This is for people who have received their phone with a pre-installed Vendor ROM (MIUI Global Stable 8.0.8.0) and wants to switch to the Unofficial EU ROM. In my opinion, the EU ROM is currently the best ROM without any Chinese bloatware or popups until Xiaomi decides to release an actual Global ROM.
For those who are already on a China Stable ROM, there is already an excellent guide to install TWRP, ROOT, compiled by @underlines. This is only intended for switching from a Vendor ROM as I wasn't able to switch from a Vendor ROM to an official build using the previous guide. You need to be on an official build to be able to use TWRP and flash the EU ROM.
EDIT : The reason why I have mentioned to flash an official build at first is because, TWRP can be unresponsive with some Vendor ROMS. You'll be able to boot TWRP but touch would be frozen. I've tried with both versions of TWRP and it wouldn't work with the Vendor ROM installed on my device. TWRP over the Vendor ROM may work for some users.. For some builds like the one which came installed on my phone, it may not work. If TWRP works for you without being on an official build, you can skip the part where you have to flash an official ROM.
1. You need to have an unlocked bootloader. Please follow instructions on the other guide on how to do this.
2. You need the older version of MiFlash found on this link. Thanks to @Thorin78 for this link.
3. Download and extract fastboot Stable or Dev ROM and extract ROM folder to the C:\ Drive. This is because MiFlash may show a "cannot find file" error if you have a lot of subfolders. To avoid this, its best if the folder is C:\ROM Folder.
4.In the older version of MiFlash, click advanced and change the fastboot script location to the flash_all.bat in your unzipped rom folder.
5.Connect your phone in fastboot mode, click "Refresh" in MiFlash. Once your phone is detected, click "Flash" and it should now successfully flash the official ROM of your choice.
If you wish to be on a Xiaomi Official Stable or Dev ROM, Stop here! If you wish to continue installing the EU ROM proceed with the steps below.
6. Now that you have successfully flashed Official Stable or Dev ROM, use Minimal ADB and flash TWRP RC2 using the instructions in the other guide.
7. Once you are in TWRP, Swipe right to allow System Modifications and copy the forced encryption disabler using MTP. Flash this file to ensure that there are no bootloops.
8. After this step, go to WIPE, Format Storage, type "yes" and then Reboot Recovery. Copy SuperSU and EU ROM to storage and flash. Phone may take a few minutes to boot up and you will successfully boot the EU ROM.
For everything else, please follow the guide posted by underlines.
TWRP EU RC2 works with the China Dev ROM as well. Once you Swipe to Right to allow modifications, don't forget to flash the latest dm-verity and forced encryption disabler script from here. This is to prevent the device going into a bootloop.
These are the steps I followed and I am on EU ROM. Hope this helps people who wish to switch to the EU ROM from the Vendor ROM.
The link to miflash takes you DL minimal adb?
jazz452 said:
The link to miflash takes you DL minimal adb?
Click to expand...
Click to collapse
Corrected. Thanks for letting me know! Cheers!
satishp said:
Corrected. Thanks for letting me know! Cheers!
Click to expand...
Click to collapse
I managed to flash with latest miflash using your guide my bootloader was already unlocked check using:
boot your phone into fastboot and COMMAND PROMPT " fastboot oem device-info "
most are probably unlocked with vendor rom but not all.
Don't try to unlock with this method just check to save sometime.
guide: http://xiaomitips.com/guide/how-to-check-if-redmi-note-3-bootloader-is-locked-or-unlocked/
jazz452 said:
I managed to flash with latest miflash using your guide my bootloader was already unlocked check using:
boot your phone into fastboot and COMMAND PROMPT " fastboot oem device-info "
most are probably unlocked with vendor rom but not all.
Don't try to unlock with this method just check to save sometime.
guide: http://xiaomitips.com/guide/how-to-check-if-redmi-note-3-bootloader-is-locked-or-unlocked/
Click to expand...
Click to collapse
I guess it also depends on the Vendor ROM and customization which comes installed on your device. Not all Vendor ROMs for this device are the same. I tried everything under the sun with the latest miflash. It would detect device and even give a "success" output but the ROM was never actually flashed. The phone would still be on the Vendor ROM. Its as if some Vendor ROMs have some form of write protection baked in.
I could only get it working with the older miflash.
I'm not saying it was easy, the hard thing was making the unpack ING of the file. Sort of did it twice never had that problem before.
Why is it required to flash the official rom before flashing the EU rom?
nkatz565 said:
Why is it required to flash the official rom before flashing the EU rom?
Click to expand...
Click to collapse
This for people who don't want TWRP, root and dm-verify, just genuine Xiaomi rom with OTA updates and remove vendor rom.
QQ.
I did the following on my Mix and wondering if I am missing anything. I should say that everything "appears" to be working perfectly on the EU rom.
My Mix came with 8.0.8.0 Global (Vendor ROM) and I wanted to move onto the Xiaomi.eu rom. I loosely followed the above guide and did the following steps:
Applied for Unlock
Unlocked the device via MiUnlock
Used Minimal ADB and booted the device into FastBoot
Confirmed device was Bootloader unlocked
Flashed TWRP (latest non-eu build)
Booted to recovery
DID NOT swipe to edit system partition, left that read only
Flashed the latest Weekly Xiaomi.eu build
Wiped Dalvik/Cache
Booted phone
Performed a Factory reset.
All seemed a little too easy and I didnt need to go to an "Official" china ROM first. But I do have a few questions...
Should I have swiped Yes to enter Read/Write mode for the system partition and run a dm-verify? (I am not interested in Rooting the device at this stage)
Should I have performed a System clear in TWRP before installing Xiaomi.eu ontop of the Vendor ROM?
geubes said:
QQ.
I did the following on my Mix and wondering if I am missing anything. I should say that everything "appears" to be working perfectly on the EU rom.
My Mix came with 8.0.8.0 Global (Vendor ROM) and I wanted to move onto the Xiaomi.eu rom. I loosely followed the above guide and did the following steps:
Applied for Unlock
Unlocked the device via MiUnlock
Used Minimal ADB and booted the device into FastBoot
Confirmed device was Bootloader unlocked
Flashed TWRP (latest non-eu build)
Booted to recovery
DID NOT swipe to edit system partition, left that read only
Flashed the latest Weekly Xiaomi.eu build
Wiped Dalvik/Cache
Booted phone
Performed a Factory reset.
