Related
Hi all,
New user here, not much experience rooting or messing with firmware for phones. I was following the guide on how to flash the SM-935U firmware to the verizon model of the Galaxy S7 Edge, and may have bricked my phone. Here's what I did.
Followed the guide to the letter.
Powered off phone, booted to Download mode
Fired up Odin, selected the SM-935U firmware files, and clicked start.
It gave me an Auth error, which research revealed means that I forgot to turn off Reactivation Lock. I figured, "Fine, I'll just disable it. However, I can't get the phone to boot again. Every time I leave download mode, it boots into Android Recovery, where, no matter what I do, it just reboots into Android Recovery. I can't Wipe anything because it can't mount /system - probably due to Reactivation Lock?
I've been research and researching ways around this, and everything I find just points back to flashing it with the stock firmware. But then I read that you can't even do that if Reactivation lock is on, because Odin will still fail with the Auth error. So, I can only get it to boot to recovery mode, and I can't flash it with anything?
I did read somewhere that if I choose to wipe the phone's EFS with Odin that it should override activation lock, but then it clears the phones IMEI, which is an even bigger mess, isn't it?
I feel like I have to be missing something... since it never did the wipe, why is it that I can't get past the recovery mode. Shouldn't I still be able to get into the system somehow?
Does Anyone have any thoughts or suggestions for me? I'd really like to not be stuck with a permanently bricked S7 edge if at all possible....
Solved
Just wanted to post this to help anyone else who might have this issue. Turns out that you can flash the stock firmware, as long as you're flashing at least the same version or newer of the stock firmware as what the phone was running prior to getting stuck in recovery mode. It shows you what version it was running in the recovery mode at the top.
So for me, I googled the exact firmware version that recovery mode said the phone was running, downloaded it, flashed it with ODIN, and it worked just fine. Had to choose to wipe with the recovery mode after I flashed it, but then it booted like normal. - Then I enabled OEM unlocking under the developer menu, and tried flashing the U firmware again with ODIN, and it still failed with the auth error. Huh.
Turns out (maybe I wasn't doing it right or something) that you can't flash older versions of the firmware to the phone. But, as long as OEM unlocking is enabled, you can flash the U (unlocked) version of the current firmware to the phone and it will take just fine. Hint: I was able to determine the "version" number by looking at the last 4-5 characters of the build number... the verizon version I was running for my SM-935V was: VZW-G935VVRU4API3 - So I googled the API3 firmware and found the U (unlocked) version for my carrier (I happen to be using T-Mobile) on this site: https://samsung-firmware.org/model/SM-G935U/ and found the zip file name which was TMB-G935UUEU4API3-20161011161050.zip, googled that, got the rapidgator link, downloaded it, and that flashed just fine to the phone, and now my T-Mobile SIM works perfectly in what was previously the SM-935V, which now identifies as an SM-935U in settings. It's beautiful.
Also, you need the PIT file, but I was able to use the PIT file for the phone model number (again, found at the top of the android recovery menu), which for my phone was: HERO2QLTE_USA_VZW.pit (googled that and got it off androidfilehost) - I was able to use that PIT file for the T-Mobile U version of the firmware and it worked just fine.
Hope this helps someone.
Hello, All!
I have a G930V (Verizon S7) Non-EDGE, and I wan't to convert it to a G930U Unbranded (Or at least bloat free).
## BY THE WAY ##
Yes, I have seen other threads on this topic. Doesn't answer my confusions though.
Threads by:
tvm2487 (G930U Firmware)
James.Markham0757 (Can someone send me in the right direction...)
DeathAngel66669 (Using SamFirm to download SM-G930U-G930UUEU2APG9...)
## BY THE WAY ##
So anyways here are my questions.
##
1. Looking through Sammobile or Updato I see that a the newest version is
(G930UUEU2APEH) on (XAA), Would that work for the VZW Variant if not, What can i use?
2. Regarding my phone's below details would i be able to convert it to any of the 'U' Firmwares?
3. I don't wan't to trip any security features or mess with KNOX, really don't want to root.
Really just wan't to keep my warranty. Granted I will probably lose that by not using VZW firmware.
