is tied with the device. I have to read and edit it.
Wait for a few days and ill try to mod it to be universal.
For info it works fine in mine. I used it to unlock and the device was working fine.
Archit9169 said:
Is your phone fine...no bootloops or anything wrong.
Maybe it is tied with the device. I have to read and edit it.
Wait for a few days and ill try to mod it to be universal.
For info it works fine in mine. I used it to unlock and the device was working fine.
Click to expand...
Click to collapse
No there is no bootloop and i did not notice any problem after doing it.
and that might be the problem .. please let me know when you mod it to be used universal.
just tried it. said that it was successful but then on resets it bootloops (tries to boot twice) then black. When i check device info it says false.
edit: recovery also doesnt work anymore. I had flashed zcx twrp.
neoblast said:
just tried it. said that it was successful but then on resets it bootloops (tries to boot twice) then black. When i check device info it says false.
edit: recovery also doesnt work anymore. I had flashed zcx twrp.
Click to expand...
Click to collapse
Sorry to hear that. Just use edl mode to flash the rom again. Or wait for a few hours and ill make an undo script.
Can you help me with my problem?
I sent a request to unlock my bootloader.They accepted it, but if i try to unlock it through miflashunlock program,at 50% it says "Couldn't verify device" and under this error it says "No need to unlock this device".
I saw people got errors that they don't have the same mi account logged in the program and on the phone, but i have a different error...
I have Redmi Note 3 Pro
Android version : 5.1.1 LMY47V
MIUI Version : MIUI Global 7.4 Stable
7.4.9.0(LHOCNDD)
Scrapperr said:
Can you help me with my problem?
I sent a request to unlock my bootloader.They accepted it, but if i try to unlock it through miflashunlock program,at 50% it says "Couldn't verify device" and under this error it says "No need to unlock this device".
I saw people got errors that they don't have the same mi account logged in the program and on the phone, but i have a different error...
I have Redmi Note 3 Pro
Android version : 5.1.1 LMY47V
MIUI Version : MIUI Global 7.4 Stable
7.4.9.0(LHOCNDD)
Click to expand...
Click to collapse
I have the same thing appeared when i tried to unlock mokee bl as it can be unlocked without a token from fastboot command.
Just unlock it from fastboot command that is
Code:
fastboot oem unlock-go
---------- Post added at 08:37 AM ---------- Previous post was at 08:32 AM ----------
Archit9169 said:
Sorry to hear that. Just use edl mode to flash the rom again. Or wait for a few hours and ill make an undo script.
Click to expand...
Click to collapse
I think they have to unlock from fastboot after flashing devinfo partition
Camlin3 said:
I have the same thing appeared when i tried to unlock mokee bl as it can be unlocked without a token from fastboot command.
Just unlock it from fastboot command that is
Code:
fastboot oem unlock-go
---------- Post added at 08:37 AM ---------- Previous post was at 08:32 AM ----------
I think they have to unlock from fastboot after flashing devinfo partition
Click to expand...
Click to collapse
No. It was my partition dump and i unlocked officially.
I dont know why people say they have trouble unlocking.
My only trouble was that i had to wait a while to get the unlock permission.
And my other problem that without using miunlock i cant unlock it again.
I mean everytime i have to unlock i have to login to that damn program.
Scrapperr said:
Can you help me with my problem?
I sent a request to unlock my bootloader.They accepted it, but if i try to unlock it through miflashunlock program,at 50% it says "Couldn't verify device" and under this error it says "No need to unlock this device".
I saw people got errors that they don't have the same mi account logged in the program and on the phone, but i have a different error...
I have Redmi Note 3 Pro
Android version : 5.1.1 LMY47V
MIUI Version : MIUI Global 7.4 Stable
7.4.9.0(LHOCNDD)
Click to expand...
Click to collapse
Download miui 8.11.3 and flash it using edl.
After that boot into fastboot and unlock your bootloader.
Do not wait for the first boot.
neoblast said:
just tried it. said that it was successful but then on resets it bootloops (tries to boot twice) then black. When i check device info it says false.
edit: recovery also doesnt work anymore. I had flashed zcx twrp.
Click to expand...
Click to collapse
Try flashing miui 8.11.3 and then use my program. Maybe it is vecause of different bootloader.
Archit9169 said:
Download miui 8.11.3 and flash it using edl.
After that boot into fastboot and unlock your bootloader.
Do not wait for the first boot.
Click to expand...
Click to collapse
U mean, 6.11.3 .i know that is your dev- info partition but is there any one who give a try to unlock from fastboot after flashing ur partition
Edit:- i too want to dump my dev-info in img .is it just dd command will do the stuff.(i too find it hazy to use that **** of crap
Camlin3 said:
U mean, 6.11.3 .i know that is your dev- info partition but is there any one who give a try to unlock from fastboot after flashing ur partition
Edit:- i too want to dump my dev-info in img .is it just dd command will do the stuff.(i too find it hazy to use that **** of crap
Click to expand...
Click to collapse
Yes just flash 6.11.3 using edl. Then use miunlock tool to unlock. It will work without any problem.
Some who tried to flash my partition either had no changes, bootloader remained locked or either had bootloops in which they had to flash using edl again.
Yes that will work.
Archit9169 said:
Yes just flash 6.11.3 using edl. Then use miunlock tool to unlock. It will work without any problem.
Some who tried to flash my partition either had no changes, bootloader remained locked or either had bootloops in which they had to flash using edl again.