All seemed a little too easy and I didnt need to go to an "Official" china ROM first. But I do have a few questions...
Should I have swiped Yes to enter Read/Write mode for the system partition and run a dm-verify? (I am not interested in Rooting the device at this stage)
Should I have performed a System clear in TWRP before installing Xiaomi.eu ontop of the Vendor ROM?
Click to expand...
Click to collapse
Wouldn't worry about it the vendor ROMs aren't poison, not sure about dm-verify if you kept read only. I would of swiped then flashed dm-verify but didn't mean I know what I'm doing.
nkatz565 said:
Why is it required to flash the official rom before flashing the EU rom?
Click to expand...
Click to collapse
This is because some Vendor ROMS have some compatibility issues with TWRP. Touch screen wouldn't work on TWRP. I tried both TWRP versions and couldn't get touch to work.
Finally, I flashed the China Dev ROM and then used TWRP RC2 and touch functionality worked.
As some users below have pointed out that they could get to EU without flashing the one of the official builds, I guess it depends on the amount or type of vendor customizations applied on your device.
Which version do you own? I was wondering if this would work with the 6GB as well.
dbesada said:
Which version do you own? I was wondering if this would work with the 6GB as well.
Click to expand...
Click to collapse
This works with both versions. The ROM is compatible with both variants as the size of memory and storage doesn't affect compatibility.
I have the 6\256 variant.
satishp said:
This works with both versions. The ROM is compatible with both variants as the size of memory and storage doesn't affect compatibility.
I have the 6\256 variant.
Click to expand...
Click to collapse
Thank you. It worked. I fastboot twrp then factory reset the device and flashed the eu rom. All good. My bootloader was unlocked by the vendor.
Can someone please give me some advice? Just got the phone a couple hours ago. I took a picture of the info page. Based on the screenshot am I on the vendor ROM or official? I'm thinking I'm on Vendor because it has GAPPS already included.
If I'm on Vendor ROM and want to get to rooted EU Rom I can follow directions in the OP right?
How do I know is if my bootloader is already unlocked? Many thanks
SantinoInc said:
Can someone please give me some advice? Just got the phone a couple hours ago. I took a picture of the info page. Based on the screenshot am I on the vendor ROM or official? I'm thinking I'm on Vendor because it has GAPPS already included.
If I'm on Vendor ROM and want to get to rooted EU Rom I can follow directions in the OP right?
How do I know is if my bootloader is already unlocked? Many thanks
Click to expand...
Click to collapse
Vendor (there is no Global ROM for Mix). You should unlock your bootloader (check if it's already unlocked using "fastboot oem device-info"), flash TWRP, wipe and flash EU
Razorbacktrack5535 said:
Vendor (there is no Global ROM for Mix). You should unlock your bootloader (check if it's already unlocked using "fastboot oem device-info"), flash TWRP, wipe and flash EU
Click to expand...
Click to collapse
Do I have to do Power + Vol Down (that's bootloader mode right) in order to input the ADB code you gave me?
SantinoInc said:
Do I have to do Power + Vol Down (that's bootloader mode right) in order to input the ADB code you gave me?
Click to expand...
Click to collapse
Yes, you have to use Fastboot Mode
Razorbacktrack5535 said:
Yes, you have to use Fastboot Mode
Click to expand...
Click to collapse
I'm not unlocked right? Hope they approve my unlock request soon
SantinoInc said:
I'm not unlocked right? Hope they approve my unlock request soon
Click to expand...
Click to collapse
Yes, you have to wait
Related
UPDATE: This is now unneeded because threr is a faster way ro unlock bootloader on official MM here, he updated for official MM
Hi, I discovered an unlock method for official MM!! This maybe long but's it totally safe
You need:
Adb and fastboot environment ready PC
LP RAW File
Android 6.0 Beta Unlock tool
Android 5.0 One-Click Unlock tool
First version of beta MM (Z00A) (Z008)
Official MM zip (find it on Asus site)
Thanks to all people upload these links
Just do the following:
Flash the lastest LP via AFT (using raw file given above), wipe all data. If you already on MM, you have to downgrade
Unlock your bootloader using 1 click tool given above
Boot to stock recovery and sideload the first version of beta MM
Unlock the bootloader using MM beta unlock tool above
Boot to stock recovery
Two case here:
Case 1: You can't boot stock recovery
Normally boot your phone (to Android)
Setup it as a new phone
If it shows there is a new firmware, don't update!!!
Enable Developer options, then enable usb debugging
Copy the official MM zip to external sd card
Open command prompt, run adb reboot recovery, accept the adb permission if prompted
After it boots to recovery, select Apply update from SD, then choose the zip file you've copied before
Wait for it to update, it may stuck at flashing splashcreen, don't worry, it's trolling you, may be Asus forgot to update the script
Goto step 7
Case 2: You can boot stock recovery
Sideload the official MM zip (adb sideload <filename>.zip)
Goto step 7
7. Flash this TWRP (fastboot flash recovery <twrp>.img)
8. Root your phone using this method
9. Reboot, if it shows "Your phone has failed verification bla bla..", then you've success. It may reset loop like note 7 in the first time start, don't worry.
9. Enjoy :highfive:
Note: If you're facing with battery problems on MM, factory reset it in Settings > Backup and Reset > Factory Reset > Erase everything
Successfully on my ZE550ML
The warning screen is normal so don't worry and there is no way to fix it for now
Reverse
Reverse #2
Please answer this I have a unlocked Bootloader + twrp Intalled + root, now I am really confused that after upgrading to MM will my Bootloader get automatically lock or what
Sent from my ASUS_Z00A using XDA-Developers mobile app
NiTesh said:
Please answer this I have a unlocked Bootloader + twrp Intalled + root, now I am really confused that after upgrading to MM will my Bootloader get automatically lock or what
Sent from my ASUS_Z00A using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, BL will be relocked once you upgrade to MM.
If you want to unlock MM BL(6.0), refer to this thread.
Or you can downgrade to Lollipop referring to this thread. Then your BL(5.0) is unlocked.
Upgrade to MM
Hello folks!
