Related
********NOTE*********
i have included a few of the tools you will need as attachments to this post. I will not take any credit for these programs as i was not the developer for them... these people work too hard to have anyone steal their credit... please give credit where credit is due!Your nv_data.bin file and its matching nv_data.bin.md5 files are located on your phone in /efs/
All references that i make to "sd card" or "/sdcard/" refer to your phone's internal SD Card, not an external SD card that you may have installed.
I have created a windows batch file that you can run and it will extract your entire /efs/ folder from your phone to your PC. I am currently working on the batch script to move the edited nv_data.bin files back to your/efs/ folder and do the other adb stuff.
attached is the EFS Extractor.zip file that contains the ADB files and the batch script.
The product code for your AT&T Captivate is: SGH-I897ZKAATT
WARNING… I AM NOT RESPONSIBLE IF YOU BREAK YOUR PHONE FOLLOWING ANY OF THESE INSTRUCTIONS
The Attached EFS Extractor.zip file contains the necessary adb file and a couple batch files. "retrieve efs.bat" copies your entire /efs/ folder to your PC in a folder called /efs_bkup/ in the directory where you unzipped the file and ran the batch program from. The file "update nv_data.bat" takes your edited nv_data.bin file from the root directory where you ran the .bat file from and places in in your phone's /efs/ folder and removes the old copies from your phone... when it is done, it will power cycle your phone.
To fix your nv_data.bin, you will have to have access to the following tools:
A hex editor (search google for hex editors, they have tons of them that are free… I use one called HexEdit and i have it attached)
GalaxyS_One-Click_Root_All_Models (available via XDA-Developers... attached)
ADB (Android Debugging Bridge) This is available by getting the Android SDK at the Android Developers Website (http://developer.android.com/sdk/index.html) or if you downloaded the Galaxy S One Click Root, it is in the directory where you unzipped the files.
BusyBox – Search the google market for “BusyBox”. It will appear and will be the free one from stericson (i have included the .apk as an attachement)
Odin One-Click Downloader (available from XDA)… make sure you get the correct one. There are 2 versions. If you batch number is 1008 then you need the one with the 3-button fix, if you batch number is greater than 1008 then you should need the regular one. Your batch number is written on the sticker on your phone under your battery on the left side right under the words “S/N” where your serial number is listed.
Samsung Kies Mini (gotten from Samsung website)
Download the attached EFS Extractor .zip file. It contains everything you need to copy your /efs/ folder to your PC
Now for what you need to do to get your phone’s nv_data.bin back to normal:
Flash back to stock and then do a master clear using Odin One Click
put phone into USB debugging mode and also check the setting to "stay awake"
connect phone to PC and root and install busybox
extract the attached EFS Extractor.zip file and run the "retrieve efs.bat" file. This will copy your entire /efs/ folder from your phone to your PC in a direcotry called ./efs_bkup/
Using the Hex Editor, edit the file ./efs_bkup/efs/nv_data.bin on your PC to have the correct product code SGH-I897ZKAATT. do an ASCII search for "SGH" to locate the line in the file that contains your product key. then save the edited file to ./nv_data.bin (the root directory where you extracted your ZIP file to on your PC)
run the file "update nv_data.bat" to copy your corrected nv_data.bin to your phone's efs folder and chown it and reboot your phone
change USB Settings on phone back to Kies then open Kies Mini and connect phone.
you should now be able to connect to Kies Mini and not have unregistered device... now would be a good time to back_up your /EFS/ folder... you can now either do Odin One-Click and a master clear, or flash a different rom. You should do Odin if you want to use Kies to get updates to be 100% stock to remove your root and busybox.
The general overview what what you need to do is this for those of you that want to know and/or use other tools to do this
Copy your /efs/nv_data.bin file from your phone to your PC
Use a hexeditor to modify the line in the nv_data.bin file that contains the productcode to contain your correct product code
delete any nv_data.* files from your /efs/ folder on your phone
copy the corrected nv_data.bin file from your PC to your /efs/ folder on your phone
busybox chown 1001:1001 /efs/nv_data.bin
reboot phone
Done!
Now, when you backup your /efs/ folder to your PC you may see files like nv_data.bak and nv_data.bak.md5. Using a hexeditor, open the nv_data.bak file and look at the line that has the product code (ASCII values starting wtih SGH)... if the product code in the .bak file is correct, then delete the nv_data.bin and nv_data.bin.md5 from your /efs/ folder on your phone and reboot your phone. Your phone should then create new .bin and .bin.md5 files from the .bak and .bak.md5 files that will have the proper productcode. You can also optionally rename the .bak and .bak.md5 files on your PC to be .bin and .bin.md5 and copy them to your /efs/ folder on your phone.
You can view what Kies is reading your productcode as by opening your windows registry editor Start>Run>regedit[enter]
Connect phone to PC in Kies(Firmware) mode
Navigate to HKEY_CURRENT_USER/Software/Samsung/KiesMini/FUS
Look at the key "PRODUCTKEY" and what it's value is... if it is correct, then you are good. If not, then something went wrong somewhere.
If you have issues please post the issues you are having and I will update as necessary.
