So I was following a method to root my phone. I was able to do this with success. I went to install a custom rom with Safestrap. I had my rom on my sd card, I wiped everything and went to install the rom to find out it was for the wrong model. I didnt make a backup and wasnt thinking so I went to reboot the phone. I cant get it to boot into any rom or recover the stock rom. I am able to get into odin mode and I flashed the stock kernel but that didnt work. Please help.
Kernel I used: VZW_BOK3_KERNEL_ONLY.tar.md5
I know what to do if I can get it to reboot back to a stock phone just need help getting to that step. Please please help.
You can get your phone back to stock by flashing a stock ODIN tar. Alternatively you could probably just get safestrap access back by flashing the NI2 kernel and then flash a new ROM.
NI2 kernel: https://www.androidfilehost.com/?fid=95916177934553221
ODIN stock ROM: https://www.androidfilehost.com/?fid=24438995911970571 (extract from .zip and then flash with ODIN)
Related
Hey there, I've recently made the purchase of a samsung galaxy S4 1337m
Once i got it home, the first thing i did was root it via Chainfires Root, and downloaded
rom manager, and installed CWM, and backed up my original OS with the original root
to a SD Card, once i did that I installed Odexed Andriod 4.3 for US and CAN, when i discovered
there was Chainsfire root guide for this version in particular, i tried to install it, what i did was attempt
to flash the latest root onto 4.3 via oden, after which i would flash the modded software to work for 4.3
however, in the process i ended up losing CWM, and the root all together, so i was wondering if anyone
was willing to lend me a hand getting the root onto my 4.3, so i can get my CWM back on.
Thanks!
DeathSentinels said:
Hey there, I've recently made the purchase of a samsung galaxy S4 1337m
Once i got it home, the first thing i did was root it via Chainfires Root, and downloaded
rom manager, and installed CWM, and backed up my original OS with the original root
to a SD Card, once i did that I installed Odexed Andriod 4.3 for US and CAN, when i discovered
there was Chainsfire root guide for this version in particular, i tried to install it, what i did was attempt
to flash the latest root onto 4.3 via oden, after which i would flash the modded software to work for 4.3
however, in the process i ended up losing CWM, and the root all together, so i was wondering if anyone
was willing to lend me a hand getting the root onto my 4.3, so i can get my CWM back on.
Thanks!
Click to expand...
Click to collapse
I haven't used 4.3 but from what I've read I believe you just flash the .zip chainfire provided from recovery.
So now you will have to ODIN back to stock if you lost your recovery, re-root, install recovery (recommend TWRP instead), re-flash 4.3, flash the .zip provided from chainfire in his post here:
https://plus.google.com/u/0/113517319477420052449/posts/WqS2E9kkN1L
blyndfyre said:
I haven't used 4.3 but from what I've read I believe you just flash the .zip chainfire provided from recovery.
So now you will have to ODIN back to stock if you lost your recovery, re-root, install recovery (recommend TWRP instead), re-flash 4.3, flash the .zip provided from chainfire in his post here:
https://plus.google.com/u/0/113517319477420052449/posts/WqS2E9kkN1L
Click to expand...
Click to collapse
Do you know whether or not I'm able to re-flash with oden using the recovery created by CWM?
Or do i need to download the stock rom for my phone, which i imagine I would do a factory wipe
then boot into download mode then flash the stock rom?
DeathSentinels said:
Do you know whether or not I'm able to re-flash with oden using the recovery created by CWM?
Or do i need to download the stock rom for my phone, which i imagine I would do a factory wipe
then boot into download mode then flash the stock rom?
Click to expand...
Click to collapse
He means Odin the stock ROM
DeathSentinels said:
Do you know whether or not I'm able to re-flash with oden using the recovery created by CWM?
Or do i need to download the stock rom for my phone, which i imagine I would do a factory wipe
then boot into download mode then flash the stock rom?
Click to expand...
Click to collapse
The backup created from CWM should be a .zip that is flash-able only from recovery afaik. You will need your stock firmware .tar file and flash with ODIN. This is only if you surely cannot boot into recovery. If you manage to boot to CWM you can flash your backup of course.
