I was troubleshooting my home button that works from time to time.
So i flashed latest firmware for phone, but im pretty sure i flashed HOME_CSC instead of the normal CSC *FML*
So now when i boot download mode i cant choose by volume buttons, and booting download mode with "adb reboot bootloader" will just reboot rom normally...
Edit: Download mode boots, when using hardware buttons, but cant choose continue in download mode to be able to flash TWRP/Firmware with Odin again.
I guess if i could root it with some 1click method i could try issueing reboot bootloader command from root, but i guess that wont work either and there is no 1click methods AFAIK
Any suggestions?
Would usb-jig work to bypass bootloaders continue screen?
Are you able to boot into recovery?
Yeah i can boot into recovery, i can boot into bootloader too, but i cant press continue..
I can use the Phone semi normally, sometimes home, power or volume Buttons stop working though
In recovery all buttons work, but its the original recovery, so there is not much todo in it afaik?
Related
Hello guys, i'm having a problem, i had TWRP working fine, but i've installed a stock rom and it replaced TWRP with stock recovery, i did the Odin thingy again but now when i boot holding volume up+power+home it boots to download mode, and not to twrp... Also, is there some sort of bootloader/fastboot mode on this device? So i can use adb
Device is SM-T230NT
Try going for volume down instead of volume up. Bootloader is already unlocked and fastboot is download mode. Just open USB Debugging and you can access ADB
Hi, I have a GS4 (SCH-I545) and I was trying to get CWM recovery, so I used ROM Manager to flash it, and it only gave me the stock recovery, so I then tried Flashify, flashed CWM then I got Odin mode instead of a recovery mode, it said unable to boot in the top left, so I just tried to boot up recovery mode, still got Odin mode, and I couldn't boot my device unless I used the download mode method (Vol down + home + power to get to the warning screen, vol down to restart phone) so I guess I have no way to get to recovery mode, what do I do? Also I apologize for this huge run-on sentence.
You dump CWM, as it is outdated, and try TWRP.
You can either flash it with Odin (Instructions are on their site) or you can use flashify to flash the twrp.img.
Untick auto-reboot in Odin if you are using this method.
Is the sch-i545 from Verizon? I think it has a bootloader that may be locked, depending on the bootloader version on the phone.
Yes, it is a Verizon phone.
Now, considering the circumstances, try unlocking or patching the bootloader.
Bootloader unlock apps and methods may have no effect or brick the phone.
Usefulness thread here: http://forum.xda-developers.com/showthread.php?t=2500826
I followed the forum instructions to flash TWRP onto my N910F Note 4 according to instructions: https://forum.xda-developers.com/showpost.php?p=55277852&postcount=3
All works fine. But when I reboot into the bootloader I still get the original bootloaded with the "Downloading Do not turn off target" notice.
On that tutorial it does say at the end that if the recovery hasn't changed then to uncheck the auto-reboot option. Did that, but same again.
What could I do?
Download mode is nothing to do with recovery.
You flashed a custom recovery, therefore you'll need to boot into recovery, not bootloader (download mode in Samsung phones). Power off your phone, then hold power, home and vol up to access the recovery you just flashed.
Sometimes the phone indeed overwrites the newly flashed custom recovery with the stock one, in such cases it usually helps to disable auto reboot in Odin (as you did), holding power+home+both volume buttons to force a reboot, then booting back to download mode and flashing the recovery one more time. Happy flashing!
So here is my situation: SM-G950U with a fresh clean install of stock 9.0 firmware via Odin. Phone reboots, and begins setup. However, I'm met with FRP warning. No big deal, since I know a way around that, but I need to reboot to download mode first and install safestrap to do it. Problem is that neither button hold combination does anything except boot the phone normally. Vol up nor vol down + Bixby + Power provide results from a reboot or a powered off state, except boot the phone normally. I cannot use adb commands either because developer options are not yet enabled because I can't get passed the FRP screen. I should be able to access both modes regardless of what stage of setup the device is in, correct? I know I have before. Is this some kind of security patch? Is there any other way to get to download mode to use Odin? Or a method to bypass FRP without Odin or a custom recovery, or safestrap? I'm really stuck on why I can't force it using the three buttons during boot/reboot. Thanks in advance for your input.