2 week before MM was released i'ved opted to unlock my ZE551ML BL and therefore install twrp and a MM custom ROM..
so here´s the thing i stayed with the ROM for about 3 weeks and honestly..it works very well..but when i knew that 6.0 official was coming out i decided to go back to stock..i did it following manny tuturials avaliable for me to get my BL Re-Locked..but unsuccessfully..so i followed mr_gourav2000 tuturial (http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526) and reverted to the WW_Z00A-2.20.40.183-to-2.20.40.184 (hopefully i can get the sshot in this post) version...since my BL is unlocked i can´t get no updates..my question is:
Is there anyway to go to MM 6.0 by ASUS with the current status of my phone?
is there anything i can do to revert this??
Cheers to everyone
https://www.dropbox.com/sc/xue7iuqfyvgdvo3/AAATR4mYtcHzM1IhfKbx2a1oa
R3D SoX F4N said:
Hello folks!
2 week before MM was released i'ved opted to unlock my ZE551ML BL and therefore install twrp and a MM custom ROM..
so here´s the thing i stayed with the ROM for about 3 weeks and honestly..it works very well..but when i knew that 6.0 official was coming out i decided to go back to stock..i did it following manny tuturials avaliable for me to get my BL Re-Locked..but unsuccessfully..so i followed mr_gourav2000 tuturial (http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526) and reverted to the WW_Z00A-2.20.40.183-to-2.20.40.184 (hopefully i can get the sshot in this post) version...since my BL is unlocked i can´t get no updates..my question is:
Is there anyway to go to MM 6.0 by ASUS with the current status of my phone?
is there anything i can do to revert this??
Cheers to everyone
https://www.dropbox.com/sc/xue7iuqfyvgdvo3/AAATR4mYtcHzM1IhfKbx2a1oa
Click to expand...
Click to collapse
Just download the update package and rename it to mofd_sdupdate.zip, copy it to internal storage. Then reboot to stock recovery, the update will automatically start. This should work if you have lastest stock recovery
can anyone please upload official recovery for Zenfone 2 ZE551ML, currenty i have twrp installed on Android version 5.0 LP Stock
HungNgocPhat said:
Just download the update package and rename it to mofd_sdupdate.zip, copy it to internal storage. Then reboot to stock recovery, the update will automatically start. This should work if you have lastest stock recovery
Click to expand...
Click to collapse
i have twrp recovery at the moment cause i followed mr_gouvad2000 tuturial..
what do you sugest?
flash WW_ZE551ML_2.20.40.196_20160815.raw?
WW_ZE551ML_2.20.40.194_20160713.raw?
and then go and do what you told?
cheers
hello, i cant find first mm beta for ml551...can you help me? thank you and sorry for my english
tridet18 said:
hello, i cant find first mm beta for ml551...can you help me? thank you and sorry for my english
Click to expand...
Click to collapse
someone correct me if i am worng but....
https://www.asus.com/Phone/ZenFone_2_ZE551ML/HelpDesk_Download/
Look for this version WW-4.21.40.134
Hello, thank you but this version is official, i need de first beta 6.0
R3D SoX F4N said:
someone correct me if i am worng but....
Look for this version WW-4.21.40.134
Click to expand...
Click to collapse
that version...i can´t find it anywere..maybe someone here knows were to find it?
Updated the first MM beta link in OP
hello , thanks to your tutorial I managed to unlock the bootloader , I have TWRP version 3.0.0.2 with stock installed but when I wanted to install CM13 and gapps I restarted the phone and automatically returns to recovery again. some help?
tridet18 said:
hello , thanks to your tutorial I managed to unlock the bootloader , I have TWRP version 3.0.0.2 with stock installed but when I wanted to install CM13 and gapps I restarted the phone and automatically returns to recovery again. some help?
Click to expand...
Click to collapse
Have you downloaded the correct build? There are build for MM bootloader, if you flash the normal builds, it will fail and reboot to recovery again. Gapps is the same for all builds
After you install that special build, do not update to newer nightlies, it will fail. For updates, check the link i give you and see if there is a new MMBL build.
About that, here is the post: http://forum.xda-developers.com/showpost.php?p=68542370&postcount=8551
hello friend, I tried to install the CM13 ROM that indicated me and I get Error 7 in TWRP 3.0.2.0, I have Android 6.0 (.134) official and if I can change kernel and flash rom SuperSU but change with a new MM Blows I can not (CM13, AICP, beanstalk ....) thanks for your help!
tridet18 said:
hello friend, I tried to install the CM13 ROM that indicated me and I get Error 7 in TWRP 3.0.2.0, I have Android 6.0 (.134) official and if I can change kernel and flash rom SuperSU but change with a new MM Blows I can not (CM13, AICP, beanstalk ....) thanks for your help!
Click to expand...
Click to collapse
Run the script again (i gave you in above post). Download the CM13 in that link, not in the OP of CM13 thread. Flash that CM13 and Gapps (Gapps is universal for MMBL and LPBL).
May be you have corrupt download, I'm currently running CM13 on MMBL
Hello, I have finally found the solution, the problem is the recovery, the TWRP 3.0.0.2 da failure with new builds, I Flashed next on the link you put me through adb and now it works, thank you very much for everything .
hlp
tridet18 said:
Hello, I have finally found the solution, the problem is the recovery, the TWRP 3.0.0.2 da failure with new builds, I Flashed next on the link you put me through adb and now it works, thank you very much for everything .
Click to expand...
Click to collapse
how u unlocked bootloader
Okay guys first let me tell you why I have created a new thread just for updating the BL and Firmware ,
I know we already have methods of updating like:
1. flashing the full OOS3 zip through stock recovery ,this method is quite simple for the ones who are on stock recovery and just want to update their OOS version.If you fall in this category then you have no purpose here,you may leave.
2. Is method provided by our fav helping hand @Joshwin Aranha ,that method is sure for the rest of us who dont fall in the above category,but is way too long,although simple and effective still "long".
I created this thread to help the CM13(Official or Sultan's)//any custom rom using new BL,users who want to update their BL without flashing the OOS through the tedious way just to update BL and users who are stuck on bootlogo due to old BL with roms using new BL.
Here I will guide you through the required steps to update our bootloader "In easiest and fastest way without wiping and restoring anything".
So what are we waiting for ,lets start .
Prerequisites
you will need two files for this process,nothing else.
1 . First one is BLUpdater zip --->Here.
