Related
Hi all, i'm new to Android Phones, so i started a few days with this phone. But now i think i've done a big mistake, i tried to erase everything from the phone, in a hope to "restore" to the factory state. Instead, i think i've deleted everything from the phone, and now, it only says "Your device is booting now..." and it doesn't boot. It's unlocked and rooted, i've deleted it from the TWRP menu.
So, is there anything that i can do, to restore it back? The model i think it's the VNS-L31, i'm downloading a firmware from the L21, can it be replaced or something like that? Thankx in advance.
*Edit* I found stock rom for my phone here in the fórum, but it says i need to have stock recovery but i have the TWRP recovery. Is there any way that i can do it, with that recovery?
*Edit 2* In Erecovery, when i try to download it says "Getting package info failed"
First of all... Why don't you have a backup in TWRP? ALWAYS back up your stuff before doing ANYTHING in TWRP.
Second: there is an option for factory reset within the EMUI system itself. Absolutely no need to mess around in TWRP for something like that. Of course you can "factory reset" in TWRP but this can also wipe your system which then requires you to flash something.
To your problem:
Since I luckily was not forced to flash a stock firmware yet, some more information would be nice.
In which format does the firmware come (link to where you downloaded it)? TWRP can handle .zip files. So if it comes as a .zip file, you can try flashing it through TWRP (really depends on what you downloaded!)
If you only need stock recovery, try accessing TWRP with your phone plugged into a PC.
This way it normally fires up the stock eRecovery.
Hi, yeah, i should have done a backup, thank you for the advice. The firmware i used is this one www .stechguide.com/huawei-p9-lite-marshmallow-firmware-b100/ - i found it here, and a user used it to, not sure why, but he says that it worked.
I'm not sure if this is the right way to do it, because i'm new to this. The TWRP boot, but i can't get my phone to get recognized by the huawei software, not sure if it need to. Even with the drivers installed, it only connects if the phone is on the menu.
iDeadSmack said:
Hi, yeah, i should have done a backup, thank you for the advice. The firmware i used is this one www .stechguide.com/huawei-p9-lite-marshmallow-firmware-b100/ - i found it here, and a user used it to, not sure why, but he says that it worked.
I'm not sure if this is the right way to do it, because i'm new to this. The TWRP boot, but i can't get my phone to get recognized by the huawei software, not sure if it need to. Even with the drivers installed, it only connects if the phone is on the menu.
Click to expand...
Click to collapse
Hmm maybe best way is to send the user that made it work a PM and maybe he can provide you a guide on how to do it.
And maybe he or you can then provide a guide here on how to do it.
This device is rather new and the forum is building up so there is a lot of work to do and a lot of things have to be worked around.
Hope you can fix it, like I said, I cannot really help you properly since I never had the problem and therefore do not really understand what's happening on your device.
hi, thank you for the reply. In fact i have solved the problem few minutes ago, and was thinking on do a quick fix tutorial or something like that. Because it's really fast, just need to do the right way.
I'm really happy for the help i got in this forum, all the threads are really intersting. Going to try help others with the same problem that i had. Thank You
iDeadSmack said:
hi, thank you for the reply. In fact i have solved the problem few minutes ago, and was thinking on do a quick fix tutorial or something like that. Because it's really fast, just need to do the right way.
I'm really happy for the help i got in this forum, all the threads are really intersting. Going to try help others with the same problem that i had. Thank You
Click to expand...
Click to collapse
Could you help me with this problem i have the same problem on Huawei l-21 ??
Always have a backup of your fresh system on TWRP. Then whatever happen just restore it whenever you think you messed up your device and you should be fine ALWAYS.
Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.
Frank Morris said:
Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.
Click to expand...
Click to collapse
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way
harvir46 said:
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way
Click to expand...
Click to collapse
I tried it but did not worked. when i open device and printer, i can see DA USB VCOM PORT when battery is in and MTK USB PORT when battery is removed, i guess i should see preloader but that is not happening. when i connect karbonn without battery then i see preloader there and flashing get completed successfully.
Please help my phone is not charging, power buttons also not working, Tried to hard reset by pressing power button, volume up and down simultaneously but still phone does not respond.
I request members to help. i am trying from last 15 days.
raghubar said:
I tried it but did not worked. when i open device and printer, i can see DA USB VCOM PORT when battery is in and MTK USB PORT when battery is removed, i guess i should see preloader but that is not happening. when i connect karbonn without battery then i see preloader there and flashing get completed successfully.
Please help my phone is not charging, power buttons also not working, Tried to hard reset by pressing power button, volume up and down simultaneously but still phone does not respond.
I request members to help. i am trying from last 15 days.
Click to expand...
Click to collapse
Sorry but this thread limits to A350 only.
---------- Post added at 07:55 PM ---------- Previous post was at 07:50 PM ----------
Frank Morris said:
Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.
Click to expand...
Click to collapse
Using SP Flash Tool, flash the preloader.bin first.Use meta mode if not detected,all three buttons together while connecting and keep pressed until flashing starts.
If flashing was successful then your phone should at least be able to vibrate when you press the power button or boot if the correct files are present on your phone; else, flash other necessary files to make the phone boot up and start working normally again.
P.s. writing again and again is painful as I'm lazy-ass.
I'm thinking of making a thread about this but again,I'm lazy-ass.
it worked...wow...thanks ...but now it gets into a boot loop
harvir46 said:
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way
Click to expand...
Click to collapse
Thanks buddy, the phone started but now it ends into a bootloop. Tried getting into custom recovery and doing a factory reset. It starts and goes all the way through and finally restarts and the same thing again...bootloop....Please suggest what should I do...Thanks and God bless.
In the meanwhile i tried flashing a new custom ROM from xdafirmware.com. But the SP flash tools downloads upto 9.86MB and then the download stops...What could be the reason? Also please let me know if Miracle Box is any kind of solution for these kind of problems! Thanks and God bless.
Mr.Ak said:
Sorry but this thread limits to A350 only.
---------- Post added at 07:55 PM ---------- Previous post was at 07:50 PM ----------
Using SP Flash Tool, flash the preloader.bin first.Use meta mode if not detected,all three buttons together while connecting and keep pressed until flashing starts.
If flashing was successful then your phone should at least be able to vibrate when you press the power button or boot if the correct files are present on your phone; else, flash other necessary files to make the phone boot up and start working normally again.
P.s. writing again and again is painful as I'm lazy-ass.
