Database Users

bcm4329.ko module k2.6.36.3-00001-g9b3ce2b

i really need the bcm module for kernel 2.6.36.3-00001-g9b3ce2b will someone please post for me thank i keep getting wifi error!!

b3ltazar said:
i really need the bcm module for kernel 2.6.36.3-00001-g9b3ce2b will someone please post for me thank i keep getting wifi error!!
Click to expand...
Click to collapse
+1.
Need the following modules: bcm4329.ko and scsi_wait_scan.ko

Juzman said:
+1.
Need the following modules: bcm4329.ko and scsi_wait_scan.ko
Click to expand...
Click to collapse
found them in one of the backups hope they work they are for your kernel
good luck
PS: DONT FORGET TO PRESERVE THE PERMISSIONS

thor2002ro said:
good luck
PS: DONT FORGET TO PRESERVE THE PERMISSIONS
Click to expand...
Click to collapse
Thanks. Will try when I get home from work. I will remember permissions.

awsome
thank you so much no more wifi error but now it just says wifi turning on but never does!! can you post a link for the whole backup you made!!

Anyone have the module for 2.6.36.3-00001-gf991e5d?
I got that going now. I have Acer_A500_1.112.04_COM_GEN1 and can't update to Acer_A500_1.139.04_COM_GEN1.

added original kernel modules section here
http://forum.xda-developers.com/showthread.php?t=1058713

[Q] Can't install hltexx CM rom on hltexx SM-N9005 device.

Hello guys, I have a Samsung Galaxy Note 3 SM-N9005 device on which I installed CyanogenMOD from a tutorial I found on the Internet, but everytime I was going through my Setting > About I could see that it showed my device as an N9000 device. So now I was thinking to do a reinstall with the correct hltexx version but when I'm trying to install the cm-11-20140123-NIGHTLY-hltexx.zip It shows me an ERROR: 'This package is for "hltexx" devices; this is a "hlte".
What can I do to fix my phone? I have already formated everything and I'm just waiting for a solution. I searched already on google but I couldn't find anything.
Thank you in advance, I will try to reply instantly check back if you replied. I hope I didn't broke my device.
Sorry for my English.

nexussp said:
Hello guys, I have a Samsung Galaxy Note 3 SM-N9005 device on which I installed CyanogenMOD from a tutorial I found on the Internet, but everytime I was going through my Setting > About I could see that it showed my device as an N9000 device. So now I was thinking to do a reinstall with the correct hltexx version but when I'm trying to install the cm-11-20140123-NIGHTLY-hltexx.zip It shows me an ERROR: 'This package is for "hltexx" devices; this is a "hlte".
What can I do to fix my phone? I have already formated everything and I'm just waiting for a solution. I searched already on google but I couldn't find anything.
Thank you in advance, I will try to reply instantly check back if you replied. I hope I didn't broke my device.
Sorry for my English.
Click to expand...
Click to collapse
You need to edit your updater script.
OR
You can try one of the custom CM's we have HERE on XDA, that have all the CM features plus some extra's baked in

nexussp said:
Hello guys, I have a Samsung Galaxy Note 3 SM-N9005 device on which I installed CyanogenMOD from a tutorial I found on the Internet, but everytime I was going through my Setting > About I could see that it showed my device as an N9000 device. So now I was thinking to do a reinstall with the correct hltexx version but when I'm trying to install the cm-11-20140123-NIGHTLY-hltexx.zip It shows me an ERROR: 'This package is for "hltexx" devices; this is a "hlte".
What can I do to fix my phone? I have already formated everything and I'm just waiting for a solution. I searched already on google but I couldn't find anything.
Thank you in advance, I will try to reply instantly check back if you replied. I hope I didn't broke my device.
Sorry for my English.
Click to expand...
Click to collapse
common problem !
extract the updater-script from the cm archive. folder = \META-INF\com\google\android
open in texteditor, remove the first line and save the file. (first line is the device check.)
repack the file to the archive.
flash and enjoy !

