Database Users

ASUS ZENFONE A501CG (WW SKU) showing red rectangle on boot up

I had a custom rom installed on my zenfone 5 in working condition.Then i got a new cell and put the zenfone away safely.After few months..around 5-6 months,i checked my zenfone again and WTF!!! It wont boot!!!
It just showed a big red rectangle on the screen,the device do charges,also it goes to fastboot and recovery mode,but i cant flash any rom using twrp. It gives the error message that "Failed to mount '/system' (invalid argument)".
I am helpless,I tried changing the system using twrp to FAT,EXT4 and so on,but nothing helped,still the same ERRORS!!!
Please help me with this problem ASAP guyz,I mentioned every detail i can,also attached photos of the error and red rectangle,do check them.THank YOU

iamtj said:
I had a custom rom installed on my zenfone 5 in working condition.Then i got a new cell and put the zenfone away safely.After few months..around 5-6 months,i checked my zenfone again and WTF!!! It wont boot!!!
It just showed a big red rectangle on the screen,the device do charges,also it goes to fastboot and recovery mode,but i cant flash any rom using twrp. It gives the error message that "Failed to mount '/system' (invalid argument)".
I am helpless,I tried changing the system using twrp to FAT,EXT4 and so on,but nothing helped,still the same ERRORS!!!
Please help me with this problem ASAP guyz,I mentioned every detail i can,also attached photos of the error and red rectangle,do check them.THank YOU
Click to expand...
Click to collapse
Sounds like a partition issue, How did you unlocked the bootloader and installed twrp??

$tark3 said:
Sounds like a partition issue, How did you unlocked the bootloader and installed twrp??
Click to expand...
Click to collapse
The bootloader was unlocked,i didnt relocked it,TWRP was installed the day i rooted my phone,that is a year ago,in short.i installed twrp when my cell phone was running fine

iamtj said:
The bootloader was unlocked,i didnt relocked it,TWRP was installed the day i rooted my phone,that is a year ago,in short.i installed twrp when my cell phone was running fine
Click to expand...
Click to collapse
ok, what do you meant by bootloader was unlocked? you got it unlocked or you unlocked it? if yes how?

$tark3 said:
ok, what do you meant by bootloader was unlocked? you got it unlocked or you unlocked it? if yes how?
Click to expand...
Click to collapse
Well I dont remember,There was a command window type software which had options to unlock and relock bootloader.
Last time i unlocked bootloader was months ago

iamtj said:
Well I dont remember,There was a command window type software which had options to unlock and relock bootloader.
Last time i unlocked bootloader was months ago
Click to expand...
Click to collapse
You tried Debrick method which uses cloverview?

$tark3 said:
You tried Debrick method which uses cloverview?
Click to expand...
Click to collapse
yeah,but couldn't get my phone in clover view

iamtj said:
yeah,but couldn't get my phone in clover view
Click to expand...
Click to collapse
I've posted a reply. Try it

$tark3 said:
I've posted a reply. Try it
Click to expand...
Click to collapse
but i cant get into clover view mode,thats the problem

iamtj said:
but i cant get into clover view mode,thats the problem
Click to expand...
Click to collapse
can you post a ss of whats the command prompt when you connect the phone to the pc while holding vol -

$tark3 said:
can you post a ss of whats the command prompt when you connect the phone to the pc while holding vol -
Click to expand...
Click to collapse
OK,I will do that

i tried everything,even gave it to local repair shops,but the phone wont mount system,guess i will just throw it away

Clover view mode requires some drivers did you installed it (I don't remember, It's something like RNDIS )

Shubham_Ghodake said:
Clover view mode requires some drivers did you installed it (I don't remember, It's something like RNDIS )
Click to expand...
Click to collapse
The process is very complicated as well as time consuming,and it requires a lot of patience and will power to go through it again,I will see if I can do that again

p9 lite bricked how to repartition?