I'm thinking of making a thread about this but again,I'm lazy-ass.
Click to expand...
Click to collapse
I am also talking about Micromax A350 and i am facing same problem
as written by thread creator.Please help me, all things mentioned in this thread i tried but none worked.
Please tell whether i should do all these step with battery or without battery.
Frank Morris said:
Thanks buddy, the phone started but now it ends into a bootloop. Tried getting into custom recovery and doing a factory reset. It starts and goes all the way through and finally restarts and the same thing again...bootloop....Please suggest what should I do...Thanks and God bless.
In the meanwhile i tried flashing a new custom ROM from xdafirmware.com. But the SP flash tools downloads upto 9.86MB and then the download stops...What could be the reason? Also please let me know if Miracle Box is any kind of solution for these kind of problems! Thanks and God bless.
Click to expand...
Click to collapse
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
www.canvasknightroms.blogspot.in
Good luck!
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
raghubar said:
I am also talking about Micromax A350 and i am facing same problem
as written by thread creator.Please help me, all things mentioned in this thread i tried but none worked.
Please tell whether i should do all these step with battery or without battery.
Click to expand...
Click to collapse
Do you even know A350's battery is non-removable?
The only way you can remove it is by disassembling the device but doing that will compromise with your battery life.It should only be used in worst case scenario and everything else fails to work!
Mr.Ak said:
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
Good luck!
First of all, I apologize for my mistake. It was not a custom ROM but a Canvas Knight Stock ROM... The file name is this...Micromax_A350_V2_040614_KitKat_(by_xdafirmware.com). It's a version 2 (unmerged storage). However, earlier I had flashed a version 3 (merged storage) ROM and since it was constantly giving me trouble I tried to reflash version 2 ROM...But unable to do so...it gets stuck at 9.6MB or 0% in the SP Flash tool.
I tried the format+download option too. But in vain. Guess I am doing something wrong! What could it be? Thanks and God bless.
Btw, I have been through your blog in the past and benefited from the same. Thanks
Click to expand...
Click to collapse
Frank Morris said:
Mr.Ak said:
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
Good luck!
First of all, I apologize for my mistake. It was not a custom ROM but a Canvas Knight Stock ROM... The file name is this...Micromax_A350_V2_040614_KitKat_(by_xdafirmware.com). It's a version 2 (unmerged storage). However, earlier I had flashed a version 3 (merged storage) ROM and since it was constantly giving me trouble I tried to reflash version 2 ROM...But unable to do so...it gets stuck at 9.6MB or 0% in the SP Flash tool.
I tried the format+download option too. But in vain. Guess I am doing something wrong! What could it be? Thanks and God bless.
Btw, I have been through your blog in the past and benefited from the same. Thanks
Click to expand...
Click to collapse
What was the problem with v3?
Click to expand...
Click to collapse
Version 3 problem...
Mr.Ak said:
What was the problem with v3?
Click to expand...
Click to collapse
Version 3 booted well the first time...it went all the way...i was setting it up nicely...and it hung and just stopped. Ever since then I tried to reboot it would not load...the Canvas Knight logo with the sound would come on and then restart or get hung at that point. In short, it would not fully boot anymore except for that once!
So I decided to do away with version 3 and thought version 2 would be fine because that's what was originally on my phone...but now this is the problem...i mean the SPFT gets hung at 0%.
Thanks and God bless you.
On a different note, I would still love to have version 3 if possible since I plan to install a custom ROM...most likely Cyanogenmod....
Latest update...
Latest Update…
I finally managed to successfully flash a Kitakat 4.4.2 vs. 2 (unmerged storage) stock rom…I downloaded the file again from xdafirmware.com and flashed it. There was no problem. The phone has started and its up since the last one hour or so.
Before booting I entered into stock recovery and did a wipe data/factory reset and also wipe cache partition. So far no problem. I have not yet switched on my wifi coz I am worried it might go off again and enter a bootloop.
Battery was 95% when booted...its now 94% since one hour...I have not used the phone at all though...
Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock rom. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the bootloader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the bootloader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3
Sorry for the trouble. But I have messed up many times in the last one month with innumerable flashing of the ROM’s and zip files. Now, once bitten twice shy I want to play safe.
So please let me know your thoughts if they are fail proof and time tested. Thanks for all your help. God bless.
Frank Morris said:
Latest Update…
I finally managed to successfully flash a Kitakat 4.4.2 vs. 2 (unmerged storage) stock rom…I downloaded the file again from xdafirmware.com and flashed it. There was no problem. The phone has started and its up since the last one hour or so.
Before booting I entered into stock recovery and did a wipe data/factory reset and also wipe cache partition. So far no problem. I have not yet switched on my wifi coz I am worried it might go off again and enter a bootloop.
Battery was 95% when booted...its now 94% since one hour...I have not used the phone at all though...
Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock rom. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the bootloader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the bootloader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3
Sorry for the trouble. But I have messed up many times in the last one month with innumerable flashing of the ROM’s and zip files. Now, once bitten twice shy I want to play safe.
So please let me know your thoughts if they are fail proof and time tested. Thanks for all your help. God bless.
Click to expand...
Click to collapse
Well I hate giving bad news to people but I might know what causing all this.
As you say,the phone booted fine now but you'll likely see random hangs and sudden reboots in using it,to be sure,use it for atleast 2 hrs constantly and then we can proceed further with your questions.
In mean time,check this post:
https://forum.xda-developers.com/showpost.php?p=69482562&postcount=697
Mr.Ak said:
Well I hate giving bad news to people but I might know what causing all this.
As you say,the phone booted fine now but you'll likely see random hangs and sudden reboots in using it,to be sure,use it for atleast 2 hrs constantly and then we can proceed further with your questions.
In mean time,check this post:
https://forum.xda-developers.com/showpost.php?p=69482562&postcount=697
Click to expand...
Click to collapse
Well I tried using it for a while...no internet...just going through settings and checking...then I enabled Developers options and connected USB. Tried to check if the phone was listed on ADB etc....but then it went into a bootloop and kept shutting down after periodic bootloops...now its totally down...not responding at all.
Anyway, I think I know how to get it back when everything else fail. Until then stay blessed and don't give up.
God bless.
Frank Morris said:
Well I tried using it for a while...no internet...just going through settings and checking...then I enabled Developers options and connected USB. Tried to check if the phone was listed on ADB etc....but then it went into a bootloop and kept shutting down after periodic bootloops...now its totally down...not responding at all.
