Related
Hi,
My wizard run out of battery completly yesterday, I brought it home and try to recharge it, but no recharging light will appear.
I left it overnight connected to the mains but to no appeal,
I also removed the battery for a few minutes and then plug again but no luck.
I´m not using the mains provided adaptor but my travelling kit, a proporta mains/usb adaptor and a retractable sync/charge cable with a mini-usb pin cos I´m back home for Xmas and I don´t travel with the mains.
I have read about problems with some chargers from Boxwave, but I have consistently using this charging conbination since October.
Any ideas, should I send it back to expansys to repair, or is there anything else I can try?
Thanks
Elsral
same thing happened to me.. Supposely the phone will not charge from being completely dead without a charger that puts out 1amp. There is another method if you are a little brave... cut up an old car charger and hook it directly to the battery (red cord to + on battery and black to -) Read about it on howardforums and it worked like a champ. I only needed to jump the battery for about 30 seconds before I put it back in the phone and the amber light kicked on.. I was very relieved!!
Same happend to me yesterday. Simply plug the carger in and wait 1 or 2 seconds then switch the power button. After some seconds the carging light should switch on.
The wizard won't charge if it's switched off.
Export800,
you are a megastar,
I put apart a usb adaptor that I had built to charge my gps and I connected cables directly to battery for a minute and Voile,
tnx a million,
elsral
Xunil99 said:
Same happend to me yesterday. Simply plug the carger in and wait 1 or 2 seconds then switch the power button. After some seconds the carging light should switch on.
The wizard won't charge if it's switched off.
Click to expand...
Click to collapse
But if the battery is totally dead surely the unit wont switch on ? Thus its a catch 22 ??? There is no power to switch on and the battery wont charge totally dead.
Ridiculous if you were caught out away from a charger and ended up having to pull apart a usb lead to get things back to life.
If the battery is so low, that the wizard switches off itself, and you connect the charger, it won't charge, because it's switched off.
Use the power of the charger to turn it on, then charging will beginn (and also the device will boot).
Xunil99 said:
If the battery is so low, that the wizard switches off itself, and you connect the charger, it won't charge, because it's switched off.
Use the power of the charger to turn it on, then charging will beginn (and also the device will boot).
Click to expand...
Click to collapse
Can anyone else confirm this works as there have been many people having this problem. Simple solution if it works.
Switch off your device completely (hold the Power Button) and try to charge: Nothing happens. Now switch it on - charging begins.
I have noticed that last week, when battery was very low and i know that i would need my wizard in about half an hour. So i switched it off completely, so that it would charge faster and noticed that.
Yesterday when battery was totally dead i remembered that and i switched it on.
Btw, doesn't it damage the battery, if you connect it to 12 V (!!)??
Xunil99 said:
Switch off your device completely (hold the Power Button) and try to charge: Nothing happens. Now switch it on - charging begins.
I have noticed that last week, when battery was very low and i know that i would need my wizard in about half an hour. So i switched it off completely, so that it would charge faster and noticed that.
Yesterday when battery was totally dead i remembered that and i switched it on.
Btw, doesn't it damage the battery, if you connect it to 12 V (!!)??
Click to expand...
Click to collapse
If I come across the problem will certainly be trying your method before I will be ripping into any usb leads
The same thing happened to me this past weekend. We were out camping and my MDA's (wizard) battery went completely dead. I had a USB sync cable for my laptop, but that would not revive the unit. I'm afraid the only way to bring it back to life is with the original OEM charger which has an output of 1 amp. Thanks for the post!
I had the same issue a while back. At first I thought the moto charger I had was dead but then I plugged in a old SMT5600 and it worked fine.
I left it plugged into my computer for a hour or so and finally I heard the "new usb device blip" from the other room and it started to charge. Guess I was lucky.
Same thing happened with my wifes SMT5600. The battery died and she couldn't get it to charge with her moto mini usb charger. I plugged it into my machine and a hour later the charging light came on.
I have heard that the Wizard will not charge from my laptop using a usb cable if it is completely drain. I find this to be NOT TRUE.
I ran out of juice twice last weekend. The thing about the Wizard is that, if it's completely drained, it will get stuck at the boot screen, and go no further.
Take out the battery to turn it off again. Put the battery back in, and then plug in your charger. DO NOT TURN IT BACK ON. It needs all the power it can get. Give it a minute, and you will see your orange charge light come on. Just leave it alone for several hours, and it will charge. This is my experience.
