Need Recovery for 2.27.707.1 Asia WWE
Marshmallow
CID 038(If this is required)
Tried installing the new ota with an older recovery after restoring unmodified system image from twrp and it failed.
So i assume the newer recovery is needed...
Thanks for the help!
i in same situation i flsh twrp then cleanstate now im bricked. if someone has twrp backup. if its works... i dunno. also i tried to update b4 get twrp recovery but my cel got stuck at 25%
i need this recovery too......new ota dont install and stuck on 25%.....
do you have twrp stock backup?
---------- Post added at 03:13 AM ---------- Previous post was at 03:12 AM ----------
T3snake said:
Need Recovery for 2.27.707.1 Asia WWE
Marshmallow
CID 038(If this is required)
Tried installing the new ota with an older recovery after restoring unmodified system image from twrp and it failed.
So i assume the newer recovery is needed...
Thanks for the help!
Click to expand...
Click to collapse
do you have twrp stock bakup?
alexmegamass said:
do you have twrp stock backup?
---------- Post added at 03:13 AM ---------- Previous post was at 03:12 AM ----------
do you have twrp stock bakup?
Click to expand...
Click to collapse
Yes i do
T3snake said:
Yes i do
Click to expand...
Click to collapse
is there a chance for me to get it so I can restore my cell? Because I flash cleanslate now I have no signal .,.. thanks In advance . If you can upload it to mega...plz.i did not make any backup of my stock ROM
Sent from my SM-J700H using Tapatalk
alexmegamass said:
is there a chance for me to get it so I can restore my cell? Because I flash cleanslate now I have no signal .,.. thanks In advance . If you can upload it to mega...plz.i did not make any backup of my stock ROM
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
which cleanslate version did you flash?
did you try the older version if the newer one didnt work?
Uploading right now will post link tommorow... though not sure if my backup will work on your device
alexmegamass said:
is there a chance for me to get it so I can restore my cell? Because I flash cleanslate now I have no signal .,.. thanks In advance . If you can upload it to mega...plz.i did not make any backup of my stock ROM
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
there you go...
https://mega.nz/#!4tUC0CxJ!zt0H6rrhKN4J8q52VImQRffoUu3A5OEMtY4UVk1f75s
system backup twrp 2.27.707.1
T3snake said:
there you go...
https://mega.nz/#!4tUC0CxJ!zt0H6rrhKN4J8q52VImQRffoUu3A5OEMtY4UVk1f75s
system backup twrp 2.27.707.1
Click to expand...
Click to collapse
Thanks I will try your backup . I flashed 1.2.3. cleanslate Europe. But my cellphone is like turning off airplane mode and it shows no imei number neither baseband info.
Sent from my SM-J700H using Tapatalk
alexmegamass said:
Thanks I will try your backup . I flashed 1.2.3. cleanslate Europe. But my cellphone is like turning off airplane mode and it shows no imei number neither baseband info.
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
I'm back now I have signal GSM 3G and LTE but my camera is not working. Lol. I should reflash firmware.zip? My system is even showing update for 530mb
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC One M9PLUS using Tapatalk
T3snake said:
Need Recovery for 2.27.707.1 Asia WWE
Marshmallow
CID 038(If this is required)
Tried installing the new ota with an older recovery after restoring unmodified system image from twrp and it failed.
So i assume the newer recovery is needed...
Thanks for the help!
Click to expand...
Click to collapse
I did some kinda magic with my old update file ... This is stock recovery .. https://mega.nz/#!Bc5xzApA for 2.27.707.1 unzip rename to recovery and try to get new OTA 2.30.707.1 .. let me know if you could install it . I'm now trying to solve camera issue ... It's closing app now even showing img
Sent from my SM-J700H using Tapatalk
alexmegamass said:
I did some kinda magic with my old update file ... This is stock recovery .. https://mega.nz/#!Bc5xzApA for 2.27.707.1 unzip rename to recovery and try to get new OTA 2.30.707.1 .. let me know if you could install it . I'm now trying to solve camera issue ... It's closing app now even showing img
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
what is dec key bro ??? tell pls...i needed this recovery
DJ Mohammad KHAN said:
what is dec key bro ??? tell pls...i needed this recovery
Click to expand...
Click to collapse
WOW I did not put any key I found it now please check your inbox.
Sent from my SM-J700H using Tapatalk
alexmegamass said:
I did some kinda magic with my old update file ... This is stock recovery .. https://mega.nz/#!Bc5xzApA for 2.27.707.1 unzip rename to recovery and try to get new OTA 2.30.707.1 .. let me know if you could install it . I'm now trying to solve camera issue ... It's closing app now even showing img
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
downloaded and test it and tell you how it working...
i flashed this recovery and test install ota update.....again setup stuck in 25% and then error and reboot.....didn't work again....
DJ Mohammad KHAN said:
i flashed this recovery and test install ota update.....again setup stuck in 25% and then error and reboot.....didn't work again....
Click to expand...
Click to collapse
Lets await for T3SNAKE if he can update we can restore from his backup TWRP. Because mines is not installing it's pop up advice that my software is modified.. after download 500mb update
Sent from my HTC One M9PLUS using Tapatalk
alexmegamass said:
Lets await for T3SNAKE if he can update we can restore from his backup TWRP. Because mines is not installing it's pop up advice that my software is modified.. after download 500mb update
Sent from my HTC One M9PLUS using Tapatalk
Click to expand...