Here is a link to a different thread that contains a program and instructions for restoring your unlock codes if that is what you are trying to do. The .jar (java program is written in frech, but it only asks for the codes you want to use for your unlock codes... i did not make this program so I cannot help you with it.
http://forum.xda-developers.com/showpost.php?p=8983897&postcount=103
Tried to trim this down a little as there are a ton of steps, let me know if any of this is incorrect.
1. Flash back to stock rom, and do a master clear using the Odin3 One-Click Downloader by designgears
2. Root using one-click-root and install busybox, turn on usb development mode + stay awake, and connect to your PC.
3. Open a command prompt window and navigate to the directory where you extracted the one-click-root. Run the following commands:
a. adb shell
b. su
c. cp /efs/nv_data.bin /sdcard/nv_data.bin
d. cp /efs/nv_data.bin /sdcard/nv_data.bin.copy (incase there is a problem)
e. rm /efs/nv_data.*
4. Exit your adb.exe window, mount your phone on your PC and navigate to the internal card. Edit the nv_data.bin with a hexeditor (bpsoft.com) and search (ascii) for "SGH-" (without the quotes)
5. It may be something like SGH-I897ZKATOR or SGH-I897ZKATMB. You need to change this to SGH-I897ZKAATT then save the file, and unmount your phone.
6. Disconnect usb data cable from pc to phone, re-enable usb development mode + stay awake, reconnect.
7. Open a command prompt window and navigate to the directory where you extracted the one-click-root. Run the following commands:
a. adb shell
b. su
c. cp /sdcard/nv_data.bin /efs/nv_data.bin
d. busybox chown 1001:1001 /efs/nv_data.bin
8. Power cycle
Hi hansomni. l've been down this road. Were you successfull with creating Nv_data.bak this way and restoring with that. For example editing nv_data.bak and making a corresponding md5 file and only placing those files in your efs folder and restarting your phone
I had problems creating this file. i would always get an incorrect iemi. This is why i recommend using nv_data repair.zip posted in the tmo vibrant unlock thread not only can you recreate the correct product code but also fix the fffffffff for unlock code.
Have you checked this outhttp://forum.xda-developers.com/showpost.php?p=8983897&postcount=103
mattbeau said:
Hi hansomni. l've been down this road. Were you successfull with creating Nv_data.bak this way and restoring with that. For example editing nv_data.bak and making a corresponding md5 file and only placing those files in your efs folder and restarting your phone
I had problems creating this file. i would always get an incorrect iemi. This is why i recommend using nv_data repair.zip posted in the tmo vibrant unlock thread not only can you recreate the correct product code but also fix the fffffffff for unlock code.
Have you checked this outhttp://forum.xda-developers.com/showpost.php?p=8983897&postcount=103
Click to expand...
Click to collapse
yeah... i have been successful using the steps i outlined... like i said in the original post, this is only to get your product code fixed... i don;t have an unlocked phone so i don't know if that program works... i did use it to check it out, but it is written in frech or something and it never copied the "patched" nv_data files back to my phone... i had to do it manually and still the product code from the created files were wrong. Others say that they have had success using it, but i never did. I took a buch of stuff from a buch of posts on this site to compile the guide here for restoring product codes only.
the .bak files are your backup files that get generated sometimes... usually those files have your correct unlock codes and productcode... to restore them, just delete the non .bak files and remove the .bak extension from the backups... then copy them to your /efs/ folder and powercycle and you should be good. you should keep all your orignial files from your /efs/ folder in a safe place though so you have them to fall back on if you need to. I have never had the .bak files in my /efs/ folder so i haven't ever been that lucky.
devz3r0 said:
Tried to trim this down a little as there are a ton of steps, let me know if any of this is incorrect.
1. Flash back to stock rom, and do a master clear using the Odin3 One-Click Downloader by designgears
2. Root using one-click-root and install busybox, turn on usb development mode + stay awake, and connect to your PC.
3. Open a command prompt window and navigate to the directory where you extracted the one-click-root. Run the following commands:
a. adb shell
b. su
c. cp /efs/nv_data.bin /sdcard/nv_data.bin
d. cp /efs/nv_data.bin /sdcard/nv_data.bin.copy (incase there is a problem)
e. rm /efs/nv_data.*
4. Exit your adb.exe window, mount your phone on your PC and navigate to the internal card. Edit the nv_data.bin with a hexeditor (bpsoft.com) and search (ascii) for "SGH-" (without the quotes)
5. It may be something like SGH-I897ZKATOR or SGH-I897ZKATMB. You need to change this to SGH-I897ZKAATT then save the file, and unmount your phone.
6. Disconnect usb data cable from pc to phone, re-enable usb development mode + stay awake, reconnect.
7. Open a command prompt window and navigate to the directory where you extracted the one-click-root. Run the following commands:
a. adb shell
b. su
c. cp /sdcard/nv_data.bin /efs/nv_data.bin
d. busybox chown 1001:1001 /efs/nv_data.bin
8. Power cycle
Click to expand...