Anyway, I think I know how to get it back when everything else fail. Until then stay blessed and don't give up.
God bless.
Click to expand...
Click to collapse
How?
The Phone has been up and about for the last 6 hours now...
Mr.Ak said:
How?
Click to expand...
Click to collapse
Hi, Sorry for the sudden disappearance. I really didn't know how to reply to your "HOW"? But I knew there was a CERTAIN possibility of getting the phone back...I call it faith in God. And I have plenty of faith and I believe in the impossible coz I have seen some of the most impossible things happen in my life and around me over the years. So plain hope and faith in God was what I banked on. But I have no logical explanation to give on the phone starting again smoothly. I have been struggling with this phone for the last 45 days. And this is the first time the phone has really stayed put and it got booted in just one go!
Also your signature line was a source of continued inspiration to hit out against all the odds and doubts.
I would now kindly appreciate any help in restoring the phone to full functionality...I mean would love to hear answers for my questions from the previous post.
In the meanwhile, I did a bit of study on the Miracle Box and a tool called ALL-IN-ONE-TOOL_V2.1...
But, I don't want to jump the gun and get going...Will wait for expert advice. Until then God bless us all. Stay blessed. And yes, thanks for all the help. Shalom.
Frank Morris said:
Hi, Sorry for the sudden disappearance. I really didn't know how to reply to your "HOW"? But I knew there was a CERTAIN possibility of getting the phone back...I call it faith in God. And I have plenty of faith and I believe in the impossible coz I have seen some of the most impossible things happen in my life and around me over the years. So plain hope and faith in God was what I banked on. But I have no logical explanation to give on the phone starting again smoothly. I have been struggling with this phone for the last 45 days. And this is the first time the phone has really stayed put and it got booted in just one go!
Also your signature line was a source of continued inspiration to hit out against all the odds and doubts.
I would now kindly appreciate any help in restoring the phone to full functionality...I mean would love to hear answers for my questions from the previous post.
In the meanwhile, I did a bit of study on the Miracle Box and a tool called ALL-IN-ONE-TOOL_V2.1...
But, I don't want to jump the gun and get going...Will wait for expert advice. Until then God bless us all. Stay blessed. And yes, thanks for all the help. Shalom.
Click to expand...
Click to collapse
You don't need all those tool box.
Sp flash tools is enough to give life to your device.
Help required to set up the device fully...now that it is working!
Mr.Ak said:
You don't need all those tool box.
Sp flash tools is enough to give life to your device.
Click to expand...
Click to collapse
Hi Ak,
Thanks for your reply. My device is up and about since the last hmmm...to be exact...26 hours. I didn't have any reboots or bootloops or anything for that matter.
However, I need to set it up complete...customization I mean...and these are some of the problems I am facing... Quoting a part of the previous post to save typing...
Quote "Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock ROM. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the boot-loader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the boot-loader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3" Unquote.
In the meanwhile, I have done a little bit of study and RnD of the miracle box/MTK Droid Tools/S&N Writer tool etc. on my old Canvas HD 116. And I realized that the Miracle Box is one good tool. The IMEI No. can be changed in a jiffy. Rooting is extremely easy using this box. I did via adb.
In short, a bit too confused with too much knowledge on hand. Looking for wisdom to apply this knowledge correctly. There could be many simpler ways too!!! Any help in this regard is much appreciated.
Thanks and God bless us all. Shalom.
Frank Morris said:
Hi Ak,
Thanks for your reply. My device is up and about since the last hmmm...to be exact...26 hours. I didn't have any reboots or bootloops or anything for that matter.
However, I need to set it up complete...customization I mean...and these are some of the problems I am facing... Quoting a part of the previous post to save typing...
Quote "Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock ROM. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the boot-loader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the boot-loader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3" Unquote.
In the meanwhile, I have done a little bit of study and RnD of the miracle box/MTK Droid Tools/S&N Writer tool etc. on my old Canvas HD 116. And I realized that the Miracle Box is one good tool. The IMEI No. can be changed in a jiffy. Rooting is extremely easy using this box. I did via adb.
In short, a bit too confused with too much knowledge on hand. Looking for wisdom to apply this knowledge correctly. There could be many simpler ways too!!! Any help in this regard is much appreciated.
Thanks and God bless us all. Shalom.
Click to expand...
Click to collapse
Okay don't panic!
Clearly your device is fine by hardware stuff so let's fix some myths and problem of yours.
Firstly,this is mt6592 so you don't have to unlock any boot loader stuff.You can just root your device using kingroot or kingoroot(google it).
For more please read out this whole section,
https://canvasknightroms.blogspot.com/2015/10/rooting-canvas-knight.html?m=1
Now I believe you have root by now. Now all you need to do is get a recovery and as you're on v2 you can find it here,
https://drive.google.com/file/d/0B5W6R0DsDjWTU1o3TEpfWGFsMEE/view
This is philz recovery with OTG support.As you've root just download the IMG file and flash it though flashify,you can find it on Play store.So you've recovery!
Again,these are just suggested methods,you can do all that with other methods too.Also please stop wasting time on stuffs like miracle boxes and etc etc.
Secondly to get your imei back it would be very easy as you've recovery.
https://drive.google.com/file/d/0B6-QF5uchBNhbFlfVk1wOEthbms/view
Just flash this file in recovery and everything shld be fine.
Now to fix Nvram error,just extract the folder from this backup zip,
https://drive.google.com/file/d/0ByuIKfMkBBxBaXBZRHJnNHVRMVk/view
And using any root explorer(I prefer es file manager) go to /data root and replace nvram folder with the folder in this zip
Now the best recovery would be philz recovery for v2 but I greatly suggest you to flash v3 for a variety of reasons and custom ROMs.Yes,you need to shift to v3 to get LP or MM and new updated ROMs though you can still flash available ROMs for v2 which you can find here,
https://canvasknightroms.blogspot.in/2015/10/all-roms-link-for-v2.html?m=1
Very less isn't it? That's because storage barrier in v2.
You can find various mods here,
https://canvasknightroms.blogspot.in/2015/10/mods.html?m=1
You can find correct stock ROMs here,
https://canvasknightroms.blogspot.in/2015/10/stock-rom.html?m=1
Flashing the sim fix above will eventually fix SN too.
And yes many custom ROMs are bundled with SuperSU so you should use that.
