Related
So.... Pokemon Go has a lot to answer for......
I have run into a really strange problem when trying to install an OTA on my *unrooted* Oneplus 2. I have been trying to fix this for days but I have completely run out of ideas.
I originally had a working stock Oxygen 3 (Marshmallow) rom with TWRP recovery on my device (not sure of the version). The device was rooted and apart from not being able to install OTAs, I was fairly happy with the setup. Then along came the Pokemon GO update that banned rooted devices. Ok, "big deal" I thought. I was quite content playing Ingress instead (a far better game by the way that doesn't rely on a "pay to win" structure). I really wasn't too worried but then I found out about "systemless root" and "Magisk". I thought that if I installed this correctly I could still play a bit of Pokemon GO when I wanted to and could toggle a root button in Magisk Manager to install OTAs when they became available.
This is where the problems started.
I followed a guide on how to unroot and install Magisk and "Phh's Superuser". The problem was that the Phh Superuser was being denied permissions for Magisk Manager, there were no pop up notifications prompting me to give it access, just toast notifications. I couldn't for the life of me figure out how to give it permission so the "enable root" slider button kept sliding back, not allowing root. This is when I used SuperSU ver 2.76 (Magisk version) and it seemed to work fine. I now had a stock Marshmallow rom with TWRP and Magisk Manager all working exactly how they should be. I could toggle root and play Pokemon GO, then return to a rooted state when I needed to.
"Awesome, mission accomplished." I thought. Now I just need to toggle root off, download the latest OTA and install it through Flashfire.
First I made a complete nandroid backup (as I've done with other devices many times before) through TWRP. I even copied the backup folder to my PC in case something went wrong.
Well, this is when the nightmare started.
The first mistake I made was to use Flashfire when it clearly stated that Oneplus devices were currently untested. Not sure if it was a big issue or not, but it was a mistake none the less. The second mistake I made was to not stop the stock recovery being replaced when prompted before the reboot. I assumed (and it even states in the app) that the custom recovery should be reverted back to the stock recovery when attempting to apply OTA updates.
So I went ahead and rebooted, waiting for the OTA to install. I'm fairly sure from memory that it went into the stock recovery, flashed the OTA and restarted.
This is when the phone soft bricked.
"Oh well, that is why I made the backup." I thought.
I reflashed TWRP in fastboot mode and attempted to restore my backup. No dice, the phone was still soft bricked.
(And by "soft bricked" and "boot looping" I mean the Oneplus logo was in the middle of the screen, "Powered by Android" was at the bottom and the two blue LEDs for the buttons either side of the fingerprint scanner/home button remained on. This for me was the tell tale sign of the soft brick because these two light go off after a few seconds after rebooting usually.
So from here I have tried EVERYTHING. All I really want now is a working stock (rooted) Marshmallow rom with TWRP. I have downloaded many different full rom zips and attempted to flash them through TWRP with no success, I have returned to stock recovery and tried flashing signed roms with no success, I've even tried flashing the official CM13 rom for Oneplus 2 (with the correct GAPPs and kernel) through TWRP with no luck.
But here is where it gets interesting......
There are a few things that are really weird...
1. I have always been able to get into Fastboot mode and ADB and Fastboot commands "work".
* Operations succeed but don't stick (for example trying to flash TWRP versions 3.0.2-1 and 3.0.2-2 through Fastboot mode result in no recovery being there at all.
2. I can flash TWRP recovery though Fastboot mode but ONLY VERSIONS 3.0.2-0 and lower. I can also successfully flash the stock recovery.
3. I can flash OxygenOS 2.2.1 but NOT ANY VERSION RELEASED AFTER THAT. Doing so results in the soft brick "bootloop" I mentioned earlier.
4. Attempting to flash the official CM13 rom for Oneplus 2 doesn't work either. Originally I got the error 7 message, but after editing "Updater-script" in the rom and re-zipping, the process seemed to work fine in TWRP but the reboot gave me... you guessed it... a softbrick.
I have flashed custom roms on a few different devices before so I'm not a COMPLETE newbie when it comes to this stuff, but I am by no means a developer or even anything close to one. I have bricked this phone in the past (long story, involved getting it without an invite and it being shipped to me with spyware on it) but I used a guide very similar to this and it worked a treat.
www(dot)androidbrick(dot)com/unbrick-oneplus-one-two-3-qualcomm-hs-usb-qdloader-9008
So, thinking that this process would format all partitions and start me from scatch I tried it. It worked fine but I was still unable to upgrade from Oxygen OS 2.2.1 or install TWRP versions 3.0.2-1 or 3.0.2-2.