Click to collapse
Yeah, looking at it quickly it looks like all the instructions are correct... maybe abbreviated too much... Thanks for that... i will update with instuctions similar.... i have to remember that there are those folks that have never used adb or know what it is. I will credit you in my update tomorrow. I am used to where i work we have people that use computers that don;t know how to power them on and off so they just leave them on all the time... i have to be very specific on my instructions that i tell them so they can understand... a two second task becomes an all-day event. Just something i am used to doing.
I will be working on a dos script (.bat) file that will do most of the adb stuff so then the users only need a few things to do and just let the scripts take care of the rest.
hansonmi said:
yeah... i have been successful using the steps i outlined... like i said in the original post, this is only to get your product code fixed... i don;t have an unlocked phone so i don't know if that program works... i did use it to check it out, but it is written in frech or something and it never copied the "patched" nv_data files back to my phone... i had to do it manually and still the product code from the created files were wrong. Others say that they have had success using it, but i never did. I took a buch of stuff from a buch of posts on this site to compile the guide here for restoring product codes only.
the .bak files are your backup files that get greated sometimes... usually those files have your correct unlock codes and productcode... to restore them, just delete the non .bak files and remove the .bak extension from the backups... then copy them to your /efs/ folder and powercycle and you should be good. you should keep all your orignial files from your /efs/ folder in a safe place though so you have them to fall back on if you need to.
Click to expand...
Click to collapse
You dont even need to change the extenaion of those files if you power cycle your phone with just .Bak files. Your phone will recreate the nv_data.bin and md5 from those .Bak files and create a log file
Yeah i know the java program is in french. But its only asking you what two codes you want to use for unlocking your phone ( ahh google translate)
And yes the first time i tried the program i had trouble too. I think it helps if you have a good busybox version.
Believe me the easier you can make it the better it will be for everyone. Now if we could just get everyone to back up that folder before flashing anything we wouldnt even need to go down that road. Thanks for your help in this. Ill leave this thread alone now sorry if im intruding. Pm me if you need any help
mattbeau said:
You dont even need to change the extenaion of those files if you power cycle your phone with just .Bak files. Your phone will recreate the nv_data.bin and md5 from those .Bak files and create a log file
Yeah i know the java program is in french. But its only asking you what two codes you want to use for unlocking your phone ( ahh google translate)
And yes the first time i tried the program i had trouble too. I think it helps if you have a good busybox version.
Believe me the easier you can make it the better it will be for everyone. Now if we could just get everyone to back up that folder before flashing anything we wouldnt even need to go down that road. Thanks for your help in this. Ill leave this thread alone now sorry if im intruding. Pm me if you need any help
Click to expand...
Click to collapse
Yeah... the problem is that not everyone knew to do it before flashing as a lot of the ROM pages don't say it (I was one of them that never knew about it)... i knew what the java was saying but since i don't have an unlocked phone, i had no way of testing it to see if it worked for me or not... and on top of that it didn't work with restoring my productcode (i know that becuase i couldn't use Kies until i did things manually)... I tell people to rename the files, becuse i am assuming they copy the contents of their /efs/ folder to a PC or something... then they just have to delete the nv_data files from /efs/ on their phone, and rename the .bak files on their PC and copy them back to their phone's /efs/ so they still have a copy of their original files saved on their PC... plus i don't like relying on the phone doing the renaming because if it doesn't no one will know what went wrong...
Working on Windows Batch (.bat) script
I will be working on doing a windows .bat script that will do most of the dirty work for you... it may take a couple days because where i work the end of the year is the busiest time for me and i don't have a lot of time between work during the week.
I will make the script an attachment and will hopefully be able to zip with the abd files to make life a little easier for everyone.
Thanks for the input everyone.
What line
Could someone that has successfully done this post what line in the hex file the product code is found on. All I get is string not found??? Thanks
Worked great, followed steps exactly as outlined didn't have any problems. Thanks again for this, I've been wanting to have a proper backup of efs folder with correct product code, but could never change it back.
Slowazz28 said:
Could someone that has successfully done this post what line in the hex file the product code is found on. All I get is string not found??? Thanks
Click to expand...
Click to collapse
I used hexedit, and if the line number is in first column it begins on line 188010. I did notice when searching a second time to get line number, that I had to have sgh- in all caps, and once i got string not found, I closed program reopened and searched again using caps (SGH-) it worked several times. Hopes this helps.
Big thanks for posting this.
I'll give this a shot prior to flashing Axura 2.5.
Thanks hansonmi! I got it updated with kies. I done it a lil diffent using root explorer to move files around and used hexeditor to edit files and root explorer to copy back.
great guide.
wish this would have been around the first time i ran into this problem as it was a headache when it happened and the threads and advice on fixing were so fragmented within the forum threads.
The only thing i did differently was that i didn't use ADB on a pc at all during the process (I completed the process using both Root Explorer and Terminal Emulator on my phone and copying files to pc via mounting the phone and its storage as disk drives).