radicalisto said:
You need to edit your updater script.
OR
You can try one of the custom CM's we have HERE on XDA, that have all the CM features plus some extra's baked in
Click to expand...
Click to collapse
Thank you! Wow, so many of them which should I try. For start I will try to edit my updater script and if it doesn't work I will try something from that huge list you gave me! Thank you again!
Thank you A.N.Droid. I can't find the updater-script in META-INF>com>google>android. The only thing I can find there is the: metadata and otacert file, maybe it's because I'm using Linux and I don't have the right Archive Manager.
Should I delete the third line in metadata?
post-build=samsung/hltetmo/hltetmo:4.3/JSS15J/N900TUVUBMI7:user/release-keys
post-timestamp=1390477424
pre-device=hltexx
Click to expand...
Click to collapse

nexussp said:
Thank you! Wow, so many of them which should I try. For start I will try to edit my updater script and if it doesn't work I will try something from that huge list you gave me! Thank you again!
Thank you A.N.Droid. I can't find the updater-script in META-INF>com>google>android. The only thing I can find there is the: metadata and otacert file, maybe it's because I'm using Linux and I don't have the right Archive Manager.
Should I delete the third line in metadata?
Click to expand...
Click to collapse
Remove the two xx

radicalisto said:
Remove the two xx
Click to expand...
Click to collapse
does this work too ? just wonderig...
@nexussp
you looked at the wrong folder(\META-INF\com\android). updater script is located at \META-INF\com\google\android

A.N.Droid said:
does this work too ? just wonderig...
@nexussp
you looked at the wrong folder(\META-INF\com\android). updater script is located at \META-INF\com\google\android
Click to expand...
Click to collapse
I just realized that. THANK YOU EVERYONE, my phone is fine and is working like a charm.
And removing the two xx from hltexx in metadata doesn't work.

Keyboard

Hi
How to enable secondary symbols on stock samsung keyboard?

Mikael1711 said:
Hi
How to enable secondary symbols on stock samsung keyboard?
Click to expand...
Click to collapse
Google "enable symbols on keyboard samsung" then click on the first link that search returns. That's how I did mine.

Thank you for your reply.... unfortunately, it´s a tad too complicated for me.....

Here we go
Mikael1711 said:
Thank you for your reply.... unfortunately, it´s a tad too complicated for me.....
Click to expand...
Click to collapse
Well there is another way to do this only if you have rooted device and xposed wanam module installed.
just open wanam>system and Enable keypard symbols.
!!! ALWAYS MAKE BACKUPS OF THE FILES YOU EDIT! I am not responsable for the things you do! Do this on your own risk! !!!
You need to edit your feature file. (/system/csc/others.xml or /system/csc/feature.xml)
Between the lines <FeatureSet> and </FeatureSet> you have to insert
<CscFeature_Sip_EnableSymbolInSecondary>en_GB;de;de_DE;fr_FR</CscFeature_Sip_EnableSymbolInSecondary>
Click to expand...
Click to collapse
If you dont have wanam module installed then use es file explorer and backup your feature.xml and other.xml files (just in case you need your original files back) and then replace feature.xml file with one i have provided in attachment.
Hope this helps.

hi_blues said:
Well there is another way to do this only if you have rooted device and xposed wanam module installed.
just open wanam>system and Enable keypard symbols.
Click to expand...
Click to collapse
That XML file contains sales codes and region codes. If codes don't match it may make a difference. I don't know for sure though. I used xposed modules on the Note II and Note 3 but not on the Note 4. I have seen where some people were having problems with it but I don't know what all modules they were using.