2. Second is TWRP compiled from latest sources use either This or the one from Here<--use v41 or use Sultan's from Here OR if you are Martin's fan like me and want to use his MutiRom TWRP goHere.
PS:I am assuming you have Unlocked Bootloader and have either
official/blu_spark/sultan's/ Multirom TWRP installed,in a working condition on OOS2.x BL(if not what are you doing here).
Note: make sure oem unlocking is checked in developer options in your current rom,else updating the BL may cause it to get locked ,and you will have to unlock it again and flash the recovery manually through fastboot itself.
Now the steps
1.First copy both of the above files in your sdcard or otg or ext-sdcard,any place accessible in recovery.
2. Now boot into recovery Choose Install and choose the "OPXBLUpdateOOS3.1" zip and flash it.
3. Don't reboot now ,go to Install again ,this time use "Install Image" button in lower right corner,navigate to folder where you copied the new TWRP,you should be able to see the file,select it ,choose recovery in the next menu and flash.
NOTE:If you chose to use Sultan's recovery.zip then just flash it normally.
4. Don't reboot come back to TWRP home ,goto reboot and recovery ,if TWRP says no OS installed ignore it.
Now voila you should have updated your firmware/BL.Congrats.
You can now install any rom that supports the new BL.Older roms won't boot on the new MM BL.So check the rom thread before installing the rom and later on quacking here about your device being stuck at bootlogo.
Notes
i)Neither I nor XDA will be responsible if your OPX bricks or explodes or ditches you and flies to space.
ii)We are not touching system partition so last installed ROM will be intact.
iii)This guide will leave you into bootable rom only if you have a rom installed that works on latest firmware.
iv)This can also be used to restore all your OPX partitions back to OOS3.x partition state,if you messed any.
v)In case you are using latest nightly (cm13) and face bootloop - go Here
psst:If you are not diggin the new BL,and wanna downgrade again ,back to old BL,check this post.
PS: (second one,I know) This guide was made by taking inspiration from Joshwin's post and devtry method.
Also click Thanks if I helped you
matwaking said:
Okay guys first let me tell you why I have created a new thread just for updating the BL and Firmware ,
I know we already have methods of updating like:
1. flashing the full OOS3 zip through stock recovery ,this method is quite simple for the ons who are on stock recovery and just want to their OOS version.If you fall in this category then you have no purpose here,you may leave.
2. Is method provided by our fav helping hand @Joshwin Aranha ,that method is sure for the rest of us who dont fall in the above category,but is way too long,although simple and effective still "long".
So I created this thread just to shorten the process provided by Joshwin.I also created this thread to help the official CM13 users who have problem with latest nightlies due to new bootloader or are stuck in bootlogo.
...
PS: (second one,I know) This guide was made by taking inspiration from Joshwin's post and devtry method.
Also click Thanks if I helped you
Click to expand...
Click to collapse
Booomshkalaka!!!
Great guide, can't test (already have new bootloader and too lazy to switch back but look very good.
Thx to all
Kurt
Kurt Krummbein said:
Booomshkalaka!!!
Click to expand...
Click to collapse
Lol .
Thanks mate.
Will this work if I'm in bluspark twrp but the previous version..? Or do I have to change to official twrp?
jonrodz said:
Will this work if I'm in bluspark twrp but the previous version..? Or do I have to change to official twrp?
Click to expand...
Click to collapse
Will work with any twrp,no requirement of official one.
Thanks, bro. One more doubt. I'm currently on DU rom with custom kernel... Do you think rom will boot after this..?
jonrodz said:
Thanks, bro. One more doubt. I'm currently on DU rom with custom kernel... Do you think rom will boot after this..?
Click to expand...
Click to collapse
No it wont,right now almost all the custom roms need to update to support new firmware.Only latest cm13 nightlies are booting now,also aosp compiled by olddroid for new BL(shh its only for testers right now)
also maybe the MIUI8 port ,just posted in the forums.
I'm a litte bit confused.
Currently I'm on nighty October 1st. (cm-13.0-20161001-NIGHTLY-onyx.zip)
Can i update the Bootloader with your method and after that booting up my current nightly version?
Or do I have to update after the bootloader update to nightly version 12 (the currently latest)?
jerikooo said:
I'm a litte bit confused.
Currently I'm on nighty October 1st. (cm-13.0-20161001-NIGHTLY-onyx.zip)
Can i update the Bootloader with your method and after that booting up my current nightly version?
Or do I have to update after the bootloader update to nightly version 12 (the currently latest)?
Click to expand...
Click to collapse
no update the BL using the steps above ,then flash the latest nightly.That way it would be good.
Or you can flash nightly first then update BL.Choice is yours.I recommend updating the BL first.
I followed your guide with a locked bootloader, and now I'm in bootloops . Just suggest you put a big red "make sure your bootloader is unlocked" in the steps, not in the footnote.
Duplicate post.Deleted
ccaappton said:
I followed your guide with a locked bootloader, and now I'm in bootloops . Just suggest you put a big red "make sure your bootloader is unlocked" in the steps, not in the footnote.
Click to expand...
Click to collapse
Reboot into fastboot mode and
Code:
fastboot oem unlock
And using a custom recovery and custom rom makes me assume one have unlocked bootloader
matwaking said:
Reboot into fastboot mode and
Code:
fastboot oem unlock
And using a custom recovery and custom rom makes me assume one have unlocked bootloader
Click to expand...
Click to collapse
Thanks! I actually relocked my bootloader not long after installed cm13, and disabled "unlock oem" in "developer settings"(I don't know why I did this). So both system and rec is inaccessible, and fastboot is useless in this case. Fortunately I followed the unbrick guide: http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 and get the old bootloader back. Now I could enter CM13-09-28 with all my data intact.
Just hope to let people know the hard lesson I learned, and how to deal the bootloops.
And guys, NEVER RELOCK BOOTLOADER AGAIN!
ccaappton said:
Thanks! I actually relocked my bootloader not long after installed cm13, and disabled "unlock oem" in "developer settings"(I don't know why I did this). So both system and rec is inaccessible, and fastboot is useless in this case. Fortunately I followed the unbrick guide: http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 and get the old bootloader back. Now I could enter CM13-09-28 with all my data intact.
Just hope to let people know the hard lesson I learned, and how to deal the bootloops.
And guys, NEVER RELOCK BOOTLOADER AGAIN!
