It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Mr_Maz said:
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Click to expand...
Click to collapse
I had a bunch this was the case! Thanks for confirming.
Sent from my GT-I9300 using xda app-developers app
But how would one plug a usb cable into the hdmi port?
The_Biz said:
But how would one plug a usb cable into the hdmi port?
Click to expand...
Click to collapse
there is a MHL adapter that gives you a male 11 pin micro USB to female HDMI so you can just plug a standard male to male HDMI cable from adapter to TV.
see:
Samsung Galaxy S III MHL to HDMI adapter
Does anyone know if this new adapter will work with the Galaxy Nexus, as well? Also, does it charge the phone--or at least keep it from being drained--when USB OTG is being used? I've been looking for a way to use USB OTG with a flash drive on my GN while also charging/powering the phone. USB OTG is a real power hog.
It should, but on mine it doesn't.
I've got a new MHL cable and a USB OTG cable in the hope I could plug my MHL into the SGS3, use a powered USB hub connected to the Micro USB on the MHL and then connect a keyboard and mouse into the USB hub, then connect the HDMI to the TV.
For me it doesn't work. I thought this was the whole reason they changed the MHL cable to the new type. Can anyone else confirm?
Logicalstep
can we get an update on this situation here? How
can we get MHL AND USB OTG?
My reading of the link is that the micro USB port has been repinned to provide USB on the go and not that the cable allows for this.On the mhl cable there is a female HDMI port and a micro USB ( both female) which must be used by the charger.
If the usb connection is also female type, we have to use a usb otg cable to get it work. But at the moment my phone also wont recognize any devices -.-' only mhl and nothing else.
I bought this adapter for 25 euros and want to have it working.
I also asked samsung on facebook 'bout this problem, and everything the told me:
Go support site...
very helpful.
I hope the will enable this feature in a future update.
Is there a recommended Y cable to use for USB OTG charging with my N7 2012?
I just got my USB OTG cable, still pretty new to it, so I thought I'd ask before I purchase the y cable for USB OTG charging.
I want to create a USB powered 4 port hub setup for the shield. I'm curious as to the safety of having 2 separate USB power sources connected at once.
Basically it goes from shield to OTG Y cable powered by USB to a USB Y cable powered by another USB to 4 port hub.
Will this setup allow the hub to pull more than 2 amps assuming the USB Y power source can output?
The OTG Y cable is on amazon, "Apricorn USB power adapter Y cable AUSB-Y USB"
http://www.amazon.com/Apricorn-Power-Adapter-Cable-AUSB-Y/dp/B000JIOHDE
To be clear the Shield is my tablet
Hello, i cant use my xbox controller with otg cable just bliking led, any suggestions
Ive managed to work in app usb joy centre gold. But i think its not enough power with single usb cable it can be true?
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Glops4 said:
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Click to expand...
Click to collapse
I don't know if that has changed but for cm you have to use an app like StickMount to be able to mout the USB stick.
Ok thanks, I guess I have to root then.
I used only es file Explorer and it worked for me. I testet Ext hdd, mous, keyboard and controller
Same, no root required, just an usb C OTG and a file explorer. Be aware that the OTG or the device could be uncompatible...
Glops4 said:
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Click to expand...
Click to collapse
I bought a USB-C to USB-A Converter and it works for me. Official USB type-c adapter has no support for OTG.
hfutxqd said:
I bought a USB-C to USB-A Converter and it works for me. Official USB type-c adaipter has no support for OTG.
Click to expand...
Click to collapse
This might be the proper solution, it seems.
" type-c adapter for my Z1 to use OTG cable and Usb key"
What speed did you get to ?
Lenovo Zuk Z1
I tried Xiaomi USB typeC adapter with a SanDisk micro USB memory and it doesn't work
I have the same problem.At my oneplus 2 with adapter working normal but at Z1 not working.
No solution about that ? I got 2 adapters now (noname and Victsing) but still no otg, and usb storage options are unavailable !
Does it support in twrp recovery.. i mean does otg recognising in twrp...???
Strange, it should work out of the box on COS 12.1...just received my second Zuk1 and hooked up the Z1 to my car to read out the ECU, it worked without an hitch! Did not try a USB stick though...
I have 2 cables, one is with the micro USB for which I use a micro USB to type C USB adapter, the second USB OTG cable already has already the Type C connector and connects straight up.
I never used my "charging cable" as the idea is to plug your USB stick straight onto the OTG interface cable.
i have rooted/unlocked zuk z1.
tried every possible stuff (es file explorer,stick mount, usb troubleshooting etc), tried changing the otg cable, tried changing pendrives, nothing helps.
can anyone please help me?
xda is my only hope