Related
Ahh, hind sight is a wonderful thing.
After trying to use kingroot to get root access, it failed. And a few days later after rebooting.
I'm now stuck at bootup with Start Up Failed.
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
I've now tried lot's of different things, over the last few hours.
RSDLite (show device brings no thing up)
Unlock bootloader (request key, but error regarding OEM unlock not being set - no access to now set it LOL)
Downloaded stock X_Play_UK_Retail_XT1562_LPD23.118-10_CFC.xml.zip, and tried using various guides on fastboot but keep getting remote failed.
I'm on stock recovery (obviously still locked).
Any thoughts, or hope from anyone?
Obviously, not sure what support Motorola would provide for what is essentially my own fault?
Have you tried manually flashing each bit of the stock firmware/image. That might help. There's a good guide here which I followed to unbrick my device. Just follow the instructions http://theunlockr.com/2015/09/22/how-to-unroot-the-motorola-moto-x-play/
Or try this one.
http://forum.xda-developers.com/showthread.php?t=2499926
Tried the first fastboot oem lock begin but get ... (althought my phone is locked already)
(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 0.063s
So stepping to next command, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
(bootloader) has-slotartition: not found
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.166s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.078s
sharebubbles said:
Tried the first fastboot oem lock begin but get ... (althought my phone is locked already)
(bootloader) Not supported command in current status!
FAILED (remote failure)
finished. total time: 0.063s
So stepping to next command, I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash partition gpt.bin
(bootloader) has-slotartition: not found
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.166s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.078s
Click to expand...
Click to collapse
I think you need to unlock the bootloader and then start with the 'fastboot oem lock begin' command. You can't flash a system image with a locked bootloader. Let me know how it goes!
DTLblaze said:
I think you need to unlock the bootloader and then start with the 'fastboot oem lock begin' command. You can't flash a system image with a locked bootloader. Let me know how it goes!
Click to expand...
Click to collapse
I run the unlock command, with my unique key but I get ..
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.013s
And since I can't get into the phone, I can't therefore check the "allow OEM unclock"
Have you tried any erase data commands or reset commands? Perhaps you could reset the phone so kingroot is un-installed and then try to turn on the phone. Short of that I'm stuck for ideas really, accept booting into 'fastboot and then erasing all data and factory reset in there. Let me know.
DTLblaze said:
Have you tried any erase data commands or reset commands? Perhaps you could reset the phone so kingroot is un-installed and then try to turn on the phone. Short of that I'm stuck for ideas really, accept booting into 'fastboot and then erasing all data and factory reset in there. Let me know.
Click to expand...
Click to collapse
I tried the wipe data/factory reset and wipe cache partition from the stock recovery.
And if I try from fastboot:-
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase userdata
(bootloader) has-slot:userdata: not found
erasing 'userdata'...
OKAY [ 0.196s]
finished. total time: 0.198s
And then a fastboot reboot.
Back to the now standard "start up failed"
And the
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot reason: Fall-through from normal boot mode
Sickaxis79 said:
Or try this one.
http://forum.xda-developers.com/showthread.php?t=2499926
Click to expand...
Click to collapse
Have downloaded, and tried that - but the crux appears to be the fact that my bootloader is locked and I can't access the OEM checkbox. And therefore the tool itself can't unlock or equally install TWRP.
Unless I'm missing something in it's usage.
sharebubbles said:
I tried the wipe data/factory reset and wipe cache partition from the stock recovery.
And if I try from fastboot:-
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase userdata
(bootloader) has-slot:userdata: not found
erasing 'userdata'...
OKAY [ 0.196s]
finished. total time: 0.198s
And then a fastboot reboot.
Back to the now standard "start up failed"
And the
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot reason: Fall-through from normal boot mode
Click to expand...
Click to collapse
That really does sound like you bricked the device. If you where on lollipop software you wouldn't have the issue with check bootloader OEM unlock. If it was me I would either contact Motorola or go to a repair shop and have a motd experienced person take a look at it.
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
sharebubbles said:
Have downloaded, and tried that - but the crux appears to be the fact that my bootloader is locked and I can't access the OEM checkbox. And therefore the tool itself can't unlock or equally install TWRP.