Click to expand...
Click to collapse
Well no fix without any problems hehehe,.Haapy 4 u.
Click that button if you think my posts are useful
Is this enough to install CM14 or do i have to install the whole room and them flash CM14?
Manelit said:
Is this enough to install CM14 or do i have to install the whole room and them flash CM14?
Click to expand...
Click to collapse
taking you wanna flash ashwins cm14 right. You just wanna follow the instructions in first post and then flash the cm14.No need to install the whole Oos zip.
This way you should have updated BL and working cm14.
Just flash the cm14 after booting into new TWRP
I've just followed the procedure from OP and all went smooth as butter. Thanks
Directly after that (without reboot) I've installed the latest CM13 (with GApps) and Arsenic R24. Working as a charm
slaav said:
I've just followed the procedure from OP and all went smooth as butter. Thanks
Directly after that (without reboot) I've installed the latest CM13 (with GApps) and Arsenic R24. Working as a charm
Click to expand...
Click to collapse
Press that sweet sweet button mate
1.First copy both of the above files in your sdcard or otg or ext-sdcard,any place accessible in recovery.
2. Now boot into recovery Choose Install and choose the "OPXBLUpdateOOS3.1" zip and flash it.
3. Don't reboot now ,go to Install again ,this time use "Install Image" button in lower right corner,navigate to folder where you copied the new TWRP,you should be able to see the file,select it ,choose recovery in the next menu and flash.
4. Don't reboot come back to TWRP home ,goto reboot and recovery ,if TWRP says no OS installed ignore it.
Click to expand...
Click to collapse
Hi, everyone
I'm accidentally reboot device after second step. Now device freezing on "+1 powered by android". Can I remove this zip, or... what can I do next?)
walsash said:
Hi, everyone
I'm accidentally reboot device after second step. Now device freezing on "+1 powered by android". Can I remove this zip, or... what can I do next?)
Click to expand...
Click to collapse
u can flash bluespark twrp via fasboot
Sent from my ONE E1003 using XDA-Developers mobile app
A brief Intro.
Starting from the 7.1.2 ROMs most of the developers decided to follow the process of checking modem version at the time of flashing the rom. Many peoples ended up in
"Error 7- assert(xiaomi.verify_modem("MSM8976.LA.1.0.c3-30041-STD.PROD-1.77504.1.83742.1") == "1")"
The main reason for this is the outdated firmware or it is happened to those who had unofficially unlocked the bootloader.
Some more info..
1. You must be on MM build bootloader. If you are unofficially unlocked bootloader it will give you ERROR7.
@TheStrix have alreday given a short information about it in his Official LineageOS thread. If you are unaware of it read it here
2.Outdated Firmware.
Your firmware must be from from MIUI Global DEV v7.5.4 or above.
Get MIUI Global DEV v7.5.4 from here
or the latest firmware from here
NB:-
- Iam using the MIUI Global DEV v7.5.4 firmware. All working fine including Volte. I dont know about the second one,you can give it a try.
-If you are unofficially unlocked ,MIUI Global DEV v7.5.4 will re lock your bootloader you will end up in bootloop.
- I will not be reponsible for any damages.
Solution 1 [Permanent Solution] ..
1. So if you are unofficially unlocked, i will suggest to clean flash the latest MIUI Fatboot Rom. Kenzo users get it from here.
2.Flash it using MIFlashTool ,and officially unlock it.
HOW TO UNLOCK THE BOOTLOADER OF REDMI NOTE 3?
PART 1 : REQUESTING FOR UNLOCK PERMISSION
Step 1 – Open up your favorite web browser in your computer (Chrome is recommended) then go to this link
Step 2 – You’ll see the official page of “Unlock Your Mi Device”. Now simply click on the blue “Unlock Now” Button in the middle of the page.
Step 3 – You’ll see a login page in the next page which is in Chinese. If you use Google Chrome to open the page, then you can simply use its built-in Google Translate feature.
Step 4 – Once logged in, you’ll see the Unlock Application Permissions page.Now simply fill in all required fields then click on that green Apply Immediately button.
Step 5 – In the next page, you’ll need to enter a verification code sent to you via SMS. Check your phone for any SMS verification sent by Xiaomi server. The code is usually valid for only 5 minutes so you need to enter it immediately.
Step 6– Once you have submitted the 6 digits code, you’ll then be redirected to another page saying that from the point toward all you need to do is just waiting for Xiaomi Developers to review and approve your application. Once approved, you’ll get another SMS which normally arrives in 15 min(Atleast for me. For some it may take time). The approval process is manual so just be patient on this.
PART 2 : BOOTLOADER UNLOCKING PROCESS
Requirements for Bootloader Unlocking :
-An active Mi account linked to your device, your phone number and it has permission to proceed with bootloader unlock (follow previous steps above)
-Please backup your data for just in case scenario.
-Again, if you are not fully aware of flashing custom ROM, then you better stay away of unlocking your phone’s bootloader.
Download Mi Flash Unlock tool for Windows here, and install it on your computer / PC.
Step 1 – On your device, please login to your Mi account.
Step 2 – Put / reboot your device into bootloader mode. To do that, simply turn off your device, press the Power button and Volume down ( – ) button at the same time.
Step 3 – On your computer, open MiFlash Unlock tool you’ve just installed. Click on the Agree button when asked.
Step 4 – Login to MiFlash Unlock tool with the same Mi Account.
Step 5 – Now connect your phone to computer using its USB cable.
Step 6 – Once your phone is connected, the Unlock button will become active. Next, simply click on the Unlock button to start the process. The unlock process will take about 10 – 15 seconds to complete. That’s all.
After unlocking your phone’s bootloader, you’ll be able to flash TWRP and other custom ROM. Enjoy..
Please take these as your concern upon unlocking bootloader :
One Mi account could only unlock one device within 30 days.
If you see a notice saying that “current user is not logged in connected device” then please reboot your device normally then login with your account in the device (see Step 1).
Unlocking bootloader will wipe all user data especially if your device is encrypted. That’s why you’ll need to create backup before going to proceed.
Neither Xiaomi or I will guaranteed if anything goes wrong during and as the result of unlocking. Proceed with your own risks.
Also, unlocked Xiaomi devices will be marked in the official service end.
PART 3 : Installing TWRP and Custom Rom.