Yes that will work.
Click to expand...
Click to collapse
Mine is already unlocked officially in july, only suggesting for struggling folks.
Yeah dd went well
thanks for sharing it
Archit9169 said:
Download miui 8.11.3 and flash it using edl.
After that boot into fastboot and unlock your bootloader.
Do not wait for the first boot.
Click to expand...
Click to collapse
Why 6.11.3 and not another version? I can't find a link to download,they keep sending me to this site http://en.miui.com/download-301.html#439 but the oldest firmware i can find is 6.11.24
Related
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
Reboot to EDL mode from FASTBOOT!
No more Test Point Method needed
Technical Details:
Redmi Note 3 support rebooting to EDL in Android Bootloader aboot module (the "reboot-edl" command) but fastboot utility doesn't recognize "reboot-edl" in the command line and refuses to sent the command to the device. Since FastBoot command protocol is simple and text-based, it is enough to send a packet containing "reboot-edl" text over USB. The simplest way to do that is to patch Windows fastboot.exe file, replacing "reboot-bootloader" text with "reboot-edl". As "reboot-bootloader" string is found in the command line, fastboot.exe sends the same constant string to the device. So if "reboot-bootloader" is replaced with "reboot-edl", you can specify "reboot-edl" in the command line and the same text will be sent to the device.
New Update: Fastboot updated to latest version.
Tutorial:
1. Download the Fastboot_edl-v2.zip from Here.
2. Extract the zip in your desktop
3. Open the folder and double Click on Reboot.bat
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Reboot your device to Fastboot Mode by pressing
Vol Down + Power button and connect your device with PC and Press Enter.
5. Your Device will be rebooted to EDL!
6. Now flash your Fastboot Rom with Mi Flash Tool to Unbrick your Mi Note 3.
Proof:
Thanks to @emuzychenko for the Idea!
This is AWESOME!! Just tested and worked amazingly.
Thank you!
Edit: the included command prompt didn't work for me though, launched standard and traversed to this folder
It would've been better if the source of this guide is also mentioned, just my thoughts
Sent from my Redmi Note 3 using XDA-Developers mobile app
Harish_Kumar said:
It would've been better if the source of this guide is also mentioned
Click to expand...
Click to collapse
Especially since most of text had been copied "as is".
Please add this to op
=> https://youtu.be/-6uErg52nKs
kaushal64 said:
Please add this to op
=> https://youtu.be/-6uErg52nKs
Click to expand...
Click to collapse
I have updated the fastboot.exe and the method also. Update your video with this and I will add it to OP.
I had replaced link for modified fastboot file please add it to op.
Harish_Kumar said:
It would've been better if the source of this guide is also mentioned, just my thoughts
Click to expand...
Click to collapse
emuzychenko said:
Especially since most of text had been copied "as is".
Click to expand...
Click to collapse
Thumbs up!
This is great
My problem solved
Many thanks
not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...
Zarko007 said:
not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...
Click to expand...
Click to collapse
Send me your current emmc_appsboot.mbn and I will check what is happening wrong there.
BRoy_98 said:
Send me your current emmc_appsboot.mbn and I will check what is happening wrong there.
Click to expand...
Click to collapse
Where to find it?
Zarko007 said:
Where to find it?
Click to expand...
Click to collapse
You can find it in the fastboot rom. Or if you have recovery rom, then go to the firmware-update folder in the zip there you will find it.
BRoy_98 said:
You can find it in the fastboot rom. Or if you have recovery rom, then go to the firmware-update folder in the zip there you will find it.
Click to expand...
Click to collapse
Maybe stupid question, but wouldn't phone go to edl mode (with red led flashing) before flashing rom and what then mbn file has to do? According to your manual it is the last step?
thanks
Zarko007 said:
not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...
Click to expand...
Click to collapse
Is your device bricked or you want to flash an official miui rom? Since your rom looks like a distributor rom not an official rom.
Sent from my kenzo using Tapatalk
sator02 said:
Is your device bricked or you want to flash an official miui rom? Since your rom looks like a distributor rom not an official rom.
Sent from my kenzo using Tapatalk
Click to expand...
Click to collapse
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....
Zarko007 said:
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....
Click to expand...
Click to collapse
Don't use this tool if your device is not bricked, your rom is a distributor rom that's why you cannot unlock your device, you have to flash miui rom prior to unlocking, you can do it thru edl mode using adb, search on miui forums and you'll find it.
Edit: check this out: http://en.miui.com/thread-235865-1-1.html
Sent from my kenzo using Tapatalk
Zarko007 said:
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....
Click to expand...
Click to collapse
If your device is not bricked, then you can reboot to EDL mode from adb. Do this to reboot to edl from adb:
1. Connect your device to PC.
2. Open adb and type: adb devices and press enter to see your device if it is connected properly.
3. When you can see your device ID, type: adb reboot edl and press enter. It will reboot your device to EDL mode.
4. Now flash your rom with Mi Flash.
BRoy_98 said:
If your device is not bricked, then you can reboot to EDL mode from adb. Do this to reboot to edl from adb:
1. Connect your device to PC.
2. Open adb and type: adb devices and press enter to see your device if it is connected properly.
3. When you can see your device ID, type: adb reboot edl and press enter. It will reboot your device to EDL mode.
4. Now flash your rom with Mi Flash.
Click to expand...
Click to collapse
I have tried it already many Times but no success...
Zarko007 said:
I have tried it already many Times but no success...
Click to expand...