(PS before doing any of this i backup up my efs folder first to my external SD using root explorer and then to my pc via mounting the phones storage)
1. I had already copied my nv_data.bin file to external SD when backing up EFS folder.
2. Connected to pc via usb and mounted for storage (with debugging on)
3. copid nv_data to pc
4. used PsPad to edit the nv_data file in accordance with previous instruction in this thread. (I highly recommend PSpad as a hex editor. Its nice that you can switch back and forth between hex and text editor views) See PS in the end for using PSpad hex editor to find the line you need to edit. That seemed to be the only thing that needed clarified.
5. copy nv_data.bin back to the root directory of external sd
6. use root explorer to move newly edited nv_data from external sd back to original EFS folder.
7. Delete the nv_data..bin.md5 file..i left the backup from efs folder
7. delete any nv_data.baks from efs folder
8. Now the use of Termainl Emulator (download from market). Busybox must be installed as well
9. Open terminal emulator execute following commands:
SU
busybox chown 1001:1001 /efs/nv_data.bin
reboot
(reference to step 4 using hex editor)
PS - These are the steps for editing the hex code and starting with step first step assuming you have copied the nv_data.bin to your PC
1. Open PsPad (or other hex editor)
2. Open nv_data.bin in hex editor mode
3. Go to line 188000 (using search modes you will likely have to enter $00188000 or 00188000) Using PsPad you would do the following:
Select SEARCH from top tool bar. Select GOTO LINE.......then enter $00188000
4. You will see yTMB....SGH_i897ZKATMB (or yTOR....SGH-ZKATOR).
5. Replace that first TMB or TOR with ATT then replace ZKATMB or ZKAATOR with KZAATT
6. Save
7. Now you should have a proper nv_data.bin
HBeezy said:
I used hexedit, and if the line number is in first column it begins on line 188010. I did notice when searching a second time to get line number, that I had to have sgh- in all caps, and once i got string not found, I closed program reopened and searched again using caps (SGH-) it worked several times. Hopes this helps.
Click to expand...
Click to collapse
Ok that worked great except when I get to that line it says productcode several times then a bunch of x's then 11 0's but no SGH- so not sure where to put it in at. The 0's start on line 1880f0 and end on line 188100 ??? Appreciate the help
Slowazz28 said:
Ok that worked great except when I get to that line it says productcode several times then a bunch of x's then 11 0's but no SGH- so not sure where to put it in at. The 0's start on line 1880f0 and end on line 188100 ??? Appreciate the help
Click to expand...
Click to collapse
what hex editor are you using?
i recommend downloading the free PSpad Hex/Txt editor.
1. Open your nv_data file using FILE then OPEN IN HEX EDIT
2. use SEARCH from toolbar commands....GOTO LINE from search menu....options after opening in hex edit mode
3. then search for $00188000
you should see the line you need to edit.
The nice thing about PSPAD is that you can also open the binary file in a Text mode. If you have trouble finding it in the hex editor mode try the following.
1. open PSpad. Goto FILE then OPEN (vs. open in hex edit). This will open in a text editor view/mode.
2. goto SEARCH and select INCREMENTAL SEARCH
3. type SGH and search
(you could also do all the hex editing without moving files to pc if you wanted using HEX EDITOR from market...though for most the PC hex editors might be easier)
if you want to use the android hex editor app to do all the editing on your phone...do the following:
THERE ARE 3 Total Lines you will need to edit:
00188008
00188010
00188020
1. Use Root Explorer to copy nv_data.bin from efs folder to the root directory on your external sd.
2. Use Hex Editor App to open the copy from your external SD.
3. One Open click the capacitive menu button and select jump to address
4. Enter 0188008
This will take you to line 00188008
5. Edit the last or 8th Block so it reads 41.
6. Enter 0188010
7. This will take you to line 00188010. Edit the first two blocks of this line. Replace the #'s so that both of the first two blocks contain 54. (look to the text at the right of screen the first two letter should have changed to TT. To recap you need to edit Block 1 and Block 2 of line 0018010:
LINE 0018010
Block 1 = 54
Block 2 = 54
(text @ right should now read TT....SG)
8. Now look down to line 0018020 and look at the line. If you at the line and to the far right text you will see ATOR or ATMB if your nv_is messed up.
9. You may need to edit blocks 2-4. They should read as follows:
LINE 00188020
Block 2 = 41
Block 3 = 54
Block 4 = 54
(the text at the right of your screen should now read AATT....)
10. Save the file and move it back to efs using root explorer.
PS: Here are how the following lines should read (the ones in bold are the only ones you have to edit as line 00188018 will already be correct):
00188008|2e|34|00|00|00|00|ff|41|.4....A
00188010|54|54|00|00|00|00|53|47|TT....SG
00188018|48|2d|49|38|39|37|5a|4b|H-I897ZK
00188020|41|41|54|54|00|00|00|00|AATT....
bames said:
what hex editor are you using?
i recommend downloading the free PSpad Hex/Txt editor.
1. Open your nv_data file using FILE then OPEN IN HEX EDIT
2. use SEARCH from toolbar commands....GOTO LINE from search menu....options after opening in hex edit mode
3. then search for $00188000
you should see the line you need to edit.
The nice thing about PSPAD is that you can also open the binary file in a Text mode. If you have trouble finding it in the hex editor mode try the following.
