Related
1. FLASH BOOT.img, CUST.img, RECOVERY.img, SYSTEM.imgs from B370 via MULTI-TOOL
2.FLASH BOOT.img,RECOVERY.img via fastboot from given link
(fastboot flash boot boot.img, fastboot flash recovery recovery.img)
3.PUT B309 UPDATE.APP in dload folder in SD CARD
4.BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED
5.When u get installation screen MOUNT SD card As Far As Possible
6.After that PUT B370 UPDATE.APP dload folder in SD CARD(small pause at 19%)
7.REPEAT 4&5 steps
8. LINK hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt
ashish12 said:
1. FLASH BOOT.img, CUST.img, RECOVERY.img, SYSTEM.imgs from B370 via MULTI-TOOL
2.FLASH BOOT.img,RECOVERY.img via fastboot from given link
(fastboot flash boot boot.img, fastboot flash recovery recovery.img)
3.PUT B309 UPDATE.APP in dload folder in SD CARD
4.BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED
5.When u get installation screen MOUNT SD card As Far As Possible
6.After that PUT B370 UPDATE.APP dload folder in SD CARD(small pause at 19%)
7.REPEAT 4&5 steps
8. LINK hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt
Click to expand...
Click to collapse
What version is B309?
B309 is downgrade package use for downgrade 3.0 to 2.3
This method works for me when I brick my phone in lollipop
Sent from my H60-L04
For this,i need to unlock my bootloader?
Sent from my H60-L04 using XDA Free mobile app
ashish12 said:
1. FLASH BOOT.img, CUST.img, RECOVERY.img, SYSTEM.imgs from B370 via MULTI-TOOL
2.FLASH BOOT.img,RECOVERY.img via fastboot from given link
(fastboot flash boot boot.img, fastboot flash recovery recovery.img)
3.PUT B309 UPDATE.APP in dload folder in SD CARD
4.BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED
5.When u get installation screen MOUNT SD card As Far As Possible
6.After that PUT B370 UPDATE.APP dload folder in SD CARD(small pause at 19%)
7.REPEAT 4&5 steps
8. LINK hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt
Click to expand...
Click to collapse
Hello, H60 - L04 upgrade emui3.1 'how did you do that?
Sent from my H60-L04 using XDA Free mobile app
no other way to downgrade 3.0?
Probably not.. But this method works perfectly!!
Thanks Ashish!
shubham1120 said:
Probably not.. But this method works perfectly!!
Thanks Ashish!
Click to expand...
Click to collapse
:good:
shubham1120 said:
Probably not.. But this method works perfectly!!
Thanks Ashish!
Click to expand...
Click to collapse
but needed the unlocked bootloader. I not want unlock..
Becksman1991 said:
but needed the unlocked bootloader. I not want unlock..
Click to expand...
Click to collapse
so u should wait for H60-L04 rollback
Thanks ashish this method works perfectly.
why do you all want downgrade? any issue with lollipop?
mrengineer said:
why do you all want downgrade? any issue with lollipop?
Click to expand...
Click to collapse
Emui 3.1 not same emui 3.0. I like emui 3.0. And launcher a bit lagg. I wait rollpack
Becksman1991 said:
Emui 3.1 not same emui 3.0. I like emui 3.0. And launcher a bit lagg. I wait rollpack
Click to expand...
Click to collapse
major difference between 3.1 and 3.0?
mrengineer said:
major difference between 3.1 and 3.0?
Click to expand...
Click to collapse
all are same as EMUI 3 except few new feature added
Life saviour bro
ashish12 said:
1. Flash boot.img, cust.img, recovery.img, system.imgs from b370 via multi-tool
2.flash boot.img,recovery.img via fastboot from given link
(fastboot flash boot boot.img, fastboot flash recovery recovery.img)
3.put b309 update.app in dload folder in sd card
4.boot device with 3buttons unplugged from usb and sd card unmounted
5.when u get installation screen mount sd card as far as possible
6.after that put b370 update.app dload folder in sd card(small pause at 19%)
7.repeat 4&5 steps
8. Link hxxps://drive.google.com/file/d/0bzujzi5oevirwwxylxnjrgnwb3c/view?usp=sharing
replace xx with tt
Click to expand...
Click to collapse
u made my day......
smile.tasleem said:
u made my day......
Click to expand...