I got it! But, first the story.
None of the above methods helped me. I tried plugging it in to a big truck lighter, a pickup truck, even an ac adapter for my coleman cooler. Nothing!
However, I had a powered Pro-Clip mount that I had as a backup for the one I use. Guess what? THAT worked!
I think the cable makes the difference. Need to find the specs on those puppies. LOL
Thanks for the help.
This morning I almost got a shock because my X1 stayed black and seemed to be totally dead. Luckily I soon figured out that the Battery was empty, no currrent left on it to let the device even blink. But what happened? When I went to bed yesterday I connected it to the USB cable and left it charging! Everything seemed the same as all the times before. What may have caused this?
Only things that were diffrent from my usual charging procedure:
The Cable were connected to the PC USB Slot.
I shut the PC (laptop in this case) down but the USB Slots had still power. The charging lights of my X1 followed their normal pattern.
Normally I unplug the power cable from PC to prevent the USB Slots to have power. Because my USB harddisk keeps rotating while having power from the USB.
Normally I charge the X1 directly from the power outlet. X1 turned off.
So this time PC was off. X1 was off. USB Slots still got power. X1 connected with USB Slot. X1 seemed to charge normally.
Well, the result was that my X1's Battery was totally empty the next morning. Obviously instead of charging the USB slot drained of the whole battery power! But note that the charging lights were active as normal and the Battery was still warm in the morning.
Perhaps this helps others to prevent such issues.
you are crazy if you:
1. charges from laptop
2. from powered OFF device
you can repeat this case endless - xperia will be drained
Dadaism said:
This morning I almost got a shock because my X1 stayed black and seemed to be totally dead. Luckily I soon figured out that the Battery was empty, no currrent left on it to let the device even blink. But what happened? When I went to bed yesterday I connected it to the USB cable and left it charging! Everything seemed the same as all the times before. What may have caused this?
Only things that were diffrent from my usual charging procedure:
The Cable were connected to the PC USB Slot.
I shut the PC (laptop in this case) down but the USB Slots had still power. The charging lights of my X1 followed their normal pattern.
Normally I unplug the power cable from PC to prevent the USB Slots to have power. Because my USB harddisk keeps rotating while having power from the USB.
Normally I charge the X1 directly from the power outlet. X1 turned off.
So this time PC was off. X1 was off. USB Slots still got power. X1 connected with USB Slot. X1 seemed to charge normally.
Well, the result was that my X1's Battery was totally empty the next morning. Obviously instead of charging the USB slot drained of the whole battery power! But note that the charging lights were active as normal and the Battery was still warm in the morning.
Perhaps this helps others to prevent such issues.
Click to expand...
Click to collapse
Don't charge it in standby mode, how stupid is that?
What? I don't see any reason not to charge it from a laptop. Even if it's powered off, as long as the USB ports have power (mine has a BIOS setting for this) there is nothing wrong with that.
Also, what does it matter if you're charging the phone powered off or powered on?
On an interesting note, however, the same thing actually happened to me last night.
I plugged the phone into the wall socket to charge it (battery was at about 20%) and I actually saw the battery percentage rise as I was still using the phone. I turned it on in the morning (from standby, not powered off), and as soon as I pulled the power cable it went dead as the battery was completely empty.
I have no idea what might have caused this, and it hasn't happened to me before.
Next time dont power off ur X1,
if same happends then your battery is suffed.
Ethermind said:
1. charges from laptop
2. from powered OFF device
Click to expand...
Click to collapse
1) This was accidently
2) Why? I dont like it when mobile phones are on standby while I'm asleep. Charging the device when powerd off should make absolute no difference? Worked everytime but the one where it was connected to a powered of laptop.
Why will the Xperia been drained?
poetryrocksalot said:
Don't charge it in standby mode, how stupid is that?
Click to expand...
Click to collapse
Do you mean standby or powered off? Why should it make any difference? And why does the battery getting drained?
Jasand said:
Next time dont power off ur X1,
if same happends then your battery is suffed.
Click to expand...
Click to collapse
My Battery is quite healthy. *lucky*
jjm34 said:
What? I don't see any reason not to charge it from a laptop. Even if it's powered off, as long as the USB ports have power (mine has a BIOS setting for this) there is nothing wrong with that.
Also, what does it matter if you're charging the phone powered off or powered on?
On an interesting note, however, the same thing actually happened to me last night.
