Database Users

Confirmed Wanam custom xposed framework working TW 5.1.1 SM-P600

Hey guys thought I'd let everyone know that Wanam's custom xposed framework for Samsung 5.1.1 firmware is working on the SM-P600.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Wanam states that CWM and deodexed ROM needed or recommended but with the testing I've done so far it's working well using TWRP and rooted stock odexed DOJ3 firmware.

marxses said:
Hey guys thought I'd let everyone know that Wanam's custom xposed framework for Samsung 5.1.1 firmware is working on the SM-P600.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Wanam states that CWM and deodexed ROM needed or recommended but with the testing I've done so far it's working well using TWRP and rooted stock odexed DOJ3 firmware.
Click to expand...
Click to collapse
Please educate on anything I might not be thinking about. I cannot make xposed framework function. stock rooted 5.1.1 SM-P600. Following everything exactly. I have DOK1.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960

I have to agree with radpp16 above, I followed the instructions but I still can't get it working. The app installed properly, I was able to boot to recovery and flashed it, but after I restarted the app was unable to detect the flashed files.
Tried both the P600UBUDOL2 and P600XXUDOJ3 firmwares and didn't work. Using TWRP 2.8.6.0 and below will cause softbrick on DOL2 firmware.

radpp16 said:
Please educate on anything I might not be thinking about. I cannot make xposed framework function. stock rooted 5.1.1 SM-P600. Following everything exactly. I have DOK1.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Click to expand...
Click to collapse
What version of xposed framework have you been trying? I am using v75.8. Maybe give that a go.
https://www.androidfilehost.com/?w=files&flid=38719
You're running a different firmware which could possibly be causing problems.... not sure if I can offer much more help. I just followed the instructions exactly and it worked.

Pact said:
I have to agree with radpp16 above, I followed the instructions but I still can't get it working. The app installed properly, I was able to boot to recovery and flashed it, but after I restarted the app was unable to detect the flashed files.
Tried both the P600UBUDOL2 and P600XXUDOJ3 firmwares and didn't work. Using TWRP 2.8.6.0 and below will cause softbrick on DOL2 firmware.
Click to expand...
Click to collapse
Try v75.8 on DOJ3 and let me know how you go.
https://www.androidfilehost.com/?w=files&flid=38719

marxses said:
Try v75.8 on DOJ3 and let me know how you go.
Click to expand...
Click to collapse
Thanks for this info, right now I'm using the tablet to do important work so I can't flash a new one, but I'll likely do it in the next 3 - 4 days.
In the meantime, just to confirm, all I need to do is get a rooted DOJ3, install the xposed app, then boot to recovery, flash that v75.8, bootup and then finish the installation in the main xposed app, yes? I'll probably use enotar's in the development section, his fourth beta that's still on the DOJ3 version. That one's pre-rooted and all so simplifies a lot of the work. His newest B5 release is using the very latest firmware that Samsung outs though I haven't been able to get xposed to work on it. So I'll just use the DOJ3 release then.
I've been flashing numerous times but can't get xposed to work with the many firmwares out there so I'm being a bit cautious lol

Pact said:
Thanks for this info, right now I'm using the tablet to do important work so I can't flash a new one, but I'll likely do it in the next 3 - 4 days.
In the meantime, just to confirm, all I need to do is get a rooted DOJ3, install the xposed app, then boot to recovery, flash that v75.8, bootup and then finish the installation in the main xposed app, yes? I'll probably use enotar's in the development section, his fourth beta that's still on the DOJ3 version. That one's pre-rooted and all so simplifies a lot of the work. His newest B5 release is using the very latest firmware that Samsung outs though I haven't been able to get xposed to work on it. So I'll just use the DOJ3 release then.
I've been flashing numerous times but can't get xposed to work with the many firmwares out there so I'm being a bit cautious lol
Click to expand...
Click to collapse
You're welcome.
Not sure what you mean by finish the installation in the main app though? The xposed framework should be installed and locked in, meaning no ability to flash or upgrade the framework within the app.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

