Good day. I would like to share on how I downgraded my H860 from N back to MM stock.
Note: I'm not held responsible to anything that may damage your phone. Do it own your own risk. Thank you.
Prerequisite:
- KDZ file from HERE (H860N10g_00_OPEN_HK_DS_OP_1014.kdz)
- KDZ stock file for your own phone.
- Autoprime's LG UP 1.14.3 and UPPERCUT from HERE
- LG UP 1.11 HERE
- LG Driver from HERE
Procedure:
- Install LG drivers. Remove any old drivers if necessary.
- Install LG UP 1.14.3 first. Uninstall any old version of LG UP.
- Boot your phone into download mode by powering the phone off then PRESS and HOLD VOLUME UP while plugging the data cable.
- Open LG UP via UPPERCUT.
- Select "UPGRADE".
- Select BIN file "H860N10g_00_OPEN_HK_DS_OP_1014.kdz".
- Start. Wait until done.
Next:
- Once above is successful. Uninstall LG UP 1.14.3
- Install LG UP 1.11. Open LG UP 1.11 (Do not use Uppercut to open v1.11)
- Boot your phone into download mode by powering the phone off then PRESS and HOLD VOLUME UP while plugging the data cable.
- Select "REFURBISH".
- Select BIN file of your stock KDZ.
- Close LG UP
- Open again LG UP and Start.
- Wait until done.
That's all. Thank you.
Credits:
Autoprime
LG-Firmwares.com
Did quite get the method..
I'm trying to downgrade for my sprint LG G5.
H860N10g_00_OPEN_HK_DS_OP_1014 is ZV8 or ZV6/5?
- Select BIN file of your stock KDZ. -- Didn't get this step also..
I mean what needs to be flashed with LGUP 1.14 and what with 1.11 ?
can you pls elaborate so that I can try on my version.
Thanks... Will try it soon.
thanks,
i want downgrade from v20 to v10 and I'm looking for V10 AME Country for the H860 not N if u have any link can u put it
yashshah87 said:
Did quite get the method..
I'm trying to downgrade for my sprint LG G5.
H860N10g_00_OPEN_HK_DS_OP_1014 is ZV8 or ZV6/5?
- Select BIN file of your stock KDZ. -- Didn't get this step also..
I mean what needs to be flashed with LGUP 1.14 and what with 1.11 ?
can you pls elaborate so that I can try on my version.
Click to expand...
Click to collapse
It's all elaborated already. Just follow the procedures. Thank you.
$ CoMpLiCaTeD $ said:
thanks,
i want downgrade from v20 to v10 and I'm looking for V10 AME Country for the H860 not N if u have any link can u put it
Click to expand...
Click to collapse
I used H860N because that's the one worked for me. I haven't tried the AME. Because ESA which is my original firmware doesn't also worked. That's why I used H860N then ESA.
Can I flash H650 kdz on sprint G5?
bluerain28 said:
It's all elaborated already. Just follow the procedures. Thank you.
Click to expand...
Click to collapse
I just didn't get whether I need to flash Android N or M kdz with 1.14.3 ?
yashshah87 said:
I just didn't get whether I need to flash Android N or M kdz with 1.14.3 ?
Click to expand...
Click to collapse
You need to flash the M (H860N [HK M version]) KDZ using 1.14.3. Then flash again M (Your Stock KDZ file) via refurbish using 1.11.
bluerain28 said:
You need to flash the M (H860N [HK M version]) KDZ using 1.14.3. Then flash again M (Your Stock KDZ file) via refurbish using 1.11.
Click to expand...
Click to collapse
when i open autoprime it says needs lgup1.4. it does not recognize 1.11.
forbeisgunn said:
when i open autoprime it says needs lgup1.4. it does not recognize 1.11.
Click to expand...
Click to collapse
Line corrected.
- Install LG UP 1.11. Open LG UP 1.11 (Do not use Uppercut to open v1.11)
Click to expand...
Click to collapse
bluerain28 said:
You need to flash the M (H860N [HK M version]) KDZ using 1.14.3. Then flash again M (Your Stock KDZ file) via refurbish using 1.11.
Click to expand...
Click to collapse
bluerain28 said:
Line corrected.
Click to expand...
Click to collapse
Thanks!
But what was the N version you were using before, Hongkong N also?
ok i was able to do the first part only cause after boot up, the PASSWORD or PIN of my device was changed??? how is that possible.
I am certain i placed the right combination. did u change something in the KDZ file on the password part?