Unless I'm missing something in it's usage.
Click to expand...
Click to collapse
Strange. This is the tool I used to unlock my bootloader.
drmuruga said:
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
Click to expand...
Click to collapse
I've ben used the latest rom so far why trying to flash (and failing) when I look at recovery I have a LPD23.118-10 number that matches to an earlier 5.1.1 rom (I had been upgraded to 6.0.1 via OTA updates) - do I therefore take that LPD ID to mean that I should actually use the 5.1.1 rom - I'm in the UK, so I'm assuming I'd use the UK one rather than Europe (I'm looking at roms on https://github.com/motoxplay/stock).
Thanks
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
sharebubbles said:
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
Click to expand...
Click to collapse
And also never try kingroot.
sharebubbles said:
Dooh!!
Looking back at what I was doing yesterday, within the mix of downloading various roms - appears that I was actually using the LPD23.118-10 and NOT the latest.
I figured, I'd give it one last whirl using the latest not expecting much - and hey presto, it's worked. Just in the process of resetting it all up again.
Thanks for everyone who contributed, and a lesson learnt about always rechecking what you attempt (and not to try to root if you're not 100% sure of what I'm doing)
Click to expand...
Click to collapse
Most in the threads suggesting using rsdlite or manual flash/root and you decided to use kingroot,haha.
Welcome back.
Guys I have been searching EVERYWHERE on how to unbrick my moto x play, I used kingroot and it bricked, been a week and I TRIED everything. CAN ANYONE HELP PLEASE!!!!!!
---------- Post added at 05:26 AM ---------- Previous post was at 05:14 AM ----------
Guys I have been searching EVERYWHERE on how to unbrick my moto x play, I used kingroot and it bricked, been a week and I TRIED everything. CAN ANYONE HELP PLEASE!!!!!!
Tried restoring it, deleted everything and the phone is still on bootloader (LOCKED) and i dont even know how to fix it, I know nothing on how to root, friend suggested it, downloaded it, installed it, didnt work and then i restarted my phone and now its stuck on bootloader screen and the screen has the message "Start up failed: your device didnt start up successfully. Use the software repair assisstant on computer to repair your device. Connect your device to your computer to get the Software Repair Assistant." <- Downloaded it, tried it and it was stuck on 6% on repairing, left it over night and it was still on 6%.
ALSO under the message "AP Fastboot Flash Mode(Secure) is there)
Hai same problem for my moto x play ple.......s help contact.7708892303(WhatsApp no.)
pravin kkr said:
Hai same problem for my moto x play ple.......s help contact.7708892303(WhatsApp no.)
Click to expand...
Click to collapse
Download and flash this firmware
https://mega.nz/#!H5YlDCrD!T8tAAW7nHVS-erizRiqg5-Yp_p23hKParMjjHD4diQA credits @kumeipark
Use RSD lite to flash the firmware
http://rsdlite.com/rsd-lite-download/
Moto drivers
http://motorola-mobility-en-in.custhelp.com/app/answers/detail/a_id/88481
If you have problems installing device drivers using Windows 8.1 or Windows 10 follow this guide
https://www.youtube.com/watch?v=gmw86KplqmU
And don't post your contact no. in public forums for everyone to see.
what is the decryption key for the mega link
drmuruga said:
Try this, not necessary for unlock bootloader
Recognized Contributor3,144 posts Thanks: 1,591
Quote:
Originally Posted by sheikh.sami17
but i have locked bootloader. can i flash stock firmware with locked bootloader?
YES you can flash stock Moto roms meant for your model and carrier only.
Also, Never attempt to downgrade.
In this page
http://forum.xda-developers.com/moto-x/moto-x-qa/q-how-to-flash-to-stock-firmware-t3041813
I edit and made one firmware autoflasher for my x play Indian version and flashed successfully . everybody should check sparsechunk files no in flash file of your extracted stock firmware and edit my autoflasher files according to number of sparsechunk files and flash your firmware. It is definitely safe and I flashed my firmware by this but use at your own risk .
https://mega.nz/#!aoETEL7b!6WUe8tXeh...HHohpfYf2duoLc
First you have to download your phone's correct firmware and extract in fastboot folder , and add my autoflasher and check your sparsechunk files number and make changes according to that in autoflasher then save ..Enter your phone in fastboot mode or in bootloader and not in stock recovery and run autoflasher.
