In every thread someone would mention that I need to boot to Stock Recovery (for example, to install update manually) but no one ever mention how to do it. When I press volume up + power it just boots to TWRP so I figured it would be volume down + power but it juts boots to some image "Factory Test Mode" where whatever I do, nothing happens . Please, could just someone enlighten me how to boot to Stock Recovery? Thanks.
install recovery image from twrp. you can find it on dev section on forum.
AFAIK You can't boot to stock recovery if you flashed twrp. Flash the stock recovery and then you should be able to reboot to stock recovery
PsyJoe said:
AFAIK You can't boot to stock recovery if you flashed twrp. Flash the stock recovery and then you should be able to reboot to stock recovery
Click to expand...
Click to collapse
WesTD said:
install recovery image from twrp. you can find it on dev section on forum.
Click to expand...
Click to collapse
I have recovery.img file but I have no idea what option to choose in TWRP to install it. When I check "Install" I can't see this recovery.img file that I put on my sd card/internal storage
ourplaceinthestars said:
I have recovery.img file but I have no idea what option to choose in TWRP to install it. When I check "Install" I can't see this recovery.img file that I put on my sd card/internal storage
Click to expand...
Click to collapse
Click "install image" option bottom right.
WesTD said:
Click "install image" option bottom right.
Click to expand...
Click to collapse
OMG, I am retarded, how did I not see that...
Just to be sure, when it says to select "partition to flash image" what should I choose? Boot, Recovery or System Image? I guess Recovery but I don't trust myself anymore...
ourplaceinthestars said:
OMG, I am retarded, how did I not see that...
Just to be sure, when it says to select "partition to flash image" what should I choose? Boot, Recovery or System Image? I guess Recovery but I don't trust myself anymore...
Click to expand...
Click to collapse
you will flash recovery.img. so you have to choose recovery
WesTD said:
you will flash recovery.img. so you have to choose recovery
Click to expand...
Click to collapse
I did that, but after this it reboots me to TWRP all the time. I can't launch my phone in normal mode, always goes to TWRP and it now asks for some Decrypt Data password... I have no idea what password that is. What's going on?
ourplaceinthestars said:
I did that, but after this it reboots me to TWRP all the time. I can't launch my phone in normal mode, always goes to TWRP and it now asks for some Decrypt Data password... I have no idea what password that is. What's going on?
Click to expand...
Click to collapse
d'd you formatted data after flashed twrp?
Related
Hi,
I unlocked my bootloader today and I just flashed the latest CWM Recovery via Fastboot.
However, when I try to enter Android Recovery I get the Android with the white triangle and exclamation point.
I saw a similar thread but did not see a resolution. Do I need to flash the Gingerbread boot.img via Fastboot?
Also, I read you have to delete a file somewhere or else the default recovery restores itself every reboot? I did not delete any such file, and when I unlocked my bootloader, it obviously wiped my data.
Any ideas how I can get into recovery and flash me a dang ROM?
Atrix_E said:
Hi,
I unlocked my bootloader today and I just flashed the latest CWM Recovery via Fastboot.
However, when I try to enter Android Recovery I get the Android with the white triangle and exclamation point.
I saw a similar thread but did not see a resolution. Do I need to flash the Gingerbread boot.img via Fastboot?
Also, I read you have to delete a file somewhere or else the default recovery restores itself every reboot? I did not delete any such file, and when I unlocked my bootloader, it obviously wiped my data.
Any ideas how I can get into recovery and flash me a dang ROM?
Click to expand...
Click to collapse
What command did you enter in Fastboot?
IUH1991 said:
What command did you enter in Fastboot?
Click to expand...
Click to collapse
I followed these steps:
Flashing CWM Recovery via Fastboot -
1.Download the latest CWM recovery from Downloads section (recovery-clockwork-5.0.2.0-olympus.img)
2.Power off phone
3.Put phone into fastboot (Power + Vol Down Button)
4.Press Volume Up button to select Fastboot
5.Connect phone via USB cable
6.Open Command Prompt from your fastboot directory
7.Type fastboot flash recovery recovery-clockwork-5.0.2.0-olympus.img
8.Type "fastboot reboot"
9.Your phone will reboot normally
Also, how screwed would I be if I don't backup my PDS? http://forum.xda-developers.com/showthread.php?t=1138220
I got it. Loving CM7
Could you share how did you make it work?
Thanks
iceinspire said:
Could you share how did you make it work?
Thanks
Click to expand...