Seems I found a way to semi brick my SM-T500. I was attempting to install the LOS 18.1 ROM just posted in the guide section. Some how I got the "can only install official" error message on my download screen after flashing TWRP. Made the mistake of flashing only the stock AP without BL or CSC and now I can't get into either recovery or download modes. Holding vol up and down and plugging in USB cable does nothing. Same with holding power button and either vol up or down. Blank screen. Can only power on and boot to system.
Did you install twrp and can you get into recovery. I had similar problem but was still able to get into download mode from power off. However to do so I had to boot into twrp and select reboot and power off... from that menu you can also boot directly to download mode... I know that doesnt halp much if you hadnt installed twrp yet... but thought I would throw that out there...
wizzdome said:
Did you install twrp and can you get into recovery. I had similar problem but was still able to get into download mode from power off. However to do so I had to boot into twrp and select reboot and power off... from that menu you can also boot directly to download mode... I know that doesnt halp much if you hadnt installed twrp yet... but thought I would throw that out there...
Click to expand...
Click to collapse
I can't boot TWRP or download. The only thing that will boot is system. Can't even get to the lock/unlock screen.
can you connect to adb shell? and try #reboot download
or #reboot twrp. I figure if you get to download you can reflash stock and start over.
Also when your trying to boot into recovery try not being plugged in. Not sure about this device but a lot of older Samsung's that I had would not let me get into recovery if I was plugged in during boot.
Locked oem mode
Locked download mode
Locked wipe factory
Locked update from sd card
Recycling item...
Need factory reset
I saw alot of issues with twrp so I tried Magick for first time ever on my SM-T500 and had a minor hiccup bc I wasn't paying attention to firmware and installed an old AP with newer firmware but ended up just reflashing the whole tablet with the same firmware as the AP that is required for Root and presto it worked! AND HEY IM DEF A NEWBIE!
housemusix said:
Locked oem mode
Locked download mode
Locked wipe factory
Locked update from sd card
Recycling item...
Need factory reset
Click to expand...
Click to collapse
Yeah I've run into the same thing, I originally missed the step to run Magisk after I flashed the patched tar and rebooted into the System and it triggered the "Prenormal KG state" problems. Finally I managed to flash stock ROM back and got to exactly where you are now.
I was able to just flash the patched Magisk AP without CSC and BL, and now it will only go to stock recovery and was able to get TWRP to work once but couldn't factory reset or wipe cache due to (which I assume was) a ton of mounting failures when it loaded.
Anyone else have suggestions to get this thing stable so I can flash LOS? I can get to Download mode.
hello, I post this because it's seems the same subject. I have to password protected (forget password) original rom tablet (non root). For me the datas are not important , I just want to remove the password or reflash with original rom. I downloaded Odin , usb driver and correct firmware. I select AP firmware with Odin, I see the connexion (COM3 green) and it's stuck to "setup connexion".
My problem is that it's impossible to enter in download mode.
When I try to shutdown the tablet, it ask me for a password.
When I press for seconds the power button , after few second I see the Samsung Logo and the tablet restarts.
I try to press volume up, volume up and volume down etc...but each combinaison...no recover, no download mode, nothing and impossible to flash . is it normal ? how to do to unsticked SetupConnetion ?
regards
bruno
housemusix said:
Locked oem mode
Locked download mode
Locked wipe factory
Locked update from sd card
Recycling item...
Need factory reset
Click to expand...
Click to collapse
This is not the same as my problem. My problem is that I flashed AP without BL and the two don't match. It isn't that things are locked but that I can't boot to anything but system. Can't boot recovery or download so I can't flash ANYTHING. Not even stock.