4. I thought flashing firmwares not similar to your phone will brick it permenantly. Why does the 'U' firmware run on the 'V'?
5. If i can flash the firmware (Odin?), What should i tick in the boxes for it to flash perfectly fine without errors?
Given this would be my first Samsung Tweaking.
6. Besides the Verizon bloat, What other cons are in the 'U' firmware that I should know about before doing the procedure?
7. Chances of bricking the phone? Would it be reversible?
##
My current S7 VZW Details:
Model: SM-G930V
Ver: 6.0.1
Patch Level: October, 1, 2016
Baseband Ver: G930VVRU4API3
I appreciate the help and your time. Thanks !
1. Looking through Sammobile or Updato I see that a the newest version is
(G930UUEU2APEH) on (XAA), Would that work for the VZW Variant if not, What can i use?
I don’t think it would flash as it is bootloader 2(5th character from right) latest firmware is 4!
2. Regarding my phone's below details would i be able to convert it to any of the 'U' Firmwares?
From what I understand all the USA variants of the Galaxy S7's are the same hardware
3. I don't wan't to trip any security features or mess with KNOX, really don't want to root.
Really just wan't to keep my warranty. Granted I will probably lose that by not using VZW firmware.
I have an AT&T branded S7 SM-G930A and have flashed the U firmware and used it for a while. I have now switched carriers to T-Mobile used the U firmware without issues and now flashed the T-Mobile firmware and it works fine. KNOW IS NOT TRIPPED.
4. I thought flashing firmwares not similar to your phone will brick it permenantly. Why does the 'U' firmware run on the 'V'?
Not sure, Odin may just fail to complete install?
5. If i can flash the firmware (Odin?), What should i tick in the boxes for it to flash perfectly fine without errors?
Given this would be my first Samsung Tweaking.
I never had luck flashing the HOME-CSC file, had to use straight CSC.
6. Besides the Verizon bloat, What other cons are in the 'U' firmware that I should know about before doing the procedure?
One thing I did notice is the visual voicemail app tends to work better when using the specific carrier firmware(both AT&T & T-Mobile).
I'm using T-Mobile and I don't see a need to go back to U at this time as their is not much bloat on the T-Mobile firmware.
7. Chances of bricking the phone? Would it be reversible?
##
I just installed T-Mobile Nougat on my phone and got the error on phone and it was stuck on “You will need to use Smart Switch Recovery” to fix phone! SCARY!!! I managed to finally get firmware installed and running!
Understood.
When I get home today I'll try to install a newer version from SamMobile.
Updato has older versions. Sammobile has the latest which is.
G930U with code (VZW) on
G930UOYM4APL2
(https://www.sammobile.com/firmwares/download/118975/G930UUEU4APL2_G930UOYM4APL2_VZW/)
Would this be compatible?
G930UUEU4APL2 is the latest U-firmware. Everything flashes correctly, it won't trip KNOX, and it is super easy to go back to G930V firmware if you decide you want to send it back for warranty. You can't brick the phone by flashing signed files with Odin. The bootloader won't allow Odin to flash anything that could brick it.
I had already started replying before you posted above me. I'd recommend using my link to the firmware, as Sammobile downloads take FOREVER.
I see, I'm glad.
So, What would i need to make sure to do and not do in Odin 3.11.1?
AP/BL/CP/CSC from your zip? Just flash everything or only certain things?
Re-partition tick box? yes or no?
Flash all four of those files and DON'T CHANGE ANY Odin settings.
Okay. I just flashed it and now my phone repeatedly keeps booting into recovery.
The recovery logs and the red text at the bottom says:
dm-verity verification failed
Need to check DRK first...
Any ideas?
##PREVIOUS##
I think it might have to be because I used HOME_CSC rather than CSC.
What's the difference between both? Can i revert later?
##PREVIOUS##
@CVertigo1
I reflashed with the CSC file rather than the HOME_CSC file as according to your instructions in your thread (Latest G930U Firmware) and it worked perfectly fine!
KNOX is still at 0x0 and warranty void is fine.