p9 lite VNS-L31
hi not long had the phone updated via firmware finder did 2 updates ok, then did another but that was the nrd90m test keys
tried to downgrade and fix mount/partitions but i messed this up
basically i can get into fastboot , frp and bootloader(PHONE?) unlocked.
cant flash anything as says failed and cannot 3button uodate only goes to 5% reboots.
I think i need to repartion/fix mounts can this be done via fastboot? or what program can i use, then i guess i can flash the stock recovery then 3 button update?
THANKS in advance

jas95aero said:
p9 lite VNS-L31
hi not long had the phone updated via firmware finder did 2 updates ok, then did another but that was the nrd90m test keys
tried to downgrade and fix mount/partitions but i messed this up
basically i can get into fastboot , frp and bootloader(PHONE?) unlocked.
cant flash anything as says failed and cannot 3button uodate only goes to 5% reboots.
I think i need to repartion/fix mounts can this be done via fastboot? or what program can i use, then i guess i can flash the stock recovery then 3 button update?
THANKS in advance
Click to expand...
Click to collapse
flash those 2 in dload method
1st file : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&siteCode=nl
2nd file : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=nl

Kcetin20 said:
flash those 2 in dload method
1st file : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&siteCode=nl
2nd file : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=nl
Click to expand...
Click to collapse
ok thanks ill have a go today let you know, thanks

jas95aero said:
ok thanks ill have a go today let you know, thanks
Click to expand...
Click to collapse
cant get into 3 button mode just says booting, can get into fastboot

jas95aero said:
cant get into 3 button mode just says booting, can get into fastboot
Click to expand...
Click to collapse
device needs to be shut off, either drain the battery or unplug the battery it got a plastic cover only 2min work ~,

Kcetin20 said:
device needs to be shut off, either drain the battery or unplug the battery it got a plastic cover only 2min work ~,
Click to expand...
Click to collapse
tried that just stuck at your device is booting

jas95aero said:
tried that just stuck at your device is booting
Click to expand...
Click to collapse
ok managed to get into it flashed another stock rom, but get system update failed now?

jas95aero said:
ok managed to get into it flashed another stock rom, but get system update failed now?
Click to expand...
Click to collapse
so now i can get into erecovery or dload moad but both fail, still 5% then fails

jas95aero said:
so now i can get into erecovery or dload moad but both fail, still 5% then fails
Click to expand...
Click to collapse
riht so i tried dc-phoenx but that shows my phone as...
IMEI: (i blanked this out)
Build number: :VNS-L21C432B130
Product model: HUAWEI VNS-L21
but its actually vns-l31 what can i do to change this ?

jas95aero said:
riht so i tried dc-phoenx but that shows my phone as...
IMEI: (i blanked this out)
Build number: :VNS-L21C432B130
Product model: HUAWEI VNS-L21
but its actually vns-l31 what can i do to change this ?
Click to expand...
Click to collapse
ok so to update and answer my own question ...... i used dc phoenix to flash antoher uppdate but l31c432b130 this failed but after restart the phoned showed as being vns-l31 so from there i installed firmware finder (after signing into playstore) then updated one update at time, so 130-150-160.
question is should i go onto emui 5/android7 or stick on 4.1/android 6?

[BRICKED] Erecovery has bricked my device compeletly

Hello,
I recently wanted to go back to stock so i used erecovery to do it, it completed with 100% but now my phone is not responsive at all, nothing shows on screen, led doesn't work, when i plug it in the pc it detects it but its in fastboot mode and bootloader is locked.
If you have any way to undo this, please tell me

davidhozic said:
Hello,
I recently wanted to go back to stock so i used erecovery to do it, it completed with 100% but now my phone is not responsive at all, nothing shows on screen, led doesn't work, when i plug it in the pc it detects it but its in fastboot mode and bootloader is locked.
If you have any way to undo this, please tell me
Click to expand...
Click to collapse
Unlock bootloader and see if then you can boot the system

davidhozic said:
Hello,
I recently wanted to go back to stock so i used erecovery to do it, it completed with 100% but now my phone is not responsive at all, nothing shows on screen, led doesn't work, when i plug it in the pc it detects it but its in fastboot mode and bootloader is locked.
If you have any way to undo this, please tell me
Click to expand...
Click to collapse
Does it show like this?