IF YOU HAVE ANY DOUBT AT TAKING RISK , CONTACT Motorola AND MAKE EVERYTHING EASY.
Click to expand...
Click to collapse
provide the decryption key
I've followed a couple tutorials of that explain how to unlock Motorola's Moto G4 bootloader. This seems to be the "official" one from Motorola:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b
I copied part of it up to where I get stuck. Here it is:
Put your device in fastboot mode (power off, then press the power and volume down buttons simultaneously).
On your desktop, open a command prompt or terminal, and go to the directory where you installed the Android SDK tools (or make sure fastboot is in your $PATH)
At the prompt, type $ fastboot oem get_unlock_data
The returned string will be used to retrieve your unlock key.
Example: On a Windows Desktop, the returned string format would be $ fastboot oem get_unlock_data
(bootloader) 0A40040192024205#4C4D3556313230
(bootloader) 30373731363031303332323239#BD00
(bootloader) 8A672BA4746C2CE02328A2AC0C39F95
(bootloader) 1A3E5#1F53280002000000000000000
(bootloader) 0000000
****************************************
OK, so I just bought a Moto G4 for $125 on Amazon's prime day. This means that it has ads on the lock screen. I'm OK with that. But I think they also made the locked bootloader unlocakble as 3 times I've gotten this from a Windows machine in ADB mode:
(bootloader) Unlock data:
(bootloader) 3A45210407248602#
(bootloader) 5A59323233433246534C004D6F746F2047200000#
(bootloader) 1095EFAB6000EDC14660539C503A04F7900B9A01#
(bootloader) 9F93C800000000000000000000000000
There should be numbers in that first Bootloader line and then Motorola says:
You're device does not qualify for bootloader unlocking.
Has anybody else had this happen? This is my second time doing this to a Motorola phone and the Moto g2 was a snap! I was hoping to install a custom recovery like TWRP so I could get a nandroid backup while everything is new
Marty
LinuxHippy said:
You're device does not qualify for bootloader unlocking.
Has anybody else had this happen? This is my second time doing this to a Motorola phone and the Moto g2 was a snap! I was hoping to install a custom recovery like TWRP so I could get a nandroid backup while everything is new
Marty
Click to expand...
Click to collapse
A Lot of us have already unlocked our bootloader
Rempala said:
A Lot of us have already unlocked our bootloader
Click to expand...
Click to collapse
Do u have the Amazon moto g4?
I do and I unlocked my bootloader and rooted the phone already.
Yes I have the Amazon G4
Well, these posts gave me hope that I was repeating the same mistake and I was. Forth time worked to unlock the BL. I was deleting the # signs at the end of each line. That was the mistake. It should be this from 4 lines:
3A45210407248602#5A59323233433246534C004D6F746F2047200000#1095EFAB6000EDC14660539C503A04F7900B9A01#9F93C800000000000000000000000000
Now I'm trying to boot into the TWRP image I flashed with fastboot and fastboot gave me errors about it not being signed so I'm not sure it worked. Where are people here getting the Moto g4 TWRP images? I went here:
https://www.androidfilehost.com/?w=...23bf15e9165ccc3b437c48af2047195d3fae863dca817
This is what I get when I try to flash TWRP now and then reboot into it with adb:
C:\Users\Huntz\Downloads>fastboot devices
ZY223C2FSL fastboot
C:\Users\Huntz\Downloads>fastboot flash recovery twrp_athene_20160526.img
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (12498 KB)...
OKAY [ 0.398s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.344s]
finished. total time: 0.746s
C:\Users\Huntz\Downloads>adb reboot recovery
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: no devices/emulators found
Just FYI, Motorola's bootloader unlock website has a webtool that you can use to clean the output of get_unlock_data, so you'll only get the relevant info. Copy-paste the raw code into the tool, hit clean, copy paste the output into the unlock code line on the website, submit.