To convert from kingroot user to super su use this guide,
https://forum.xda-developers.com/ca...ck-switch-kingroot-to-supersu-easily-t3426965
And lastly mtkdroidtools is a good tool and you should definitely have it just in case for backing up stuff and tinkering with ADB.
With all that said,you should join our Whatsapp group for more faster help and updates by messaging me on my Whatsapp No. +919468519959
Enjoy!
Edit: writing all this is a pain in ass,at least one thanks is deserved
Thank you so much...
Mr.Ak said:
Okay don't panic!
Clearly your device is fine by hardware stuff so let's fix some myths and problem of yours.
Firstly,this is mt6592 so you don't have to unlock any boot loader stuff.You can just root your device using kingroot or kingoroot(google it).
For more please read out this whole section,
https://canvasknightroms.blogspot.com/2015/10/rooting-canvas-knight.html?m=1
Now I believe you have root by now. Now all you need to do is get a recovery and as you're on v2 you can find it here,
https://drive.google.com/file/d/0B5W6R0DsDjWTU1o3TEpfWGFsMEE/view
This is philz recovery with OTG support.As you've root just download the IMG file and flash it though flashify,you can find it on Play store.So you've recovery!
Again,these are just suggested methods,you can do all that with other methods too.Also please stop wasting time on stuffs like miracle boxes and etc etc.
Secondly to get your imei back it would be very easy as you've recovery.
https://drive.google.com/file/d/0B6-QF5uchBNhbFlfVk1wOEthbms/view
Just flash this file in recovery and everything shld be fine.
Now to fix Nvram error,just extract the folder from this backup zip,
https://drive.google.com/file/d/0ByuIKfMkBBxBaXBZRHJnNHVRMVk/view
And using any root explorer(I prefer es file manager) go to /data root and replace nvram folder with the folder in this zip
Now the best recovery would be philz recovery for v2 but I greatly suggest you to flash v3 for a variety of reasons and custom ROMs.Yes,you need to shift to v3 to get LP or MM and new updated ROMs though you can still flash available ROMs for v2 which you can find here,
https://canvasknightroms.blogspot.in/2015/10/all-roms-link-for-v2.html?m=1
Very less isn't it? That's because storage barrier in v2.
You can find various mods here,
https://canvasknightroms.blogspot.in/2015/10/mods.html?m=1
You can find correct stock ROMs here,
https://canvasknightroms.blogspot.in/2015/10/stock-rom.html?m=1
Flashing the sim fix above will eventually fix SN too.
And yes many custom ROMs are bundled with SuperSU so you should use that.
To convert from kingroot user to super su use this guide,
https://forum.xda-developers.com/ca...ck-switch-kingroot-to-supersu-easily-t3426965
And lastly mtkdroidtools is a good tool and you should definitely have it just in case for backing up stuff and tinkering with ADB.
With all that said,you should join our Whatsapp group for more faster help and updates by messaging me on my Whatsapp No. +919468519959
Enjoy!
Edit: writing all this is a pain in ass,at least one thanks is deserved
Click to expand...
Click to collapse
Hi Ak,
I went through your entire post and more or less got most of the useful and helpful information. I have not gone through all the links and will do so in due course.
I have been on your website and have read quite a bit and was happy to see the dedication and commitment to help people like us.
I am sure the phone like you said is stable and away from hardware issues. I will consider flashing vs. 3 soon. Yes, i agree with you there are more choices for vs. 3. I did peep into the website last week to see the big list of custom ROM's for vs. 3.
Last but not the least, God bless you. Shalom.
Frank Morris said:
Hi Ak,
I went through your entire post and more or less got most of the useful and helpful information. I have not gone through all the links and will do so in due course.
I have been on your website and have read quite a bit and was happy to see the dedication and commitment to help people like us.
I am sure the phone like you said is stable and away from hardware issues. I will consider flashing vs. 3 soon. Yes, i agree with you there are more choices for vs. 3. I did peep into the website last week to see the big list of custom ROM's for vs. 3.
Last but not the least, God bless you. Shalom.
Click to expand...
Click to collapse
What about joining our whatsapp group?
Hi everyone,
I just updated my Asus Zenpad 10 (Z300M) via OTA.
The tablet booted and I saw the Lock screen. But after a couple of second it reboot.
I've tried a factory reset. BU it's the same probleme: It boot up to the "first start" prompt, and after a couple of second reboot.
I tried to install a custom recovery to flash a new rom with SP-Flash Tool (following this post nstalling TWRP and rooting Asus Zenpad 10 (Z300m))
But I got an error when I readBack.
And even if I flash the recovery, I can't access it on the tablet. I got a message "Your device has failed verification and may not work properly" when I try to go to recovery
Can you help me with this ?
Thank you
Same problem. When WiFi is ON.
When I put WiFi OFF - the tablet works fine.
Last firmware doesn't help, reset too. I think there is no solution at this moment, except maybe to flash an old firmware with Android 6.
I'll replace it in store. No idea about Asus control quality of their firmware... but this problem is pretty common.
???
Belnadifia said:
Hi everyone,
I just updated my Asus Zenpad 10 (Z300M) via OTA.
The tablet booted and I saw the Lock screen. But after a couple of second it reboot.
I've tried a factory reset. BU it's the same probleme: It boot up to the "first start" prompt, and after a couple of second reboot.
I tried to install a custom recovery to flash a new rom with SP-Flash Tool (following this post nstalling TWRP and rooting Asus Zenpad 10 (Z300m))
But I got an error when I readBack.
And even if I flash the recovery, I can't access it on the tablet. I got a message "Your device has failed verification and may not work properly" when I try to go to recovery
Can you help me with this ?
Thank you
Click to expand...
Click to collapse
What I do not understand! Purchased this tablet due to the thread you mention on here for TWRP using the SP Flash Tool 5.132, right? I just went ahead and used the SP Flash Tool version been using and got that individual error right at the end so did NOT try flashing the recovery! He was very talkative B4 getting this tablet but now after speaking of errors, no responses.....? The version SPFL he says is the only one that works, its option.ini file DOES NOT have the READBACK part in it for changing from false to true...... the very next versions of SPFT after do.....
any ideas????
zach
coolbeans2016 said:
What I do not understand! Purchased this tablet due to the thread you mention on here for TWRP using the SP Flash Tool 5.132, right? I just went ahead and used the SP Flash Tool version been using and got that individual error right at the end so did NOT try flashing the recovery! He was very talkative B4 getting this tablet but now after speaking of errors, no responses.....? The version SPFL he says is the only one that works, its option.ini file DOES NOT have the READBACK part in it for changing from false to true...... the very next versions of SPFT after do.....
any ideas????
zach
Click to expand...