K3RN3L_P4N1C said:
Does it show like this?
Click to expand...
Click to collapse
No, your display is turned on and booted but you have a black screen, you can see the buttons and the led works in your case...
my phone doesn't turn on the display and fastboot says my device is pra-sth..

Eurofighter_ty said:
Unlock bootloader and see if then you can boot the system
Click to expand...
Click to collapse
Can you provide me the product id for the p10 lite? It should be the same across all p10 lite's

davidhozic said:
No, your display is turned on and booted but you have a black screen, you can see the buttons and the led works in your case...
my phone doesn't turn on the display and fastboot says my device is pra-sth..
Click to expand...
Click to collapse
RIP Phone

davidhozic said:
Can you provide me the product id for the p10 lite? It should be the same across all p10 lite's
Click to expand...
Click to collapse
The partition ?

Eurofighter_ty said:
The partition ?
Click to expand...
Click to collapse
"partition"? What?? product ID, you need it on the huawei's site for the bootloader code

mate 8 verification failed

your device has failed verification and may not work properly .
seriously i have done nothing it reboot and i got this msg and didn't do anything since .
can you guys help me please ? and also can i keep my files ? like Gallery

MotasemBT said:
your device has failed verification and may not work properly .
seriously i have done nothing it reboot and i got this msg and didn't do anything since .
can you guys help me please ? and also can i keep my files ? like Gallery
Click to expand...
Click to collapse
Typical message when the bootloader is unlocked. There is no problem to boot up.
Sent from my HUAWEI NXT-L29 using Tapatalk

Leo_83 said:
Typical message when the bootloader is unlocked. There is no problem to boot up.
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
but it wont boot up i can only get in EMUI and tried download over wifi option and not working
any idea how to fix ?

MotasemBT said:
but it wont boot up i can only get in EMUI and tried download over wifi option and not working
any idea how to fix ?
Click to expand...
Click to collapse
Can boot into fastboot?
If yes you might be able to flash files over fastboot. But the best would have been via the E-recovery but you say that fails.
Is there an option to do a reset, I forgot what it is called?
Sent from my HUAWEI NXT-L29 using Tapatalk

https://ibb.co/fALtP8
https://ibb.co/hgbYP8
https://ibb.co/bAzbcT
https://ibb.co/eq5XHT
https://ibb.co/h40oro

in here at fastboot it says open Hisuite and connect ur phone , i tried that but it says no phone connected
https://ibb.co/eh6uWo

MotasemBT said:
in here at fastboot it says open Hisuite and connect ur phone , i tried that but it says no phone connected
https://ibb.co/eh6uWo
Click to expand...
Click to collapse
Which version/model? Have you tried Factory reset?

nxt-l29

MotasemBT said:
nxt-l29
Click to expand...
Click to collapse
i mean you have not rebranded, right?
Photos shows your phone is locked while you are getting message for unlocked.
If you have unlock code, just try unlock it. It will auto factory reset after that and boot.

as far as i know its original and i get updates from Huawei .
and what code and where i enter it ?
the phone never gets over this screens . look
btw the first option it does not continue , it says your device is booting now , then nothing happen ( stuck ) or it turns off .

MotasemBT said:
as far as i know its original and i get updates from Huawei .
and what code and where i enter it ?
the phone never gets over this screens . look
btw the first option it does not continue , it says your device is booting now , then nothing happen ( stuck ) or it turns off .
Click to expand...
Click to collapse
ok...just do one thing, which ever rom you were on before, put It in sd card and dload with 3 button method. All will be ok.

Thanks for the reply , its old post , already through it in trash long time .
P30 pro now .

need help unbricking ny nokia 6

I have a TA-1033 version and a deep flash engerneering cable but im stuck of how to unbrick, my device is detected as QDLoader 9008, also if i try to flash using NOST i get "polling USB device" then a "DEVICE_NOT_CONFIGURE" its an 0x4000 error
if anyone can help me out that would be great!
Sent from my AGS_W09

I have same problem. I don't know what i do, but seems to when i charge my phone over 80 %.
Then i get it download mode and i change edl cable to regular usb cable and then fastboot reconise my phone and i can flash it succesfull.