Regarding TWRP, yes I think everyone gets that "Image not signed or corrupt" message. Also, you can't "adb reboot recovery" from fastboot. Just flash it via fastboot, reboot into fastboot, then go into recovery.
Maybe it did install twrp OK since it still boots into the original stock ROM OK. How do u get into twrp with the buttons on the phone?
LinuxHippy said:
Maybe it did install twrp OK since it still boots into the original stock ROM OK. How do u get into twrp with the buttons on the phone?
Click to expand...
Click to collapse
Boot into fastboot (press and hold power + volume down, let go when the bootloader screen shows up), press down on the volume rocker twice, and it'll say "recovery mode" on the screen. Press power once and it'll boot into TWRP.
Something's wrong then. I get to the fastboot screen OK but when I go into recovery it says your device has been unlocked and can't be trusted. It will reboot in 5 sec and then I see a dead robot.
EDIT
it does boot OK into the stock ROM from there if u do nothing for a minute or two or if u just hold in power button for 15 secs to get a black screen and then release the button and hold it 4 secs to get a normal boot
Sounds like TWRP didn't flash correctly, or maybe was a bad download (can download directly from TWRP's website here: https://dl.twrp.me/athene/). Reboot back into fastboot and try flashing TWRP again (you might also want to try renaming it to recovery.img, so the flashing command would be "fastboot flash recovery recovery.img").
I'll try again later today-hopefully it works and thanks for the link
I'm gonna try doing adb in Linux too.
xtermmin said:
Sounds like TWRP didn't flash correctly, or maybe was a bad download (can download directly from TWRP's website here: https://dl.twrp.me/athene/). Reboot back into fastboot and try flashing TWRP again (you might also want to try renaming it to recovery.img, so the flashing command would be "fastboot flash recovery recovery.img").
Click to expand...
Click to collapse
When u reboot now, do u get a 5 second delay screen that says your device has been unlocked and can't be trusted?
Marty
LinuxHippy said:
When u reboot now, do u get a 5 second delay screen that says your device has been unlocked and can't be trusted?
Marty
Click to expand...
Click to collapse
Yes, that is normal for devices with unlocked bootloaders. You can get rid of it by rebooting into fastboot and following this guide: http://forum.xda-developers.com/showpost.php?p=67031810&postcount=5
(if you don't have mfastboot, you can use plain-old fastboot as well)
I'm puzzled-the md5 on twrp was right and I unlocked the BL OK. I'll try it in Linux later and see if it takes.
Might be worth trying another USB port or even another cable. Some people have issues when trying to flash things on a USB 2.0 phone plugged into a USB 3.0 port.
About how much time should it take to flash twrp? I don't think it even flashed anything yesterday because it was too quick.
LinuxHippy said:
About how much time should it take to flash twrp? I don't think it even flashed anything yesterday because it was too quick.
Click to expand...
Click to collapse
It is almost instantaneous. As for the booting into recovery and seeing the dead robot, that is probably due to the fact that the phone tries to re-write the recovery when you reboot automatically. Just flash the twrp.img, and then go to recovery from the bootloader without rebooting and you will be fine; just make sure you have whatever you want to flash (e.g. supersu) on your device storage when you get there.
Sounds like a plan! What's the md5 on the supersu file?
Need some help if someone can do that
- I have oem unlocked my b/l with unlock code, install twrp, try some polished rom but i don't like it and try to go back to oem locked state to flash an RUU file through ADB...
When i go to download/fastboot mode and type a "fastboot oem lock" command i have a message
"C:\adb>fastboot oem lock
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X01, enable unlock
OKAY [ 0.028s]
finished. total time: 0.029s"
to my PC and on my phone i have a question "Yes to OEM lock and hard reset or No to live..."
I point to Yes and when confirm that my phone rebooted to a loop rebooting and blinking display with HTC logo and red words text...
Whatever i try to do it's always blinking/rebooting
Is there any way to normallise my phone and turn to any normal state?!
TNX
I moved out from previous state!!!
What a luck!
Dont know how but pressed VolUp+VolDown+Power and gone to bootloader state. After that have to unlock b/l again and after that when gone to Recovery, my TWRP is still there what a sweetness....