CodeNameRedNeck said:
That XML file contains sales codes and region codes. If codes don't match it may make a difference. I don't know for sure though. I used xposed modules on the Note II and Note 3 but not on the Note 4. I have seen where some people were having problems with it but I don't know what all modules they were using.
Click to expand...
Click to collapse
Well, On Note 4 your have to freeze Shelth and health services. Without freezing these 2 services you might end up in boot loop (which i did twice). Once xposed and wanam are set you can unfreeze them (well i dont even need them).
sales code and region code hmmmm there was nothing much in the file lol anyone can have it.
BUT i will recommend making backup and then editing the original files one your Note. Use attached files as guideline where to put thing and stuff.

hi_blues said:
Well, On Note 4 your have to freeze Shelth and health services. Without freezing these 2 services you might end up in boot loop (which i did twice). Once xposed and wanam are set you can unfreeze them (well i dont
Click to expand...
Click to collapse
It is just the three digit CSC code but phones from different regions have different codes. Like I said I don't even know if it makes a difference.

I would like to use xposed an Wanam.... but as I understand, it will make my new phone lag

Lenovo K4 note volte in s219 build

Hey everyone. After rooting s219, by changing some lines in build prop we can see volte feature in network settings.
But no volte symbol in status bar
Paste these lines in build prop. I can't see volte symbol may be due Vodafone. Those who has jio please let me know if it works in s219 with root.
ro.mtk_volte_support=1
persist.mtk.volte.enable=1
persist.dbg.volte_avail_ovr=1
Thanks

No it's not working with jio

sharan565 said:
No it's not working with jio
Click to expand...
Click to collapse
So by adding these line you don't have volte enable option in network setting. ? or it just changes from 4g to H+ when calling?
I have attached 3 more files which are extracted from s208 ota, add them in system/bin/ and give permissions like rwxr-xr-x with ex file explorer. these files were missing in s219 update. i am not sure about the permissions. sad part is that i am not getting jio sim for testing. that's why i need your helps.
Pls let me know the result.

iamironman91 said:
So by adding these line you don't have volte enable option in network setting. ? or it just changes from 4g to H+ when calling?
I have attached 3 more files which are extracted from s208 ota, add them in system/bin/ and give permissions like rwxr-xr-x with ex file explorer. these files were missing in s219 update. i am not sure about the permissions. sad part is that i am not getting jio sim for testing. that's why i need your helps.
Pls let me know the result.
Click to expand...
Click to collapse
With default dailer calls are not going. Calls ends automatically.

sharan565 said:
With default dailer calls are not going. Calls ends automatically.
Click to expand...
Click to collapse
Oh, not had this problem, probably add those files and see if you can make calls and restart phone. because i thought only editing build prop will enable volte. seems those files also needed.
I added them along with changing build prop lines. and i was able to make call too.

iamironman91 said:
Oh, not had this problem, probably add those files and see if you can make calls and restart phone. because i thought only editing build prop will enable volte. seems those files also needed.
I added them along with changing build prop lines. and i was able to make call too.
Click to expand...
Click to collapse
Can you show permissions Screenshot
And you are making volte calls with Vodafone?

No, Vodafone doesn't support volte at the moment in India seems. I called customer care. Don't know that guy knows about volte or not.. So I am not sure whether it's working or not. I can make Normal calls.

U were asking this seems

iamironman91 said:
U were asking this seems
Click to expand...
Click to collapse
Still no luck

sharan565 said:
Still no luck
Click to expand...
Click to collapse
ok. i just tried with my friend sim card. i am also not able to make call. seems there is something else missing.

iamironman91 said:
ok. i just tried with my friend sim card. i am also not able to make call. seems there is something else missing.
Click to expand...
Click to collapse
I don't think it's not that easy task to get volte. But you tried.

sharan565 said:
I don't think it's not that easy task to get volte. But you tried.
Click to expand...
Click to collapse
yes someone can help us. Also i think there should be some UI to show on status bar. :good:

sharan565 said:
Still no luck
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=_GeeLrVPm2s
can you try this apn settings once?