---------- Post added at 03:32 PM ---------- Previous post was at 03:20 PM ----------
oh thanks it works now. i just hard rest myphone! im back to my original firmware.
i can attest that your process works!
just need a little more "fin tuning" or elaboration on the step by step process.
THANKS SO MUCH BLUERAIN!
Since this doesn't rely on an unlocked boot loader, could this method be used for the Verizon vs987? And what files would we need to do so?
hi. thanks for your efforts.
i have 3 problem with your way.
1: files that you share couldnot able to download and link is broke. please upload to another server.
2: for using of lgup program use of lg g5 dll file isnt neccesery? that you didnt mention in your advise.
bluerain28 said:
Good day. I would like to share on how I downgraded my H860 from N back to MM stock.
Note: I'm not held responsible to anything that may damage your phone. Do it own your own risk. Thank you.
Prerequisite:
- KDZ file from HERE (H860N10g_00_OPEN_HK_DS_OP_1014.kdz)
- KDZ stock file for your own phone.
- Autoprime's LG UP 1.14.3 and UPPERCUT from HERE
- LG UP 1.11 HERE
- LG Driver from HERE
Procedure:
- Install LG drivers. Remove any old drivers if necessary.
- Install LG UP 1.14.3 first. Uninstall any old version of LG UP.
- Boot your phone into download mode by powering the phone off then PRESS and HOLD VOLUME UP while plugging the data cable.
- Open LG UP via UPPERCUT.
- Select "UPGRADE".
- Select BIN file "H860N10g_00_OPEN_HK_DS_OP_1014.kdz".
- Start. Wait until done.
Next:
- Once above is successful. Uninstall LG UP 1.14.3
- Install LG UP 1.11. Open LG UP 1.11 (Do not use Uppercut to open v1.11)
- Boot your phone into download mode by powering the phone off then PRESS and HOLD VOLUME UP while plugging the data cable.
- Select "REFURBISH".
- Select BIN file of your stock KDZ.
- Close LG UP
- Open again LG UP and Start.
- Wait until done.
That's all. Thank you.
Credits:
Autoprime
LG-Firmwares.com
Click to expand...
Click to collapse
Can I Downgrade Frm HK Rom(H860N) on my H860 only to Latest MM ROM H86010M Released fr my Indian h860 model ?? If yes ?? Shld i select mm rom in secnd step with lg up 1.1 n Shld i select HK rom on frst step with Lg up 1.14 ?? Please guide me
In secnd step my phone model says unkwn in lg up 1.1
---------- Post added at 02:45 PM ---------- Previous post was at 02:34 PM ----------
Can i downgrade ?? Coz my phone is indian version h860 n iam on HK H860N rom
And there still no Nougat officially fr my g5 h860 version !! I wanna downgrade to my h86010m Official version frm HK Rom on my h860 ??
forbeisgunn said:
Thanks!
But what was the N version you were using before, Hongkong N also?
Click to expand...
Click to collapse
I was using Hongkong N before I downgraded to MM.
forbeisgunn said:
ok i was able to do the first part only cause after boot up, the PASSWORD or PIN of my device was changed??? how is that possible.
I am certain i placed the right combination. did u change something in the KDZ file on the password part?
---------- Post added at 03:32 PM ---------- Previous post was at 03:20 PM ----------
oh thanks it works now. i just hard rest myphone! im back to my original firmware.
i can attest that your process works!
just need a little more "fin tuning" or elaboration on the step by step process.
THANKS SO MUCH BLUERAIN!
Click to expand...
Click to collapse
Thanks for the feedback. And I also forgot about the PIN or PATTERN. I'll add some notes in the post.
mohammsh said:
hi. thanks for your efforts.
i have 3 problem with your way.
1: files that you share couldnot able to download and link is broke. please upload to another server.
2: for using of lgup program use of lg g5 dll file isnt neccesery? that you didnt mention in your advise.
Click to expand...
Click to collapse
1. All links are fine and up.
2. Uppercut > automatically recognized the DLL to be used. DLL is needed in the next procedure which you will use the LG UP v1.11.
Rishi223 said:
Can I Downgrade Frm HK Rom(H860N) on my H860 only to Latest MM ROM H86010M Released fr my Indian h860 model ?? If yes ?? Shld i select mm rom in secnd step with lg up 1.1 n Shld i select HK rom on frst step with Lg up 1.14 ?? Please guide me
In secnd step my phone model says unkwn in lg up 1.1
---------- Post added at 02:45 PM ---------- Previous post was at 02:34 PM ----------
Can i downgrade ?? Coz my phone is indian version h860 n iam on HK H860N rom
And there still no Nougat officially fr my g5 h860 version !! I wanna downgrade to my h86010m Official version frm HK Rom on my h860 ??
