Hello everyone !
I need help with my phone ... When uploading a new rom was successful. When you reset your phone does not display even logos. Lights up the LED is red and green. When you try to turn on the computer displays the unknown device without drivers. Is it possible to do something about it? I do not want to lose this phone.
Related
Hello everybody,
I have a problem with my Touch. A couple of days a go my phone was empty, when I tried to power it up again and start it, but then it hanged in the first screen (the T-mobile screen for my phone). I read a lot on this forum, but I'm a newbie so it's hard for me to find the good solution. I could get the phone in the bootloader ( triple color screen), but it doesn't give the RUU letters in the right corner. If I connect the phone threw usb to my computer, it doesn't give me anything. Active sync doesn't go green. I tried the following things,
1. Go in the bootloader (this works!)
2. Disable the USB connection in active sync
3. Start an USB-sniffer (didn't find my phone)
4. Tried to use MTTY (gives me the error, can't open USB connection, something like this)
5. Tried to flash a rom while in bootloader screen, but the flashing utility can't connect to my phone.
So the main problem is that the phone can't connect to the computer, what do I have to do, to put a new rom on my phone, so I can start the damn thing again??? Please help
Thanks
have you tried hard reset ?
still nothing
I also tried hard reset, still hangs in the first screen, there's also a new problem. I can't put it one, and when I put in the adapter (to charge) it give a red light (constant), what to do, what to do?
no tips?
nobody has any solutions?
Stuck at Fastboot & Rescue Mode, tried multiple things; Always 100% Original Software
Hi reader,
First some background:
A month ago I changed my SIM Card in my 2.5 year old Huawei P9 Lite with original Android 7.0. I never flashed or rooted this phone. Developer options are on (not sure though). Since then, I saw a major battery drain. After charging fully, it drained fast to 51% and got stuck on 51%. The phone turned off. After trying to turn it on, the red LED flashes. Charging it for 2 days, the green led turns up. However, turning the phone one, the screen stays black and red light flashes. Charging for 5-10 minutes, the green light turns on but this loop of green and red lights continues.
What I want:
Get my contacts and notes back
What I tried:
- Volume down + power and connecting to pc -> Fastboot. Message:
* Please connect usb cable to your computer and open HiSuite -> done, but HiSuite does not recognize phone. Windows does, as Android Sooner Single ADB Interface. The cmd code: ''fastboot'' does not give the wanted result (not found). As windows does not recognize the correct phone, I tried to install a new Huawei USB driver. The problem is, that Windows says the Android Sooner driver is already the best driver available.
* Android reboot reason: AP_S_COLDBOOT NA. Volumekey_down_press_process_func
* Green android puppet
* PHONE Locked. FRP Lock. -> I tried to unlock via Universal Fastboot & ADB Tool. This program recognices device as ''FUH4C16518004949 fastboot'' and reboot button in the program phone works (but again the red light). I also tried to unlock bootloader but I cannot find the correct key via the Huawei website (thus could not try oem relock *Here Huawei Code*). I tried to flash EliteTWRP-3.2.1-0_2018-01-19.img, but that is not possible due to the lock.
What can I do next in order to get a backup of my contacts and notes?
Phone will go on charger again.
No one?
So you said you didn't do any root and/or unlocks? This seems like a battery/motherboard failure. To fix it, go to HUAWEI's official service center
The Restless Soul said:
So you said you didn't do any root and/or unlocks? This seems like a battery/motherboard failure. To fix it, go to HUAWEI's official service center
Click to expand...
Click to collapse
Thank you for your answer. That is correct, no root and no unlocks.
Huawei Service Centres are not nearby and warranty is over. That is the reason I wanted to try a few things.
Are there things I could still try?
richh008 said:
Thank you for your answer. That is correct, no root and no unlocks.
Huawei Service Centres are not nearby and warranty is over. That is the reason I wanted to try a few things.
Are there things I could still try?
Click to expand...
Click to collapse
Get the spare parts and fix it by yourself? The battery replacement is very hard and you can damage the display cords. So i recomment a third party service then.
Hi,
I tried to update my phone by following this tut
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
I got some "Preloader set true" message so i changed it to false in scater file.
Now i got "Dram failed 4032" message.
PC doesnt see my phone at all and it wont even show me boot logo. (battery non removable)
Only battery indicator is red, so i know it's kinda turned on.
first sorry my english
I tried to restore my TA partition my bootloader again and simply my xperia Z3 plus/Z3 + dual - E6533
It does not turn on anymore, it does not vibrate, when I connect it in the charging it blinks red light, when it is on the computer it blinks a red light too and there is no driver
only red light all the time
Any solution ?
:crying::crying::crying:
Any solution ?[/QUOTE said:
try to reflash stock rom with flashtool
0.-google the ftf file for your device or use flashtool>xperifirmware built in to download it
1.- turn off your phone (or keep it off in your case)
2.-install xperia companion to have the latest drivers and reboot your pc
3.-run flashtool by androxide ver 0.9.25
4.- flash stock rom via flashmode, follow the steps
and done.
Click to expand...
Click to collapse
d_g_m_2000 said:
try to reflash stock rom with flashtool
0.-google the ftf file for your device or use flashtool>xperifirmware built in to download it
1.- turn off your phone (or keep it off in your case)
2.-install xperia companion to have the latest drivers and reboot your pc
3.-run flashtool by androxide ver 0.9.25
4.- flash stock rom via flashmode, follow the steps
and done.
Click to expand...
Click to collapse
impossible ... the computer does not recognize the cell phone
When I put USB driver does not appear
and the cell phone only flashes a red light
I can not get into flashmode and fastboot anymore
no blue light and no green light only flashing red light
This looks like sudden death. =/
I'm so sad
:crying::crying::crying:
deidshin said:
impossible ... the computer does not recognize the cell phone
When I put USB driver does not appear
and the cell phone only flashes a red light
I can not get into flashmode and fastboot anymore
no blue light and no green light only flashing red light
This looks like sudden death. =/
I'm so sad
:crying::crying::crying:
Click to expand...
Click to collapse
well, you can see this like an oportunity to (with a little effort) buy some android one device to get years of google's support. right now there's a lots of devices within the android one program and for any type of budget.
deidshin said:
first sorry my english
I tried to restore my TA partition my bootloader again and simply my xperia Z3 plus/Z3 + dual - E6533
It does not turn on anymore, it does not vibrate, when I connect it in the charging it blinks red light, when it is on the computer it blinks a red light too and there is no driver
only red light all the time
Any solution ?
:crying::crying::crying:
Click to expand...
Click to collapse
I've got almost the same symptoms with the same phone.
It didn't boot while disconnected from a charger.
Being connected to the charger, it tried to boot and almost immediately failed. It also blinked 3 times with red on every my attempt to turn it on.
I've remembered about battery and background surface replacement, that had happened before.
Verifying the background surface i found out, that it's not sealed tightly to the phone body. Inspecing internals i've disconnected and tightly connected the battery.
Also, i've firmly installed the background phone body surface and heated it for better coupling.
As a result, i was able to charge and boot the phone after this procedure.
P.S.
From my point of view, you need to disassemble the background phone body surface and re-connect the battery wire to the phone internal socket.
Hi!
Finally I maded it... I totally brick my device during an update :/
Now black screen, only power led blink every minute more or less.
I try everything, nothing work! always black screen and pc dont recognized the tab.
Im trying to put the tab in EDL mode, but I cant find the correct pin to bridge... some idea?
I send a cap of the tab mainboard
Thanks!