Your STOCK firmware can be downloaded here:
http://forum.xda-developers.com/showthread.php?t=2269304
blyndfyre said:
The backup created from CWM should be a .zip that is flash-able only from recovery afaik. You will need your stock firmware .tar file and flash with ODIN. This is only if you surely cannot boot into recovery. If you manage to boot to CWM you can flash your backup of course.
Your STOCK firmware can be downloaded here:
http://forum.xda-developers.com/showthread.php?t=2269304
Click to expand...
Click to collapse
I currently did a factory wipe on my device, and flashed using odin with my stock
rom, things are looking good thus far, will keep posted if anything goes not as planned!
I have an issue. I downloaded the ROM, ATT modules and Super SU. I made a mistake though. I extracted the files before I put them on my SD card. When I booted into Safestrap, I did the wipe but when you go to then select the ROM zip, it isn't there because the files are extracted. If I try and boot my phone back up to retry, I get stuck at Galaxy S4 screen. What do I need to do in order to try again? Thanks.
While the phone was in recovery mode, you could have used adb to push the ROM to the phone. Since you booted out of it, you cant. You need to start over by flashing the stock using Odin.
How do I flash to stock with Odin. I have only used Odin to change my Kernel version so I could use Towelroot. Which slot do I use in Odin and where to I get a stock NI1? Thanks.
https://www.androidfilehost.com/?fid=24052804347780457
Use it if you need to flash OA1 kernel if any issues on flashing a SS rom so you don't have to start all over again from stock
hit that thanks button if it helped you
Dont we have this already..??
feel free to link it I did not see one so I did it myself
So how would you use this? Flash in Odin AP slot? What about Root? Wouldn't you lose root if you did this?
flash in odin you'd use it if for some reason the device looped when forgetting to not install kernel immediately after rom when installing a lollipop rom from kitkat via safestrap
When you get into that situation you can't reboot back to safestrap to install said kernel via recovery, this fixes having to start all over again
figured why not upload incase someone else needed
Very cool.. Thank you
has been looking for this one since bad flash or forget to flash OC1. Thanks.
Were do I place this at in Odin
Sent from my Nexus 6 using Tapatalk
I need the nc2 kernel odin flashable
this is what i was looking for this whole weekend was trying to get lollipop stock rooted and install ss and flash xposed but never could get ss to work so i had to start over from stock kk
Hey guys i followed this youtube guide for rooting 5.1.1 using TWRP Method https://www.youtube.com/watch?v=qpsGX_Xoxcg
i downloaded all the files but the firmware (not listen i have n910W8 = telus)
I have odin, supersu, TWRP (which n910w8 is listed) and samsung drivers.
I moved superSU and the TWRP file to root directory of note 4 5.1.1. rebooted into download mode, saw the blue indicator on odin and loaded the file. Rebooted holding volume up this time and tried to load the kernal but it doesnt exist.
I think im confused the TWRP file is NOT the kernal? Where can I get a kernal for n910W8 (telus)
thanks in advance!!
So I found this
http://www.sammobile.com/firmwares/download/56498/N910W8VLU1COI4_N910W8OYA1COI4_TLS/
which is telus 5.1.1 Rom. ill move this to my root directory and load the 910W8 TWRP file in odin and flash? Ill give it a try now wish me luck lol
ok i followed a guide online and now my phone just keeps restarting. I think im in big trouble. Im able to load openrecovery-twrp-2.8.1.0-trltecan.img into odin and boot to TWRP but now i cant load kernels? looked so easy to do now im down a phone? any help is much appreciated thanks!!!
You need to odin (bell, rogers, telus) 5.1.1 then odin TWRP then twrp a custom kernel. Our 5.1.1 needs a custom kernel in order to work rooted. Or.....you can load a custom 5.1.1 rooted rom that is W8 compatible or any Tmobile rom such as Tekxodus which i am running.
ok so i loaded openrecovery-twrp-2.8.1.0-trltecan.img in AP (for my device) copied the custom rom
" cm-12.1-20150423-NIGHTLY-trltetmo" which was suppose to work with my 910w8 (910T) used recovery to flash it and also supersu it flashed OK... I restart and i see a little blue guy and its stuck optimizing apps. Suck in restart loop.
what did i do wrong? try a different kernel ?
thanks in advance
EDIT 1
im trying the " Tekxodus" rom. this file is way larger whats going on with that. Is it the same procedure to flash it?
