hei there i'm from romania and i don't know english to good, i hope ur understand.
ok so.....i'm rooted my phone and i've put cyanomogen mod and i didin't do a backup at stock rom...i've simple instal cyanomogen and i've deleted the past. ok, and today i was trying to instal stock rom, i don't know what i've done because now, my phone is stuck at recovery mode (i've formated everything in my phone, i just have twrp recovery and nothing) even if i mount my sd card on pc with twrp mount mode, i download a costum rom for him....and gapps, i put into phone then i install them...but finally still stuck at recovery and even if i reboot...still boot just recovery and i don't push the vol + or -.
i was trying the stock rom with update.app, i've downloaded huawei extractor, but when i put the update.app there....invalid or uknown file.
please i just want my phone back
Related
I really hope someone can help me out. I think I bricked my phone.
I tried to recover my phone back to stock with stock recovery so I can send it in for repair. When I installed 2.3.4 OTA update through zip, I accidentally clicked yes for updating 2.3.6. I didn't know, went to washroom and my phone won't boot. I thought no worries I'll install the zip again. Going into recovery, there's an android picture with an exclamation mark. I can't boot into phone and cannot load recovery. Someone please help >_<
download CWM and try to flash it through fastboot, and use that to flash a new img. im assuming you've done this before, having a custom recovery before now. if not, make sure you have fastboot setup, and if you don't go look through a rooting guide how to set it up then once you have it set up, move the new recovery you downloaded to the same folder as fastboot, then type
fastboot flash recovery name_of_recovery
of course replace the name_of_recovery with the exact filename of the recovery you downloaded. you can get the ClockworkMod recovery I think at www.clockworkmod.com
then boot into the new recovery and go to Mounts and Storage and Mount USB, and take the update.zip that you have and load it onto your SD Card, then go into the recovery and do as you would to flash the zip
Problem is, I don't think usb debugged was enabled. I tried to lock bootloader so I can just take it back to my carrier and say phone is screwed up, but when I tried, it said device not found.
The only way I think is using odin.
hi guys,
i flashed recovery using the manual method from this thread http://forum.xda-developers.com/showthread.php?t=2468858.
I wasn't able to use the last command
Code:
rm /sdcard/g2_security
I thought it didn't work , i also updated the my phone software.
When my phone restarted it went to cwm and now its stuck there.
Now when I try to boot I can either get in CWM or some Korean Recovery Menu with three option (i tried all nothing happend) or just stuck in boot loop!
I can't get in download mode by pressing vol up and plugging usb cable (tried all possible methods)
I will be glad if someone can help me out.
Thanks in advance
That's an unexpected situation to say the least.
So in short: installation of recovery worked, but you lost access to your ROM.
Correct?
Now, if you had a flashable ROM on your sd card you would be sorted, no?
I would say, get any compatible ROM, put them on a micro sd card and plug them into your phone. Flash through cwm...
Am I misunderstanding?
Otherwise there is always the fully back to stock option:
http://forum.xda-developers.com/showthread.php?t=2475045
Zentac said:
That's an unexpected situation to say the least.
So in short: installation of recovery worked, but you lost access to your ROM.
Correct?
Now, if you had a flashable ROM on your sd card you would be sorted, no?
I would say, get any compatible ROM, put them on a micro sd card and plug them into your phone. Flash through cwm...
Am I misunderstanding?
Otherwise there is always the fully back to stock option:
http://forum.xda-developers.com/showthread.php?t=2475045
Click to expand...
Click to collapse
I was able to fix my phone using this thread. I was able to get in recovery but not in download mode. After executing these commands I flashed stock firmware through LG flashing tools.
aatish said:
hi guys,
i flashed recovery using the manual method from this thread http://forum.xda-developers.com/showthread.php?t=2468858.
I wasn't able to use the last command
Code:
rm /sdcard/g2_security
I thought it didn't work , i also updated the my phone software.
When my phone restarted it went to cwm and now its stuck there.
Now when I try to boot I can either get in CWM or some Korean Recovery Menu with three option (i tried all nothing happend) or just stuck in boot loop!
I can't get in download mode by pressing vol up and plugging usb cable (tried all possible methods)
I will be glad if someone can help me out.
Thanks in advance
Click to expand...
Click to collapse
The same exact thing happed to me. did u fix it, if yes can you please tell me how??
I have the same issue. Nothing mentioned in other threads is useful just because I CAN'T ENTER DOWNLOAD MODE. Totally stuck Help! Devs! Anyone!
Try installing some custom rom from recovery...after installing custom rom you can enter into download mode and do whatever u want...return to stock using kdz files or anything else..
[Q] TCL Idol X S950 Bootloop - Recovery can't mount internal storage "sdcard"
I have installed S4 themed ROM for s950 but after i did the wipe and at reboot appeared a notification "can't read sd card....format?" so i returned to recovery but says "e:can't mount cache\.." "e:can't open.." etc etc.
can someone help me?
