Database Users

help needed to get twrp installed

I have a Redmi Note 1GB ram, 2 sims ( model HM NOTE 1S CT ) running ANDROID 4.4.4 MIUI 8.6.7.28 beta.
I'm trying to install TWRP onto it but keep getting the same error as shown below:
C:\Users\david\Desktop\wt86047-TWRP3.0.2-0_LP\adb>fastboot erase recovery
erasing 'recovery'...
OKAY [ 0.078s]
finished. total time: 0.078s
C:\Users\david\Desktop\wt86047-TWRP3.0.2-0_LP\adb>fastboot flash recovery twrp.img
target reported max download size of 268435456 bytes
sending 'recovery' (13408 KB)...
OKAY [ 0.426s]
writing 'recovery'...
OKAY [ 0.563s]
finished. total time: 0.989s
C:\Users\david\Desktop\wt86047-TWRP3.0.2-0_LP\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.425s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.534s
I've tried many different twrp versions but always the same error. Anyone help ?

Why you need to flash twrp.img to boot? When I did this part, it was done already.
C:\Users\david\Desktop\wt86047-TWRP3.0.2-0_LP\adb>fastboot flash recovery twrp.img
target reported max download size of 268435456 bytes
sending 'recovery' (13408 KB)...
OKAY [ 0.426s]
writing 'recovery'...
OKAY [ 0.563s]
finished. total time: 0.989s
Click to expand...
Click to collapse

That,s just to check it. It should reboot the phone into twrp, but standard recovery is still there.
Even if I try to boot into twrp using the volume down/power button, standard recovery comes up.

Can anyone help ?

blankers said:
Can anyone help ?
Click to expand...
Click to collapse
What ROM are you on? If you are on a Custom ROM already, you can try to use TWRP manager to install.
Another option would be you flash another recovery, like PhilzTouch, and then a Custom ROM, then TWRP manager...

the 2nd command should work "fastboot flash recovery twrp.img"
in my case.its always working.i already try many times
1.flash stock miui rom using MIUI flash tool
2. flash twrp using fastboot "fastboot flash recovery twrp.img"
3. reboot
note : after flashing twp you need to execute "fastboot reboot" and miui/custom rom should boot normally
then reboot to recovery
i used twrp3.0.2

Help p9 lite, black screen how to fix it

Good afternoon to all, I need a lot of help. I have a p9 lite VNS-L23 C605B120, try to install the rom revolution nougat, unlock the bootloader, install the recovery and from there an update file, when I finish, I reset and the phone left with the black screen, I connect it, the PC and I recognize it: Android bootloader interface, do not enter with the 3 buttons: vol + vol - and button on.
I need help on how I can flash it, with some program or how I can fix it, and what are the necessary files ... Thank you very much already.
Pd: the HiSuit of hawei is opened every time I connect the phone to the PC, but it does not allow me to recover the system, at the beginning it leaves: it is acceded to the system recovery mode, I click to recover system and then leaves, the device Does not support system recovery.

Same here unfortunately

Can you to enter to fastboot? If yes is the bootloader locked or unlocked?

Potato997 said:
Can you to enter to fastboot? If yes is the bootloader locked or unlocked?
Click to expand...
Click to collapse
This is in flashboot mode, and yes unlock bootloader, but black screen, allows to restart with commands, but unfortunately I do not have much knowledge about this, I hope help, what steps can I take to be able to turn it on.

Try to flash again TWRP and boot to recovery.

By fastboot I can reset, install twrp, reboot, but still black screen, there is no vibration, but when connecting the phone, appears in android bootloader interface. What else can I do with commands

As I said, can you boot to TWRP?

Potato997 said:
As I said, can you boot to TWRP?
Click to expand...
Click to collapse
See

hanzox5 said:
See
Click to expand...
Click to collapse
....
But no reboot in recovery

C:\Program Files (x86)\HiSuite\hwtools>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (13810 KB)...
OKAY [ 0.297s]
writing 'boot'...
OKAY [ 0.491s]
finished. total time: 0.788s
C:\Program Files (x86)\HiSuite\hwtools>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (32960 KB)...
OKAY [ 0.704s]
writing 'recovery'...
OKAY [ 1.143s]
finished. total time: 1.862s
C:\Program Files (x86)\HiSuite\hwtools>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (331661 KB)...
OKAY [ 7.077s]
writing 'cust'...
OKAY [ 8.053s]
finished. total time: 15.149s
C:\Program Files (x86)\HiSuite\hwtools>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' (452763 KB)...
OKAY [ 10.992s]
writing 'system'...
OKAY [ 11.640s]
sending sparse 'system' (458056 KB)...
OKAY [ 10.877s]
writing 'system'...
OKAY [ 11.137s]
sending sparse 'system' (459104 KB)...
OKAY [ 11.816s]
writing 'system'...
OKAY [ 12.201s]
sending sparse 'system' (457466 KB)...
OKAY [ 11.096s]
writing 'system'...
OKAY [ 11.214s]
sending sparse 'system' (460756 KB)...
OKAY [ 11.049s]
writing 'system'...
OKAY [ 11.190s]
sending sparse 'system' (135249 KB)...
OKAY [ 3.234s]
writing 'system'...
OKAY [ 3.302s]
finished. total time: 119.793s
C:\Program Files (x86)\HiSuite\hwtools>fastboot reboot
rebooting...
finished. total time: 0.016s
C:\Program Files (x86)\HiSuite\hwtools>