( https://forum.xda-developers.com/verizon-galaxy-s7/how-to/g930u-firmware-pl2-g930v-success-t3558214 )
No bloat, amazingly fast, and some features i like are present. I'll report back to your thread on the battery life when i get more time with it.
I appreciate your patience.
(Will post screenshots later).
Home_CSC doesn't wipe user data, which causes issues when swapping firmware. That's what caused your bootloop.
Followed this, today, was sick and tired of the damn Verizon bloat slowing the phone down.
The phone runs faster - notably faster.
After installing the SIM, the phone returns, "Your device will restart to configure features supported by the new SIM card."
And then" It's useless. If I hard-power reset it, and take out the SIM, it's viable - it's just useless otherwise.
Phone is a G930V, flashed to G930U.
Any Suggestions? The phone is *NOT* rooted, so I can't easily take out or rename the AutoPreconfig.apk package.. Argh.
Will I get the android nougat update on this ROM?
Just converted G930V to G930U, all 100% working here in the UK. Fully debranded and no verizon warning about sim change. perfect
Mind telling me what thread you used to find the latest firmware? This forum for the phone is so rarely used anymore, it's hard to tell what info to go even go on anymore.
Is PL2 the latest for 930U? I'm VZW but US, not UK
Hi All.
Thank you for any help you might give me in advance with this issue...
Last week, I tried to root the phone with the SM-G930P CF-Autoroot heroqltespr files with Odin found in this forum. I have rooted a few other phones but am no expert. The root after a few attempts failed (verified a few ways), however, some files must have been affected because the phone "identifies" as heroqltespr. Identifies as when I could plug into my PC heroqltespr would be the name. It was not set this way in the obvious name your device areas. I ended up doing a hard reset to clear the phone and other than the ghost naming everything was working fine.
A day or 2 ago Sprint rolled out a new OTA update which the phone installed. Since then the phone was draining battery life. After uninstalling and reinstalling the SD card today, it seems to have tripped a "Security Notice: Unauthorized Actions". That is when the trouble started. The phone started running hot, basically leaking battery power, and was all lagging. I'm assuming the CPU going Ludicrous speed.
Now, I am in a Samsung Splash screen loop, or or a recovery loop. The only thing it does is go into download mode.
I have tried flashing stock firmware, it fails. I've tried flashing with and without the SD or Sim card. Not really sure what I should be doing. The "P" version of my phone seems to be the bastard child of S7s. Any help you guys cold give me would be great. THANK YOU!
The Download Screen Reads:
Odin Mode (High Speed)
Current Binary: Samsung Official
System Status: Custom
FAP Lock: Off
Warranty Void: 8x8
Qualcomm Secure Boot: Enabled
AP SWREV: 85(2,1,1,1,1) K1 S4
I get this error when I try to flash back to stock SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4
Stupid question but is your phone in a case?
Sw rev check fail : [aboot]fused 5 > binary 4
freakboysays said:
Stupid question but is your phone in a case?
Click to expand...
Click to collapse
No it isn't.
I get this error message on the download screen. SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4
I fixed it.
5 > BINARY 4 error, has to do with a Version 5 bootloader Sprint came out with in 2018. The fact that this is only affected by the SM-G390P further complicates things for the average user. Users on version 5 bootloader will need to wait until/If a version 5 universal bootloader for the SM-G930U to get unbloated firmware. Information on restoring your S7 SM-G930P to where you left off before you started trying to root your phone can be found below. More info on Sprint F'n us and BL Version 5 can be found here
https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/. There was a post on XDA (which I can't find) which gave the idea that Sprint came out with this version 5 bootloader to prevent people from flashing the phones to the U version and going overseas with them.
The stock files for the first version of Sprint Version 5 bootloader firmware dated 1-1-18 can be found here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930P/SPR/download/G930PVPS5BRA1/206876/
Unzip. Only have auto reboot and Re-partition checked as options in Odin.
If you dont mind me asking, did you ever find a way to root the G930P with the 5th bootloader updates? Is it even possible at this point in time? Im new when it comes to rooting but with the amount of time Ive spent browsing the web it seems as if there is nothing. Thanks.
tonysak said:
I fixed it.