Click to collapse
install recovery.sh is the file to delete i beleve its in /system/ect after useing like rommanager to install recovery i used romracers and flashed in recovery mode
i like that on better do a youtube search there are alot of good vids on how to do it
the ones i used were from thesmokingandroid
just type that into youtube search and he has a 3 part series on cwm and installing rom
Sent from my MB860 using xda premium
I deleted that file and its is still not work
iceinspire said:
I deleted that file and its is still not work
Click to expand...
Click to collapse
did you power off the phone
then
hold down power and volume down
when u see fastboot appear use vol
down to scroll to android recovery then
push power button to select it
NOTE; U need to be rooted and have your bootloader unlocked FIRST
Hi,
In order to update my phone to oxygenOS 2.2. I flashed oxygenOS 2.1.1 full rom and installed the OTA update for 2.2. Because of this the phone switched back to stock recovery. So I tried to install TWRP recovery through fastboot. The installation was successful but after reboot, it looks like the phone is keep switching back to stock recovery. I have tried this many times but same result everytime.
Note1: I did turned on the USB debugging before this.
Note2: Bootloader is unlocked.
Any help would be great. Thanks in advance!!
When TWRP asks you to modify system partition give it permission to do so at the start of booting to recovery
Akhil701 said:
When TWRP asks you to modify system partition give it permission to do so at the start of booting to recovery
Click to expand...
Click to collapse
The problem is that I dont see TWRP even once after flashing it. After flashing when I reboot to recovery, it directly shows me default recovery. When I said its switching back to stock recovery, because the flashing of twrp was successful, I am assuming that it is switching back to stock recovery.
Dreckk said:
The problem is that I dont see TWRP even once after flashing it. After flashing when I reboot to recovery, it directly shows me default recovery. When I said its switching back to stock recovery, because the flashing of twrp was successful, I am assuming that it is switching back to stock recovery.
Click to expand...
Click to collapse
I also experienced this the first time. But I just ran fastboot flash recover openrecover-twrp-2.8.7.0.img one more time and then rebooted the phone and pressed volume down until it entered TWRP.
pitrus- said:
I also experienced this the first time. But I just ran fastboot flash recover openrecover-twrp-2.8.7.0.img one more time and then rebooted the phone and pressed volume down until it entered TWRP.
Click to expand...
Click to collapse
Did that many times, but it keeps getting entering in the default recovery.
What happens when you boot twrp with fastboot instead of flashing?
Also probably shouldn't flash an ota 2 versions different than the full. If that was the full version you already had, should have flashed 2.1.2 ota then the 2.2.0 ota.
I'm having the same issue. I was able to boot into TWRP once from Fastboot, flashed SuperSU it said it was successful, then I rebooted. Root was not available, and stock recovery was back.
Chris_el said:
I'm having the same issue. I was able to boot into TWRP once from Fastboot, flashed SuperSU it said it was successful, then I rebooted. Root was not available, and stock recovery was back.
Click to expand...
Click to collapse
Don't know if will work... but boot to twrp from fastboot then flash twrp from within twrp.
khaos64 said:
Don't know if will work... but boot to twrp from fastboot then flash twrp from within twrp.
Click to expand...
Click to collapse
Hmm i'll give that a shot when I get home from work. Thanks.
Chris_el said:
Hmm i'll give that a shot when I get home from work. Thanks.
Click to expand...
Click to collapse
fastboot boot /path/to/twrp
then Swipe to allow modifications!
Yash98 said:
fastboot boot /path/to/twrp
then Swipe to allow modifications!
Click to expand...
Click to collapse
I get the error "FAILED remote: dtb not found'
I am using moto x style and unlocked bootloader with 'Windroid Universal Android Toolkit' v2.5 but cannot flash TWRP and root this apl. Today I tried flash TWRP and then root but after showing 'Congratulation' pop up,my phone stucked on 'No command' page. I tried twice and same result. Later i check there is either no TWRP or root by SuperSU. And i see youtube video and and read many XDA forum and comments and most of the users says the phone stuck on M logo page when reboot after the root process. And all says its a issue with Marshmallow. And most of the xda posts and youtube video are made during 5.1.1 so there is no problem in that video during flash TWRP and root. So i need a seamless process to flash TWRP and root on Marshmallow so that it doesnot stuck on M logo. And I dont want to downgrade to L for root. And unluckily if it stuck M logo thwn what to do to go back to home screen?Thank you.
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
Look in my sig...