Click to collapse
:good:
i am using miui v6 i want get back emui 3.0 how to do that ?
u can giv me facebook ?
video please x.x
cant imagine how to do this with 19%(small pause)
Venipa said:
video please x.x
cant imagine how to do this with 19%(small pause)
Click to expand...
Click to collapse
Hey! You need not worry about the pause and stuff. Just follow the procedure given(i.e. when to insert SDcard, which files to flash etc)
hello everyone, so i had to go back to stock on my kiwi L21 and i did the following:
1. downloaded my official update from hihonor
2. extracted the downloaded file and got the UPDATE.APP file
3. downloaded this perl script by marcominetti.
4. runed the script on my linux machine which extracted the recovery.img , system.img and boot.img and some other stuff also.
5. at this point i didn't know what to do so i sticked with the safe side and just flashed the recovery using fastboot thinking that if everything went bad i can always reflah TWRP
6. recovery was flashed sucessfully and i tested it but u still was able to use CM 13 which was previously installed
7. i created a folder on my internal memory called dload and then copied the UPDATE.APP file to it (basically after extracting the downloaded update from hihonor the UPDATE.APP was already inside dload folder)
8. i turned off my phone
9. press vol up + vol down + power wait for the logo and released only power.
10. the update process started and viola` i was on stock back.
THIS IS NOT A GUIDE AS AM NOT AN EXPERT BY ANY MEAN i just wanted to share it with you as i have some thoughts on it.
is flashing the recovery really a must or even if am on TWRP i can still vol up + vol down + powe thing ?
can i just flash system and boot using fastboot from the extracted image ? probably yes but i won't be a clean flash i think ...
when i see in the forums CLEAN FLASH what is it actually refers to? a falsh after deleting any exsisting file systems ??
if you want to do vol+ and vlo- and power thigy, you must be on stock recovery
thilak devraj said:
if you want to do vol+ and vlo- and power thigy, you must be on stock recovery
Click to expand...
Click to collapse
what about flashing system.img and boot.img ?
Elbadri1 said:
what about flashing system.img and boot.img ?
Click to expand...
Click to collapse
no need of that
thilak devraj said:
no need of that
Click to expand...
Click to collapse
so a guide valid for any varient of honor could be :
1. download your official update from hihonor
2. extracted the downloaded file and got the UPDATE.APP file
3. downloaded this perl script by marcominetti.
4. run the script and extract the recovery.img
5.flash the recovery using fastboot
6. create a folder in the internal memory called dload and then copy the UPDATE.APP file to it.
7. i turned off my phone
8. press vol up + vol down + power wait for the logo and released only power.
9. the update process started and viola` stock is back.
Elbadri1 said:
so a guide valid for any varient of honor could be :
1. download your official update from hihonor
2. extracted the downloaded file and got the UPDATE.APP file
3. downloaded this perl script by marcominetti.
4. run the script and extract the recovery.img
5.flash the recovery using fastboot
6. create a folder in the internal memory called dload and then copy the UPDATE.APP file to it.
7. i turned off my phone
8. press vol up + vol down + power wait for the logo and released only power.
9. the update process started and viola` stock is back.
Click to expand...
Click to collapse
i dont know anything about perl script by marcominetti.
but, i do jump over and over bw stock and custom roms, what i do is,
i have a twrp backup of stock recovery.. so i just restore recovery from twrp and i will do that dload folder method
thilak devraj said:
i dont know anything about perl script by marcominetti.
but, i do jump over and over bw stock and custom roms, what i do is,
i have a twrp backup of stock recovery.. so i just restore recovery from twrp and i will do that dload folder method
Click to expand...
Click to collapse
this is the script a perl tool to extract/split the UPDATE.APP file
Elbadri1 said:
this is the script a perl tool to extract/split the UPDATE.APP file
Click to expand...
Click to collapse
works perfect , if you managed to extract recovery.img, flash it with fastboot, you r set for the dload method..
thilak devraj said:
works perfect , if you managed to extract recovery.img, flash it with fastboot, you r set for the dload method..
Click to expand...
Click to collapse
can i make a TWRP script that copies a stock rom to a created dload folder and then flashes recovery and reboots system into recovery mode to start the update process ?
any guides on how to make a TWRP script ?
el3ctrician said:
can i make a TWRP script that copies a stock rom to a created dload folder and then flashes recovery and reboots system into recovery mode to start the update process ?
any guides on how to make a TWRP script ?
