Please help - ZTE Axon 7 Questions & Answers

I unlocked my bootloader and rooted all went well. I flashed Z.A.D Rom and all was good. i decided to give CM 13 a try so I made a backup in TWRP (checked all boxes to back up everything) flashed CM13 played around with it for a bit didnt like it so I went back to TWRP wiped everything and restored my back up. When the phone booted back up got message NO SIM and my wifi wouldn't work. So I thought maybe a bad flash I'll try to restore my back up again. Same results no sim and no wifi. So I Tried to flash CM 13 again because that was the last thing that worked. That now freezes at boot then power downs the phone (tried everything to get it to boot). So I then tried to Flash the Boot stack again and stock rom. That will boot but again no sim and no wifi. I'm at a loss right now and dont know what else to try. Can someone please help me.

killathenoob said:
I unlocked my bootloader and rooted all went well. I flashed Z.A.D Rom and all was good. i decided to give CM 13 a try so I made a backup in TWRP (checked all boxes to back up everything) flashed CM13 played around with it for a bit didnt like it so I went back to TWRP wiped everything and restored my back up. When the phone booted back up got message NO SIM and my wifi wouldn't work. So I thought maybe a bad flash I'll try to restore my back up again. Same results no sim and no wifi. So I Tried to flash CM 13 again because that was the last thing that worked. That now freezes at boot then power downs the phone (tried everything to get it to boot). So I then tried to Flash the Boot stack again and stock rom. That will boot but again no sim and no wifi. I'm at a loss right now and dont know what else to try. Can someone please help me.
Click to expand...
Click to collapse
To answer your own question, a simple search in the Q&A section will help you.
You might want to grab version B20 and roll back, on the bottom left of the page select "Software Updates"
https://www.zteusa.com/axon-7#support
Then follow this thread to use the proper commands:
http://forum.xda-developers.com/axon-7/how-to/please-check-wifi-flashing-bootloops-t3451544

killer23d said:
To answer your own question, a simple search in the Q&A section will help you.
You might want to grab version B20 and roll back, on the bottom left of the page select "Software Updates"
https://www.zteusa.com/axon-7#support
Then follow this thread to use the proper commands:
http://forum.xda-developers.com/axon-7/how-to/please-check-wifi-flashing-bootloops-t3451544
Click to expand...
Click to collapse
I dont know how i didnt find that I searched every section of this fourm I was trying everything for about 5 hours last night. But thank you very much i will do this now.

Related

[Q] Vzw having SERIOUS issues flashing with no download mode!!!

ok, so i have the verizon lg g2, i have flashed numerous phones before and never had anything like this happen. First off, it took me hours to just get the thing rooted after going thru about 15 different walkthrus before one worked.
Then i decided i wanted Malladus ROM so i tried flashing twrp recovery with loki, didnt work, went thru damn near every forum about it coming out with nothing....until...found one talking about flashify and everyone said it worked fine. So i do it, took about 1 second and said it worked, restarted and nothing had changed, except now i cannot enter download mode! When i do it just shows "firmware update" it never changes, left it on all night still at 0%.
I have unrooted it (even though it still says its rooted, but no longer have permissions) and i did a full reset, NOTHING works!!
So before you guys chime in, let me tell you what i have tried....EVERYTHING lol .....I know the only way to fix my phone to fully unroot it is to flash back to original rom, so i went to http://forum.xda-developers.com/showthread.php?t=2448960 and that wont work because 1. cant get into dl mode, and 2 it wont let me open the flash tool (did everything right, researched and came up with nothing)
then i went to http://forum.xda-developers.com/showthread.php?t=2432476 cant get that to work either because cant get into dl mode, so now i have TWO 2.2gb rom files on my comp that i cant use,
And just to be clear, I KNOW HOW to go to dl mode lol, i have wrote it several forums and all people keep saying is the stuff ive already said.
Oh and i cant push with adb either...that is how i originally tried twrp and after 3 hours of trying to figure it out i finally got it to go thru (it was wrong i think but it worked) and that may be what has caused it to crash the dl screen.
Ive never used adb before and after reading 7 diff forums beginning to end (bout a 1000 pages) i realized they were all the same but do not actually explain enough for someone who has never one it. It said to push, well idk what that meant! lol I need step by step instructions in order to fix this, even the tiniest of things may be something i would miss.
PLEASE HELP ME!!!! Thanks guys!
Download mode should work... The first night I got my G2 it was about 4 in the morning, and I immediately installed TWRP on it (3.2 is what you want 3.3 doesn't work), and promptly erased everything on my phone... Partition, data, and everything.
But download mode was still intact, and that first thread you linked worked just fine for me. If you're having issues with that flash tool and being stuck at a login screen, you missed the part where it tells you to download a DLL file and place it the flash tool install directory. That file will bypass the system login and let you use the program.
I don't know how long you've been up, but I'd say take a break and come back to it in a bit. If you still can't download mode to work, have a friend come over and look up how to get in download mode, then have them try it. I've done that many times... Thought I was doing everything right and a second pair of fresh eyes found some tiny thing I overlooked in the process.
I hope you get your phone working man, sorry I can't be of more specific help.
Sent from CAMACHO, my Verizon G2 (VS980) running PAC ROM.