Click to collapse
This must be driver problem. Install MI PC suite and it will install all necessary drivers. Then try it again.
After trying to flash the latest 7.1.1 cm 14 ropms many people ended up in bootloop where your phone switch on ,shows mi logo and rebbot again. Many where not able to enter recovey mode also.. Now i come up with a perfect soluton for you all on how to fix these issues in your phone..Lets Get started..
If anything goes wrong iam not responsible.Do it At your Own Risk.
Requirements
------------------
1. Enter edl .rar (attached below)
2.Miui Stock Rom (FastBoot). Download it from(only use this version) here
3.Phone Must have Charge of 50% or more.
4.Unlock Boot loader.zip (Attched Below)
6.MIPhone Tools and install it .Get it from here
6.Extract all the file
7. PDA Net.(Optional,but installing will be useful). Get it from here
Once you have all of the file we can move on
Steps
------
1. Put Your Phone into fastboot mode by pressing Vol Down and power button at same time.
2.Connect your Phone With Your PC
3.Run EDL Mode.exe from the zip Enter edl.. Now your phone must be in edl mode. You can see a light blinking at the top of your phone.
4. From the Unlock Boot Loader folder copy "emmc_appsboot.mbn" to the rom folder ie)
kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global--> images--> paste it there (replace/overwrite if existing)
5. Once the above step is done, Open MIFlash tool as administrator. Browse the folder
kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global and select it..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6.From the drop Down Menu Select Advanced.
7.Set Fastboot Script As Flash_ALL.Bat.
8.Set Flash Programmer As prog_emmc_firehose_8976_ddr.mbn from images folder.
9. Set RAW Xml File as rawprogram*.xml from images folder
10. Set Patch XML File as patch*.xml from images folder.
11. Video Help HERE.... Watch from 2.40 (Ignore the other portion,We dont need that Part)
Special [email protected] for the video.. I didn't made that video..
12. Once The Above step is done. Click REFRESH OPTION,and you will see Phone detected By The Name COMXX.(XX will be a number)
13.Click Flash and Wait for some time and allow the phone to reboot.
14.Once all the step is done your phone will be good to use..:fingers-crossed: :fingers-crossed:
UNLOCKING BOOT LOADER AND INSTALLING TWRP AGAIN
-------------------------------------------------------------------------
1.Once Your Phone Reboots successfully enable USB Debugginf From Developer Option.
2.Connect Your phone to your PC and Open CMD as administrator.
3.Type in "adb devices".
4. Cmd will show a random number and Device (Everyone will be knowing this,but for info only iam writing it here)
5.Type "adb reboot bootloader". Now your phone will boot into fastboot mode.
6.Type "fastboot oem device-info" to get device status.
7.Type "fastboot oem unlock-go" to unlock bootloader.
8.Again type "fastboot oem device-info" to check to find if device is unlocked.(Do not reboot YET)
9. Now Downlaod TWRP from HERE
10. Now Got to the folder containig TWRP . By holding the Shift Key Of key Board ,right click the mouse and select OPEN COMMAND WINDOW HERE.
11. Type "fastboot flash recovery recovery_filename.img"
12.Type "fastboot reboot".
You Phone will be good to go. If anything goes wrong or you have any doubt Comment Below do not pm me..i will not reply..
If this thread helpef you thumbs up and do comment and shre this post
So i do not need to unlock the boot loader before using MiTool to flash phone via EDL
ahh988 said:
So i do not need to unlock the boot loader before using MiTool to flash phone via EDL
Click to expand...
Click to collapse
Nope if phone is bricked enter fastboot mode and run enter edl.exe to enter edl,flash ROM using mi flash tool
adithyan25 said:
Nope if phone is bricked enter fastboot mode and run enter edl.exe to enter edl,flash ROM using mi flash tool
Click to expand...
Click to collapse
I did that but phone is still stuck . I'm getting infinite boot animation ?
ahh988 said:
I did that but phone is still stuck . I'm getting infinite boot animation ?
Click to expand...
Click to collapse
Boot animation or simply mi logo and then vibrating and again rebooting???
If mi flash tool shows successfully done without any errors then
Try this
Roeboot to fast boot and type
fastboot oem unlock-go
I guess it will be fixed
adithyan25 said:
Boot animation or simply mi logo and then vibrating and again rebooting???
If mi flash tool shows successfully done without any errors then
Try this
Roeboot to fast boot and type
fastboot oem unlock-go
I guess it will be fixed
Click to expand...
Click to collapse
I am stuck at boot animation with the three white dots spinning for ever ? will try to do as you said
I tried fastboot oem unlock-go but i get response: token verification failed and device still stuck on bootanimation
well, i think this caused by relocking bootloader after we flash a new firmware. if that happens, just go in fastboot mode by hold power button + volume down, then unlock it again using mi unlock. reboot it..your twrp is back.
no need to enter edl mode & install twrp again, btw thanks..this is helpful
nitephoenix said:
well, i think this caused by relocking bootloader after we flash a new firmware. if that happens, just go in fastboot mode by hold power button + volume down, then unlock it again using mi unlock. reboot it..your twrp is back.
no need to enter edl mode & install twrp again, btw thanks..this is helpful
Click to expand...
Click to collapse
always my pleasure
For some mi unlock stucks at 50%.. I was one of them...every time I try fails...so I found this was the only way for those who can't access it using mi unlock
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
nitephoenix said:
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
Click to expand...