Click to expand...
Click to collapse
you cannot make twrp scripts, as far as i know
Hello,
today I tried to downgrade from nougat to MM. After the MM Rom was installed, my phone only shows me the Huawei Brand. The phone does not start, it only shows huawei brand. How can I rescue my phone now ???? Please help
Edit:
If I press Power + VolDown it says PHONE Locked, FRP Unlock
I tried the rollback with this method:
http://www.stechguide.com/downgrade-huawei-p9-lite-from-nougat-to-marshmallow/
Volup + Power , Format data, Format Cache, Reboot
nitroax said:
Volup + Power , Format data, Format Cache, Reboot
Click to expand...
Click to collapse
That is unfortunately not helping. If I do so the phone restarts and the Huawei Boot Logo shows up, but I am not able to enter erevory or somethin else. Only thing working is fastboot when I press Volume down.
ndroid1562 said:
That is unfortunately not helping. If I do so the phone restarts and the Huawei Boot Logo shows up, but I am not able to enter erevory or somethin else. Only thing working is fastboot when I press Volume down.
Click to expand...
Click to collapse
Make sure you dont have the usb cable plugged when you try to enter recovery.
Have you tried flash the MM UPDATE.APP again ?
nitroax said:
Make sure you dont have the usb cable plugged when you try to enter recovery.
Have you tried flash the MM UPDATE.APP again ?
Click to expand...
Click to collapse
Yes I Trier without USB cable plugged in. What I recognised before the bootloop is: The flash of the rollback Version was successful but the phone was then already stuck in bootloop. So i don't even could install the real Version of MM.
Is there a possibility to install the stock Rom with fastboot? My bootloader is opened and I don't Kind if I lose all my data.
ndroid1562 said:
Yes I Trier without USB cable plugged in. What I recognised before the bootloop is: The flash of the rollback Version was successful but the phone was then already stuck in bootloop. So i don't even could install the real Version of MM.
Is there a possibility to install the stock Rom with fastboot? My bootloader is opened and I don't Kind if I lose all my data.
Click to expand...
Click to collapse
You should be able to put the MM update in dload folder of your sdcard, and use the 3 button method to flash it.
Otherwise use huawei firmware extractor to pull the system.img data.img boot.img from the update.app of the MM, and use fastboot flash system SYSTEM.img . Same thing for boot and data
nitroax said:
You should be able to put the MM update in dload folder of your sdcard, and use the 3 button method to flash it.
Otherwise use huawei firmware extractor to pull the system.img data.img boot.img from the update.app of the MM, and use fastboot flash system SYSTEM.img . Same thing for boot and data
Click to expand...
Click to collapse
Thanks for your answers and your help. The first method is not working, if I press all three buttons together, my phone just restarts and the Huawei Boot Sign shows up again.
I'd like to try the second method? But could you tell me, how I can find the system.img, data.img, boot.img files and where I can find the HUAWEI FIRMWARE EXTRACTOR.
ndroid1562 said:
Thanks for your answers and your help. The first method is not working, if I press all three buttons together, my phone just restarts and the Huawei Boot Sign shows up again.
I'd like to try the second method? But could you tell me, how I can find the system.img, data.img, boot.img files and where I can find the HUAWEI FIRMWARE EXTRACTOR.
Click to expand...
Click to collapse
Use this tool to extract them from the UPDATE.APP file of the MM: https://forum.xda-developers.com/showthread.php?t=2433454
First extract the RECOVERY.img only and flash it with fastboot. After that test the three button method again (make sure that you have the file from MM (2.0GB) in the dload folder). If it doesnt work, try the thing i said before.
ndroid1562 said:
Thanks for your answers and your help. The first method is not working, if I press all three buttons together, my phone just restarts and the Huawei Boot Sign shows up again.
I'd like to try the second method? But could you tell me, how I can find the system.img, data.img, boot.img files and where I can find the HUAWEI FIRMWARE EXTRACTOR.
Click to expand...
Click to collapse
OK, sorry for being such a noob. I now installed the Huawei Extractor. Furthermore I downlaoded stock Rom MM B130. Now there are two ZIP Files (like you can see on the picture). Do I have to extract both of them???