EDIT 2
Flashed to tekxodus rom optimizing apps... now its stuck System UI has stopped. and I cant do nothing. Any suggestions? ?? ?
EDIT 3
Do I need to flash a certain BootLoader along with the recovery for my device (BL and AP) ? , reboot in recovery and flash the custom rom ie "Tekxodus" ?
found this guide for 910C
http://www.ibtimes.co.uk/how-root-galaxy-note-4-n910c-android-5-1-1-lollipop-1518168 with these steps
"Step-1: Download the flashable root package and transfer it to the storage of the phone
Step-2: Download Android 5.0.1 bootloader package. Extract it using any extracting tool and you should find a folder containing Odin flashable tar package and Odin binaries"
so confused lol
All you have to do is Odin stock 5.1.1 rom (COI4 i believe) then Odin TWRP then flash Tekxodus V3.2. Let everything optimize and let it sit there for a good 10 mins after optimization. Ignore what its doing. It will just work. No need to flash anything else unless you want Xposed, then you flash that right after flashing Tek (do not boot in between)
any idea where to get a custom kernel for 910w8 5.1.1 to root stock rom?
Im running this rom (flashed using odin)
http://www.sammobile.com/firmwares/download/56498/N910W8VLU1COI4_N910W8OYA1COI4_TLS/
stock telus rom. I loaded this rom by clicking BL in odin and selecting it (along with my recovery for telus 910w8). This was the only was to get my phone back into working order.
______-
I loaded my recovery for telus into odin and went to download mode.
booted into TWRP
Flashed Tekxodus V3.2.
Optimized apps for about 10 minutes and it just restarted and optimized again and again.
One time it said System UI has stopped and I was hooped.
not sure where I went wrong?
thanks for the response btw I really want to get this going cheers
equlizer said:
You need to odin (bell, rogers, telus) 5.1.1 then odin TWRP then twrp a custom kernel. Our 5.1.1 needs a custom kernel in order to work rooted. Or.....you can load a custom 5.1.1 rooted rom that is W8 compatible or any Tmobile rom such as Tekxodus which i am running.
Click to expand...
Click to collapse
can i use any carrier software for the COI4? That's my only question. Thanks for helping!!
I am currently running Optimal ROM with OD5 bootloader. Just got back into the rooted world last week after a warranty replacement stroke of luck. To be able to access SS to flash a different ROM, do I just flash the NCG kernel I have and boot?
Edit: Been out of the loop for a while and don't want to bork this thing
Anybody?
You can use flashfire which is a mobile odin and is in the playstore [root]Flashfire or you can safestrap. http://forum.xda-developers.com/verizon-galaxy-s5/general/guide-safestrap-access-odin-t3126686. Install busybox and and the safestrap bo3 in the link I provided. Make sure you install ss after busybox. The NI2 kernal flasher when used will install a kitkat kernel and bring you into ss.
Before all this download this zip and extract it.https://www.androidfilehost.com/?fid=24052804347777436 What you are looking to keep are the firmware and kernel zips. YOU MUST FLASH A KERNEL OR FIRMWARE AS THE LAST THING BEFORE EXITING SS. Otherwise you will get a blank screen.
Solution if you forget - battery pull - restart phone - ss symbol will appear - hit it and reenter ss.
Place everything I've told you to download on your ext sd. When you wipe - do not wipe ext sd.
example - If you're going from od5 to og5 you will ant to flash the og5 kernel as the last thing before leaving ss- just follow the rom's installation instructions to the letter
SS is already installed. I am running Optimal w/OD5 bootloader. I was wondering if just flashing NCG kernel would boot me back to SS screen. I'm old school and have been using Odin haven't tried FF and seem to see more posts of bricks with peeps using FF.
can flash kernel via odin
Chopstix9 said:
SS is already installed. I am running Optimal w/OD5 bootloader. I was wondering if just flashing NCG kernel would boot me back to SS screen. I'm old school and have been using Odin haven't tried FF and seem to see more posts of bricks with peeps using FF.
Click to expand...
Click to collapse
can flash kernel via odin if you are more comfortable with it... i would use the ni2 kernel that was mentioned in the earlier post