5 > BINARY 4 error, has to do with a Version 5 bootloader Sprint came out with in 2018. The fact that this is only affected by the SM-G390P further complicates things for the average user. Users on version 5 bootloader will need to wait until/If a version 5 universal bootloader for the SM-G930U to get unbloated firmware. Information on restoring your S7 SM-G930P to where you left off before you started trying to root your phone can be found below. More info on Sprint F'n us and BL Version 5 can be found here
https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/. There was a post on XDA (which I can't find) which gave the idea that Sprint came out with this version 5 bootloader to prevent people from flashing the phones to the U version and going overseas with them.
The stock files for the first version of Sprint Version 5 bootloader firmware dated 1-1-18 can be found here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930P/SPR/download/G930PVPS5BRA1/206876/
Unzip. Only have auto reboot and Re-partition checked as options in Odin.
Click to expand...
Click to collapse
I got screwed by this, I accidentally installed the P firmware, and now I cannot load U firmware because of this 5 > 4 error. I went to the blog you posted (arencambre), and I am only able to install the U firmware modem (CP package in Odin), everything else has to be P. And because of the P firmware, I am unable to edit APN settings to enable my native Hotspot. Is there anything I can do, besides wait for U firmware to come out with a Version 5 bootloader?
Chanman said:
I got screwed by this, I accidentally installed the P firmware, and now I cannot load U firmware because of this 5 > 4 error. I went to the blog you posted (arencambre), and I am only able to install the U firmware modem (CP package in Odin), everything else has to be P. And because of the P firmware, I am unable to edit APN settings to enable my native Hotspot. Is there anything I can do, besides wait for U firmware to come out with a Version 5 bootloader?
Click to expand...
Click to collapse
EDIT: Nevermind...sounds like you aren't on sprint.
lvpre said:
EDIT: Nevermind...sounds like you aren't on sprint.
Click to expand...
Click to collapse
Actually, I am on Sprint, and your directions were awesome, thank you so much! The only thing I had to do was change the line to:
settings put global tether_dun_apn "APNDUN,n.ispsn,,,,,,http://mms.sprintpcs.com,68.28.31.7,80,310,120,,default,dun,mms,supl"
I'm going to put a link to the thread so others can refer to it. https://forum.xda-developers.com/sprint-s7-edge/how-to/hotspot-bypass-nougat-ok-t3563446
Hi all,
EDIT: I posted this in another thread that was about two years old, where I followed the instructions that caused this: https://forum.xda-developers.com/sp...msung-galaxy-s7-sm-g930p-root-xposed-t3503599
That thread seems dead-ish and if you managed to fix this issue maybe you can help me also. Also what was lvpre's original post before he edited it, and would it apply here?
So the worst has happened - got a new (used) phone from Boost Mobile, tried this guide, and now I can only boot to the "An error has occured while updating the device software. Use the Emergency Recovery function in the Smart Switch PC software." screen. Sometimes it does take me to the original "Download mode" screen.
Now, I should be able to resolve this by flashing the original firmware correct? (As in, the firmware that was installed when it came)? Or does it just need to be firmware from the same date range that has the same bootloader? ODIN will still let me attempt flashing on this screen, but I still get the same error when I try again, which on the Download mode screen showed "SW REV CHECK FAIL : [system]Fused 4 > Binary 1"
Any advice here? My S6 bricked when somehow OEM unlock enabled itself and I can't get around the FRP lock, I will be VERY annoyed if the same thing happens with a NEW phone. If I can't fix this I am never buying Samsung again. Any advice on this is very welcome! I emailed Boost to ask them which firmware is installed (because I'm an idiot and didn't write it down but have never had flashing go this wrong before).
EDIT: Booting to recovery just shows a blue "RECOVERY BOOTING...." for a second in the corner and gives a recovery bootloop, just keeps flashing that.
EDIT: I apparently tried to flash an earlier bootloader/etc through ODIN according to the directions in the post I linked above, and after that I now have this problem. Nobody else in the thread seems to have had this problem, and your post is the closest to anything I can find on this issue. I would be in your eternal debt if you could help me out here.
PLEASE HELP!