EDIT:
There is no data.img in Huawei Extractor. I have taken a screenshot of the files too (you can see it on the second image).
ndroid1562 said:
OK, sorry for being such a noob. I now installed the Huawei Extractor. Furthermore I downlaoded stock Rom MM B130. Now there are two ZIP Files (like you can see on the picture). Do I have to extract both of them???
Click to expand...
Click to collapse
No, only the first (1.7gb).
EDIT: Forget the data.img for now. Try to flash the other files and even if it dont boot, use the version C432B160 to flash using dload method
nitroax said:
No, only the first (1.7gb).
Click to expand...
Click to collapse
There is no data.img in Huawei Extractor. I edited my last reply. Where can I find data.img?
nitroax said:
Use this tool to extract them from the UPDATE.APP file of the MM: https://forum.xda-developers.com/showthread.php?t=2433454
First extract the RECOVERY.img only and flash it with fastboot. After that test the three button method again (make sure that you have the file from MM (2.0GB) in the dload folder). If it doesnt work, try the thing i said before.
Click to expand...
Click to collapse
Before I do the steps you discribed I have two questions.
First: I have to recovery images... RECOVERY.img and RECOVERY2.img. Do I have to flash both of them?
Second: I took a SD Card now and created a folder named dload. In it I put the UPDATE.app file. This has 3 GB, in your post you said it has to be 2 GB. So did I take the right UPDATE file or is it the wrong one?
ndroid1562 said:
Before I do the steps you discribed I have two questions.
First: I have to recovery images... RECOVERY.img and RECOVERY2.img. Do I have to flash both of them?
Second: I took a SD Card now and created a folder named dload. In it I put the UPDATE.app file. This has 3 GB, in your post you said it has to be 2 GB. So did I take the right UPDATE file or is it the wrong one?
Click to expand...
Click to collapse
1 - RECOVERY.img
2 - Youre right the file have 3GB (2gb zipped lol)
nitroax said:
1 - RECOVERY.img
2 - Youre right the file have 3GB (2gb zipped lol)
Click to expand...
Click to collapse
Hahaha, ok. So my veryyy last question. How can I flash the image files now? I thought I could do it with ODIN but there is no possibility to take img files ...?
nitroax said:
1 - RECOVERY.img
2 - Youre right the file have 3GB (2gb zipped lol)
Click to expand...
Click to collapse
I now managed to flash BOOT.img, RECOVERY.img and SYSTEM.img. Afterwards it was possible to extract UPDATE.app by pressing VOL up # VOL down # and the other Button (don't know the english word). But the installation of the UPDATE.app stops on 5%. Whats the reason for this?
So I have a guess right now: Before I tried to downgrade my phone I uninstalled SuperSu but I didn't unroot my phone. So my phone could be still rooted. Could this be the problem why the installation is not working?
nitroax said:
Volup + Power , Format data, Format Cache, Reboot
Click to expand...
Click to collapse
If I try to do a factory reset in eRecovery it stops at 10 % and shows me a " ! ".
I could format chache, but afterwards my Bootloop problem is still not solved ...
ndroid1562 said:
If I try to do a factory reset in eRecovery it stops at 10 % and shows me a " ! ".
I could format chache, but afterwards my Bootloop problem is still not solved ...
Click to expand...
Click to collapse
Since I couldn't manage to rescue my beloved Smartphone, I now sell it on eBay. The Phone is in Germany, but I would send it to other cities in Europe for transportation costs of extra 10 EUROS. If you are interested and like to bid, here is the Link:
http://www.ebay.de/itm/-/201932576564?
ndroid1562 said:
Hahaha, ok. So my veryyy last question. How can I flash the image files now? I thought I could do it with ODIN but there is no possibility to take img files ...?
Click to expand...
Click to collapse
odin is for samsung phones, try unlocking the bootloader, fastboot flash twrp, flash oeminfo in twrp and then use the update.app and 3 button combo, there are guides on this forum explaining exactly how to do it. just make sure you have the correct files.
I need to remove twrp recovery and install stock recovery image
How I can do this gra ul10
Hello! You would be willing to change the ROM?
