Related
Hey guys!
i recently got Galaxy S5 ( screenshot Attached) i got it used, and at the time of buying i didn't know it was rooted. It has Android 4.2.2 when i try to update via System update. It says Operating system on your device has been modified in unauthorisd way....... so i cant seem to update my phone. Is there any way to get the new update Lolipop i try to search by i cant seem to find something related to my baseband G900fzhu1ancd .
so if anybody can guide me in the right direction will highly appreciated. I'm very new to This flashing and Rom stuff, but what i figured is we need to find same Rom that can support our baseband version?? we cannot flash any Rom? Right???
Go to sammobile . com and enter your S5 Model (G900F) into the firmware section, select your region from the drop down, and download that ROM
Instructions for flashing that to your S5 are under the download on that site
grown ups said:
Hey guys!
i recently got Galaxy S5 ( screenshot Attached) i got it used, and at the time of buying i didn't know it was rooted. It has Android 4.2.2 when i try to update via System update. It says Operating system on your device has been modified in unauthorisd way....... so i cant seem to update my phone. Is there any way to get the new update Lolipop i try to search by i cant seem to find something related to my baseband G900fzhu1ancd .
so if anybody can guide me in the right direction will highly appreciated. I'm very new to This flashing and Rom stuff, but what i figured is we need to find same Rom that can support our baseband version?? we cannot flash any Rom? Right???
Click to expand...
Click to collapse
i ddi that, their many form SM-G900F but i cant find any for My baseband do i have to download any specific that matches my baseband or i can just download any version from the list flash it.
I'm from Pakistan and its not on the list, and i dont know phone is from Pakistan either. how can i check i already uploaded screenShots of devise info.
some other information if that helps, just put me in a rigth direction.
Anybody !!!!!
just one thing if anyone have time. if i want to upgrade from 4.4.2 to 5.0 and i have galaxy s5 SM-g900F. do i just have to go sam mobile and search for firmware for my model and can pick any 5.0 version or i have to see for any other thing like baseband version or kernal etc...
my region is not on the list.. please i really want the update.
What is your S5 Model? You can used even the firmware of other country as long as you have the same model no problem with that. Based on my experienced I am from Philippines and I am using UK which is my original baseband is XTC.
grown ups said:
i ddi that, their many form SM-G900F but i cant find any for My baseband do i have to download any specific that matches my baseband or i can just download any version from the list flash it.
I'm from Pakistan and its not on the list, and i dont know phone is from Pakistan either. how can i check i already uploaded screenShots of devise info.
Click to expand...
Click to collapse
ginofakes said:
What is your S5 Model? You can used even the firmware of other country as long as you have the same model no problem with that. Based on my experienced I am from Philippines and I am using UK which is my original baseband is XTC.
Click to expand...
Click to collapse
i shared all the screenshot above of my phone. please that. i Have Galaxy s5 Sm-g900f.
so i can use any firm of any country??
grown ups said:
i shared all the screenshot above of my phone. please that. i Have Galaxy s5 Sm-g900f.
so i can use any firm of any country??
Click to expand...
Click to collapse
sorry my bad. As far as I know and based on my experience yes as long as same model. I do not know and not so sure about your device but on my device it is possible. Originally a XTC and currently using UK
maybe anybody can comment further thanks for your replies..
Just pick the closest region to you for the G900F if that is your model, if you can't find your own
BTU = United Kingdom
yes my model number is G900F.
Hello everyone,
I am currently in Korea but I bought Note 3 (N9000) from my country (Pakistan). Up till now, I have not got any update for the android version while here (in Korea) this update is available for months. Can anyone tell me how can I upgrade my phone's android version? Also I don't want to ROOT it or use custom ROMS and android versions. Thank you.
Umar931 said:
Hello everyone,
I am currently in Korea but I bought Note 3 (N9000) from my country. Up till now, I have not got any update for the android version while here this update is available from months. Can anyone tell me how can I upgrade my phone? Also I don't to ROOT it or use custom ROMS and android versions. Thank you.
Click to expand...
