I entered the factory mode, and something weird appeared...
If I rebooted it into normal mode, I can't charge my phone(Absolutely, the usb can't do anything)...
If I shut down my phone or enter the factory mode, I can charge my phone.
I wiped and flash the stock, but it can't solve the problem..
How can I return to the state before I entered the factory mode?
Help!
Factory mode?
kadopt said:
Factory mode?
Click to expand...
Click to collapse
He means to say bootloader mode kindoff i guess...
Well, fastboot the entire rom into your device. Should fix your issue.
This doesn't even make sense... just entering fastboot mode won't change anything, unless the OP did something... perhaps if we had more information, it seems the OP has more knowledge of what's going on then it appears since they know how to wipe and flash stock. :/
Fastboot oem config help youll see options for chare mode off/on.
Related
I have a phone I am fixing for a friend, so I don't have a complete accurate history of what happened, so please bare with me.
Basically, you put the battery in and it boots right to download mode (Factory Mode), no power button required. I can then reboot it using the power, hold down the Vol-Down button and then I am prompted if I want to enter D/L mode, in which you can use Vol-Down to cancel and it boots like normal.
I have tried the following, nothing fixes it!
Factory Wipe
Root using CF-Auto Root
Every Key Combination Possible on Boot
Odin Stock Install
Kies Upgrade (just stalls on that)
It was not rooted when I got it, and now it is. I haven't installed any recovery yet, but am willing too. It has possible water damage, so it ain't going back to the store anytime soon. I can't even get USB Debugging to appear that it is connected, nor will ADB recognize it. But the USB is working and read/writing.
This isn't my first time working with this sort of stuff, I am just at my wits end, plus I'm a Sony/HTC/LG person, so if there is something I am missing with this wonderful(ly crappy) bootloader, let me know.
Thanks in advance!
shroomun said:
I have a phone I am fixing for a friend, so I don't have a complete accurate history of what happened, so please bare with me.
Basically, you put the battery in and it boots right to download mode (Factory Mode), no power button required. I can then reboot it using the power, hold down the Vol-Down button and then I am prompted if I want to enter D/L mode, in which you can use Vol-Down to cancel and it boots like normal.
I have tried the following, nothing fixes it!
Factory Wipe
Root using CF-Auto Root
Every Key Combination Possible on Boot
Odin Stock Install
Kies Upgrade (just stalls on that)
It was not rooted when I got it, and now it is. I haven't installed any recovery yet, but am willing too. It has possible water damage, so it ain't going back to the store anytime soon. I can't even get USB Debugging to appear that it is connected, nor will ADB recognize it. But the USB is working and read/writing.
This isn't my first time working with this sort of stuff, I am just at my wits end, plus I'm a Sony/HTC/LG person, so if there is something I am missing with this wonderful(ly crappy) bootloader, let me know.
Thanks in advance!
Click to expand...
Click to collapse
If you can hold the vol-down and home button when you boot it up and get into Odin mode you should be about to flash the stock MD5 for your phone. Stock Canadian Odin files here:
http://forum.xda-developers.com/showthread.php?t=2269304
Also make sure to use the lastest version of Odin, 3.07 I believe. After you are done flashing with Odin you will have to boot into Recovery (vol-up when booting) and do a factory reset. This has always fixed any boot problems with my phone.
Jdiesel87 said:
If you can hold the vol-down and home button when you boot it up and get into Odin mode you should be about to flash the stock MD5 for your phone. Stock Canadian Odin files here:
http://forum.xda-developers.com/showthread.php?t=2269304
Also make sure to use the lastest version of Odin, 3.07 I believe. After you are done flashing with Odin you will have to boot into Recovery (vol-up when booting) and do a factory reset. This has always fixed any boot problems with my phone.
Click to expand...
Click to collapse
So did you go into settings, more, developer mode to check usb/debug?
USB debugging isn't required to flash the Odin MD5. One thing I did notice is that you should boot into Odin download mode before connecting your USB cable. I was having issues with Odin not detecting my phone and waiting to connect the USB cable solved that.
Sent from my Nexus 7 using xda app-developers app
sloanster said:
So did you go into settings, more, developer mode to check usb/debug?
Click to expand...
Click to collapse
Duh...