Click to collapse
Bro, are you serious? I don't reply to your messages for a few hours so you call that whole recovery/rooting thread some kind of a scam or conspiracy? (This is not my day job btw.) The error messages you are talking about are a result of you rushing into this thing and not doing your homework, skimming the directions and/or failing to use common sense. Of course SPFT 5.1532 does not have the read-by-partition option. That's why we use a later version for that. Exactly as it says in the OP. And if you were to do your homework, you would find out that the "..failed verification.." and/or "...different operating system.." messages are expected because of verified boot process built into the bootloader.
I'll give you that
diplomatic said:
Bro, are you serious? I don't reply to your messages for a few hours so you call that whole recovery/rooting thread some kind of a scam or conspiracy? (This is not my day job btw.) The error messages you are talking about are a result of you rushing into this thing and not doing your homework, skimming the directions and/or failing to use common sense. Of course SPFT 5.1532 does not have the read-by-partition option. That's why we use a later version for that. Exactly as it says in the OP. And if you were to do your homework, you would find out that the "..failed verification.." and/or "...different operating system.." messages are expected because of verified boot process built into the bootloader.
Click to expand...
Click to collapse
The link on the Z380M is what threw a flag for me because that Asus tab isnt rootable. If this is some combo of slipups between tools & devices that lines up just right to get TWRP on its not described very well in the OP. Using the 5.132 (?) you can not readback with that option.ini file.... so what am I missing? The bootloader unlock app isn't written for this tablet is it? written for the zenphone 2 (3)?
Wow, I'm not sure if you're trolling at this point or what. If your ASUS ZenPad 10 Z300M tablet is not rootable, then you are the first one to report such a device on XDA. You still keep saying you can't readback with SPFT "5.132". I hate to sound pedantic, but I think it's better if I make my reply in list form.
There is no 5.132. The recommended version is 5.1532.
SP Flash Tool version 5.1532 does not have the "ShowByScatter" feature at all, as I've told you at least twice.
You can read back any part of the flash ROM by specifying the range manually in 5.1532 or other versions.
You can read back by partitions specified in the scatter file by enabling "ShowByScatter" with SPFT 5.1548 or higher only.
You can flash to this device by using SPFT 5.1532 only (and a couple of older versions).
As for the guide not being clear
I did not write that guide. That is @justshaun's post. I only wrote one section of it and made some corrections to other parts.
Yes, you might encounter some stumbling blocks when blindly following the steps without knowing why you are doing them. But this is a good thing, to be honest. Because if you don't understand even a little bit about what you're doing, and are not able to solve those types of problems, then you have not crossed the pretty low bar for safely modifying your device. In that case, I think you're better off not bothering with this whole recovery/root thing. It's for your device's safety.
All of the problems that you're having have probably been discussed in one thread or the other.
As for the bootloader unlocker
I have never used the unlock tool.
It does not work sometimes, maybe even most of the time.
ASUS has removed the link to it from their download page
Take it up with ASUS if you want to make it work.
Just want to mention for anyone else struggling with this issue, what fixed it for me:
I found the reboot would only happen when wifi was turned on, and even more weird, it would only happen when connected to specific wifi networks. After doing a factory reset I was able to set it up again by tethering to the wifi on my phone. I then found that I actually was able to connect to the problematic wifi network but only by setting a static IP! This has completely resolved the issue for me.
Thaniks
diplomatic said:
Wow, I'm not sure if you're trolling at this point or what. If your ASUS ZenPad 10 Z300M tablet is not rootable, then you are the first one to report such a device on XDA. You still keep saying you can't readback with SPFT "5.132". I hate to sound pedantic, but I think it's better if I make my reply in list form.
There is no 5.132. The recommended version is 5.1532.
SP Flash Tool version 5.1532 does not have the "ShowByScatter" feature at all, as I've told you at least twice.
You can read back any part of the flash ROM by specifying the range manually in 5.1532 or other versions.
You can read back by partitions specified in the scatter file by enabling "ShowByScatter" with SPFT 5.1548 or higher only.
You can flash to this device by using SPFT 5.1532 only (and a couple of older versions).
As for the guide not being clear
I did not write that guide. That is @justshaun's post. I only wrote one section of it and made some corrections to other parts.
Yes, you might encounter some stumbling blocks when blindly following the steps without knowing why you are doing them. But this is a good thing, to be honest. Because if you don't understand even a little bit about what you're doing, and are not able to solve those types of problems, then you have not crossed the pretty low bar for safely modifying your device. In that case, I think you're better off not bothering with this whole recovery/root thing. It's for your device's safety.
All of the problems that you're having have probably been discussed in one thread or the other.
As for the bootloader unlocker
I have never used the unlock tool.
It does not work sometimes, maybe even most of the time.
ASUS has removed the link to it from their download page
Take it up with ASUS if you want to make it work.
Click to expand...
Click to collapse
I have downloaded everything in the OP again and will attempt to get twrp on tablet again. I did notice one item that was causing my problem that you could call a newbie f/u... I'm using a new browser that has adblock builtin & on by default and it was causing the "loop" when trying to download the recommended SP Flash tools. I got the ones from the link downloaded and they have more internal components like the newer SP Flash Tool versions....... My bad.
Will go through the steps again hopefully later today, my apologies man.
zls
coolbeans2016 said:
I have downloaded everything in the OP again and will attempt to get twrp on tablet again. I did notice one item that was causing my problem that you could call a newbie f/u... I'm using a new browser that has adblock builtin & on by default and it was causing the "loop" when trying to download the recommended SP Flash tools. I got the ones from the link downloaded and they have more internal components like the newer SP Flash Tool versions....... My bad.
Will go through the steps again hopefully later today, my apologies man.
zls
Click to expand...
Click to collapse
Ohhh... ok. No problem man. Just please get your facts straight before posting next time. Good luck. BTW, I'm not sure if you saw this post on the TWRP thread from 2 weeks ago. You didn't reply.
diplomatic said:
What is the error that you got when trying to flash it? Can you post a screenshot of the Download tab along with the Help/About dialog box?
Click to expand...
Click to collapse
Hi, guys.