Click to collapse
i think we must find full RUU 2.30.707.1 and flash this to fix this problem....othervise we no way for fix it.....i try many way and always update stuck in 25%
DJ Mohammad KHAN said:
i think we must find full RUU 2.30.707.1 and flash this to fix this problem....othervise we no way for fix it.....i try many way and always update stuck in 25%
Click to expand...
Click to collapse
Yours is rooted ? I can't update because I'm super CID and it's pop up message that my cellphone is modified...Also my camera app is not opening I downloaded other camera app also is not working..
Sent from my HTC One M9PLUS using Tapatalk
alexmegamass said:
Yours is rooted ? I can't update because I'm super CID and it's pop up message that my cellphone is modified...Also my camera app is not opening I downloaded other camera app also is not working..
Sent from my HTC One M9PLUS using Tapatalk
Click to expand...
Click to collapse
my friend go to this link : http://www.apkmirror.com/apk/htc-corporation/htc-camera-new/
download different camera.apk from here and install on your device...
maybe fix your problem....
othervise your problem is hardware issue...
DJ Mohammad KHAN said:
my friend go to this link : http://www.apkmirror.com/apk/htc-corporation/htc-camera-new/
download different camera.apk from here and install on your device...
maybe fix your problem....
othervise your problem is hardware issue...
Click to expand...
Click to collapse
Not working. Dunno maybe camera driver ??
Sent from my HTC One M9PLUS using Tapatalk
Related
Hello ..
EDIT: Problem Solved-Disable LGE modem
Can anyone help me?
i cant seem to flash through kdz..
log-
Code:
[R&D Test Tools Log File]
15:01:51 : Launching SW update
15:01:51 : Unpacking KDZ
15:02:02 : KDZ file extraced
15:02:21 : Files were extracted.
15:02:21 : LGMobileDL Load.
15:02:21 : Port = -2
15:02:21 : Connecting to phone
15:02:21 : PHONE WAS NOT FOUND!
15:02:24 : ===FINISHED===
model e612/612(f)
Thanks
Bump anyone ?
103 views no replies ..
Sent from my LG-E612 using xda app-developers app
Baseband of v20a,b and c are same.
Flash it in recovery..
You have to update your phone to v20 baseband .. Use this link to download the rom: http://yadi.sk/d/jPCPa8sr7lzka
Once downloaded just update it using kdz updater (if you doubt the kdz, look for tutorials by google, there is many of them out there).
Then reboot into CWM and flash the CyanogenMod 10.1 ..
rafael96 said:
You have to update your phone to v20 baseband .. Use this link to download the rom: http://yadi.sk/d/jPCPa8sr7lzka
Once downloaded just update it using kdz updater (if you doubt the kdz, look for tutorials by google, there is many of them out there).
Then reboot into CWM and flash the CyanogenMod 10.1 ..
Click to expand...
Click to collapse
Suppose I brick my phone ...
So should I flash V20 or something?
C
Sent from my LG-E612 using xda app-developers app
Psykic said:
Suppose I brick my phone ...
So should I flash V20 or something?
C
Sent from my LG-E612 using xda app-developers app
Click to expand...
Click to collapse
Yes this rom flashable with kdz will recover your l5
Psykic said:
Suppose I brick my phone ...
So should I flash V20 or something?
C
Sent from my LG-E612 using xda app-developers app
Click to expand...
Click to collapse
that v20 means JB version for you phone, v10 is ICS
Sabyn said:
that v20 means JB version for you phone, v10 is ICS
Click to expand...
Click to collapse
Just realised I have e612f ..
Is it true that I can only root it ...nothing else
Sent from my LG-E612 using xda app-developers app
Psykic said:
Just realised I have e612f ..
Is it true that I can only root it ...nothing else
Sent from my LG-E612 using xda app-developers app
Click to expand...
Click to collapse
you have CM10.1 for it, why you say you can only to root it?)
Sabyn said:
you have CM10.1 for it, why you say you can only to root it?)
Click to expand...
Click to collapse
Becoz im having problems unlocking the bootloader :/
the emmc_appsboot provided is 273 Kb and my bakup is 4.0 Mb
after i use it i get continuous reboots ....
I am still looking for help...
P.S- i edited Op ...I got a problem with Kdz ....would be thankful if you could help
Edit - unlocked bootloader and installed CWM successfully ! big thanks to this man - @DevastatingTech
Now only Kdz can't detect device :/:fingers-crossed:
Psykic said:
Now only Kdz can't detect device :/:fingers-crossed:
Click to expand...
Click to collapse
did you try this method: http://forum.gsmhosting.com/vbb/f177/guide-how-update-kdz-firmware-1629632/
also, make sure to put it in debugging mode.
mircea89fzr said:
did you try this method: http://forum.gsmhosting.com/vbb/f177/guide-how-update-kdz-firmware-1629632/ ?
also, make sure to put it in debugging mode.
Click to expand...
Click to collapse
Or you can do it via download mode (hold down volume + or volume - (depends on rom)) while connecting usb WITH THE DEVICE OFF!!! (shutdown before connect)
I made this tutorial for flashing offline with the LG mobile support tool http://forum.xda-developers.com/showthread.php?p=44707571
It has to work for you too.
mircea89fzr said:
I made this tutorial for flashing offline with the LG mobile support tool http://forum.xda-developers.com/showthread.php?p=44707571
It has to work for you too.
Click to expand...
Click to collapse
But I have an e612 ...
Will it work ?
Sent from my LG-E612 using xda app-developers app
raul338 said:
Or you can do it via download mode (hold down volume + or volume - (depends on rom)) while connecting usb WITH THE DEVICE OFF!!! (shutdown before connect)
Click to expand...