EDIT: Theoretically if I can find the original firmware it was on I should be fine, right? Everywhere I read if flashing goes wrong you just flash the original stock on it. I guess worst case scenario I download gigs upon gigs of firmwares for Sprint 930P over the last year and find the one that sticks? Or is the fact my recovery is bootlooping and I can only go into download mode mean I'm bricked?
Hello all,
To follow up on my last post, I found success restoring to stock via this firmware:
G930PVPU4BQH1_G930PSPT4BQH1_SPR_7.0.zip
https://www.androidfilehost.com/?fid=817550096634799807
I left my original post just in case anyone messes this up the way I did. I still need root, but now I know how to reset to stock in the event this happens again.
For the record I bought a used Samsung Galaxy S7 off the Boost website.
IF YOU FOLLOW THIS GUIDE, OR ANY, MAKE SURE TO GO INTO "SETTINGS -> ABOUT PHONE" AND MARK DOWN WHAT FIRMWARE THE PHONE IS CURRENTLY ON AS STOCK. THIS WILL SAVE YOU A HEADACHE TRYING TO FIGURE OUT WHICH FIRMWARE YOU NEED TO DOWNLOAD IF THINGS GO WRONG. DO NOT PAY FOR A FIRMWARE DOWNLOAD OR USE FILESHARE SITES, GO HERE: https://simunlockremote.com/galaxy-s-series-firmware/ AND FIND THE VERSION YOU ARE ON AND IT WILL DIRECT YOU TO A FAST GOOGLE DRIVE LINK.
Thanks to all the hard work all the devs have done that have gotten use. I still need root soooooooooo if anyone knows how to do that let me know!
CHEERS! I am so happy right now
slvmecha said:
Hello all,
To follow up on my last post, I found success restoring to stock via this firmware:
G930PVPU4BQH1_G930PSPT4BQH1_SPR_7.0.zip
https://www.androidfilehost.com/?fid=817550096634799807
I left my original post just in case anyone messes this up the way I did. I still need root, but now I know how to reset to stock in the event this happens again.
For the record I bought a used Samsung Galaxy S7 off the Boost website.
IF YOU FOLLOW THIS GUIDE, OR ANY, MAKE SURE TO GO INTO "SETTINGS -> ABOUT PHONE" AND MARK DOWN WHAT FIRMWARE THE PHONE IS CURRENTLY ON AS STOCK. THIS WILL SAVE YOU A HEADACHE TRYING TO FIGURE OUT WHICH FIRMWARE YOU NEED TO DOWNLOAD IF THINGS GO WRONG. DO NOT PAY FOR A FIRMWARE DOWNLOAD OR USE FILESHARE SITES, GO HERE: https://simunlockremote.com/galaxy-s-series-firmware/ AND FIND THE VERSION YOU ARE ON AND IT WILL DIRECT YOU TO A FAST GOOGLE DRIVE LINK.
Thanks to all the hard work all the devs have done that have gotten use. I still need root soooooooooo if anyone knows how to do that let me know!
CHEERS! I am so happy right now
Click to expand...
Click to collapse
Don't take any updates. My edited post was on how to get hotspot working. There is a thread here about it, but I changed a line of code.
Switched from Sprint to T-Mobile. Am I out of luck?
lvpre said:
Don't take any updates. My edited post was on how to get hotspot working. There is a thread here about it, but I changed a line of code.
Click to expand...
Click to collapse
I've got a Galaxy S7 G930P from Sprint. I just switched to T-Mobile a couple months ago and brought my S7 phone with me. I was hoping to flash my rom to either the G930U or the G930T (T-Mobile) version, but both are still bootloader v4 and I hit the same error that everyone else on this thread was hitting.
My main problem is that my S7 phone can't send/receive MMS messages on T-Mobile, even after updating the APN settings, and, even worse for me personally - my phone gets below average reception everywhere I go, presumably because my Sprint G930P rom has locked down some of the bands that T-Mobile uses.
Aside from getting a new phone, do I have any options? Or am I stuck waiting for either a G930T or a G930U update based on bootloader 5?
jbuck2 said:
I've got a Galaxy S7 G930P from Sprint. I just switched to T-Mobile a couple months ago and brought my S7 phone with me. I was hoping to flash my rom to either the G930U or the G930T (T-Mobile) version, but both are still bootloader v4 and I hit the same error that everyone else on this thread was hitting.