I was referring going to adb fastboot
see the thing is that flashing did work fine, it just didn't fix the problem. I guess in Samsung terms I am stuck in Odin download mode when turning the phone on. This is why I wanted to see of I could push some standard reboot command via adb to see of it would "jig" it into place, but no matter what I try it always boots into download mode first.
and yes, I did turn on usb debugging
shroomun said:
see the thing is that flashing did work fine, it just didn't fix the problem. I guess in Samsung terms I am stuck in Odin download mode when turning the phone on. This is why I wanted to see of I could push some standard reboot command via adb to see of it would "jig" it into place, but no matter what I try it always boots into download mode first.
and yes, I did turn on usb debugging
Click to expand...
Click to collapse
Could you have bent pins maybe where you plug it in? Its doing exactly what a jig would do..
TheAxman said:
Could you have bent pins maybe where you plug it in? Its doing exactly what a jig would do..
Click to expand...
Click to collapse
Nothing is wrong with the pins, USB is working fine and can be used in any other mode. I got ADB finally, I guess it was just not playing nice with me before. However, still anything I try the bloody thing still insists on booting first into download mode.
Just an update, it is still booting into download mode, tried a couple different stocks and still no good result. Anyone suggest any of the options in Odin might help work? Like F Reset Time or Phone EFS Clear?
shroomun said:
Just an update, it is still booting into download mode, tried a couple different stocks and still no good result. Anyone suggest any of the options in Odin might help work? Like F Reset Time or Phone EFS Clear?
Click to expand...
Click to collapse
I have seen this elsewhere, one guy suggested, using Keis, and it took him 2-3 times to get the stock to stick.
As far as checking those items in odin, could brick the phone. he also said, he got nowhere using odin in this situation.
Have you tried maybe flashing a recovery via odin? could be the recovery is corrupt.
what does this mean: in which you can use Vol-Down to cancel and it boots like normal. <<< Can you boot to the OS?
I can imagine your frustration here...good luck.
I did try Kies and it would keep getting stuck at 10% (I let it sit overnight) so I had no luck with that...
Have you tried maybe flashing a recovery via odin? could be the recovery is corrupt.
what does this mean: in which you can use Vol-Down to cancel and it boots like normal. <<< Can you boot to the OS?
Click to expand...
Click to collapse
Yes, I have gone from stock recovery to CMW and back to Stock and still nothing. As for you other question, yes, I can boot into Android. The downside is I can't turn the phone off unless the battery is pulled out. This is why I bought an HTC One and not an S4 lol .. thank god this isn't my phone, but it is frustrating because of all the things I've tried to do to fix it.
i recently tried to edit my build.prop file on my LG G2 (LS980). i changed
Code:
ro.build.product=G2
to
Code:
ro.build.product=g2
(using root explorer, and mounted r/w) because i read that they should be lower case, and since my phone wouldn't update i decided to see if it would work. rebooted and got the error. the error is so bad that i cant even use my phone. the front touch buttons are missing and i cant tap anything except for the power off/reeboot/enter airplane mode. Also, 9 times out of 10 when i power off, the sprint spark logo appears then screen goes black, then reappears and turns the phone back on. furthermore, when i plug it in to my pc i cannot change it from MTP mode, and im not sure if i still have usb debugging checked. the lg mobile support tool wont recognize that a device is connected even with the latest drivers. ALSO, i cannot enter stock recovery! last night when i first got the error i entered it once, but i decided to look for other options as to how to fix the error rather than wiping. but now I WISH i wiped my phone then, because no matter what i do now, the phone wont go into recovery mode. i don't have TWRP or CWM, and i am rooted. I'm a noob and i don't know what to do at this point, can anyone help me?
i have tred looking for some sort of software that can let me access the phones settings directly through usb, but no luck. i dont even know if such a thing exists.
can you battle your way to settings/apps? hit options, reset defaults
otherwise you may have to boot into download mode and flash complete tot/kdz
meangreenie said:
can you battle your way to settings/apps? hit options, reset defaults
otherwise you may have to boot into download mode and flash complete tot/kdz
Click to expand...
Click to collapse
Nope, all i can do is press okay on the error message. i try to swipe, tap, everything. nothing. and it doesn't let me boot to download mode..
[EDIT] i can enter download mode, im in it now. should i just run KDZ or what do i have to do in order to make this work?
you need to download the correct rom for your phone and flash using this... http://forum.xda-developers.com/showthread.php?t=2797190
Same happened to meee!!!
What can i do??