When enter to TWRP just some quick tex "Decrypting phone" and immediately rebooting to a normal state with all working phone states!
Is there any way to lock b/l again, turn to OEM state and to do a normal/regular HTC updating???
My last HTC update was 1.64.401.10 and European version...
Any advice?
TNX
Flash stock recovery: https://forum.xda-developers.com/u-ultra/development/unlocked-model-stock-recovery-t3585622 and you should be able to lock your bootloader successfully.
Never update with a third-party recovery. After you are done updating, install custom recovery again.
Ok.
I didn't know that
Tnx
Hello, i have a serious problem with my U Ultra.... Last night I unlocked the bootloader, I installed TWRP(lastest version from official site), before all this I made backup (with TWRP) of every partition and then I make back-up of system, data, boot I think, I have everything on my laptop.
But I wanted to back on stock (Don't ask me why...) and i restored a back-up, a full back-up of every partitions. Everything great, but google play didn't had Device Certification: Uncertified like in this pic and I tried to do this method and it didn't worked and I don't know why I thought that if I will relock the bootloader, everything will be okay :| and now I don't have TWRP anymore and of course neither stock recovery, but the stock rom boots but the password I have made it, is not working.
Tried to unlock bootloader but this error shows up
Code:
diesel-X550CL Downloads # fastboot flash unlocktoken Unlock_code.bin
target reported max download size of 1578400000 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 1.006s]
writing 'unlocktoken'...
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
Now how can I solve this problem?
How did you did the bootloader relocking?
For what purpose you need the Google Play certification?
QDT said:
How did you did the bootloader relocking?
For what purpose you need the Google Play certification?
Click to expand...
Click to collapse
Through fastboot with this command:
Code:
fastboot oem lock
I don't need it for a special purpose but some apps don't work and I saw that was the solution, anyways I don't need that no more, I just want the phone to work....
Just go to fastboot mode perform oem unlock and reinstall the twrp
QDT said:
Just go to fastboot mode perform oem unlock and reinstall the twrp
Click to expand...
Click to collapse
Code:
fastboot flash unlocktoken Unlock_code.bin
target reported max download size of 1578400000 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 1.006s]
writing 'unlocktoken'...
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
I can't because oem unlock is not turned off
kempactick said:
I can't because oem unlock is not turned off
Click to expand...
Click to collapse
You don't need to use the HTC file. Your phone is permanently hardware unlocked since the first flash.
All you now need to do is simple
Code:
fastboot oem unlock
QDT said:
You don't need to use the HTC file. Your phone is permanently hardware unlocked since the first flash.
All you now need to do is simple
Code:
fastboot oem unlock
Click to expand...
Click to collapse
i tried this one too...
Code:
diesel-X550CL Downloads # fastboot oem unlock
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.005s]
finished. total time: 0.005s
This error are just because of oem unlock from developer settings.. How can I trick this?
kempactick said:
i tried this one too...
Code:
diesel-X550CL Downloads # fastboot oem unlock
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.005s]
finished. total time: 0.005s
This error are just because of oem unlock from developer settings.. How can I trick this?
Click to expand...
Click to collapse
In what mode are you?
QDT said:
In what mode are you?
Click to expand...
Click to collapse
I'm on download mode, bootloader mod ain't for flashing
kempactick said:
I'm on download mode, bootloader mod ain't for flashing
Click to expand...
Click to collapse
Then what I can only advise is getting RUU of your system's current or newer version and force to reflash everything including bootloader.
QDT said:
Then what I can only advise is getting RUU of your system's current or newer version and force to reflash everything including bootloader.
Click to expand...
Click to collapse
Tried to flash RUU but is not working too, i'm trying with htc sync right now
I have the same issue after relocking my phone. Before I decided to lock my phone to downgrade to nougat, I did flash twrp and a rooted stocked oreo rom. After locking my phone using fastboot my phone stuck into download mode bootloop, I was able to get into download mode properly but I couldn't afford to download ruu from easy-firmware to flash in ruu mode
iAlcatrazZ said:
I have the same issue after relocking my phone. Before I decided to lock my phone to downgrade to nougat, I did flash twrp and a rooted stocked oreo rom. After locking my phone using fastboot my phone stuck into download mode bootloop, I was able to get into download mode properly but I couldn't afford to download ruu from easy-firmware to flash in ruu mode
Click to expand...