Click to collapse
Yeah...I know that...but it does not support volte. .only abhisheks fw sprt volte
nitephoenix said:
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
Click to expand...
Click to collapse
@nitephoenix
Can we then flash update marshmallow global firmware this way? (Just delete emmc apsbot.mbn file inside the firmware). Thanks
Pleroma said:
@nitephoenix
Can we then flash update marshmallow global firmware this way? (Just delete emmc apsbot.mbn file inside the firmware). Thanks
Click to expand...
Click to collapse
don't flash official miui from twrp (you better do it in edl mode), but yes you can flash custom miui like miui eu, miuipro, multirom, epic miui etc from twrp. and..after u delete the emmc file inside the firmware which is included on every miui rom, your bootloader will be safe
nitephoenix said:
don't flash official miui from twrp (you better do it in edl mode), but yes you can flash custom miui like miui eu, miuipro, multirom, epic miui etc from twrp. and..after u delete the emmc file inside the firmware which is included on every miui rom, your bootloader will be safe
Click to expand...
Click to collapse
I used to flash it via twrp ..(by deleting bootllader file) followed by flashing lazyflasher...I didn't faced any prblm yet
Mine behaves different
I tried restoring the backup it started to back up and completed sucessfully but when i reboot there comes Mi logo and again it boots to TWRP Recovery .... Same case with any ROM ... Kindly tell me what to do.
ZCX recovery i have.
sarabeshsab said:
I tried restoring the backup it started to back up and completed sucessfully but when i reboot there comes Mi logo and again it boots to TWRP Recovery .... Same case with any ROM ... Kindly tell me what to do.
ZCX recovery i have.
Click to expand...
Click to collapse
Probably the problem with bootloader file
not a whole lot of talk anywhere else so i'll try here. i just got my kenzo few days ago, jumped the gun and started trying to get twrp on it. i'm assuming the bootloader was locked. As of right now it wont boot up, its in edl mode maybe... red led flashes and i can upgrade driver to 9008. sometimes its recognized by miflash and when it is and i try to flash stock fastboot it gives me an error. i know thats a lot to take in but i'm trying to cover all my bases. the phone came from overseas so sending it back isnt really an option. any help is appreciated.
Jjleininger said:
not a whole lot of talk anywhere else so i'll try here. i just got my kenzo few days ago, jumped the gun and started trying to get twrp on it. i'm assuming the bootloader was locked. As of right now it wont boot up, its in edl mode maybe... red led flashes and i can upgrade driver to 9008. sometimes its recognized by miflash and when it is and i try to flash stock fastboot it gives me an error. i know thats a lot to take in but i'm trying to cover all my bases. the phone came from overseas so sending it back isnt really an option. any help is appreciated.
Click to expand...
Click to collapse
Download eiter China based ROM or ROM from post.
Mi flash tool have many prolems.
Some tips:-
Make sure driver enforcement is disabled in PC.
All drivers including PDA net is installed.
Copy paste the unlocked bootloade file inside images folder and replace original one. Even after tryig this method it fails try my other method unbrick viafasrboot
uhm, this does not work for some reason...
i did everything as you said but in the end it just says cathasrophic error and something
After flashing i get Mi logo, vibration and reboot, please help
Guys is that a way to root redmi 3s without unlocking bootloader?
Edit: Practically it's not possible....Unlock bootloader first then install twrp now root in just 7 days.
Note: Don't use any tricks available in forums and it won't work, just wait minimum 6days after U get permission because ur profile will get update to mi server slowly and it takes time then after 6th day use miunlock otherwise U will get 50% error.
Requirements: switch on OEM unlock and debug option that's all and login in to the same mi account which U got permission.
Please refer: http://en.miui.com/thread-298586-1-1.html
I guess so.. It can be done with MiFlash Tool (EDL)
SILF0X said:
I guess so.. It can be done with MiFlash Tool (EDL)
Click to expand...
Click to collapse
tried but failed so i think we need unlocked bootloader...
First thing first..
1. Download and install latest MiFlashTool
2. Reboot into EDL mode
3. Flash this like you flash fastboot rom using MiFlashTool
TWRP FLASHER
If you're done, please let me know..
Note: only for redmi 3s/Prime/3x
SILF0X said:
First thing first..
1. Download and install latest MiFlashTool
2. Reboot into EDL mode
3. Flash this like you flash fastboot rom using MiFlashTool
TWRP FLASHER
If you're done, please let me know..
Note: only for redmi 3s/Prime/3x
Click to expand...
Click to collapse
But it needs unlocked bootloader right? Did u tried it
drganbds said:
But it needs unlocked bootloader right? Did u tried it
Click to expand...
Click to collapse
I made this tool, of course i tried it.
Just flash this package, you'll get TWRP installed. Even if you're on locked bootloader. After that, you can flash SuperSU.
Just try it..
SILF0X said:
I made this tool, of course i tried it.
Just flash this package, you'll get TWRP installed. Even if you're on locked bootloader. After that, you can flash SuperSU.
Just try it..
Click to expand...
Click to collapse
Flash through updater app? Why can't u make this as public and as for as I search a lot in Google forums they told without unlock u can't root our device and im using 3s+ variant.
drganbds said:
Flash through updater app? Why can't u make this as public and as for as I search a lot in Google forums they told without unlock u can't root our device and im using 3s+ variant.
Click to expand...
Click to collapse
Flash it using the latest MiFlashTool.
I found it yesterday, doesn't have much time to publish it.
Redmi 3s+ ? Maybe its Redmi 3x?