Click to collapse
1. First, identify your device installing this APP. Add screenshots here if you need help.
2. Go to Sammobile.com and download the correct firmware for your phone.
3. Flash this firmware via ODIN.
4. Done.
Thank you for your reply. I have installed the app you have recommended. Country of origin is China while the firmware used is of Pakistan. Not any firmware is available for Pakistan in the list. Also does this involves rooting or any loss of functionality? (Flashing the android version manually)
Umar931 said:
Thank you for your reply. I have installed the app you have recommended. Country of origin is China while the firmware used is of Pakistan. Not any firmware is available for Pakistan in the list. Also does this involves rooting or any loss of functionality? (Flashing the android version manually)
Click to expand...
Click to collapse
Relax. Add a external link with the pics and i will help you with it.
Alright. When I paste the links, I get the error that I cannot paste outside links. I have uploaded the screenshots on megaupload. What should I do now?
Thank you!
First of all i want to ask you whether firmware of model Sm-n900S can be installed on sm-n900L?
As there are many updates for 'S' model but no update for sm-n900L.
Secondly do i have the latest baseband, firmware?
I've added phone info + screen shots. Please guide me as my phone is getting slow and consuming more battery.
Baseband Version: N900LKLUNFNK1
and in the end, i was trying to install 6.0.1 rom but phone do not boot after samsung logo screen, please Guide.
One NO
Two baseband is modem not firmware .
http://forum.xda-developers.com/showthread.php?t=2484602
okay can you help me with most updated modem for my device as there is quiet less information about L model on internet (as per my search)
Try sammobile forum for firmware
Sent from my GT-N8013 using XDA-Developers mobile app
Read this for bootloaders and modem.
http://forum.xda-developers.com/galaxy-note-3/general/direct-download-bootloaders-modems-t3258803
Why do you need to update it? If it works fine, why try to fix it?
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
[email protected] said:
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
Click to expand...
Click to collapse
Tx vry much for help but can you give a link rather than sammobile
gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Dewang rocky said:
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Click to expand...
Click to collapse
Here's the screenshots.....
Plzz help
gurpreet4u15 said:
Tx vry much for help but can you give a link rather than sammobile
Click to expand...
Click to collapse
Sorry I don't have any other link
[email protected] said:
Sorry I don't have any other link
Click to expand...
Click to collapse
It's ok dude atleast you helped
gurpreet4u15 said:
i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin.
Click to expand...
Click to collapse
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
gurpreet4u15 said:
Here's the screenshots.....
Plzz help
Click to expand...
Click to collapse
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Dewang rocky said:
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Click to expand...
Click to collapse
Official ROMs for F & FD models are same...
p2kin said:
Official ROMs for F & FD models are same...
Click to expand...
Click to collapse
Oh thanks,am planning to flash afgan F on my indian FD
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
troxter said:
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
Click to expand...
Click to collapse
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
madkhaz said:
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
Click to expand...
Click to collapse
Download and install USB drivers for Samsung Galaxy S7 edge in your computer.
Make sure to take backup of any important files on your smartphone.
Enable USB debugging option by pressing Menu > Settings > Applications. Navigate and tap on Developer Options to ensure that USB Debugging is enabled.
Ensure that your Galaxy S7 edge carries more than 70% of charge.
Highly Credible Leak Points At Early Samsung Galaxy S7 Launch Date
Unzip Odin on your computer and install it.
Unzip firmware zip file in the same folder as Odin.
Switch your Samsung Galaxy S7 edge off and boot it in Download mode: press and hold Volume Down and Power together and then press the Home key. OR, check how to enter Download Mode.
Open Odin and connect your smartphone with your computer. When connected successfully, one of the ID:COM boxes will turn yellow with the COM port number after a while. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
On your Odin, select files:
Click on AP and select file with AP in its name.
Click on CP and select file with MODEM in its name – ignore if you didn’t get any such file.
Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
Click on PIT and select the. pit file – ignore if you didn’t get any such file.
Click on BL and select file with BL in its name – ignore if there is no such file.
Make sure to check Auto Reboot and F.Rest Time. Check Re-Partition only if you selected the. pit file.
Click on Start to initiate the update process.
When Android 6.0.1 Marshmallow update installation is successfully completed, you will get a PASS message.
I don't know if factory reset is necessary after flash, but I did it, just in case. I attached Odin which I used.
p2kin said:
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
Click to expand...
Click to collapse
What's the difference ??
gurpreet4u15 said:
What's the difference ??
Click to expand...
Click to collapse
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
p2kin said:
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
Click to expand...
Click to collapse
Okk Tx dude......