Click to collapse
But kdz can't detect my phone
Sent from my LG-E612 using xda app-developers app
mircea89fzr said:
did you try this method: http://forum.gsmhosting.com/vbb/f177/guide-how-update-kdz-firmware-1629632/
also, make sure to put it in debugging mode.
Click to expand...
Click to collapse
But my phone is switched off in emergency mode isn't it?
Sent from my LG-E612 using xda app-developers app
Psykic said:
But my phone is switched off in emergency mode isn't it?
Sent from my LG-E612 using xda app-developers app
Click to expand...
Click to collapse
no, in emergency mode the phone displays something (emergency mode, download mode etc). it isn't switched off.
if you do everything right, you should be able to flash the kdz. the lg mobile support tool has a "phone recovery" function which puts any lg phone in emergency mode and flashes the default rom (it is downloaded from lg). with the tutorial i made, you fool the lg mobile support tool to believe the kdz you chose is the one it's supposed to download and flash.
mircea89fzr said:
no, in emergency mode the phone displays something (emergency mode, download mode etc). it isn't switched off.
if you do everything right, you should be able to flash the kdz. the lg mobile support tool has a "phone recovery" function which puts any lg phone in emergency mode and flashes the default rom (it is downloaded from lg). with the tutorial i made, you fool the lg mobile support tool to believe the kdz you chose is the one it's supposed to download and flash.
Click to expand...
Click to collapse
Will it work on e612 ...
There is only e610 there...
Sent from my LG-E612 using xda app-developers app
Psykic said:
Will it work on e612 ...
There is only e610 there...
Sent from my LG-E612 using xda app-developers app
Click to expand...
Click to collapse
YES. Try reading everything because I said it before:
mircea89fzr said:
I made this tutorial for flashing offline with the LG mobile support tool http://forum.xda-developers.com/showthread.php?p=44707571
It has to work for you too.
Click to expand...
Click to collapse
Here you will find a kdz rom for your phone: http://lg-phone-firmware.com/index.php?id_mod=12
And here is says how to install it, step by step: http://forum.xda-developers.com/showthread.php?p=44707571
I downloaded and extracted the files...
Um.....is this fine?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: After disabling LGE Modem kdz went past phone not found but now
------------------START----------------------
Model Dll Msg Not Found(206, 0)
--------------------END-----------------------
Edit2:
Oh! it actually counted to 100 after that ....all i needed to do was wait....(its much much slower than Odin)
Thank You!!
@mircea89fzr - the final hint that i was missing
@DevastatingTech - bootloader and other loads of help
@raul338 - download mode
Is there any way to root the Samsung Galaxy S3 Neo i9301i with Android 4.4.2 KitKat on it?
Hope somebody can help me :fingers-crossed:
ViktorFoedowski said:
Is there any way to root the Samsung Galaxy S3 Neo i9301i with Android 4.4.2 KitKat on it?
Hope somebody can help me :fingers-crossed:
Click to expand...
Click to collapse
Still no answers?
I'd also like to root this device.
Maybe with towelroot?
+1 for supporting rooting s3 neo
Thx
Towelroot works brother
Sent from my GT-I9300I using Tapatalk
ViktorFoedowski said:
Is there any way to root the Samsung Galaxy S3 Neo i9301i with Android 4.4.2 KitKat on it?
Hope somebody can help me :fingers-crossed:
Click to expand...
Click to collapse
+1
---------- Post added at 10:21 AM ---------- Previous post was at 10:19 AM ----------
mianahmadpp said:
Towelroot works brother
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
no for me, popup advise that device not supported
---------- Post added at 10:25 AM ---------- Previous post was at 10:21 AM ----------
vroot no work, until now
Sent from my GT-I9301I
---------- Post added at 10:36 AM ---------- Previous post was at 10:25 AM ----------
framaroot no work
Sent from my GT-I9301I
---------- Post added at 10:46 AM ---------- Previous post was at 10:36 AM ----------
POOT no work
Sent from my GT-I9301I
rod555 said:
no for me, popup advise that device not supported
Click to expand...
Click to collapse
you propably updated to the new version of Kitkat 4.4.2.
The new update had the bandversion I9301IXXUANF4 for me (I updated too) (there is no possible way to root this version as far as i know)
But the not updated version of KitKat 4.4.2 (bandversion for me: I9301IXXUANC6) works with towelroot.
Beside i updated to the new update i still got my phone rooted:
I downloaded the new version of Odin on my pc.
I downloaded the old version from sammobile. (the I9301IXXUANC6 version)
In Odin (launched with admin rights) you click on the PDA (or sometimes AP called) button and select the downloaded firmware version (unpacked)
Next boot your phone in recovery mode (turn it off, then press volume down + home + power button)
Connect your phone to your pc (after that odin should recognize your phone)
Now make sure re-partition is NOT checked in odin !this is very important! and click start (now wait some time until its finished)
Your phone should reboot automatic (if auto reboot is checked in odin) and the old firmware should be on your phone
Now install towelroot and click "make it rain"
Now you should have root! :laugh:
(Hope this helps. Sorry for my bad english... :crying: )
Have you tried this tutorial?
How to root Samsung Galaxy S3 Neo GT-I9301I
Hopes help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
cacing32 said:
Have you tried this tutorial?
How to root Samsung Galaxy S3 Neo GT-I9301I
Hopes help.
Click to expand...
Click to collapse
yes, but when I launch app advise that my device isn't supported
Sent from my GT-I9301I
ViktorFoedowski said:
you propably updated to the new version of Kitkat 4.4.2.