SILF0X said:
Flash it using the latest MiFlashTool.
I found it yesterday, doesn't have much time to publish it.
Redmi 3s+ ? Maybe its Redmi 3x?
Click to expand...
Click to collapse
In MI flash tool latest tried but it does nothing and didn't flash anything. Do I need to put in fastboot mode manually?
drganbds said:
In MI flash tool latest tried but it does nothing and didn't flash anything. Do I need to put in fastboot mode manually?
Click to expand...
Click to collapse
You have to enter EDL mode.
adb reboot edl
SILF0X said:
You have to enter EDL mode.
adb reboot edl
Click to expand...
Click to collapse
Edl means downloader mode right? then in mi flash i have to select the entire .zip file or the recovery.img alone?
drganbds said:
Edl means downloader mode right? then in mi flash i have to select the entire .zip file or the recovery.img alone?
Click to expand...
Click to collapse
How To Boot Into EDL Mode :
1. Turn off your phone completely.
2. Press Volume Up (+) and Power buttons simultaneously. This will bring your phone into Recovery Mode.
3. You will see several options in Recovery menu. Choose “Downloadâ€
4. Your phone should reboot into Download mode / EDL.
5. Finally you can connect it to PC using its USB cable.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download : MiFlash (Beta)
a. Extract TWRP_FLASHER_HM3SX.zip into D:\TWRP_FLASHER_HM3SX
b. Run MiFlash and select folder D:\TWRP_FLASHER_HM3SX that contains flash_all.bat
c. Select "clean all"
d. Select "Refresh"
e. Select "Flash"
SILF0X said:
How To Boot Into EDL Mode :
1. Turn off your phone completely.
2. Press Volume Up (+) and Power buttons simultaneously. This will bring your phone into Recovery Mode.
3. You will see several options in Recovery menu. Choose “Downloadâ€
4. Your phone should reboot into Download mode / EDL.
5. Finally you can connect it to PC using its USB cable.
Download : MiFlash (Beta)
a. Extract TWRP_FLASHER_HM3SX.zip into D:\TWRP_FLASHER_HM3SX
b. Run MiFlash and select folder D:\TWRP_FLASHER_HM3SX that contains flash_all.bat
c. Select "clean all"
d. Select "Refresh"
e. Select "Flash"
Click to expand...
Click to collapse
Did as u told and it didn't flash twrp rather It showed success. Have u unlocked your bootloader?
Device can't go to EDL mode and it says device locked
Regarding to ur root with out unlocking bootloader
Dont get me Wrong guys
I already tried this method a long time ago..where my device is locked
Here's What i did.... before i have locked bootloader..i downloaded fastboot images put the device in edl mode and change the recovery file img to twrp img and rename it to recovery.img..And flash the All os files.. flashed successfully but still it shows stock recovery
that's why i'm wondering about that .
.And i changed the boot file to twrp image and rename it to boot .. it flashed the files succesfull But it stuck on mi logogo and lead me to qualocom diagonostic mode 900E Because of partioning mismatch [i guess ]
luckily i'm having fastboot because the flasher first flashes the bootloader and mbn files
i initiate
Code:
fastboot oem edl
command then i'm in edl mode and flashed the device to previous state ..After that i stopped the work it's a new phone guys [1 week ] i got feared
So my query is how it still can't boot into twrp recovery mode if it's flashed successfull in edl mode [ i checked the log file ]
I guess because of encryption process of system partition after flashing ..so again what i did is after flashing the fles immediatly i boot on to recovery still the device automatically loops .. and start encryption
Now i Need Some one who's bootloader is locked to continue my work/test
Here's My Contact info 7396884287. Named Tyson... Give Me a Missed Call
drganbds said:
Did as u told and it didn't flash twrp rather It showed success. Have u unlocked your bootloader?
Click to expand...
Click to collapse
yes, i unlock my bootloader. Sorry, my bad..
---------- Post added at 09:03 AM ---------- Previous post was at 08:55 AM ----------
Tyson12 said:
Dont get me Wrong guys
I already tried this method a long time ago..where my device is locked
Here's What i did.... before i have locked bootloader..i downloaded fastboot images put the device in edl mode and change the recovery file img to twrp img and rename it to recovery.img..And flash the All os files.. flashed successfully but still it shows stock recovery
that's why i'm wondering about that .
.And i changed the boot file to twrp image and rename it to boot .. it flashed the files succesfull But it stuck on mi logogo and lead me to qualocom diagonostic mode 900E Because of partioning mismatch [i guess ]
luckily i'm having fastboot because the flasher first flashes the bootloader and mbn files
i initiate
Code:
fastboot oem edl
command then i'm in edl mode and flashed the device to previous state ..After that i stopped the work it's a new phone guys [1 week ] i got feared
So my query is how it still can't boot into twrp recovery mode if it's flashed successfull in edl mode [ i checked the log file ]
I guess because of encryption process of system partition after flashing ..so again what i did is after flashing the fles immediatly i boot on to recovery still the device automatically loops .. and start encryption
Now i Need Some one who's bootloader is locked to continue my work/test
Here's My Contact info 7396884287. Named Tyson... Give Me a Missed Call
Click to expand...
Click to collapse
I try to flash twrp and mirecovery using that package, and it works. I'm on unlocked bootloader now
SILF0X said:
yes, i unlock my bootloader. Sorry, my bad..