I shattered the screen of my 2015 X pure.
I am sending it back to Motorola for screen replacement.
I want to factory reset, but the screen is not responsive. I can see the screen.. well the lock screen, as touching anywhere on the screen does nothing.
i have tried to hold power button 10 seconds to turn off... from there i can hold power and down volume until enter bootloader mode.. or whatever that is.... I cannot see anyway to factory reset from there either!!
It is bad enough that i cannot get the files off the phone because, thanks to Marshmellow, you can no longer just hook up to computer and have it open a folder.. it goes in in a different mode now, and you have to change it on hte phone.... which i can't do... lucky me.. .isn't progress great?
Anyway, if someone can help me, it'd be appreciated.
thanks.
TWRP custom recovery enables adb and mtp without any touches, so you could recover your files via usb if you have TWRP. Was your bootloader unlocked? It has to be to run TWRP, and you have to enable a setting with the touchscreen to allow bootloader unlocking. If your bootloader is unlocked and you have, or are willing to install TWRP then I think you can get at your files. If your bootloader is locked I think your stuck.
Fastboot will work to factory reset with no touchscreen if you must. While in that bootloader mode plug it into a PC and use the following commands:
Code:
fastboot erase userdata
fastboot erase cache
Pretty much same thing as a factory reset, no touchscreen required. Now those lenovo techs won't be able to check out all your funny cat pictures.
Don't have a working fastboot/adb PC? Check out Heisenberg's guide for how to set that up.
Wife's phone got stuck in a bootloop last night, just stayed on the moto logo. Tried wiping cache and then data from recovery. phone now boots to moto then a black screen. I can see the device in fastboot, but not in recovery. I want to unlock the phone so that I can reflash the OS either from a custom recovery or from fastboot, but since I cant fully boot, I cant get to the developer options. This phone has never been unlocked/rooted or anything.
Is there a way to unlock the bootloader without going into the developer options and enabling it?
rokenford said:
Wife's phone got stuck in a bootloop last night, just stayed on the moto logo. Tried wiping cache and then data from recovery. phone now boots to moto then a black screen. I can see the device in fastboot, but not in recovery. I want to unlock the phone so that I can reflash the OS either from a custom recovery or from fastboot, but since I cant fully boot, I cant get to the developer options. This phone has never been unlocked/rooted or anything.
Is there a way to unlock the bootloader without going into the developer options and enabling it?
Click to expand...
Click to collapse
No there is no way to unlock bootloader without allowing OEM unlock, you're gonna wanna flash the latest version of stock available for your phone. Unfortunately I'm not very familiar with the commands so maybe another user can chime in here!
rokenford said:
Is there a way to unlock the bootloader without going into the developer options and enabling it?
Click to expand...
Click to collapse
You cannot unlock BL without "allow oem unlock" enabled.
Usb debugging you can't enable with fastboot.
You can try to erase with commands:
fastboot erase userdata
fastboot erase cache
fastboot erase customize
fastboot reboot
Give it some time.
How long are you waiting for it to boot after a factory reset? This can take 30 minutes... sometimes more.
acejavelin said:
How long are you waiting for it to boot after a factory reset? This can take 30 minutes... sometimes more.
Click to expand...
Click to collapse
I've waited at least 20 mins (not really timing it.) but with the black screen (screen on, not displaying anything) after the boot screen, how can I be sure its actually doing anything?
Honestly... Locked and stock there isn't much you can do. If we had the latest firmware image, maybe, but we are a release behind with no way knowing when, or if, we will ever get the current one.
There are two likely cases here for the cause of this problem... Actually, the cause is corruption of data on the internal emmc chip, the reason behind that corruption is the issue. It is either a faulty emmc chip or a fluke from cosmic radiation, static electricity, or who knows what. Either way, there since a factory reset isn't fixing it and we don't have a current firmware image your only option is send it in to Moto or replace it.
hi guys,
so the nexus 6p i had got the oreo ota update and after a couple of day it restarted and since then stuck on google logo(bootloop).
it only goes to fastboot mode,
download mode is disabled,
recovery is not there of any kind, meaning i cant boot to recovery mode.
every things gone on it can i do something to get it back, oem unlocking was not turned on in it. developer option was never turned on. bootloader is also locked.
i am in a big trouble guys please help me if there is a way.
alijaved154 said:
hi guys,
so the nexus 6p i had got the oreo ota update and after a couple of day it restarted and since then stuck on google logo(bootloop).
it only goes to fastboot mode,
download mode is disabled,
recovery is not there of any kind, meaning i cant boot to recovery mode.
every things gone on it can i do something to get it back, oem unlocking was not turned on in it. developer option was never turned on. bootloader is also locked.
i am in a big trouble guys please help me if there is a way.
