Database Users

How to root, step-by-step.

ok guys, so first, i want to apologize for my bad english. im not very good when it comes to writing and talking.
let's go; what we are going to do is flash the ROM with aan included ROOT, with the posibility of wiping our device.
I remind you that: **I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE OR YOUR COMPUTER.**
**I RECOMMEND CHARGING YOUR BATTERY TO 100%**
**I ALSO RECOMMEND YOU TO MAKE A COPY OF ALL YOUR DATA**
YOU WILL MISS YOUR GARANTY IF YOU ROOT YOUR DEVICE**
​
First step: DOWNLOAD THE ROM Through this link and place it in your desktop.
2. you will also have to download ODIN 3​
3.in Developer options, activate the USB Debugging option (Settings --> Developer options --> USB Debugging
Ok, you have to start ODIN and you have to get your device in Downloading Mode. (you will do this by shuting it off. and then pressing *VOLUME DOWN KEY*+*HOME KEY*+*POWER KEY*. when you do that you should press the volume up key) When you are in Downloading mode you should connect your device to your PC.
4. Once synchronized, with Odin, you have to select "OPEN" where it says PDA. select the archive you downloaded before. (the one with the name *I8190XXALK6_I8190XEFALK1_HOME_ROOTED.tar.md5*) (you have to uncompress that item before using it)
5. then you press start in Odin, and wait 'til the instalation finishes. the your device should reboot and odin should show a message saying PASS!
6. then you should be able to boot your device like you do normally.
EXTRA STEPS JUST IF YOU HAVE ANY ERROR​
1. if you cant boot, you will need to WIPE your device instaling this archive and use it like in step 4 through the PDA button.
2. if you still have any problem, you should install this following step 4.
how your device should look like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any problem or suggestion, please comment and thank.

This will install an older December rom! I'm afraid it's a step back, and bad advice.
Most countries have moved on from the LL2 rom in that file.
The instructions also mention the LK6 rom, which is even older, and not attached above.

this is avicoh first rooted rom and it was posted here on the forum long ago. I dont know why u reposted, to be honest i wayted for u to post but thought u come up with another solution that doesnt include Odin.
Best regards,

Yeah this isn't anything new, I and everyone here thought there was some kind of new ROOTING method. The Rom is already Rooted.
Sent from my GT-I8190 using xda premium

This has been covered before in the correct forum. Read before posting.

Posted in the wrong topic, my apologies to mod's.

Failed to install Aroma file manager on Samsung S5

Hello. This is my first post on this forum so please correct me should i post this in the wrong cathegory or use wrong tags etc
I followed the straight-forward guide i find here: http://forum.xda-developers.com/showthread.php?t=1646108
Using the recovery mode on a Samsung S5 i have the option to "Apply update from external storage" and i find the .zip file under this tab and if i try to apply the update i get the following message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've been trying this three times but i get the same error. I tried to search if other experienced the same problems but i found no similar threads.
Fyi this is on a non-rooted S5. It belonged to my grandmother which recently passed away and we are stuck trying to retrieve the photos on the device and this seemed like the best way. If there is any other way to retrieve these photos from a S5 with a pattern lock i will gladly accept any suggestions USB Debugging is obviously turned off on this phone -_-
Thank you!

You need root, a custom recovery and a terminal emulator as it seems to do this. Btw i`am sorry for your grandmother. Best is to flash a custom recovery with Odin, flash the latest superSU.zip in recovery . Reboot and install a terminal emulator from Play and follow the guide. Turn on usb debugging too.

gee2012 said:
You need root, a custom recovery and a terminal emulator as it seems to do this. Btw i`am sorry for your grandmother. Best is to flash a custom recovery with Odin, flash the latest superSU.zip in recovery . Reboot and install a terminal emulator from Play and follow the guide. Turn on usb debugging too.
Click to expand...
Click to collapse
Thank you for quick response
I am however very new to the the concept of rooting, and im not sure what all those programs you just mentioned are and how i use them
Could you post me a link to what programs i need, and exactly how i use them?