The new update had the bandversion I9301IXXUANF4 for me (I updated too) (there is no possible way to root this version as far as i know)
But the not updated version of KitKat 4.4.2 (bandversion for me: I9301IXXUANC6) works with towelroot.
Beside i updated to the new update i still got my phone rooted:
I downloaded the new version of Odin on my pc.
I downloaded the old version from sammobile. (the I9301IXXUANC6 version)
In Odin (launched with admin rights) you click on the PDA (or sometimes AP called) button and select the downloaded firmware version (unpacked)
Next boot your phone in recovery mode (turn it off, then press volume down + home + power button)
Connect your phone to your pc (after that odin should recognize your phone)
Now make sure re-partition is NOT checked in odin !this is very important! and click start (now wait some time until its finished)
Your phone should reboot automatic (if auto reboot is checked in odin) and the old firmware should be on your phone
Now install towelroot and click "make it rain"
Now you should have root! :laugh:
(Hope this helps. Sorry for my bad english... :crying: )
Click to expand...
Click to collapse
one billion of thanks! run perfectly [emoji106]
Sent from my GT-I9301I
rod555 said:
one bullion of thanks! run perfectly
Click to expand...
Click to collapse
No problem. I just wanted to help.
Sent from my GT-I9301I using XDA Premium 4 mobile app
Well, I hope that there will be a root app for I9301IXXUANF4 soon.
I've got some bad memories of doing anything to my phone with ODIN. App is the only non-destructive way for me.
Does anyone know how much time developer needs to release his updated app after new version of Android?
in download mode do you have trace of knox?
i can't understand if it's only a software knox or a hardware one (efuse) like on the s4
you can enter in download mode by doing:
The phone must be turned off.
Keep pressing and holding ‘Home Button (middle button) + Volume down key + Power Button’ simultaneously until you see a warning message. Now press Volume Up to continue. This will land you into downloading mode.
Click to expand...
Click to collapse
If you read "knox warranty etc..." there is a hardware-efuse knox
Help
Hello the root worked. but I can not runterladen..kann the SU file a reinstellen here bitte..soory I can not speak English and write here about the google translator
ViktorFoedowski said:
you propably updated to the new version of Kitkat 4.4.2.
....
Beside i updated to the new update i still got my phone rooted:
....
(Hope this helps. Sorry for my bad english... :crying: )
Click to expand...
Click to collapse
Do you mean that you can downgrade, then root and then again apply the update installing the "F4" version of firmware?
Thanks
Proteusso said:
Do you mean that you can downgrade, then root and then again apply the update installing the "F4" version of firmware?
Thanks
Click to expand...
Click to collapse
No I just wanted to say that I updated my phone to the "F4" version. And after I found that the updated version cannot be rooted I downgraded the phone and rooted it. I am still on the old "C6" version.
Sent from my GT-I9301I using XDA Premium 4 mobile app
Give it a try
ViktorFoedowski said:
No I just wanted to say that I updated my phone to the "F4" version. And after I found that the updated version cannot be rooted I downgraded the phone and rooted it. I am still on the old "C6" version.
Sent from my GT-I9301I using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello,
i think we give it a try. Will there be root when you update again?
Harzer30 said:
Hello,
i think we give it a try. Will there be root when you update again?
Click to expand...
Click to collapse
The same question here... Then can I upgrade to ANF4 again with root saved?
BaRTaSs88 said:
Can I upgrade to ANF4 again with root saved?
Click to expand...
Click to collapse
I don't think so but I'm not sure. I didn't try updating with root.
Sent from my GT-I9301I using XDA Premium 4 mobile app
BaRTaSs88 said:
The same question here... Then can I upgrade to ANF4 again with root saved?
Click to expand...
Click to collapse
no, if you upgrade root it's not saved. Until AND3 firmware yes
Sent from my GT-I9301I
Only C6 can be rooted, and as far as I can see there are not that changes with ANF4 and the newer!
So if you really need follow the steps of some posts before!
H3G M7 Guru Reset Rom + File Collection
HTML:
In this thread I will be sharing my collection of file's for the HTC One M7 on H3G. All these files will be useful for returning to stock especially those with s-on. I hope someone finds them useful anyway [emoji14] All files in this thread are suitable for devices with the following CiD and MiD
Code:
modelid: PN0710000
cidnum: H3G__001
cidnum: H3G__106
cidnum: H3G__402
cidnum: H3G__G04
Guru Reset Rom Stock KitKat 6.14.771.2Guru_Reset_M7_H3G_6.14.771.2.zip MD5 :- 676e56aa7e5e725387b65dd14e322fba
Includes optional Stock Recovery, Stock Radio and Root.
Install with TWRP recovery like any other rom. (TWRP 2.6.3.3 Recommended)
OTA updates when available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to @crushalot www.htc1guru.com for the original aroma guru reset package.