Step 1 –. Get latest TWRP from here. Flash it via fastboot { I will not be explaining that in details}
Step 2 –. Take back up of EFS using Twrp. Wipe Everything including internal storage.
Step 3 –. Install Firmware-Rom-Gapps in order. Error 7 will be solved
Solution 2[Temporary Solution] ..
Only try this method if you are not able to officially unlock your device . Dont use the Firmware by Strix.It will relock your bootloader.
Step1 - Downalod the rom to your pc.
Step2 - Use any notepad. Suggestd one Notepad++. Get it from here
Step3 - Open the Rom.zip{dont extarct}. Navigate to META-INF/com/google/android/updater-script.
Double click on updater-script and open it with notepad++. Edit and remove this line from the file
Code:
assert(xiaomi.verify_modem("MSM8976.LA.1.0.c3-30041-STD.PROD-1.77504.1.83742.1") == "1")
Allow the file to save and close the zip.{Rom will recompress by itself}.
Step4 - Flash in order. Firmware -Rom-Gapps.
Some FAQ's ..
1. Iam not getting volte
Ans:- Restore the EFS. Try rebooting your phone 2 or 3 times. After Clean flash ,I had to reboot 3 times to get volte working. :fingers-crossed:
2.Iam not able to see FingerPrint Option?
Ans:- Your are defenitely on an old Firmware.Update to Latest Firmware It will work.
3.Iam getting Some other Errors. :crying:
Ans:- Post your Screen Shot Below.Will Check.
4.Iam getting some other problems in ROM.
Ans:- Report it with proper logs to the developer.Iam helpless.
5.I bricked my device
Ans:- I will Laugh at you. Always do everything at your own risk. :silly:
Some Advices ..
* At least use search once in your life time. From my observation its clear that no one ever uses search in the Rom Section. Even is there is a solution in every page you keep on asking same questions.
*Dont flood the thread.
*Dont qoute the whole op.
*Respect other members
If this was of help to anyone hit the like :fingers-crossed:
First
There's a problem with not updating the bootloader (aboot) and staying with a LP bootloader, you will most likely encounter bootloops. Say you edit that code line for the modem check, it will flash but it won't boot/work properly. You must update the bootloader in order to boot newer ROMs. And you need to update the modem and other stuff so you won't face issues. You need to offcially unlock no matter what you do, it's very easy.
Asphyxiate666 said:
There's a problem with not updating the bootloader (aboot) and stay with a LP bootloader, you will most likely encounter bootloops. Say you edit that code line for the modem check, it will flash but it won't boot. You must update the bootloader in order to boot newer ROMs. And you need to update the modem and other stuff so you won't face issues. You need to offcially unlock no matter what you do, it's very easy.
Click to expand...
Click to collapse
that's why I wrote temporary method..only for those who are lazy and not willing to start from root by flashing fastboot rom
adithyan25 said:
that's why I wrote temporary method..only for those who are lazy and not willing to start from root by flashing fastboot rom
Click to expand...
Click to collapse
I understand but with their laziness they will ruin their devices then come here and say "omg sir it doesn't boot wtf is this useless rom crap developers".
Asphyxiate666 said:
I understand but with their laziness they will ruin their devices then come here and say "omg sir it doesn't boot wtf is this useless rom crap developers".
Click to expand...
Click to collapse
I know that...most people don't even bother to use search..even if there is a solution just above their question they won't give a damn to look it..
guys help..i had officially unlocked the bootloader..and i don't remember the firmware i had installed...n i am still getting the error code 7..do i need to flash the kenzo global or dev firmware from the link..??
PrathaM X said:
guys help..i had officially unlocked the bootloader..and i don't remember the firmware i had installed...n i am still getting the error code 7..do i need to flash the kenzo global or dev firmware from the link..??
Click to expand...
Click to collapse
you must format your phone (not wipe) using twrp then install fw-rom-gapps...use fw by strix from above method(permanent)
I flashed v8.5.1.0 using MiFlash and it said flash completed successfully. However now it is stuck on the Mi splash screen with "powered by android" logo at the bottom. The dots are moving so I assume it is loading but it's been on that same screen for the past 10 minutes now.
Previously, the bootloader was officially unlocked but some stuff broke as I tried to upgrade to a new ROM and that's why I decided to flash v8.5.1.0 in order to go back to stock and start from scratch.
Edit: It works!
adithyan25 said:
you must format your phone (not wipe) using twrp then install fw-rom-gapps...use fw by strix from above method(permanent)
Click to expand...
Click to collapse
I'm on Marshmallow boot loader (flashed faatboot ROM) and officially unlocked & formated data.
Yesterday I did a update RR ROM (9th july) then I got error 7.
at the time of flashing I was on latest firmware 7.7.6.
So reflashed 7.5.4 firmware and it's worked.
So we should always stick to 7.5.4 firmware ? For avoiding error 7?
baku2313 said:
I'm on Marshmallow boot loader (flashed faatboot ROM) and officially unlocked & formated data.
Yesterday I did a update RR ROM (10th july) then I got error 7.
at the time of flashing I was on latest firmware 7.7.6.
So reflashed 7.5.4 firmware and it's worked.
So we should always stick to 7.5.4 firmware ? For avoiding error 7?
Click to expand...
Click to collapse
yep..in my knowledge the latest firmware has a change in modem version(updated version) so it wont match with one in updater script... so i will say to stick with some older firmware unless the developers chabge it in the roms update-script file...
iam using strix fw 7.6.15
adithyan25 said:
yep..in my knowledge the latest firmware has a change in modem version(updated version) so it wont match with one in updater script... so i will say to stick with some older firmware unless the developers chabge it in the roms update-script file...
iam using strix fw 7.6.15
Click to expand...
Click to collapse
Can you provide me the link please.
baku2313 said:
Can you provide me the link please.
Click to expand...
Click to collapse
its in the aosp extended 4.4 update op...
im quite busy now...i will share it later if you havent found it .... you will find the link in aosp extended thread
adithyan25 said:
its in the aosp extended 4.4 update op...
im quite busy now...i will share it later if you havent found it .... you will find the link in aosp extended thread
Click to expand...
Click to collapse
Strix updated his thread with 7.7.6 firmware (Kenzo).
I am on MM on Redmi note 3 Snapdragon version! I tried firmware (7.7.0 I guess) and then ROM Zip but still got the Problem ! Any thing else I can do?