EDIT 2: Boy, did this take a lot of derpin around, but xposed versions are rather specific to firmwares, and after a number of testing I finally found that for the fifth beta of Enotar's ROM, which is based on firmware P600UBUDOL2, the one that works is v 79.0, specifically xposed-v79.0-sdk22-arm-custom-build-by-wanam-20151217.
====================================================================
EDIT: I flashed Xluco's kernel on Enotar's B4, that somehow removed the device's root. Giving up on that firmware, I now reformat the device. flashed the fifth beta, installed the alpha 3.0 Xposed app, flashed the latest wanam xposed, v79.1, and now after rebooting the app wasn't even able to detect it.
===============================================================
Well, I flashed the lollipop firmware, installed the xposed app, boot to recovery, flashed the aforementioned xposed file and when I came back to the main app this appears.
Basically "CANNOT LINK EXECUTABLE DEPENDENCIES: library 'libdvm.so' not found"
Tried searching around, seems like the problem stems from an incorrect xposed module but I've followed the steps outlined in my previous post which mirrors marxses's suggestion. Any helping tips, eh?

Which Xposed version will work with DPC4 stock 5.1.1?

[xposed] [nougat 7.0] [note 5] [working]

Thanks to PurifyOS Team for making this.....
Link to original thread - [XPOSED] [NOUGAT] [CAN UNSTABLE] Xposed SDK25/24 for all arch
TESTED ON -:​N920CD KHONGLOI V11
**please test and report
DOWNLOAD -:​
GOOGLE DRIVE
INSTRUCTION -:​
1. Download xposed zip , Xposed installer and uninstaller (just in case)
2. Install xposed installer
3. Boot to twrp
4. Flash xposed installer and reboot
5. You will have working xposed .
I case you end up in boot loop,
1- flash uninstaller
2. boot normally
3. after booting again flash xposed installer
4. It should work now
(once happened to me but this seems to the trick)
NOTE -:​ **WORKS ONLY ON SUPERSU (for me ..... boot loop on magisk)
Magisk version is available here but not worked for me .....gives bootloop and its uninstaller does not work
SCREENSHOTS -:​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

aayush1234t6 said:
Thanks to PurifyOS Team for making this.....
Link to original thread - [XPOSED] [NOUGAT] [CAN UNSTABLE] Xposed SDK25/24 for all arch
TESTED ON -:
N920CD KHONGLOI V11
**please test and report
DOWNLOAD -:
GOOGLE DRIVE
INSTRUCTION -:
1. Download xposed zip , zposed installer and uninstaller (just in case)
2. Install xposed installer
3. Boot to twrp
4. Flash xposed installer and reboot
5. You will have working xposed .
I case you end up in boot loop,
1- flash uninstaller
2. boot normally
3. after booting again flash xposed installer
4. It should work now
(once happened to me but this seems to the trick)
NOTE -:
**WORKS ONLY ON SUPERSU (for me ..... boot loop on magisk)
Magisk version is available here but not worked for me .....gives bootloop and its uninstaller does not work
SCREENSHOTS -:





Click to expand...
Click to collapse
Nice working in N920C with khongloi V11...

Works on n920c but i have a strange message, something to do or do not need?
Wysłane z mojego SM-G950F przy użyciu Tapatalka

Kanczyn said:
Works on n920c but i have a strange message, something to do or do not need?
Wysłane z mojego SM-G950F przy użyciu Tapatalka
Click to expand...
Click to collapse
that is not a message for you....its just showing that those build are unstable .....see in the tab ' xposed status ' it will show xposed version installed......
other tabs are for updating xposed and downloading zip

RootCloak does it work for Snapchat?

dallen5 said:
RootCloak does it work for Snapchat?
Click to expand...
Click to collapse
i installed for that purpose but is does not work:crying:

aayush1234t6 said:
i installed for that purpose but is does not work:crying:
Click to expand...
Click to collapse
It's not working for me neither

Great thread aayush!
Do update us on the xposed Nougat effect.

Its working with my phone even i have magisk root , xstana app is not working ? Can someone please test it.

does it work on n9208 ?

mouad94 said:
Its working with my phone even i have magisk root , xstana app is not working ? Can someone please test it.
Click to expand...
Click to collapse
please share which zip you flashed so i can update the thread

aayush1234t6 said:
please share which zip you flashed so i can update the thread
Click to expand...
Click to collapse
I used the zip in this thread

Installed on 920T running Dr. Ketan N10 Rom. Success!!!