Stock Nandroid BackupsKitKat 4.4.3 6.14.771.2 TWRP Nandroid MD5 :- 72c8152a8179fbd4cb2d2e5b8b35b905
Full Stock for OTA's
KitKat 4.4.2 5.12.771.3 TWRP Nandroid
Full Stock for OTA's
JellyBean 4.3 3.62.771.3 TWRP Nandroid
Pre-Rooted and missing Preload Data, Not suitable for taking OTA's
Firmware Zips 2.24.771.3.zip MD5:- a56305ea6570ee4ff656a4357171ce11
3.62.771.3.zip MD5:- ba684b5207d74e24075cd4b02ead3ba1
4.20.771.17.zip MD5:- d4fba9da51321b95741440b647bc9bee
5.12.771.3.zip MD5:- 64f0d0a23fb5468d669bb2f922043d9c
6.14.771.2.zip MD5:- 0dd432cbf3ddddcdd74ee669b44ee376
7.19.771.1.zip MD5:- 0ec86aefeadf7e3c0e37fafaa1192777
OTA Update ZipOTA_M7_UL_JB_50_SENSE5_H3G_UK_2.24.771.3-1.28.771.6_release_328027_signedlnazfd1l6874pvs8.zip MD5:- d1eecfce64c7847a2ee35a9e9be8ca95
OTA_M7_UL_JB43_SENSE55_MR_H3G_UK_3.62.771.2-2.24.771.3_release_338684cjuf0j4gm1ogoo4n.zip MD5:- c7798f585b4ff326a3b8bad083ba05ed
OTA_M7_UL_K44_SENSE55_MR_H3G_UK_4.20.771.17-3.62.771.3_release_3536491kghgv33dtz4m18n.zip MD5:- 583dae463ffdf61b337f7946ed9db01a
OTA_M7_UL_K44_SENSE60_MR_H3G_UK_5.12.771.3-4.20.771.17_release_37214948ro8l36c6yo7dhi.zip MD5:- 44a3956d277141886af7ebc60a072766
OTA_M7_UL_K443_SENSE60_MR_H3G_UK_6.14.771.2-5.12.771.3_release_387423qg91a2pgfo5cx9ic.zip MD5:- 3dca820e82014f04afba66b41735bba4
OTA_M7_UL_L50_SENSE60_MR_H3G_UK_7.19.771.1-6.14.771.2_release_420807iloxunzwjif4idfm.zip MD5:- 3dca820e82014f04afba66b41735bba4
What is H3G?
Which one should i have to use?
i'm on firmware 6.09.401.11, HTC__001 and S-ON.
Black_Eyes said:
What is H3G?
Which one should i have to use?
i'm on firmware 6.09.401.11, HTC__001 and S-ON.
Click to expand...
Click to collapse
H3G is the mobile carrier Three these files are no good to you. I believe you requested a nandroid backup for your device in the collection thread. Take a look I posted a link there for you
http://forum.xda-developers.com/showthread.php?p=58690924
Danny201281 said:
H3G is the mobile carrier Three these files are no good to you. I believe you requested a nandroid backup for your device in the collection thread. Take a look I posted a link there for you
http://forum.xda-developers.com/showthread.php?p=58690924
Click to expand...
Click to collapse
Thanks Again
They all look extremely tempting and I actually understand which each file is, well almost hehe. Which would you recommend downloading in order to start from scratch on the HTC One M7 to be able to download OTA's? Or would it be quicker to just flash stock recovery?
Sacrimony said:
They all look extremely tempting and I actually understand which each file is, well almost hehe. Which would you recommend downloading in order to start from scratch on the HTC One M7 to be able to download OTA's? Or would it be quicker to just flash stock recovery?
Click to expand...
Click to collapse
It depends on your current situation. If you have the Stock Rom complete with Preload data. Then flashing the Stock Recovery should do the trick just fine with little hassle.
If you have a Custom Rom or have at some point unlocked the bootloader with your Stock Rom then the Guru Reset would be your best option. As Unlocking the bootloader wipes the Stock preload data which will cause the OTA to fail.
Danny201281 said:
It depends on your current situation. If you have the Stock Rom complete with Preload data. Then flashing the Stock Recovery should do the trick just fine with little hassle.
If you have a Custom Rom or have at some point unlocked the bootloader with your Stock Rom then the Guru Reset would be your best option. As Unlocking the bootloader wipes the Stock preload data which will cause the OTA to fail.
Click to expand...
Click to collapse
Ah I see, well I think I fall under the latter category. So is it just a case of downloading the guru .zip and then booting into TWRP and then flashing the .zip through there? ?
Sent from my HTC One using XDA Free mobile app
Sacrimony said:
Ah I see, well I think I fall under the latter category. So is it just a case of downloading the guru .zip and then booting into TWRP and then flashing the .zip through there? ?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Yes the gurureset flashes in recovery. It uses the Aroma installer and can flash the Stock Recovery for you this is an option during the installer setup :good:
Danny201281 said:
Yes the gurureset flashes in recovery. It uses the Aroma installer and can flash the Stock Recovery for you this is an option during the installer setup :good:
Click to expand...
Click to collapse
Ah that is fantastic! So everything I need is included in the guru zip? Man, one again you've been amazing. Thank you so much!
Sent from my HTC One using XDA Free mobile app
Just a quick update on the guru zip. Everything has worked perfectly, up and running as new. Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked. Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Sent from my HTC One using XDA Free mobile app[/QUOTE]
Sacrimony said:
Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked.
Click to expand...
Click to collapse
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Click to expand...
Click to collapse
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Sacrimony said:
Just a quick update on the guru zip. Everything has worked perfectly, up and running as new. Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked. Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
alray said:
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Click to expand...
Click to collapse
Yep what @alray said ,
Just for clarity, with the stock recovery if your getting a black screen followed by a picture of a phone with a red exclamation mark then that's normal. That is the stock recovery. To reveal the recovery menu hold volume up and press the power button. You will see some errors about unable to mount sdcard this is also normal. The recovery is looking for an sd card slot which the M7 doesn't have. We only have the internal storage :good:
Danny201281 said:
Yep what @alray said ,
Just for clarity, with the stock recovery if your getting a black screen followed by a picture of a phone with a red exclamation mark then that's normal. That is the stock recovery. To reveal the recovery menu hold volume up and press the power button. You will see some errors about unable to mount sdcard this is also normal. The recovery is looking for an sd card slot which the M7 doesn't have. We only have the internal storage :good:
Click to expand...