What if i have locked bootloader and flashed twrp through miflash?
coolguy22 said:
What if i have locked bootloader and flashed twrp through miflash?
Click to expand...
Click to collapse
In theory it should work I guess? Assuming you used the guide from @khajiit here you should have a MarshMellow bootloader, as the MIUI version linked there is based on MM (kate_global_images_6.11.3_20161103.0000.00_6.0_global_16db0fc5fa), so it shouldn't relock. Can't try myself since I unlocked mine recently.
Amon_Re said:
In theory it should work I guess? Assuming you used the guide from @khajiithere you should have a MarshMellow bootloader, as the MIUI version linked there is based on MM (kate_global_images_6.11.3_20161103.0000.00_6.0_global_16db0fc5fa), so it shouldn't relock. Can't try myself since I unlocked mine recently.
Click to expand...
Click to collapse
Ok so if i get the latest firmware and install some 7.1.2 rom it shouldn't bootloop?
coolguy22 said:
Ok so if i get the latest firmware and install some 7.1.2 rom it shouldn't bootloop?
Click to expand...
Click to collapse
In theory, it should work.
..
I'm using Rn7 4gb 64gb PFGMIXM global version. I wonder if i will unlock bootloader and install TWRP or Orange it will allow me to downgrade version without bricking or any problem?
On global rom the ARB is activated, if you want to downgrade to older version you can use miui.eu instead because there is no ARB on miui.eu
Hi there, you can downgrade between MIUI 10.X without the need of use of TWRP/ORANGE, you just need the Bootloader unlocked and the MI Flash Tool with any Fastboot Miui ROM (But if you want to, you can still use the custom recoveries for Recovery ROMs) I Downgraded from 10.3.6.0 to 10.2.7.0 with fastboot rom and everything went smooth. (Be aware that after using MI Flash tool the Bootloader will be relock)
BlackGarnett said:
Hi there, you can downgrade between MIUI 10.X without the need of use of TWRP/ORANGE, you just need the Bootloader unlocked and the MI Flash Tool with any Fastboot Miui ROM (But if you want to, you can still use the custom recoveries for Recovery ROMs) I Downgraded from 10.3.6.0 to 10.2.7.0 with fastboot rom and everything went smooth. (Be aware that after using MI Flash tool the Bootloader will be relock)
Click to expand...
Click to collapse
Can you give instruction? After bootloader unlock? I read other comment from other thread it can brick the device. Do we have the same device? 48mp cam and PFGMIXM? Can you post here your screenshot of your current Rn7 version?
If i'm going to install TWRP is it safer than downgrade using MI flashtool?
gAracUh said:
Can you give instruction? After bootloader unlock? I read other comment from other thread it can brick the device. Do we have the same device? 48mp cam and PFGMIXM? Can you post here your screenshot of your current Rn7 version?
If i'm going to install TWRP is it safer than downgrade using MI flashtool?
Click to expand...
Click to collapse
Hi sure, I'm on 10.3.5.0 right now, found it as the better ROM for my personal using, and yes I have global version PFGMIXM, after testing what I needed to, between 10.3.6.0-10.2.7.0 I stayed up in 10.3.5.0. (I can't post any screenshot right now but maybe later I might attach to this post --- Update, attached the screenshot)
-About the brick, I actually can't explain what it triggers but most of the time I belive has been happening to others RN7 versions.
-About the TWRP safety, is the same I believe (as long as you know what you are doing), I prefered to try the downgrade my first time using MI flashtool cuz it's official and less possibilities of problems, you can always unlock again the bootloader after the flash doing the same steps and w/o waiting time cuz already did that phase.
-The instructions are simple and they are the same given by Xiaomi in their ROM site.
On here: Fastboot Method
Instructions via Fastboot method:
-Download and install the Adb+fastboot drivers or xiaomi drivers for rn7 (that I believe you already have if you unlocked the bootloader)
-Download and install the Mi FlashTool (The link above)
-Download the FASTBOOT ROM for you need, remember it to be PFGMIXM (On internet you can find the 10.2.7.0/10.2.8.0 and the 10.3.5.0 FASTBOOT ROM -- On Xiaomi site you can find the 10.3.6.0 lastest fastboot ROM)
-Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable.
-Double click on the downloaded ROM file to decompress it. Open the file folder for the decompressed ROM pack, and copy its path .
-Open the MI flashtool and you can either click "select" to search the folder of the uncrompressed ROM or just paste the path if you copied it early (example: C:\User\User1\Desktop\complete_folder_rom).
-Click Refresh and the device will be detected automatically.
-Then just click flash and wait the process that will take some minutes
-After the flash is done, the status will say "flash done" and will appear a "success" message, then the phone will reboot itself and start as it was out-of-the-box for the first config
Same instructions are with pictures in the link.
I didn't tried the downgrade in TWRP/Orange but I believe is the same as flashing any ROM, wipe dalvik, cache, data, system and then flash the ROM - for TWRP/Orange the ROM is the "Recovery" version ones, not the Fastboot as the steps above (TWRP will always mark you an error for MIUI Recovery ROMS so erase "compatibility.zip" in the ROM, this usually is not needed in Orange as I belive i've read it)
My recommendation is to use the Fastboot Method
Also PFGMIXM ver only have the ROM versions mentioned, 10.2.3.0 (10.2.3.0 PFGMIXM not the EEA one, it's rare to see and only come in stocks phones) it's a rare out-of-the-box-rom-version I saw, and the 10.2.1.0 was deleted from Xiaomi servers long time ago, so to downgrade you are only going to find the 10.2.7.0 ROM.
BlackGarnett said:
Hi sure, I'm on 10.3.5.0 right now, found it as the better ROM for my personal using, and yes I have global version PFGMIXM, after testing what I needed to, between 10.3.6.0-10.2.7.0 I stayed up in 10.3.5.0. (I can't post any screenshot right now but maybe later I might attach to this post --- Update, attached the screenshot)
-About the brick, I actually can't explain what it triggers but most of the time I belive has been happening to others RN7 versions.
-About the TWRP safety, is the same I believe (as long as you know what you are doing), I prefered to try the downgrade my first time using MI flashtool cuz it's official and less possibilities of problems, you can always unlock again the bootloader after the flash doing the same steps and w/o waiting time cuz already did that phase.