Click to collapse
I couldn't solve the problem myself, so I went to a gsm service and they couldn't solve it, 1 month of trying and one day my dad told me to go to the warranty service and I didn't, he went there and I don't know how they accepted the phone with the another reason and in a hour they solved the problem. I'm still using the phone and I can't wait to get rid of it.
So... I don't know how to help you, you should go to a gsm service, regards!
kempactick said:
I couldn't solve the problem myself, so I went to a gsm service and they couldn't solve it, 1 month of trying and one day my dad told me to go to the warranty service and I didn't, he went there and I don't know how they accepted the phone with the another reason and in a hour they solved the problem. I'm still using the phone and I can't wait to get rid of it.
So... I don't know how to help you, you should go to a gsm service, regards!
Click to expand...
Click to collapse
I managed to restore my phone :v, I could partially remember how I did it, I'm still gathering resources so that I can write a complete guide for everyone
hello friends I have the motorola g5 plus xt1680 by telcel. I have the bootloader blocked and I also have many files in memory that I do not want to lose.
I got a security patch which I downloaded and installed correctly, after updating my mistake I let the cell phone completely discharge, reaching the battery at 0%, after this I can not turn on the device stays in the motorola logo.
I have already tried to flash firmwares using adb but I can not mark me error, errors similar to this one:
fastboot flash partition gpt.bin
target reported max download size of 534773760 bytes
sending 'partition' (45 KB)...
OKAY [ -0.000s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling
gpt.default.xml
FAILED (remote failure)
finished. total time: 0.066s
for more than download firmware images, all of them make me the same error and I can not find the solution on the internet.
I have been several days and can not find a solution, it is very important not to lose my files that I have on my cell phone.
Would any of you help me please?
Have u tried using the Moto Smart Assist to reflash the phone? It should automatically detect the correct firmware for you.
But if you want to flash one of the firmwares you have, leave out the "fastboot flash partition gpt.bin" and "fastboot flash bootloader bootloader.img" commands and the flash should work fine. Apparently the update you took updated the partition tables on your device so you either have to flash without downgrading or flash using the exact firmware that the gpt.bin file is using.
If you need to get your files off first, download TWRP here, and then copy it into the directory where you have fastboot and run
"fastboot flash recovery twrp-3.2.3-1-potter.img" and then scroll down with the vol keys until you get reboot to recovery. (If it doesn't flash correctly you may have to push vol key down to reboot bootloader and try flash again) After inside TWRP, you should be able to use your password to decrypt your data and then use a USB cable to get your things off the phone or take a TWRP backup of your data / internal storage partitions and restore those after a fresh flash.
Drkmatr1984 said:
Have u tried using the Moto Smart Assist to reflash the phone? It should automatically detect the correct firmware for you.
But if you want to flash one of the firmwares you have, leave out the "fastboot flash partition gpt.bin" and "fastboot flash bootloader bootloader.img" commands and the flash should work fine. Apparently the update you took updated the partition tables on your device so you either have to flash without downgrading or flash using the exact firmware that the gpt.bin file is using.
If you need to get your files off first, download TWRP here, and then copy it into the directory where you have fastboot and run
"fastboot flash recovery twrp-3.2.3-1-potter.img" and then scroll down with the vol keys until you get reboot to recovery. (If it doesn't flash correctly you may have to push vol key down to reboot bootloader and try flash again) After inside TWRP, you should be able to use your password to decrypt your data and then use a USB cable to get your things off the phone or take a TWRP backup of your data / internal storage partitions and restore those after a fresh flash.
Click to expand...
Click to collapse
thanks, I had already tried to revive my phone with moto smart assist but the software tells me that my phone is not compatible.