Click to expand...
Click to collapse
Yes you can downgrade to your official H860M or any H860 M
bluerain28 said:
I was using Hongkong N before I downgraded to MM.
Thanks for the feedback. And I also forgot about the PIN or PATTERN. I'll add some notes in the post.
1. All links are fine and up.
2. Uppercut > automatically recognized the DLL to be used. DLL is needed in the next procedure which you will use the LG UP v1.11.
Yes you can downgrade to your official H860M or any H860 M
Click to expand...
Click to collapse
Please Suggest me How to Downgrade ?? N reply to my questions
Rishi223 said:
Please Suggest me How to Downgrade ?? N reply to my questions
Click to expand...
Click to collapse
LG UP 1.11 Asks to " you have to select a known model , please " Its shows unknown model !! Please Help me
Rishi223 said:
LG UP 1.11 Asks to " you have to select a known model , please " Its shows unknown model !! Please Help me
Click to expand...
Click to collapse
After Succesfull update via lg bridge in secnd step !! Always on display stopped working nad it always displays continuesly !! pls help
great job man. thanks alot. i successfully downgrade to mm. my phone model is h860
great job man. thanks alot. i successfully downgrade to mm. my phone model is h860
---------- Post added at 05:31 PM ---------- Previous post was at 05:25 PM ----------
every things cameback to normal. mm is the best.
android nougat really was a google big failure. and if countinue in this way definitly will fail. nougat demolish my phone hard.
thanks alot again bro. :fingers-crossed:
Related
Sorry new FW new security tool of my can not work.
- Put phone to downloadmod
- Extract tool open file Tool.exe.
- Choose model lg g4. Then waitminute tool bypass
- When bypass done reboot phone then check.
- Good luck.
does not work on LG G4 H735
Aleksandr49 said:
does not work on LG G4 H735
Click to expand...
Click to collapse
IF 5.1.1 or android 6.0 need contact me i help online
Thanks a lot. Program great!!
Sent from my N9510 using Tapatalk
Is it work for H818?
It seem that its not work for H818 on android 6.0
naiveboy520 said:
Is it work for H818?
It seem that its not work for H818 on android 6.0
Click to expand...
Click to collapse
sure because laf.bin in android 6.0 lg sever fix can not connect comport
But i can fix online
tungkick said:
IF 5.1.1 or android 6.0 need contact me i help online
Click to expand...
Click to collapse
Thanks a lot. Program great!!
It is working perfectly with LG G4 815 but does not work with H735L LG G4 BEAT
When it will be possible to do it on H735L LG G4 BEAT 5.1 from your program.
Aleksandr49 said:
Thanks a lot. Program great!!
It is working perfectly with LG G4 815 but does not work with H735L LG G4 BEAT
When it will be possible to do it on H735L LG G4 BEAT 5.1 from your program.
Click to expand...
Click to collapse
update kdz 5.01 or 5.1
i really need help trying to bypass the FRP < previously synced google acount login verification> after factory reset - on an Boost mobile LG model LS751 volt 2 running on android 5.1.1. please please please cant find any method that works anywhere
aurora4420 said:
i really need help trying to bypass the FRP < previously synced google acount login verification> after factory reset - on an Boost mobile LG model LS751 volt 2 running on android 5.1.1. please please please cant find any method that works anywhere
Click to expand...
Click to collapse
You try choose number lg leon then test . If can not bypass contact me. I help you
LG leon
Hello, can you please tell me how to remove the FRP from a LG Leon (boost mobile)
I try the tools with all the 3 options and none of them work
thank you
jpgoma said:
hello, can you please tell me how to remove the frp from a lg leon (boost mobile)
i try the tools with all the 3 options and none of them work
thank you
Click to expand...
Click to collapse
downgage fw then try tool
I tried with the h735p software version: h73510B but not work, I don´t know the software version, I just bought this phone yesterday
@tungkick will this method work on model LGMS631 ( LG Stylo)? I see that nobody has been here recently.