---------- Post added at 09:03 AM ---------- Previous post was at 08:55 AM ----------
I try to flash twrp and mirecovery using that package, and it works. I'm on unlocked bootloader now
Click to expand...
Click to collapse
R u saying that you flash twrp & succeed to have twrp while your bootloader was locked.
Sent from my Redmi 3S using XDA-Developers Legacy app
Tyson12 said:
R u saying that you flash twrp & succeed to have twrp while your bootloader was locked.
Sent from my Redmi 3S using XDA-Developers Legacy app
Click to expand...
Click to collapse
I meant that succeed to have twrp while the bootloader was unlocked.
Tyson12 said:
Here's What i did.... before i have locked bootloader..i downloaded fastboot images put the device in edl mode and change the recovery file img to twrp img and rename it to recovery.img..And flash the All os files.. flashed successfully but still it shows stock recovery
Click to expand...
Click to collapse
You said that you flash twrp.img in edl mode, flashed successfully, but still it shows stock recovery.
i flash twrp.img in edl mode too. Flash successfully, and it shows TWRP.
R u already download my package?
SILF0X said:
I meant that succeed to have twrp while the bootloader was unlocked.
You said that you flash twrp.img in edl mode, flashed successfully, but still it shows stock recovery.
i flash twrp.img in edl mode too. Flash successfully, and it shows TWRP.
R u already download my package?
Click to expand...
Click to collapse
U r package is working for unlocked bootloader..
But in my case my bootloader is locked..
So...
Sent from my Redmi 3S using XDA-Developers Legacy app
Guys I'm stuck at 50% always( couldn't verify device) in MI flash tool please help on unlock.
How u guys had unlock without errors?
NOTICE: This tutorial only works for Snapdragon 415 variant, and i am currently working on the SD616 variant. thanks for understanding.
hello ladies and gentlemen,
in this tutorial i'll show you how to install TWRP into Vibe K5 a41 variant, which is known for having an un-unlockable bootloader, and flashing using traditional ways like fastboot won't work.
But if you go low-level, you can ignore the bootloader.
To be honest, i found this tut long ago on the internet, so i thought it would be good to recreate it by updating it. Thanks for those who came with this awesome idea.
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features
included in the products you find here before flashing!
YOU are choosing to make these modifications, and
if you point your finger at me for messing up your device, I will
laugh at you. A lot.
Anyway,
STEP 1
First reboot your windows with driver signature enforcing disabled.
Ref.: [url]https://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/[/URL]
You can also run (as admin ofc)
Code:
bcdedit.exe /set nointegritychecks ON
. However, i did not test it.
STEP 2
Then install the drivers and qfil.
https://mega.nz/#!1Dpy0JaK!D_D5JWnjUzi9rGRWCsnTHekgBd6MiEMv5Rrawl4PVvA
STEP 3
run
Code:
adb reboot edl
to reboot into download mode.
how to install adb: [url]https://www.xda-developers.com/install-adb-windows-macos-linux/[/URL]
Make sure your phone appers as a COM port in Device Manager (and QFIL)
STEP 4
Select as in screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Vibe K5: https://mega.nz/#!hXxiwazQ!kRSfPAMm28v8ZOnMepy6ir65Brqmyv9gC2Fx83siMi8
Vibe K5 plus: https://mega.nz/#!sbBUVC7C!FF9abiFe7MXD-VT3O8opwqs_NnKOVJedK6l72goFGYo
Download these accordingly to your SoC and extract anywhere you like.!!!THESE FILES ARE OBSOLETE. DOWNLOAD FROM THE BOTTOM OF THE POST!!!
I have tested this on my SD415 device. SD616 users may need the "k5 plus" file. Do at your own risk.
Also, i'm in no way responsible for anything you flash through recovery.
have fun!!!
UPDATE 21.03.18: i kinda changed the technic how this tutorial works. Now instead of flashing the files above i will give you stock roms with twrp built in for you to flash. just don't forget to boot into recovery so that stock rom does not overwrite the twrp.
phones with Snapdragon 616: https://mega.nz/#!H7RTUQbR!5P6ZP4F_rcuFR2DYuJ63M4z1U6hfqKpYx5PfTPtsSTkThese files appear not to work. Flash if you are okay with no cellular connection.
phones with Snapdragon 415: https://mega.nz/#!PmgGGI6I!9Gda2ZHNNG6lE_0dt4ag11Ng6Q1v_2DxgCGsFOHcga4
to find out what chipset you have, look at specs on your original box.
Some Notes:
+ to run qfil, go to Program files (x86) folder and find there qfil exe. Make sure to run as admin.
+ if you get sahara error, that's likely because of misconfigured drivers.
Sahara error
Thanks for the tutorial ... but i get the Sahara error, how can I solve this or the misconfigured drivers?
Regards!
ceanunez said:
Thanks for the tutorial ... but i get the Sahara error, how can I solve this or the misconfigured drivers?
Regards!
Click to expand...
Click to collapse
first, make sure you are running windows in test mode (driver signature disabled mode). Run cmd as admin, type "bcdedit /set testsigning on" without quotes.
After a reboot, connect your phone to pc in download mode and open Device Manager (run: devmgmt.msc). if your device shows up as "QUALCOMM HS-USB" or similar, then your drivers are fine.
Which way did you take to get into download mode?
PS: to get out of test mode, type "bcdedit /set testsigning off".
UPDATE: new download links
windows sees the phone as a qualcom device, everything is okay with the drivers but sahara fails, please help
Pandemicc said:
windows sees the phone as a qualcom device, everything is okay with the drivers but sahara fails, please help
Click to expand...