I plugged the phone into the wall socket to charge it (battery was at about 20%) and I actually saw the battery percentage rise as I was still using the phone. I turned it on in the morning (from standby, not powered off), and as soon as I pulled the power cable it went dead as the battery was completely empty.
I have no idea what might have caused this, and it hasn't happened to me before.
Click to expand...
Click to collapse
What does this BIOS setting say? I assume that my USB slots had too less power when laptop is off. But its very strange that your Device got drained while connected to the wall socket and in Standby mode. Maybe my USB slots were not the cause? Weird ...
Dadaism said:
What does this BIOS setting say? I assume that my USB slots had too less power when laptop is off. But its very strange that your Device got drained while connected to the wall socket and in Standby mode. Maybe my USB slots were not the cause? Weird ...
Click to expand...
Click to collapse
It is weird. Since your phone was off I don't think it would use any of its battery power.
I have a ThinkPad, and IIRC the BIOS setting is something like "Always On USB", in the USB settings. With this turned on the laptop will power its USB ports even when turned off, as long as the laptop itself has the power cable connected.
Dadaism said:
2) Why? I dont like it when mobile phones are on standby while I'm asleep. Charging the device when powerd off should make absolute no difference? Worked everytime but the one where it was connected to a powered of laptop.
Why will the Xperia been drained?
Click to expand...
Click to collapse
from powered off PC, when power on usb enough to wakeup PC or feed LEDs,
but not to charge another device. in that case power go into the weaker side, means from x1 -> pc
I had this problem too... seems after hard resetting my phone one time, one option was different to normal after I hard reset,
Click on the battery icon at the top of the screen
Theres a tick box, that says:
"When device is turned on, do not charge the battery when connected to the PC."
this was ticked for some reason. Unticked it, and all was fine.
Try it
I noticed this happened to me too for the first time, after i put in the wall charger and the the phone seemed to charge, i found it completely dead after 3 hours and the battery was warm, running a vanilla R1A
Battery
Also I think for the X1 to charge- it requires activesync. from my experience, when connected to the pc- without activesync, the X1 would indicate charging- but never actually gets charges. Hence when your notebook is off, activesync obviously wouldn't be running-> no charge either.
chinkyeyed09 said:
Also I think for the X1 to charge- it requires activesync. from my experience, when connected to the pc- without activesync, the X1 would indicate charging- but never actually gets charges. Hence when your notebook is off, activesync obviously wouldn't be running-> no charge either.
Click to expand...
Click to collapse
I assume a turned off PC would only power its USB port power pins and wouldn't respond to any transmissions on the data pins. So to the phone it should look just the same as if it were connected to the wall charger (just probably with a bit less power).
Also, when I have my phone connected to my laptop through USB Internet Sharing it does actually charge (it doesn't connect to ActiveSync when using Internet Sharing).
The device should charge in any USB mode as the USB port's power pins supply power regardless of the protocol used on the data interface.
Does the X1 have no safety feature that does prevent the battery from being drained?
In my case I assumed it happened because of the USB Port had too less power. But when you turn off your PC (+USB power) and let the X1 connected it would still mean a movement of current from the X1 Battery --> inside the PC as long as they are not on the same potential. If the PC is earthed somewhere (for example connected to the wall socket) the Battery would be drained out totally! They never get to the same potential as long the Battery has power.
As jjm34 mentioned, if the PC is on and USB slots powered normally the X1 should charge in any case.
Maybe this is not the real cause of the problem. People are reporting that the X1 got drained while connected to the wall charger! That's really weird. How can the battery being drained by this? Any suggestions @Ethermind ?
jjm34 said:
I plugged the phone into the wall socket to charge it (battery was at about 20%) and I actually saw the battery percentage rise as I was still using the phone. I turned it on in the morning (from standby, not powered off), and as soon as I pulled the power cable it went dead as the battery was completely empty
Click to expand...
Click to collapse
viperhead said:
I noticed this happened to me too for the first time, after i put in the wall charger and the the phone seemed to charge, i found it completely dead after 3 hours and the battery was warm, running a vanilla R1A
Click to expand...
Click to collapse
It could be:
It's drawing power FROM your x1 to provide power for laptop internal components.
Dadaism said:
...............
Maybe this is not the real cause of the problem. People are reporting that the X1 got drained while connected to the wall charger! That's really weird. How can the battery being drained by this? Any suggestions @Ethermind ?
Click to expand...