Works like a charm on Future Rom L5 with khongloi kernel V11... Thanks for this

N920CD khongloi11 works but instable, sometime freeze for many seconds and after automatically the phone restarts.
The same using in infinity FAN 2.1

Luca Porto said:
N920CD khongloi11 works but instable, sometime freeze for many seconds and after automatically the phone restarts.
The same using in infinity FAN 2.1
Click to expand...
Click to collapse
i never faced that issue

Work's great on my KHONGLOI V11 no troubles only one question does rootcloak work at hiding root for apps
Thanks

It works on my N920C with Magisk 13.1
Rom is Infinity F4

Any N920T users here that have luck with this?

DriftorX said:
Any N920T users here that have luck with this?
Click to expand...
Click to collapse
working fine on my 920T on big tiny rom V2. Not many modules for N though.

[ROOT] Magisk v16.0 for Zenfone2

As you may know, Zenfone2 needs a boot signature or it will stuck at bootloader.
But the Official Magisk zip doesn't have it.
Here's the patched zip for Magisk 16.0.
Changes:
Added bootloader signature.
Removed arm, arm64, chromeos files to reduce zip size.
Kept x64 files if you build a 64bit ROM for your Zenfone2, although I didn't find any.

YandexStudio said:
As you may know, Zenfone2 needs a boot signature or it will stuck at bootloader.
But the Official Magisk zip doesn't have it.
Here's the patched zip for Magisk 16.0.
Changes:
Added bootloader signature.
Removed arm, arm64, chromeos files to reduce zip size.
Kept x64 files if you build a 64bit ROM for your Zenfone2, although I didn't find any.
Click to expand...
Click to collapse
Thanks
Magisk app updated to 5.6.1 and Magisk Root to 16.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ASUS_Z00AD [MM .352] [Unlocked MaGisK]

would it work with zaa8?

mohawahba said:
would it work with zaa8?
Click to expand...
Click to collapse
Sorry I didn't have one so I didn't test yet，anyway，Magisk is using boot patch to work so if you worry it may cause any problem，just backup boot partition using twrp and then flash it，if there's any issue you can just restore back。

Hi, is there any instruction?
I'm using Resurrection Remix-N 5.8.5 with custom atom kernel. Can I just reboot to TWRP and run magisk uninstaller, and then magisk 16?
Or do I have to flash rom, google, etc again?

Is this better than flashing latest official Magisk and then flash that boot signature zip from another thread?

also work for Z008D x86..tested by me..thanks

Thank you for this.
I was stuck in TWRP after installing Magisk(w/o this patch), and was panicking. Luckily stumbled on to this thread right when I was about to call it quits. Did not know about the Boot signature verification needed for ZenFone. Initially was not sure if it would work for my phone: ZenFone 2 ZE550ML / Z008D model as you had put 'Z00A' in the file_name. But it worked! Thanks again.

not working on mine ze551ml (Z00A/Z00AD), it goes to dead android icon

Dansen48 said:
not working on mine ze551ml (Z00A/Z00AD), it goes to dead android icon
Click to expand...
Click to collapse
When? During the installation? After tried to reboot?
What ROM? What recovery (with version)? What bootloader (Loolipop or Marshmallow)?
Z00A or Z008?

Tr4sHCr4fT said:
Is this better than flashing latest official Magisk and then flash that boot signature zip from another thread?
Click to expand...
Click to collapse
Could you point to the boot signature thread?
I'd appreciate it very much.

Thanks
Magisk v16.0 in Rom Custom Mokee.

My Z00A was stuck in a bootloop after installing the official Magisk package. It kept booting into TWRP.
Your package fixed the bootloop, but I can't seem to get the SafetyNet check working.
Root access to applications work fine, but SafetyNeet is not funcitonal. Any tips on getting this to work?