---------- Post added at 07:13 AM ---------- Previous post was at 07:03 AM ----------
[/COLOR @tungkick sorry i just relooked at the picture with the post and i see lg stylo
thanks for the tool
not working on my VS986. program stops at # after what looks like LS command, phone remains at 0% of firmware update. Any help?
i share tool ver fix 5.01 5.1 android lg
this guy is the man!
tungkick said:
IF 5.1.1 or android 6.0 need contact me i help online
Click to expand...
Click to collapse
Hi, if possible, please help me in H735.
it keeps write : "#FAIL, #FAIL"
tobenary said:
Hi, if possible, please help me in H735.
it keeps write : "#FAIL, #FAIL"
Click to expand...
Click to collapse
Contact me but not free if tool failfail
"UPDATED WITH V20C FIRMWARE OF RUSSIA RELEASED FOR H818P MODEL WORKING PERFECTLY FINE ON H818N"
LG G4 H818N Indian Variant Running Marshmallow 'V20c kdz' using LGUP
Guys Please try at your own risk.Am not responsible if anything happens but i have upgraded to V20C Marshmallow without a hitch.
Thumbs is really appreciated if you like my work...!
Download Link Of Marshmallow 20C kdz :
https://drive.google.com/file/d/0B_a-1nSOSOPmb0RYLS1CNUtCbDQ/view
Download Link for Latest LGUP software :
https://mega.nz/#!MEQ2zLaI!6yj51L757cw-R_cm25lCdGMgFB9EBlMUXzitXan9n0s
https://www.dropbox.com/s/yjh8nmcrr8hziot/LGUP_Install_Ver_1_14_3_8994DLL.rar?dl=0
NOTE : THIS PROCESS IS REVERSIBLE YOU CAN STILL DOWNGRADE TO LOLLIPOP
Download the Required files please find the attachment files.
Firstly Please install the required LG Drivers for the phone then
Step 1) Extract the rar file attached and install " LGUP_8994_DLL_Ver_0_0_3_23.msi " then install " LGUP_Install_Ver_1_14_3.msi ".
Step 2) Connect the phone to pc and open LGUP then select the file H818N 20C kdz which is downloaded.
Step 3) Select UPGRADE option then just click START wait for the process to complete.
Step 4) After completion of whole process the phone will reboot and upgrade to Android 6.0 Marshmallow.
Step 5) Please make a HARD RESET after the process.Please Do search how to HARD Reset.
Step 6) Thats It your Done ..!
Hard Reset is not Mandatory until you are rooted before on lollipop
Everything is working fine after HARD RESET.
I received the update over LG-Bridge.
My info page shows everything same, exept I have Software V20a-HKG-XX
zyklotrop88 said:
I received the update over LG-Bridge.
My info page shows everything same, exept I have Software V20a-HKG-XX
Click to expand...
Click to collapse
Thats Good.Are you using LG G4 H818n Indian Variant...?
nykdpk said:
Thats Good.Are you using LG G4 H818n Indian Variant...?
Click to expand...
Click to collapse
Not really sure. I presume it is HongKong.
The Info Page looks like. I don´t know if there are real differences. It is 818N
Work for lg h818p ?
minOu45 said:
Work for lg h818p ?
Click to expand...
Click to collapse
Yes working 100% Sure.
hi my phone h818p i was updtae h8181n20a but have many problem dont work %100
sefai77 said:
hi my phone h818p i was updtae h8181n20a but have many problem dont work %100
Click to expand...
Click to collapse
You can still downgrade to lolipop from marshmallow with LGUP software just follow the steps as mentioned in the post...!
Check this out once :
http://forum.xda-developers.com/showpost.php?p=64141734&postcount=1322
It would be helpful to other users if you can say what all the errors you are getting after upgrade...!
nykdpk said:
LG G4 H818N Indian Variant Running Marshmallow 'V20a kdz' using LGUP
Guys Please try at your own risk.Am not responsible if anything happens but i have upgraded to V20A Marshmallow without a hitch.
I've really worked hard to find the V20A kdz file.Thumbs is really appreciated if you like my work...!
Download Link H818N 20A kdz :
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW6BW7J232O5AAU312FEN90/H818N20a_00.kdz
Download Link for Latest LGUP software :
https://mega.nz/#!MEQ2zLaI!6yj51L757cw-R_cm25lCdGMgFB9EBlMUXzitXan9n0s
NOTE : THIS PROCESS IS REVERSIBLE YOU CAN STILL DOWNGRADE TO LOLLIPOP
Download the Required files please find the attachment files.