-The instructions are simple and they are the same given by Xiaomi in their ROM site.
On here: Fastboot Method
Instructions via Fastboot method:
-Download and install the Adb+fastboot drivers or xiaomi drivers for rn7 (that I believe you already have if you unlocked the bootloader)
-Download and install the Mi FlashTool (The link above)
-Download the FASTBOOT ROM for you need, remember it to be PFGMIXM (On internet you can find the 10.2.7.0/10.2.8.0 and the 10.3.5.0 FASTBOOT ROM -- On Xiaomi site you can find the 10.3.6.0 lastest fastboot ROM)
-Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable.
-Double click on the downloaded ROM file to decompress it. Open the file folder for the decompressed ROM pack, and copy its path .
-Open the MI flashtool and you can either click "select" to search the folder of the uncrompressed ROM or just paste the path if you copied it early (example: C:\User\User1\Desktop\complete_folder_rom).
-Click Refresh and the device will be detected automatically.
-Then just click flash and wait the process that will take some minutes
-After the flash is done, the status will say "flash done" and will appear a "success" message, then the phone will reboot itself and start as it was out-of-the-box for the first config
Same instructions are with pictures in the link.
I didn't tried the downgrade in TWRP/Orange but I believe is the same as flashing any ROM, wipe dalvik, cache, data, system and then flash the ROM - for TWRP/Orange the ROM is the "Recovery" version ones, not the Fastboot as the steps above (TWRP will always mark you an error for MIUI Recovery ROMS so erase "compatibility.zip" in the ROM, this usually is not needed in Orange as I belive i've read it)
My recommendation is to use the Fastboot Method
Also PFGMIXM ver only have the ROM versions mentioned, 10.3.4.0 (10.3.4.0 PFGMIXM not the EEA one, that's why it's rare to see and only come in stocks phones) it's a rare out-of-the-box-rom-version I saw, and the 10.2.1.0 was deleted from Xiaomi servers long time ago, so to downgrade you are only going to find the 10.2.7.0 ROM.
Click to expand...
Click to collapse
Thank you very much for detailed instructions the reason why i want to downgrade is the battery life. I noticed after two consecutive update within one month the battery backup is not good like before. I am pretty sure about that because it has been 1 month since i bought this.
Even the power saver is always activated I'm not satisfied with the battery backup now. I'm thinking if i will flash Havoc, Lineage or Lower version of miui what do you think? which of these is good for battery?
gAracUh said:
Thank you very much for detailed instructions the reason why i want to downgrade is the battery life. I noticed after two consecutive update within one month the battery backup is not good like before. I am pretty sure about that because it has been 1 month since i bought this.
Even the power saver is always activated I'm not satisfied with the battery backup now. I'm thinking if i will flash Havoc, Lineage or Lower version of miui what do you think? which of these is good for battery?
Click to expand...
Click to collapse
Yes I did it due the same thing, for battery and ram management, but most of it perfomance, and I got it balanced on 10.3.5.0, not the best but it does the job for me. I haven't tested Havoc neither Lineage, but if just battery your concern, you can take a read to LionHeart90's Guide ON THIS LINK or you can go and try by yourself each ROM till you find the most one that suit for you :good:
BlackGarnett said:
Yes I did it due the same thing, for battery and ram management, but most of it perfomance, and I got it balanced on 10.3.5.0, not the best but it does the job for me. I haven't tested Havoc neither Lineage, but if just battery your concern, you can take a read to LionHeart90's Guide ON THIS LINK or you can go and try by yourself each ROM till you find the most one that suit for you :good:
Click to expand...
Click to collapse
Thank you for your response and for the link you gave. I think this is the day that i have been waiting for 78hrs to unlock bootloader. I guess i go with the Havoc. Thank you very much and God bless??
Update: Thank you again, I downgraded my Rn7 form 10.3.6 to 10.2.7.0
gAracUh said:
Thank you for your response and for the link you gave. I think this is the day that i have been waiting for 78hrs to unlock bootloader. I guess i go with the Havoc. Thank you very much and God bless?
Update: Thank you again, I downgraded my Rn7 form 10.3.6 to 10.2.7.0
Click to expand...
Click to collapse
Glad to know it helped you, Good luck and bless for you too. :good:
Hey,
How do I revert to stock and which ROM do I use for UK device? I can't find the correct one!
Also, do I just wipe and flash using TWRP?
Hi.
If you want to go completely stock, you can install the international (https://mifirm.net/model/davinci.ttt) or european (https://mifirm.net/model/davinci_eea.ttt) ROM with Mi Flash (fastboot ROM)
If you want MIUI and TWRP, you can use the Recovery ROM.
Schnedi said:
Hi.
If you want to go completely stock, you can install the international (https://mifirm.net/model/davinci.ttt) or european (https://mifirm.net/model/davinci_eea.ttt) ROM with Mi Flash (fastboot ROM)
If you want MIUI and TWRP, you can use the Recovery ROM.
Click to expand...
Click to collapse
Thanks. The recovery link does not work. Where can I get hold of this please?
OK. So I wiped everything and trying to install miui_DAVINCIEEAGlobal_V10.3.12.0.PFJEUXM_946a02f6df_9.0 with TWRP... I was trying to install through fastboot and I got the anti-rollback error.
The issue that I have now is that it keeps booting into recovery!? Help!
tristan1990 said:
OK. So I wiped everything and trying to install miui_DAVINCIEEAGlobal_V10.3.12.0.PFJEUXM_946a02f6df_9.0 with TWRP... I was trying to install through fastboot and I got the anti-rollback error.
The issue that I have now is that it keeps booting into recovery!? Help!
Click to expand...
Click to collapse
You can try flashing the stock fasboot ROM using Miflash. Just make sure to open the script and delete every line that refers to anti rollback protection, basically every line until the lines that starts with fastboot.
Use these links. You need .tgz file decompress it twice, till you have ordinary folders and files (cca 6,5GB). Then use MiFlash 2017 version (in the bottom right corner is option, if you also want to lock your bootloader). Put your phone to fastboot and flash it. It takes about 15 minutes and then you have clean phone.
http://en.miui.com/a-234.html
https://mirom.ezbox.idv.tw/en/phone/davinci/
http://c.mi.com/oc/miuidownload/detail?guide=2