I have tried all sorts of things. I have wiped, flashed and wiped again. Factory resets, dirty flashes, clean flashes.... everything. All sorts of different sources for the TWRP images and Oxygen roms... nothing seems to work.
It's just so weird considering it's not a hard brick... just a soft brick.
So I really need my phone so I am sitting on this current build because it is the only one that works.
Here are some details of the current build I am using. (using CPU-Z app)
Model: Oneplus 2 (ONE A2001)
Android version: 5.1.1
Oxygen OS version: 2.2.1
Bootloader: Unknown
Build ID: ONE A2001_14_160226
Java VM: ART 2.1.0
OpenGL ES: 3.1
Kernel Architecture: aarch64
Kernel version: 3.10.49-perf+ (56)
Root access: Yes
Super user app: SuperSU Free v2.46 (Chainfire)
OEM unlocking: Enabled
USB debugging: Enabled
And these are some of the ZIPs and IMGs that refuse to be flashed to my device.
TWRP-3.0.2-1-oneplus2
TWRP-3.0.2-2-oneplus2
Grarak's TWRP recovery IMG for Oneplus2 (modified to install CM13) according to this guide:
missingtricks(dot)net/oneplus-2-official-cyanogenmod-13
cm-13.0-20160924-NIGHTLY-oneplus2
OnePlus2Oxygen_14_OTA_019_all_1606041303_bd42fc5cc5cc4ab2
And also my TWRP backup named 2016-09-16--09-44-09
I am really at a loss as to what to do next. ANY help ANYONE could give me would be greatly appreciated. I have been all over the net looking for ways around this bt have had no luck.
As I've said, I'm not a huge tech head, but I'm not a newbie either. The only thing I can think of is that somehow one of the partitions (maybe boot? ) may have been corrupted somehow when messing around with systemless root. But I don't know how considering it's "systemless". If anyone knows how to check for corrupted partitions on the Oneplus 2 please let me know and I'll try it. Maybe formatting these partitions might help (????), but I don't want to permanently brick my phone.
But I don't know how I've got this particular build working if one of the partitions has been corrupted. And the corrupted partition thing is just a guess.....
Please, anyone, someone point me in the right direction. Again, any and all feddback is welcomed and would be very much appreciated.
This is all Pikachu's fault.
Kamakiriash said:
A very long post...
Click to expand...
Click to collapse
The normal way too update from OOS 2 to OOS 3 is:
Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
Reboot recovery via TWRP so that you now have a recovery that's compatible with the new bootloader
Wipe data, cache & dalvik-cache (but not internal storage)
Flash the OOS 3 signed flashable zip again to update the system
Flash one of the modified SuperSU zips if you want root
Reboot system
All the files you need are in post #1 of this thread.
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Kamakiriash said:
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Click to expand...
Click to collapse
Glad you're sorted.
Not sure about Magisk as I've never used it.
CM13 is OK but whether it's worth you moving to it is your choice. Personally, I prefer TipsyOS!
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Click to expand...
Click to collapse
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
Click to expand...
Click to collapse
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Aood said:
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Click to expand...
Click to collapse
I don't have a OP2 anymore but that post was seven months ago and the instructions worked for numerous users.
Don't enable zip signature verification in TWRP - it's unnecessary.
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
thanx for replay Spannaa,
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
Click to expand...
Click to collapse
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Aood said:
thanx for replay Spannaa,
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Click to expand...
Click to collapse
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Click to expand...
Click to collapse
Yes, rebooting recovery "directly from TWRP"
and bootloader loader is unlocked,..
anyway it's not important to fix the phone, it's almost one year since last time I use it, yesterday I saw it in the drawer and try to figure out the issue..,
Hey, today Supersu wanted to update from the play store so i updated it, and once it was done it asked to restart the phone like usual, i restarted and when it was done booting supersu said the phone was no longer rooted. Not exactly sure what to do to fix this, i am on the unlocked V20 (US996) i am not running any rom, just stock and root. Hopefully you guys can help me get root back on my phone, thank you.