Click to collapse
Mine has. Put it on the wall charger and the charging symbol is there. It reaches 100%, the charging symbol disappears and it shows 100. Then in the morning it's at 90% even though it was still on the wall charger.
I've not left it plugged into a 'running' pc or laptop long enough to see if the phone runs off the battery after it's reached 100%, but it shows the same symptoms. Charging symbol until 100%, then it changes to 100%, no more charging symbol.
Even MSVC stops reporting '% & charging', just reports the % level once it's reached 100%.
I made 2 observations :
It seems the X1 need usb data pins active to charge the battery. The wall plug has something enabled to give power to the data pins (by the way, the wall plug can charge an iPod or an iPhone, it works perfectly). I tried using a cheap wall plug bought in china, no way to charge the X1 or my iPod as there was no power on the data pins. So when connected to an off PC, I'm not sure what's happening. If someone can give a try to analyze this with a multimeter, that would be nice.
It seems also the X1 stop charging after going to 100 %, and won't charge anymore unless you unplug - replug it.
Thanks for your contribution.
Maybe there exists a real hardware failure.
Normally the X1 should charge until the Battery reaches the 100% level. Then there has to be a switch that prevents the Battery from getting overloaded which is good. So charging stops.
The switch blocks charging until you unplug the device once it has reached the full battery level. Thats ok, too. You should not loose much Battery after a full charge and with a device on standby or powered off. And it prevents the Battery getting reloaded at high percentages. Otherwise it would start charging at 99% and stop again at 100 and so on, all the time.
But now assume the switch has sometimes, somehow a failure.
Instead of preventing current to get inside the battery it enables that current can flow into the wall charger.
I do not expect that the current flows into the power outlet. Maybe it gets "lost" in the current transformer that you've plugged into the power outlet (Thats the one you plugged the USB cable in.). Lost means it simply gets warm / hot.
Measuring the current with a Multimeter would be a nice proof. If someone has the technical knowledge and qualification to disassemble the current transformer and the USB cable, you have the go .
I haven't tested it, but I doubt the current flows back into the charger, or back into the USB port on a laptop / pc.
But how does the Battery discharge then? When there is no current flowing out it will stay loaded. (it goes like d(q)/dt+div(j)=0 )
Did you all charge your phone while it is on (standby)? I noticed the same problem when I charged my x1 while it is standby. When I pull the plug from my laptop (I used my laptop for charging, laptop powered on), I get 90% battery life. It seems like there is a switch to cut out the power input if the battery reaches 100% and power the phone from the battery.
Try to charge your phone while it is off. I did it yesterday, and it had stopped charging even before I unplug it from wall output, and I got 100% battery life.
Btw, this is not confirmed yet... it is just based on my experience...
Damn it..... i dont know what happened
it is still working perfectly yesterday
i did not drop the phone or battery, today the battery is still at 40% and as usual, before i went to sleep, i plug my phone on the USB Cable connected to my computer... but it is not charging.. and here i thought the error comes from my USB Cable , so i plug it into my wall charger ... but it is not charging at all!!!
and i thought, perhaps i have installed something , or some os faulty issue ... so i reset the phone via SETTINGS > About > Reset Phone
and after the reset.. it is still not charging...
argh what should i do... please help... anyone
i purchased this phone from singapore.. and i am indonesian.... the battery is currently at 30% , i am so afraid after it runs out of its juice, it will go away forever (because i cant charge it) T.T
what should i do....
(Is this battery and the one used on Galaxy S is the same? My sister has Galaxy S, should i try using her battery and try to charge it from my phone? .... ARGHHHH the omnia 7 is not even available yet in indonesia) T.T
Anyone help T.T
Get another charger it will charge get a new 1
Sent from my Nexus One using XDA App
you sure it is the charger?
You are talking about the wallcharger right?
usually it already charging via USB Connected to a computer.. but this time... the computer does not even detect if anything is connected.... (nothing happened when i plug this phone to my pc, usually there is a notification sound playing and my zune will autorun)...
damn it ... why this happened.. yesterday it is just fine (
damn it .. i am sleepy already..
i will go and sleep for now.. and left my phone turned off and plugged in the WallCharger
and hopefuly.... sigh.. it is still charing although no indication whatsoever is showing that
MAN... should i just try bang the damn battery hard onto the table... perhaps some of the chip inside the battery is misplaced by whatever unknown forced?!
damn it.. i never dropped the phone.... ARGHHHHHHHHHHHHH
this is so frustrating
Relax
Relax man your charger is bad.