Reboot to recovery in this way: shut down the phone, press volume up + power button
Factory reset
Reboot

Do not enter recovery, still on black screen, can tell me which software I can flash it

I already told you like three times.. try both TWRP and stock recovery..

I installed the twrp as the stock recovery and try to enter using press volume up + power button, and nothing
Is there any way to force the phone to enter twrp via fastboot, would help me with commands.

hanzox5 said:
I installed the twrp as the stock recovery and try to enter using press volume up + power button, and nothing
Is there any way to force the phone to enter twrp via fastboot, would help me with commands.
Click to expand...
Click to collapse
fastboot boot recovery.img
Try that.
Also you should try the three buttons method now.

C:\Program Files (x86)\HiSuite\hwtools>fastboot boot recovery.img
creating boot image...
creating boot image - 33753088 bytes
downloading 'boot.img'...
OKAY [ 0.703s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.719s

hanzox5 said:
C:\Program Files (x86)\HiSuite\hwtools>fastboot boot recovery.img
creating boot image...
creating boot image - 33753088 bytes
downloading 'boot.img'...
OKAY [ 0.703s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.719s
Click to expand...
Click to collapse
ಠ_ಠ
Weird.

479/5000
Several times I installed TWRP and stock recovery, and I can not enter any of the 2 forms and even with the three buttons, I even purchase a micro SD of 32gb class 10, with this saying that the SD was the one that did not work.
Please, let's go again, I recommend doing from 0 to try to solve this blessed problem. That I should be doing, it will be possible to clean the cache and user data from fastboot, and from there to do something more.

Have you tried three button method with update.app in dload folder in SD card?
If yes, did it gave you some error/did the update started/when did it stopped?

If I have the sd, and inside the Dload folder, update.app, but it does nothing.

Brick. Goes directly to eRecovery

I flashed LineageOS OpenKirin than I flashed AOSP meliticoulous and i got bricked. I tried to do the 3 buttons and dload folder method and fastboot flashing system, recovery and boot from upadte.apk. Than i finded that i need to change oeminfo. I changed it and after restart my phone shows only huawei logo and goes to eRecovery. It doesnt show unlocked bootloader screen. I also cant install recovery via fastboot
PS C:\Users\User\Documents> fastboot flash recovery twrp-3.1.1-0-venus.img
target reported max download size of 471859200 bytes
sending 'recovery' (24464 KB)...
OKAY [ 0.875s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.891s
PS C:\Users\User\Documents>
I don't know what to do. Please help me
EDIT
I flashed L21C432oemInfo-DS.zip than update.app but when i press 3 buttons on 5% i get message Software install failed

Honor 8 Lite Hard-Bricked in BOOTLOADER mode.

