solution to blackscreen on backscreen - YotaPhone

from time to time I got my backscreen all black, mirroring still works but unable to bring back the widgets, usually I restarted the device to recover but now I have found a much more simple solution, just launch the tutorial, and the widgets are back !

hi, i have the same problem, currently running Lollipop.
I've find out that when this happens you can "refresh" the backscreen by launching the YotaHub app and do a long press on the home button, then swipe to the refresh icon on the left.
Still don't know what causes this issue

Related

The phantom widget

Hello everyone, this is what happens:
If I turn off the phone with the power manager widget on the screen when you turn the phone the widget is not finished loading I can only see a gray rectangle and the only way to get it working again is to do a hard reset.
Thank you all, you are the best, and please forgive my English.
A little more information
I forgot to tell you that I also tested with the widget controls and extended SwitchPro and same thing happens with Power Manager
I know what you mean. I have to press one of the power control buttons 2 or 3 times then swipe to another page and back again. Not ideal but worth it as I like the widget.
salvador.blaya said:
Hello everyone, this is what happens:
If I turn off the phone with the power manager widget on the screen when you turn the phone the widget is not finished loading I can only see a gray rectangle and the only way to get it working again is to do a hard reset.
Thank you all, you are the best, and please forgive my English.
Click to expand...
Click to collapse
dude hard reset what are talking about just give ur phone sometime and swipe to other page.. now when u come back to home page things will be normal..
nothing hapens
When I swipe the screen to an other page an come back to the main screen nothing happens.
You could try deleting the widget from the page then re-adding it, however I agree with warriorvibhu; giving the phone some more time should sort it. I've had happen a few times but it's always appeared eventually.
Also about other widgets
Do you also happen with other widgets like or SwitchPro Extended Controls?

[Q] Gingerdx v17 issues home button /camera button not working

hi Gang.
I have beenusing gingerdx for about 1 month, all ok. today i updated to v17. had to reinstall email.apk, facebook and soundcloud as they were FC'ing all the time. now they are fixed.
I have the following 2 issues
1 camera button not open camera
2 home button not working as expected. I have set it to open homescreen on short press and open app list on long press. neither work.
when phone in standby, pressing the home jey turns the screen on. nothing else.
any help?
thanks
I can answer only for question 1, because I dont use preinstaled launcher.
For camera button: I must long press camera button (about 1,5 sec. - phone must short vibrate) to start camera app.
I have also recently given GDX a second attempt from FB. I am also facing the same problem with the home button not working, exactly as you explain it. Wierd. I've got a E15a if that helps...
I also can't get any of the lock screen options to work, pattern, pin or password work. Everything's enabled but when I bring the phone off stand-by there is no unlocking option, just goes straight to home screen.
Edit: After someone testing, I think I figured out why this was happening. The issue happens when I flash GDX from FB or if I do a full wipe and use titanium backup to restore system data. So I believe there was some sort of incompatibility between GDX and FB settings. At the moment it seems more stable (or so I hope). If you want to keep your contacts, call log, messages etc, on TB just tick contacts storage, dialer storage and media storage and leave the rest unchecked.