Today, my OP5 decided to troll me. I was using normally him, when suddenly it started to lags pretty bad. I restarted and he continued to lags and freeze. I made a wipe cache via stock recovery (i didnt made any change at all in it, no unlocked bootloader, no root). That's when my nightmare begins. It begins to bootloop. Sometimes i was able to start the boot animation, but then it just restarts to the beginning. I tried a lot of tips, wiping cache, system, etc. Then, i left it charging. When i tried to turn on again, it worked like nothing ever happened to him. I made a backup of my personal data fast, scared to him suddenly restart again. After that, i decided to made a Factory Reset, clean up everything. When i did it, he started the lag and freezes again. I was at lost. That's was when i decided to use the official unbrick tool, to make the cleanest OP5 ever possible. I grabbed the archives from this link and followed this tutorial. When i was executing the programa, in the userdate.img, he showed a error. When i saw it, i just stopped and closed the program. Now, my OP5 is hardbricked. The only sign of life that i get from him is when i connect him at the PC. I can identify it as qualcoom 9008, but when i try to run the program, he just fail and show me error 258.
Plz, i need some orientations. I have been read things for about 10 hours and didnt found a solution. I live abroad for any oneplus tech center, and i believe, for the other posts that i read, that online tech support wouldn't help me a lot. I really don't like to make this kind of post but i am kind of desesperate. I dont have money to afford another phone
Again, sry to disturb you all. Sry if i broke some rule of the forum too. And sry for my bad english, i hope that i was able to communicate right.
EDIT: I just tried in another computer. Same error appears. :'(
Hummm why follow a Unbrick Topic with tools for ...3T ?
Maybe you have a encryption problem, all your Tools/Topic are so old for the actual versions (Oreo 8.X OOS / 8.1 OOS)
I advise to you (in the first time), to flash this TWRP (using fastboot, very simple) just follow this guide : here
If you can flash TWRP, your phone is not bricked, you will boot in TWRP:
- Format Data > tape "yes" > Reboot in TWRP
- Copy/Past xXx 10.0 ROM to test, install and xXx Rom will fix/install for you the best OOS Custom ROM for your OP5 with a great Aroma Installer.
If TWRP with this rom work perfectly, you wil able to restore a official stock OOS for sure, just flash original/stock recovery (fastboot), wipe all data/partitions, install your OOS rom and it's fine
I think @cidsantiago says they bootloader isn't unlocked.
He needs to know that unlock the bootloader implies lost all /sdcard data and also installed apps and settings) before start the TWRP install process...
Pho3nX said:
Hummm why follow a Unbrick Topic with tools for ...3T ?
Maybe you have a encryption problem, all your Tools/Topic are so old for the actual versions (Oreo 8.X OOS / 8.1 OOS)
I advise to you (in the first time), to flash this TWRP (using fastboot, very simple) just follow this guide : here
If you can flash TWRP, your phone is not bricked, you will boot in TWRP:
- Format Data > tape "yes" > Reboot in TWRP
- Copy/Past xXx 10.0 ROM to test, install and xXx Rom will fix/install for you the best OOS Custom ROM for your OP5 with a great Aroma Installer.
If TWRP with this rom work perfectly, you wil able to restore a official stock OOS for sure, just flash original/stock recovery (fastboot), wipe all data/partitions, install your OOS rom and it's fine
Click to expand...
Click to collapse
Pho3nX said:
Hummm why follow a Unbrick Topic with tools for ...3T ?
Click to expand...
Click to collapse
I used the tools for 5. Just the procedure that i get from this topic. :T I am gonna try the method that you gave me now brb.
EDIT: Just tried this. My cellphone cant be recognized in fastboot devices. As a said, i am not getting any response for him, just when i plug it in the PC. So i wasn't able to unlock bootload or anything like that. I tried just to plug it and see if fastboot was able to identifying it, but it wasn't.
bartito said:
I think @cidsantiago says they bootloader isn't unlocked.
He needs to know that unlock the bootloader implies lost all /sdcard data and also installed apps and settings) before start the TWRP install process...
Click to expand...
Click to collapse
Yes, it should not be unlocked. But at the moment, i am taking anything, really. I just want to use my phone.
cidsantiago said:
Yes, it should not be unlocked. But at the moment, i am taking anything, really. I just want to use my phone.
Click to expand...
Click to collapse
Wipe your device data from the stock recovery.
You loss the settings and downloaded apps but not requires to unlock the bootloader.
bartito said:
Wipe your device data from the stock recovery.
You loss the settings and downloaded apps but not requires to unlock the bootloader.
Click to expand...
Click to collapse
I can't access recovery anymore, as i said. The only sign of life that i get is when i connect it in the PC.
I guess i have to do something to restore the basics partitions of my cellphone. Like recovery, boot, etc. But i just have the official tool to do that. There is another way? Like transfering directly by the COM port?
Have you tried following this guide? https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
---------- Post added at 01:30 PM ---------- Previous post was at 01:26 PM ----------
I had the same exact problem with my old One plus One. Spent like 4 days trying to unbrick it. That msm tool did the fix for me. Also, in that link to the guide you provided, doesn't it flash the Chinese version of the OS? If that's the case, I don't think it was a good idea to do so lol
Mash1ro said:
Have you tried following this guide? https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
---------- Post added at 01:30 PM ---------- Previous post was at 01:26 PM ----------
I had the same exact problem with my old One plus One. Spent like 4 days trying to unbrick it. That msm tool did the fix for me. Also, in that link to the guide you provided, doesn't it flash the Chinese version of the OS? If that's the case, I don't think it was a good idea to do so lol
Click to expand...
Click to collapse
In one of the links, it had the OOS and the HOS. I tried to use the msm tool in one of them, but it didnt worked I'm gonna try the archives in this link that you gave me. It may work brb with updates.
Don't worry though, it happens to plenty of people. It happened to me as well, and everyone eventually fixes it. It is unlikely that it is a hardware problem, so just following the correct steps should get it working. Keep trying stuff out, it's very good that your computer recognizes it as a qualcomm port, as far as I know that's all you need to flash the necessary things in order for it to boot.
I am getting the same error 258 in this post. :T I posted there to see if the OP can help me. But thx for your help @Mash1ro
Mash1ro said:
Don't worry though, it happens to plenty of people. It happened to me as well, and everyone eventually fixes it. It is unlikely that it is a hardware problem, so just following the correct steps should get it working. Keep trying stuff out, it's very good that your computer recognizes it as a qualcomm port, as far as I know that's all you need to flash the necessary things in order for it to boot.
Click to expand...