I have the same problem but my girlfriend have a Wave and start using his charger and everything works fine.
Buy a new charger
question
can i use any charger from any phone for this Omnia 7?
(the one that has USB Output of course, such as xperia1 charger)
if we can, then it is also not working.... and why suddenly it wont do anything when i plugged it in my Computer USB
the very same computer works perfectly yesterday, and suddenly it is not working..
I suspect either one of these is the problem :
1. the micro USB Connector in the Phone is broken somehow , hence the when we plugged it on, it does nothing
2. the Battery (which if i am not mistaken has a chip inside) is broken, hence explain why it is not charging at all (which a bit does not make any sense, if it is just not charging at least when i plug it on the computer, it should still detect this device...)
I am from indonesia, i can ask my friend who is returning from melbourne to purchase a new battery and new charger hopefuly
Okay to make things simpler.. i have a sister who own a Galaxy S
can i use the galaxy s wallcharger to charge my omnia 7? ah hell,i will try it anyway...
okay according to this
http://www.samsung.com/us/mobile/cell-phones/SGH-I917ZKAATT
it goes great with galaxy s standard battery...
so i suspect, i can use my sister galaxy s standard battery and try to charge it using my cellphone
and i can also try to use my sister galaxy s wallcharger to charge my battery...
okay lets try ... hopefuly.... it is only the battery.. i can easily purchase a new battery... if it is the USB Connector on the phone... damn, how on this green earth can i charge my battery? OH we can use the kickstand battery charger?
hmm suddenly it is working now :O
thanks God... hopefuly it will never ever happened again T.T
Great it is working again
Any possibility that there is a way that the device forces a full recharge cycle to calibrate the battery?
Honestly i guess so.
I have the same problem...i can t charge my i8700 at all...what did you do to charge again???...i use a universal charger where i put my battery ...this happens for two weeks now..
cody28 said:
I have the same problem...i can t charge my i8700 at all...what did you do to charge again???...i use a universal charger where i put my battery ...this happens for two weeks now..
Click to expand...
Click to collapse
Try allowing the phone to run out of battery and turns off, then plug it into the charger, i would love to know if this is a failure or be design behavior.
Put the battery in the phone,
Wait untill the phone goes completely off.
Plug the phone to the wall charger.
write back here
i tryed this but the same problem it turns on but only while the charger is pluged in when i pull it out the phone turns off...i try to hard reset nothing..there is no update to work with non retail devices...the phone is from three uk...i m from romania there is no way to return there to an service..(
Having the same problem. Been working flawlessly.Plugged it in a couple of hours ago,but it doesnt appear to be charging.
When I use the USB charger on the PC, it is recognised, and Zune opens up fine and Phone shows up.
Have tried two Mains chargers, the Omnia 7 one and the one that came with my Galaxy S, same problem.
EDIT:
Left it plugged in overnight and it charged fine.Used phone, going down to about half battery.Plugged it in and seems to be charging without a problem!
I've got the same problem as you guys for a couple of days now.
Thanks for your reactions i will try everyone of them untill my omnia 7 charges again
knetsooj said:
I've got the same problem as you guys for a couple of days now.
Thanks for your reactions i will try everyone of them untill my omnia 7 charges again
Click to expand...
Click to collapse
Do you have a bit of battery left?
Windows Phone 7 devices power up when you plug them in. Maybe the OS is not booting and because it is S-AMOLED display we cannot tell if it is on or not.
Try Hard Resetting without booting WP7
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Omnia_7
Make sure you have a bit of power though, you don't want that to stop in the middle of the proccess
This has happened to me a couple of times. I think it's just a reporting bug, the battery is actually charging. I just have to restart the phone and it magically has charge
battery is charging too long
How long does take to fully charge the battery? For me it's about 4-5 hours with wall charger. Should not it be faster?
Mine is about the same for a full charge and I have also noticed my Omnia 7 not charging properly when I plug it into my MacBook Air however it does seem to charge fine on my Dell laptop for work.
Maybe the Omnia 7 is very sensitive for charging over USB on a laptop and needs a certain voltage for it to charge properly?
What works for me:
1. Original charger
2. iPhone 4 charger
3. iPhone 3GS charger
4. Blackberry Curve charger
Not tried any other micro-usb cables yet but will do at some point in the future.