Magisk is a pain in the ass... The hassle to install and etc is not worthy for such a few modules..

juliohm said:
My Z00A was stuck in a bootloop after installing the official Magisk package. It kept booting into TWRP.
Your package fixed the bootloop, but I can't seem to get the SafetyNet check working.
Root access to applications work fine, but SafetyNeet is not funcitonal. Any tips on getting this to work?
Click to expand...
Click to collapse
Have you enabled Magisk Hide in the settings?

wYoshi said:
Have you enabled Magisk Hide in the settings?
Click to expand...
Click to collapse
Yes, it's enabled for the apps I want to hide root from, but it doesn't work. Those apps still realize the phone is rooted.

wYoshi said:
When? During the installation? After tried to reboot?
What ROM? What recovery (with version)? What bootloader (Loolipop or Marshmallow)?
Z00A or Z008?
Click to expand...
Click to collapse
Marshmallow 6.0.1
Stock ROM or TWRP 3.1.1 and 3.2.1
Z00A (duh cuz its ZE551ML obviously its Z00A/Z00AD sheeesh just like i posted)
---------- Post added at 07:06 AM ---------- Previous post was at 07:05 AM ----------
wYoshi said:
Have you enabled Magisk Hide in the settings?
Click to expand...
Click to collapse
same here

Know of anything for Z00D? I know Mokee has it up on their site but i have not flashed that yet. I read above it is integrated into the rom already?

Update magisk
Please update Magisk 7.1 for Z00A .....

Please update it to 17.1
Can't install any modules on 16 anymore

Xposed Installer Z17 miniS

Anyone can install Xposed Installer on Z17 miniS???
I try install the lastest Xposed Installer on my Z17 miniS, but framework cant run
Any help,pls

I downloaded the xposed version 89 (sdk23, arm64) and the 3.1.5 framework apk. I installed the apk and then flashed the zip file via twrp and it worked
But I honestly don't know what the difference between mini and mini s is. I guess I have the normal mini (569J)

dhvminh said:
Anyone can install Xposed Installer on Z17 miniS???
I try install the lastest Xposed Installer on my Z17 miniS, but framework cant run
Any help,pls
Click to expand...
Click to collapse
Hi, which rom/firmware are you using in your zmini s ?
I use chinese rom 2.17, last one.
installed framework xposed-v89-sdk25-arm64.zip( for our phone, nougat 7.1.1 ) and xposed apk 3.15, but after reboot, xposed app crash when open.
if you have a different rom, can you try and reply? thanks
download xposed-uninstaller-20180117-arm64.zip in case your phone don't boot. it's for uninstall xposed-v89-sdk25-arm64.zip if problems.
after flash xposed-v89-sdk25-arm64.zip, it take 2-3 min to boot. loop at BE YOURSELF, don't worry

dhvminh said:
Anyone can install Xposed Installer on Z17 miniS???
I try install the lastest Xposed Installer on my Z17 miniS, but framework cant run
Any help,pls
Click to expand...
Click to collapse
I Used Chinese rom 2.17 ver and xposed 3.15 version. here's my step to opened the xposed 8.9 version:
1. you need install the 8.9 xposed framework , after reboot you may get flash (crash) and quit. (it's may take 3~5 mins to reboot)
2. you must to uninstall xposed 3.15 and reboot again.
3. after restart you should re-install xposed 3.15 ver.
4. now you can open xposed but you still can't use xposed tools because nubia UI can't allow the framework to worked.
5. you must opened setting and stop resource hook.
6. reboot and join it.
hope it's helpful to you.

spboxer3 said:
I Used Chinese rom 2.17 ver and xposed 3.15 version. here's my step to opened the xposed 8.9 version:
1. you need install the 8.9 xposed framework , after reboot you may get flash (crash) and quit. (it's may take 3~5 mins to reboot)
2. you must to uninstall xposed 3.15 and reboot again.
3. after restart you should re-install xposed 3.15 ver.
4. now you can open xposed but you still can't use xposed tools because nubia UI can't allow the framework to worked.
5. you must opened setting and stop resource hook.
6. reboot and join it.
hope it's helpful to you.
Click to expand...
Click to collapse
Thanks u for ur help.
I installed xposed already with my rom.
The rom i used is rom cook from chinese forum, based on ver 2.16
Sent from my NX589J using Tapatalk

spboxer3 said:
I Used Chinese rom 2.17 ver and xposed 3.15 version. here's my step to opened the xposed 8.9 version:
1. you need install the 8.9 xposed framework , after reboot you may get flash (crash) and quit. (it's may take 3~5 mins to reboot)
2. you must to uninstall xposed 3.15 and reboot again.
3. after restart you should re-install xposed 3.15 ver.
4. now you can open xposed but you still can't use xposed tools because nubia UI can't allow the framework to worked.
5. you must opened setting and stop resource hook.
6. reboot and join it.
hope it's helpful to you.
Click to expand...
Click to collapse
what do you mean "stop resource hook" ? thanks