If you have TWRP installed , try to flash a supersu zip file for the update or one from a rom in the development thread . I just updated myself but didn't reboot yet.
I think the Playstore update screws it up.
You need to search the update .zip and flash it in recovery.
SuperSU 2.80 and 2.81 are both broken. Flash 2.79 SR3 in TWRP and root will be back. Worked for me anyway.
P.S. Don't re-update through the Play Store until they fix the issue, just stay with 2.79 SR3 for now.
Bubba Fett said:
If you have TWRP installed , try to flash a supersu zip file for the update or one from a rom in the development thread . I just updated myself but didn't reboot yet.
Click to expand...
Click to collapse
I downloaded the supersu zip from chainfire's site supersu 2.46. Flashed it and then rebooted, however the boot never ended, it doesn't seem to be bootlooping it just gets to the final boot animation and sits on that, waited 10 minutes and it still never made it to the home screen, trying to figure out how to get into twrp from here.
Okay, i found this thread https://forum.xda-developers.com/v20/how-to/booting-recovery-t3488099/page2 which states that pressing the power and volume down button in a certain way will take me to a white screen asking me to reset my phone and that if i have twrp installed (Which i do) it will take me to twrp saying yes, should i do this to get to twrp and then flash Supersu 2.79 as jeston suggested? And should i wipe dalvik/cache after flashing?
Okay i fixed it, entered the bootloader by doing the power and volume button factory reset thing i found and then flashed supersu 2.79, then wiped the dalvik/cache and rebooted, it bootlooped once but it started after that and is working perfectly! Thank you all for your help!
Good to see you're sorted now.
meccano300 said:
Hey, today Supersu wanted to update from the play store so i updated it, and once it was done it asked to restart the phone like usual, i restarted and when it was done booting supersu said the phone was no longer rooted. Not exactly sure what to do to fix this, i am on the unlocked V20 (US996) i am not running any rom, just stock and root. Hopefully you guys can help me get root back on my phone, thank you.
Click to expand...
Click to collapse
I had the same problem. Lost root after allowing supersu to update from playstore.
Just flashed supersu2.79.zip in twrp and was rooted again.
I lost root after updating SuperSU. I don't think it was from the Play Store, it was a SuperSU notification that kept bugging so I let it do it's thing and then lost root after rebooting. I do not have TWRP because I have a locked bootloader (Samsung on Verizon). How do I get it back?
I've had my 6P since Nov of 15, and I have always run it with a stock rom that is rooted. I've used Heisenberg's guide since day one, and never run into any considerable trouble.
Today though, after not updating the rom for a while, I am running into two issues. I went from angler nmf26f to the most current one, n2g47o.
Thing 1 - after I install twrp through fastboot, I can load into it and everything is fine. However, after I reboot, I can no longer load it again. When I go into the bootloader and select Recovery, after a few moments I get a screen saying 'No command'
I have reinstalled twrp a few times but it has done nothing to help.
Thing 2 - Root is no longer working. I have installed the newest SuperSU through twrp and while the app is present on the phone, it says root undetected.
Any of you folks run into anything similar? The phone/rom works fine otherwise. Thanks!
I had the same issue from 7.0 and forward. SUpersu causes a bootloop even on a fresh rom. You could give Magisk a try it worked for me at least.
DirtyHennessy said:
I had the same issue from 7.0 and forward. SUpersu causes a bootloop even on a fresh rom. You could give Magisk a try it worked for me at least.
Click to expand...
Click to collapse
Thanks! I will try that.
Seamus1 said:
I've had my 6P since Nov of 15, and I have always run it with a stock rom that is rooted. I've used Heisenberg's guide since day one, and never run into any considerable trouble.
Today though, after not updating the rom for a while, I am running into two issues. I went from angler nmf26f to the most current one, n2g47o.
Thing 1 - after I install twrp through fastboot, I can load into it and everything is fine. However, after I reboot, I can no longer load it again. When I go into the bootloader and select Recovery, after a few moments I get a screen saying 'No command'
I have reinstalled twrp a few times but it has done nothing to help.
Thing 2 - Root is no longer working. I have installed the newest SuperSU through twrp and while the app is present on the phone, it says root undetected.
Any of you folks run into anything similar? The phone/rom works fine otherwise. Thanks!
Click to expand...