Uh oh. This reminds me 1 year ago when I had your same problem . The process is simple:
1. Get the UPDATE.APP file wich is no more than all the stuff for the P8 wich includes the recovery. You should find it on emui.huawei.com
2. To see what's in there you need a tool called "Huawei Update Extractor". Just look for it
3. You do the same process for installing TWRP but with the image file "recovery.img"
And you're done
PS. Do a full backup with TWRP just to be sure. To restore it just reflash TWRP and use the restore function
You could flash the original recovery via fastboot if you have a backup of it as raw image.
Or well what @Rome7643 mentioned works also. I submitted a profile for the gra-l09 for the update extractor.
command is like "fastboot flash recovery <path/to/recovery.img>"
There is recovery and recovery2. One of them comes up when usb is connected one when it is not connected when triggering the recovery boot.
nexolight said:
You could flash the original recovery via fastboot if you have a backup of it as raw image.
Or well what @Rome7643 mentioned works also. I submitted a profile for the gra-l09 for the update extractor.
command is like "fastboot flash recovery <path/to/recovery.img>"
There is recovery and recovery2. One of them comes up when usb is connected one when it is not connected when triggering the recovery boot.
Click to expand...
Click to collapse
Thanks alot sir
elsamkary10 said:
I need to remove twrp recovery and install stock recovery image
How I can do this gra ul10
Click to expand...
Click to collapse
Download the UPDATE.APP from a recent stock rom, use the Huawei Update Extractor, then flash the recovery/recovery2 partition with the recovery.img/recovery2.img.
Like "fastboot flash recovery recovery.img" in fastboot mode.
This will only override recovery.
Note that recovery and recovery2 is the same but one triggers only when the usb cable is connected.
Rome7643 said:
Uh oh. This reminds me 1 year ago when I had your same problem . The process is simple:
1. Get the UPDATE.APP file wich is no more than all the stuff for the P8 wich includes the recovery. You should find it on emui.huawei.com
2. To see what's in there you need a tool called "Huawei Update Extractor". Just look for it
3. You do the same process for installing TWRP but with the image file "recovery.img"
And you're done
PS. Do a full backup with TWRP just to be sure. To restore it just reflash TWRP and use the restore function
Click to expand...
Click to collapse
I seem to be having the same problem. In the update.app I dont see the recovery.img file. Instead there are 3 files
recovery_ramdis
recovery_vendor
recovery_vbmeta
please advise.
sirdj said:
I seem to be having the same problem. In the update.app I dont see the recovery.img file. Instead there are 3 files
recovery_ramdis
recovery_vendor
recovery_vbmeta
please advise.
Click to expand...
Click to collapse
Please, next time you should be more careful when downloading the file UPDATE.APP or update.zip ! I guess you downloaded one from Huawei P9, but for sure it's not for Huawei P8 !
After you unpack update.app there should be RECOVERY.img and RECOVERY2.img along with others partitions images.
Good luck !
surdu_petru said:
Please, next time you should be more careful when downloading the file UPDATE.APP or update.zip ! I guess you downloaded one from Huawei P9, but for sure it's not for Huawei P8 !
After you unpack update.app there should be RECOVERY.img and RECOVERY2.img along with others partitions images.
Good luck !
Click to expand...
Click to collapse
I am sorry if I posted in the thread for the wrong phone. I have a mate 9.
If you want to go back to the original firmware. Here is a little guide.
First, download your firmware at https://easy-firmware.com/home/browse/category/id/337/.
Then you extract the UPDATE.APP from this archive.
Next, load the splitupdater from here: https://github.com/marcominetti/split_updata.pl.
Moves the folder split under Downloads and copies the UPDATE.APP into it.
Then open the terminal and enter the following.
1. cd downloads
2. ls
3. cd split
4. # copy splitupdate, crc and UPDATE.APP files
5. chmod + x splitupdate
6. chmod + x crc
7. ./splitupdate UPDATE.APP
Now you boot your Huawei in the fast boot mode first connect the USB cable and at the same time hold down the volume down button until the Fastboot mode appears.
Then you just need to install the files BOOT.img, RECOVERY.img and SYSTEM.img via the terminal with the following command. The 3 files can be found in the split output folder.
1. fastboot devices
2. fastboot flash boot BOOT.IMG
3. fastboot flash recovery RECOVERY.img
4. fastboot flash system SYSTEM.img
5. fastboot reboot
Now you have a fresh clean install again.
I hope that the guide will help you with missteps of Custom Roms that are listed here.
Greetings Jack241287