Click to collapse
alray said:
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Click to expand...
Click to collapse
Ah I understand now. That is really helpful, thanks both of you for clearing that up. I've read on a couple of sites that you may need to re-lock the bootloader and to get rid of the "Tampered" sign if you're to receive OTA updates, do you guys know if that's the case?
Sacrimony said:
Ah I understand now. That is really helpful, thanks both of you for clearing that up. I've read on a couple of sites that you may need to re-lock the bootloader and to get rid of the "Tampered" sign if you're to receive OTA updates, do you guys know if that's the case?
Click to expand...
Click to collapse
The guru reset is everything you need to be ready for the OTA. :good: Unlocked bootloader is fine as long as the software is stock :good:
Danny201281 said:
The guru reset is everything you need to be ready for the OTA. :good: Unlocked bootloader is fine as long as the software is stock :good:
Click to expand...
Click to collapse
Ok, that's awesome. Many thanks once again for your help and for your patience with my annoying questions!
Sacrimony said:
Ok, that's awesome. Many thanks once again for your help and for your patience with my annoying questions!
Click to expand...
Click to collapse
Your welcome :good: it's better to get it right first time, than to try and fix it after it's gone wrong
It gets stuck at 10%.
GeoVali99 said:
It gets stuck at 10%.
Click to expand...
Click to collapse
Which recovery are you using?
TWRP 2.8
But it's irrelevant now. After a couple of system formattings it did install.
GeoVali99 said:
TWRP 2.8
But it's irrelevant now. After a couple of system formattings it did install.
Click to expand...
Click to collapse
Ok cool, for the record though installs getting stuck happens a lot with TWRP 2.8.X.X :good:
That's why I recommend 2.6.3.3 but glad you got sorted though. If youhavent checked recently h3g are pushing the update now
Gonna have to close the download Link temporarily. Got 1 report of Boot Issues...
I made this TWRP Back-up for you all that took the OE1 OTA And Would Like To Rock Hybrid-X 2.2.
The TWRP back-up contains Boot, Recovery (TWRP of course), System & Cache Partitions. No Data Or EFS.
At first Time Boot, It Will Go Through The Set-Up Process As If It Were A First Time Rom Flash.There Is
No Data That Wasn't In The Original Rom @tx_dbs_tx Cooked Up With 2 Exceptions:
1.Updated SuperSU To v2.49
2.Updated Galaxy Tools To v 3.1.8
Other Than That It Is As @tx_dbs_tx Made It, Without The Data Partition.
Go To Nandroid Download Link:
Here
Now, As I Am On OB7 (Hybrid-X 2.2) I Can't Test This On OE1 But Some Members Who Are A Lot Smarter Than
I Am Believe To High Degree Of Certainty It Will Get It Done.
Make Sure You Have A Back-Up Of Your Current Configuration!
Standard Stuff... Blah, Blah, Blah. Hate Standard stuff... Gimme Brick's, Cracked Screen's, OE1 And I'll
Cry Myself HAPPY!
EDIT:
You may have to update Profile & Prl after flashing this back-up
Id like to try this but im bout to head to work, subscribed and hope this works
Will report back
pbedard said:
Will report back
Click to expand...
Click to collapse
Appreciate it.
Its no good doesnt boot phone turns on but vibrates and goes black then turns off
pbedard said:
Its no good doesnt boot phone turns on but vibrates and goes black then turns off
Click to expand...
Click to collapse
Ok, thanks..
Damn :/
l330n said:
Damn :/
Click to expand...
Click to collapse
I'm going to put in some time tomorrow and try to get this figured out.
jhill110 said:
I'm going to put in some time tomorrow and try to get this figured out.
Click to expand...
Click to collapse
I didn't see the modem listed as included in your file. Wouldn't you need that to get the baseband back to OB7?
Sent from my SM-N910P using XDA Premium HD app
DreamingWolf said:
I didn't see the modem listed as included in your file. Wouldn't you need that to get the baseband back to OB7?
Sent from my SM-N910P using XDA Premium HD app
Click to expand...
Click to collapse
Yea u can find it somewhere here but IG don't boot still
pbedard said:
Yea u can find it somewhere here but IG don't boot still
Click to expand...
Click to collapse
I pushed baseband back to OB7 through a TWRP restore and am running Hybrid-X 2.2 right now. I flashed the ROM from their thread and the r16 emotion kernel and it booted fine. Baseband still shows OB7 though I know the bootloader is still OE1 because Odin fails eveytime on aboot.
Sent from my SM-N910P using XDA Premium HD app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N910P using XDA Premium HD app
DreamingWolf said:
I pushed baseband back to OB7 through a TWRP restore and am running Hybrid-X 2.2 right now. I flashed the ROM from their thread and the r16 emotion kernel and it booted fine. Baseband still shows OB7 though I know the bootloader is still OE1 because Odin fails eveytime on aboot.
Sent from my SM-N910P using XDA Premium HD app
Click to expand...
Click to collapse
Where did you get the baseband can you post it so we me be able to flash back?
kennethbb said:
Where did you get the baseband can you post it so we me be able to flash back?
Click to expand...
Click to collapse
I used a TWRP backup of an OB7 ROM that included all the partitions, especially the modem.
@Droid2drummer has a copy of my partitions to test. If it works for him I will post the link publicly.