[Q] ReLaunch: Missing applications bar, Settings gear stopped working

Hi all,
Having followed the instructions I now have a non-bricked NST with NookManager and ReLaunch. I now have two fairly irritating problems, probably due to me poking around in the settings menu a bit too hard.
PROBLEM THE FIRST
In ReLaunch, my Settings gear does nothing. I press it and the screen flicks and then goes back to ReLaunch (exactly where I was in the first place). This makes my inner tinkerer sad and also makes it more than a little difficult to try and fix the issue with:
PROBLEM THE SECOND
If I go to the Nook e-book reading mode and then take myself back to ReLaunch (I'd bound it to long-press of the hardware n key before my Settings button stopped working), the entire bottom bar has vanished. Which means no Applications button, which means I can't really get to launching any of my apps, which means I have... an ebook reader. The only way I can restore it is by rebooting the NST and selecting ReLaunch from the launcher menu at startup.
Any clues?
Floomi said:
Hi all,
Having followed the instructions I now have a non-bricked NST with NookManager and ReLaunch. I now have two fairly irritating problems, probably due to me poking around in the settings menu a bit too hard.
PROBLEM THE FIRST
In ReLaunch, my Settings gear does nothing. I press it and the screen flicks and then goes back to ReLaunch (exactly where I was in the first place). This makes my inner tinkerer sad and also makes it more than a little difficult to try and fix the issue with:
PROBLEM THE SECOND
If I go to the Nook e-book reading mode and then take myself back to ReLaunch (I'd bound it to long-press of the hardware n key before my Settings button stopped working), the entire bottom bar has vanished. Which means no Applications button, which means I can't really get to launching any of my apps, which means I have... an ebook reader. The only way I can restore it is by rebooting the NST and selecting ReLaunch from the launcher menu at startup.
Any clues?
Click to expand...
Click to collapse
You say you cannot access apps, so figure you have Android Market installed? You could try this - Install launcher 7, once installed, you can 'open' it from the notification. You should then be able to access your apps. Make your first port of call the Nook Touch Mod Manager.
Or you could reset the settings in ReLaunch
I have the same problem.
Floomi said:
In ReLaunch, my Settings gear does nothing. I press it and the screen flicks and then goes back to ReLaunch (exactly where I was in the first place).
Any clues?
Click to expand...
Click to collapse
I even unrooted my Nook and rooted it back to fix his. Unfortunately after one use of settings, this problem occured again. Would anyone help?
Undoubtedly it hit an error and died.
What error? Look at the logcat and see.
You need ADB to see logcat.
http://forum.xda-developers.com/wiki/BN_Nook_Simple_Touch/Installing_ADB
Floomi said:
PROBLEM THE FIRST
In ReLaunch, my Settings gear does nothing. I press it and the screen flicks and then goes back to ReLaunch (exactly where I was in the first place). This makes my inner tinkerer sad and also makes it more than a little difficult to try and fix the issue with:
Any clues?
Click to expand...
Click to collapse
I have the same exact problem. Could anyone please help fixing this?

[Q] Bug report on omnirom 4.4 for N7000

1. the battery display isn't correct when I turn off the phone and restart again. It turns 42% to 35% immediately. After I undergraded to 4.0.4, it turns back to 43% again.
2. My Wechat app can not open QQsnyc, it turns black and nothing happens.(not important)
3. I touch the menu button, and touch the Setting icon but it won't open.While I open the apps icons on main screen, if I touch menu button, three icons will appear on background, namely Wallpaper, Widgets and Settings, really do not know why.
4.Yep lots of apps can not run on ART. But this is not your problems i guess.
5.The internet browser will shut sometime for no reason.
Thanks so much for this wonderful rom.
linlishuo said:
1. the battery display isn't correct when I turn off the phone and restart again. It turns 42% to 35% immediately. After I undergraded to 4.0.4, it turns back to 43% again.
2. My Wechat app can not open QQsnyc, it turns black and nothing happens.(not important)
3. I touch the menu button, and touch the Setting icon but it won't open.While I open the apps icons on main screen, if I touch menu button, three icons will appear on background, namely Wallpaper, Widgets and Settings, really do not know why.
4.Yep lots of apps can not run on ART. But this is not your problems i guess.
5.The internet browser will shut sometime for no reason.
Thanks so much for this wonderful rom.
Click to expand...
Click to collapse
1) - Nothing to do with Omni. The entire Galaxy S2 family (anything with a MAX17040 fuel gauge) has done this since day one - Touchwizz, CM, Omni, doesn't matter.
2) No clue here. A recent merge of Qualcomm stuff to frameworks/av appears to have broken some camera/video stuff on Exynos devices. Unfortunately the merge happened just before the Thanksgiving holiday so a number of us were spending a few days with family and haven't had time to get things cleaned up.
3) Not sure, guess that might be a launcher bug. I admit, I use Apex...
4) That's common to any device with kitkat
5) Haven't had this happen to me yet... Would need a logcat to take a look.
same problem
linlishuo said:
3. I touch the menu button, and touch the Setting icon but it won't open.While I open the apps icons on main screen, if I touch menu button, three icons will appear on background, namely Wallpaper, Widgets and Settings, really do not know why.
I have the same problem above, when touch the Setting icon, it won't open. and no replys by my n7000.
Click to expand...
Click to collapse
how to submit a bug report
Am new to OMNI and would like to submit a bug report.
Where can I find instructions to do that?

[Z300M] Video flashes

This is a bit hard to explain. Bear with me.
On my Z300M, occasionally the screen starts flashing shortly a screen image from another app. It looks as if the app made a screenshot and that this screenshot is repeatedly shown, even though the app is no longer active.
For example, I've been looking to a television program using the (dutch) NPO Start app. I terminate the app and go to the home screen. Suddenly
a screenshot from the NPO app is shown, disappears after a second, reappears after a short while (10-20 seconds) etc. When the screenshot is shown the display is still sensitive to the buttons and icons of the home screen so it is clearly a video problem.
Only a reboot solves it.
Anyone any ideas what could be going on?

Categories

Resources