Firstly Please install the required LG Drivers for the phone then
Step 1) Extract the rar file attached and install " LGUP_8994_DLL_Ver_0_0_3_23.msi " then install " LGUP_Install_Ver_1_14_3.msi ".
Step 2) Connect the phone to pc and open LGUP then select the file H818N 20A kdz which is downloaded.
Step 3) Select UPGRADE option then just click START wait for the process to complete.
Step 4) After completion of whole process the phone will reboot and upgrade to Android 6.0 Marshmallow with some warning message ignore it.
Step 5) Please make a HARD RESET after the process.Please Do search how to HARD Reset.
Step 6) Thats It your Done ..!
Everything is working fine after HARD RESET.
Click to expand...
Click to collapse
Amazing job!!!! Thanks Budd!
zeph_syk said:
Amazing job!!!! Thanks Budd!
Click to expand...
Click to collapse
Thanks Budd... Your Welcome...!
nykdpk said:
Thanks Budd... Your Welcome...!
Click to expand...
Click to collapse
Everything seems to be running smooth, except for an error which pops up on after restart/shutdown. The message reads " this build is not for end user" once you get pass the error message, everything else is smooth and normal.
My question to you is, if the error is expected and if i can still avail official OTA from LG or should I have to roll back to Lollypop manually and then upgrade?
zeph_syk said:
Everything seems to be running smooth, except for an error which pops up on after restart/shutdown. The message reads " this build is not for end user" once you get pass the error message, everything else is smooth and normal.
My question to you is, if the error is expected and if i can still avail official OTA from LG or should I have to roll back to Lollypop manually and then upgrade?
Click to expand...
Click to collapse
As per the news LG is rolling out official marshmallow to users only through LG Bridge only not OTA update.
The question to your answer will be revealed once you recieve official marshmallow to your device on LG Bridge.
But if marshmallow is officially released in your place and when you sync the device with LG Bridge if you get it is up to date then you have to download your official .KDZ file of your device and flash as you did now.No need to roll back Lollipop again...
LG G4 H818N Indain Variant Benchmark Scores
please have a look at the benchmark results..
Need someone confirm if work with H818p
Sent from my LG-H818 using Tapatalk
hello, i have lg g4 h818n. i want to ask do i have to root the device before installing marshmallow on it??? and does every app works fine with dis version of marshmallow?? thank you.
[email protected] said:
hello, i have lg g4 h818n. i want to ask do i have to root the device before installing marshmallow on it??? and does every app works fine with dis version of marshmallow?? thank you.
Click to expand...
Click to collapse
No Need to root your phone before installing.Just flash the posted .kdz as mentioned in the process.
Every thing is working flawlessly.It is really smooth...!
7sen said:
Need someone confirm if work with H818p
Sent from my LG-H818 using Tapatalk
Click to expand...
Click to collapse
Yes it works flawless on H818p model.Please find the below post.
http://forum.xda-developers.com/showpost.php?p=64152260&postcount=1327
Please find my post below for NEW antutu 6.0 test benchmarks.
http://forum.xda-developers.com/showpost.php?p=64218940&postcount=1358
Screenshot Lg h818n marshmallow.
LG G4 H818N Marshmallow V20c kdz.Please find my below post.
http://forum.xda-developers.com/showpost.php?p=64497802&postcount=1766
- FIle use lgup flash
- Need up Stock android 6.0 ver 20c f500k
- Then download system.tot flash next > Done
File TOT build only system> fix all error korea android 6.0 make by tungkick777
https://www.fshare.vn/file/SPX96R68DXAC
Donate: paypal : [email protected]
Thank you.
Can make all file system fix error if you send me system read dd if in downloadmod
I build file tot you flash.
tungkick said:
Can make all file system fix error if you send me system read dd if in downloadmod
I build file tot you flash.
Click to expand...
Click to collapse
The download link is not working..
Mainak said:
The download link is not working..
Click to expand...
Click to collapse
unhappy because host from vietnam
I think i upload host google drive
File need a pass to download!
Do not give nonsense here
Jedi Night said:
File need a pass to download!
Click to expand...
Click to collapse
i remove password you can try download.
rotoko said:
Do not give nonsense here
Click to expand...
Click to collapse
Lol file fix sms 160kt android 6.0>> what nonsense here? what do you mean? if you can download you flash. Because i can not upload googledrive very low when upload unsderstand?
Very good fix, but why still have three Korea app: olleh cs, olleh wifi Manager, and another app with Korea language
jedi night said:
very good fix, but why still have three korea app: Olleh cs, olleh wifi manager, and another app with korea language
Click to expand...