Click to collapse
Have you made sure to update your radio, bootloader and vendor to the most recent version? Make sure to also try flashing twrp again but do everything through fastboot flash commands on your pc.
Seamus1 said:
I've had my 6P since Nov of 15, and I have always run it with a stock rom that is rooted. I've used Heisenberg's guide since day one, and never run into any considerable trouble.
Today though, after not updating the rom for a while, I am running into two issues. I went from angler nmf26f to the most current one, n2g47o.
Thing 1 - after I install twrp through fastboot, I can load into it and everything is fine. However, after I reboot, I can no longer load it again. When I go into the bootloader and select Recovery, after a few moments I get a screen saying 'No command'
I have reinstalled twrp a few times but it has done nothing to help.
Thing 2 - Root is no longer working. I have installed the newest SuperSU through twrp and while the app is present on the phone, it says root undetected.
Any of you folks run into anything similar? The phone/rom works fine otherwise. Thanks!
Click to expand...
Click to collapse
Flash root in TWRP before your first boot into the stock rom. On Nougat 7.0+, stock recovery replaces TWRP on boot if you do not. This solves both of your problems. When you clean flash and install a custom rom, with or without root, TWRP will remain. If you just use stock unrooted, then you should flash root before first boot each month when you update.
Sent from my Nexus 5X using Tapatalk
SuperSu 2.80 & 2.81 broke root for most phones - including mine. I had to flash 2.79 SR3 to get root again. Chainfire released 2.82 this morning but I haven't tried it yet.
https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
If you boot to twrp first time mount system and use the filemanager to delete recovery-from-boot.p under system. Use magisk instead of supersu for root.
I can't seem to find any rooting method for C432B380 software. Is there any step-by-step guide for this version? I'm currently on fully stock firmware, and I haven't unlocked my bootloader yet.
SteadyDisorder said:
I can't seem to find any rooting method for C432B380 software. Is there any step-by-step guide for this version? I'm currently on fully stock firmware, and I haven't unlocked my bootloader yet.
Click to expand...
Click to collapse
Well, ask for unlock code - that's the first step.
I am interested in this as well, as from what I see some people seem to run into problems. Say one is on Nougat C432B380 (I'm B381) and has now got the unlock code. What then? First of all, unlocking the bootloader will result in a reset, clean C432B380 installation, right? Or will there be any need to flash something else?
EDIT: I passed the unlock part following the Guide, and ended up with a clean Nougat installation as I thought. Now what? In the OldDroid TWRP thread I see many people having trouble...
Makishima said:
I am interested in this as well, as from what I see some people seem to run into problems. Say one is on Nougat C432B380 (I'm B381) and has now got the unlock code. What then? First of all, unlocking the bootloader will result in a reset, clean C432B380 installation, right? Or will there be any need to flash something else?
EDIT: I passed the unlock part following the Guide, and ended up with a clean Nougat installation as I thought. Now what? In the OldDroid TWRP thread I see many people having trouble...
Click to expand...
Click to collapse
I recommend staying away from any custom roms for now as all seem to have problems... you say you have an unlocked bootloader, then next step would be flashing a custom recovery, then from there... flashing supersu... try not to do much more than that and accept a fully functioning rooted phone better than getting a squichy camera or whatever from custom roms.... wait till they get stable
Moemen Shahawy said:
I recommend staying away from any custom roms for now as all seem to have problems... you say you have an unlocked bootloader, then next step would be flashing a custom recovery, then from there... flashing supersu... try not to do much more than that and accept a fully functioning rooted phone better than getting a squichy camera or whatever from custom roms.... wait till they get stable
Click to expand...
Click to collapse
I was not planning to install a custom ROM, I just want root, mainly for Viper4Android and some other things, but after reading the whole OldDroid TWRP thread I saw some people reporting problems with bootloops and whatnot, mainly after flashing SuperSU. Is flashing TWRP and then EliteKernel and rooting with phh or Magisk preferable? I just got my device back from the Huawei services, with a new board and everything and I don't want to ruin the stock installation again, so I am trying to be a bit more certain before I do anything.
Thank you for replying.
EDIT: Okay, so what I did was flash the latest OldDroid TWRP through fastboot and then I booted into recovery and flashed the latest Magisk (v13.3 I think). Now I have root and everything seems to work. So happy.