Does Magisk work with the Z17 mini?

and about notifications? are you receaving correct without a launcher? facebook, whatsapp.......

diogoasisti said:
what do you mean "stop resource hook" ? thanks
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

spboxer3 said:
Click to expand...
Click to collapse
thanks for reply, after some tests, it worked, installed v 87 framework, after update from xposed app to 89 framework, now framework is Green Active. The problem now is: i'm trying to install gravitybox mod, but when i open, said me system framework stopped, exiting, and not open. Why?

Got open GravityBox disabling ressource hooks, but not change when i configure settings , statusbar, lockscreen....

diogoasisti said:
Got open GravityBox disabling ressource hooks, but not change when i configure settings , statusbar, lockscreen....
Click to expand...
Click to collapse
yes because the nubia UI system used "NubiaResource" but Third-party app is used other resource, that's the problem with used customize UI app. I'm still finding the solution about it

diogoasisti said:
thanks for reply, after some tests, it worked, installed v 87 framework, after update from xposed app to 89 framework, now framework is Green Active. The problem now is: i'm trying to install gravitybox mod, but when i open, said me system framework stopped, exiting, and not open. Why?
Click to expand...
Click to collapse
In xposed, Do you enable xposed status? if it is disable, it will be appeared in yellow color, gravitybox cant use because framework. You need to enable xposed status, restart and open gravitybox again.

dhvminh said:
In xposed, Do you enable xposed status? if it is disable, it will be appeared in yellow color, gravitybox cant use because framework. You need to enable xposed status, restart and open gravitybox again.
Click to expand...
Click to collapse
sure, I can't use the gravitybox because the nubia theme has the problem with third-party apps, can use other apps without about customize UI.

spboxer3 said:
sure, I can't use the gravitybox because the nubia theme has the problem with third-party apps, can use other apps without about customize UI.
Click to expand...
Click to collapse
I have just installed gravitybox, but dont know how to use.
Sent from my NX589J using Tapatalk

dhvminh said:
I have just installed gravitybox, but dont know how to use.
Sent from my NX589J using Tapatalk
Click to expand...
Click to collapse
emmm... can you open it? I can install gravitybox but I can't open it because the popup msg: "the gravitybox system not respond. close the gravitybox"

spboxer3 said:
emmm... can you open it? I can install gravitybox but I can't open it because the popup msg: "the gravitybox system not respond. close the gravitybox"
Click to expand...
Click to collapse
Open Xposed app, go to settings, and uncheck DISABLE RESOURCE HOOKS. Then you reboot the phone. Open GravityBox App and you will no got the same error. But the functions to customize, still not working because UI system, like the friends said.

I found the solution for this problem
this solution is from the nubia fourm post:
https://bbs.nubia.cn/forum.php?mod=viewthread&tid=1191715&extra=&highlight=xposed&page=1
you should uninstall the xposed v89 and use this custom package recovery zip (the first link)
Thanks "youyim" make this package.
I can used gravitybox now!!

spboxer3 said:
I found the solution for this problem
this solution is from the nubia fourm post:
https://bbs.nubia.cn/forum.php?mod=viewthread&tid=1191715&extra=&highlight=xposed&page=1
you should uninstall the xposed v89 and use this custom package recovery zip (the first link)
Thanks "youyim" make this package.
I can used gravitybox now!!
Click to expand...
Click to collapse
Thanks, i will try.