Click to collapse
how u flash this file....
jas_is_0n_fire said:
how u flash this file....
Click to expand...
Click to collapse
Using LGUP to flash .TOT file. But need to flash stock V20C first, if not, bluetooth can not work.
I TRIED ALL OFF THE FLASHING GUIDE BUT I M UNABLE TO FLASH ITS ERROR WHEN PROCESS IS AT 9%...ALSO MY MODEL IS LG F500K AND ANDROID IS 6.0 AND 20m ..so please help me to flash tot file.. i search more than a month but didnot find any tot for F500K
OR GIVE ME UR KDZ LINK OF 20C .. me also tried 20c but its failed by LGUP nd lg flash tool 2014
Thank you !!
jas_is_0n_fire said:
I TRIED ALL OFF THE FLASHING GUIDE BUT I M UNABLE TO FLASH ITS ERROR WHEN PROCESS IS AT 9%...ALSO MY MODEL IS LG F500K AND ANDROID IS 6.0 AND 20m ..so please help me to flash tot file.. i search more than a month but didnot find any tot for F500K
OR GIVE ME UR KDZ LINK OF 20C .. me also tried 20c but its failed by LGUP nd lg flash tool 2014
Thank you !!
Click to expand...
Click to collapse
https://www.fshare.vn/file/O32SK5OSPTR2
Any tot for lg f500k?
Thanx a lot for ur file..it will be better if it in google link
Ver F500K do you have @tungkick
So for Evrybody with a korean variant there is a new firmware. ( ->title) @Al0n maybe u can give us more details about the firmware
trix95 said:
So for Evrybody with a korean variant there is a new firmware. ( ->title) @Al0n maybe u can give us more details about the firmware
Click to expand...
Click to collapse
Two Korean models got an update today
F500K
This version is V20t.
And here is the download link:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW5255D652GKAHS31294LNP/F500K20t_00_0504.kdz
F500L
This version is V20u.
And here is the download link:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW522UE6523ZAGIF53949Z9/F500L20u_00_0504.kdz
Al0n said:
This version is V20t
And here is the download link:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW5255D652GKAHS31294LNP/F500K20t_00_0504.kdz
Click to expand...
Click to collapse
Its still 6.0.1? And they got allready v20t....
Al0n said:
This version is V20t
And here is the download link:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW5255D652GKAHS31294LNP/F500K20t_00_0504.kdz
Click to expand...
Click to collapse
ı use h815 can ı flash this kdz
trix95 said:
Its still 6.0.1? And they got allready v20t....
Click to expand...
Click to collapse
Still 6.0.
And maybe other Korean models already got V20t, but F500K got it only today.
By the way - your thread talks about F500L but the model that got the update is F500K.
Dammmnnnnn thats a nice missclick by me xD sryy will change it when i am back home
trix95 said:
Dammmnnnnn thats a nice missclick by me xD sryy will change it when i am back home
Click to expand...
Click to collapse
Wait a second...
If you check here you can see that both F500L & F500K got new update today:
http://devtester.ro/projects/lg-firmwares/country.php?country=Republic+Of+Korea
So I edited my post and added download link to F500L as well
---------- Post added at 05:36 PM ---------- Previous post was at 05:34 PM ----------
gavsi said:
ı use h815 can ı flash this kdz
Click to expand...
Click to collapse
No !!!
You will brick your phone!
Do not do it!
Al0n said:
Wait a second...
If you check here you can see that both F500L & F500K got new update today:
http://devtester.ro/projects/lg-firmwares/country.php?country=Republic+Of+Korea
So I edited my post and added download link to F500L as well
---------- Post added at 05:36 PM ---------- Previous post was at 05:34 PM ----------
No !!!
You will brick your phone!
Do not do it!
Click to expand...
Click to collapse
Thx @Al0n keep up your great work
trix95 said:
Thx @Al0n keep up your great work
Click to expand...
Click to collapse
Thank you
F500L converted H810
I was ditched by the seller. Got F500L but the Model shows H810 running att firmware. I am only able to recieve 2G reception. BY connecting to LG Bridge it shows Model:H810 and the Update available is F500L20u.
what should I do now? My phone is Sim Unlocked and I am using Different Network sims in it.