My main problem is that my S7 phone can't send/receive MMS messages on T-Mobile, even after updating the APN settings, and, even worse for me personally - my phone gets below average reception everywhere I go, presumably because my Sprint G930P rom has locked down some of the bands that T-Mobile uses.
Aside from getting a new phone, do I have any options? Or am I stuck waiting for either a G930T or a G930U update based on bootloader 5?
Click to expand...
Click to collapse
If your phone is uicc [sim] unlocked from sprint... you can try the following.
1. Odin a dec/Jan firmware...like QJ3. But replace the cp slot with the file from the latest u firmware. This is the modem file.
2. When your phone starts, you will receive a pop up message, just hit cancel.
3. Install a package disabler like sabs, bk, adhell2. Disable securitylogagent . This should remove the annoying message. Sabs takes a little effort to setup, but you may need it for the disabler part. Restart after disabling.
4. Pop in sim. See if the additional bands are unlocked.
If you fail, you can always just odin back to a v5 sprint firmware. But don't try it unless you are stuck on the current firmware and your phone is doing nothing. It won't brick your phone.
While the firmware is not downloadable, modem files can downgrade one major update.
This worked for me, but I only have sprint and haven't tried it elsewhere.
Here is an article https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/
Is this triggers the knox counter ?
I have an s7 edge that my buddy gave me, saying it stopped working after he tried to downgrade the OS or something, now the phone only boots to Factory Binary. On the back of the phone, it says it is a G935v, however, in the factory binary, it lists the model as G935a. So which firmware do I use to fix it? And if you could, how would I go about getting the phone to boot normally instead of in factory binary?
When booting into factory binary, the PDA is FA60_G945AUCU5ARA2, the model is SAMSUNG-SM-G935A [SS], and the Phone is G935VVRU4BQH4. To my knowledge these are listing as 2 different models. Also I tried to flash the official firmware from Sammobile, and I got errors like [aboot] Fused 5 > Binary 4, etc, every time.
I would really like to get this phone working. Thanks in advance!
Bump
If I remember correctly you can flash AT&T firmware on a Verizon. Not so sure about vice-versa. As for the errors in Download Mode, make sure you're not downgrading (e.g from 7.0 to 6.0)
And I think your phone was sold by Verizon and its firmware was changed to AT&T
Also, I found this
That is not good news.
Each time VZ updates their software for these phones, they update a value in a fuse.
That started as 1 with MDK, went to 2 with ME7, 3 with MI1, and 4 with MJ7. At least that's what I think the revisions did to the qfuse.
So it's seeing that you're trying to flash a binary with revision 3 (BINARY:3) but it remembers a flash with revision 5.
Now, there's nothing out there that I know of for the i545 that's rev 5 - the next update after MJ7 will be rev 5. So, your phone is probably not going to be recoverable until VZ and Samsung release another software update for the I545. Something corrupted the fuse storing the update level.
You can verify this by flashing MJ7 - it'll probably say FUSED:5, BINARY: 4.
Sorry for the bad news.
Click to expand...
Click to collapse
That was for a SGS4, so I guess the same applies today.
Im assuming the A following the 935 stands for AT&T, and the V would stand for Verizon. So according to what you quoted, I'm trying to "downgrade", and the OS wont allow it? Or am I misunderstanding?
Also for what it's worth, in recovery mode it says 6.0.1 is the current firmware, but again it is listing itself as 935A, and I can't get it to boot properly, it only goes to a "factory binary".
Yes. That's about it. Try flashing a Nougat or Oreo firmware.
Or
Try flashing a combination file and then an ordinary firmware
Sent from my SM-G935FD using Tapatalk
im having almost the same issue except it is saying Fused 8 binary 4. it is also a Verizon phone for sure. Everytime I look to find the exact firmware for nougat because I want to downgrade to get away from this stupid security update it keeps failing. any ideas?
codeb12 said:
im having almost the same issue except it is saying Fused 8 binary 4. it is also a Verizon phone for sure. Everytime I look to find the exact firmware for nougat because I want to downgrade to get away from this stupid security update it keeps failing. any ideas?