Official Android 7.0
Hi
I have G935FD device, which I recently bought (the second hand one).
I notice that I have issue with GPRS data transfer... it looks like, from time to time when GPRS is active SMS sending is not possible any more (up to next power OFF of device) .
At that time I'm able to see only one GPRS range indicator.
I'm able to receive calls from both SIM cards.
I did not check am I able to call from both of them.
According to my google investigations issue is pressent in Android 6.0, which I have right now.
Case shall be easy, I need to update to Nugat verision and it is all , but...
1) If I'll check firmware update on my mobile I have inforamtion that it is the latest version of firmware G935FXXU1APD1// G935FXXU1APB6. what is not true
2) I started to looking for official Android 7.0 version. to get it, I have to have CSC code. Phone info application have cleared out all CSC code. *#1234# don't work - "error message connection error or wrong MMI code".
Device type is hero2lte
Product name is hero2ltexx
Product code is SM-G935FZSU - this looks like oryginal information .
Bootloader : G935FXXU1APB6
PDA Version: G935FXXU1APD1
Baseband Version" G935FXXU1APB6
CSC Version :
Kernel Version
3.18.14-7538748
[email protected]#1
64-bit
knox warrantz void: 0x0
Does any one know what can be the oryginal CSC code for such device?
Can you tell me where can I find oryginal Android 7.0 which will works fine in Poland ?
Thanks in advance.
Hi
Below information for anyone who have the same issue as I.
I download the newest official ROM for Android 7.0 for Poland (G935FXXS1DQHI).
I used ROM for single sim, not dual sim.
Since that I don't have any issue with SMS or GPRS any more.
MMI codes started to work back.
I still have dual sim .
Simple , now it works better !!
I got a used GT-935T phone very recently in India, which was still running android 6.0. On browsing these forums, I found out that we could flash stock rom on it without rooting, so I did so using Odin. I flashed the stock rom of Android 7.0 for t-mobile 935T, which was what my phone was supposed to be.
On further browsing, I also discovered, that we could flash any stock rom on the phone, irrespective of the region. So I decided to download the latest stock rom for India 935fd. I did so, but whenever I'm trying to flash it using Odin, I'm getting an error - repartition failed.
I've not checkd the repartition option.
can someone help me?
Hi.
I am using 935F single sim THL csc mobile
I want to change it to IND csc.
Is their any possible solution.
I need voWifi its only available in indian csc.
Also i am staying in india.
My present mobile details are as below.
Product Code: SM-G935FZKAINS
PDA: G935FXXS8ETC7
CSC: G930FODD5ESE1
Baseband: G935FXXS8ETC7
Bootloader: G935FXXS8ETC7
Single sim 935F. Android version 8.0.0
hi, i have a s5 (klte) SM-G900M the device is from the carrier claro from the Dominican Republic (LatinoAmerica) and im running LOS on the Nov 8 (2017) Build and i haven't updated the OS since then, i have been experiencing some random reboots when using open camera and other occasions, and i want to update the device to the latest build, but i have been told that the new s5 builds require the latest baseband ,back when i installed lineage os , my phone was on lolipop and i installed LOS on the phone without updating to Marshmellow (my bad :l), im running this baseband version: G900MUBU1BOE2 (wich was released in 2015), i have tried to find the "latest" version of the baseband but that seems to be the latest one for my particular device (the Dominican Republic S5) was released in 2015 , and i don't know if istalling another more update version of the baseband of other country, will introduce problems with the carriers from my country (The Dominican republic) , i have a backup of the stock touchwiz rom , but apparently i can't install the OTA because i have TWRP 3.1.1 installed and since it replaced the stock recovery, the OTA is no longer possible to install, i would greatly appreacite any help regarding this situation :/
THEwed123wet said:
hi, i have a s5 (klte) SM-G900M the device is from the carrier claro from the Dominican Republic (LatinoAmerica) and im running LOS on the Nov 8 (2017) Build and i haven't updated the OS since then, i have been experiencing some random reboots when using open camera and other occasions, and i want to update the device to the latest build, but i have been told that the new s5 builds require the latest baseband ,back when i installed lineage os , my phone was on lolipop and i installed LOS on the phone without updating to Marshmellow (my bad :l), im running this baseband version: G900MUBU1BOE2 (wich was released in 2015), i have tried to find the "latest" version of the baseband but that seems to be the latest one for my particular device (the Dominican Republic S5) was released in 2015 , and i don't know if istalling another more update version of the baseband of other country, will introduce problems with the carriers from my country (The Dominican republic) , i have a backup of the stock touchwiz rom , but apparently i can't install the OTA because i have TWRP 3.1.1 installed and since it replaced the stock recovery, the OTA is no longer possible to install, i would greatly appreacite any help regarding this situation :/
Click to expand...