Click to collapse
what model number and what SoC do you have?
eurodiesel said:
what model number and what SoC do you have?
Click to expand...
Click to collapse
model: a6020a41
hw code: 49
i dont know what do you mean by soc, so i send the hw code. if you ask for completely another thing, tell me that how can i find it
Pandemicc said:
model: a6020a41
hw code: 49
i dont know what do you mean by soc, so i send the hw code. if you ask for completely another thing, tell me that how can i find it
Click to expand...
Click to collapse
SoC, or System on Chip, is what is called Snapdragon. in your case it is either Snapdragon 415 or 616. judging by your hw code, it must be SD616. plus, it must be written on your oem box.
try the link for vibe k5 plus, maybe that will solve sahara.
eurodiesel said:
SoC, or System on Chip, is what is called Snapdragon. in your case it is either Snapdragon 415 or 616. judging by your hw code, it must be SD616. plus, it must be written on your oem box.
try the link for vibe k5 plus, maybe that will solve sahara.
Click to expand...
Click to collapse
yes you are right, I have checked it and it is 616. please tell me that you can help me with that
Pandemicc said:
yes you are right, I have checked it and it is 616. please tell me that you can help me with that
Click to expand...
Click to collapse
follow tutorial step by step and use vibe k5 plus files
Hi,
i saw your answer in : https://forum.xda-developers.com/vi...p-a6020a41-t3745060/post75451263#post75451263
i have two questions.
1- i think drivers are true. because i can flash indian and device's factory stock rom with qfil. is it true?
2- i flahed custom roms after flashing twrp. but gsm network not exist too. is it possible extract modem.img of factory firmware? if i can extract it, i think i can flash it with fastboot.
thanks for your answers.
agritux said:
Hi,
i saw your answer in : https://forum.xda-developers.com/vi...p-a6020a41-t3745060/post75451263#post75451263
i have two questions.
1- i think drivers are true. because i can flash indian and device's factory stock rom with qfil. is it true?
2- i flahed custom roms after flashing twrp. but gsm network not exist too. is it possible extract modem.img of factory firmware? if i can extract it, i think i can flash it with fastboot.
thanks for your answers.
Click to expand...
Click to collapse
i have an idea: install lenovo moto smart assistant, select device rescue, enter your model name & hw code, and continue. it should be easy.
eurodiesel said:
i have an idea: install lenovo moto smart assistant, select device rescue, enter your model name & hw code, and continue. it should be easy.
Click to expand...
Click to collapse
i can return stock with qfil and factory image.
let me explain my issue again.
i can not install twrp on my device with factory image. with fastboot commands it says bootloader locked.
So i installed indian a40 rom. i can install twrp with fastboot command on indian rom. but on indian rom i do not have gsm network. so i need a41 modem.img i think.
i installed twrp on indian rom and installed custom roms but no signal again.
so i returned stock firmware with qfil. now everything is stock and i have gsm network signal. but no root no twrp no custom rom.
i want to install custom rom
agritux said:
i can return stock with qfil and factory image.
let me explain my issue again.
i can not install twrp on my device with factory image. with fastboot commands it says bootloader locked.
So i installed indian a40 rom. i can install twrp with fastboot command on indian rom. but on indian rom i do not have gsm network. so i need a41 modem.img i think.
i installed twrp on indian rom and installed custom roms but no signal again.
so i returned stock firmware with qfil. now everything is stock and i have gsm network signal. but no root no twrp no custom rom.
i want to install custom rom
Click to expand...
Click to collapse
thats ok. now follow the tutorial you're now on.
let me explain what i did:
since fastboot won't allow me to flash twrp, i did flash it forcefully via qfil.
if you've got sd415 chipset, then go for vibe k5 files.
if sd616 then vibe k5 plus files.
Download
---------- Post added at 04:21 PM ---------- Previous post was at 04:02 PM ----------
eurodiesel said:
first, make sure you are running windows in test mode (driver signature disabled mode). Run cmd as admin, type "bcdedit /set testsigning on" without quotes.
After a reboot, connect your phone to pc in download mode and open Device Manager (run: devmgmt.msc). if your device shows up as "QUALCOMM HS-USB" or similar, then your drivers are fine.
Which way did you take to get into download mode?
PS: to get out of test mode, type "bcdedit /set testsigning off".
Click to expand...
Click to collapse
I got the solution by this command: "bcdedit.exe /set nointegritychecks ON" ... I used the "adb reboot edl" command for download mode and now it works fine.
Thanks!
ceanunez said:
---------- Post added at 04:21 PM ---------- Previous post was at 04:02 PM ----------
I got the solution by this command: "bcdedit.exe /set nointegritychecks ON" ... I used the "adb reboot edl" command for download mode and now it works fine.
Thanks!
Click to expand...
Click to collapse
thank you very much. i'll add to tutorial sometime.
Edit: i've added it.
@agritux how's going? did you flash twrp?
eurodiesel said:
@agritux how's going? did you flash twrp?
Click to expand...
Click to collapse
i couldn't if i have twrp, i have no gsm signal
agritux said:
i couldn't if i have twrp, i have no gsm signal
Click to expand...
Click to collapse
did you follow the tutorial at the first post? did you flash using K5 Plus files?
because right now, i am using my a41 device with a locked bootloader running an Android Nougat based ROM, with all kinds of mods installed, and i am sure you can do it too.