Volte feature in k4 note does not have to do anything in system partition. Its relevent files and settings are somewhere in data or some other partition.
I am saying this because I am using s208 build which supports volte but if I wipe data and internal storage, volte stops working. So, it has to do something with partition other than system.

plzzz sr @Zormax

iamironman91 said:
Hey everyone. After rooting s219, by changing some lines in build prop we can see volte feature in network settings.
But no volte symbol in status bar
Paste these lines in build prop. I can't see volte symbol may be due Vodafone. Those who has jio please let me know if it works in s219 with root.
ro.mtk_volte_support=1
persist.mtk.volte.enable=1
persist.dbg.volte_avail_ovr=1
Thanks
Click to expand...
Click to collapse
After rooting Row S219? Is there a root for S219 i tried the guides in rooting my s219 k4 note I end up with bootloop.

Follow this link. One of best guide. Easily understandable. Let me know if it helps. First flash s219 build properly with sp tools before beginning the rooting procedure.

(Help) Enable Call Recording & Recent Used App Lock 7.0

I would like to Enable Call Recording & Recent Used App Lock to my phone.
I am fully rooted with Magisk 14, and Xposed v88. I have the Galaxy S7 Edge SM-G935W8 RWC Canada (Rogers) - G935W8VLU2BQH1
I'm not asking how to edit my build.prop, I'm asking what writing do I add to it?
Please view the attached pictures before commenting so we're on the same page.
Thanks, all info is appreciated!

JeffG79 said:
I would like to Enable Call Recording & Recent Used App Lock to my phone.
I am fully rooted with Magisk 14, and Xposed v88. I have the Galaxy S7 Edge SM-G935W8 RWC Canada (Rogers) - G935W8VLU2BQH1
I'm not asking how to edit my build.prop, I'm asking what writing do I add to it?
Please view the attached pictures before commenting so we're on the same page.
Thanks, all info is appreciated!
Click to expand...
Click to collapse
You need a custom System UI and CSC Feature Expert by Wanam. Also, implementing these features does not relate to editing your build.prop as it's got to do with CSC file editing rather than latter.

For call recording
Just add the following line (anywhere, but BETWEEN <FeatureSet> and </FeatureSet> lines):
<CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
The other I dont know. Maybe this one?
<CscFeature_SystemUI_SupportRecentAppProtection>TRUE</CscFeature_SystemUI_SupportRecentAppProtection>
I've attached others.xml file from Superman ROM. Credits to @Tkkg1994 . The features you are looking for should be in there. Do NOT replace your own others.xml file with this. This is for BTU.

Eggleston11 said:
For call recording
Just add the following line (anywhere, but BETWEEN <FeatureSet> and </FeatureSet> lines):
<CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
The other I dont know. Maybe this one?
<CscFeature_SystemUI_SupportRecentAppProtection>TRUE</CscFeature_SystemUI_SupportRecentAppProtection>
I've attached others.xml file from Superman ROM. Credits to @Tkkg1994 . The features you are looking for should be in there. Do NOT replace your own others.xml file with this. This is for BTU.
Click to expand...
Click to collapse
Awesome man! Thanks for the info I'll give it a try and report back

Got them
Native call recording: <CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
RecentAppProtection: <CscFeature_SystemUI_SupportRecentAppProtection>TRUE</CscFeature_SystemUI_SupportRecentAppProtection>

Hi all, is there any way to modify the folder call recordings are written to? I'd like to place them on the ExtSd card.

JeffG79 said:
Got them
Native call recording: <CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
RecentAppProtection: <CscFeature_SystemUI_SupportRecentAppProtection>TRUE</CscFeature_SystemUI_SupportRecentAppProtection>
Click to expand...
Click to collapse
Hey, pal.
Would you mind telling which file you had to edit to get it working??
Thanks in advance.
---------- Post added at 09:33 AM ---------- Previous post was at 09:11 AM ----------
danilo.godo said:
Hey, pal.
Would you mind telling which file you had to edit to get it working??
Thanks in advance.
Click to expand...
Click to collapse
Just found it inside System\CSC folder.
Awesome!!!!!!!!