Hello guys my OPT got bricked and i cannot find ways to unbrick it. I have tried MSM8994DownloadTool but it gives some error in red i waited for a long time but it was stuck so i tried the qfil method but it says
" COM Port number:5
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail
Finish Download "
Are there any other ways to unbrick OPT?
Are you using the official usb cable? I tried it with a usb micro cable and a micro to c adapter on it, that didn't work, but the official cable did the job.
FPSUsername said:
Are you using the official usb cable? I tried it with a usb micro cable and a micro to c adapter on it, that didn't work, but the official cable did the job.
Click to expand...
Click to collapse
yes i did try but it didnt work, do you know any other methods?
phorcus said:
yes i did try but it didnt work, do you know any other methods?
Click to expand...
Click to collapse
Try this step: How to Make the device show as Qualcomm 9008
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
and use method 1.
If you flashed H2OS modem and stuff, use H2OS instead of OOS
FPSUsername said:
Try this step: How to Make the device show as Qualcomm 9008
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
and use method 1.
If you flashed H2OS modem and stuff, use H2OS instead of OOS
Click to expand...
Click to collapse
I tried all the methods bro but it doesnt work, isnt there any method that i can flash these files manually?
phorcus said:
I tried all the methods bro but it doesnt work, isnt there any method that i can flash these files manually?
Click to expand...
Click to collapse
Try an other usb port or pc
Sent from my oneplus2 using Tapatalk
Related
I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me
follow the instructions on my thread
http://forum.xda-developers.com/showthread.php?t=2568853
if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager
thanks your help but it not work
thanks your help but it not work, :crying: i tried kies, it also not work
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
Are you boot into download mode already? If not , odin will not recognize your phone anyway
install samsung usb driver first n then connect your phone with download mode by usb
Note:make sure that usb driver is install properly before connect ur phone
.
marcussmith2626 said:
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
Click to expand...
Click to collapse
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
!!
GalKill said:
Are you boot into download mode already? If not , odin will not recognize your phone anyway
Click to expand...
Click to collapse
of course
@@
before that, i installed ROM cm7.2 with Kernel [email protected]#2. but it fail and can't boot. recovery also no
gemnett said:
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
Click to expand...
Click to collapse
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
marcussmith2626 said:
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
Click to expand...
Click to collapse
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
gemnett said:
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
Click to expand...
Click to collapse
right click the device
click uninstall
restart the pc
then put phone into download mode
connect usb
push vol up on phone to start connection
drivers should then install
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
DiwatangTboom said:
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
Click to expand...
Click to collapse
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
gemnett said:
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
Click to expand...
Click to collapse
Yep.
Helo, I can now get on my LG G2 into the downloadmode but i cant flash nothing via flash tool, i cant nothing do, There is no connection between PC and G2. How can i fix that??
someone can help???
rafaelblacha89 said:
Helo, I can now get on my LG G2 into the downloadmode but i cant flash nothing via flash tool, i cant nothing do, There is no connection between PC and G2. How can i fix that??
someone can help???
Click to expand...
Click to collapse
Almost the same boat...
I'm in download mode, recognized by pc, but cant flash with LG Flash Tool, before hits 16% gives me error of partition and LFA error...
How can i fix this....
Cable, drivers, usb port...
_____________________________________Read more write less and be smart
siggey said:
Cable, drivers, usb port...
_____________________________________Read more write less and be smart
Click to expand...
Click to collapse
I read and a lot for the same reason your telling me.....
And i already check cable, USB ports and drivers and nothing still having the same error when flashing, data user moved partition and LAF image error...
My Note 4 is n910cq with Exynos and I downloaded Android 6 from an xda thread and while I try to flash it through odin I got an error. After that the phone stuck with a screen says"firmware upgrade encountered an issue please select recovery mode ın kies and try again". I can put the phone into download mode but not able to get it to recovery mode. I tried to flash older roms but still keep getting error in odin. I tried Samsung smart switch app through upgrade section but no result. So, what to do?
it happens to me also because the phone disconnects while flashing , so you need to change the usb port ..keep trying to place it in a different usb port or even try to change the usb cable
tareqjordan said:
it happens to me also because the phone disconnects while flashing , so you need to change the usb port ..keep trying to place it in a different usb port or even try to change the usb cable
Click to expand...
Click to collapse
Thanks a lot. I changed the cable and PC and works good.
Hi everyone.
My OnePlus 6T (A6010 version) froze today and it has been rebooting in loop since that. I tried a factory reset, nothing changed, always freezes on the loading "dots" logo then auto-reboot.
I'm on stock firmware and didn't root the phone. Everything is as it came from the box.
What can i do except send it back to the vendor ?
Flash it back to the stone age with this:
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Frankenscript said:
Flash it back to the stone age with this:
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Click to expand...
Click to collapse
thx
the phone is not recognized by the computer as a COM port with the qualcomm drivers :/
OnePlus Support took control of my computer to update themselves the ROM but as the phone can't get recognized they are not able to do anything.
fremik said:
thx
the phone is not recognized by the computer as a COM port with the qualcomm drivers :/
OnePlus Support took control of my computer to update themselves the ROM but as the phone can't get recognized they are not able to do anything.
Click to expand...
Click to collapse
Enable usb debugging and download the correct Qualcomm drivers for your Windows pc
Blackblock92 said:
Enable usb debugging and download the correct Qualcomm drivers for your Windows pc
Click to expand...
Click to collapse
i cant start the phone except fastboot or recovery. How do i enable usb debugging there ?
PS: if my plug my old oneplus3T it appears with qualcomm COM port drivers.
Go to fastboot.
Try to flash a FASTBBOT rom, by mauronofrio.
So here is the sad story , was just receiving the message in viber and the phone suddenly died, tried many methods
Tried to load into recovery
Tried MSMdownloadtool
when i hold volume +and - button and power button and plug it into the PC the MSMdownload tool recognize the device and when i follow the procedure it gives message like Firehose data read error.
That's "easy" to fix, first use the original USB cable (I don't know why, but on my device the flash always fails when I use a non-original cable), try with another USB port of your pc, or try with some other Qualcomm driver.
onliner said:
That's "easy" to fix, first use the original USB cable (I don't know why, but on my device the flash always fails when I use a non-original cable), try with another USB port of your pc, or try with some other Qualcomm driver.
Click to expand...
Click to collapse
yup, Tried original USB, different port and different laptop still stuck on those error
same problem tried multiple times no luck