Click to collapse
Thx for your support! I will continue to try stuff
Try reading the comments from this post as well https://forum.xda-developers.com/oneplus-3t/help/hard-bricked-op3t-t3574720/page2
2 of the people had the same error as you, and one of them solved the issue by changing the USB port.
---------- Post added at 02:26 PM ---------- Previous post was at 02:23 PM ----------
But don't use the same files and all that stuff, since that's for the 3T. Try to pick out the things that might help but use the files for the OnePlus 5 only
After try the unbrick procedure in 3 different PCs, using about 10 different USB ports, i still getting the same error in the same step. When downloading cache.img, he stuck in about mid bar, and shows me the warning: SendProgramCommand Failed, Error: 258". Besides that, he turns on the green led and stop being recognize by the PC. Then i have to hold power and turn off the green led. :T Maybe i can use a linux to access the partitions?
cidsantiago said:
After try the unbrick procedure in 3 different PCs, using about 10 different USB ports, i still getting the same error in the same step. When downloading cache.img, he stuck in about mid bar, and shows me the warning: SendProgramCommand Failed, Error: 258". Besides that, he turns on the green led and stop being recognize by the PC. Then i have to hold power and turn off the green led. :T Maybe i can use a linux to access the partitions?
Click to expand...
Click to collapse
it seems like a hardware problem, i was facing this on different phone ( 5X )
Apayah said:
it seems like a hardware problem, i was facing this on different phone ( 5X )
Click to expand...
Click to collapse
yeah... But it is kind of weird. He was running smoothly, until suddenly started lag and freeze. He didn't fall or any of that... I think is just a defective phone. Doesn't find another explanation to that.
I think your best option is to RMA the device through OnePlus. Since you haven't rooted it or anything, they should repair it for you.
david19au said:
I think your best option is to RMA the device through OnePlus. Since you haven't rooted it or anything, they should repair it for you.
Click to expand...
Click to collapse
I already contact the store that i bought to get my warranty. Unfortunately, i didn't bought it in oneplus.net, bcs they don't deliver in my country. I am hoping that everything work out
Guys, in the end, i RMA my device back to the seller and gonna have a refund Thank you for your help. So sad that this phone came faulty :T
Best regards to you all!
I made a huge mistake with my Asus Zenphone 5Q (ZC600KL) and I'm freaking out. I rooted my phone and I accidentally deleted - like actually deleted - some google apps that I shouldn't have. So I thought oh hey no big deal I'll just reset the phone in TWRP. I ended up completely wiping my OS. So I went to the Asus website and downloaded the stock firmware for my device just to find out when I try to install it in TWRP I get an error that prevents me from installing it. I double checked and it is the correct firmware that I downloaded but in TWRP installer it says "Updater process ended with Error 7" and it also says "E3004: This package is for "ASUS_X017D_2" devices; this is a "wt89199"". So I tried looking for the WT89199 stock firmware online and there is next to nothing other than literally ONE google drive link that isn't even working which doesn't even make sense. The asus website doesn't seem to have this stock firmware.
I feel really hopeless I've never messed up this bad before and I feel like I've looked everywhere and I just can't find any solutions this time. This is pretty much my last resort. If anyone knows how where I can get the right firmware or fix TWRP so I can install the firmware from the ASUS website, I would be so grateful. I'm completely out of options..
UPDATE: I think I may have found a solution with the right firmware but I still can't boot it up. Here is the link to the files ( https :// mshare.io /file/2fSAy4 - remove the spaces I'm new so I can't post links ) if someone more experienced could look at them and determine how I should go about getting it on my device. Right now I have no OS and can only access TWRP. Anyone know what to do with this?[/B]
UPDATE - SOLUTION: THANK GOD IN THE HEAVENS I'VE FIGURED IT OUT. MY PHONE IS FIXED. Someone please pin this or save it or something because I've seen a few other people with this issue and no resolved answers anywhere so if you are struggling with this issue, HERE IS THE SOLUTION for the ASUS Zenphone 5Q ZC600KL. If you're a dumbass like me and accidentally wiped your OS like I did and you were lucky enough to have TWRP and fastboot still available, you still have a fighting chance. Go to https :// mshare.io /file/2fSAy4 (remove the spaces) and download the file. I already scanned it and there are no viruses but feel free to also do so yourself. Next, you are going to want to extract the file into its own folder. Plug your device into your computer via USB cable and start your device up into fastboot mode. Now, inside the folder you just extracted is a file called "SOP_to_flash_Images_by_fastboot_v1.1-en". Open that and it has instructions for both Windows and Linux operating systems to flash these files onto your device.
Side note: if you get an error that says something like "target didn't report max-download-size sending 'modem' fastboot mode..." etc etc after executing "flashall_AFT.cmd 1", try plugging your usb cable into a different port. I had this issue and switched ports and everything worked smoothly after and all the files will automatically flash onto your device.
If there are any mods that can add the download file directly to this post in case it ends up getting taken down in the future, this would be so incredibly helpful because there are currently no solutions to this issue other than this post. There really isn't much recovery info out there at all about the Asus Zenphone 5Q so I hope this will be a first step!
emilienicole said:
I made a huge mistake with my Asus Zenphone 5Q (ZC600KL) and I'm freaking out. I rooted my phone and I accidentally deleted - like actually deleted - some google apps that I shouldn't have. So I thought oh hey no big deal I'll just reset the phone in TWRP. I ended up completely wiping my OS. So I went to the Asus website and downloaded the stock firmware for my device just to find out when I try to install it in TWRP I get an error that prevents me from installing it. I double checked and it is the correct firmware that I downloaded but in TWRP installer it says "Updater process ended with Error 7" and it also says "E3004: This package is for "ASUS_X017D_2" devices; this is a "wt89199"". So I tried looking for the WT89199 stock firmware online and there is next to nothing other than literally ONE google drive link that isn't even working which doesn't even make sense. The asus website doesn't seem to have this stock firmware.
I feel really hopeless I've never messed up this bad before and I feel like I've looked everywhere and I just can't find any solutions this time. This is pretty much my last resort. If anyone knows how where I can get the right firmware or fix TWRP so I can install the firmware from the ASUS website, I would be so grateful. I'm completely out of options..