1. open PSpad. Goto FILE then OPEN (vs. open in hex edit). This will open in a text editor view/mode.
2. goto SEARCH and select INCREMENTAL SEARCH
3. type SGH and search
(you could also do all the hex editing without moving files to pc if you wanted using HEX EDITOR from market...though for most the PC hex editors might be easier)
if you want to use the android hex editor app to do all the editing on your phone...do the following:
THERE ARE 3 Total Lines you will need to edit:
00188008
00188010
00188020
1. Use Root Explorer to copy nv_data.bin from efs folder to the root directory on your external sd.
2. Use Hex Editor App to open the copy from your external SD.
3. One Open click the capacitative menu button and select jump to address
4. Enter 0188008
This will take you to line 00188008
5. Edit the last or 8th Block so it reads 41.
6. Enter 0188010
7. This will take you to line 00188010. Edit the first two blocks of this line. Replace the #'s so that both of the first two blocks contain 54. (look to the text at the right of screen the first two letter should have changed to TT. To recap you need to edit Block 1 and Block 2 of line 0018010:
LINE 0018010
Block 1 = 54
Block 2 = 54
(text @ right should now read AT....SG)
8. Now look down to line 0018020 and look at the line. If you at the line and to the far right text you will see ATOR or ATMB if your nv_is messed up.
9. You may need to edit blocks 2-4. They should read as follows:
LINE 00188020
Block 2 = 41
Block 3 = 54
Block 4 = 54
(the text at the right of your screen should now read AATT....)
10. Save the file and move it back to efs using root explorer.
PS: Here are how the following lines should read (the ones in bold are the only ones you have to edit as line 00188018 will already be correct):
00188008|2e|34|00|00|00|00|ff|41|.4....A
00188010|54|54|00|00|00|00|53|47|AT....SG
00188018|48|2d|49|38|39|37|5a|4b|H-I897ZK
00188020|41|41|54|54|00|00|00|00|AATT....
Click to expand...
Click to collapse
Ok, So my nv_data.bin must be fubared cause I don't even have lines 188008 or 188018. They go by 10's like 188000, 188010, 188020, ect. And the text to the right of line 188010 starts TT....SG not AT....SG
File
I didn't back this up from my first flash to a custom ROM. Stated at the beginning it says this is likely unfixable. I have run Axura, Cog and Perception Roms (not in that order). Not sure if that makes a difference. Is this still fixable? The problem I have (using new market) is apps are either
A) Installed and not showing so on the market
B) I have them installed and they disappear & have to reinstall them from the market only to have them disappear from my phone again
C) Unable to download them (such as Pocket Legends)
Any feedback is appreciated.
Thanks
Slowazz28 said:
Ok, So my nv_data.bin must be fubared cause I don't even have lines 188008 or 188018. They go by 10's like 188000, 188010, 188020, ect. And the text to the right of line 188010 starts TT....SG not AT....SG
Click to expand...
Click to collapse
my bad
the 188010 should start TT i will correct my original.
but you should be able to find lines 188008 an 18 though you wont need to do anything with 18. Did you try looking at it with the android hex editor app from market?
You won't see the 008 and 018 lines if your using a hex editor on PC you will only see the lines by by 10's.
The section you are referring to are for Using Android Hex Editor App on your phone.
-----------------------
if your using a hex editor on your PC you should see the following when corrected:
188000 | FFFF | FFFF | 5245 | 5630 | 2E34 | 0000 | 0000 | FF41 |
188010 | 5454 | 0000 | 0000 | 5347 | 482D | 4938 | 3937 | 5A4B |
188020 | 4141 | 5454 | 0000 | 0000 | 0000 | 0150 | 024E | 034E |
Slowazz28 said:
Could someone that has successfully done this post what line in the hex file the product code is found on. All I get is string not found??? Thanks
Click to expand...
Click to collapse
It really depends on the editor you are using and you have to make sure you are searching for ASCII...
in the edit that i use, it is line 188010
I followed the instructions according to mdalacu
Working great, and all i had to do was to change only 2 lines in buid.prop using ES File explorer with 2 options activated: Root Explorer and Mount File System.
1. Be sure that you have root
2. Install ES File explorer and Options and check this: Root Explorer and Mount File System
3. Navigate to /system. Long press on buid.prop , open as text.
4. Edit the file by modifying this lines:
ro.product.model=GT-N7000
ro.product.brand=samsung
into
ro.product.manufacturer=LGE
ro.product.model=VS910 4G
5. reboot
6. install from market box (box.net)
7. Create the account. A confirmation message will appear that you have 50 GB capacity.
8. Again from EFS File Explorer navigate to /system. Check that you have a file named build.prop.bak and if so, delete buid.prop. Rename build.prop.bak into build.prop. Now you can disable from options : "Root Explorer" and "Mount File System"
9. Reboot
10. Enjoy your amizing phone
Note: I had done this on KL7 with stock kernel.
Was able to create a bunch of accounts, then deleted the build.prop file and renamed the build.prop.bak back to build.prop, rebooted the phone, and I get to the Samsung Galaxy Note N7000 screen, then it goes black. I cannot boot up the device now.