LG Leon LTE Root Method EASY! [MetroPCS Only]

[Read before proceeding]
This root method will only work on MetroPCS version of the LG Leon! Do test other devices at your own risk[not held liable]
Requirements:
Android Version: 5.1.1 *not so sure for eairler versions of Lollipop*
Software Version: MS34510f and Under
Enough space for app extraction [About 50MB]
Like always, before modifying the system MAKE A BACKUP!
I WILL NOT BE HELD RESPONSIBLE IF ANYTHING GOES WRONG WITH YOUR DEVICE! PROCEED WITH CAUTION!
Hello guys,
By far, for me this is one of the most simplest ways of rooting this phone. Lets get started
BTW All Downloads Below
1. Download KingRoot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Extract ZIP package with app desired or use a desktop, then place files onto phone
3. install the APK, and ignore any warning pop-ups
4.Open the app upon completion of app
5. You will be presented with the main screen saying no root avaliable, CLICK ON TRY TO ROOT
6. App will now start executing root
*May be slow so give it time
*Make sure to allow blocked apps if presented with a pop-up
7.If all went well you will be presented with a ROOT SUCCESSFUL screen OR phone will restart and you will have root
***At this point DO NOT request or run any apps that require root until the device is restarted.
8. Enjoy Root!
-If root is not accessible upon restarting, go into KingUser Su and click on REPAIR ROOT
-I do not know how to replace KingUser with SuperSU Sorry!
Goodluck!
Proof:
KingRoot APK: https://drive.google.com/file/d/0B9y1pDvJBE4nVk4wYlhCNjc4UkE/view?usp=sharing
KDZ Firmware MS34510f(METROPCS ONLY) : https://drive.google.com/file/d/0B9y1pDvJBE4nTEFFLXFraDgxOTg/view?usp=sharing
Firmware can be used for recovery purposes, a backup, and here for convinience!

[ROM][PORT]SmartisanOS for YUNIQUE by xinkid [Experience]

I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Click to expand...
Click to collapse
Description:
This ROM is based on 32Bit stock rom.
ROM is based on Smartisian OS 2.6.2 , It 's an Experience Edition
Fix audio camrea sensor compass and so on.
LTE/3G/GMS call data_network and communication module works well.
WIFI BT works.
SuperSU root.
Readjust the Launcher Resolution.
Add Easytouch .
Language:English Support.
Very Very Important:
After power on the devices , plz launch EasyTouch app.
Then, open Settings --- Advenced Settings --- Auxillary Functions --- EasyTouch --- On .
SmartisanOS Official Introduction ( Recommend ):
http://www.smartisan.com/jianguo/#/os
Known Issues:
No critical bugs.
BUG report & about me：
Facebook
Twitter
Google+
Downloads(all version):
[SmartisanOS] released on KingFlasher !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install Method:
Recommend to use King Flasher: http://tfile.kingflasher.com/soft/kingflasher_setup.exe
1. Connect your phone to computer with USB cable and open USB debbuging.
How to open USB debbuging: Settings > About device > Tap “BUILD MUNBER” 7 times > Back to Settings > Developer options > Select “USB Debbuging”.
2. Please open King Flasher and choose a ROM you like, then click “Flash”.
3. Wait for downloading ROM.
4. After the download finished, King Flasher will flash your phone automaticlly. It will take about 5-10 minutes to finish.
5. Your phone will reboot to the new system when it finish.

link?
can you provide me the link?

Please help me for apgrade or root 8227L_demo

Hello my friends. I have an android hand unit like the one on the link.
https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
I need to do firmware update οr to rout this HU.
Here's a difference in the model's name... The factory information is different from the CPU-Z information.
The seller of course does not help. He forcefully responds to messages and does not understand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only ask you 2 things.....Do a firmware upgrade or root the device.
The main problem is the radio application. While I have English as my primary language, the radio only holds Polish and does not have a good signal.
Please Help me

any help?

Look for this instruction in 4pda.ru forum https://4pda.ru/forum/index.php?showtopic=936535&st=11880
Easy! For some reason, it is not described in detail and simply here.
I will try:
- download our scatter file to the computer (laptop);
- Download FlashTool with SP_Driver_v2.0 (firewood) and install on the computer (laptop);
- Download SuperSU.zip and throw in the root of the body;
- Download Android Terminal and install on the body;
- Download also TWRP, this one came up to me, the rest mirrors;
- rename TWRP to recovery.img - this is important!
- we throw recovery.img next to our scatter file;
- open FlashTool, load our scatter file, see that the checkmark is only on recovery! ;
- further according to the scheme as described on the forum - click Download, connect the switched off body and wait for success!
Success will be, of course, if the firewood is already standing and the dad-dad cord is whole.
- Now you need to reboot into recovery. to do this, turn on the body, launch Android Terminal, give the reboot recovery command;
- from TWRP we put zip SuperSU;
- ALL! We reboot and rejoice.
I hope it turned out simple and clear. Good luck!
Click to expand...
Click to collapse

Can I switch to a different luacher or operating system?