Click to expand...
Click to collapse
Tried factory reset and reboot?
tropical cactus said:
Tried factory reset and reboot?
Click to expand...
Click to collapse
as i mentioned there is no recovery mode on it. its red and i cant boot to it. it returns back to fast boot mode dude
alijaved154 said:
as i mentioned there is no recovery mode on it. its red and i cant boot to it. it returns back to fast boot mode dude
Click to expand...
Click to collapse
You can select factory reset by pressing the volume button . Factory reset will come up. Select by pressing power button and press again to wipe.
tropical cactus said:
You can select factory reset by pressing the volume button . Factory reset will come up. Select and wipe.
Click to expand...
Click to collapse
in fastboot only the options are:
start
barcodes
recovery
bootloader
alijaved154 said:
in fastboot only the options are:
start
barcodes
recovery
bootloader
Click to expand...
Click to collapse
I have factory reset as an option. Not sure why you don't.
tropical cactus said:
I have factory reset as an option. Not sure why you don't.
Click to expand...
Click to collapse
in fastboot? i dont have it i dont know what hapoened to it
alijaved154 said:
in fastboot? i dont have it i dont know what hapoened to it
Click to expand...
Click to collapse
Try reboot bootloader and scroll through options again.
tropical cactus said:
Try reboot bootloader and scroll through options again.
Click to expand...
Click to collapse
comes back to the same screen but will still try today
alijaved154 said:
comes back to the same screen but will still try today
Click to expand...
Click to collapse
Very strange, unless it only shows up if you enable developer options before.
Same problem after update
Exactly same problem after update, no way to factory reset phone, developer option was unlocked
Erroras said:
Exactly same problem after update, no way to factory reset phone, developer option was unlocked
Click to expand...
Click to collapse
you are not alone...?
Same issue on one I have my hands on. This could get interesting.
From fastboot can anything be pushed/flashed like a previous actually functional firmware? Is there other specific software to do so? Only got my hands on the defective non functional device today but I'm planning and scheming a fix if possible.
One thing is really interesting. Why only after this update???? Why not after update from 6 to 7 then 7 to 7.1 and after 7.1 to 8.0. I think Google or Huawei is cheating us and forcing us to buy Google pixel.
I also have this issue (I'm using a nexus 5x, but this thread is the closest to my issue I've found), but it came incrementally. First, I started getting reboots every 20m or so, while doing normal phone things (reading, mostly). Then it started getting into bootloops that were 2-3 boots long, and would then work normally for the 20m mentioned above. I tried a factory reset, but it just got worse, and now either reboots on the Google logo or during the Android animation. My fastboot menu only has the regular "Start" as green. The only other options are Restart Bootloader, in red, and Recovery mode, also in red. Power off is there, obviously, but that's it. It started happening yesterday, and worsened to its current point within only a few hours.
Well. I have just joined the club. What is going on with that?
Happened to me today and I was using the latest build of SuperXE 6P.
Guys! lol
1. Dev options in ROM is same old. Settings/about and tap build 10 times to see count down to developer. Back to settings. In there for OEM unlock
2. Factory reset can be done any number of ways.
a. In ROM. Settings/backup and reset/factory reset.
b. From anywhere, hold power+volume down until you see the bootloader. There are 2 possible screens in there. One of them has factory reset. Beware! From here it will likely wipe your sdcard!
c. From recovery. You can get there from bootloader. You can also flash an up to date recovery image from bootloader.
The rest of your recovery process should be provided by the ROM thread by which you will get your choice of ROM.
Make sure you have access to a PC with adb. You will likely need to flash a vendor image
My device is only recognized in fastboot mode. No ADB, no recovery. Tried to uninstall and manually install latest USB drivers, it didn't work. My Nexus is now just stucked in a bootloop. I even tried to flash factory images to no avail. Really don't know what to do...
FYI I have no screen in bootloader allowing me to factory reset: only Start/Reboot/Reboot bootloader/Barcodes, as others stated above.