Hi all, Please help me.
Just yesterday, I screwed my Honor 8 Lite.
By hoping to solve issue missing fingerprint option, I've flashed my Honor 8 Lite PRA-TL10 Russian to PRA-LA1C185B101(MiddleEast).
Flashing steps that I did:
- Unlock bootloader
- Flash Elite-TWRP and boot into TWRP
- Flash PRA-LA1C185's OEMINFO from TWRP.
- Flash StockRecovery.img from TWRP.
- Put SDCard that contains "dload" from PRA-LA1C185101 firmware
- Disconnect and Power off device.
- Force Update firmware by pressing Volume_UP + Volume_Down + Power.
- Firmware updating process began.. and I left it running...
- 10 minutes later I check the phone and IT IS DEAD! OMG!!!
Phone's screen remain black/dark, no vibration, no response to combinations buttons press, no sign of life. Then I try to connect to PC, device still detected as "ADB Sooner Single ADB Interface", and it is in bootloader mode. I can and have use fastboot command to "flash" boot/recovery/system/cust/userdata, but it failed to bring my Honor 8 Lite alive..
The screen still remain black/dark, no matter what button I pressed, it keeps rebooting into bootloader mode.
When I check from fastboot:
C:\Huawei\ROM\Restore>fastboot getvar rescue_phoneinfo
rescue_phoneinfo: PRA-LA1C185B165
finished. total time: 0.012s
C:\Huawei\ROM\Restore>fastboot devices
DUPNW17XXXXXXXX3 fastboot
C:\Huawei\ROM\Restore>fastboot oem check-rootinfo
...
(bootloader) old_stat: NULL
(bootloader) now_stat: NULL
(bootloader) change_time: NULL
OKAY [ 0.020s]
finished. total time: 0.021s
Click to expand...
Click to collapse
My fastboot flashing results:
C:\Huawei\ROM\Restore>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (15520 KB)...
OKAY [ 2.728s]
writing 'boot'...
OKAY [ 0.300s]
finished. total time: 3.030s
C:\Huawei\ROM\Restore>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (35568 KB)...
OKAY [ 5.787s]
writing 'recovery'...
OKAY [ 0.669s]
finished. total time: 6.458s
C:\Huawei\ROM\Restore>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (111459 KB)...
OKAY [ 2.794s]
writing 'cust'...
OKAY [ 0.811s]
finished. total time: 3.607s
C:\Huawei\ROM\Restore>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' 1/6 (460796 KB)...
OKAY [ 12.158s]
writing 'system' 1/6...
OKAY [ 3.654s]
sending sparse 'system' 2/6 (457285 KB)...
OKAY [ 12.152s]
writing 'system' 2/6...
OKAY [ 3.055s]
sending sparse 'system' 3/6 (458042 KB)...
OKAY [ 12.358s]
writing 'system' 3/6...
OKAY [ 3.507s]
sending sparse 'system' 4/6 (430632 KB)...
OKAY [ 11.429s]
writing 'system' 4/6...
OKAY [ 2.938s]
sending sparse 'system' 5/6 (460799 KB)...
OKAY [ 12.158s]
writing 'system' 5/6...
OKAY [ 2.952s]
sending sparse 'system' 6/6 (456400 KB)...
OKAY [ 12.178s]
writing 'system' 6/6...
OKAY [ 2.989s]
finished. total time: 91.539s
C:\Huawei\ROM\Restore>fastboot flash userdata userdata.img
target reported max download size of 471859200 bytes
sending sparse 'userdata' 1/2 (458754 KB)...
OKAY [ 12.080s]
writing 'userdata' 1/2...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 3.300s]
sending sparse 'userdata' 2/2 (290817 KB)...
OKAY [ 7.655s]
writing 'userdata' 2/2...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 1.884s]
finished. total time: 24.924s
C:\Huawei\ROM\Restore>fastboot flash oeminfo oeminfo
target reported max download size of 471859200 bytes
sending 'oeminfo' (65536 KB)...
OKAY [ 7.512s]
writing 'oeminfo'...
FAILED (remote: Command not allowed)
finished. total time: 7.522s
Click to expand...
Click to collapse
Bricked conditions:
- Screen remain OFF, no Light, no Image. I believe this is NOT LCD DAMAGED issue.
- Detected(Stuck) as bootloader device.
- Updatable/flashable from fastboot.
- No responses to buttons pressed, except POWER_LONG_PRESSED to reboot... into bootloader again and again.
- Bootloader unlocked.
Please any body help me..
EDIT:
I've revived my device with DC Phoenix flashing tool, using firmware PRA-TL10C10B170.
Thanks to Mr. HasanMirza01 for his great supports. I won't be able to revive this device without him.
For others who facing this same issue, just buy service from DC(cost you min. 4 credits to 15 credits) and just flash it using DC-Phoenix and your original model's firmware. It will bring your Honor 8 Lite back to life once again.
NOTE:
NEVER convert PRA-AL00/PRA-TL00 model to PRA-LX1/PRA-LA1. Doing so will brick your device.

MultiTool Unbricking results
08:09:33: All images are found, everything is ready for the unbricking process.
08:10:10: Unbricking started. Your computer may freezes during the process.
08:10:10: flash boot "C:\Huawei\ROM\Restore\boot.img"
08:10:11: The Boot image is flashing successfully
08:10:11: flash system "C:\Huawei\ROM\Restore\system.img"
08:14:01: The System image is flashing successfully
08:14:01: flash cust "C:\Huawei\ROM\Restore\cust.img"
08:14:04: The Cust image is flashing successfully
08:14:04: flash recovery "C:\Huawei\ROM\Restore\recovery.img"
08:14:06: The Recovery image is flashing successfully
08:14:06: flash userdata "C:\Huawei\ROM\Restore\userdata.img"
08:15:18: target reported max download size of 471859200 bytes
sending sparse 'userdata' 1/2 (458754 KB)...
OKAY [ 12.109s]
writing 'userdata' 1/2...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 3.284s]
sending sparse 'userdata' 2/2 (272385 KB)...
OKAY [ 7.168s]
writing 'userdata' 2/2...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 1.802s]
finished. total time: 24.363s
08:15:18: Error#1
08:15:18: Completed
08:15:18: Something went wrong (((