PS. Sorry for my bad english
I have the exact same problem, did you found a solution?
bootloop
Hi guys, i have the same problem.After using TCL upgrade tool my device kept rebooting after the manufacturer logo was showing up.At first i could get into CWM recovery i tied everything from fixing permissions to wiping cache , dalvik etc. Then i tried to reflash CWM using sp flash tool
and now i cant even get into recovery. After that i tired with adb-fastboot but my device doesn't get recognized by adb.Its weird cause when i have the device plugged into powersource the device starts rebooting , and when i have it unplugged does nothing even i i press power button.
Anybody has an idea of what the problem might be?
Thanks in advance
errikozz said:
Hi guys, i have the same problem.After using TCL upgrade tool my device kept rebooting after the manufacturer logo was showing up.At first i could get into CWM recovery i tied everything from fixing permissions to wiping cache , dalvik etc. Then i tried to reflash CWM using sp flash tool
and now i cant even get into recovery. After that i tired with adb-fastboot but my device doesn't get recognized by adb.Its weird cause when i have the device plugged into powersource the device starts rebooting , and when i have it unplugged does nothing even i i press power button.
Anybody has an idea of what the problem might be?
Thanks in advance
Click to expand...
Click to collapse
If you have backup, try to flash it via sp flash tool. From sp flash tool format phone, and then flash everything checked, with original preloader. I had similar problem and that solved it.
If you don't have original backup, do not format phone from sp flash tool. Instead, try flashing official rom 4.4.2 (search on forum) and do as described. Just do not flash recovery from that rom. Download philz touch recovery (on same thread you have link), replace and flash. Conect phone, click Download on sp flash tool and press and hold power button until phone restarts.
Put_Nick said:
If you have backup, try to flash it via sp flash tool. From sp flash tool format phone, and then flash everything checked, with original preloader. I had similar problem and that solved it.
If you don't have original backup, do not format phone from sp flash tool. Instead, try flashing official rom 4.4.2 (search on forum) and do as described. Just do not flash recovery from that rom. Download philz touch recovery (on same thread you have link), replace and flash. Conect phone, click Download on sp flash tool and press and hold power button until phone restarts.
Click to expand...
Click to collapse
Thanks man , i flashed 4.4.2 and philz touch and the only diference now is that i can turn on the phone when is not connected to the power adapter.
im trying to enter recovery but still nothing ...
I've unlocked the bootloader and flashed the Revolution Recovery B9, but I can't mount 'data' , so I modified the partition into F2FS and then formatted it. After that I couldn't enter to system, so I used three buttons to recovery the stock firmware. Now I can't reflash the TWRP and I can't add any goggle account.
What should I do?
Thanks before
What version p9 lite vns- ??
What do you want to install as firmware?
Info. If you wanted to be helped, helped too.
Hi,
have similar issue.
Bought P9Lite, originally on Vodafone UK/IE. VNS-L31C02B120.
Flashed B432 ROM which was OK, although changed to C900. Then I flashed something which was posted as UPDATE.APP. I thought it's an update, but then saw the size, was about 32MB. Since then it boots into Huawei eRecovery, which is uselless as it connect via Wi-Fi but does nothing. I can boot into fastboot/Recovery mode but thats it.
Tried flash Vodafone ROM but it stuck at 5%, no matter what I try to flash. The last when it booted still showed the Vodafone start up logo.
Any help appreciated...
Bootloader locked, no root.
1) Disconnect and power off.
2) Put a stock rom (UPDATE.APP) on SD card in folder dload and put it in the phone. If you have not, create folder "dload"
3) Hold down all 3 hardware buttons for cca. 10 second (Volume+ AND Volume- AND Power) until the phone enters EMUI system update mode and stars update from the SD card.
4) Phone will reboot and you have OS
I have rooted the phone and was using a custom ROM from meticulus.co.vu as well as his custom twrp.
I have the VNS-L31 variant.
I wanted to roll back to stock because the fingerprint sensor didn't work due to me not clearing the saved ones when I changed ROMs.
What I did was factory reset the device, flash stock recovery, cust and boot (from update.app) onto the phone and then put update.app into the SD card in a dload folder. I then proceeded to hold the Vol+, Vol- and Power buttons to update manually. This didn't work because it said 'Software install failed'. Now the phone only boots into eRecovery and fastboot. I cannot get into TWRP despite flashing it multiple times through fastboot.
I am completely out of options, please help me xda.
EDIT: I managed to get it working - for those with a similar issue - download firmware finder and go through ALL of the models, one will work!
However, I cannot sign into google play...
Maybe this helps? http://www.techoxygen.com/bypass-google-account-unlock-frp-huawei-p9-lite-nexus-6p/