It's in my signature... There are multiple links to what your looking for and other threads, if you are on computer they should be immediately below the message, if you're in the XDA app you have to look in the user profile (don't think it's possible in Tapatalk though).
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
acejavelin said:
It's in my signature... There are multiple links to what your looking for and other threads, if you are on computer they should be immediately below the message, if you're in the XDA app you have to look in the user profile (don't think it's possible in Tapatalk though).
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
Click to expand...
Click to collapse
My build no is 24.49-18-4. So is this process suitable for this build no? And still i dont flash TWRP. I tried with "Windroid Universal Android Toolkit app" to flash TWRP. though it showed a 'Successful' pop up but it didn't. Can I go with any old process to flash TWRP or u have a new process?
Atanu Mukherjee said:
My build no is 24.49-18-4. So is this process suitable for this build no? And still i dont flash TWRP. I tried with "Windroid Universal Android Toolkit app" to flash TWRP. though it showed a 'Successful' pop up but it didn't. Can I go with any old process to flash TWRP or u have a new process?
Click to expand...
Click to collapse
Step 1 - Stop using toolkits! They rarely work right on modern Android devices. With the Moto the only safe, reliable way to root is manually.
I don't know what the 'old way' is to flash TWRP your referring to here... I recommend one time booting twrp with "fastboot boot twrp.img" command (replace twrp.img with your actual twrp image file) then perform a backup to the SD card or USB OTG device and put it away for safe keeping. Then flash twrp either with twrp you have booted, or manually with "fastboot flash recovery twrp.img"
The rooting method I linked before is valid for all Marshmallow builds, if you have Lollipop or Nougat you need to find a different method.
acejavelin said:
Step 1 - Stop using toolkits! They rarely work right on modern Android devices. With the Moto the only safe, reliable way to root is manually.
I don't know what the 'old way' is to flash TWRP your referring to here... I recommend one time booting twrp with "fastboot boot twrp.img" command (replace twrp.img with your actual twrp image file) then perform a backup to the SD card or USB OTG device and put it away for safe keeping. Then flash twrp either with twrp you have booted, or manually with "fastboot flash recovery twrp.img"
The rooting method I linked before is valid for all Marshmallow builds, if you have Lollipop or Nougat you need to find a different method.
Click to expand...
Click to collapse
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I am saying about this official method which is on twrp.me site. And after typing 'fastboot reboot' what I have to do to go home page? Sorry to ask u so many things. Actually I am totally new in this thing and very much worry after facing issues 2-3 times. And thank u very much for fast reply.
One more ques, I have unlocked bootloader with that "Windroid Universal Android Toolkit". Now in fastboot it shows 'bootloader unlocked,code 3' is that ok? As u say toolkit doesnot work on modern devices.
Atanu Mukherjee said:
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I am saying about this official method which is on twrp.me site. And after typing 'fastboot reboot' what I have to do to go home page? Sorry to ask u so many things. Actually I am totally new in this thing and very much worry after facing issues 2-3 times. And thank u very much for fast reply.
One more ques, I have unlocked bootloader with that "Windroid Universal Android Toolkit". Now in fastboot it shows 'bootloader unlocked,code 3' is that ok? As u say toolkit doesnot work on modern devices.
Click to expand...
Click to collapse
So Moto is a tad different... After you flash recovery, do not reboot with fastboot, instead use the Vol Dn key select Recovery and press Power to start it. When the splash screen comes up, allow changes to system, then I the TWRP main menu select Reboot - Recovery, the device will start TWRP again and it should be "locked" in. From there perform the rooting.
acejavelin said:
So Moto is a tad different... After you flash recovery, do not reboot with fastboot, instead use the Vol Dn key select Recovery and press Power to start it. When the splash screen comes up, allow changes to system, then I the TWRP main menu select Reboot - Recovery, the device will start TWRP again and it should be "locked" in. From there perform the rooting.
Click to expand...
Click to collapse
That mean after typing fastboot flash recovery twrp.img press enter and then i can plug off the usb keeping my device on fastboot then changes to recovery and do the rest?
Btw suppose if i dont want to root it at that time,then what i do? I mean just after flash recovery how to go to home screen without rooting?
And when i want to perform root process later,after installing SuperSU zip if I press power button and vol down then may I go to twrp recovery or ph stock recovery?
Atanu Mukherjee said:
That mean after typing fastboot flash recovery twrp.img press enter and then i can plug off the usb keeping my device on fastboot then changes to recovery and do the rest?