EDIT2: It seems that although it says I have root, I can't actually do anything with it, e.g. I can't uninstall system apps with Link2SD even though it says it was successful - reboot, still there - and the modules won't appear even after installing.... So, I don't know what's wrong.
Makishima said:
I was not planning to install a custom ROM, I just want root, mainly for Viper4Android and some other things, but after reading the whole OldDroid TWRP thread I saw some people reporting problems with bootloops and whatnot, mainly after flashing SuperSU. Is flashing TWRP and then EliteKernel and rooting with phh or Magisk preferable? I just got my device back from the Huawei services, with a new board and everything and I don't want to ruin the stock installation again, so I am trying to be a bit more certain before I do anything.
Thank you for replying.
EDIT: Okay, so what I did was flash the latest OldDroid TWRP through fastboot and then I booted into recovery and flashed the latest Magisk (v13.3 I think). Now I have root and everything seems to work. So happy.
EDIT2: It seems that although it says I have root, I can't actually do anything with it, e.g. I can't uninstall system apps with Link2SD even though it says it was successful - reboot, still there - and the modules won't appear even after installing.... So, I don't know what's wrong.
Click to expand...
Click to collapse
stay away from magisk if you want something stable... at least my opinion. Magisk is fine, the only add it adds, is magisk hide, which seems to keep failing now for most people. I'm suffering through it now and switching to supersu... try finding the correct way to remove magisk root and go the chainfire's supersu
Moemen Shahawy said:
stay away from magisk if you want something stable... at least my opinion. Magisk is fine, the only add it adds, is magisk hide, which seems to keep failing now for most people. I'm suffering through it now and switching to supersu... try finding the correct way to remove magisk root and go the chainfire's supersu
Click to expand...
Click to collapse
I restored a backup of the boot partition I had made when I first flashed TWRP which seems to have deleted Magisk, the app told me it was not installed (even though I see now a Magisk folder in data...) and then flashed Super SU, but I still can't delete system apps and having trouble with Viper*. But maybe it's not SU's fault. I don't know. I flashed v2.79, I previously had trouble with the newest versions.
Also, I had not activated the Hide function, I think.
*It is driving me crazy! Why does it not work? Supposedly I am root, I even deleted the system apps with the file managers but when I exited and reentered the folder they were there again. What is going on?... Wait... Is this normal, is it because it is system-less root?
To root any nougat fw:
1)unlock bootloader. You have to get unlock code from huawey and then in fastboot mode do: "fastboot oem unlock yourcode"
2)flash twrp recovery, i suggest you the hassan's recovery https://www.androidfilehost.com/?fid=745425885120756473
3)in fastboot mode do "fastboot flash recovery nameoftherecovery.img
4)reboot in recovery and flash this supersu
It is the 2.82 for emui 5 without loop mount,is perfect for p9lite https://www.androidfilehost.com/?fid=817550096634776377
So I tried updating to Oxygen is 5.0 ran into an install issue, stuck in boot loop. Lucky I had done a Nandroid back up and restore everything. The other night I decided to update to 5.1.1 thinking why not get Android 8.1.0 on my AWESOME phone. Downloaded update, placed in internal storage, booted into TWRP to do a Nandroid back up (due to issues with past update). Back up failed needed to clean drive. So I decided, phone works in Android 7.1.1, why can't what's not broken. Rebooted phone and somehow the update activated. I freaked since last time it failed and not stuck in a loop. This time update was successful but still got stuck in a boot loop. I plugged my phone to my computer and noticed all my files were gone on their install storage, no files / foldersI recognized (e.g. DCIM, DATA, DOWNLOAD, etc). Emailed One Plus and chatted with them. TWRP was gone and was back on stock recovery. Since all was lost I was asked to "Erase All". I did, rebooted and I'm now on 8.1.1 but all my stuff was lost. So I've done since searching and found FlashFire do to a Nandroid backup but need root. So my question is...
Can I re-root my phone without using TWRP but stock recovery and use FlashFire for my back ups? I am not going to flash custom ROM but if I need to flash something, wouldn't stock ROM flash anything on my phone (Magisk)?
If so, can anyone provide me with assistance on re-rooting my phone without TWRP.