Any suggestions?
yeahmon said:
4. Edit the file by modifying this lines:
ro.product.model=GT-N7000
ro.product.brand=samsung
into
ro.product.manufacturer=LGE
ro.product.model=VS910 4G
Click to expand...
Click to collapse
I don't think you are supposed to change "brand" to "manufacturer". For me, there was already a "ro.product.manufacturer" value (edit: of course, I also changed the "model" value) and I just changed that.
However, I don't see how this could have caused your problem. Are you sure you renamed the backup file "build.prop" correctly? Maybe accidentally left a symbol there, or deleted one too many?
bnapalm said:
However, I don't see how this could have caused your problem. Are you sure you renamed the backup file "build.prop" correctly? Maybe accidentally left a symbol there, or deleted one too many?
Click to expand...
Click to collapse
Sounds like OP deleted the build.prop and perhaps the rename failed and didn't notice, so now they have no build.prop file whatsoever.
--
Are you able to access the device using a cable via adb (is USB debugging enabled on your phone)?
I know nothing about rooting the Note just yet, though if it's the same setup as G1/Nexus/Desire (I guess it would be) you should be able to get into recovery then use adb at a command line to push a new build.prop file to /system which should allow your device to boot.
bnapalm said:
I don't think you are supposed to change "brand" to "manufacturer". For me, there was already a "ro.product.manufacturer" value (edit: of course, I also changed the "model" value) and I just changed that.
However, I don't see how this could have caused your problem. Are you sure you renamed the backup file "build.prop" correctly? Maybe accidentally left a symbol there, or deleted one too many?
Click to expand...
Click to collapse
It worked, and I was able to reboot back into the Note with these settings.
jayshah said:
Sounds like OP deleted the build.prop and perhaps the rename failed and didn't notice, so now they have no build.prop file whatsoever.
--
Are you able to access the device using a cable via adb (is USB debugging enabled on your phone)?
I know nothing about rooting the Note just yet, though if it's the same setup as G1/Nexus/Desire (I guess it would be) you should be able to get into recovery then use adb at a command line to push a new build.prop file to /system which should allow your device to boot.
Click to expand...
Click to collapse
I think you're right about losing the build.prop file. Fortunately, I backed it up. I am trying to access the device now. I have no GUI on the Note. I am hoping it is just a blank screen and the device is still functioning in the background. I'll be back momentarily with an answer to accessing it.
ok...I can access the Note's file system. However, when I try to copy the backup build.prop file into the system directory via Android Commander, it says I need root access to do this permission.
The Note IS rooted. I don't get it.
This appears to be a problem with Android Commander. There are threads about this same problem, but rather than the software creator place a link to his FAQ that he ridicules everyone for not reading, he lambasts them instead. Thats a real good way to get a donation.
Anybody got any other suggestions for a root file explorer, preferably for Mac, but PC will work too.
be careful, backup buid.prop and restore it after creating Box account.
amincom said:
be careful, backup buid.prop and restore it after creating Box account.
Click to expand...
Click to collapse
I am having no luck finding a way to get root access from a computer.
deleted post
user error
The tumbleweeds are big around here
There's an app for that
Without having to edit files and without root.
http://www.androidguys.com/2011/12/28/get-50gb-of-free-box-cloud-storage-without-rooting/
But is there an app to copy my file over from my computer?
amincom said:
be careful, backup buid.prop and restore it after creating Box account.
Click to expand...
Click to collapse
vcespon said:
Without having to edit files and without root.
http://www.androidguys.com/2011/12/28/get-50gb-of-free-box-cloud-storage-without-rooting/
Click to expand...
Click to collapse
Please read the OP before posting.
--
The fact that you are using Android Commander implies you have adb access, this is good.
Here's what I would do to fix your problem, it definitely isn't the only way, but it will work.
#1: Get ADB installed on your PC/Mac/Linux
#2: Open a command line and run
Code:
adb devices
as a test, you should get output that one device is connected via cable, if you don't abort here, nothing else will work
#3: run
Code:
adb remount
This will make your /system writeable
#3: I'll put this as a windows instruction because I don't know the Mac filesystem, but it's almost identical
Code:
adb push C:\build.prop /system/
This will push C:\build.prop (please put your backup copy here) into /system/ of your Note. If you're on a mac, you will need to find another place to put it, e.g. if it's /users/bob/build.prop the command just becomes
Code:
adb push /users/bob/build.prop /system/
I hope this helps
Edit: Paste a copy of output here if it doesn't work so I can help debug
I was onto this earlier but a Command line gets me this:
'adb' is not recognized as an internal or external command, operable program or batch file.
yeahmon said:
I was onto this earlier but a Command line gets me this:
'adb' is not recognized as an internal or external command, operable program or batch file.
Click to expand...
Click to collapse
You'll need to download/install adb first.
jayshah said:
You'll need to download/install adb first.
Click to expand...
Click to collapse
standby...
its taking forever to install SDK
This is a lost cause.
No matter what I do, I get the same errors. Anything I try to do to remedy the issue only opens another door to hell.