spboxer3 said:
I found the solution for this problem
this solution is from the nubia fourm post:
https://bbs.nubia.cn/forum.php?mod=viewthread&tid=1191715&extra=&highlight=xposed&page=1
you should uninstall the xposed v89 and use this custom package recovery zip (the first link)
Thanks "youyim" make this package.
I can used gravitybox now!!
Click to expand...
Click to collapse
For me, didn't work, don't open Gravitybox, error ressources framework, enabled and disabled ressources hook
Firmware V 2.17 CN
Link for Framework direct
megaDOTnz/#!CUdTzRib!oHG_SnslwhqnIy8ZSMzHDpXA89wiAq0ttGKKTLS85l8

[ROOT] ROOT Android 10 and 11 ROM GSI Treble

How to ROOT android 11 PHH Any ROM
This these steps have been tested in Havoc OS 4.1 Treble PHH
Credits SuperSu apk PHH
Credits Scripts @washinson
I upload files and Scripts from two threads to update this method. SuperSu apk from Phh Aosp 11 and Scripts from treble enabled fórum
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Steps]
1. download phh superuser zip
2. Flash PHH superuser in TWRP
3. Download supersu.apk
me.phh.superuser
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
4. Reboot your ROM android 11
5. install supersu.apk
6. test your ROOT with any app
7. the system is rooted
8. Enjoy
Original Thread credits PHH​

Root Android 11 treble ROM

Remember only flash phh superuser zip no root
Flash phh zip and after start your android 11 install SuperSu apk

not working on havoc os 4.1. Updater process ended with error 7

tauhid.91 said:
not working on havoc os 4.1. Updater process ended with error 7
Click to expand...
Click to collapse
I tested in my havoc official and root ok
Your system is AB or Aonly?
My system is Arm64 AB

hacker812c said:
I tested in my havoc official and root ok
Your system is AB or Aonly?
My system is Arm64 AB
Click to expand...
Click to collapse
Arm64 ab & I tried both vanilla & vndklite version but not working. Do i have to format my phone before flashing??

tauhid.91 said:
Arm64 ab & I tried both vanilla & vndklite version but not working. Do i have to format my phone before flashing??
Click to expand...
Click to collapse
I tested in vndklite 4.1
I tested havoc clean after wipe
Please backup always
Send image error in twrp
Two users j7 pro confirmed root
What is your phone?

hacker812c said:
I tested in vndklite 4.1
I tested havoc clean after wipe
Please backup always
Send image error in twrp
Two users j7 pro confirmed root
What is your phone?
Click to expand...
Click to collapse
Error: updater process ended with error 7

My Device: Samsung Galaxy A30

hacker812c said:
I tested in vndklite 4.1
I tested havoc clean after wipe
Please backup always
Send image error in twrp
Two users j7 pro confirmed root
What is your phone?
Click to expand...
Click to collapse
Btw I am not using any sd card

tauhid.91 said:
Error: updater process ended with error 7
Click to expand...
Click to collapse
Error in recovery test other recovery for a30
Remember recovery updated with support treble
My recovery is twrp 350

hacker812c said:
Error in recovery test other recovery for a30
Remember recovery updated with support treble
My recovery is twrp 350
Click to expand...
Click to collapse
Do I have to update my twrp version?

tauhid.91 said:
Do I have to update my twrp version?
Click to expand...
Click to collapse
What is your version twrp

hacker812c said:
What is your version twrp
Click to expand...
Click to collapse
3.4.0.0

tauhid.91 said:
3.4.0.0
Click to expand...
Click to collapse
Test twrp 350 in development threads xda a30

If run script perfectly reinstall twrp 340

hacker812c said:
If run script perfectly reinstall twrp 340
Click to expand...
Click to collapse
I am now flashing twrp 3.5.0 for my device

tauhid.91 said:
I am now flashing twrp 3.5.0 for my device
Click to expand...
Click to collapse
If possible press thanks in First thread my friend
Thank You i wait You repport for twrp

hacker812c said:
If possible press thanks in First thread my friend
Thank You i wait You repport for twrp
Click to expand...
Click to collapse
Thanks a lot Bro, After flashing twrp 3.5.0 root is now working....

tauhid.91 said:
Thanks a lot Bro, After flashing twrp 3.5.0 root is now working....
Click to expand...
Click to collapse
Thanks for participate