UPDATE:
Spent today trashing and fixing my phone. I figured out that I didn't revert the baseband through a TWRP restore. (I have an OE1 base backup and I flashed the modem from that half a dozen times and it never changed to OE1 baseband). That means it must have been through one of the Odin flashes I did (that failed, but apparently AFTER writing the modem.bin)
Does anyone have an OE1 modem.bin? I can pull the boot.img from my TWRP backup, but the modem isn't stored in a bin format. I need one so I can test my theory.
Or, if there is a brave soul out there, I made an Odin flashable tar file of the OB7 modem and the r16 emotion kernel. I have flashed it multiple times on my phone with no issues. I know it changes the kernel because I have another file with the OB7 modem and the OB7 stock kernel that I was using as a base.
If anyone is willing to try the OB7modem/emotion kernel file and report back you can download it here.
Sent from my SM-N910P using XDA Premium HD app
Anyone confirm this working? I know dream has it working. Just checking. My phone didnt take the retore backup file
Sent from my SM-N910P using XDA Free mobile app
Im on it! It works. Just flash the modem tar in the section dreaming wolf posted. About to make another backup. So i have one oe1 complete. Then this one hybrid modem boot (i call it hybrid) so now i should be good to go. Now i think is the time to create a thread and secure this to keep the rom threads cleaned. Thank you all. Im reporting from fresh install via odin modem tar bob7 on oe1. I will test flash a bob7 rom and get back.
Sent from my SM-N910P using XDA Free mobile app
DreamingWolf said:
I used a TWRP backup of an OB7 ROM that included all the partitions, especially the modem.
@Droid2drummer has a copy of my partitions to test. If it works for him I will post the link publicly.
UPDATE:
Spent today trashing and fixing my phone. I figured out that I didn't revert the baseband through a TWRP restore. (I have an OE1 base backup and I flashed the modem from that half a dozen times and it never changed to OE1 baseband). That means it must have been through one of the Odin flashes I did (that failed, but apparently AFTER writing the modem.bin)
Does anyone have an OE1 modem.bin? I can pull the boot.img from my TWRP backup, but the modem isn't stored in a bin format. I need one so I can test my theory.
Or, if there is a brave soul out there, I made an Odin flashable tar file of the OB7 modem and the r16 emotion kernel. I have flashed it multiple times on my phone with no issues. I know it changes the kernel because I have another file with the OB7 modem and the OB7 stock kernel that I was using as a base.
If anyone is willing to try the OB7modem/emotion kernel file and report back you can download it here.
Sent from my SM-N910P using XDA Premium HD app
Click to expand...
Click to collapse
Attention. Its a go!
Sent from my SM-N910P using XDA Free mobile app
---------- Post added at 01:17 AM ---------- Previous post was at 12:53 AM ----------
Droid2drummer said:
Attention. Its a go!
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
Ok. So i was successful in the tar flash of modem etc. Said update successful as well. I backed up the boot bob7 modem etc. Then tried to flash hybrid v2 rom. No go. Sorry. Not sure why. More testing i guess. I tried a kernel as well and no. So i got a bit excited. I hope we get a tar of beyond bob7 soon. That way my true testing will be safer in its trials. Im not sure what else to try. Unless i wipe internal. And then try the entire process. However not so sure. It is possible as dreaming wolf has done it. Need more time. Until then. Thank you all.
Sent from my SM-N910P using XDA Free mobile app
Droid2drummer said:
Ok. So i was successful in the tar flash of modem etc. Said update successful as well. I backed up the boot bob7 modem etc. Then tried to flash hybrid v2 rom. No go. Sorry. Not sure why. More testing i guess. I tried a kernel as well and no. So i got a bit excited. I hope we get a tar of beyond bob7 soon. That way my true testing will be safer in its trials. Im not sure what else to try. Unless i wipe internal. And then try the entire process. However not so sure. It is possible as dreaming wolf has done it. Need more time. Until then. Thank you all.
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
Does your baseband show up as BOB7 in the ROM you're currently running? - EDIT just saw you followup post, ignore this question.
Don't know if it makes a difference, but my flash process almost never varies. I factory reset X3, format data X3, advanced wipe everything except extsdcard X3, then flash Uberwipe.zip which reboots me into recovery (I seem to recall, I think it was with the Note 3, that certain flashings would work better if the phone was rebooted into recovery between the wiping of the old and the flashing of the new), then I flash the ROM, wipe cache and Dalvik, flash the kernel (if applicable, with Hybrid i flashed r16 seperately), wipe cache and Dalvik, then flash SuperSU (usually the beta 2.49 version), wipe cache and Dalvik, and after all that I will finally reboot into the system.
Obsessive I know, but following that proceedure I almost never have problems. And anything I usually need on the internal card I copy to the external then move back after the flash.
And +1 on getting a post OB7 tar soon.
Yeah. Even after restoring my oe1 backup still reads bob7 build and bob7 as i showed in screeny. Then oe1 baseband
Sent from my SM-N910P using XDA Free mobile app
---------- Post added at 02:39 AM ---------- Previous post was at 01:47 AM ----------
Droid2drummer said:
Yeah. Even after restoring my oe1 backup still reads bob7 build and bob7 as i showed in screeny. Then oe1 baseband
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
No sorry. Build number only shows oe1. Rest is bob7
Sent from my SM-N910P using XDA Free mobile app
???
Hi guys!
I was using my phone normally, Suddenly out of nowhere it hang and starts rebooting and stuck on android one logo.
I tried everything like changing slot, fastboot reboot etc. nothing seems to work. I can access the fastboot and recovery mode though. I tried wiping data through recovery but it also stuck midway saying "Wiping user data-- Formatting/data..."