Can I update fw without losing my Sim Unlocked status? Which FW should I go for?
suhaibsalam said:
I was ditched by the seller. Got F500L but the Model shows H810 running att firmware. I am only able to recieve 2G reception. BY connecting to LG Bridge it shows Model:H810 and the Update available is F500L20u.
what should I do now? My phone is Sim Unlocked and I am using Different Network sims in it.
Can I update fw without losing my Sim Unlocked status? Which FW should I go for?
Click to expand...
Click to collapse
Check under back cover, it should say which model is it
Wysłane z mojego LG-H815 przy użyciu Tapatalka
Al0n said:
Two Korean models got an update today
F500K
This version is V20t.
And here is the download link:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW5255D652GKAHS31294LNP/F500K20t_00_0504.kdz
F500L
This version is V20u.
And here is the download link:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW522UE6523ZAGIF53949Z9/F500L20u_00_0504.kdz
Click to expand...
Click to collapse
Downlod link for F500L is not working. Can you please provide another link? i am looking for newer F500L Marshmallow firmwares
malic11101 said:
Downlod link for F500L is not working. Can you please provide another link? i am looking for newer F500L Marshmallow firmwares
Click to expand...
Click to collapse
F500K
This version is V20t.
And here is the download link: (fixed)
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW5255D652GKAHS31294LNP/F500K20t_00_0504.kdz
F500L
This version is V20u.
And here is the download link: (fixed)
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW522UE6523ZAGIF53949Z9/F500L20u_00_0504.kdz
suhaibsalam said:
I was ditched by the seller. Got F500L but the Model shows H810 running att firmware. I am only able to recieve 2G reception. BY connecting to LG Bridge it shows Model:H810 and the Update available is F500L20u.
what should I do now? My phone is Sim Unlocked and I am using Different Network sims in it.
Can I update fw without losing my Sim Unlocked status? Which FW should I go for?
Click to expand...
Click to collapse
isn't easy if u try to update it on other firmware u may have to face hard brick condition 9008 mode dont try it,the proper way for recover your device is using jtag box repair boot first on f500L than flash f500l firmware
Hello. Great news from me ?
I sucessfully changed my ISR firmware to EU firmware. And guess what, no cust error on boot. Yeahh
Its like this:
Just download latest 20p firmware and flash it via lgup 1.14 and uppercut. First set lgup to refurbish and click start. Phone will go to download mode and start flashing. It will give known error *kdz not supporting refurbish* and stop on 4%. Do not exit from download mode on phone. Reopen uppercut and flash 20p firmware in upgrade mode and wait.
After flashing make factory reset phone and voila U have 20p firmware without cust error message
I used this firmware
H85020p_00_EEO_GB_OP_0916.kdz
Happy flashing ?
Pics or screenshots would be appreciated ! Don't get me wrong ! No one wants to brick their phone
Danja31 said:
Pics or screenshots would be appreciated ! Don't get me wrong ! No one wants to brick their phone
Click to expand...
Click to collapse
You wont brick your phone dont worry. Follow instructions and will be no problem. Simple as that.
Even if i don't have the ISR model ?! I have the Canadian model
hey,i tried to do this with 20D firmware and it giving me same <Current version is not avaiable for user> error,how do i get rid of that?
Danja31 said:
Even if i don't have the ISR model ?! I have the Canadian model
Click to expand...
Click to collapse
It is for H850 eu model. Read for differences between models. If there is no difference, flashing will work. I dont know specs for Canadian model sorry
olmott said:
hey,i tried to do this with 20D firmware and it giving me same <Current version is not avaiable for user> error,how do i get rid of that?
Click to expand...
Click to collapse
Try to download 10c or 10e version. Flash it with lgup 1.11 in refurbish mode then on error flash 20p with uppercut. Which region is your phone?
jaskooo said:
Try to download 10c or 10e version. Flash it with lgup 1.11 in refurbish mode then on error flash 20p with uppercut. Which region is your phone?
Click to expand...
Click to collapse
my phone is form spain if i look on the box,but <lg phone from> app says provider is ABC Orange.
idk why is getting me this troubles i flashed 20D that's on xda before and all was fine.
ill try to download 10e version and 20p
olmott said:
my phone is form spain if i look on the box,but <lg phone from> app says provider is ABC Orange.
idk why is getting me this troubles i flashed 20D that's on xda before and all was fine.
ill try to download 10e version and 20p
Click to expand...
Click to collapse
20p version is on my first post. I used that
jaskooo said:
20p version is on my first post. I used that
Click to expand...