I should have stuck with Dropbox.
yeahmon said:
This is a lost cause.
No matter what I do, I get the same errors. Anything I try to do to remedy the issue only opens another door to hell.
Click to expand...
Click to collapse
You're really going to have to paste the error messages here for any of us to help you further
Alternatively, can't you just reflash your current ROM on top?
Hello all,
Using TWRP, I successfully flashed PAC-ROM to my Cricket 'jflteaio' or SGH-i337z ... I337ZTUUBND3, Galaxy S4.
A bit of helpful info for noobs: I rooted with 'towelroot' app --- Google it
And installed TWRP 2.7 from here
At this point...MAKE A BACKUP in TWRP!!! I AM NOT LIABLE FOR BRICKED DEVICES!
Now on to the real fun stuff! Follow these steps to flash Pac-Man ROM:
1. Download the GENERAL jflte rom 'zip' file and not the 'md5sum' from the PAC ROM website:
Download the zip HERE
2. Extract the zipped jflte pac rom into a new folder anywhere in Windows. In the new folder, navigate to this location:
\META-INF\com\google\android\
3. Download and install the free Windows program, NotePad++ --- Google it
4. Right-click on 'updater-script' in the folder \META-INF\com\google\android\
(IMPORTANT: Leave the 'update-binary' file alone; only modify the 'updater-script')
5. click on "Edit with NotePad++".
6. In NotePad++, Under the first word/command "assert" you will see a bunch of commands that start with 'getprop'. Find a spot where it reads '||' and make a new line directly after this. you will see many jflte codenames, so making your new line after you see 2 of the same codename and '||' will do.
7. Make sure the new line you made does not cut any commands in half and copy/paste in these lines of code:
Code:
getprop("ro.product.device") == "jflteaio" ||
getprop("ro.build.product") == "jflteaio" ||
(NOTE: This code will allow install of PAC-ROM on jflteaio)
8. Make sure to save the changes in the file. Close NotePad++.
9. Zip all the files you extracted from the original back up with 7zip or winrar... make sure the file extention is not '.7z' or '.rar'. Must be '.zip' to work. And the files you just zipped have to be in the root location of the zip file. In other words, make sure when you open your new zip, the first folder you see is 'META-INF'... for example in 7zip, you have to select all the elements(there are 5 in total...3 folders and 2 files) in the new folder you created earlier, and right-click and choose 7zip and 'add to archive'.
10. You can now flash the rom in TWRP from an sdcard by following the instructions HERE on XDA
(FINAL NOTE: By the way, make sure NOT to install the AT&T SafeStrap Kernel during the flash, as it may cause the ROM not to boot, and as always, make a TWRP BACKUP before you attempt flashing!)
I do not own any of the software in this guide. A special thanks to all the devs out there who make our lives better!
Best of skill (and luck) to you all!
raydantheman
I Replaced the build.prop on my rooted Google nexus 6p running Android 7.0 with the build.prop file from the pixel to run Google Assistant.The phone is now stuck on the Google logo during boot,PLEASE HELP.
Did you make a backup copy of the file before replacing it, are you rooted, and have TWRP installed?
If so, reboot to recovery, use TWRP Terminal function to copy the backup of the build.prop to the modified one.
dratsablive said:
Did you make a backup copy of the file before replacing it, are you rooted, and have TWRP installed?
If so, reboot to recovery, use TWRP Terminal function to copy the backup of the build.prop to the modified one.
Click to expand...
Click to collapse
I did not make a back up but I am rooted and have Twrp installed.What can i do from here?
If you can boot to bootloader you should be able to replace the file with a standard one.
Alden1227 said:
I Replaced the build.prop on my rooted Google nexus 6p running Android 7.0 with the build.prop file from the pixel to run Google Assistant.The phone is now stuck on the Google logo during boot,PLEASE HELP.
Click to expand...
Click to collapse
same here please help.....freaking out
1. The build.prop contains the settings for a specific build for a specific phone. You can't just replace it from another build, not to mention another phone. Well, I guess, you already know this.
2. You should know exactly which build you were on. Exactly. Then:
* What I would do, is download the factory image from https://developers.google.com/android/nexus/images#angler
o Extract it, extract the image-angler-...zip, and mount the system.img, find the build.prop and adb push it to the phone.
o Reboot
* But you can also ask somebody who has the exact build as you do, and ask for the build.prop. Then push it to the phone.
Either restore from backup or edit the buildprop (if possible) I guess.
You only needed to edit 2 lines in the buildprop though, why replace the whole thing?
Alden1227 said:
I did not make a back up but I am rooted and have Twrp installed.What can i do from here?
Click to expand...
Click to collapse
First thing's first. Since you didn't just edit your build.prop, but replaced it with another, try setting permissions.
Step 1: Boot to TWRP > Mount > Select "System"
Step 2: Advanced > File Manager
Step 3: Navigate to /system/build.prop
Step 4: Select "chmod" and type "644" (don't include quotation marks)
Reboot and see if it works. If the permissions weren't right and you didn't change them, you'd most likely be in a boot loop. If this doesn't work you can just flash your system.img again. It won't wipe your internal storage, data (installed apps, etc.) If you have custom host files for ad blocking, you may need to apply them again.