Also tried flashing stock rom using OST but that doesn't work as the bootloader is locked. I contacted some Nokia tech persons they said it could be eMMC failure and changing the motherboard could cost around 7k(INR), I'm very much disappointed.
Can anyone help? Thanks in advance!
Is it a 2018 model which you have purchased? If so then there are cases where eMMC has been faulty. But unless you had been experimenting with the phone, i dont see a probability. OST LA wont work on locked bootloaders. Try asking hikaricalyx, he is well known developer in the Nokia Community, search for his telegram group.
id pass ost tool can flash ur device.but if emmc damaged it cant imgage error will show.. flashed nokia 6.1 plus but emmc was dead.this error will show when emmc damaged
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my TA-1054 using Tapatalk
I tried sideload the latest build(4_15C) via adb but it got stuck at ~47%, I think it can't write on the flash storage
if it take 47% flash, than u can flash it through official ost tool
Sent from my TA-1054 using Tapatalk
---------- Post added at 06:21 AM ---------- Previous post was at 06:20 AM ----------
faulty emmc device wont take flash at all
Sent from my TA-1054 using Tapatalk
Same problem bro...tried ost tool but it stucked at some point ....did u get any solution...
---------- Post added at 07:36 PM ---------- Previous post was at 07:20 PM ----------
How can i confirm if it s faulty motherboard....ost is detecting my phone...
did u used official ost tool or cracked version.. cracked one cant flash locked devices... i am talking about official tool... try with that... when try to flash official tool, select normal download mode, clear user data, clear error data on ost tool than flash.
Sent from my TA-1054 using Tapatalk
Its cracked
juwelrana091 said:
if it take 47% flash, than u can flash it through official ost tool
Sent from my TA-1054 using Tapatalk
---------- Post added at 06:21 AM ---------- Previous post was at 06:20 AM ----------
faulty emmc device wont take flash at all
Sent from my TA-1054 using Tapatalk
Click to expand...
Click to collapse
juwelrana091 said:
did u used official ost tool or cracked version.. cracked one cant flash locked devices... i am talking about official tool... try with that... when try to flash official tool, select normal download mode, clear user data, clear error data on ost tool than flash.
Sent from my TA-1054 using Tapatalk
Click to expand...
Click to collapse
Yep bro..Its a cracked version ...where can i get the official version..i have no clue
cracked wont flash locked device... u may go nokia care or any local service center who have the tool
Sent from my TA-1054 using Tapatalk
?
juwelrana091 said:
cracked wont flash locked device... u may go nokia care or any local service center who have the tool
Sent from my TA-1054 using Tapatalk
Click to expand...
Click to collapse
I tried that too...service centre said motherboard is damaged.. ..how to confirm that..i m not sure
may i try? i dont know is it against xda rule? i already warned
Sent from my TA-1054 using Tapatalk
?
juwelrana091 said:
may i try? i dont know is it against xda rule? i already warned
Sent from my TA-1054 using Tapatalk
Click to expand...
Click to collapse
Sure bro..bt i m new to xda..dont know the protocols
if nokia service center said its motherboard fault... i guess its fault... show the device to ur local service center... tell them try to flash through edl mode... ost emergency flash mode select and flash the device.... choose oreo firmware for flash
Sent from my TA-1054 using Tapatalk
Ok
juwelrana091 said:
if nokia service center said its motherboard fault... i guess its fault... show the device to ur local service center... tell them try to flash through edl mode... ost emergency flash mode select and flash the device.... choose oreo firmware for flash
Sent from my TA-1054 using Tapatalk
Click to expand...
Click to collapse
Thanks Let me try bro
I heard there's a way to repartition and flash the stock rom using EDL mode, can anyone explain it to me in detail? I wanna give it a try
u just unlock ur device than flash any rom.... i guess its more easier than edl flash.... coz disassemble the device and short motherboard is risky way for display and motherboard
Sent from my TA-1054 using Tapatalk
---------- Post added at 08:47 AM ---------- Previous post was at 08:46 AM ----------
john2518 said:
I heard there's a way to repartition and flash the stock rom using EDL mode, can anyone explain it to me in detail? I wanna give it a try
Click to expand...
Click to collapse
juwelrana091 said:
u just unlock ur device than flash any rom u want.... i guess its more easier than edl flash.... coz disassemble the device and short motherboard is risky way for display and motherboard
Sent from my TA-1054 using Tapatalk
Click to expand...
Click to collapse
Sent from my TA-1054 using Tapatalk
juwelrana091 said:
u just unlock ur device than flash any rom.... i guess its more easier than edl flash.... coz disassemble the device and short motherboard is risky way for display and motherboard
Click to expand...
Click to collapse
How can I unlock my device if it can't be downgraded to oreo/can't be flashed in "normal download mode"? isn't it?
Stuck
juwelrana091 said:
if nokia service center said its motherboard fault... i guess its fault... show the device to ur local service center... tell them try to flash through edl mode... ost emergency flash mode select and flash the device.... choose oreo firmware for flash
Sent from my TA-1054 using Tapatalk
Click to expand...
Click to collapse
Ost tool stuck at reflash service bootloader..what does that mean????!!
maybe u using cracked version.... if u tried to flash with edl mode... only select ost 6.0.4 tool and oreo firmware... if locked device than ost official tool with AC choose for flash
Sent from my TA-1054 using Tapatalk
Thanks
juwelrana091 said:
maybe u using cracked version.... if u tried to flash with edl mode... only select ost 6.0.4 tool and oreo firmware... if locked device than ost official tool with AC choose for flash
Sent from my TA-1054 using Tapatalk
Click to expand...
Click to collapse
I will try to convince the service centre guy ...??