[Q] Phone has no recovery and other issues.

First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie

Stuck on Recovery Boot Loop after Rooting

Hello there,
I am having a little bit of an issue with a new Galaxy Note 4 that i got for my wife. We both bought our devices yesterday, mine from Three, and hers from EE (we are in the UK), both SM-N910F, so i proceeded to root my device and it worked all great. So earlier today i started the exact same procedure, unfortunately, my wifes Note 4 got stuck in a Recovery Boot Loop, and i genuinely don't understand what is happening.
As for the rooting method, i went with the [SM-N910*] CF-Auto-Root and choose the right .tar file, or else it wouldn't of had worked on the first device.
I have read quite a few posts, saw a few videos on youtube, but it far beyond me. I have seen a few people mention that i need to download the German (?) version of the Stock firmware, and then flash it. I seem to have found a link for it on SamMobile but it's gonna take 5 hours to finish, and i don't understand why i would download the German Stock firmware, is that the correct one for her device ?
At this point, is there any way around it ? Why did my device which is the same work perfectly, but not hers ?
I would appreciate any and all help, if you could make it quite detailed for me i would appreciate it even more.
Thank you!
Hi @Vaskie!
Can you enter in download mode?
Hello there @_mone, the following has happened since i posted:
Went ahead and flashed the following: N910FXXU1BOB4_N910FOXA1BOB4_N910FXXU1BOB4_HOME.tar and it made the device reach the home screen, from there i attempted to root using the same method which worked, but it ended installing a few extra applications, which i don't understand how. I also don't understand how flashing a new stock rom didn't make me start the device from the beginning, it already had all my information and went straight to the home screen ready to use. I feel quite confused if im honest.
On the other hand, most things seem to be working perfect, but i am having some issues with the front camera. I have two Note 4s, both bought yesterday from the same place, but one was flashed with the Stock rom (N910FXXU1BOB4_N910FOXA1BOB4_N910FXXU1BOB4_HOME.ta r) due to being stuck in a boot loop. The front camera seems to be massively over exposed compared to the other Note 4, not just a little bit either, making it almost unusable.
Would anyone be able to help ?
Vaskie said:
I also don't understand how flashing a new stock rom didn't make me start the device from the beginning, it already had all my information and went straight to the home screen ready to use. I feel quite confused if im honest.
Click to expand...
Click to collapse
That's because you "dirty" flashed a new ROM on top of the old one.. it was like an "update".
What I suggest you (because you already rooted your phone and your knox is 0x1) is to flash TeamWin Recovery Project from ODIN and then flash a TW ROM from the Galaxy Note 4 Android Development (Snapdragon) page
To do so download "twrp-2.8.7.0-trltexx.img.tar" from here, put your phone in download mode, connect it to the pc via usb, from the pc launch odin, let it recognize your phone, add the downloaded .img.tar file on the pda button, click on the "start" button and let it flash the recovery.
Now download a TW ROM like _alexndr's DevBase from here and this modem and this bootloader.
Then put the downloaded ROM (N910FXXU1POF2_DevBase_alexndr.zip) in your external SDcard. Reboot your phone in recovery mode. From TWRP go Wipe/AdwancedWipe/ and tick DalickCache, System, Data, Internal Storage, Cache and "Swipe to Wipe". After go back to the first page, hit "Install" search "N910FXXU1POF2_DevBase_alexndr.zip" in "/external_sd" and install it. Wipe Dalvick and Cache again and reboot into download mode. Again connect your phone to the PC and launch ODIN now put the downloaded modem "CP_N910FXXU1POF1.tar.md5" in the CP button and the bootloader "BL_N910FXXU1POF2.tar.md5" in the BL button and click on the "start".
Once it is done switch off and on your phone and start again with the latest samsung rom for N910F already with root, busy box and all the fixes by _alexndr
And let us know if you still have problems.
Thank you very, very much for the very well detailed reply @_mone
I will attempt to go ahead with your explanation tomorrow. Would that somehow fix the camera, and i guess the other question is.. is the front camera issue that i explained myself above to do with me "dirty flashing" ?
Is there anything inherently wrong with "dirty flashing" ?
Thank you yet again!
Nothing wrong with dirty flashing.. but sometimes doing so you can create conflicts between old and new rom or leaving "bugs" from the old to the new generating problems in your new os that may wont be there if you performed a clean install. :good:

Not sure what I did, boot I am stuck in a boot loop

Started off by unlocking the bootloader on the December update (just got device the other day)
Used @munchy guide to install twrp and root the device
everything looked great
backed up stock
flashed everything but internal storage
installed lastest version of AOSiP
crashed during install so I thought ok, bad download. did a restore and got an error that system wasn't mounted. unchecked the box under mount, and restored. I reboot and all hell has broken loose. Fore close left and right. I go back to try and get to TWRP, and it's stock Recovery.
Follow guide again and get back into TWRP. I see that all my stuff is still there. So I do some reading and saw some folks having similar problems with TWRP not sticking, so I find some instructions in the TWRP thread that I need to flash the TWRP image to both slots, run the install patcher and should be all set. I do that...wipe again, restore and now I am in a continuous bootloop. I tried to switch slots, do a restore on the other slot....bootloop.
I feel really stupid and really bummed out that even with all my years and experience, I somehow found myself in this noob trap. Is anyone able to help me at least get back to just stock? All I really want at this point is to be back on stock with root so I can run an ad blocker. Thanks everyone
Mods - could you please close? I know have a hardware issue (lol), a rubber ring on the inside of USB port has come out and wedged inside the port, rendering the device defective. Thank you

How I fixed my Realme x2 Pro from not booting into system

So earlier I spent hours trying to fix this with no luck. I downloaded probably over 12 different roms, same thing. I've posted on the questions forum for help and we still couldn't figure it out.
It would go right back to recovery, so I was curious and flashed AOSIP custom rom and it booted right up!
From there I downloaded the stock recovery.img, flashed that. went to wipe, tried wiping regular, didnt work. So I clicked format data, it finished then installed the stock rom and everything is working.
This may not work for everyone, nor am I saying its a guaranteed fix, it's something that worked for me.
Let me know if this works for you if you want the stock recovery img, I can upload it too!
Huge shoutout to @Sergiocubano1 who spent hours trying to help me fix the issue. Happy flashing everyone, also if you go back to a custom recovery orangefox/twrp I would suggest creating a backup of your rom and putting the backup on your computer.
I wonder why it is not possible to restore this phone by putting it in EDL DOWNLOAD mode.
I would like to return stock with the RMX1931EX_11_A.08, because now with this system I suffer from random restarts but I am stopped for fear of brick.
On youtube there are guides for unbrick, but there are passwords to the software for flashing in EDL DOWNLOAD that they release for a fee of $ 20.
I honestly didn't believe this phone was so limited on a mod level.
Such a pity.
westenlive said:
I wonder why it is not possible to restore this phone by putting it in EDL DOWNLOAD mode.
I would like to return stock with the RMX1931EX_11_A.08, because now with this system I suffer from random restarts but I am stopped for fear of brick.
On youtube there are guides for unbrick, but there are passwords to the software for flashing in EDL DOWNLOAD that they release for a fee of $ 20.
I honestly didn't believe this phone was so limited on a mod level.
Such a pity.
Click to expand...
Click to collapse
I wouldn't trust them. Did you try this method?
I don't trust them either. For this reason I have not tried.
however other devices like oneplus have the possibility.
to perform a total reset of the device through this EDL DOWNLOAD method.
in this device it is all very strange.
this device has very interesting specifications but is very limited.
I am looking for a system to do a total reset of the device with a stock version.
xHvlios said:
So earlier I spent hours trying to fix this with no luck. I downloaded probably over 12 different roms, same thing. I've posted on the questions forum for help and we still couldn't figure it out.
It would go right back to recovery, so I was curious and flashed AOSIP custom rom and it booted right up!
From there I downloaded the stock recovery.img, flashed that. went to wipe, tried wiping regular, didnt work. So I clicked format data, it finished then installed the stock rom and everything is working.
This may not work for everyone, nor am I saying its a guaranteed fix, it's something that worked for me.
Let me know if this works for you if you want the stock recovery img, I can upload it too!
Huge shoutout to @Sergiocubano1 who spent hours trying to help me fix the issue. Happy flashing everyone, also if you go back to a custom recovery orangefox/twrp I would suggest creating a backup of your rom and putting the backup on your computer.
Click to expand...
Click to collapse
can you give me the link of the recovery stock?
thank you very much
@xHvlios Please how did you get the stock rom ozip into the stock recovery? I tried putting it in the device storage but when I go into stock recovery -> choose language -> install from storage device -> From phone storage; nothing happens. I also tried putting it in a flash drive but I can't see this device in the recovery.

Categories

Resources