Btw suppose if i dont want to root it at that time,then what i do? I mean just after flash recovery how to go to home screen without rooting?
And when i want to perform root process later,after installing SuperSU zip if I press power button and vol down then may I go to twrp recovery or ph stock recovery?
Click to expand...
Click to collapse
OK... I'm confused, why are you unlocking and installing twrp if your not going root or flash a custom ROM?
acejavelin said:
OK... I'm confused, why are you unlocking and installing twrp if your not going root or flash a custom ROM?
Click to expand...
Click to collapse
I will definately do so. I also want to use CM14.1 but i want to do so step by step. Actually after facing issues 2-3 times i am little bit worry now. That is true. So hesitate to perform both at a single time.
Atanu Mukherjee said:
I will definately do so. I also want to use CM14.1 but i want to do so step by step. Actually after facing issues 2-3 times i am little bit worry now. That is true. So hesitate to perform both at a single time.
Click to expand...
Click to collapse
You don't need to root if your going CM, flash TWRP, backup, and flash CM. You don't need to over complicate it.
If you boot (not flash) TWRP and backup then get a copy to safe place there is little risk of anything going wrong.
acejavelin said:
You don't need to root if your going CM, flash TWRP, backup, and flash CM. You don't need to over complicate it.
If you boot (not flash) TWRP and backup then get a copy to safe place there is little risk of anything going wrong.
Click to expand...
Click to collapse
Ok. But is there any regular chance of going wrong during flash TWRP or flash CM? I backed up all internal important data to external sd card and when I perform these process I just remove that sd from phone.
You pls tell me how to go to home screen after flashing TWRP?
And if I need to root it later then also what to do then? I mean if then I press power and vol minus then will I get TWRP recovery to root it or it will be redirectred to phone custom recovery?
Atanu Mukherjee said:
Ok. But is there any regular chance of going wrong during flash TWRP or flash CM? I backed up all internal important data to external sd card and when I perform these process I just remove that sd from phone.
You pls tell me how to go to home screen after flashing TWRP?
And if I need to root it later then also what to do then? I mean if then I press power and vol minus then will I get TWRP recovery to root it or it will be redirectred to phone custom recovery?
Click to expand...
Click to collapse
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
acejavelin said:
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
Click to expand...
Click to collapse
Thank you very much for your kind guidance and quick reply. I will perform this may be tomorrow and then inform you. If it is bricked or stucked in any stage/page then is there any instant process to go back to safety?
acejavelin said:
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
Click to expand...
Click to collapse
I am listing here only the commands,u just tell me is this ok?
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot boot twrp.img
Will these commands directly take me to twrp page?
And here I put a pic of the twrp page. If I dont want to root it then what to do? Click reboot option or anything else to do?
Atanu Mukherjee said:
I am listing here only the commands,u just tell me is this ok?
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot boot twrp.img
Will these commands directly take me to twrp page?
And here I put a pic of the twrp page. If I dont want to root it then what to do? Click reboot option or anything else to do?
Click to expand...
Click to collapse
Your last two are redundant, either flash or boot, you don't have to do both, but each has a purpose... Flash is permanent, boot is transient and will disappear on a reboot.
Boot TWRP first, the first time it will not take you to the main page initially but show you a notification page asking if you want allow it to make changes to the system or keep it read-only, this time only do not allow changes... Then the main screen of TWRP will be displayed and you should do a full backup of all partitions to the SD card.
Flash will just write the recovery partition, it doesn't start anything, you select recovery from the fastboot menu to start it.
acejavelin said:
Your last two are redundant, either flash or boot, you don't have to do both, but each has a purpose... Flash is permanent, boot is transient and will disappear on a reboot.
Boot TWRP first, the first time it will not take you to the main page initially but show you a notification page asking if you want allow it to make changes to the system or keep it read-only, this time only do not allow changes... Then the main screen of TWRP will be displayed and you should do a full backup of all partitions to the SD card.
Flash will just write the recovery partition, it doesn't start anything, you select recovery from the fastboot menu to start it.
Click to expand...
Click to collapse
So after "fastboot boot twrp.img" i have to allow to make changes and have to do a nandroid backup. After that will I get option to "Reboot?"
And later when I went to recovery I will get twrp page instead of stock recovery? 1st I think I should flash cm13 then root then upgrade to 14.1 bcz still a feel little worry to root it on stock rom.
Atanu Mukherjee said:
So after "fastboot boot twrp.img" i have to allow to make changes and have to do a nandroid backup. After that will I get option to "Reboot?"