I can install twrp if I have the bootloader blocked or I need to open the bootloader to use twrp? but when I open the bootloader my phone restarts from the factory that will erase all my files
I think I've already got the most recent security patch that is updated, apparently this is:
https://mega.nz/#!jxUEXazJ!TVU8n458ZZwd5TfP12I_uEvslYgGc5vakyUaOeSqMOs
can I install that version on my cellphone without any risk ?
then I can flash it without losing my data by omitting the command fastboot erase userdata or is it more advisable to use the ocpion of twrp to recover my data as you explain my friend?
Thank you very much for the help
Well, if the bootloader is locked, then you can't flash TWRP until you unlock it, which you can't do because you can't get into the system to enable OEM unlocking from developer options. So you're pretty limited to what you can do...
I believe fastboot flashing everything using the exact same firmware as your most recent update, but omitting the gpt.bin, bootloader, and userdata commands would work.
I tried to flash the last ota for the motorola g5 plus and now I can install almost everything but when it comes time to flash the following commands it marks me error:
fastboot erase customize
fastboot erase logo
and now how do I fix that I reboot the device and it keeps giving me boot on the motorola logo
c:\Herramientas ADB\platform-tools>fastboot erase customize
erasing 'customize'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.006s
c:\Herramientas ADB\platform-tools>fastboot erase clogo
erasing 'clogo'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.005s
and now how can I solve that someone help me
july48 said:
I tried to flash the last ota for the motorola g5 plus and now I can install almost everything but when it comes time to flash the following commands it marks me error:
fastboot erase customize
fastboot erase logo
and now how do I fix that I reboot the device and it keeps giving me boot on the motorola logo
c:\Herramientas ADB\platform-tools>fastboot erase customize
erasing 'customize'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.006s
c:\Herramientas ADB\platform-tools>fastboot erase clogo
erasing 'clogo'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.005s
and now how can I solve that someone help me
Click to expand...
Click to collapse
Why don't use ADB pull command to pull the data from device and run the all command of flashing except bootloader and gpt.
riyan65 said:
Why don't use ADB pull command to pull the data from device and run the all command of flashing except bootloader and gpt.
Click to expand...
Click to collapse
I think the problem is he can't get past bootloader so no ADB commands for him to have access to, and his bootloader is locked and since his system won't boot he can't turn on OEM unlocking to unlock it to flash TWRP or something similar to give him ADB commands.
july48 said:
I tried to flash the last ota for the motorola g5 plus and now I can install almost everything but when it comes time to flash the following commands it marks me error:
fastboot erase customize
fastboot erase logo
and now how do I fix that I reboot the device and it keeps giving me boot on the motorola logo
c:\Herramientas ADB\platform-tools>fastboot erase customize
erasing 'customize'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.006s
c:\Herramientas ADB\platform-tools>fastboot erase clogo
erasing 'clogo'...
bootloader Permission denied
FAILED remote failure
finished. total time: 0.005s
and now how can I solve that someone help me
Click to expand...
Click to collapse
Your problems are not related to the errors for "customize" and "clogo". These entries are for customazions made by Moto Maker and it's normal that they fail if you don't have any of these.
If your device doesn't boot you may have downgraded your bootloader in the past.
I have already tried to omit the bootloader and gpt commands, and I still have the same problems only in that part of the code, having the bootloader blocked limits me a lot, I do not know if I have to wait for the firmware of my phone company Telcel to flash it by adb and see if only so I retrieve the phone.
I do not know what else to try if there is any other solution
july48 said:
I have already tried to omit the bootloader and gpt commands, and I still have the same problems only in that part of the code, having the bootloader blocked limits me a lot, I do not know if I have to wait for the firmware of my phone company Telcel to flash it by adb and see if only so I retrieve the phone.
I do not know what else to try if there is any other solution
Click to expand...
Click to collapse
If you have the most recent firmware you don't need to omit the bootloader and gpt commands, and the clogo and customize commands almost always fail, you don't even really need them.
If it's still not booting I'm not sure what else to tell you to try. Someone in another one of my posts suggested trying to boot with "fastboot boot boot.img" and then possibly you could switch on OEM unlocking from the developer options, then reboot, unlock bootloader, and flash again or flash TWRP and use recovery to recover from there.
But I'm not guaranteeing that will do anything other than be stuck at boot logo.