If that does not work;
I'm going to assume you were on stock Nougat. Download the factory image (same build you were on before) and unzip the file. You'll end up with a folder with another zip archive in it. Unzip that as well. Inside you'll find a file named "system.img"
Move that system.img file to your ADB/fastboot folder. Shift+Right Click that folder and select "Open command window here"
Hold volume down + power to boot into the bootloader. Connect the phone to the PC and in the command prompt, type "fastboot devices" (no quotes again. ) It should show your devices serial number. If it does, perfect. If not, check your ADB/fastboot installation.
Once you get fastboot to show your serial number all you need to do is type;
Code:
fastboot flash system system.img
That should do it. If you need any more help, just reply back.
Edit: @istperson, AFAIK, you cannot pick out files from a .img file like that. When I right click it on my system and choose mount it tells me the image file is corrupted. Tried downloading again and hashes match. Windows 10. I use 7zip as well, and that can't open it either. Is there another program to use or is something whacky on my end? Wouldn't doubt it. Just took a Win10 update yesterday and it's been acting up on me all day. :/
RoyJ said:
Edit: @istperson, AFAIK, you cannot pick out files from a .img file like that. When I right click it on my system and choose mount it tells me the image file is corrupted. Tried downloading again and hashes match. Windows 10. I use 7zip as well, and that can't open it either. Is there another program to use or is something whacky on my end? Wouldn't doubt it. Just took a Win10 update yesterday and it's been acting up on me all day. :/
Click to expand...
Click to collapse
It's a sparse image, you have to convert it to normal mage with simg2img. Then you can mount it normally.
istperson said:
It's a sparse image, you have to convert it to normal mage with simg2img. Then you can mount it normally.
Click to expand...
Click to collapse
Awesome, thanks!
Fixed the issue
frreak said:
same here please help.....freaking out
Click to expand...
Click to collapse
I got mine to work by flashing Android 7.0
same thing happened to me.... stuck on google even after flashing stock....
dadoc04 said:
same thing happened to me.... stuck on google even after flashing stock....
Click to expand...
Click to collapse
Flash stock boot, system and vendor img files.
Sent from my Pixel XL using XDA-Developers mobile app
Same thing happened to me at first (though I did not use the build prop from a Pixel). I just dirty flashed my ROM (Octo N) and it then got passed the Google screen and loaded with no problem. I updated my build prop manually in order to get Google Assistant to work, and it's been working great ever since.
RoyJ said:
First thing's first. Since you didn't just edit your build.prop, but replaced it with another, try setting permissions.
Step 1: Boot to TWRP > Mount > Select "System"
Step 2: Advanced > File Manager
Step 3: Navigate to /system/build.prop
Step 4: Select "chmod" and type "644" (don't include quotation marks)
Reboot and see if it works. If the permissions weren't right and you didn't change them, you'd most likely be in a boot loop. If this doesn't work you can just flash your system.img again. It won't wipe your internal storage, data (installed apps, etc.) If you have custom host files for ad blocking, you may need to apply them again.
If that does not work;
I'm going to assume you were on stock Nougat. Download the factory image (same build you were on before) and unzip the file. You'll end up with a folder with another zip archive in it. Unzip that as well. Inside you'll find a file named "system.img"
Move that system.img file to your ADB/fastboot folder. Shift+Right Click that folder and select "Open command window here"
Hold volume down + power to boot into the bootloader. Connect the phone to the PC and in the command prompt, type "fastboot devices" (no quotes again. ) It should show your devices serial number. If it does, perfect. If not, check your ADB/fastboot installation.
Once you get fastboot to show your serial number all you need to do is type;
That should do it. If you need any more help, just reply back.
Edit: @istperson, AFAIK, you cannot pick out files from a .img file like that. When I right click it on my system and choose mount it tells me the image file is corrupted. Tried downloading again and hashes match. Windows 10. I use 7zip as well, and that can't open it either. Is there another program to use or is something whacky on my end? Wouldn't doubt it. Just took a Win10 update yesterday and it's been acting up on me all day. :/
Click to expand...
Click to collapse
Chmod 755 worked too
Hi,
as you know the steps for the speaker/headset and phone volume are not so smooth in Z5C stock rom. You can edit them in a easy way without hacking any files. To edit the values you need a rooted phone.
Steps:
1. You to system and open the build.prop. For this I use the app BuildProp Editor from the playstore BuildProp Editor, but you also take the internal text editor.
2. Open the file build.prop
3. insert at the end of the file these two entries:
Code:
ro.config.vc_call_vol_steps=6
ro.config.media_vol_steps=30
4. save the file and restart your phone.
Bingo - you have now many more steps for vol +/-
The first code line is for call volume
The second code line for media volume
Tested on Z5C 32.4.A.1.54 - stock rom
You can use any number of steps that you want.
Enjoy
Remember: You are responsible for everything that you are doing with your phone.
I will try adding these settings with resetprop in a service.d script and see if it works
Results: nothing changed when I put the script in service.d, but it works perfectly in post-fs-data.d
Thank you