Thank you
As far as i know you can't flash anything with stock recovery so you can't root. After flashing the stock os is normal that twrp is been erased by the stock. Just re flash the twrp. I mean, maybe i didn't get the problem, why you can't reflash twrp? If you do that flash twrp codeworx Universal with fastboot in the bootloader, boot in twrp, wipe cache/dalvik, flash magisk 15.3, wipe cache/dalvik, reboot system, update magisk to 16 with the app. I do that way and it worked
Hi
To root your OnePlus 5, you must to follow carefuly the steps below and take your time.
1 - Make a full backup of your data
2 - Unlock the bootloader (Note that'll erase your phone)
3 - Install another recovery : TWRP. This one : https://sourceforge.net/projects/ch...-20180414-codeworkx-cheeseburger.img/download
4 - Flash the full rom Oxygen OS 5.1.1 : http://otafsg.h2os.com/patch/amazon...23_OTA_034_all_1804201219_3824995916a49ee.zip
5 - Install magisk : https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
6 - Clear cache / Dalvik
7 - You're all done, reboot the phone
8 - Once your phone has booted up, install magisk manager : https://github.com/topjohnwu/MagiskManager/releases/download/v5.7.0/MagiskManager-v5.7.0.apk
Check this tread, that'll help you as well : https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
vanzant83 said:
As far as i know you can't flash anything with stock recovery so you can't root. After flashing the stock os is normal that twrp is been erased by the stock. Just re flash the twrp. I mean, maybe i didn't get the problem, why you can't reflash twrp? If you do that flash twrp codeworx Universal with fastboot in the bootloader, boot in twrp, wipe cache/dalvik, flash magisk 15.3, wipe cache/dalvik, reboot system, update magisk to 16 with the app. I do that way and it worked
Click to expand...
Click to collapse
Hello, thanks for the info and yes, I did try flashing Magisk with stock recovery, while waiting for a reply and can confirm installation failed. So if I reflash TWRP, flashing Magisk using TWRP will work. Therefore, do you have instructions (step-by-step) on how to install TWRP. I have downloaded the latest TWRP image from their website (twrp-3.1.1-1 cheeseburger) onto my desktop. Bootloader is already unlocked as I was previously rooted under Android 7.1.
Thank you.
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
This is the official guide step by step, scroll down until you find "flashing twrp" if you had already unlocked the bootloader ( you already did that right??? xD). Anyway about the recovery and magisk version. The guys in the 5.1.1 thread advised to flash magisk 15.3 instead the 16 and only after the system reboot to make the upgrade to 16 with magisk app (dunno why). But when i tried to do that the last version of twrp (3.1.1-1) failed the flash. So i flashed the twrp 3.1.1-0-universal and 15.3 magisk. I can confirm this combination work, i can't tell for other combinations.
vanzant83 said:
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
This is the official guide step by step, scroll down until you find "flashing twrp" if you had already unlocked the bootloader ( you already did that right??? xD). Anyway about the recovery and magisk version. The guys in the 5.1.1 thread advised to flash magisk 15.3 instead the 16 and only after the system reboot to make the upgrade to 16 with magisk app (dunno why). But when i tried to do that the last version of twrp (3.1.1-1) failed the flash. So i flashed the twrp 3.1.1-0-universal and 15.3 magisk. I can confirm this combination work, i can't tell for other combinations.
Click to expand...
Click to collapse
Hello, I finally got some time to re-root my phone and was reading the instructions you provided and clicked on the download but they are TWRP 3.2.1.x and Magisk 16. Do you have the links for the files you used
Grazie
jmoricone said:
Hello, I finally got some time to re-root my phone and was reading the instructions you provided and clicked on the download but they are TWRP 3.2.1.x and Magisk 16. Do you have the links for the files you used
Grazie
Click to expand...
Click to collapse
Sorry man i typed wrong, the one i meant was 3.2.1-0 Universal codeworkx, the fourth from up to down. About 15.3 magisk i dunno where you can find It, maybe try some google research, otherwise i can send It to you by email, is a little file
Try this link, get the ZIP file from the version you want: https://github.com/topjohnwu/Magisk/releases/
In case you need, this the official section: https://forum.xda-developers.com/apps/magisk
vanzant83 said:
Sorry man i typed wrong, the one i meant was 3.2.1-0 Universal codeworkx, the fourth from up to down. About 15.3 magisk i dunno where you can find It, maybe try some google research, otherwise i can send It to you by email, is a little file
Click to expand...
Click to collapse
Hey there, sorry for the late response..but thank you for the assist..phone is rerooted..all is good..thanks again