PS: i live in Turkey too and i have no idea how all a41 users except me have a SD616. ? where did you buy your phone?
hi
I finally flashed successfully k5 plus files to my sd616 a41 device but the phone won't boot now, the device vibrates when I power it up but won't boot. can you help please?
So i try to use the DSU Loader found in Developer Options to flash a GSI, but i forget to unlock the OEM and turn on the usb debug.
After installing a DSU and rebooting, the phone will attempt to boot the GSI but it shows "Your device is corrupt" and will no longer boot.
That said, the phone boot to fastboot mode automatically. But all the options under fastboot is not working, i can't get into the recovery mode and my laptop can't identify my phone when i connect to it.
Is there anyone know how i can fix it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had the same problem and flashed the boot.img on it and it was fixed.
If that doesn't work you can follow this guide to restore the system (needs to be in fastbootd mode): https://www.droidwin.com/unbrick-nothing-phone-1-flash-stock-firmware-via-fastboot-commands/
misecia said:
I had the same problem and flashed the boot.img on it and it was fixed.
If that doesn't work you can follow this guide to restore the system (needs to be in fastbootd mode): https://www.droidwin.com/unbrick-nothing-phone-1-flash-stock-firmware-via-fastboot-commands/
Click to expand...
Click to collapse
Thanks mate
But you can do it even you haven't enable OEM unlock and USB debug before the phone get bricked?
-
i have the same problem.. only fastboot commands work, anything i do just reboots the phone back to same menu . cant enter fastbootd. i can flash all partitions apart from product..system and some other. these i get error on. i got the bootloader unlocked but thats about it. i also did DU in dev mode then corrupt device.. anyone got a fix for this??
xera3k said:
i have the same problem.. only fastboot commands work, anything i do just reboots the phone back to same menu . cant enter fastbootd. i can flash all partitions apart from product..system and some other. these i get error on. i got the bootloader unlocked but thats about it. i also did DU in dev mode then corrupt device.. anyone got a fix for this??
Click to expand...
Click to collapse
Do you have the latest android platform tools? Try different cables, different ports?
Yes this is a problem on the phone. . Vi tried Windows and Linux , i can send commmands but only Flash some partitions and dont have or cant access bootloader or fastbootd.. so im stuck :/
xera3k said:
Yes this is a problem on the phone. . Vi tried Windows and Linux , i can send commmands but only Flash some partitions and dont have or cant access bootloader or fastbootd.. so im stuck :/
Click to expand...
Click to collapse
Idk if its because of that but you have typo in that command, should be bootloader instead boodloader
What if have you tried to boot into another slot fastboot --active-slot
layz1319 said:
What if have you tried to boot into another slot fastboot --active-slot
Click to expand...
Click to collapse
What command would i use ?
xera3k said:
What command would i use ?
Click to expand...
Click to collapse
So you may want to use fastboot getvar current-slot to get what slot you are currently using. Then use fastboot --active-slot=(the opposite slot you are using) eg.fastboot --active-slot=a / fastboot --active-slot=b. Lastly, fastboot reboot
Ps. Sometimes fastboot --active-slot=a/b may not work so you can try with fastboot --active-slot= other to boot into non current slot. Anyway wish you all the best
layz1319 said:
So you may want to use fastboot getvar current-slot to get what slot you are currently using. Then use fastboot --active-slot=(the opposite slot you are using) eg.fastboot --active-slot=a / fastboot --active-slot=b. Lastly, fastboot reboot
Ps. Sometimes fastboot --active-slot=a/b may not work so you can try with fastboot --active-slot= other to boot into non current slot. Anyway wish you all the best
Click to expand...
Click to collapse
I also am having this issue and tried what you suggested and got this.
Any ideas on how to fix?
Eventually I was able to change the active slot but sadly still looping.
yquitumadbro said:
View attachment 5677361
Eventually I was able to change the active slot but sadly still looping.
Click to expand...
Click to collapse
Try to change it again. I solved with that.
Good evening, I have the same problem after using the DSU Loader, the mobile is stuck like the screenshot in the first post above. I've tried everything but can't unlock anything. Can someone help me ?
If your PC isn't detecting your device while in Fastboot mode, you don't have the correct drivers installed. This may help.
Never try to install non-factory software on a locked bootloader!
Since you didn't enable OEM unlocking, it's unlikely that you'll be able to recover your device. Still, focus on the driver issue for now and we can go from there. Do you have ADB Platform Tools installed?
I installed GSI directly from the smartphone, I don't think I used unofficial software. The pc recognizes the mobile phone in fastboot and I also tried with ADB platform tool, but every time I get the message of device blocked
Dominicus.1 said:
I installed GSI directly from the smartphone, I don't think I used unofficial software. The pc recognizes the mobile phone in fastboot and I also tried with ADB platform tool, but every time I get the message of device blocked
View attachment 5681643
Click to expand...
Click to collapse
ADB commands do not work in fastboot.
fastboot devices should show the device when connected in fastboot mode.
Try fastboot flashing unlock to unlock the bootloader, which will make recovering your device much easier.
I tried everything, Windows never found my device inn fastboot but i plugged om a Linux then voila. Everything works
xera3k said:
I tried everything, Windows never found my device inn fastboot but i plugged om a Linux then voila. Everything works
Click to expand...
Click to collapse
U can't do anything if u r OEM tab is off and you soft bricked and not booting to system.
If unr able to boot in recovery using fastboot menu there do format data it will boot to system