Click to expand...
Click to collapse
Check in the verizon section?
I have a TracFone S8+. I recently flashed it with the Verizon combination and stock firmware. Now, whenever I'm trying to flash it to anything, I either
get stuck at SetupConnection for a while before getting "All threads completed success 0 / failed 1", or
get the Complete(Write) error
I tried the method where I click the start button before immediately entering download mode. That did nothing. I also tried flashing it again with both Verizon and Tracfone files. Neither succeeded. I used different versions of Odin, as well as the Prince and the new patched editions. My phone is working fine, but I'm worried that problems may arise by not having the original carrier's firmware, esp. when I still have TracFone as my carrier.
gladiatorland said:
I have a TracFone S8+. I recently flashed it with the Verizon combination and stock firmware. Now, whenever I'm trying to flash it to anything, I either
get stuck at SetupConnection for a while before getting "All threads completed success 0 / failed 1", or
get the Complete(Write) error
I tried the method where I click the start button before immediately entering download mode. That did nothing. I also tried flashing it again with both Verizon and Tracfone files. Neither succeeded. I used different versions of Odin, as well as the Prince and the new patched editions. My phone is working fine, but I'm worried that problems may arise by not having the original carrier's firmware, esp. when I still have TracFone as my carrier.
Click to expand...
Click to collapse
Nothing bad should happen service wise. A lot of tracphone uses Verizon towers. As long as you download the TracFone apps.
Ok first off.
The combination is a multi carrier firmware. It is test firmware from Samsung not the carrier. So when you flashed that and then switched to Verizon that set Verizon as the CSC.
What you are looking for is a TracFone CSC from your current firmware version 5th digit back from far end is a 1 through 5. That determines the revision. This could cause a Odin failure. If it's lower than current.
So now that's some what explained.
If you can find that revision of firmware's CSC file you can flash that in Odin with your tracfones sim installed and it should revert back to TracFone if you think it's nessicary. If your on the newer 8.0 firmwares you need that modded Odin 3.12b I think. Those firmware are in a different file type. Not .tar files. So that will cause a fail too.
I'm always around if all those check out we can go from there:good:
There is also a dialer code to select csc but I think hidden menus are disabled on Verizon.
Lss all the firmwares are identical for all the us models. They all have identical hardware.
Pretty much what determines anything is the csc file
Thank you for your help! It's invaluable.
Okay, so I found Verizon's firmware to be G955UOYN2CRB9. However, Tracfone's is G955USQU5CRL2. If the number before the C is indeed the bootloader version, then that means I'm trying to upgrade from 2 to 5. Is that possible?
gladiatorland said:
Thank you for your help! It's invaluable.
Okay, so I found Verizon's firmware to be G955UOYN2CRB9. However, Tracfone's is G955USQU5CRL2. If the number before the C is indeed the bootloader version, then that means I'm trying to upgrade from 2 to 5. Is that possible?
Click to expand...
Click to collapse
Yes. You just can't go back to the revision 2 firmware after. You can upgrade just not downgrade
TheMadScientist said:
Yes. You just can't go back to the revision 2 firmware after. You can upgrade just not downgrade
Click to expand...
Click to collapse
Okay, now I'm seriously boggled. When I go to Software Update section in settings, it tells me that the current version is indeed G955USQU5CRL2/G955UOYN5CRL2/G955USQU5CRL2. Even though the last successful flash was Verizon. Do you know what could've happened here!? And why I still get an error when I flash the phone with TracFone firmware?
I have a Verizon phone with Verizon firmware and the 5th digit from the right is a 5. It appears you have Verizon firmware flashed on your phone
Sent from my SM-G950U using Tapatalk
djm1947 said:
I have a Verizon phone with Verizon firmware and the 5th digit from the right is a 5. It appears you have Verizon firmware flashed on your phone
Sent from my SM-G950U using Tapatalk
Click to expand...
Click to collapse
Interesting. When I visited SamMobile's page for G955U, I found that PDA associated with TracFone as well.