Click to collapse
I couldn't find firmware for Dominican Republic but it looks like Ecuador shares the same firmware as you so try the below
https://www.sammobile.com/firmwares/galaxy-s5/SM-G900M/EBE/download/G900MUBS1CQD5/166984/
Or this one from Columbia
https://samsung-firmware.org/download/Galaxy__S5__/58l3/COB/G900MUBS1CQD5/G900MCOB1CPI1/
Place in AP section of odin
Once flashed go into recovery mode and perform a data wipe/factory reset
Also update your twrp version if you want to flash later custom roms
thanks!!
i have a few more questions:
1-)wich version of TWRP do you recomend for lineage 15.1? i heard some people having problems with the latest version
2-) if one day i want to revert to stock how do i aproach this? since my backup is from lolipop , and i dont think that the new firmware will play nice with that (in case i plan to sell the device or something)
3-) do you now if the latest magisk version works well with lineage 15.1?
THEwed123wet said:
hi, i have a s5 (klte) SM-G900M the device is from the carrier claro from the Dominican Republic......
Click to expand...
Click to collapse
So you want to update your Baseband Modem to the latest version before updating your LineageOS Firmware to 15.1.
The following link has the latest one for your device that's provided by haggertk. haggertk is one of the Official Lineage Team members.
https://androidfilehost.com/?fid=746010030569966172
Download the file on your PC, place your device in Download Mode (aka Odin Mode), then connect your device to your PC via USB Cable, Open Odin and place the downloaded file in your AP (or PDA) spot in Odin (nothing further) and start the flashing process.
It's fairly quick to accomplish, you won't loose anything on your device and, afterwards, you should be good to go for Updating to the LineageOS 15.1.
Just an FYI... The following is the Official LineageOS 15.1 thread that's specific to the klte devices for support and guidance.
https://forum.xda-developers.com/showthread.php?t=3830497
I wish you the best of luck and enjoy LineageOS 15.1!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.
THEwed123wet said:
thanks!!
i have a few more questions:
1-)wich version of TWRP do you recomend for lineage 15.1? i heard some people having problems with the latest version
2-) if one day i want to revert to stock how do i aproach this? since my backup is from lolipop , and i dont think that the new firmware will play nice with that (in case i plan to sell the device or something)
3-) do you now if the latest magisk version works well with lineage 15.1?
Click to expand...
Click to collapse
1 - latest version of twrp - nothing wrong with it
2 - just flash stock firmware via odin
3 - latest version of magisk works fine with lineageos 15.1
THEwed123wet said:
1-)wich version of TWRP do you recomend for lineage 15.1? i heard some people having problems with the latest version.
Click to expand...
Click to collapse
This is a tricky question. The issues experienced are not all for the same variant. For example, some of the issues are for G900F but, my G900V hasn't experienced any issues.
Just keep in mind that if you experience any issues, you can always Downgrade it without a problem.
2-) if one day i want to revert to stock how do i aproach this? since my backup is from lolipop , and i dont think that the new firmware will play nice with that (in case i plan to sell the device or something)
Click to expand...
Click to collapse
Reverting to stock is not difficult because you just need the Stock Firmware and, possibly, the pit file (that's also available on the SamMobile forum and androidfilehost as well).
3-) do you now if the latest magisk version works well with lineage 15.1?
Click to expand...
Click to collapse
This is best asked on the following Official General Q&A Magisk thread.
https://forum.xda-developers.com/showthread.php?t=3432382
I wish you the best of luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.
Thanks a lot for the help!! ,i like your detailed asnwers , will be updating after the new build comes out since last one failed to build
THEwed123wet said:
Thanks a lot for the help!! ,i like your detailed asnwers , will be updating after the new build comes out since last one failed to build
Click to expand...
Click to collapse
There's been 4 Official LineageOS 15.1 builds that's been released so far but, Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.