I had the same problem too. The battery was suspiciously showing high levels for the last three days (went without a charge!). In the morning, the alarm did not go off, and I realised the battery was dead dead! Charged (wall charger) for 1.5 h without any use -- would turn off if I unplugged. Tried with the USB cable too (connecting to computer) and no use.
I read this post, and tried with the wall charger again, and it shows me ~60% battery, and seems to be charging normally!
Will post an update, but really seems like a forced discharge cycle to me too!!
Thanks for this thread, and I am interested in seeing if any more ppl are seeing such issues!
At least once, but sometimes twice a week, my battery keeps discharging while my Omnia 7 is attached to USB. And even the icon shows it should be charging.
The solution I use is taking the battery out for 10-15 seconds, put it back in, switch the device on, and charging works like it should be.
I hope they come up with a solution, because it's quite annoying.
Willem
Netherlands
I was reading that that a lot of you guys have issues with Android not displaying the real charge of the tablet and I was experiencing this issue for a while as well. In my case it was an easy fix, simply power off the tablet, carefully pry off the back, then disconnect the battery cable carefully (it's the cable coming from the big black thing on the bottom, google to find out where), finally hold the power button for about 10-15 seconds with the battery unplugged, this creates a static reset, using all of the electricity in the device and discharging it fully; it fixes all sorts of ****. Put it back together and you should be good to go.
It happened yesterday to my totally new nexus 7 16gb.
I charged it for about 8 hours while the tablet was turned OFF. When I turned it on it appeared to have 60% of battery... :-/
I reset the device and then again 60%..... So I charged it again and with no problem appearing, it charched untill 100%..
That happend only once, in its 3rd charge.
Any idea?
battery stuck at 0%
I was having this problem as well, my nexus was showing 0% battery. I took the back cover off and figured out that the battery cable was not pushed all the way into the socket. If anyone else is having this problem be sure to double check the battery cable is all the way in.
tmann80 said:
I was having this problem as well, my nexus was showing 0% battery. I took the back cover off and figured out that the battery cable was not pushed all the way into the socket. If anyone else is having this problem be sure to double check the battery cable is all the way in.
Click to expand...
Click to collapse
i experienced that too.switched off then after 5 hours of charging, the % was 54%. then i unplug the charger, remove the cable, unplug the 3pin . reinsert all the 3pin and cable, then continue charging. surprisingly, the charging the is quiet fast. so dont ever remove the cable from the charger. maybe there is something wrong with the asus charger
I am facing weird battery status..it shows me 0% in red danger zone even though fully charged, but after some hours status changes to normal remaining battery...I unable to understand how can I fix this...as I am not getting exact battery status...its now also showing 0 % with charger plugged....
Sent from my Nexus 7 using xda premium
worked great thanks
I found the black wires askew pushing them back in did the trick thanks!!
Nexus 7 2012 1st gen 0% battery but on battery settings says 2 days
tmann80 said:
I was having this problem as well, my nexus was showing 0% battery. I took the back cover off and figured out that the battery cable was not pushed all the way into the socket. If anyone else is having this problem be sure to double check the battery cable is all the way in.
Click to expand...
Click to collapse
I did this took battery cable out and reconnected but still showing 0% battery but it shows 2 days battery on battery settings and still wont let me update from 4.4.4 to L5.0.2
I've noticed that when I leave the phone plugged in overnight it sometimes just seems to stop charging at a random point somewhere throughout the night and I'll wake up with a phone that is only at 80%, 65%, etc.. battery. It isn't fully charging and then just being drained again either, it just randomly stops charging. It will recognize that a charger is plugged in and even says that it is charging but the percentage indicator in the Settings pulldown doesn't move. This doesn't happen every night and it has never happened when I charge the phone during the day. I assume it only happens at night because I'm not at my desk using it. I can also assume that the device isn't taking 8 hours to go from 35% battery to 75%, it doesn't charge that slowly. Any ideas?
P.S Rooted but on stock ROM
Heartbreak said:
I've noticed that when I leave the phone plugged in overnight it sometimes just seems to stop charging at a random point somewhere throughout the night and I'll wake up with a phone that is only at 80%, 65%, etc.. battery. It isn't fully charging and then just being drained again either, it just randomly stops charging. It will recognize that a charger is plugged in and even says that it is charging but the percentage indicator in the Settings pulldown doesn't move. This doesn't happen every night and it has never happened when I charge the phone during the day. I assume it only happens at night because I'm not at my desk using it. I can also assume that the device isn't taking 8 hours to go from 35% battery to 75%, it doesn't charge that slowly. Any ideas?