DoggyStar said:
I have same problem. I don't know what i do, but seems to when i charge my phone over 80 %.
Then i get it download mode and i change edl cable to regular usb cable and then fastboot reconise my phone and i can flash it succesfull.
Click to expand...
Click to collapse
Its completely dead, only detected as QHSUSB BULK and like i said i got one of those deep flash cables from shenzen

When you but it on, can you see android text or just "you phone is unlocked text"?
My phone only shows that unlock text, but after I use edl cable i can get android text showing up.

DoggyStar said:
When you but it on, can you see android text or just "you phone is unlocked text"?
My phone only shows that unlock text, but after I use edl cable i can get android text showing up.
Click to expand...
Click to collapse
No mine just doesnt vibrate or anything

And you have full battery?

DoggyStar said:
And you have full battery?
Click to expand...
Click to collapse
I dont know because its dead as in it wont show any signs of life

Yes yes, but put it ac charger for 2-3 hours and see if you then see something or can you then get it fastboot mode.
My phone has low battery but when I charge it, fastboot start working magically.

DoggyStar said:
Yes yes, but put it ac charger for 2-3 hours and see if you then see something or can you then get it fastboot mode.
My phone has low battery but when I charge it, fastboot start working magically.
Click to expand...
Click to collapse
I modified my aboot.img because i thought i could downgrade but that killed my device

mattwhite7102 said:
I modified my aboot.img because i thought i could downgrade but that killed my device
Click to expand...
Click to collapse
Does qpst tool worked for you?

Emmykay223 said:
Does qpst tool worked for you?
Click to expand...
Click to collapse
Nope, i dont have the files for QPST, but i do have the qfil files and one of those deep flash cables, if you can get my phone fixed i will respect you forever!

mattwhite7102 said:
Nope, i dont have the files for QPST, but i do have the qfil files and one of those deep flash cables, if you can get my phone fixed i will respect you forever!
Click to expand...
Click to collapse
No no i don't want that , if i could help you surely i will .. download qpst tool and Qualcomm drivers on your pc or laptop , if you did all the things and nothing happened yet, so why you don't try this too? We never know which things could give us better results. Hope for the best ??
https://www.qpstflash.com
Download qpst from here

Emmykay223 said:
No no i don't want that , if i could help you surely i will .. download qpst tool and Qualcomm drivers on your pc or laptop , if you did all the things and nothing happened yet, so why you don't try this too? We never know which things could give us better results. Hope for the best ??
https://www.qpstflash.com
Download qpst from here
Click to expand...
Click to collapse
Well i downloaded the 2.7.453 of qpst and flashing with qfil gives me SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED though whats strange is different versions of qfil gives me different errors...

mattwhite7102 said:
Well i downloaded the 2.7.453 of qpst and flashing with qfil gives me SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED though whats strange is different versions of qfil gives me different errors...
Click to expand...
Click to collapse
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear

Emmykay223 said:
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Click to expand...
Click to collapse
It does get detected by qpst, might be a driver issue

Emmykay223 said:
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Click to expand...
Click to collapse
Nope tried it but coming up with "unable to download flash programmer with sahara protocol"

mattwhite7102 said:
Nope tried it but coming up with "unable to download flash programmer with sahara protocol"
Click to expand...
Click to collapse
Download another android flash zip files from here, 8.0 or 9.0 directly hope it would work

Emmykay223 said:
Download another android flash zip files from here, 8.0 or 9.0 directly hope it would work
Click to expand...
Click to collapse
Can you link me for the TA-1033? its gotta be qfil because my phone doesnt show any signs of life!

mattwhite7102 said:
Can you link me for the TA-1033? its gotta be qfil because my phone doesnt show any signs of life!
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-6/help/nokia-6-ota-update-ddls-t3721424/amp/

Emmykay223 said:
https://www.google.com/amp/s/forum....-6/help/nokia-6-ota-update-ddls-t3721424/amp/
Click to expand...
Click to collapse
I cant install these because my phone gets detcted as QHSUSB BULK