Click to collapse
guess ill have to wait for tomorrow
---------- Post added at 02:59 PM ---------- Previous post was at 02:34 PM ----------
jaskooo said:
20p version is on my first post. I used that
Click to expand...
Click to collapse
oh,and one more thing, it starts with new carrier apps from Orange (France) i bought i phone from there, i have no idea,i can't even root my phone cause of <waiting for any device> issue in adb fastboot
have changed my fw from 20k open EU to 20 p EEE for GB now. (but device was rooted!) No problems until now.
security level (as expected) Sep. 01/2017
Edit:
Ok, i have found my fault.To use 20p, it was necessary for me to backup cust folder from 20k at first and then to restore him to 20p!
Now i have no problems with BT and my secure level is 9.2017
jaskooo said:
Hello. Great news from me
I sucessfully changed my ISR firmware to EU firmware. And guess what, no cust error on boot. Yeahh
Its like this:
Just download latest 20p firmware and flash it via lgup 1.14 and uppercut. First set lgup to refurbish and click start. Phone will go to download mode and start flashing. It will give known error *kdz not supporting refurbish* and stop on 4%. Do not exit from download mode on phone. Reopen uppercut and flash 20p firmware in upgrade mode and wait.
After flashing make factory reset phone and voila U have 20p firmware without cust error message
I used this firmware
H85020p_00_EEO_GB_OP_0916.kdz
Happy flashing
Click to expand...
Click to collapse
Hi,
I've got H850 with v20c-ISR-XX firmware, I want to try your guide...
I'm in France, wich .kdz do you suggest for me ? H85020p_00_EEO_GB_OP_0916.kdz is good for me ?
Can you unlock your bootloader now with a EU rom ?
Regards.
ludz179 said:
Can you unlock your bootloader now with a EU rom ?
Click to expand...
Click to collapse
NO because you have the wrong IMEI and device ID for official unlocking!
ludz179 said:
Hi,
I've got H850 with v20c-ISR-XX firmware, I want to try your guide...
I'm in France, wich .kdz do you suggest for me ? H85020p_00_EEO_GB_OP_0916.kdz is good for me ?
Can you unlock your bootloader now with a EU rom ?
Regards.
Click to expand...
Click to collapse
Kdz is ok i have same old firmware as you and that is 20p firmware i used to flash. Try it freely
Ok, thanks non-toxic and jaskooo for your feedback. I will try to update it this week-end.
ludz179 said:
Ok, thanks non-toxic and jaskooo for your feedback. I will try to update it this week-end.
Click to expand...
Click to collapse
i recommand to update your whole cust folder with all other folders in it at first before updating to 20p!!
You should restore cust folder from 20c ( or your old version!) after backup!
And of curse edit your cust_path_mapping.cfg to your country code ( for me it was ffffffff,11 )
you will find your code entering *#546368#*850#
without this steps, i had many problems with system stability and BT!!!
non-toxic said:
i recommand to update your whole cust folder with all other folders in it at first before updating to 20p!!
You should restore cust folder from 20c ( or your old version!) after backup!
And of curse edit your cust_path_mapping.cfg to your country code ( for me it was ffffffff,11 )
you will find your code entering *#546368#*850#
without this steps, i had many problems with system stability and BT!!!
Click to expand...
Click to collapse
No way. How to backup cust folder or edit it when our isr g5 is not rootable. We cant unlock bootloader. I'm using 20p firmware after flash from 20c and apsolutely no problems at all. Cust folder is market depending for provider apps, network settings or similar. Firmware is same for all g5 h850 and hardware also.
Cheers
@jaskooo
if you think, it is working alright, ok.....
the main thing is, that you are fully satisfied now!
jaskooo said:
Hello. Great news from me
I sucessfully changed my ISR firmware to EU firmware. And guess what, no cust error on boot. Yeahh
Its like this:
Just download latest 20p firmware and flash it via lgup 1.14 and uppercut. First set lgup to refurbish and click start. Phone will go to download mode and start flashing. It will give known error *kdz not supporting refurbish* and stop on 4%. Do not exit from download mode on phone. Reopen uppercut and flash 20p firmware in upgrade mode and wait.
After flashing make factory reset phone and voila U have 20p firmware without cust error message
I used this firmware
H85020p_00_EEO_GB_OP_0916.kdz
Happy flashing
Click to expand...
Click to collapse
I have a lg g5 f700l model, which is from Korea. How can I flash h850 version!?
Help
I have the f700l Korean version..... Can I somehow flash the international version!?