DC - Unlocker 2 Client detection..
DC - Unlocker 2 Client 1.00.1390
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Phone : PRA-LA1
Model : Huawei phone in fastboot mode
IMEI : 86xxxxxxxxxxxx3
Serial NR. : DUPNWxxxxxxxxxx3
Firmware : PRA-LA1C185B165
IMEI1:86xxxxxxxxxxxx6
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 0

Can u access Erecovery??
by pressing vol up with power button.. release power button when phone b0ot up...
usb cable should be connected.... phone should be in shutdown state while using these steps.
2nd way to erecovery is hold volume up & power... when bootup release both buttons then press n hold volume up...

liboct87 said:
Can u access Erecovery??
by pressing vol up with power button.. release power button when phone b0ot up...
usb cable should be connected.... phone should be in shutdown state while using these steps.
2nd way to erecovery is hold volume up & power... when bootup release both buttons then press n hold volume up...
Click to expand...
Click to collapse
Unfortunately, no sir. It can not boot into eRecovery mode.
It can only boot into fastboot mode with screen off, no light at all.
This is strange, since I did not messing with bootloader.

I have the same problem, flashed OEM-info PRA-LX1C432 on my PRA-AL00C00
I thing no way out

eifeldragon said:
I have the same problem, flashed OEM-info PRA-LX1C432 on my PRA-AL00C00
I thing no way out
Click to expand...
Click to collapse
strange!!!!!
i did this before
i have PRA-LA1C185
flashed chinese oem than europe oem info... now m back to chinese....
try to get into erecovery ur problem will be solved br0
best of luck man

eifeldragon said:
I have the same problem, flashed OEM-info PRA-LX1C432 on my PRA-AL00C00
I thing no way out
Click to expand...
Click to collapse
liboct87 said:
strange!!!!!
i did this before
i have PRA-LA1C185
flashed chinese oem than europe oem info... now m back to chinese....
try to get into erecovery ur problem will be solved br0
best of luck man
Click to expand...
Click to collapse
I think there's are differences between the PRA-LA1/PRA-LX1 with PRA-AL00/PRA-TL10/PRA-TL00 devices..
I think those devices have different board firmware.
PRA-LA1 can be converted to PRA-LX1, may be, never tested..
PRA-AL00 can be converted to PRA-TL10. TESTED..
PRA-AL00 can not be converted to PRA-LA1.. like my case.. it BRICKED
PRA-TL10 can not be converted to PRA-LX1, it will bricked, like my case too.
Beware of Honor regions conversion..
I haven't test conversion with DC-HCU tool, may be it will work since it rebuild the whole board firmware..
Note: I've recover my bricked Honor 8 Lite. Thanks to Mr. HassanMirza01 that giving me a lot of supports. I'll never able to recover my Honor 8 Lite without him. He is really my life saviour.

Unlucky for us there's no free flashing tool to use in this case.
May be some expert can sniff on usb connections with paid tool, to see what commands send to the device. To see how that paid tool can flash our phone even if it is on bootloader mode, which we certainly couldn't do that with "fastboot". And willing to put works on it to provide Huawei users a powerful enough flashing tool, that could bring phone alive..
So we no need to worry about this hard-brick issue..

Sorry, double post..

So what service from DC-Unlocker exactly did you use?

i need help (my phone smells softbrick or hardbrick and have bootloop) I have a p8 lite 2015 (ALE-L23)

This phone have probably softbrick or hardbrick and bootloop and intro to recovery (no erecovery) gets a rescue mode screen
I have tried with the "potatonv" tool and trying to flash a stock rom and a custom recovery but none work and I have the bootloader unlocked but I get these following results:
>fastboot flash RECOVERY RECOVERY.img
target reported max download size of 471859200 bytes
sending 'RECOVERY' (36118 KB)...
OKAY [ 0.986s]
writing 'RECOVERY'...
FAILED (remote: Command not allowed)
finished. total time: 1.012s
>fastboot flash recovery RECOVERY.img
target reported max download size of 471859200 bytes
sending 'recovery' (36118 KB)...
OKAY [ 1.000s]
writing 'recovery'...
FAILED (remote: flash write prim vrl failure)
finished. total time: 1.468s