And later when I went to recovery I will get twrp page instead of stock recovery? 1st I think I should flash cm13 then root then upgrade to 14.1 bcz still a feel little worry to root it on stock rom.
Click to expand...
Click to collapse
No, almost every part of what your saying is wrong...
Boot twrp and do not allow changes first time and backup. This will give a clean backup to restore from if things go badly.
After this is complete, in TWRP go to Reboot menu and select Bootloader, flash TWRP, do not reboot but use the bootloader menu to start TWRP. This time allow it to make changes to system. At the main menu if twrp go to Reboot - Recovery the device will restart and TWRP will load automatically, this step will lock in twrp so the stock OS doesn't replace it.
You only need to root stock rom, you don't need to root CM roms as they are already rooted (there are a few roms that are not pre-rooted but they are rare and none of the ones your talking about). As far as CM 13 vs 14.1 I can't really help you but from I've read both are stable enough for a daily driver device.
acejavelin said:
No, almost every part of what your saying is wrong...
Boot twrp and do not allow changes first time and backup. This will give a clean backup to restore from if things go badly.
After this is complete, in TWRP go to Reboot menu and select Bootloader, flash TWRP, do not reboot but use the bootloader menu to start TWRP. This time allow it to make changes to system. At the main menu if twrp go to Reboot - Recovery the device will restart and TWRP will load automatically, this step will lock in twrp so the stock OS doesn't replace it.
You only need to root stock rom, you don't need to root CM roms as they are already rooted (there are a few roms that are not pre-rooted but they are rare and none of the ones your talking about). As far as CM 13 vs 14.1 I can't really help you but from I've read both are stable enough for a daily driver device.
Click to expand...
Click to collapse
After typing 'fastboot flash recovery twrp.img' i switch to recovery and select it. But it shows recovery failed,bla bla in red colour. I tried 3 times but same result. What to do? now again when I go to the recovery,i see still it is the stock recovery.
Whenever I try to flash something using flashify, when I boot up it says no command and I have to go into recovery mode and start it again. I'm on Android 6.0 rooted with TWRP
jdugery said:
Whenever I try to flash something using flashify, when I boot up it says no command and I have to go into recovery mode and start it again. I'm on Android 6.0 rooted with TWRP
Click to expand...
Click to collapse
When u use flashify to flash anything does it goes into stock recovery and gives u no command wid an android logo and a triangle?
As shown in the attachment?
Sagar_1401 said:
When u use flashify to flash anything does it goes into stock recovery and gives u no command wid an android logo and a triangle?
As shown in the attachment?
Click to expand...
Click to collapse
Yes it does.
jdugery said:
Yes it does.
Click to expand...
Click to collapse
Well why to use flashify when u already got custom recovery to flash?
Sagar_1401 said:
Well why to use flashify when u already got custom recovery to flash?
Click to expand...
Click to collapse
What should I use? Should I just use command prompt on my computer?
jdugery said:
What should I use? Should I just use command prompt on my computer?
Click to expand...
Click to collapse
Are you sure you still have TWRP installed? "No command" and the little green robot laying down is the stock recovery.
What are you trying to use flashify to do?
I've only used flashify to flash recovery and boot images, and that was on Samsung stuff where I didn't want to mess with Odin in the days before TWRP could flash images.
Fastboot would be a safe option for recovery or boot image flashing on this phone. Also, TWRP can flash boot and recovery images directly now too. Just pick Install -> Image and make sure you pick the right option for boot or recovery. Not much call for flashify now that TWRP can install images.
You could go full cowboy and flash stuff with dd and adb shell, but I wouldn't recommend it. You're one typo from disaster that way.
I'm with @jason2678 and it appears you don't have TWRP installed anymore, the "android on it's back" is a from stock recovery. You need to reflash TWRP as Flashify requires TWRP (or other custom recovery) to work properly.
Download the latest TWRP, flash it in fastboot, and try flashify again... or just flash whatever you were trying to use Flashify for in fastboot/TWRP directly.
I want to root my moto g4 plus(unlocked bootloader and twrp flashed). Anyone knows how to root moto g4 plus. And i also want to know that how to increase battery backup after rooting(is it a myth).
@ADITYA_KUMAR this has been asked and explained many times and once more.
- Take Backup
- get Elemental-X kernel (see development section and download correct one )
- flash with TWRP
- get latest SuperSU : SuperSU
- now you can follow same guide of MM from step 5 : Guide
Don't Forget to Take Backup..