UPDATE: I think I may have found a solution with the right firmware but I still can't boot it up. Here is the link to the files ( https :// mshare.io /file/2fSAy4 - remove the spaces I'm new so I can't post links ) if someone more experienced could look at them and determine how I should go about getting it on my device. Right now I have no OS and can only access TWRP. Anyone know what to do with this?[/B]
UPDATE - SOLUTION: THANK GOD IN THE HEAVENS I'VE FIGURED IT OUT. MY PHONE IS FIXED. Someone please pin this or save it or something because I've seen a few other people with this issue and no resolved answers anywhere so if you are struggling with this issue, HERE IS THE SOLUTION for the ASUS Zenphone 5Q ZC600KL. If you're a dumbass like me and accidentally wiped your OS like I did and you were lucky enough to have TWRP and fastboot still available, you still have a fighting chance. Go to https :// mshare.io /file/2fSAy4 (remove the spaces) and download the file. I already scanned it and there are no viruses but feel free to also do so yourself. Next, you are going to want to extract the file into its own folder. Plug your device into your computer via USB cable and start your device up into fastboot mode. Now, inside the folder you just extracted is a file called "SOP_to_flash_Images_by_fastboot_v1.1-en". Open that and it has instructions for both Windows and Linux operating systems to flash these files onto your device.
Side note: if you get an error that says something like "target didn't report max-download-size sending 'modem' fastboot mode..." etc etc after executing "flashall_AFT.cmd 1", try plugging your usb cable into a different port. I had this issue and switched ports and everything worked smoothly after and all the files will automatically flash onto your device.
If there are any mods that can add the download file directly to this post in case it ends up getting taken down in the future, this would be so incredibly helpful because there are currently no solutions to this issue other than this post. There really isn't much recovery info out there at all about the Asus Zenphone 5Q so I hope this will be a first step!
Click to expand...
Click to collapse
THANKS A LOT. your dumbness help me !!!
sir please help me yuor saying is the same my problem i have asus zenfone 5q and install TWRP with no OS please please help
Beware No Wifi
I followed this process and it wiped my IMEI and all radio programming on my phone. Beware of this beforehand. You won't be able to use wifi or cellular afterwords.
[email protected] said:
sir please help me yuor saying is the same my problem i have asus zenfone 5q and install TWRP with no OS please please help
---------- Post added at 05:04 AM ---------- Previous post was at 05:01 AM ----------
aschnyder26 said:
I followed this process and it wiped my IMEI and all radio programming on my phone. Beware of this beforehand. You won't be able to use wifi or cellular afterwords.
Click to expand...
Click to collapse
if you backed up all the partitions of your phone prior to tweaking . Nothing wrong could have happen.
Please tell me how you unlock bootloader of your zc600kl ?
Click to expand...
Click to collapse
emilienicole said:
I made a huge mistake with my Asus Zenphone 5Q (ZC600KL) and I'm freaking out. I rooted my phone and I accidentally deleted - like actually deleted - some google apps that I shouldn't have. So I thought oh hey no big deal I'll just reset the phone in TWRP. I ended up completely wiping my OS. So I went to the Asus website and downloaded the stock firmware for my device just to find out when I try to install it in TWRP I get an error that prevents me from installing it. I double checked and it is the correct firmware that I downloaded but in TWRP installer it says "Updater process ended with Error 7" and it also says "E3004: This package is for "ASUS_X017D_2" devices; this is a "wt89199"". So I tried looking for the WT89199 stock firmware online and there is next to nothing other than literally ONE google drive link that isn't even working which doesn't even make sense. The asus website doesn't seem to have this stock firmware.
I feel really hopeless I've never messed up this bad before and I feel like I've looked everywhere and I just can't find any solutions this time. This is pretty much my last resort. If anyone knows how where I can get the right firmware or fix TWRP so I can install the firmware from the ASUS website, I would be so grateful. I'm completely out of options..
UPDATE: I think I may have found a solution with the right firmware but I still can't boot it up. Here is the link to the files ( https :// mshare.io /file/2fSAy4 - remove the spaces I'm new so I can't post links ) if someone more experienced could look at them and determine how I should go about getting it on my device. Right now I have no OS and can only access TWRP. Anyone know what to do with this?
UPDATE - SOLUTION: [/B]THANK GOD IN THE HEAVENS I'VE FIGURED IT OUT. MY PHONE IS FIXED. Someone please pin this or save it or something because I've seen a few other people with this issue and no resolved answers anywhere so if you are struggling with this issue, HERE IS THE SOLUTION for the ASUS Zenphone 5Q ZC600KL. If you're a dumbass like me and accidentally wiped your OS like I did and you were lucky enough to have TWRP and fastboot still available, you still have a fighting chance. Go to https :// mshare.io /file/2fSAy4 (remove the spaces) and download the file. I already scanned it and there are no viruses but feel free to also do so yourself. Next, you are going to want to extract the file into its own folder. Plug your device into your computer via USB cable and start your device up into fastboot mode. Now, inside the folder you just extracted is a file called "SOP_to_flash_Images_by_fastboot_v1.1-en". Open that and it has instructions for both Windows and Linux operating systems to flash these files onto your device.
Side note: if you get an error that says something like "target didn't report max-download-size sending 'modem' fastboot mode..." etc etc after executing "flashall_AFT.cmd 1", try plugging your usb cable into a different port. I had this issue and switched ports and everything worked smoothly after and all the files will automatically flash onto your device.
If there are any mods that can add the download file directly to this post in case it ends up getting taken down in the future, this would be so incredibly helpful because there are currently no solutions to this issue other than this post. There really isn't much recovery info out there at all about the Asus Zenphone 5Q so I hope this will be a first step!
Click to expand...
Click to collapse
I have the same phone Asus ZenFone ZC600KL X017DA
This phone is actually the wife's but she handed it over to me because it was stuck on the Asus Logo and there is no recovery options the only 2 modes it has is CSC fastboot mode and EDL mode .. fastboot commands detects the phone and will display a serial number that match what's on the phones box device information states false under bootloader unlocked same with unlock critical
Trying to flashall will just throw up an error write protected
Issue is I cannot unlock the bootloader with the given tool from Asus as it's an apk file and phone doesn't boot and for the same reason I cannot enable OEM unlock and debugging
So kinda screwed and based on all the firmwares that Asus has for this phone I'm guessing around 15 maybe more from early 2018 until now so I cannot be sure I even got the right version
I have to make clear this phone has NEVER been rooted or modded in anyway not unless you count cracked screen glass as a mod haha
I should note the ball n chain did say for a while the phone was getting a bit hot I put that down to the fact she has mobile data active always and making videos and charging at same time