P.S Rooted but on stock ROM
Click to expand...
Click to collapse
Do you have another charger/cable connection you can try?
Stryder5 said:
Do you have another charger/cable connection you can try?
Click to expand...
Click to collapse
I'll give it a shot. Thank you.
I tried it with a different cable last night and it did the same thing. Forgot to mention I'm charging it through my computer.
Heartbreak said:
I tried it with a different cable last night and it did the same thing. Forgot to mention I'm charging it through my computer.
Click to expand...
Click to collapse
I would try the charging cable that came with it and if it still does the same thing I would say you have a problem with your phone.
Sent from my Nexus 4 using xda premium
coldfusionb said:
I would try the charging cable that came with it and if it still does the same thing I would say you have a problem with your phone.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Yeah, I have been using the cable that came with it. I've tried two different ones. I will try to see if it happens when charged through wall outlet.
Sorry for double post. Couldn't figure out how to attach image to an edit.
I looked at my battery settings and this is what I noticed. It looks like my phone is charging all the way up during the evening and then draining but the charging isn't kicking back or something. The huge gap in screen on time was when I was sleeping and there was no use of the device but battery is steadily draining.
Heartbreak said:
Sorry for double post. Couldn't figure out how to attach image to an edit.
I looked at my battery settings and this is what I noticed. It looks like my phone is charging all the way up during the evening and then draining but the charging isn't kicking back or something. The huge gap in screen on time was when I was sleeping and there was no use of the device but battery is steadily draining.
Click to expand...
Click to collapse
Have you tried using the wall charger?
Stryder5 said:
Have you tried using the wall charger?
Click to expand...
Click to collapse
As stated in previous post, I have not. That is the plan when I get home.
I have tried it through the wall charger for the past few nights and it charged just fine. I also tried it through the same cable that my N7 and Gnex were charged with and it still happened. I also tried various USB ports. Any ideas?
Sent from my Nexus 7 using xda app-developers app
Is it possible the computer is sleeping and no longer powering the USB ports?
I had exactly the same problem for one night.
But it can't be a problem with my Notebook because
my Galaxy S charged just fine.
Probably due to power saving options on your computer, be they USB power saving settings or sleep related. If you want to charge faster you should definitely use the wall charger, USB charging is painfully slow for me... if i am using the device, load can exceed the incoming current and the phone will still discharge. Moral of the story > USB charging = useless.
negroplasty said:
Probably due to power saving options on your computer, be they USB power saving settings or sleep related. If you want to charge faster you should definitely use the wall charger, USB charging is painfully slow for me... if i am using the device, load can exceed the incoming current and the phone will still discharge. Moral of the story > USB charging = useless.
Click to expand...
Click to collapse
It really isn't a matter of slow charging. I'm charging it overnight so the speed at which it charges doesn't matter to me. As long as it is charged when I wake up. I've been using the same computer to charge my phones/tablets/cameras for two years and I've never had a problem. I'm not even using the device though, it is at night when I'm sleeping.
I have the same problem all of a sudden. Happened twice in the past week, never happened for months before. I never charge from a computer, always with the provided adapter and cable from the wall. A few hours into the night, before the phone is at 100% (varies from 70-90%), it just stops charging. Battery graph looks very similar to the one in this thread already posted.
I wonder which device switches the current off, the phone, or the wall adapter. I would have guessed the phone, and if that is correct swapping the wall adapter won't do anything.
Or you can use Fast Charge from Google Play and flash Franco Kernel.
Then you'll be able to switch from USB Charge to AC Charge by charging with your computer.
However, the battery will heat and you may consume its life, so do not do that too often, only when necessary if you expect using your phone very long times as i do, i just change phone every 5 years or more, depending of my needs.
Also, i noticed than USB Charging slowing down the charge at around 80%, but still charging, i read with Battery Monitor Widget, and i seen it will gives minus ampere.
I almost forgot, you may also calibrate your battery, the first time, charge it to 100%, then remove the file "batterystats.bin" from /data/system or wipe it threw Recovery, that will ensure you to use your battery to 100% next time.
Mine seems to stop charging at 100% and go back down also. Mine usually is between 95-100% when I wake up though. Is that just how this phone works to protect the battery? I've never noticed this in any other phone I've had.