____Mdd said:
@ADITYA_KUMAR this has been asked and explained many times and once more.
- Take Backup
- get Elemental-X kernel (see development section and download correct one )
- flash with TWRP
- get latest SuperSU : SuperSU
- now you can follow same guide of MM from step 5 : Guide
Don't Forget to Take Backup..
Click to expand...
Click to collapse
How to take backup and restore it. I flashed twrp image. Before rebooting twrp works fine. But after rebooting i am not able to open twrp. I think it got removed.
ADITYA_KUMAR said:
How to take backup and restore it. I flashed twrp image. Before rebooting twrp works fine. But after rebooting i am not able to open twrp. I think it got removed.
Click to expand...
Click to collapse
What happens if you select Recovery from Bootloader ? Is it booting in Stock Recovery ?
In TWRP go to Backup and make backup of /system /data /boot.
If anything bad happens while flashing/Rooting then you can restore it.
The first time, you must open TWRP from the bootloader directly or the recovery gets overwritten.
For rooting, you can flash Magisk instead of flashing SuperSu. Other steps remain exactly the same.
____Mdd said:
What happens if you select Recovery from Bootloader ? Is it booting in Stock Recovery ?
In TWRP go to Backup and make backup of /system /data /boot.
If anything bad happens while flashing/Rooting then you can restore it.
Click to expand...
Click to collapse
When i booted into recovery mode. It shows no command.
ADITYA_KUMAR said:
When i booted into recovery mode. It shows no command.
Click to expand...
Click to collapse
That's stock Recovery, you need to flash TWRP again.
____Mdd said:
That's stock Recovery, you need to flash TWRP again.
Click to expand...
Click to collapse
I flashed twrp 2 times. But every time i restarted my phone it removed automatically.
ADITYA_KUMAR said:
I flashed twrp 2 times. But every time i restarted my phone it removed automatically.
Click to expand...
Click to collapse
Did you flashed TWRP and with the next command booted immediately into twrp?
strongst said:
Did you flashed TWRP and with the next command booted immediately into twrp?
Click to expand...
Click to collapse
Commands used:
Fastboot flash recovery name.img
It gives output as image not signed or corrupt.
After that i typed command fastboot reboot bootloader.
I open recovery mode. It opens twrp. But after i restart my phone. It automatically removes the twrp.
ADITYA_KUMAR said:
Commands used:
Fastboot flash recovery name.img
It gives output as image not signed or corrupt.
After that i typed command fastboot reboot bootloader.
I open recovery mode. It opens twrp. But after i restart my phone. It automatically removes the twrp.
Click to expand...
Click to collapse
This is your problem. You must open recovery from the bootloader menu the very first time. Or TWRP is overwritten with stock recovery. I don't know why that is. But that is how it is...
baunthiyal said:
This is your problem. You must open recovery from the bootloader menu the very first time. Or TWRP is overwritten with stock recovery. I don't know why that is. But that is how it is...
Click to expand...
Click to collapse
It means that i don't have to run the fasboot reboot bootloader command and after finishing the flashing i have to open the recovery mode directly?
Yes
ADITYA_KUMAR said:
It means that i don't have to run the fasboot reboot bootloader command and after finishing the flashing i have to open the recovery mode directly?
Click to expand...
Click to collapse
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
baunthiyal said:
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
Click to expand...
Click to collapse
I need to root my stock nougat( june version).What should i do after that.
I'll tell you what I did.
1. Flash Elemental Ex kernel. https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836
2. Flash Magisk. https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
baunthiyal said:
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
Click to expand...
Click to collapse
It didn't work. I flashed twrp. I opened recovery mode by using volume down to scroll to recovery mode and power button to select it. I booted in twrp mode and rebooted system from there. After that i power off my phone and tried to open twrp again, but it is showing no commands only. I didn't boot into twrp again.
ADITYA_KUMAR said:
It didn't work. I flashed twrp. I opened recovery mode by using volume down to scroll to recovery mode and power button to select it. I booted in twrp mode and rebooted system from there. After that i power off my phone and tried to open twrp again, but it is showing no commands only. I didn't boot into twrp again.
Click to expand...
Click to collapse
Try commands,
fastboot oem fb_mode_set
fastboot flash recovery name.img
Fastboot oem fb_mode_clear
Then directly boot into recovery,
Then again boot into recovery through twrp itself (there is option for it in reboot) or try anything.
Thank you guys i successfully rooted my moto g4 plus(xt1643)